YXC [Yuanxiao coin] Token

Unable to find manual contract audit (e.g. Certik, PeckShield, Solidity...)

Reentrancy in BEP20Token._transfer(address,address,uint256) (#1147-1181):
External calls:
- swapAndLiquify(contractTokenBalance) (#1173)
- uniswapV2Router.addLiquidityETH{value: ethAmount}(address(this),tokenAmount,0,0,address(this),block.timestamp) (#861-868)
- uniswapV2Router.swapExactTokensForETHSupportingFeeOnTransferTokens(tokenAmount,0,path,address(this),block.timestamp) (#1216-1222)
- uniswapV2Router.swapExactTokensForTokensSupportingFeeOnTransferTokens(tokenAmount,0,path,address(this),block.timestamp) (#1234-1240)
- IERC20(BUSDToken).transfer(address(devAddress),dividends) (#1242)
External calls sending eth:
- swapAndLiquify(contractTokenBalance) (#1173)
- uniswapV2Router.addLiquidityETH{value: ethAmount}(address(this),tokenAmount,0,0,address(this),block.timestamp) (#861-868)
State variables written after the call(s):
- _tokenTransfer(from,to,amount,takeFee) (#1180)
- _devFee = _previousDevFee (#1132)
- _devFee = 0 (#1125)
- _tokenTransfer(from,to,amount,takeFee) (#1180)
- _liquidityFee = _previousLiquidityFee (#1130)
- _liquidityFee = 0 (#1123)
- _tokenTransfer(from,to,amount,takeFee) (#1180)
- _rOwned[burnAddress] = _rOwned[burnAddress].add(rBurn) (#968)
- _rOwned[address(this)] = _rOwned[address(this)].add(rLiquidity) (#1086)
- _rOwned[devAddress] = _rOwned[devAddress].add(rDev) (#978)
- _rOwned[address(this)] = _rOwned[address(this)].add(rDev) (#980)
- _rOwned[sender] = _rOwned[sender].sub(rAmount) (#888)
- _rOwned[recipient] = _rOwned[recipient].add(rTransferAmount) (#889)
- _tokenTransfer(from,to,amount,takeFee) (#1180)
- _rTotal = _rTotal.sub(rFee) (#1031)
Apply the check-effects-interactions pattern.

Additional information: link

BEP20Token.swapTokensForDividendToken(uint256) (#1225-1244) ignores return value by IERC20(BUSDToken).transfer(address(devAddress),dividends) (#1242)
Use SafeERC20, or ensure that the transfer/transferFrom return value is checked.

Additional information: link

Combination 3: Reentrancy vulnerabilities + Unchecked transfer vulnerability. Usual for scams. May be justified by some complex mechanics (e.g. rebase, reflections). DYOR & manual audit are advised.

BEP20Token.swapAndLiquify(uint256) (#1183-1204) performs a multiplication on the result of a division:
-addHl = uint256(100).mul(_liquidityFee).div(_liquidityFee.add(lsDevFee)) (#1188)
-addNumber = contractTokenBalance.mul(addHl).div(100) (#1189)
Consider ordering multiplication before division.

Additional information: link

PancakeLibrary.getAmountsOut(address,uint256,address[]).i (#729) is a local variable never initialized
Initialize all the variables. If a variable is meant to be initialized to zero, explicitly set it to zero to improve code readability.

Additional information: link

BEP20Token.addLiquidity(uint256,uint256) (#856-869) ignores return value by uniswapV2Router.addLiquidityETH{value: ethAmount}(address(this),tokenAmount,0,0,address(this),block.timestamp) (#861-868)
Ensure that all the return values of the function calls are used.

Additional information: link

BEP20Token.allowance(address,address).owner (#852) shadows:
- Ownable.owner() (#398-400) (function)
BEP20Token._approve(address,address,uint256).owner (#1139) shadows:
- Ownable.owner() (#398-400) (function)
Rename the local variables that shadow another component.

