FUJIINU [FUJI INU] Token

Unable to find manual contract audit (e.g. Certik, PeckShield, Solidity...)

FUJIINU.addLiquidity(uint256,uint256) (#764-777) sends eth to arbitrary user
Dangerous calls:
- uniswapV2Router.addLiquidityETH{value: ethAmount}(address(this),tokenAmount,0,0,owner(),block.timestamp) (#769-776)
Ensure that an arbitrary user cannot withdraw unauthorized funds.

Additional information: link

Reentrancy in FUJIINU._transfer(address,address,uint256) (#638-695):
External calls:
- swapTokens(contractTokenBalance) (#690)
- uniswapV2Router.addLiquidityETH{value: ethAmount}(address(this),tokenAmount,0,0,owner(),block.timestamp) (#769-776)
- uniswapV2Router.swapExactTokensForETHSupportingFeeOnTransferTokens(tokenAmount,0,path,address(this),block.timestamp) (#752-758)
External calls sending eth:
- swapTokens(contractTokenBalance) (#690)
- wallet.transfer(amount) (#738)
- uniswapV2Router.addLiquidityETH{value: ethAmount}(address(this),tokenAmount,0,0,owner(),block.timestamp) (#769-776)
State variables written after the call(s):
- _tokenTransfer(from,to,amount,takeFee) (#694)
- _rOwned[address(this)] = _rOwned[address(this)].add(rLiquidity) (#890)
- _rOwned[sender] = _rOwned[sender].sub(rAmount) (#815)
- _rOwned[sender] = _rOwned[sender].sub(rAmount) (#806)
- _rOwned[recipient] = _rOwned[recipient].add(rTransferAmount) (#807)
- _rOwned[sender] = _rOwned[sender].sub(rAmount) (#826)
- _rOwned[sender] = _rOwned[sender].sub(rAmount) (#836)
- _rOwned[recipient] = _rOwned[recipient].add(rTransferAmount) (#817)
- _rOwned[recipient] = _rOwned[recipient].add(rTransferAmount) (#827)
- _rOwned[recipient] = _rOwned[recipient].add(rTransferAmount) (#838)
- _tokenTransfer(from,to,amount,takeFee) (#694)
- _rTotal = _rTotal.sub(rFee) (#845)
- _tokenTransfer(from,to,amount,takeFee) (#694)
- _tOwned[address(this)] = _tOwned[address(this)].add(tLiquidity) (#892)
- _tOwned[sender] = _tOwned[sender].sub(tAmount) (#825)
- _tOwned[sender] = _tOwned[sender].sub(tAmount) (#835)
- _tOwned[recipient] = _tOwned[recipient].add(tTransferAmount) (#816)
- _tOwned[recipient] = _tOwned[recipient].add(tTransferAmount) (#837)
Apply the check-effects-interactions pattern.

Additional information: link

FUJIINU.withdrawStuckTokens(IERC20,address) (#954-957) ignores return value by token.transfer(to,balance) (#956)
Use SafeERC20, or ensure that the transfer/transferFrom return value is checked.

Additional information: link

Combination 1: Reentrancy vulnerabilities + Functions that send Ether to arbitraty destination. Usual for scams. May be justified by some complex mechanics (e.g. rebase, reflections). DYOR & manual audit are advised.

Combination 2: Unchecked transfer + Functions that send Ether to arbitraty destination. Usual for scams. May be justified by some complex mechanics (e.g. rebase, reflections). DYOR & manual audit are advised.

Combination 3: Reentrancy vulnerabilities + Unchecked transfer vulnerability. Usual for scams. May be justified by some complex mechanics (e.g. rebase, reflections). DYOR & manual audit are advised.

FUJIINU.addLiquidity(uint256,uint256) (#764-777) ignores return value by uniswapV2Router.addLiquidityETH{value: ethAmount}(address(this),tokenAmount,0,0,owner(),block.timestamp) (#769-776)
Ensure that all the return values of the function calls are used.

Additional information: link

FUJIINU.excludeFromFee(address[]).i (#912) is a local variable never initialized
FUJIINU.manage_trusted(address[]).i (#945) is a local variable never initialized
FUJIINU.manage_Snipers(address[],bool).i (#937) is a local variable never initialized
Initialize all the variables. If a variable is meant to be initialized to zero, explicitly set it to zero to improve code readability.

Additional information: link

FUJIINU.setMaxWalletPercent_base1000(uint256) (#959-961) performs a multiplication on the result of a division:
-_maxWalletToken = _tTotal.div(1000).mul(maxWallPercent_base1000) (#960)
FUJIINU.slitherConstructorVariables() (#388-1018) performs a multiplication on the result of a division:
-_maxWalletToken = _tTotal.div(1000).mul(5) (#423)
FUJIINU.slitherConstructorVariables() (#388-1018) performs a multiplication on the result of a division:
-swapThreshold = _tTotal.div(10000).mul(5) (#446)
Consider ordering multiplication before division.

Additional information: link

FUJIINU.allowance(address,address).owner (#548) shadows:
- Ownable.owner() (#156-158) (function)
FUJIINU._approve(address,address,uint256).owner (#630) shadows:
- Ownable.owner() (#156-158) (function)
Rename the local variables that shadow another component.

