Refugees Token Token Logo

$RFG [Refugees] Token

About $RFG

Listings

Token 12 months
CoinMarketCap 7 months
white paper

Launched in 06/06/2021 by a team based in Greece, Refugees Token is a charity project created to give Refugees the opportunity to send funds to their families through cryptocurrencies but also to give people the opportunity to help them through donations.

Additionally using the application which is currently in the stage of development each transaction will have 1% tax that will go directly to the charity.

Apart from the charity cause of the project, Refugees Token has been designed to be a deflationary token that rewards you with tokens simply for holding. Transactions have a 10% tax fee which is divided into 5% auto adding to liquidity and 5% distributed to holders and the burn address. Over 52% of the token's supply has been sent to the burn address from the beginning of the project

Social

Laser Scorebeta Last Audit: 19 February 2022

report
Token is either risky or in presale. For presale 30+ is a fine score.

Anti-Scam

Links


Unable to find manual contract audit (e.g. Certik, PeckShield, Solidity...)

CoinToken.addLiquidity(uint256,uint256) (#1089-1102) sends eth to arbitrary user
Dangerous calls:
- uniswapV2Router.addLiquidityETH{value: ethAmount}(address(this),tokenAmount,0,0,owner(),block.timestamp) (#1094-1101)
Ensure that an arbitrary user cannot withdraw unauthorized funds.

Additional information: link

Reentrancy in CoinToken._transfer(address,address,uint256) (#1002-1046):
External calls:
- swapAndLiquify(contractTokenBalance) (#1033)
- uniswapV2Router.addLiquidityETH{value: ethAmount}(address(this),tokenAmount,0,0,owner(),block.timestamp) (#1094-1101)
- uniswapV2Router.swapExactTokensForETHSupportingFeeOnTransferTokens(tokenAmount,0,path,address(this),block.timestamp) (#1080-1086)
External calls sending eth:
- swapAndLiquify(contractTokenBalance) (#1033)
- uniswapV2Router.addLiquidityETH{value: ethAmount}(address(this),tokenAmount,0,0,owner(),block.timestamp) (#1094-1101)
State variables written after the call(s):
- _tokenTransfer(from,to,amount,takeFee) (#1045)
- _rOwned[address(this)] = _rOwned[address(this)].add(rLiquidity) (#953)
- _rOwned[sender] = _rOwned[sender].sub(rAmount) (#1127)
- _rOwned[sender] = _rOwned[sender].sub(rAmount) (#1136)
- _rOwned[sender] = _rOwned[sender].sub(rAmount) (#867)
- _rOwned[sender] = _rOwned[sender].sub(rAmount) (#1147)
- _rOwned[recipient] = _rOwned[recipient].add(rTransferAmount) (#1128)
- _rOwned[recipient] = _rOwned[recipient].add(rTransferAmount) (#1138)
- _rOwned[recipient] = _rOwned[recipient].add(rTransferAmount) (#1148)
- _rOwned[recipient] = _rOwned[recipient].add(rTransferAmount) (#869)
- _tokenTransfer(from,to,amount,takeFee) (#1045)
- _rTotal = _rTotal.sub(rFee) (#908)
- _tokenTransfer(from,to,amount,takeFee) (#1045)
- _tOwned[address(this)] = _tOwned[address(this)].add(tLiquidity) (#955)
- _tOwned[sender] = _tOwned[sender].sub(tAmount) (#866)
- _tOwned[sender] = _tOwned[sender].sub(tAmount) (#1146)
- _tOwned[recipient] = _tOwned[recipient].add(tTransferAmount) (#1137)
- _tOwned[recipient] = _tOwned[recipient].add(tTransferAmount) (#868)
Apply the check-effects-interactions pattern.

Additional information: link


Combination 1: Reentrancy vulnerabilities + Functions that send Ether to arbitraty destination. Usual for scams. May be justified by some complex mechanics (e.g. rebase, reflections). DYOR & manual audit are advised.