Additional information: link

BEP20Token.setTaxFeePercent(uint256) (#993-995) should emit an event for:
- _taxFee = taxFee (#994)
BEP20Token.setLiquidityFeePercent(uint256) (#997-999) should emit an event for:
- _liquidityFee = liquidityFee (#998)
BEP20Token.setBurnFeePercent(uint256) (#1001-1003) should emit an event for:
- _burnFee = burnFee (#1002)
BEP20Token.setNumTokenPercent(uint256) (#1005-1007) should emit an event for:
- numTokensSellToAddToLiquidity = numToken (#1006)
BEP20Token.setDevFeePercent(uint256) (#1009-1011) should emit an event for:
- _devFee = devFee (#1010)
BEP20Token.setMaxTxPercent(uint256) (#1013-1015) should emit an event for:
- _maxTxAmount = maxTxPercent (#1014)
Emit an event for critical parameter changes.

Additional information: link

BEP20Token.constructor(address)._dev (#808) lacks a zero-check on :
- devAddress = _dev (#818)
Check that the address is not zero.

Additional information: link

Reentrancy in BEP20Token._transfer(address,address,uint256) (#1147-1181):
External calls:
- swapAndLiquify(contractTokenBalance) (#1173)
- uniswapV2Router.addLiquidityETH{value: ethAmount}(address(this),tokenAmount,0,0,address(this),block.timestamp) (#861-868)
- uniswapV2Router.swapExactTokensForETHSupportingFeeOnTransferTokens(tokenAmount,0,path,address(this),block.timestamp) (#1216-1222)
- uniswapV2Router.swapExactTokensForTokensSupportingFeeOnTransferTokens(tokenAmount,0,path,address(this),block.timestamp) (#1234-1240)
- IERC20(BUSDToken).transfer(address(devAddress),dividends) (#1242)
External calls sending eth:
- swapAndLiquify(contractTokenBalance) (#1173)
- uniswapV2Router.addLiquidityETH{value: ethAmount}(address(this),tokenAmount,0,0,address(this),block.timestamp) (#861-868)
State variables written after the call(s):
- _tokenTransfer(from,to,amount,takeFee) (#1180)
- _burnFee = _previousBurnFee (#1131)
- _burnFee = 0 (#1124)
- _tokenTransfer(from,to,amount,takeFee) (#1180)
- _previousBurnFee = _burnFee (#1119)
- _tokenTransfer(from,to,amount,takeFee) (#1180)
- _previousDevFee = _devFee (#1120)
- _tokenTransfer(from,to,amount,takeFee) (#1180)
- _previousLiquidityFee = _liquidityFee (#1118)
- _tokenTransfer(from,to,amount,takeFee) (#1180)
- _previousTaxFee = _taxFee (#1117)
- _tokenTransfer(from,to,amount,takeFee) (#1180)
- _tFeeTotal = _tFeeTotal.add(tFee) (#1032)
- _tokenTransfer(from,to,amount,takeFee) (#1180)
- _taxFee = _previousTaxFee (#1129)
- _taxFee = 0 (#1122)
Reentrancy in BEP20Token.constructor(address) (#808-825):
External calls:
- uniswapV2Pair = IUniswapV2Factory(_uniswapV2Router.factory()).createPair(address(this),_uniswapV2Router.WETH()) (#813-814)
State variables written after the call(s):
- _isExcludedFromFee[owner()] = true (#820)
- _isExcludedFromFee[burnAddress] = true (#821)
- _isExcludedFromFee[address(this)] = true (#822)
- devAddress = _dev (#818)
