Unable to find manual contract audit (e.g. Certik, PeckShield, Solidity...)
PinscherCoin.swapBack() (#693-756) sends eth to arbitrary user
Dangerous calls:
- (tmpSuccess) = address(marketingFeeReceiver).call{gas: 30000,value: amountBNBMarketing}() (#726)
- (tmpBuybackSuccess) = address(buyBackFeeReceiver).call{gas: 30000,value: amountBNBBuyback}() (#730)
- (tmpSuccess) = address(marketingFeeReceiver).call{gas: 30000,value: amountBNB}() (#753)
Ensure that an arbitrary user cannot withdraw unauthorized funds.
Additional information: link
Reentrancy in PinscherCoin._transferFrom(address,address,uint256) (#579-630):
External calls:
- swapBack() (#608)
- router.swapExactTokensForETHSupportingFeeOnTransferTokens(amountToSwap,0,path,address(this),block.timestamp) (#709-715)
- distributor.deposit{value: amountBNBReflection}() (#723)
- (tmpSuccess) = address(marketingFeeReceiver).call{gas: 30000,value: amountBNBMarketing}() (#726)
- (tmpBuybackSuccess) = address(buyBackFeeReceiver).call{gas: 30000,value: amountBNBBuyback}() (#730)
- router.addLiquidityETH{value: amountBNBLiquidity}(address(this),amountToLiquify,0,0,autoLiquidityReceiver,block.timestamp) (#734-741)
- router.swapExactTokensForETHSupportingFeeOnTransferTokens(balanceOf(address(this)),0,path,address(this),block.timestamp) (#745-751)
- (tmpSuccess) = address(marketingFeeReceiver).call{gas: 30000,value: amountBNB}() (#753)
External calls sending eth:
- swapBack() (#608)
- distributor.deposit{value: amountBNBReflection}() (#723)
- (tmpSuccess) = address(marketingFeeReceiver).call{gas: 30000,value: amountBNBMarketing}() (#726)
- (tmpBuybackSuccess) = address(buyBackFeeReceiver).call{gas: 30000,value: amountBNBBuyback}() (#730)
- router.addLiquidityETH{value: amountBNBLiquidity}(address(this),amountToLiquify,0,0,autoLiquidityReceiver,block.timestamp) (#734-741)
- (tmpSuccess) = address(marketingFeeReceiver).call{gas: 30000,value: amountBNB}() (#753)
State variables written after the call(s):
- _balances[sender] = _balances[sender].sub(amount,Insufficient Balance) (#611)
- _balances[recipient] = _balances[recipient].add(amountReceived) (#614)
- amountReceived = takeFee(sender,recipient,amount) (#613)
- _balances[address(this)] = _balances[address(this)].add(feeAmount) (#654)
- _balances[address(this)] = _balances[address(this)].add(feeAmount) (#658)
Apply the check-effects-interactions pattern.
Additional information: link
DividendDistributor.distributeDividend(address) (#386-397) ignores return value by REWARD.transfer(shareholder,amount) (#392)
PinscherCoin.recoverWrongTokens(address,uint256) (#676-680) ignores return value by IBEP20(_tokenAddress).transfer(address(msg.sender),_tokenAmount) (#678)
Use SafeERC20, or ensure that the transfer/transferFrom return value is checked.
Additional information: link
Too many vulnerabilities (Unchecked transfer, Reentrancy vulnerability, etc.). High risk of a scam. DYOR & manual audit are advised.
PinscherCoin.swapBack().tmpSuccess (#726) is written in both
(tmpSuccess) = address(marketingFeeReceiver).call{gas: 30000,value: amountBNBMarketing}() (#726)
tmpSuccess = false (#727)
PinscherCoin.swapBack().tmpBuybackSuccess (#730) is written in both
(tmpBuybackSuccess) = address(buyBackFeeReceiver).call{gas: 30000,value: amountBNBBuyback}() (#730)
tmpBuybackSuccess = false (#731)
Fix or remove the writes.