Contract ticker ($RFG) contains non-alphanumeric characters.
Not a direct threat, but may indicate unreliable intentions of developer. Non-alphanumeric chars (,.;!#*&") are extremely rare among low risk tokens.

CoinToken.includeInReward(address) (#852-863) has costly operations inside a loop:
- _excluded.pop() (#859)
Use a local variable to hold the loop computation result.

Additional information: link

CoinToken.addLiquidity(uint256,uint256) (#1089-1102) ignores return value by uniswapV2Router.addLiquidityETH{value: ethAmount}(address(this),tokenAmount,0,0,owner(),block.timestamp) (#1094-1101)
Ensure that all the return values of the function calls are used.

Additional information: link

CoinToken.allowance(address,address).owner (#783) shadows:
- Ownable.owner() (#404-406) (function)
CoinToken._approve(address,address,uint256).owner (#994) shadows:
- Ownable.owner() (#404-406) (function)
Rename the local variables that shadow another component.

Additional information: link

CoinToken.setTaxFeePercent(uint256) (#883-885) should emit an event for:
- _taxFee = taxFee (#884)
CoinToken.setLiquidityFeePercent(uint256) (#887-889) should emit an event for:
- _liquidityFee = liquidityFee (#888)
CoinToken.setNumTokensSellToAddToLiquidity(uint256) (#891-893) should emit an event for:
- numTokensSellToAddToLiquidity = swapNumber * 10 ** _decimals (#892)
CoinToken.setMaxTxPercent(uint256) (#895-897) should emit an event for:
- _maxTxAmount = maxTxPercent * 10 ** _decimals (#896)
Emit an event for critical parameter changes.

Additional information: link

CoinToken.constructor(string,string,uint256,uint256,uint256,uint256,uint256,uint256,address,address).tokenOwner (#724) lacks a zero-check on :
- _owner = tokenOwner (#752)
Check that the address is not zero.

Additional information: link

Reentrancy in CoinToken._transfer(address,address,uint256) (#1002-1046):
External calls:
- swapAndLiquify(contractTokenBalance) (#1033)
- uniswapV2Router.addLiquidityETH{value: ethAmount}(address(this),tokenAmount,0,0,owner(),block.timestamp) (#1094-1101)
- uniswapV2Router.swapExactTokensForETHSupportingFeeOnTransferTokens(tokenAmount,0,path,address(this),block.timestamp) (#1080-1086)
External calls sending eth:
- swapAndLiquify(contractTokenBalance) (#1033)
- uniswapV2Router.addLiquidityETH{value: ethAmount}(address(this),tokenAmount,0,0,owner(),block.timestamp) (#1094-1101)
State variables written after the call(s):
- _tokenTransfer(from,to,amount,takeFee) (#1045)
- _liquidityFee = _previousLiquidityFee (#987)
- _liquidityFee = 0 (#982)
- _tokenTransfer(from,to,amount,takeFee) (#1045)
- _previousLiquidityFee = _liquidityFee (#979)
- _tokenTransfer(from,to,amount,takeFee) (#1045)
- _previousTaxFee = _taxFee (#978)
- _tokenTransfer(from,to,amount,takeFee) (#1045)
- _tFeeTotal = _tFeeTotal.add(tFee) (#909)
- _tokenTransfer(from,to,amount,takeFee) (#1045)
- _taxFee = _previousTaxFee (#986)
- _taxFee = 0 (#981)
Reentrancy in CoinToken.constructor(string,string,uint256,uint256,uint256,uint256,uint256,uint256,address,address) (#724-754):
External calls:
- uniswapV2Pair = IUniswapV2Factory(_uniswapV2Router.factory()).createPair(address(this),_uniswapV2Router.WETH()) (#742-743)
State variables written after the call(s):
- _isExcludedFromFee[tokenOwner] = true (#749)
- _isExcludedFromFee[address(this)] = true (#750)
- _owner = tokenOwner (#752)
- uniswapV2Router = _uniswapV2Router (#746)
Reentrancy in CoinToken.swapAndLiquify(uint256) (#1048-1069):
External calls:
- swapTokensForEth(half) (#1060)
- uniswapV2Router.swapExactTokensForETHSupportingFeeOnTransferTokens(tokenAmount,0,path,address(this),block.timestamp) (#1080-1086)
- addLiquidity(otherHalf,newBalance) (#1066)
- uniswapV2Router.addLiquidityETH{value: ethAmount}(address(this),tokenAmount,0,0,owner(),block.timestamp) (#1094-1101)
External calls sending eth:
- addLiquidity(otherHalf,newBalance) (#1066)
- uniswapV2Router.addLiquidityETH{value: ethAmount}(address(this),tokenAmount,0,0,owner(),block.timestamp) (#1094-1101)
State variables written after the call(s):
- addLiquidity(otherHalf,newBalance) (#1066)
- _allowances[owner][spender] = amount (#998)
Reentrancy in CoinToken.transferFrom(address,address,uint256) (#792-796):
External calls:
- _transfer(sender,recipient,amount) (#793)
- uniswapV2Router.addLiquidityETH{value: ethAmount}(address(this),tokenAmount,0,0,owner(),block.timestamp) (#1094-1101)
- uniswapV2Router.swapExactTokensForETHSupportingFeeOnTransferTokens(tokenAmount,0,path,address(this),block.timestamp) (#1080-1086)
External calls sending eth:
- _transfer(sender,recipient,amount) (#793)
- uniswapV2Router.addLiquidityETH{value: ethAmount}(address(this),tokenAmount,0,0,owner(),block.timestamp) (#1094-1101)
State variables written after the call(s):
- _approve(sender,_msgSender(),_allowances[sender][_msgSender()].sub(amount,ERC20: transfer amount exceeds allowance)) (#794)
- _allowances[owner][spender] = amount (#998)
Apply the check-effects-interactions pattern.