- uniswapV2Router = _uniswapV2Router (#817)
Reentrancy in BEP20Token.swapAndLiquify(uint256) (#1183-1204):
External calls:
- swapTokensForEth(half) (#1196)
- uniswapV2Router.swapExactTokensForETHSupportingFeeOnTransferTokens(tokenAmount,0,path,address(this),block.timestamp) (#1216-1222)
- addLiquidity(otherHalf,newBalance) (#1199)
- uniswapV2Router.addLiquidityETH{value: ethAmount}(address(this),tokenAmount,0,0,address(this),block.timestamp) (#861-868)
External calls sending eth:
- addLiquidity(otherHalf,newBalance) (#1199)
- uniswapV2Router.addLiquidityETH{value: ethAmount}(address(this),tokenAmount,0,0,address(this),block.timestamp) (#861-868)
State variables written after the call(s):
- addLiquidity(otherHalf,newBalance) (#1199)
- _allowances[owner][spender] = amount (#1143)
Reentrancy in BEP20Token.swapAndLiquify(uint256) (#1183-1204):
External calls:
- swapTokensForEth(half) (#1196)
- uniswapV2Router.swapExactTokensForETHSupportingFeeOnTransferTokens(tokenAmount,0,path,address(this),block.timestamp) (#1216-1222)
- addLiquidity(otherHalf,newBalance) (#1199)
- uniswapV2Router.addLiquidityETH{value: ethAmount}(address(this),tokenAmount,0,0,address(this),block.timestamp) (#861-868)
- swapTokensForDividendToken(devNumber) (#1201)
- uniswapV2Router.swapExactTokensForTokensSupportingFeeOnTransferTokens(tokenAmount,0,path,address(this),block.timestamp) (#1234-1240)
- IERC20(BUSDToken).transfer(address(devAddress),dividends) (#1242)
External calls sending eth:
- addLiquidity(otherHalf,newBalance) (#1199)
- uniswapV2Router.addLiquidityETH{value: ethAmount}(address(this),tokenAmount,0,0,address(this),block.timestamp) (#861-868)
State variables written after the call(s):
- swapTokensForDividendToken(devNumber) (#1201)
- _allowances[owner][spender] = amount (#1143)
Reentrancy in BEP20Token.transferFrom(address,address,uint256) (#903-907):
External calls:
- _transfer(sender,recipient,amount) (#904)
- uniswapV2Router.addLiquidityETH{value: ethAmount}(address(this),tokenAmount,0,0,address(this),block.timestamp) (#861-868)
- uniswapV2Router.swapExactTokensForETHSupportingFeeOnTransferTokens(tokenAmount,0,path,address(this),block.timestamp) (#1216-1222)
- uniswapV2Router.swapExactTokensForTokensSupportingFeeOnTransferTokens(tokenAmount,0,path,address(this),block.timestamp) (#1234-1240)
- IERC20(BUSDToken).transfer(address(devAddress),dividends) (#1242)
External calls sending eth:
- _transfer(sender,recipient,amount) (#904)
- uniswapV2Router.addLiquidityETH{value: ethAmount}(address(this),tokenAmount,0,0,address(this),block.timestamp) (#861-868)
State variables written after the call(s):
- _approve(sender,_msgSender(),_allowances[sender][_msgSender()].sub(amount,ERC20: transfer amount exceeds allowance)) (#905)
- _allowances[owner][spender] = amount (#1143)
Apply the check-effects-interactions pattern.

