Unable to find manual contract audit (e.g. Certik, PeckShield, Solidity...)
TrusterEnergy.addLiquidity(uint256,uint256) (#1032-1045) sends eth to arbitrary user
Dangerous calls:
- uniswapV2Router.addLiquidityETH{value: ethAmount}(address(this),tokenAmount,0,0,owner(),block.timestamp) (#1037-1044)
Ensure that an arbitrary user cannot withdraw unauthorized funds.
Additional information: link
Reentrancy in TrusterEnergy._transfer(address,address,uint256) (#966-989):
External calls:
- swapAndLiquify(contractTokenBalance) (#984)
- uniswapV2Router.addLiquidityETH{value: ethAmount}(address(this),tokenAmount,0,0,owner(),block.timestamp) (#1037-1044)
- uniswapV2Router.swapExactTokensForETHSupportingFeeOnTransferTokens(tokenAmount,0,path,address(this),block.timestamp) (#1023-1029)
External calls sending eth:
- swapAndLiquify(contractTokenBalance) (#984)
- uniswapV2Router.addLiquidityETH{value: ethAmount}(address(this),tokenAmount,0,0,owner(),block.timestamp) (#1037-1044)
State variables written after the call(s):
- _tokenTransfer(from,to,amount) (#988)
- _rOwned[address(this)] = _rOwned[address(this)].add(rLiquidity) (#919)
- _rOwned[sender] = _rOwned[sender].sub(rAmount) (#1086)
- _rOwned[sender] = _rOwned[sender].sub(rAmount) (#1095)
- _rOwned[sender] = _rOwned[sender].sub(rAmount) (#1106)
- _rOwned[sender] = _rOwned[sender].sub(rAmount) (#862)
- _rOwned[recipient] = _rOwned[recipient].add(rTransferAmount) (#1087)
- _rOwned[recipient] = _rOwned[recipient].add(rTransferAmount) (#1097)
- _rOwned[recipient] = _rOwned[recipient].add(rTransferAmount) (#1107)
- _rOwned[recipient] = _rOwned[recipient].add(rTransferAmount) (#864)
- _tokenTransfer(from,to,amount) (#988)
- _rTotal = _rTotal.sub(rFee) (#874)
- _tokenTransfer(from,to,amount) (#988)
- _tOwned[address(this)] = _tOwned[address(this)].add(tLiquidity) (#921)
- _tOwned[sender] = _tOwned[sender].sub(tAmount) (#861)
- _tOwned[sender] = _tOwned[sender].sub(tAmount) (#1105)
- _tOwned[recipient] = _tOwned[recipient].add(tTransferAmount) (#1096)
- _tOwned[recipient] = _tOwned[recipient].add(tTransferAmount) (#863)
Apply the check-effects-interactions pattern.
Additional information: link
TrusterEnergy.recoverToken(address,uint256) (#1165-1167) ignores return value by IERC20(_tokenAddress).transfer(owner(),_tokenAmount) (#1166)
Use SafeERC20, or ensure that the transfer/transferFrom return value is checked.
Additional information: link
Combination 1: Reentrancy vulnerabilities + Functions that send Ether to arbitraty destination. Usual for scams. May be justified by some complex mechanics (e.g. rebase, reflections). DYOR & manual audit are advised.
Combination 2: Unchecked transfer + Functions that send Ether to arbitraty destination. Usual for scams. May be justified by some complex mechanics (e.g. rebase, reflections). DYOR & manual audit are advised.
Combination 3: Reentrancy vulnerabilities + Unchecked transfer vulnerability. Usual for scams. May be justified by some complex mechanics (e.g. rebase, reflections). DYOR & manual audit are advised.
TrusterEnergy.includeInReward(address) (#846-857) has costly operations inside a loop:
- _excluded.pop() (#853)
Use a local variable to hold the loop computation result.
Additional information: link
TrusterEnergy.addLiquidity(uint256,uint256) (#1032-1045) ignores return value by uniswapV2Router.addLiquidityETH{value: ethAmount}(address(this),tokenAmount,0,0,owner(),block.timestamp) (#1037-1044)
Ensure that all the return values of the function calls are used.