Additional information: link

Reentrancy in CoinToken._transfer(address,address,uint256) (#1002-1046):
External calls:
- swapAndLiquify(contractTokenBalance) (#1033)
- uniswapV2Router.addLiquidityETH{value: ethAmount}(address(this),tokenAmount,0,0,owner(),block.timestamp) (#1094-1101)
- uniswapV2Router.swapExactTokensForETHSupportingFeeOnTransferTokens(tokenAmount,0,path,address(this),block.timestamp) (#1080-1086)
External calls sending eth:
- swapAndLiquify(contractTokenBalance) (#1033)
- uniswapV2Router.addLiquidityETH{value: ethAmount}(address(this),tokenAmount,0,0,owner(),block.timestamp) (#1094-1101)
Event emitted after the call(s):
- Transfer(sender,recipient,tTransferAmount) (#1131)
- _tokenTransfer(from,to,amount,takeFee) (#1045)
- Transfer(sender,recipient,tTransferAmount) (#1141)
- _tokenTransfer(from,to,amount,takeFee) (#1045)
- Transfer(sender,recipient,tTransferAmount) (#1151)
- _tokenTransfer(from,to,amount,takeFee) (#1045)
- Transfer(sender,recipient,tTransferAmount) (#872)
- _tokenTransfer(from,to,amount,takeFee) (#1045)
Reentrancy in CoinToken.constructor(string,string,uint256,uint256,uint256,uint256,uint256,uint256,address,address) (#724-754):
External calls:
- uniswapV2Pair = IUniswapV2Factory(_uniswapV2Router.factory()).createPair(address(this),_uniswapV2Router.WETH()) (#742-743)
Event emitted after the call(s):
- Transfer(address(0),tokenOwner,_tTotal) (#753)
Reentrancy in CoinToken.swapAndLiquify(uint256) (#1048-1069):
External calls:
- swapTokensForEth(half) (#1060)
- uniswapV2Router.swapExactTokensForETHSupportingFeeOnTransferTokens(tokenAmount,0,path,address(this),block.timestamp) (#1080-1086)
- addLiquidity(otherHalf,newBalance) (#1066)
- uniswapV2Router.addLiquidityETH{value: ethAmount}(address(this),tokenAmount,0,0,owner(),block.timestamp) (#1094-1101)
External calls sending eth:
- addLiquidity(otherHalf,newBalance) (#1066)
- uniswapV2Router.addLiquidityETH{value: ethAmount}(address(this),tokenAmount,0,0,owner(),block.timestamp) (#1094-1101)
Event emitted after the call(s):
- Approval(owner,spender,amount) (#999)
- addLiquidity(otherHalf,newBalance) (#1066)
- SwapAndLiquify(half,newBalance,otherHalf) (#1068)
Reentrancy in CoinToken.transferFrom(address,address,uint256) (#792-796):
External calls:
- _transfer(sender,recipient,amount) (#793)
- uniswapV2Router.addLiquidityETH{value: ethAmount}(address(this),tokenAmount,0,0,owner(),block.timestamp) (#1094-1101)
- uniswapV2Router.swapExactTokensForETHSupportingFeeOnTransferTokens(tokenAmount,0,path,address(this),block.timestamp) (#1080-1086)
External calls sending eth:
- _transfer(sender,recipient,amount) (#793)
- uniswapV2Router.addLiquidityETH{value: ethAmount}(address(this),tokenAmount,0,0,owner(),block.timestamp) (#1094-1101)
Event emitted after the call(s):
- Approval(owner,spender,amount) (#999)
- _approve(sender,_msgSender(),_allowances[sender][_msgSender()].sub(amount,ERC20: transfer amount exceeds allowance)) (#794)
Apply the check-effects-interactions pattern.