Additional information: link

Reentrancy in BEP20Token._transfer(address,address,uint256) (#1147-1181):
External calls:
- swapAndLiquify(contractTokenBalance) (#1173)
- uniswapV2Router.addLiquidityETH{value: ethAmount}(address(this),tokenAmount,0,0,address(this),block.timestamp) (#861-868)
- uniswapV2Router.swapExactTokensForETHSupportingFeeOnTransferTokens(tokenAmount,0,path,address(this),block.timestamp) (#1216-1222)
- uniswapV2Router.swapExactTokensForTokensSupportingFeeOnTransferTokens(tokenAmount,0,path,address(this),block.timestamp) (#1234-1240)
- IERC20(BUSDToken).transfer(address(devAddress),dividends) (#1242)
External calls sending eth:
- swapAndLiquify(contractTokenBalance) (#1173)
- uniswapV2Router.addLiquidityETH{value: ethAmount}(address(this),tokenAmount,0,0,address(this),block.timestamp) (#861-868)
Event emitted after the call(s):
- Transfer(sender,burnAddress,tBurn) (#970)
- _tokenTransfer(from,to,amount,takeFee) (#1180)
- Transfer(sender,recipient,tTransferAmount) (#895)
- _tokenTransfer(from,to,amount,takeFee) (#1180)
Reentrancy in BEP20Token.constructor(address) (#808-825):
External calls:
- uniswapV2Pair = IUniswapV2Factory(_uniswapV2Router.factory()).createPair(address(this),_uniswapV2Router.WETH()) (#813-814)
Event emitted after the call(s):
- Transfer(address(0),owner(),_tTotal) (#824)
Reentrancy in BEP20Token.swapAndLiquify(uint256) (#1183-1204):
External calls:
- swapTokensForEth(half) (#1196)
- uniswapV2Router.swapExactTokensForETHSupportingFeeOnTransferTokens(tokenAmount,0,path,address(this),block.timestamp) (#1216-1222)
- addLiquidity(otherHalf,newBalance) (#1199)
- uniswapV2Router.addLiquidityETH{value: ethAmount}(address(this),tokenAmount,0,0,address(this),block.timestamp) (#861-868)
External calls sending eth:
- addLiquidity(otherHalf,newBalance) (#1199)
- uniswapV2Router.addLiquidityETH{value: ethAmount}(address(this),tokenAmount,0,0,address(this),block.timestamp) (#861-868)
Event emitted after the call(s):
- Approval(owner,spender,amount) (#1144)
- addLiquidity(otherHalf,newBalance) (#1199)
Reentrancy in BEP20Token.swapAndLiquify(uint256) (#1183-1204):
External calls:
- swapTokensForEth(half) (#1196)
- uniswapV2Router.swapExactTokensForETHSupportingFeeOnTransferTokens(tokenAmount,0,path,address(this),block.timestamp) (#1216-1222)
- addLiquidity(otherHalf,newBalance) (#1199)
- uniswapV2Router.addLiquidityETH{value: ethAmount}(address(this),tokenAmount,0,0,address(this),block.timestamp) (#861-868)
- swapTokensForDividendToken(devNumber) (#1201)
- uniswapV2Router.swapExactTokensForTokensSupportingFeeOnTransferTokens(tokenAmount,0,path,address(this),block.timestamp) (#1234-1240)
- IERC20(BUSDToken).transfer(address(devAddress),dividends) (#1242)
External calls sending eth:
- addLiquidity(otherHalf,newBalance) (#1199)
- uniswapV2Router.addLiquidityETH{value: ethAmount}(address(this),tokenAmount,0,0,address(this),block.timestamp) (#861-868)
Event emitted after the call(s):
- Approval(owner,spender,amount) (#1144)
- swapTokensForDividendToken(devNumber) (#1201)
- SwapAndLiquify(half,newBalance,otherHalf) (#1203)
Reentrancy in BEP20Token.transferFrom(address,address,uint256) (#903-907):
External calls:
- _transfer(sender,recipient,amount) (#904)
- uniswapV2Router.addLiquidityETH{value: ethAmount}(address(this),tokenAmount,0,0,address(this),block.timestamp) (#861-868)
- uniswapV2Router.swapExactTokensForETHSupportingFeeOnTransferTokens(tokenAmount,0,path,address(this),block.timestamp) (#1216-1222)
- uniswapV2Router.swapExactTokensForTokensSupportingFeeOnTransferTokens(tokenAmount,0,path,address(this),block.timestamp) (#1234-1240)
- IERC20(BUSDToken).transfer(address(devAddress),dividends) (#1242)
External calls sending eth:
- _transfer(sender,recipient,amount) (#904)
- uniswapV2Router.addLiquidityETH{value: ethAmount}(address(this),tokenAmount,0,0,address(this),block.timestamp) (#861-868)
Event emitted after the call(s):
- Approval(owner,spender,amount) (#1144)
- _approve(sender,_msgSender(),_allowances[sender][_msgSender()].sub(amount,ERC20: transfer amount exceeds allowance)) (#905)
Apply the check-effects-interactions pattern.

Additional information: link

Ownable.unlock() (#445-450) uses timestamp for comparisons
Dangerous comparisons:
- require(bool,string)(now > _lockTime,Contract is locked until 7 days) (#447)
Avoid relying on block.timestamp.

Additional information: link

Address.isContract(address) (#250-259) uses assembly
- INLINE ASM (#257)
Address._functionCallWithValue(address,bytes,uint256,string) (#343-364) uses assembly
- INLINE ASM (#356-359)
Do not use evm assembly.