Additional information: link
TrusterEnergy.allowance(address,address).owner (#777) shadows:
- Ownable.owner() (#422-424) (function)
TrusterEnergy._approve(address,address,uint256).owner (#958) shadows:
- Ownable.owner() (#422-424) (function)
Rename the local variables that shadow another component.
Additional information: link
TrusterEnergy.setTaxFeePercent(uint256) (#1136-1138) should emit an event for:
- _taxFee = taxFee (#1137)
TrusterEnergy.setLiquidityFeePercent(uint256) (#1140-1142) should emit an event for:
- _liquidityFee = liquidityFee (#1141)
TrusterEnergy.setInfraFeeFeePercent(uint256) (#1144-1146) should emit an event for:
- _infraFee = infraFee (#1145)
Emit an event for critical parameter changes.
Additional information: link
TrusterEnergy.setInfraWallet(address).newWallet (#1132) lacks a zero-check on :
- infraWallet = newWallet (#1133)
Check that the address is not zero.
Additional information: link
Reentrancy in TrusterEnergy._transfer(address,address,uint256) (#966-989):
External calls:
- swapAndLiquify(contractTokenBalance) (#984)
- uniswapV2Router.addLiquidityETH{value: ethAmount}(address(this),tokenAmount,0,0,owner(),block.timestamp) (#1037-1044)
- uniswapV2Router.swapExactTokensForETHSupportingFeeOnTransferTokens(tokenAmount,0,path,address(this),block.timestamp) (#1023-1029)
External calls sending eth:
- swapAndLiquify(contractTokenBalance) (#984)
- uniswapV2Router.addLiquidityETH{value: ethAmount}(address(this),tokenAmount,0,0,owner(),block.timestamp) (#1037-1044)
State variables written after the call(s):
- _tokenTransfer(from,to,amount) (#988)
- _infraFee = _previousInfraFee (#951)
- _infraFee = 0 (#945)
- _tokenTransfer(from,to,amount) (#988)
- _liquidityFee = _previousLiquidityFee (#950)
- _liquidityFee = 0 (#944)
- _liquidityFee = 0 (#1071)
- _liquidityFee = _previousLiquidityFee (#1077)
- _tokenTransfer(from,to,amount) (#988)
- _previousInfraFee = _infraFee (#941)
- _tokenTransfer(from,to,amount) (#988)
- _previousLiquidityFee = _liquidityFee (#940)
- _tokenTransfer(from,to,amount) (#988)
- _previousTaxFee = _taxFee (#939)
- _tokenTransfer(from,to,amount) (#988)
- _tFeeTotal = _tFeeTotal.add(tFee) (#875)
- _tokenTransfer(from,to,amount) (#988)
- _taxFee = _previousTaxFee (#949)
- _taxFee = 0 (#943)
- _taxFee = 0 (#1070)
- _taxFee = _previousTaxFee (#1076)
Reentrancy in TrusterEnergy.constructor() (#732-749):
External calls:
- uniswapV2Pair = IUniswapV2Factory(_uniswapV2Router.factory()).createPair(address(this),_uniswapV2Router.WETH()) (#738-739)
State variables written after the call(s):
- _isExcludedFromFee[owner()] = true (#745)
- _isExcludedFromFee[address(this)] = true (#746)
- uniswapV2Router = _uniswapV2Router (#742)
Reentrancy in TrusterEnergy.setRouterAddress(address) (#1148-1152):
External calls:
- uniswapV2Pair = IUniswapV2Factory(_newPancakeRouter.factory()).createPair(address(this),_newPancakeRouter.WETH()) (#1150)
State variables written after the call(s):
- uniswapV2Router = _newPancakeRouter (#1151)
Reentrancy in TrusterEnergy.swapAndLiquify(uint256) (#991-1012):
External calls:
- swapTokensForEth(half) (#1003)
- uniswapV2Router.swapExactTokensForETHSupportingFeeOnTransferTokens(tokenAmount,0,path,address(this),block.timestamp) (#1023-1029)
- addLiquidity(otherHalf,newBalance) (#1009)
- uniswapV2Router.addLiquidityETH{value: ethAmount}(address(this),tokenAmount,0,0,owner(),block.timestamp) (#1037-1044)
External calls sending eth:
- addLiquidity(otherHalf,newBalance) (#1009)
- uniswapV2Router.addLiquidityETH{value: ethAmount}(address(this),tokenAmount,0,0,owner(),block.timestamp) (#1037-1044)
State variables written after the call(s):
- addLiquidity(otherHalf,newBalance) (#1009)
- _allowances[owner][spender] = amount (#962)
Reentrancy in TrusterEnergy.transferFrom(address,address,uint256) (#786-790):
External calls:
- _transfer(sender,recipient,amount) (#787)
- uniswapV2Router.addLiquidityETH{value: ethAmount}(address(this),tokenAmount,0,0,owner(),block.timestamp) (#1037-1044)
- uniswapV2Router.swapExactTokensForETHSupportingFeeOnTransferTokens(tokenAmount,0,path,address(this),block.timestamp) (#1023-1029)
External calls sending eth:
- _transfer(sender,recipient,amount) (#787)
- uniswapV2Router.addLiquidityETH{value: ethAmount}(address(this),tokenAmount,0,0,owner(),block.timestamp) (#1037-1044)
State variables written after the call(s):
- _approve(sender,_msgSender(),_allowances[sender][_msgSender()].sub(amount,ERC20: transfer amount exceeds allowance)) (#788)
- _allowances[owner][spender] = amount (#962)
Apply the check-effects-interactions pattern.