Additional information: link

Ownable.unlock() (#451-456) uses timestamp for comparisons
Dangerous comparisons:
- require(bool,string)(now > _lockTime,Contract is locked until 7 days) (#453)
Avoid relying on block.timestamp.

Additional information: link

Address.isContract(address) (#264-273) uses assembly
- INLINE ASM (#271)
Address._functionCallWithValue(address,bytes,uint256,string) (#357-378) uses assembly
- INLINE ASM (#370-373)
Do not use evm assembly.

Additional information: link

Address._functionCallWithValue(address,bytes,uint256,string) (#357-378) is never used and should be removed
Address.functionCall(address,bytes) (#317-319) is never used and should be removed
Address.functionCall(address,bytes,string) (#327-329) is never used and should be removed
Address.functionCallWithValue(address,bytes,uint256) (#342-344) is never used and should be removed
Address.functionCallWithValue(address,bytes,uint256,string) (#352-355) is never used and should be removed
Address.isContract(address) (#264-273) is never used and should be removed
Address.sendValue(address,uint256) (#291-297) is never used and should be removed
Context._msgData() (#236-239) is never used and should be removed
SafeMath.mod(uint256,uint256) (#209-211) is never used and should be removed
SafeMath.mod(uint256,uint256,string) (#225-228) is never used and should be removed
Remove unused functions.

Additional information: link

Low level call in Address.sendValue(address,uint256) (#291-297):
- (success) = recipient.call{value: amount}() (#295)
Low level call in Address._functionCallWithValue(address,bytes,uint256,string) (#357-378):
- (success,returndata) = target.call{value: weiValue}(data) (#361)
Avoid low-level calls. Check the call success. If the call is meant for a contract, check for code existence

Additional information: link

Variable Ownable._owner (#394) is not in mixedCase
Function IUniswapV2Pair.DOMAIN_SEPARATOR() (#495) is not in mixedCase
Function IUniswapV2Pair.PERMIT_TYPEHASH() (#496) is not in mixedCase
Function IUniswapV2Pair.MINIMUM_LIQUIDITY() (#513) is not in mixedCase
Function IUniswapV2Router01.WETH() (#535) is not in mixedCase
Parameter CoinToken.setSwapAndLiquifyEnabled(bool)._enabled (#899) is not in mixedCase
Parameter CoinToken.calculateTaxFee(uint256)._amount (#963) is not in mixedCase
Parameter CoinToken.calculateLiquidityFee(uint256)._amount (#969) is not in mixedCase
Variable CoinToken._taxFee (#695) is not in mixedCase
Variable CoinToken._liquidityFee (#698) is not in mixedCase
Variable CoinToken._maxTxAmount (#707) is not in mixedCase
Follow the Solidity naming convention.