Additional information: link
Combination 1: Reentrancy vulnerabilities + Functions that send Ether to arbitraty destination. Usual for scams. May be justified by some complex mechanics (e.g. rebase, reflections). DYOR & manual audit are advised.
Combination 2: Unchecked transfer + Functions that send Ether to arbitraty destination. Usual for scams. May be justified by some complex mechanics (e.g. rebase, reflections). DYOR & manual audit are advised.
Combination 3: Reentrancy vulnerabilities + Unchecked transfer vulnerability. Usual for scams. May be justified by some complex mechanics (e.g. rebase, reflections). DYOR & manual audit are advised.
Reentrancy in DividendDistributor.distributeDividend(address) (#386-397):
External calls:
- REWARD.transfer(shareholder,amount) (#392)
State variables written after the call(s):
- shares[shareholder].totalRealised = shares[shareholder].totalRealised.add(amount) (#394)
- shares[shareholder].totalExcluded = getCumulativeDividends(shares[shareholder].amount) (#395)
Reentrancy in DividendDistributor.process(uint256) (#355-379):
External calls:
- distributeDividend(shareholders[currentIndex]) (#371)
- REWARD.transfer(shareholder,amount) (#392)
State variables written after the call(s):
- currentIndex ++ (#376)
Reentrancy in DividendDistributor.setShare(address,uint256) (#319-333):
External calls:
- distributeDividend(shareholder) (#321)
- REWARD.transfer(shareholder,amount) (#392)
State variables written after the call(s):
- shares[shareholder].amount = amount (#331)
- shares[shareholder].totalExcluded = getCumulativeDividends(shares[shareholder].amount) (#332)
Apply the check-effects-interactions pattern.
Additional information: link
PinscherCoin.swapBack() (#693-756) ignores return value by router.addLiquidityETH{value: amountBNBLiquidity}(address(this),amountToLiquify,0,0,autoLiquidityReceiver,block.timestamp) (#734-741)
Ensure that all the return values of the function calls are used.
Additional information: link
DividendDistributor.setDistributionCriteria(uint256,uint256) (#314-317) should emit an event for:
- minPeriod = _minPeriod (#315)
- minDistribution = _minDistribution (#316)
PinscherCoin.setTxLimit(uint256) (#758-760) should emit an event for:
- _maxTxAmount = amount (#759)
PinscherCoin.setTransferTaxRate(uint256) (#790-793) should emit an event for:
- transferTaxRate = _transferTaxRate (#791)
PinscherCoin.setFeeDistribution(uint256,uint256,uint256,uint256,uint256,uint256) (#798-807) should emit an event for:
- liquidityFee = _liquidityFee (#799)
- reflectionFee = _reflectionFee (#800)
- marketingFee = _marketingFee (#801)
- buyBackFee = _buyBackFee (#802)
- burnFee = _burnFee (#803)
- totalFee = _liquidityFee.add(_reflectionFee).add(_marketingFee).add(_buyBackFee).add(_burnFee) (#804)
- feeDenominator = _feeDenominator (#805)
PinscherCoin.setTargetLiquidity(uint256,uint256) (#820-823) should emit an event for:
- targetLiquidity = _target (#821)
- targetLiquidityDenominator = _denominator (#822)
Emit an event for critical parameter changes.
Additional information: link
Auth.transferOwnership(address).adr (#194) lacks a zero-check on :
- owner = adr (#195)
PinscherCoin.setFeeReceivers(address,address,address)._autoLiquidityReceiver (#809) lacks a zero-check on :
- autoLiquidityReceiver = _autoLiquidityReceiver (#810)
PinscherCoin.setFeeReceivers(address,address,address)._marketingFeeReceiver (#809) lacks a zero-check on :
- marketingFeeReceiver = _marketingFeeReceiver (#811)
PinscherCoin.setFeeReceivers(address,address,address)._buyBackFeeReceiver (#809) lacks a zero-check on :
- buyBackFeeReceiver = _buyBackFeeReceiver (#812)
Check that the address is not zero.