Additional information: link

BEP20Token._tokenTransfer(address,address,uint256,bool) (#872-884) compares to a boolean constant:
-require(bool,string)(_list[sender] != true,List Account) (#877)
BEP20Token._tokenTransfer(address,address,uint256,bool) (#872-884) compares to a boolean constant:
-require(bool,string)(_list[recipient] != true,List Account) (#878)
BEP20Token.isList(address) (#932-938) compares to a boolean constant:
-_list[account] == true (#933)
BEP20Token.changeListStatus() (#940-946) compares to a boolean constant:
-enableList == true (#941)
Remove the equality to the boolean constant.

Additional information: link

Different versions of Solidity is used:
- Version used: ['>=0.5.0', '^0.6.12']
- ^0.6.12 (#5)
- >=0.5.0 (#646)
- >=0.5.0 (#665)
Use one Solidity version.

Additional information: link

Address._functionCallWithValue(address,bytes,uint256,string) (#343-364) is never used and should be removed
Address.functionCall(address,bytes) (#303-305) is never used and should be removed
Address.functionCall(address,bytes,string) (#313-315) is never used and should be removed
Address.functionCallWithValue(address,bytes,uint256) (#328-330) is never used and should be removed
Address.functionCallWithValue(address,bytes,uint256,string) (#338-341) is never used and should be removed
Address.isContract(address) (#250-259) is never used and should be removed
Address.sendValue(address,uint256) (#277-283) is never used and should be removed
Context._msgData() (#222-225) is never used and should be removed
PancakeLibrary.getAmountIn(uint256,uint256,uint256) (#716-722) is never used and should be removed
PancakeLibrary.getAmountOut(uint256,uint256,uint256) (#706-713) is never used and should be removed
PancakeLibrary.getAmountsIn(address,uint256,address[]) (#736-744) is never used and should be removed
PancakeLibrary.getAmountsOut(address,uint256,address[]) (#725-733) is never used and should be removed
PancakeLibrary.getReserves(address,address,address) (#691-696) is never used and should be removed
PancakeLibrary.pairFor(address,address,address) (#680-688) is never used and should be removed
PancakeLibrary.quote(uint256,uint256,uint256) (#699-703) is never used and should be removed
PancakeLibrary.sortTokens(address,address) (#673-677) is never used and should be removed
SafeMath.mod(uint256,uint256) (#128-130) is never used and should be removed
SafeMath.mod(uint256,uint256,string) (#144-147) is never used and should be removed
Remove unused functions.

Additional information: link

BEP20Token._rTotal (#760) is set pre-construction with a non-constant function or state variable:
- (MAX - (MAX % _tTotal))
BEP20Token._previousTaxFee (#768) is set pre-construction with a non-constant function or state variable:
- _taxFee
BEP20Token._previousLiquidityFee (#771) is set pre-construction with a non-constant function or state variable:
- _liquidityFee
BEP20Token._previousBurnFee (#774) is set pre-construction with a non-constant function or state variable:
- _burnFee
BEP20Token._previousDevFee (#777) is set pre-construction with a non-constant function or state variable:
- _devFee
Remove any initialization of state variables via non-constant state variables or function calls. If variables must be set upon contract deployment, locate initialization in the constructor instead.

Additional information: link

Pragma version>=0.5.0 (#646) allows old versions
Pragma version>=0.5.0 (#665) allows old versions
Deploy with any of the following Solidity versions: 0.5.16 - 0.5.17, 0.6.11 - 0.6.12, 0.7.5 - 0.7.6 Use a simple pragma version that allows any of these versions. Consider using the latest version of Solidity for testing.

Additional information: link

Low level call in Address.sendValue(address,uint256) (#277-283):
- (success) = recipient.call{value: amount}() (#281)
Low level call in Address._functionCallWithValue(address,bytes,uint256,string) (#343-364):
- (success,returndata) = target.call{value: weiValue}(data) (#347)
Avoid low-level calls. Check the call success. If the call is meant for a contract, check for code existence