Additional information: link

FUJIINU.openTrading(bool,uint256) (#495-503) should emit an event for:
- deadBlocks = _deadBlocks (#501)
FUJIINU.setMaxWalletPercent_base1000(uint256) (#959-961) should emit an event for:
- _maxWalletToken = _tTotal.div(1000).mul(maxWallPercent_base1000) (#960)
FUJIINU.setSwapSettings(uint256,uint256) (#967-969) should emit an event for:
- swapThreshold = (_tTotal * thresholdPercent) / thresholdDivisor (#968)
FUJIINU.setTaxesBuy(uint256,uint256,uint256,uint256,uint256) (#984-998) should emit an event for:
- _buyLiquidityFee = _liquidityFee (#986)
- _buyMarketingFee = _marketingFee (#987)
- _buyDevFee = _devFee (#988)
- _buyReflectionFee = _reflectionFee (#989)
- reflectionFee = _reflectionFee (#991)
- liquidityFee = _liquidityFee (#992)
- devFee = _devFee (#993)
- marketingFee = _marketingFee (#994)
- ecosystemFee = _ecosystemFee (#995)
- totalFee = liquidityFee.add(marketingFee).add(devFee).add(ecosystemFee) (#996)
FUJIINU.setTaxesSell(uint256,uint256,uint256,uint256) (#1008-1014) should emit an event for:
- _sellLiquidityFee = _liquidityFee (#1009)
- _sellMarketingFee = _marketingFee (#1010)
- _sellDevFee = _devFee (#1011)
- _sellReflectionFee = _reflectionFee (#1012)
Emit an event for critical parameter changes.

Additional information: link

FUJIINU.setWallets(address,address)._marketingWallet (#922) lacks a zero-check on :
- marketingWallet = address(_marketingWallet) (#923)
FUJIINU.setWallets(address,address)._devWallet (#922) lacks a zero-check on :
- devWallet = address(_devWallet) (#924)
FUJIINU.withDrawLeftoverETH(address).receipient (#950) lacks a zero-check on :
- receipient.transfer(address(this).balance) (#951)
Check that the address is not zero.

Additional information: link

FUJIINU.swapTokensForEth(uint256) (#743-761) has external calls inside a loop: path[1] = uniswapV2Router.WETH() (#747)
FUJIINU.swapTokensForEth(uint256) (#743-761) has external calls inside a loop: uniswapV2Router.swapExactTokensForETHSupportingFeeOnTransferTokens(tokenAmount,0,path,address(this),block.timestamp) (#752-758)
FUJIINU.sendETHToFee(uint256,address) (#737-739) has external calls inside a loop: wallet.transfer(amount) (#738)
FUJIINU.addLiquidity(uint256,uint256) (#764-777) has external calls inside a loop: uniswapV2Router.addLiquidityETH{value: ethAmount}(address(this),tokenAmount,0,0,owner(),block.timestamp) (#769-776)
Favor pull over push strategy for external calls.

Additional information: link

Reentrancy in FUJIINU._transfer(address,address,uint256) (#638-695):
External calls:
- swapTokens(contractTokenBalance) (#690)
- uniswapV2Router.addLiquidityETH{value: ethAmount}(address(this),tokenAmount,0,0,owner(),block.timestamp) (#769-776)
- uniswapV2Router.swapExactTokensForETHSupportingFeeOnTransferTokens(tokenAmount,0,path,address(this),block.timestamp) (#752-758)
External calls sending eth:
- swapTokens(contractTokenBalance) (#690)
- wallet.transfer(amount) (#738)
- uniswapV2Router.addLiquidityETH{value: ethAmount}(address(this),tokenAmount,0,0,owner(),block.timestamp) (#769-776)
State variables written after the call(s):
- _tokenTransfer(from,to,amount,takeFee) (#694)
- _tFeeTotal = _tFeeTotal.add(tFee) (#846)
- _tokenTransfer(from,to,amount,takeFee) (#694)
- currenttotalFee = 0 (#785)
- currenttotalFee = _previousTotalFee (#800)
- _tokenTransfer(from,to,amount,takeFee) (#694)
- reflectionFee = 0 (#784)
- reflectionFee = _previousReflectionFee (#799)
Reentrancy in FUJIINU.constructor() (#473-493):
External calls:
- uniswapV2Pair = IUniswapV2Factory(_uniswapV2Router.factory()).createPair(address(this),_uniswapV2Router.WETH()) (#477-478)
State variables written after the call(s):
- _isExcludedFromFee[owner()] = true (#482)
- _isExcludedFromFee[address(this)] = true (#483)
- _isMaxWalletExempt[owner()] = true (#484)
- _isMaxWalletExempt[address(this)] = true (#485)
- _isMaxWalletExempt[uniswapV2Pair] = true (#486)
- _isMaxWalletExempt[DEAD] = true (#487)
- _isTrusted[owner()] = true (#488)
- _isTrusted[uniswapV2Pair] = true (#489)
- authorizations[msg.sender] = true (#490)
- uniswapV2Router = _uniswapV2Router (#480)
Reentrancy in FUJIINU.setNewRouter(address) (#510-520):
External calls:
- uniswapV2Pair = IUniswapV2Factory(_newRouter.factory()).createPair(address(this),_newRouter.WETH()) (#514)
State variables written after the call(s):
- uniswapV2Router = _newRouter (#519)
Reentrancy in FUJIINU.swapTokens(uint256) (#697-735):
External calls:
- swapTokensForEth(amountToSwap) (#707)
- uniswapV2Router.swapExactTokensForETHSupportingFeeOnTransferTokens(tokenAmount,0,path,address(this),block.timestamp) (#752-758)
- addLiquidity(amountToLiquify,amountETHLiquidity) (#733)
- uniswapV2Router.addLiquidityETH{value: ethAmount}(address(this),tokenAmount,0,0,owner(),block.timestamp) (#769-776)
External calls sending eth:
- sendETHToFee(amountETHMarketing,marketingWallet) (#728)
- wallet.transfer(amount) (#738)
- sendETHToFee(amountETHEcosystem,ecosystemWallet) (#729)
- wallet.transfer(amount) (#738)
- sendETHToFee(amountETHdev,devWallet) (#730)
- wallet.transfer(amount) (#738)
- addLiquidity(amountToLiquify,amountETHLiquidity) (#733)
- uniswapV2Router.addLiquidityETH{value: ethAmount}(address(this),tokenAmount,0,0,owner(),block.timestamp) (#769-776)
State variables written after the call(s):
- addLiquidity(amountToLiquify,amountETHLiquidity) (#733)
- _allowances[owner][spender] = amount (#634)
Reentrancy in FUJIINU.transferFrom(address,address,uint256) (#557-561):
External calls:
- _transfer(sender,recipient,amount) (#558)
- uniswapV2Router.addLiquidityETH{value: ethAmount}(address(this),tokenAmount,0,0,owner(),block.timestamp) (#769-776)
- uniswapV2Router.swapExactTokensForETHSupportingFeeOnTransferTokens(tokenAmount,0,path,address(this),block.timestamp) (#752-758)
External calls sending eth:
- _transfer(sender,recipient,amount) (#558)
- wallet.transfer(amount) (#738)
- uniswapV2Router.addLiquidityETH{value: ethAmount}(address(this),tokenAmount,0,0,owner(),block.timestamp) (#769-776)
State variables written after the call(s):
- _approve(sender,_msgSender(),_allowances[sender][_msgSender()].sub(amount,ERC20: transfer amount exceeds allowance)) (#559)
- _allowances[owner][spender] = amount (#634)
Apply the check-effects-interactions pattern.