Additional information: link
DividendDistributor.distributeDividend(address) (#386-397) has external calls inside a loop: REWARD.transfer(shareholder,amount) (#392)
PinscherCoin.airdrop(address,address[],uint256[]) (#852-875) has external calls inside a loop: distributor.setShare(addresses[i_scope_0],_balances[addresses[i_scope_0]]) (#867)
Favor pull over push strategy for external calls.
Additional information: link
Variable 'PinscherCoin.swapBack().tmpSuccess (#726)' in PinscherCoin.swapBack() (#693-756) potentially used before declaration: (tmpSuccess) = address(marketingFeeReceiver).call{gas: 30000,value: amountBNB}() (#753)
Move all variable declarations prior to any usage of the variable, and ensure that reaching a variable declaration does not depend on some conditional if it is used unconditionally.
Additional information: link
Reentrancy in PinscherCoin.constructor() (#501-533):
External calls:
- pair = IDEXFactory(router.factory()).createPair(WBNB,address(this)) (#504)
State variables written after the call(s):
- _allowances[address(this)][address(router)] = uint256(- 1) (#505)
- _balances[msg.sender] = _totalSupply (#531)
- autoLiquidityReceiver = DEAD (#528)
- distributor = new DividendDistributor(address(router)) (#507)
- isDividendExempt[pair] = true (#523)
- isDividendExempt[address(this)] = true (#524)
- isDividendExempt[DEAD] = true (#525)
- isFeeExempt[msg.sender] = true (#509)
- isTimelockExempt[msg.sender] = true (#514)
- isTimelockExempt[DEAD] = true (#515)
- isTimelockExempt[address(this)] = true (#516)
- isTxLimitExempt[msg.sender] = true (#510)
- isTxLimitExempt[DEAD] = true (#511)
- marketingFeeReceiver = msg.sender (#529)
Reentrancy in DividendDistributor.deposit() (#335-353):
External calls:
- router.swapExactETHForTokensSupportingFeeOnTransferTokens{value: msg.value}(0,path,address(this),block.timestamp) (#342-347)
State variables written after the call(s):
- dividendsPerShare = dividendsPerShare.add(dividendsPerShareAccuracyFactor.mul(amount).div(totalShares)) (#352)
- totalDividends = totalDividends.add(amount) (#351)
Reentrancy in DividendDistributor.distributeDividend(address) (#386-397):
External calls:
- REWARD.transfer(shareholder,amount) (#392)
State variables written after the call(s):
- shareholderClaims[shareholder] = block.timestamp (#393)
Reentrancy in DividendDistributor.setShare(address,uint256) (#319-333):
External calls:
- distributeDividend(shareholder) (#321)
- REWARD.transfer(shareholder,amount) (#392)
State variables written after the call(s):
- addShareholder(shareholder) (#325)
- shareholderIndexes[shareholder] = shareholders.length (#419)
- removeShareholder(shareholder) (#327)
- shareholderIndexes[shareholders[shareholders.length - 1]] = shareholderIndexes[shareholder] (#425)
- addShareholder(shareholder) (#325)
- shareholders.push(shareholder) (#420)
- removeShareholder(shareholder) (#327)
- shareholders[shareholderIndexes[shareholder]] = shareholders[shareholders.length - 1] (#424)
- shareholders.pop() (#426)
- totalShares = totalShares.sub(shares[shareholder].amount).add(amount) (#330)
Apply the check-effects-interactions pattern.