Additional information: link
Reentrancy in TrusterEnergy._transfer(address,address,uint256) (#966-989):
External calls:
- swapAndLiquify(contractTokenBalance) (#984)
- uniswapV2Router.addLiquidityETH{value: ethAmount}(address(this),tokenAmount,0,0,owner(),block.timestamp) (#1037-1044)
- uniswapV2Router.swapExactTokensForETHSupportingFeeOnTransferTokens(tokenAmount,0,path,address(this),block.timestamp) (#1023-1029)
External calls sending eth:
- swapAndLiquify(contractTokenBalance) (#984)
- uniswapV2Router.addLiquidityETH{value: ethAmount}(address(this),tokenAmount,0,0,owner(),block.timestamp) (#1037-1044)
Event emitted after the call(s):
- Transfer(sender,recipient,tTransferAmount) (#1090)
- _tokenTransfer(from,to,amount) (#988)
- Transfer(sender,recipient,tTransferAmount) (#1110)
- _tokenTransfer(from,to,amount) (#988)
- Transfer(sender,recipient,tTransferAmount) (#1100)
- _tokenTransfer(from,to,amount) (#988)
- Transfer(sender,recipient,tTransferAmount) (#867)
- _tokenTransfer(from,to,amount) (#988)
Reentrancy in TrusterEnergy.constructor() (#732-749):
External calls:
- uniswapV2Pair = IUniswapV2Factory(_uniswapV2Router.factory()).createPair(address(this),_uniswapV2Router.WETH()) (#738-739)
Event emitted after the call(s):
- Transfer(address(0),_msgSender(),_tTotal) (#748)
Reentrancy in TrusterEnergy.swapAndLiquify(uint256) (#991-1012):
External calls:
- swapTokensForEth(half) (#1003)
- uniswapV2Router.swapExactTokensForETHSupportingFeeOnTransferTokens(tokenAmount,0,path,address(this),block.timestamp) (#1023-1029)
- addLiquidity(otherHalf,newBalance) (#1009)
- uniswapV2Router.addLiquidityETH{value: ethAmount}(address(this),tokenAmount,0,0,owner(),block.timestamp) (#1037-1044)
External calls sending eth:
- addLiquidity(otherHalf,newBalance) (#1009)
- uniswapV2Router.addLiquidityETH{value: ethAmount}(address(this),tokenAmount,0,0,owner(),block.timestamp) (#1037-1044)
Event emitted after the call(s):
- Approval(owner,spender,amount) (#963)
- addLiquidity(otherHalf,newBalance) (#1009)
- SwapAndLiquify(half,newBalance,otherHalf) (#1011)
Reentrancy in TrusterEnergy.transferFrom(address,address,uint256) (#786-790):
External calls:
- _transfer(sender,recipient,amount) (#787)
- uniswapV2Router.addLiquidityETH{value: ethAmount}(address(this),tokenAmount,0,0,owner(),block.timestamp) (#1037-1044)
- uniswapV2Router.swapExactTokensForETHSupportingFeeOnTransferTokens(tokenAmount,0,path,address(this),block.timestamp) (#1023-1029)
External calls sending eth:
- _transfer(sender,recipient,amount) (#787)
- uniswapV2Router.addLiquidityETH{value: ethAmount}(address(this),tokenAmount,0,0,owner(),block.timestamp) (#1037-1044)
Event emitted after the call(s):
- Approval(owner,spender,amount) (#963)
- _approve(sender,_msgSender(),_allowances[sender][_msgSender()].sub(amount,ERC20: transfer amount exceeds allowance)) (#788)
Apply the check-effects-interactions pattern.