Additional information: link

Redundant expression "this (#237)" inContext (#231-240)
Remove redundant statements if they congest code but offer no value.

Additional information: link

Variable IUniswapV2Router01.addLiquidity(address,address,uint256,uint256,uint256,uint256,address,uint256).amountADesired (#540) is too similar to IUniswapV2Router01.addLiquidity(address,address,uint256,uint256,uint256,uint256,address,uint256).amountBDesired (#541)
Variable CoinToken.reflectionFromToken(uint256,bool).rTransferAmount (#831) is too similar to CoinToken._transferFromExcluded(address,address,uint256).tTransferAmount (#1145)
Variable CoinToken._transferFromExcluded(address,address,uint256).rTransferAmount (#1145) is too similar to CoinToken._transferToExcluded(address,address,uint256).tTransferAmount (#1135)
Variable CoinToken._getRValues(uint256,uint256,uint256,uint256).rTransferAmount (#929) is too similar to CoinToken._getTValues(uint256).tTransferAmount (#921)
Variable CoinToken._getValues(uint256).rTransferAmount (#914) is too similar to CoinToken._transferToExcluded(address,address,uint256).tTransferAmount (#1135)
Variable CoinToken._transferStandard(address,address,uint256).rTransferAmount (#1126) is too similar to CoinToken._transferToExcluded(address,address,uint256).tTransferAmount (#1135)
Variable CoinToken._getRValues(uint256,uint256,uint256,uint256).rTransferAmount (#929) is too similar to CoinToken._transferFromExcluded(address,address,uint256).tTransferAmount (#1145)
Variable CoinToken._transferBothExcluded(address,address,uint256).rTransferAmount (#865) is too similar to CoinToken._transferStandard(address,address,uint256).tTransferAmount (#1126)
Variable CoinToken._transferBothExcluded(address,address,uint256).rTransferAmount (#865) is too similar to CoinToken._transferBothExcluded(address,address,uint256).tTransferAmount (#865)
Variable CoinToken._transferToExcluded(address,address,uint256).rTransferAmount (#1135) is too similar to CoinToken._transferToExcluded(address,address,uint256).tTransferAmount (#1135)
Variable CoinToken.reflectionFromToken(uint256,bool).rTransferAmount (#831) is too similar to CoinToken._transferToExcluded(address,address,uint256).tTransferAmount (#1135)
Variable CoinToken._getValues(uint256).rTransferAmount (#914) is too similar to CoinToken._transferBothExcluded(address,address,uint256).tTransferAmount (#865)
Variable CoinToken._transferBothExcluded(address,address,uint256).rTransferAmount (#865) is too similar to CoinToken._getTValues(uint256).tTransferAmount (#921)
Variable CoinToken._getValues(uint256).rTransferAmount (#914) is too similar to CoinToken._transferStandard(address,address,uint256).tTransferAmount (#1126)
Variable CoinToken._transferStandard(address,address,uint256).rTransferAmount (#1126) is too similar to CoinToken._transferStandard(address,address,uint256).tTransferAmount (#1126)
Variable CoinToken._transferFromExcluded(address,address,uint256).rTransferAmount (#1145) is too similar to CoinToken._getTValues(uint256).tTransferAmount (#921)
Variable CoinToken._getRValues(uint256,uint256,uint256,uint256).rTransferAmount (#929) is too similar to CoinToken._transferToExcluded(address,address,uint256).tTransferAmount (#1135)
Variable CoinToken._getValues(uint256).rTransferAmount (#914) is too similar to CoinToken._getTValues(uint256).tTransferAmount (#921)
Variable CoinToken._transferBothExcluded(address,address,uint256).rTransferAmount (#865) is too similar to CoinToken._transferFromExcluded(address,address,uint256).tTransferAmount (#1145)
Variable CoinToken._transferStandard(address,address,uint256).rTransferAmount (#1126) is too similar to CoinToken._getTValues(uint256).tTransferAmount (#921)
Variable CoinToken._transferFromExcluded(address,address,uint256).rTransferAmount (#1145) is too similar to CoinToken._transferFromExcluded(address,address,uint256).tTransferAmount (#1145)