Additional information: link
Reentrancy in PinscherCoin._transferFrom(address,address,uint256) (#579-630):
External calls:
- swapBack() (#608)
- router.swapExactTokensForETHSupportingFeeOnTransferTokens(amountToSwap,0,path,address(this),block.timestamp) (#709-715)
- distributor.deposit{value: amountBNBReflection}() (#723)
- (tmpSuccess) = address(marketingFeeReceiver).call{gas: 30000,value: amountBNBMarketing}() (#726)
- (tmpBuybackSuccess) = address(buyBackFeeReceiver).call{gas: 30000,value: amountBNBBuyback}() (#730)
- router.addLiquidityETH{value: amountBNBLiquidity}(address(this),amountToLiquify,0,0,autoLiquidityReceiver,block.timestamp) (#734-741)
- router.swapExactTokensForETHSupportingFeeOnTransferTokens(balanceOf(address(this)),0,path,address(this),block.timestamp) (#745-751)
- (tmpSuccess) = address(marketingFeeReceiver).call{gas: 30000,value: amountBNB}() (#753)
- distributor.setShare(sender,_balances[sender]) (#618)
- distributor.setShare(recipient,_balances[recipient]) (#622)
- distributor.process(distributorGas) (#625)
External calls sending eth:
- swapBack() (#608)
- distributor.deposit{value: amountBNBReflection}() (#723)
- (tmpSuccess) = address(marketingFeeReceiver).call{gas: 30000,value: amountBNBMarketing}() (#726)
- (tmpBuybackSuccess) = address(buyBackFeeReceiver).call{gas: 30000,value: amountBNBBuyback}() (#730)
- router.addLiquidityETH{value: amountBNBLiquidity}(address(this),amountToLiquify,0,0,autoLiquidityReceiver,block.timestamp) (#734-741)
- (tmpSuccess) = address(marketingFeeReceiver).call{gas: 30000,value: amountBNB}() (#753)
Event emitted after the call(s):
- Transfer(sender,recipient,amountReceived) (#627)
Reentrancy in PinscherCoin._transferFrom(address,address,uint256) (#579-630):
External calls:
- swapBack() (#608)
- router.swapExactTokensForETHSupportingFeeOnTransferTokens(amountToSwap,0,path,address(this),block.timestamp) (#709-715)
- distributor.deposit{value: amountBNBReflection}() (#723)
- (tmpSuccess) = address(marketingFeeReceiver).call{gas: 30000,value: amountBNBMarketing}() (#726)
- (tmpBuybackSuccess) = address(buyBackFeeReceiver).call{gas: 30000,value: amountBNBBuyback}() (#730)
- router.addLiquidityETH{value: amountBNBLiquidity}(address(this),amountToLiquify,0,0,autoLiquidityReceiver,block.timestamp) (#734-741)
- router.swapExactTokensForETHSupportingFeeOnTransferTokens(balanceOf(address(this)),0,path,address(this),block.timestamp) (#745-751)
- (tmpSuccess) = address(marketingFeeReceiver).call{gas: 30000,value: amountBNB}() (#753)
External calls sending eth:
- swapBack() (#608)
- distributor.deposit{value: amountBNBReflection}() (#723)
- (tmpSuccess) = address(marketingFeeReceiver).call{gas: 30000,value: amountBNBMarketing}() (#726)
- (tmpBuybackSuccess) = address(buyBackFeeReceiver).call{gas: 30000,value: amountBNBBuyback}() (#730)
- router.addLiquidityETH{value: amountBNBLiquidity}(address(this),amountToLiquify,0,0,autoLiquidityReceiver,block.timestamp) (#734-741)
- (tmpSuccess) = address(marketingFeeReceiver).call{gas: 30000,value: amountBNB}() (#753)
Event emitted after the call(s):
- Transfer(sender,address(this),feeAmount) (#655)
- amountReceived = takeFee(sender,recipient,amount) (#613)
- Transfer(sender,address(this),feeAmount) (#659)
- amountReceived = takeFee(sender,recipient,amount) (#613)
Reentrancy in PinscherCoin.constructor() (#501-533):
External calls:
- pair = IDEXFactory(router.factory()).createPair(WBNB,address(this)) (#504)