Additional information: link

Function IPancakeRouter01.WETH() (#457) is not in mixedCase
Function IPancakePair.DOMAIN_SEPARATOR() (#610) is not in mixedCase
Function IPancakePair.PERMIT_TYPEHASH() (#611) is not in mixedCase
Function IPancakePair.MINIMUM_LIQUIDITY() (#628) is not in mixedCase
Parameter BEP20Token.setSwapAndLiquifyEnabled(bool)._enabled (#1017) is not in mixedCase
Parameter BEP20Token.setSwapDevEnabled(bool)._enabled (#1022) is not in mixedCase
Parameter BEP20Token.calculateTaxFee(uint256)._amount (#1089) is not in mixedCase
Parameter BEP20Token.calculateLiquidityFee(uint256)._amount (#1095) is not in mixedCase
Parameter BEP20Token.calculateBurnFee(uint256)._amount (#1101) is not in mixedCase
Parameter BEP20Token.calculateDevFee(uint256)._amount (#1107) is not in mixedCase
Variable BEP20Token._taxFee (#767) is not in mixedCase
Variable BEP20Token._liquidityFee (#770) is not in mixedCase
Variable BEP20Token._burnFee (#773) is not in mixedCase
Variable BEP20Token._devFee (#776) is not in mixedCase
Variable BEP20Token.BUSDToken (#781) is not in mixedCase
Variable BEP20Token._maxTxAmount (#791) is not in mixedCase
Follow the Solidity naming convention.

Additional information: link

Redundant expression "this (#223)" inContext (#217-226)
Remove redundant statements if they congest code but offer no value.

Additional information: link

Variable IPancakeRouter01.addLiquidity(address,address,uint256,uint256,uint256,uint256,address,uint256).amountADesired (#462) is too similar to IPancakeRouter01.addLiquidity(address,address,uint256,uint256,uint256,uint256,address,uint256).amountBDesired (#463)
Variable BEP20Token._getValues(uint256).rTransferAmount (#1046) is too similar to BEP20Token._getTValues(uint256).tTransferAmount (#1055)
Variable BEP20Token._getRValues(BEP20Token.TData,uint256).rTransferAmount (#1066) is too similar to BEP20Token._getValues(uint256).tTransferAmount (#1044)
Variable BEP20Token._transferStandard(address,address,uint256).rTransferAmount (#887) is too similar to BEP20Token._getValues(uint256).tTransferAmount (#1044)
Variable BEP20Token._transferStandard(address,address,uint256).rTransferAmount (#887) is too similar to BEP20Token._getTValues(uint256).tTransferAmount (#1055)
Variable BEP20Token._getRValues(BEP20Token.TData,uint256).rTransferAmount (#1066) is too similar to BEP20Token._getTValues(uint256).tTransferAmount (#1055)
Variable BEP20Token._getValues(uint256).rTransferAmount (#1046) is too similar to BEP20Token._getValues(uint256).tTransferAmount (#1044)
Variable BEP20Token.reflectionFromToken(uint256,bool).rTransferAmount (#954) is too similar to BEP20Token._getValues(uint256).tTransferAmount (#1044)
Variable BEP20Token.reflectionFromToken(uint256,bool).rTransferAmount (#954) is too similar to BEP20Token._getTValues(uint256).tTransferAmount (#1055)
Variable BEP20Token._getValues(uint256).rTransferAmount (#1046) is too similar to BEP20Token._transferStandard(address,address,uint256).tTransferAmount (#887)
Variable BEP20Token.reflectionFromToken(uint256,bool).rTransferAmount (#954) is too similar to BEP20Token._transferStandard(address,address,uint256).tTransferAmount (#887)
Variable BEP20Token._getRValues(BEP20Token.TData,uint256).rTransferAmount (#1066) is too similar to BEP20Token._transferStandard(address,address,uint256).tTransferAmount (#887)
Variable BEP20Token._transferStandard(address,address,uint256).rTransferAmount (#887) is too similar to BEP20Token._transferStandard(address,address,uint256).tTransferAmount (#887)
Prevent variables from having similar names.

Additional information: link

BEP20Token.slitherConstructorVariables() (#747-1246) uses literals with too many digits:
- _tTotal = 1000000000000000 * 10 ** 18 (#759)
BEP20Token.slitherConstructorVariables() (#747-1246) uses literals with too many digits:
- burnAddress = address(0x000000000000000000000000000000000000dEaD) (#782)
BEP20Token.slitherConstructorVariables() (#747-1246) uses literals with too many digits:
- _maxTxAmount = 1000000000000000 * 10 ** 18 (#791)
BEP20Token.slitherConstructorVariables() (#747-1246) uses literals with too many digits:
- numTokensSellToAddToLiquidity = 10000000000000 * 10 ** 18 (#792)
Use: Ether suffix, Time suffix, or The scientific notation

Additional information: link

BEP20Token._tOwned (#752) is never used in BEP20Token (#747-1246)
Remove unused state variables.