Additional information: link
Ownable.unlock() (#469-474) uses timestamp for comparisons
Dangerous comparisons:
- require(bool,string)(now > _lockTime,Contract is locked until 7 days) (#471)
Avoid relying on block.timestamp.
Additional information: link
Address.isContract(address) (#274-283) uses assembly
- INLINE ASM (#281)
Address._functionCallWithValue(address,bytes,uint256,string) (#367-388) uses assembly
- INLINE ASM (#380-383)
Do not use evm assembly.
Additional information: link
Address._functionCallWithValue(address,bytes,uint256,string) (#367-388) is never used and should be removed
Address.functionCall(address,bytes) (#327-329) is never used and should be removed
Address.functionCall(address,bytes,string) (#337-339) is never used and should be removed
Address.functionCallWithValue(address,bytes,uint256) (#352-354) is never used and should be removed
Address.functionCallWithValue(address,bytes,uint256,string) (#362-365) is never used and should be removed
Address.isContract(address) (#274-283) is never used and should be removed
Address.sendValue(address,uint256) (#301-307) is never used and should be removed
Context._msgData() (#247-250) is never used and should be removed
SafeMath.mod(uint256,uint256) (#220-222) is never used and should be removed
SafeMath.mod(uint256,uint256,string) (#236-239) is never used and should be removed
Remove unused functions.
Additional information: link
TrusterEnergy._rTotal (#694) is set pre-construction with a non-constant function or state variable:
- (MAX - (MAX % _tTotal))
TrusterEnergy._previousTaxFee (#702) is set pre-construction with a non-constant function or state variable:
- _taxFee
TrusterEnergy._previousLiquidityFee (#705) is set pre-construction with a non-constant function or state variable:
- _liquidityFee
TrusterEnergy._previousInfraFee (#709) is set pre-construction with a non-constant function or state variable:
- _infraFee
Remove any initialization of state variables via non-constant state variables or function calls. If variables must be set upon contract deployment, locate initialization in the constructor instead.
Additional information: link
Low level call in Address.sendValue(address,uint256) (#301-307):
- (success) = recipient.call{value: amount}() (#305)
Low level call in Address._functionCallWithValue(address,bytes,uint256,string) (#367-388):
- (success,returndata) = target.call{value: weiValue}(data) (#371)
Low level call in TrusterEnergy.recoverETH(uint256) (#1159-1163):
- (success) = owner().call{value: _amount}() (#1162)
Avoid low-level calls. Check the call success. If the call is meant for a contract, check for code existence
Additional information: link
Function IUniswapV2Pair.DOMAIN_SEPARATOR() (#510) is not in mixedCase
Function IUniswapV2Pair.PERMIT_TYPEHASH() (#511) is not in mixedCase
Function IUniswapV2Pair.MINIMUM_LIQUIDITY() (#526) is not in mixedCase
Function IUniswapV2Router01.WETH() (#545) is not in mixedCase
Parameter TrusterEnergy.calculateTaxFee(uint256)._amount (#924) is not in mixedCase
Parameter TrusterEnergy.calculateLiquidityFee(uint256)._amount (#930) is not in mixedCase
Parameter TrusterEnergy.setSwapAndLiquifyEnabled(bool)._enabled (#1154) is not in mixedCase
Parameter TrusterEnergy.recoverETH(uint256)._amount (#1159) is not in mixedCase
Parameter TrusterEnergy.recoverToken(address,uint256)._tokenAddress (#1165) is not in mixedCase
Parameter TrusterEnergy.recoverToken(address,uint256)._tokenAmount (#1165) is not in mixedCase
Variable TrusterEnergy._taxFee (#701) is not in mixedCase
Variable TrusterEnergy._liquidityFee (#704) is not in mixedCase
Variable TrusterEnergy._infraFee (#707) is not in mixedCase
Follow the Solidity naming convention.