Variable CoinToken._getValues(uint256).rTransferAmount (#914) is too similar to CoinToken._transferFromExcluded(address,address,uint256).tTransferAmount (#1145)
Variable CoinToken._transferToExcluded(address,address,uint256).rTransferAmount (#1135) is too similar to CoinToken._getTValues(uint256).tTransferAmount (#921)
Variable CoinToken._transferStandard(address,address,uint256).rTransferAmount (#1126) is too similar to CoinToken._transferFromExcluded(address,address,uint256).tTransferAmount (#1145)
Variable CoinToken.reflectionFromToken(uint256,bool).rTransferAmount (#831) is too similar to CoinToken._getTValues(uint256).tTransferAmount (#921)
Variable CoinToken._transferBothExcluded(address,address,uint256).rTransferAmount (#865) is too similar to CoinToken._transferToExcluded(address,address,uint256).tTransferAmount (#1135)
Variable CoinToken._transferToExcluded(address,address,uint256).rTransferAmount (#1135) is too similar to CoinToken._transferFromExcluded(address,address,uint256).tTransferAmount (#1145)
Variable CoinToken._transferFromExcluded(address,address,uint256).rTransferAmount (#1145) is too similar to CoinToken._getValues(uint256).tTransferAmount (#913)
Variable CoinToken._transferToExcluded(address,address,uint256).rTransferAmount (#1135) is too similar to CoinToken._transferBothExcluded(address,address,uint256).tTransferAmount (#865)
Variable CoinToken._getValues(uint256).rTransferAmount (#914) is too similar to CoinToken._getValues(uint256).tTransferAmount (#913)
Variable CoinToken._transferToExcluded(address,address,uint256).rTransferAmount (#1135) is too similar to CoinToken._transferStandard(address,address,uint256).tTransferAmount (#1126)
Variable CoinToken._transferToExcluded(address,address,uint256).rTransferAmount (#1135) is too similar to CoinToken._getValues(uint256).tTransferAmount (#913)
Variable CoinToken._transferStandard(address,address,uint256).rTransferAmount (#1126) is too similar to CoinToken._transferBothExcluded(address,address,uint256).tTransferAmount (#865)
Variable CoinToken.reflectionFromToken(uint256,bool).rTransferAmount (#831) is too similar to CoinToken._transferBothExcluded(address,address,uint256).tTransferAmount (#865)
Variable CoinToken._getRValues(uint256,uint256,uint256,uint256).rTransferAmount (#929) is too similar to CoinToken._transferBothExcluded(address,address,uint256).tTransferAmount (#865)
Variable CoinToken._transferFromExcluded(address,address,uint256).rTransferAmount (#1145) is too similar to CoinToken._transferBothExcluded(address,address,uint256).tTransferAmount (#865)
Variable CoinToken._transferStandard(address,address,uint256).rTransferAmount (#1126) is too similar to CoinToken._getValues(uint256).tTransferAmount (#913)
Variable CoinToken._transferBothExcluded(address,address,uint256).rTransferAmount (#865) is too similar to CoinToken._getValues(uint256).tTransferAmount (#913)
Variable CoinToken._getRValues(uint256,uint256,uint256,uint256).rTransferAmount (#929) is too similar to CoinToken._transferStandard(address,address,uint256).tTransferAmount (#1126)
Variable CoinToken.reflectionFromToken(uint256,bool).rTransferAmount (#831) is too similar to CoinToken._transferStandard(address,address,uint256).tTransferAmount (#1126)
Variable CoinToken.reflectionFromToken(uint256,bool).rTransferAmount (#831) is too similar to CoinToken._getValues(uint256).tTransferAmount (#913)
Variable CoinToken._getRValues(uint256,uint256,uint256,uint256).rTransferAmount (#929) is too similar to CoinToken._getValues(uint256).tTransferAmount (#913)
Variable CoinToken._transferFromExcluded(address,address,uint256).rTransferAmount (#1145) is too similar to CoinToken._transferStandard(address,address,uint256).tTransferAmount (#1126)
Prevent variables from having similar names.