Event emitted after the call(s):
- Transfer(address(0),msg.sender,_totalSupply) (#532)
Reentrancy in PinscherCoin.recoverWrongTokens(address,uint256) (#676-680):
External calls:
- IBEP20(_tokenAddress).transfer(address(msg.sender),_tokenAmount) (#678)
Event emitted after the call(s):
- AdminTokenRecovery(_tokenAddress,_tokenAmount) (#679)
Reentrancy in PinscherCoin.swapBack() (#693-756):
External calls:
- router.swapExactTokensForETHSupportingFeeOnTransferTokens(amountToSwap,0,path,address(this),block.timestamp) (#709-715)
- distributor.deposit{value: amountBNBReflection}() (#723)
- (tmpSuccess) = address(marketingFeeReceiver).call{gas: 30000,value: amountBNBMarketing}() (#726)
- (tmpBuybackSuccess) = address(buyBackFeeReceiver).call{gas: 30000,value: amountBNBBuyback}() (#730)
- router.addLiquidityETH{value: amountBNBLiquidity}(address(this),amountToLiquify,0,0,autoLiquidityReceiver,block.timestamp) (#734-741)
External calls sending eth:
- distributor.deposit{value: amountBNBReflection}() (#723)
- (tmpSuccess) = address(marketingFeeReceiver).call{gas: 30000,value: amountBNBMarketing}() (#726)
- (tmpBuybackSuccess) = address(buyBackFeeReceiver).call{gas: 30000,value: amountBNBBuyback}() (#730)
- router.addLiquidityETH{value: amountBNBLiquidity}(address(this),amountToLiquify,0,0,autoLiquidityReceiver,block.timestamp) (#734-741)
Event emitted after the call(s):
- AutoLiquify(amountBNBLiquidity,amountToLiquify) (#742)
Apply the check-effects-interactions pattern.
Additional information: link
DividendDistributor.shouldDistribute(address) (#381-384) uses timestamp for comparisons
Dangerous comparisons:
- shareholderClaims[shareholder] + minPeriod < block.timestamp && getUnpaidEarnings(shareholder) > minDistribution (#382-383)
PinscherCoin._transferFrom(address,address,uint256) (#579-630) uses timestamp for comparisons
Dangerous comparisons:
- require(bool,string)(cooldownTimer[recipient] < block.timestamp,Please wait for cooldown between buys) (#602)
Avoid relying on block.timestamp.
Additional information: link
DividendDistributor.process(uint256) (#355-379) has costly operations inside a loop:
- currentIndex = 0 (#367)
DividendDistributor.distributeDividend(address) (#386-397) has costly operations inside a loop:
- totalDistributed = totalDistributed.add(amount) (#391)
DividendDistributor.process(uint256) (#355-379) has costly operations inside a loop:
- currentIndex ++ (#376)
Use a local variable to hold the loop computation result.
Additional information: link
PinscherCoin._maxTxAmount (#447) is set pre-construction with a non-constant function or state variable:
- (_totalSupply * 100) / 100
PinscherCoin._maxWalletToken (#450) is set pre-construction with a non-constant function or state variable:
- (_totalSupply * 100) / 100
PinscherCoin.buyBackFeeReceiver (#473) is set pre-construction with a non-constant function or state variable:
- BUYBACK
PinscherCoin.autoLiquidityReceiver (#474) is set pre-construction with a non-constant function or state variable:
- DEAD
PinscherCoin.marketingFeeReceiver (#475) is set pre-construction with a non-constant function or state variable:
- MKT
PinscherCoin.swapThreshold (#497) is set pre-construction with a non-constant function or state variable:
- _totalSupply * 10 / 10000
Remove any initialization of state variables via non-constant state variables or function calls. If variables must be set upon contract deployment, locate initialization in the constructor instead.