Additional information: link
Redundant expression "this (#248)" inContext (#242-251)
Remove redundant statements if they congest code but offer no value.
Additional information: link
Variable IUniswapV2Router01.addLiquidity(address,address,uint256,uint256,uint256,uint256,address,uint256).amountADesired (#550) is too similar to IUniswapV2Router01.addLiquidity(address,address,uint256,uint256,uint256,uint256,address,uint256).amountBDesired (#551)
Variable TrusterEnergy._transferToExcluded(address,address,uint256).rTransferAmount (#1094) is too similar to TrusterEnergy._transferStandard(address,address,uint256).tTransferAmount (#1085)
Variable TrusterEnergy._getValues(uint256).rTransferAmount (#880) is too similar to TrusterEnergy._transferBothExcluded(address,address,uint256).tTransferAmount (#860)
Variable TrusterEnergy._getRValues(uint256,uint256,uint256,uint256).rTransferAmount (#895) is too similar to TrusterEnergy._getTValues(uint256).tTransferAmount (#887)
Variable TrusterEnergy._transferBothExcluded(address,address,uint256).rTransferAmount (#860) is too similar to TrusterEnergy._getValues(uint256).tTransferAmount (#879)
Variable TrusterEnergy._transferFromExcluded(address,address,uint256).rTransferAmount (#1104) is too similar to TrusterEnergy._transferStandard(address,address,uint256).tTransferAmount (#1085)
Variable TrusterEnergy.reflectionFromToken(uint256,bool).rTransferAmount (#825) is too similar to TrusterEnergy._getTValues(uint256).tTransferAmount (#887)
Variable TrusterEnergy._transferToExcluded(address,address,uint256).rTransferAmount (#1094) is too similar to TrusterEnergy._getTValues(uint256).tTransferAmount (#887)
Variable TrusterEnergy._transferToExcluded(address,address,uint256).rTransferAmount (#1094) is too similar to TrusterEnergy._transferToExcluded(address,address,uint256).tTransferAmount (#1094)
Variable TrusterEnergy._transferFromExcluded(address,address,uint256).rTransferAmount (#1104) is too similar to TrusterEnergy._getTValues(uint256).tTransferAmount (#887)
Variable TrusterEnergy._getValues(uint256).rTransferAmount (#880) is too similar to TrusterEnergy._getValues(uint256).tTransferAmount (#879)
Variable TrusterEnergy._transferToExcluded(address,address,uint256).rTransferAmount (#1094) is too similar to TrusterEnergy._transferBothExcluded(address,address,uint256).tTransferAmount (#860)
Variable TrusterEnergy._transferBothExcluded(address,address,uint256).rTransferAmount (#860) is too similar to TrusterEnergy._transferStandard(address,address,uint256).tTransferAmount (#1085)
Variable TrusterEnergy._transferToExcluded(address,address,uint256).rTransferAmount (#1094) is too similar to TrusterEnergy._transferFromExcluded(address,address,uint256).tTransferAmount (#1104)
Variable TrusterEnergy._transferStandard(address,address,uint256).rTransferAmount (#1085) is too similar to TrusterEnergy._transferStandard(address,address,uint256).tTransferAmount (#1085)
Variable TrusterEnergy._transferToExcluded(address,address,uint256).rTransferAmount (#1094) is too similar to TrusterEnergy._getValues(uint256).tTransferAmount (#879)
Variable TrusterEnergy._transferBothExcluded(address,address,uint256).rTransferAmount (#860) is too similar to TrusterEnergy._getTValues(uint256).tTransferAmount (#887)
Variable TrusterEnergy._getValues(uint256).rTransferAmount (#880) is too similar to TrusterEnergy._transferStandard(address,address,uint256).tTransferAmount (#1085)
Variable TrusterEnergy._transferBothExcluded(address,address,uint256).rTransferAmount (#860) is too similar to TrusterEnergy._transferBothExcluded(address,address,uint256).tTransferAmount (#860)
Variable TrusterEnergy._getRValues(uint256,uint256,uint256,uint256).rTransferAmount (#895) is too similar to TrusterEnergy._transferStandard(address,address,uint256).tTransferAmount (#1085)
Variable TrusterEnergy._getValues(uint256).rTransferAmount (#880) is too similar to TrusterEnergy._getTValues(uint256).tTransferAmount (#887)