Additional information: link

BEP20Token.BUSDToken (#781) should be constant
BEP20Token._decimals (#765) should be constant
BEP20Token._name (#763) should be constant
BEP20Token._symbol (#764) should be constant
BEP20Token._tTotal (#759) should be constant
BEP20Token.burnAddress (#782) should be constant
Add the constant attributes to state variables that never change.

Additional information: link

renounceOwnership() should be declared external:
- Ownable.renounceOwnership() (#417-420)
transferOwnership(address) should be declared external:
- Ownable.transferOwnership(address) (#426-430)
geUnlockTime() should be declared external:
- Ownable.geUnlockTime() (#432-434)
lock(uint256) should be declared external:
- Ownable.lock(uint256) (#437-442)
unlock() should be declared external:
- Ownable.unlock() (#445-450)
name() should be declared external:
- BEP20Token.name() (#827-829)
symbol() should be declared external:
- BEP20Token.symbol() (#831-833)
decimals() should be declared external:
- BEP20Token.decimals() (#835-837)
totalSupply() should be declared external:
- BEP20Token.totalSupply() (#839-841)
transfer(address,uint256) should be declared external:
- BEP20Token.transfer(address,uint256) (#847-850)
allowance(address,address) should be declared external:
- BEP20Token.allowance(address,address) (#852-854)
approve(address,uint256) should be declared external:
- BEP20Token.approve(address,uint256) (#898-901)
transferFrom(address,address,uint256) should be declared external:
- BEP20Token.transferFrom(address,address,uint256) (#903-907)
increaseAllowance(address,uint256) should be declared external:
- BEP20Token.increaseAllowance(address,uint256) (#909-912)
decreaseAllowance(address,uint256) should be declared external:
- BEP20Token.decreaseAllowance(address,uint256) (#914-917)
totalFees() should be declared external:
- BEP20Token.totalFees() (#920-922)
addList(address) should be declared external:
- BEP20Token.addList(address) (#924-926)
removeList(address) should be declared external:
- BEP20Token.removeList(address) (#928-930)
isList(address) should be declared external:
- BEP20Token.isList(address) (#932-938)
changeListStatus() should be declared external:
- BEP20Token.changeListStatus() (#940-946)
reflectionFromToken(uint256,bool) should be declared external:
- BEP20Token.reflectionFromToken(uint256,bool) (#948-957)
excludeFromFee(address) should be declared external:
- BEP20Token.excludeFromFee(address) (#985-987)
includeInFee(address) should be declared external:
- BEP20Token.includeInFee(address) (#989-991)
setSwapAndLiquifyEnabled(bool) should be declared external:
- BEP20Token.setSwapAndLiquifyEnabled(bool) (#1017-1020)
setSwapDevEnabled(bool) should be declared external:
- BEP20Token.setSwapDevEnabled(bool) (#1022-1024)
isExcludedFromFee(address) should be declared external:
- BEP20Token.isExcludedFromFee(address) (#1135-1137)
Use the external attribute for functions never called from the contract.

Additional information: link

Token seems to be untradeable: there is no PancakeSwap trading pair and no trading volumes. Ignore for presale.

Number of Binance Smart Chain (BSC) token holders is less than 100. Token is either dead or inactive. Ignore for presale.

BscScan page for the token does not contain additional info: website, socials, description, etc.

Additional information: link

Unable to find token/project description on the website or on BscScan, CoinMarketCap

Unable to find token contract audit

Unable to find audit link on the website

Unable to find whitepaper link on the website

Unable to find token on CoinGecko

Additional information: link

Unable to find token on CoinMarketCap

Additional information: link

Unable to find token on CoinHunt

Additional information: link

Unable to find code repository for the project

Young tokens have high risks of scam / price dump / death

Young tokens have high risks of scam / price dump / death

Token has no active CoinGecko listing / rank

Token has no active CoinMarketCap listing / rank