Additional information: link

Reentrancy in FUJIINU._transfer(address,address,uint256) (#638-695):
External calls:
- swapTokens(contractTokenBalance) (#690)
- uniswapV2Router.addLiquidityETH{value: ethAmount}(address(this),tokenAmount,0,0,owner(),block.timestamp) (#769-776)
- uniswapV2Router.swapExactTokensForETHSupportingFeeOnTransferTokens(tokenAmount,0,path,address(this),block.timestamp) (#752-758)
External calls sending eth:
- swapTokens(contractTokenBalance) (#690)
- wallet.transfer(amount) (#738)
- uniswapV2Router.addLiquidityETH{value: ethAmount}(address(this),tokenAmount,0,0,owner(),block.timestamp) (#769-776)
Event emitted after the call(s):
- Transfer(sender,recipient,tTransferAmount) (#810)
- _tokenTransfer(from,to,amount,takeFee) (#694)
- Transfer(sender,recipient,tTransferAmount) (#830)
- _tokenTransfer(from,to,amount,takeFee) (#694)
- Transfer(sender,recipient,tTransferAmount) (#820)
- _tokenTransfer(from,to,amount,takeFee) (#694)
- Transfer(sender,recipient,tTransferAmount) (#841)
- _tokenTransfer(from,to,amount,takeFee) (#694)
Reentrancy in FUJIINU.constructor() (#473-493):
External calls:
- uniswapV2Pair = IUniswapV2Factory(_uniswapV2Router.factory()).createPair(address(this),_uniswapV2Router.WETH()) (#477-478)
Event emitted after the call(s):
- Transfer(address(0),_msgSender(),_tTotal) (#492)
Reentrancy in FUJIINU.swapTokens(uint256) (#697-735):
External calls:
- swapTokensForEth(amountToSwap) (#707)
- uniswapV2Router.swapExactTokensForETHSupportingFeeOnTransferTokens(tokenAmount,0,path,address(this),block.timestamp) (#752-758)
- addLiquidity(amountToLiquify,amountETHLiquidity) (#733)
- uniswapV2Router.addLiquidityETH{value: ethAmount}(address(this),tokenAmount,0,0,owner(),block.timestamp) (#769-776)
External calls sending eth:
- sendETHToFee(amountETHMarketing,marketingWallet) (#728)
- wallet.transfer(amount) (#738)
- sendETHToFee(amountETHEcosystem,ecosystemWallet) (#729)
- wallet.transfer(amount) (#738)
- sendETHToFee(amountETHdev,devWallet) (#730)
- wallet.transfer(amount) (#738)
- addLiquidity(amountToLiquify,amountETHLiquidity) (#733)
- uniswapV2Router.addLiquidityETH{value: ethAmount}(address(this),tokenAmount,0,0,owner(),block.timestamp) (#769-776)
Event emitted after the call(s):
- Approval(owner,spender,amount) (#635)
- addLiquidity(amountToLiquify,amountETHLiquidity) (#733)
Reentrancy in FUJIINU.swapTokensForEth(uint256) (#743-761):
External calls:
- uniswapV2Router.swapExactTokensForETHSupportingFeeOnTransferTokens(tokenAmount,0,path,address(this),block.timestamp) (#752-758)
Event emitted after the call(s):
- SwapTokensForETH(tokenAmount,path) (#760)
Reentrancy in FUJIINU.transferFrom(address,address,uint256) (#557-561):
External calls:
- _transfer(sender,recipient,amount) (#558)
- uniswapV2Router.addLiquidityETH{value: ethAmount}(address(this),tokenAmount,0,0,owner(),block.timestamp) (#769-776)
- uniswapV2Router.swapExactTokensForETHSupportingFeeOnTransferTokens(tokenAmount,0,path,address(this),block.timestamp) (#752-758)
External calls sending eth:
- _transfer(sender,recipient,amount) (#558)
- wallet.transfer(amount) (#738)
- uniswapV2Router.addLiquidityETH{value: ethAmount}(address(this),tokenAmount,0,0,owner(),block.timestamp) (#769-776)
Event emitted after the call(s):
- Approval(owner,spender,amount) (#635)
- _approve(sender,_msgSender(),_allowances[sender][_msgSender()].sub(amount,ERC20: transfer amount exceeds allowance)) (#559)
Apply the check-effects-interactions pattern.