Variable TrusterEnergy.reflectionFromToken(uint256,bool).rTransferAmount (#825) is too similar to TrusterEnergy._transferStandard(address,address,uint256).tTransferAmount (#1085)
Variable TrusterEnergy._transferFromExcluded(address,address,uint256).rTransferAmount (#1104) is too similar to TrusterEnergy._getValues(uint256).tTransferAmount (#879)
Variable TrusterEnergy._transferFromExcluded(address,address,uint256).rTransferAmount (#1104) is too similar to TrusterEnergy._transferBothExcluded(address,address,uint256).tTransferAmount (#860)
Variable TrusterEnergy._transferStandard(address,address,uint256).rTransferAmount (#1085) is too similar to TrusterEnergy._getTValues(uint256).tTransferAmount (#887)
Variable TrusterEnergy.reflectionFromToken(uint256,bool).rTransferAmount (#825) is too similar to TrusterEnergy._transferFromExcluded(address,address,uint256).tTransferAmount (#1104)
Variable TrusterEnergy._transferStandard(address,address,uint256).rTransferAmount (#1085) is too similar to TrusterEnergy._transferFromExcluded(address,address,uint256).tTransferAmount (#1104)
Variable TrusterEnergy._getRValues(uint256,uint256,uint256,uint256).rTransferAmount (#895) is too similar to TrusterEnergy._transferFromExcluded(address,address,uint256).tTransferAmount (#1104)
Variable TrusterEnergy.reflectionFromToken(uint256,bool).rTransferAmount (#825) is too similar to TrusterEnergy._transferToExcluded(address,address,uint256).tTransferAmount (#1094)
Variable TrusterEnergy._getRValues(uint256,uint256,uint256,uint256).rTransferAmount (#895) is too similar to TrusterEnergy._transferToExcluded(address,address,uint256).tTransferAmount (#1094)
Variable TrusterEnergy._transferStandard(address,address,uint256).rTransferAmount (#1085) is too similar to TrusterEnergy._transferToExcluded(address,address,uint256).tTransferAmount (#1094)
Variable TrusterEnergy._transferFromExcluded(address,address,uint256).rTransferAmount (#1104) is too similar to TrusterEnergy._transferFromExcluded(address,address,uint256).tTransferAmount (#1104)
Variable TrusterEnergy._transferBothExcluded(address,address,uint256).rTransferAmount (#860) is too similar to TrusterEnergy._transferFromExcluded(address,address,uint256).tTransferAmount (#1104)
Variable TrusterEnergy._transferFromExcluded(address,address,uint256).rTransferAmount (#1104) is too similar to TrusterEnergy._transferToExcluded(address,address,uint256).tTransferAmount (#1094)
Variable TrusterEnergy._transferBothExcluded(address,address,uint256).rTransferAmount (#860) is too similar to TrusterEnergy._transferToExcluded(address,address,uint256).tTransferAmount (#1094)
Variable TrusterEnergy.reflectionFromToken(uint256,bool).rTransferAmount (#825) is too similar to TrusterEnergy._transferBothExcluded(address,address,uint256).tTransferAmount (#860)
Variable TrusterEnergy.reflectionFromToken(uint256,bool).rTransferAmount (#825) is too similar to TrusterEnergy._getValues(uint256).tTransferAmount (#879)
Variable TrusterEnergy._transferStandard(address,address,uint256).rTransferAmount (#1085) is too similar to TrusterEnergy._transferBothExcluded(address,address,uint256).tTransferAmount (#860)
Variable TrusterEnergy._getRValues(uint256,uint256,uint256,uint256).rTransferAmount (#895) is too similar to TrusterEnergy._getValues(uint256).tTransferAmount (#879)
Variable TrusterEnergy._getRValues(uint256,uint256,uint256,uint256).rTransferAmount (#895) is too similar to TrusterEnergy._transferBothExcluded(address,address,uint256).tTransferAmount (#860)
Variable TrusterEnergy._transferStandard(address,address,uint256).rTransferAmount (#1085) is too similar to TrusterEnergy._getValues(uint256).tTransferAmount (#879)
Variable TrusterEnergy._getValues(uint256).rTransferAmount (#880) is too similar to TrusterEnergy._transferFromExcluded(address,address,uint256).tTransferAmount (#1104)
Variable TrusterEnergy._getValues(uint256).rTransferAmount (#880) is too similar to TrusterEnergy._transferToExcluded(address,address,uint256).tTransferAmount (#1094)
Prevent variables from having similar names.