Additional information: link
Pragma version^0.7.4 (#78) allows old versions
solc-0.7.4 is not recommended for deployment
Deploy with any of the following Solidity versions: 0.5.16 - 0.5.17, 0.6.11 - 0.6.12, 0.7.5 - 0.7.6 Use a simple pragma version that allows any of these versions. Consider using the latest version of Solidity for testing.
Additional information: link
Low level call in PinscherCoin.swapBack() (#693-756):
- (tmpSuccess) = address(marketingFeeReceiver).call{gas: 30000,value: amountBNBMarketing}() (#726)
- (tmpBuybackSuccess) = address(buyBackFeeReceiver).call{gas: 30000,value: amountBNBBuyback}() (#730)
- (tmpSuccess) = address(marketingFeeReceiver).call{gas: 30000,value: amountBNB}() (#753)
Avoid low-level calls. Check the call success. If the call is meant for a contract, check for code existence
Additional information: link
Function IDEXRouter.WETH() (#209) is not in mixedCase
Parameter DividendDistributor.setDistributionCriteria(uint256,uint256)._minPeriod (#314) is not in mixedCase
Parameter DividendDistributor.setDistributionCriteria(uint256,uint256)._minDistribution (#314) is not in mixedCase
Variable DividendDistributor._token (#265) is not in mixedCase
Variable DividendDistributor.REWARD (#273) is not in mixedCase
Variable DividendDistributor.WBNB (#274) is not in mixedCase
Parameter PinscherCoin.recoverWrongTokens(address,uint256)._tokenAddress (#676) is not in mixedCase
Parameter PinscherCoin.recoverWrongTokens(address,uint256)._tokenAmount (#676) is not in mixedCase
Parameter PinscherCoin.tradingStatus(bool)._status (#683) is not in mixedCase
Parameter PinscherCoin.cooldownEnabled(bool,uint8)._status (#688) is not in mixedCase
Parameter PinscherCoin.cooldownEnabled(bool,uint8)._interval (#688) is not in mixedCase
Parameter PinscherCoin.setTransferTaxRate(uint256)._transferTaxRate (#790) is not in mixedCase
Parameter PinscherCoin.setRewardToken(address)._rewardToken (#794) is not in mixedCase
Parameter PinscherCoin.setFeeDistribution(uint256,uint256,uint256,uint256,uint256,uint256)._liquidityFee (#798) is not in mixedCase
Parameter PinscherCoin.setFeeDistribution(uint256,uint256,uint256,uint256,uint256,uint256)._reflectionFee (#798) is not in mixedCase
Parameter PinscherCoin.setFeeDistribution(uint256,uint256,uint256,uint256,uint256,uint256)._buyBackFee (#798) is not in mixedCase
Parameter PinscherCoin.setFeeDistribution(uint256,uint256,uint256,uint256,uint256,uint256)._marketingFee (#798) is not in mixedCase
Parameter PinscherCoin.setFeeDistribution(uint256,uint256,uint256,uint256,uint256,uint256)._burnFee (#798) is not in mixedCase
Parameter PinscherCoin.setFeeDistribution(uint256,uint256,uint256,uint256,uint256,uint256)._feeDenominator (#798) is not in mixedCase
Parameter PinscherCoin.setFeeReceivers(address,address,address)._autoLiquidityReceiver (#809) is not in mixedCase
Parameter PinscherCoin.setFeeReceivers(address,address,address)._marketingFeeReceiver (#809) is not in mixedCase
Parameter PinscherCoin.setFeeReceivers(address,address,address)._buyBackFeeReceiver (#809) is not in mixedCase
Parameter PinscherCoin.setSwapBackSettings(bool,uint256)._enabled (#815) is not in mixedCase
Parameter PinscherCoin.setSwapBackSettings(bool,uint256)._amount (#815) is not in mixedCase
Parameter PinscherCoin.setTargetLiquidity(uint256,uint256)._target (#820) is not in mixedCase
Parameter PinscherCoin.setTargetLiquidity(uint256,uint256)._denominator (#820) is not in mixedCase
Parameter PinscherCoin.setDistributionCriteria(uint256,uint256)._minPeriod (#825) is not in mixedCase