Additional information: link

Address.isContract(address) (#86-95) uses assembly
- INLINE ASM (#93)
Address._functionCallWithValue(address,bytes,uint256,string) (#123-140) uses assembly
- INLINE ASM (#132-135)
Do not use evm assembly.

Additional information: link

FUJIINU.includeInReward(address) (#617-628) has costly operations inside a loop:
- _excluded.pop() (#624)
FUJIINU._transfer(address,address,uint256) (#638-695) has costly operations inside a loop:
- currenttotalFee = totalFee (#664)
FUJIINU._transfer(address,address,uint256) (#638-695) has costly operations inside a loop:
- reflectionFee = _buyReflectionFee (#665)
FUJIINU._transfer(address,address,uint256) (#638-695) has costly operations inside a loop:
- currenttotalFee = _sellLiquidityFee.add(_sellMarketingFee).add(_sellDevFee) (#668)
FUJIINU._transfer(address,address,uint256) (#638-695) has costly operations inside a loop:
- reflectionFee = _sellReflectionFee (#669)
FUJIINU._transfer(address,address,uint256) (#638-695) has costly operations inside a loop:
- currenttotalFee = 0 (#679)
FUJIINU.lockTheSwap() (#466-470) has costly operations inside a loop:
- inSwap = true (#467)
FUJIINU.lockTheSwap() (#466-470) has costly operations inside a loop:
- inSwap = false (#469)
FUJIINU._tokenTransfer(address,address,uint256,bool) (#779-802) has costly operations inside a loop:
- reflectionFee = 0 (#784)
FUJIINU._tokenTransfer(address,address,uint256,bool) (#779-802) has costly operations inside a loop:
- currenttotalFee = 0 (#785)
FUJIINU._reflectFee(uint256,uint256) (#844-847) has costly operations inside a loop:
- _rTotal = _rTotal.sub(rFee) (#845)
FUJIINU._reflectFee(uint256,uint256) (#844-847) has costly operations inside a loop:
- _tFeeTotal = _tFeeTotal.add(tFee) (#846)
FUJIINU._tokenTransfer(address,address,uint256,bool) (#779-802) has costly operations inside a loop:
- reflectionFee = _previousReflectionFee (#799)
FUJIINU._tokenTransfer(address,address,uint256,bool) (#779-802) has costly operations inside a loop:
- currenttotalFee = _previousTotalFee (#800)
Use a local variable to hold the loop computation result.

Additional information: link

Address._functionCallWithValue(address,bytes,uint256,string) (#123-140) is never used and should be removed
Address.functionCall(address,bytes) (#106-108) is never used and should be removed
Address.functionCall(address,bytes,string) (#110-112) is never used and should be removed
Address.functionCallWithValue(address,bytes,uint256) (#114-116) is never used and should be removed
Address.functionCallWithValue(address,bytes,uint256,string) (#118-121) is never used and should be removed
Address.isContract(address) (#86-95) is never used and should be removed
Address.sendValue(address,uint256) (#97-103) is never used and should be removed
Context._msgData() (#9-12) is never used and should be removed
FUJIINU.transferToAddressETH(address,uint256) (#928-930) is never used and should be removed
SafeMath.mod(uint256,uint256) (#74-76) is never used and should be removed
SafeMath.mod(uint256,uint256,string) (#78-81) is never used and should be removed
Remove unused functions.

Additional information: link

FUJIINU._tTotal (#416) is set pre-construction with a non-constant function or state variable:
- 1000000000000 * 10 ** _decimals
FUJIINU._rTotal (#417) is set pre-construction with a non-constant function or state variable:
- (MAX - (MAX % _tTotal))
FUJIINU._maxWalletToken (#423) is set pre-construction with a non-constant function or state variable:
- _tTotal.div(1000).mul(5)
FUJIINU.liquidityFee (#436) is set pre-construction with a non-constant function or state variable:
- _buyLiquidityFee
FUJIINU.marketingFee (#437) is set pre-construction with a non-constant function or state variable:
- _buyMarketingFee
FUJIINU.devFee (#438) is set pre-construction with a non-constant function or state variable:
- _buyDevFee
FUJIINU.reflectionFee (#439) is set pre-construction with a non-constant function or state variable:
- _buyReflectionFee
FUJIINU.totalFee (#442-443) is set pre-construction with a non-constant function or state variable:
- liquidityFee.add(marketingFee).add(devFee).add(ecosystemFee)
FUJIINU.currenttotalFee (#444) is set pre-construction with a non-constant function or state variable:
- totalFee
FUJIINU.swapThreshold (#446) is set pre-construction with a non-constant function or state variable:
- _tTotal.div(10000).mul(5)
Remove any initialization of state variables via non-constant state variables or function calls. If variables must be set upon contract deployment, locate initialization in the constructor instead.