Additional information: link
TrusterEnergy._decimals (#699) should be constant
TrusterEnergy._name (#697) should be constant
TrusterEnergy._symbol (#698) should be constant
TrusterEnergy._tTotal (#693) should be constant
TrusterEnergy.numTokensSellToAddToLiquidity (#718) should be constant
Add the constant attributes to state variables that never change.
Additional information: link
renounceOwnership() should be declared external:
- Ownable.renounceOwnership() (#441-444)
transferOwnership(address) should be declared external:
- Ownable.transferOwnership(address) (#450-454)
geUnlockTime() should be declared external:
- Ownable.geUnlockTime() (#456-458)
lock(uint256) should be declared external:
- Ownable.lock(uint256) (#461-466)
unlock() should be declared external:
- Ownable.unlock() (#469-474)
name() should be declared external:
- TrusterEnergy.name() (#751-753)
symbol() should be declared external:
- TrusterEnergy.symbol() (#755-757)
decimals() should be declared external:
- TrusterEnergy.decimals() (#759-761)
totalSupply() should be declared external:
- TrusterEnergy.totalSupply() (#763-765)
transfer(address,uint256) should be declared external:
- TrusterEnergy.transfer(address,uint256) (#772-775)
allowance(address,address) should be declared external:
- TrusterEnergy.allowance(address,address) (#777-779)
approve(address,uint256) should be declared external:
- TrusterEnergy.approve(address,uint256) (#781-784)
transferFrom(address,address,uint256) should be declared external:
- TrusterEnergy.transferFrom(address,address,uint256) (#786-790)
increaseAllowance(address,uint256) should be declared external:
- TrusterEnergy.increaseAllowance(address,uint256) (#792-795)
decreaseAllowance(address,uint256) should be declared external:
- TrusterEnergy.decreaseAllowance(address,uint256) (#797-800)
isExcludedFromReward(address) should be declared external:
- TrusterEnergy.isExcludedFromReward(address) (#802-804)
totalFees() should be declared external:
- TrusterEnergy.totalFees() (#806-808)
deliver(uint256) should be declared external:
- TrusterEnergy.deliver(uint256) (#810-817)
reflectionFromToken(uint256,bool) should be declared external:
- TrusterEnergy.reflectionFromToken(uint256,bool) (#819-828)
excludeFromReward(address) should be declared external:
- TrusterEnergy.excludeFromReward(address) (#836-844)
isExcludedFromFee(address) should be declared external:
- TrusterEnergy.isExcludedFromFee(address) (#954-956)
excludeFromFee(address) should be declared external:
- TrusterEnergy.excludeFromFee(address) (#1113-1115)
includeInFee(address) should be declared external:
- TrusterEnergy.includeInFee(address) (#1117-1119)
setRouterAddress(address) should be declared external:
- TrusterEnergy.setRouterAddress(address) (#1148-1152)
setSwapAndLiquifyEnabled(bool) should be declared external:
- TrusterEnergy.setSwapAndLiquifyEnabled(bool) (#1154-1157)
recoverETH(uint256) should be declared external:
- TrusterEnergy.recoverETH(uint256) (#1159-1163)
recoverToken(address,uint256) should be declared external:
- TrusterEnergy.recoverToken(address,uint256) (#1165-1167)
Use the external attribute for functions never called from the contract.
Additional information: link
Average PancakeSwap trading volume, liqudity, number of swaps are extremely low. Token seems to be dead.
Token is deployed only at one blockchain
Token has only one trading pair
Unable to find PancakeSwap trading pair to compute liquidity.
Unable to find PancakeSwap trading pair to compute volume.
Unable to find PancakeSwap trading pair to compute number of swaps.
Unable to find website, listings and other project-related information
Young tokens have high risks of price dump / death
Token has no active CoinGecko listing / rank
Token has no active CoinMarketCap listing / rank
Unable to find Telegram and Twitter accounts