Parameter PinscherCoin.setDistributionCriteria(uint256,uint256)._minDistribution (#825) is not in mixedCase
Variable PinscherCoin.REWARD (#433) is not in mixedCase
Variable PinscherCoin.WBNB (#434) is not in mixedCase
Variable PinscherCoin.DEAD (#435) is not in mixedCase
Variable PinscherCoin.ZERO (#436) is not in mixedCase
Variable PinscherCoin.MKT (#437) is not in mixedCase
Variable PinscherCoin.BUYBACK (#438) is not in mixedCase
Constant PinscherCoin._name (#440) is not in UPPER_CASE_WITH_UNDERSCORES
Constant PinscherCoin._symbol (#441) is not in UPPER_CASE_WITH_UNDERSCORES
Constant PinscherCoin._decimals (#442) is not in UPPER_CASE_WITH_UNDERSCORES
Variable PinscherCoin._totalSupply (#444) is not in mixedCase
Variable PinscherCoin._maxTxAmount (#447) is not in mixedCase
Variable PinscherCoin._maxWalletToken (#450) is not in mixedCase
Variable PinscherCoin._balances (#452) is not in mixedCase
Variable PinscherCoin._allowances (#453) is not in mixedCase
Variable PinscherCoin._isBlacklisted (#455) is not in mixedCase
Follow the Solidity naming convention.
Additional information: link
Variable IDEXRouter.addLiquidity(address,address,uint256,uint256,uint256,uint256,address,uint256).amountADesired (#214) is too similar to IDEXRouter.addLiquidity(address,address,uint256,uint256,uint256,uint256,address,uint256).amountBDesired (#215)
Prevent variables from having similar names.
Additional information: link
PinscherCoin.slitherConstructorVariables() (#430-880) uses literals with too many digits:
- DEAD = 0x000000000000000000000000000000000000dEaD (#435)
PinscherCoin.slitherConstructorVariables() (#430-880) uses literals with too many digits:
- ZERO = 0x0000000000000000000000000000000000000000 (#436)
PinscherCoin.slitherConstructorVariables() (#430-880) uses literals with too many digits:
- _totalSupply = 200000000000000000000000 (#444)
PinscherCoin.slitherConstructorVariables() (#430-880) uses literals with too many digits:
- distributorGas = 500000 (#489)
Use: Ether suffix, Time suffix, or The scientific notation
Additional information: link
DividendDistributor.WBNB (#274) should be constant
DividendDistributor.dividendsPerShareAccuracyFactor (#287) should be constant
PinscherCoin.BUYBACK (#438) should be constant
PinscherCoin.DEAD (#435) should be constant
PinscherCoin.MKT (#437) should be constant
PinscherCoin.WBNB (#434) should be constant
PinscherCoin.ZERO (#436) should be constant
PinscherCoin._totalSupply (#444) should be constant
PinscherCoin.launchedAt (#483) should be constant
Add the constant attributes to state variables that never change.
Additional information: link
authorize(address) should be declared external:
- Auth.authorize(address) (#166-168)
unauthorize(address) should be declared external:
- Auth.unauthorize(address) (#173-175)
transferOwnership(address) should be declared external:
- Auth.transferOwnership(address) (#194-198)
tradingStatus(bool) should be declared external:
- PinscherCoin.tradingStatus(bool) (#683-685)
cooldownEnabled(bool,uint8) should be declared external:
- PinscherCoin.cooldownEnabled(bool,uint8) (#688-691)
burn(uint256) should be declared external:
- PinscherCoin.burn(uint256) (#771-776)
Use the external attribute for functions never called from the contract.
Additional information: link
Unable to find website, listings and other project-related information
Young tokens have high risks of scam / price dump / death
Token has no active CoinGecko listing / rank
Token has no active CoinMarketCap listing / rank
Unable to find Telegram and Twitter accounts