Additional information: link

Low level call in Address.sendValue(address,uint256) (#97-103):
- (success) = recipient.call{value: amount}() (#101)
Low level call in Address._functionCallWithValue(address,bytes,uint256,string) (#123-140):
- (success,returndata) = target.call{value: weiValue}(data) (#126)
Avoid low-level calls. Check the call success. If the call is meant for a contract, check for code existence

Additional information: link

Function IUniswapV2Pair.DOMAIN_SEPARATOR() (#213) is not in mixedCase
Function IUniswapV2Pair.PERMIT_TYPEHASH() (#214) is not in mixedCase
Function IUniswapV2Pair.MINIMUM_LIQUIDITY() (#230) is not in mixedCase
Function IUniswapV2Router01.WETH() (#251) is not in mixedCase
Parameter FUJIINU.openTrading(bool,uint256)._status (#495) is not in mixedCase
Parameter FUJIINU.openTrading(bool,uint256)._deadBlocks (#495) is not in mixedCase
Parameter FUJIINU.setZeroBuyTaxmode(bool)._status (#506) is not in mixedCase
Parameter FUJIINU.calculateTaxFee(uint256)._amount (#895) is not in mixedCase
Parameter FUJIINU.calculateLiquidityFee(uint256)._amount (#901) is not in mixedCase
Parameter FUJIINU.setWallets(address,address)._marketingWallet (#922) is not in mixedCase
Parameter FUJIINU.setWallets(address,address)._devWallet (#922) is not in mixedCase
Function FUJIINU.manage_Snipers(address[],bool) (#936-942) is not in mixedCase
Function FUJIINU.manage_trusted(address[]) (#944-948) is not in mixedCase
Function FUJIINU.setMaxWalletPercent_base1000(uint256) (#959-961) is not in mixedCase
Parameter FUJIINU.setMaxWalletPercent_base1000(uint256).maxWallPercent_base1000 (#959) is not in mixedCase
Parameter FUJIINU.setMaxWalletExempt(address)._addr (#963) is not in mixedCase
Parameter FUJIINU.setTaxesBuy(uint256,uint256,uint256,uint256,uint256)._reflectionFee (#984) is not in mixedCase
Parameter FUJIINU.setTaxesBuy(uint256,uint256,uint256,uint256,uint256)._liquidityFee (#984) is not in mixedCase
Parameter FUJIINU.setTaxesBuy(uint256,uint256,uint256,uint256,uint256)._marketingFee (#984) is not in mixedCase
Parameter FUJIINU.setTaxesBuy(uint256,uint256,uint256,uint256,uint256)._devFee (#984) is not in mixedCase
Parameter FUJIINU.setTaxesBuy(uint256,uint256,uint256,uint256,uint256)._ecosystemFee (#984) is not in mixedCase
Parameter FUJIINU.setTaxesSell(uint256,uint256,uint256,uint256)._reflectionFee (#1008) is not in mixedCase
Parameter FUJIINU.setTaxesSell(uint256,uint256,uint256,uint256)._liquidityFee (#1008) is not in mixedCase
Parameter FUJIINU.setTaxesSell(uint256,uint256,uint256,uint256)._marketingFee (#1008) is not in mixedCase
Parameter FUJIINU.setTaxesSell(uint256,uint256,uint256,uint256)._devFee (#1008) is not in mixedCase
Variable FUJIINU.DEAD (#411) is not in mixedCase
Variable FUJIINU._maxWalletToken (#423) is not in mixedCase
Variable FUJIINU._buyLiquidityFee (#425) is not in mixedCase
Variable FUJIINU._buyDevFee (#426) is not in mixedCase
Variable FUJIINU._buyMarketingFee (#427) is not in mixedCase
Variable FUJIINU._buyReflectionFee (#428) is not in mixedCase
Variable FUJIINU._sellLiquidityFee (#430) is not in mixedCase
Variable FUJIINU._sellMarketingFee (#431) is not in mixedCase
Variable FUJIINU._sellDevFee (#432) is not in mixedCase
Variable FUJIINU._sellReflectionFee (#433) is not in mixedCase
Follow the Solidity naming convention.

Additional information: link

Redundant expression "this (#10)" inContext (#4-13)
Remove redundant statements if they congest code but offer no value.