Additional information: link

renounceOwnership() should be declared external:
- Ownable.renounceOwnership() (#423-426)
transferOwnership(address) should be declared external:
- Ownable.transferOwnership(address) (#432-436)
geUnlockTime() should be declared external:
- Ownable.geUnlockTime() (#438-440)
lock(uint256) should be declared external:
- Ownable.lock(uint256) (#443-448)
unlock() should be declared external:
- Ownable.unlock() (#451-456)
name() should be declared external:
- CoinToken.name() (#757-759)
symbol() should be declared external:
- CoinToken.symbol() (#761-763)
decimals() should be declared external:
- CoinToken.decimals() (#765-767)
totalSupply() should be declared external:
- CoinToken.totalSupply() (#769-771)
transfer(address,uint256) should be declared external:
- CoinToken.transfer(address,uint256) (#778-781)
allowance(address,address) should be declared external:
- CoinToken.allowance(address,address) (#783-785)
approve(address,uint256) should be declared external:
- CoinToken.approve(address,uint256) (#787-790)
transferFrom(address,address,uint256) should be declared external:
- CoinToken.transferFrom(address,address,uint256) (#792-796)
increaseAllowance(address,uint256) should be declared external:
- CoinToken.increaseAllowance(address,uint256) (#798-801)
decreaseAllowance(address,uint256) should be declared external:
- CoinToken.decreaseAllowance(address,uint256) (#803-806)
isExcludedFromReward(address) should be declared external:
- CoinToken.isExcludedFromReward(address) (#808-810)
totalFees() should be declared external:
- CoinToken.totalFees() (#812-814)
deliver(uint256) should be declared external:
- CoinToken.deliver(uint256) (#816-823)
reflectionFromToken(uint256,bool) should be declared external:
- CoinToken.reflectionFromToken(uint256,bool) (#825-834)
excludeFromReward(address) should be declared external:
- CoinToken.excludeFromReward(address) (#842-850)
excludeFromFee(address) should be declared external:
- CoinToken.excludeFromFee(address) (#875-877)
includeInFee(address) should be declared external:
- CoinToken.includeInFee(address) (#879-881)
setNumTokensSellToAddToLiquidity(uint256) should be declared external:
- CoinToken.setNumTokensSellToAddToLiquidity(uint256) (#891-893)
setMaxTxPercent(uint256) should be declared external:
- CoinToken.setMaxTxPercent(uint256) (#895-897)
setSwapAndLiquifyEnabled(bool) should be declared external:
- CoinToken.setSwapAndLiquifyEnabled(bool) (#899-902)
claimTokens() should be declared external:
- CoinToken.claimTokens() (#959-961)
isExcludedFromFee(address) should be declared external:
- CoinToken.isExcludedFromFee(address) (#990-992)
Use the external attribute for functions never called from the contract.

Additional information: link

Holders:


Average 30d PancakeSwap liquidity is less than $100. Token is either dead or inactive.


Average 30d number of PancakeSwap swaps is less than 1. Token is either dead or inactive.


Token is deployed only at one blockchain


Token has only one trading pair

Contract has 10% buy tax and 9% sell tax.
Taxes are low and contract ownership is renounced.


Unable to find Blog account (Reddit or Medium)


Unable to find Discord account


Unable to find token contract audit


Unable to find audit link on the website


Young tokens have high risks of scam / price dump / death


Young tokens have high risks of price dump / death


Young tokens have high risks of price dump / death


Young tokens have high risks of price dump / death


Young tokens have high risks of price dump / death


Token has relatively low CoinGecko rank


Token has relatively low CoinMarketCap rank

Price for $RFG

News for $RFG