Additional information: link

Reentrancy in FUJIINU._transfer(address,address,uint256) (#638-695):
External calls:
- swapTokens(contractTokenBalance) (#690)
- wallet.transfer(amount) (#738)
External calls sending eth:
- swapTokens(contractTokenBalance) (#690)
- wallet.transfer(amount) (#738)
- uniswapV2Router.addLiquidityETH{value: ethAmount}(address(this),tokenAmount,0,0,owner(),block.timestamp) (#769-776)
State variables written after the call(s):
- _tokenTransfer(from,to,amount,takeFee) (#694)
- _rOwned[address(this)] = _rOwned[address(this)].add(rLiquidity) (#890)
- _rOwned[sender] = _rOwned[sender].sub(rAmount) (#815)
- _rOwned[sender] = _rOwned[sender].sub(rAmount) (#806)
- _rOwned[recipient] = _rOwned[recipient].add(rTransferAmount) (#807)
- _rOwned[sender] = _rOwned[sender].sub(rAmount) (#826)
- _rOwned[sender] = _rOwned[sender].sub(rAmount) (#836)
- _rOwned[recipient] = _rOwned[recipient].add(rTransferAmount) (#817)
- _rOwned[recipient] = _rOwned[recipient].add(rTransferAmount) (#827)
- _rOwned[recipient] = _rOwned[recipient].add(rTransferAmount) (#838)
- _tokenTransfer(from,to,amount,takeFee) (#694)
- _rTotal = _rTotal.sub(rFee) (#845)
- _tokenTransfer(from,to,amount,takeFee) (#694)
- _tFeeTotal = _tFeeTotal.add(tFee) (#846)
- _tokenTransfer(from,to,amount,takeFee) (#694)
- _tOwned[address(this)] = _tOwned[address(this)].add(tLiquidity) (#892)
- _tOwned[sender] = _tOwned[sender].sub(tAmount) (#825)
- _tOwned[sender] = _tOwned[sender].sub(tAmount) (#835)
- _tOwned[recipient] = _tOwned[recipient].add(tTransferAmount) (#816)
- _tOwned[recipient] = _tOwned[recipient].add(tTransferAmount) (#837)
- _tokenTransfer(from,to,amount,takeFee) (#694)
- currenttotalFee = 0 (#785)
- currenttotalFee = _previousTotalFee (#800)
- _tokenTransfer(from,to,amount,takeFee) (#694)
- reflectionFee = 0 (#784)
- reflectionFee = _previousReflectionFee (#799)
Event emitted after the call(s):
- Transfer(sender,recipient,tTransferAmount) (#810)
- _tokenTransfer(from,to,amount,takeFee) (#694)
- Transfer(sender,recipient,tTransferAmount) (#820)
- _tokenTransfer(from,to,amount,takeFee) (#694)
- Transfer(sender,recipient,tTransferAmount) (#830)
- _tokenTransfer(from,to,amount,takeFee) (#694)
- Transfer(sender,recipient,tTransferAmount) (#841)
- _tokenTransfer(from,to,amount,takeFee) (#694)
Reentrancy in FUJIINU.swapTokens(uint256) (#697-735):
External calls:
- sendETHToFee(amountETHMarketing,marketingWallet) (#728)
- wallet.transfer(amount) (#738)
- sendETHToFee(amountETHEcosystem,ecosystemWallet) (#729)
- wallet.transfer(amount) (#738)
- sendETHToFee(amountETHdev,devWallet) (#730)
- wallet.transfer(amount) (#738)
External calls sending eth:
- sendETHToFee(amountETHMarketing,marketingWallet) (#728)
- wallet.transfer(amount) (#738)
- sendETHToFee(amountETHEcosystem,ecosystemWallet) (#729)
- wallet.transfer(amount) (#738)
- sendETHToFee(amountETHdev,devWallet) (#730)
- wallet.transfer(amount) (#738)
- addLiquidity(amountToLiquify,amountETHLiquidity) (#733)
- uniswapV2Router.addLiquidityETH{value: ethAmount}(address(this),tokenAmount,0,0,owner(),block.timestamp) (#769-776)
State variables written after the call(s):
- addLiquidity(amountToLiquify,amountETHLiquidity) (#733)
- _allowances[owner][spender] = amount (#634)
Event emitted after the call(s):
- Approval(owner,spender,amount) (#635)
- addLiquidity(amountToLiquify,amountETHLiquidity) (#733)
Reentrancy in FUJIINU.transferFrom(address,address,uint256) (#557-561):
External calls:
- _transfer(sender,recipient,amount) (#558)
- wallet.transfer(amount) (#738)
External calls sending eth:
- _transfer(sender,recipient,amount) (#558)
- wallet.transfer(amount) (#738)
- uniswapV2Router.addLiquidityETH{value: ethAmount}(address(this),tokenAmount,0,0,owner(),block.timestamp) (#769-776)
State variables written after the call(s):
- _approve(sender,_msgSender(),_allowances[sender][_msgSender()].sub(amount,ERC20: transfer amount exceeds allowance)) (#559)
- _allowances[owner][spender] = amount (#634)
Event emitted after the call(s):
- Approval(owner,spender,amount) (#635)
- _approve(sender,_msgSender(),_allowances[sender][_msgSender()].sub(amount,ERC20: transfer amount exceeds allowance)) (#559)
Apply the check-effects-interactions pattern.

Additional information: link

Variable IUniswapV2Router01.addLiquidity(address,address,uint256,uint256,uint256,uint256,address,uint256).amountADesired (#256) is too similar to IUniswapV2Router01.addLiquidity(address,address,uint256,uint256,uint256,uint256,address,uint256).amountBDesired (#257)
Variable FUJIINU._transferToExcluded(address,address,uint256).rTransferAmount (#814) is too similar to FUJIINU._transferBothExcluded(address,address,uint256).tTransferAmount (#834)
Variable FUJIINU._transferStandard(address,address,uint256).rTransferAmount (#805) is too similar to FUJIINU._getTValues(uint256).tTransferAmount (#858)
Variable FUJIINU._transferFromExcluded(address,address,uint256).rTransferAmount (#824) is too similar to FUJIINU._getTValues(uint256).tTransferAmount (#858)
Variable FUJIINU._getRValues(uint256,uint256,uint256,uint256).rTransferAmount (#866) is too similar to FUJIINU._getTValues(uint256).tTransferAmount (#858)
Variable FUJIINU._transferBothExcluded(address,address,uint256).rTransferAmount (#834) is too similar to FUJIINU._transferBothExcluded(address,address,uint256).tTransferAmount (#834)
Variable FUJIINU._getValues(uint256).rTransferAmount (#851) is too similar to FUJIINU._transferBothExcluded(address,address,uint256).tTransferAmount (#834)
Variable FUJIINU._transferToExcluded(address,address,uint256).rTransferAmount (#814) is too similar to FUJIINU._transferFromExcluded(address,address,uint256).tTransferAmount (#824)
Variable FUJIINU._transferStandard(address,address,uint256).rTransferAmount (#805) is too similar to FUJIINU._transferStandard(address,address,uint256).tTransferAmount (#805)
Variable FUJIINU._getValues(uint256).rTransferAmount (#851) is too similar to FUJIINU._transferFromExcluded(address,address,uint256).tTransferAmount (#824)
Variable FUJIINU._transferStandard(address,address,uint256).rTransferAmount (#805) is too similar to FUJIINU._transferBothExcluded(address,address,uint256).tTransferAmount (#834)
Variable FUJIINU.reflectionFromToken(uint256,bool).rTransferAmount (#597) is too similar to FUJIINU._transferBothExcluded(address,address,uint256).tTransferAmount (#834)
Variable FUJIINU._transferToExcluded(address,address,uint256).rTransferAmount (#814) is too similar to FUJIINU._getTValues(uint256).tTransferAmount (#858)
Variable FUJIINU._transferFromExcluded(address,address,uint256).rTransferAmount (#824) is too similar to FUJIINU._transferBothExcluded(address,address,uint256).tTransferAmount (#834)
Variable FUJIINU._getRValues(uint256,uint256,uint256,uint256).rTransferAmount (#866) is too similar to FUJIINU._transferBothExcluded(address,address,uint256).tTransferAmount (#834)
Variable FUJIINU._transferStandard(address,address,uint256).rTransferAmount (#805) is too similar to FUJIINU._transferFromExcluded(address,address,uint256).tTransferAmount (#824)
Variable FUJIINU._getValues(uint256).rTransferAmount (#851) is too similar to FUJIINU._getTValues(uint256).tTransferAmount (#858)
Variable FUJIINU._transferFromExcluded(address,address,uint256).rTransferAmount (#824) is too similar to FUJIINU._transferFromExcluded(address,address,uint256).tTransferAmount (#824)
Variable FUJIINU._transferFromExcluded(address,address,uint256).rTransferAmount (#824) is too similar to FUJIINU._transferToExcluded(address,address,uint256).tTransferAmount (#814)
Variable FUJIINU._getValues(uint256).rTransferAmount (#851) is too similar to FUJIINU._getValues(uint256).tTransferAmount (#850)
Variable FUJIINU._transferStandard(address,address,uint256).rTransferAmount (#805) is too similar to FUJIINU._getValues(uint256).tTransferAmount (#850)
Variable FUJIINU._getValues(uint256).rTransferAmount (#851) is too similar to FUJIINU._transferStandard(address,address,uint256).tTransferAmount (#805)
Variable FUJIINU.reflectionFromToken(uint256,bool).rTransferAmount (#597) is too similar to FUJIINU._getValues(uint256).tTransferAmount (#850)
Variable FUJIINU._transferBothExcluded(address,address,uint256).rTransferAmount (#834) is too similar to FUJIINU._transferFromExcluded(address,address,uint256).tTransferAmount (#824)
Variable FUJIINU._getRValues(uint256,uint256,uint256,uint256).rTransferAmount (#866) is too similar to FUJIINU._getValues(uint256).tTransferAmount (#850)
Variable FUJIINU._transferBothExcluded(address,address,uint256).rTransferAmount (#834) is too similar to FUJIINU._getValues(uint256).tTransferAmount (#850)
Variable FUJIINU._getValues(uint256).rTransferAmount (#851) is too similar to FUJIINU._transferToExcluded(address,address,uint256).tTransferAmount (#814)
Variable FUJIINU._getRValues(uint256,uint256,uint256,uint256).rTransferAmount (#866) is too similar to FUJIINU._transferStandard(address,address,uint256).tTransferAmount (#805)
Variable FUJIINU.reflectionFromToken(uint256,bool).rTransferAmount (#597) is too similar to FUJIINU._transferStandard(address,address,uint256).tTransferAmount (#805)
Variable FUJIINU._transferBothExcluded(address,address,uint256).rTransferAmount (#834) is too similar to FUJIINU._transferStandard(address,address,uint256).tTransferAmount (#805)
Variable FUJIINU._transferStandard(address,address,uint256).rTransferAmount (#805) is too similar to FUJIINU._transferToExcluded(address,address,uint256).tTransferAmount (#814)
Variable FUJIINU._transferToExcluded(address,address,uint256).rTransferAmount (#814) is too similar to FUJIINU._getValues(uint256).tTransferAmount (#850)
Variable FUJIINU._getRValues(uint256,uint256,uint256,uint256).rTransferAmount (#866) is too similar to FUJIINU._transferToExcluded(address,address,uint256).tTransferAmount (#814)
Variable FUJIINU._transferFromExcluded(address,address,uint256).rTransferAmount (#824) is too similar to FUJIINU._getValues(uint256).tTransferAmount (#850)
Variable FUJIINU.reflectionFromToken(uint256,bool).rTransferAmount (#597) is too similar to FUJIINU._transferToExcluded(address,address,uint256).tTransferAmount (#814)
Variable FUJIINU.reflectionFromToken(uint256,bool).rTransferAmount (#597) is too similar to FUJIINU._getTValues(uint256).tTransferAmount (#858)
Variable FUJIINU._transferToExcluded(address,address,uint256).rTransferAmount (#814) is too similar to FUJIINU._transferStandard(address,address,uint256).tTransferAmount (#805)
Variable FUJIINU._transferBothExcluded(address,address,uint256).rTransferAmount (#834) is too similar to FUJIINU._transferToExcluded(address,address,uint256).tTransferAmount (#814)
Variable FUJIINU._transferBothExcluded(address,address,uint256).rTransferAmount (#834) is too similar to FUJIINU._getTValues(uint256).tTransferAmount (#858)
Variable FUJIINU._transferFromExcluded(address,address,uint256).rTransferAmount (#824) is too similar to FUJIINU._transferStandard(address,address,uint256).tTransferAmount (#805)
Variable FUJIINU.reflectionFromToken(uint256,bool).rTransferAmount (#597) is too similar to FUJIINU._transferFromExcluded(address,address,uint256).tTransferAmount (#824)
Variable FUJIINU._transferToExcluded(address,address,uint256).rTransferAmount (#814) is too similar to FUJIINU._transferToExcluded(address,address,uint256).tTransferAmount (#814)
Variable FUJIINU._getRValues(uint256,uint256,uint256,uint256).rTransferAmount (#866) is too similar to FUJIINU._transferFromExcluded(address,address,uint256).tTransferAmount (#824)
Prevent variables from having similar names.

Additional information: link

FUJIINU.slitherConstructorVariables() (#388-1018) uses literals with too many digits:
- DEAD = 0x000000000000000000000000000000000000dEaD (#411)
FUJIINU.slitherConstructorVariables() (#388-1018) uses literals with too many digits:
- _tTotal = 1000000000000 * 10 ** _decimals (#416)
Use: Ether suffix, Time suffix, or The scientific notation

Additional information: link

Ownable._previousOwner (#145) is never used in FUJIINU (#388-1018)
Ownable._lockTime (#146) is never used in FUJIINU (#388-1018)
Remove unused state variables.

Additional information: link

FUJIINU.DEAD (#411) should be constant
FUJIINU._decimals (#413) should be constant
FUJIINU._name (#420) should be constant
FUJIINU._symbol (#421) should be constant
FUJIINU.ecosystemWallet (#393) should be constant
Ownable._lockTime (#146) should be constant
Ownable._previousOwner (#145) should be constant
Add the constant attributes to state variables that never change.

Additional information: link

renounceOwnership() should be declared external:
- Ownable.renounceOwnership() (#165-168)
transferOwnership(address) should be declared external:
- Ownable.transferOwnership(address) (#170-174)
name() should be declared external:
- FUJIINU.name() (#522-524)
symbol() should be declared external:
- FUJIINU.symbol() (#526-528)
decimals() should be declared external:
- FUJIINU.decimals() (#530-532)
totalSupply() should be declared external:
- FUJIINU.totalSupply() (#534-536)
transfer(address,uint256) should be declared external:
- FUJIINU.transfer(address,uint256) (#543-546)
allowance(address,address) should be declared external:
- FUJIINU.allowance(address,address) (#548-550)
approve(address,uint256) should be declared external:
- FUJIINU.approve(address,uint256) (#552-555)
transferFrom(address,address,uint256) should be declared external:
- FUJIINU.transferFrom(address,address,uint256) (#557-561)
increaseAllowance(address,uint256) should be declared external:
- FUJIINU.increaseAllowance(address,uint256) (#563-566)
decreaseAllowance(address,uint256) should be declared external:
- FUJIINU.decreaseAllowance(address,uint256) (#568-571)
isExcludedFromReward(address) should be declared external:
- FUJIINU.isExcludedFromReward(address) (#573-575)
totalFees() should be declared external:
- FUJIINU.totalFees() (#577-579)
deliver(uint256) should be declared external:
- FUJIINU.deliver(uint256) (#581-588)
reflectionFromToken(uint256,bool) should be declared external:
- FUJIINU.reflectionFromToken(uint256,bool) (#591-600)
excludeMultiple(address) should be declared external:
- FUJIINU.excludeMultiple(address) (#907-909)
excludeFromFee(address[]) should be declared external:
- FUJIINU.excludeFromFee(address[]) (#911-915)
includeInFee(address) should be declared external:
- FUJIINU.includeInFee(address) (#918-920)
isSniper(address) should be declared external:
- FUJIINU.isSniper(address) (#932-934)
manage_Snipers(address[],bool) should be declared external:
- FUJIINU.manage_Snipers(address[],bool) (#936-942)
manage_trusted(address[]) should be declared external:
- FUJIINU.manage_trusted(address[]) (#944-948)
withDrawLeftoverETH(address) should be declared external:
- FUJIINU.withDrawLeftoverETH(address) (#950-952)
withdrawStuckTokens(IERC20,address) should be declared external:
- FUJIINU.withdrawStuckTokens(IERC20,address) (#954-957)
authorize(address) should be declared external:
- FUJIINU.authorize(address) (#1000-1002)
unauthorize(address) should be declared external:
- FUJIINU.unauthorize(address) (#1004-1006)
Use the external attribute for functions never called from the contract.

Additional information: link

Average PancakeSwap trading volume, liqudity, number of swaps are extremely low. Token seems to be dead.

Number of Binance Smart Chain (BSC) token holders is low.

Token is deployed only at one blockchain

Token has only one trading pair

Unable to find PancakeSwap trading pair to compute liquidity.

Unable to find PancakeSwap trading pair to compute volume.

Unable to find PancakeSwap trading pair to compute number of swaps.

BscScan page for the token does not contain additional info: website, socials, description, etc.

Additional information: link

Unable to find token on CoinGecko

Additional information: link

Unable to find token on CoinMarketCap

Additional information: link

Unable to find token/project description on the website or on BscScan, CoinMarketCap

Unable to find token contract audit

Unable to find audit link on the website

Unable to find whitepaper link on the website

Unable to find Twitter link on the website

Unable to find token on CoinHunt

Additional information: link

Unable to find code repository for the project

Young tokens have high risks of scam / price dump / death

Young tokens have high risks of scam / price dump / death

Token has no active CoinGecko listing / rank

Token has no active CoinMarketCap listing / rank