Unable to find manual contract audit (e.g. Certik, PeckShield, Solidity...)
KillKitty.swapBack() (#585-631) sends eth to arbitrary user
Dangerous calls:
- (tmpSuccess) = address(marketingFeeReceiver).call{gas: 30000,value: amountBNBMarketing}() (#614)
- (tmpSuccess,None) = address(ecosystemfeeReceiver).call{gas: 30000,value: amountBNBDev}() (#615)
Ensure that an arbitrary user cannot withdraw unauthorized funds.
Additional information: link
Reentrancy in KillKitty._transferFrom(address,address,uint256) (#465-514):
External calls:
- swapBack() (#493)
- router.swapExactTokensForETHSupportingFeeOnTransferTokens(amountToSwap,0,path,address(this),block.timestamp) (#596-602)
- distributor.deposit{value: amountBNBReflection}() (#613)
- (tmpSuccess) = address(marketingFeeReceiver).call{gas: 30000,value: amountBNBMarketing}() (#614)
- (tmpSuccess,None) = address(ecosystemfeeReceiver).call{gas: 30000,value: amountBNBDev}() (#615)
- router.addLiquidityETH{value: amountBNBLiquidity}(address(this),amountToLiquify,0,0,autoLiquidityReceiver,block.timestamp) (#621-628)
External calls sending eth:
- swapBack() (#493)
- distributor.deposit{value: amountBNBReflection}() (#613)
- (tmpSuccess) = address(marketingFeeReceiver).call{gas: 30000,value: amountBNBMarketing}() (#614)
- (tmpSuccess,None) = address(ecosystemfeeReceiver).call{gas: 30000,value: amountBNBDev}() (#615)
- router.addLiquidityETH{value: amountBNBLiquidity}(address(this),amountToLiquify,0,0,autoLiquidityReceiver,block.timestamp) (#621-628)
State variables written after the call(s):
- _balances[sender] = _balances[sender].sub(amount,Insufficient Balance) (#496)
- _balances[recipient] = _balances[recipient].add(amountReceived) (#499)
- amountReceived = takeFee(sender,amount,(recipient == pair)) (#498)
- _balances[address(this)] = _balances[address(this)].add(contractTokens) (#539)
- _balances[burnFeeReceiver] = _balances[burnFeeReceiver].add(burnTokens) (#540)
Apply the check-effects-interactions pattern.
Additional information: link
DividendDistributor.distributeDividend(address) (#283-294) ignores return value by RWRD.transfer(shareholder,amount) (#289)
Use SafeERC20, or ensure that the transfer/transferFrom return value is checked.
Additional information: link
Too many vulnerabilities (Unchecked transfer, Reentrancy vulnerability, etc.). High risk of a scam. DYOR & manual audit are advised.
KillKitty.swapBack().tmpSuccess (#614) is written in both
(tmpSuccess) = address(marketingFeeReceiver).call{gas: 30000,value: amountBNBMarketing}() (#614)
(tmpSuccess,None) = address(ecosystemfeeReceiver).call{gas: 30000,value: amountBNBDev}() (#615)
KillKitty.swapBack().tmpSuccess (#614) is written in both
(tmpSuccess,None) = address(ecosystemfeeReceiver).call{gas: 30000,value: amountBNBDev}() (#615)
tmpSuccess = false (#618)
Fix or remove the writes.
Additional information: link
Combination 1: Reentrancy vulnerabilities + Functions that send Ether to arbitraty destination. Usual for scams. May be justified by some complex mechanics (e.g. rebase, reflections). DYOR & manual audit are advised.
Combination 2: Unchecked transfer + Functions that send Ether to arbitraty destination. Usual for scams. May be justified by some complex mechanics (e.g. rebase, reflections). DYOR & manual audit are advised.
Combination 3: Reentrancy vulnerabilities + Unchecked transfer vulnerability. Usual for scams. May be justified by some complex mechanics (e.g. rebase, reflections). DYOR & manual audit are advised.
Contract ticker ($KKIT) contains non-alphanumeric characters.
Not a direct threat, but may indicate unreliable intentions of developer. Non-alphanumeric chars (,.;!#*&") are extremely rare among low risk tokens.
Variable IDEXRouter.addLiquidity(address,address,uint256,uint256,uint256,uint256,address,uint256).amountADesired (#113) is too similar to IDEXRouter.addLiquidity(address,address,uint256,uint256,uint256,uint256,address,uint256).amountBDesired (#114)
Prevent variables from having similar names.
Additional information: link
KillKitty.takeFee(address,uint256,bool) (#531-548) performs a multiplication on the result of a division:
-feeAmount = amount.mul(totalFee).mul(multiplier).div(feeDenominator * 100) (#534)
-burnTokens = feeAmount.mul(burnFee).div(totalFee) (#536)
Consider ordering multiplication before division.
Additional information: link
Reentrancy in DividendDistributor.distributeDividend(address) (#283-294):
External calls:
- RWRD.transfer(shareholder,amount) (#289)
State variables written after the call(s):
- shares[shareholder].totalRealised = shares[shareholder].totalRealised.add(amount) (#291)
- shares[shareholder].totalExcluded = getCumulativeDividends(shares[shareholder].amount) (#292)
Reentrancy in DividendDistributor.process(uint256) (#252-276):
External calls:
- distributeDividend(shareholders[currentIndex]) (#268)
- RWRD.transfer(shareholder,amount) (#289)
State variables written after the call(s):
- currentIndex ++ (#273)
Reentrancy in DividendDistributor.setShare(address,uint256) (#216-230):
External calls:
- distributeDividend(shareholder) (#218)
- RWRD.transfer(shareholder,amount) (#289)
State variables written after the call(s):
- shares[shareholder].amount = amount (#228)
- shares[shareholder].totalExcluded = getCumulativeDividends(shares[shareholder].amount) (#229)
Apply the check-effects-interactions pattern.
Additional information: link
KillKitty.manage_blacklist(address[],bool).i (#649) is a local variable never initialized
Initialize all the variables. If a variable is meant to be initialized to zero, explicitly set it to zero to improve code readability.
Additional information: link
KillKitty.swapBack() (#585-631) ignores return value by router.addLiquidityETH{value: amountBNBLiquidity}(address(this),amountToLiquify,0,0,autoLiquidityReceiver,block.timestamp) (#621-628)
Ensure that all the return values of the function calls are used.
Additional information: link
KillKitty.slitherConstructorVariables() (#327-769) uses literals with too many digits:
- DEAD = 0x000000000000000000000000000000000000dEaD (#331)
KillKitty.slitherConstructorVariables() (#327-769) uses literals with too many digits:
- ZERO = 0x0000000000000000000000000000000000000000 (#332)
KillKitty.slitherConstructorVariables() (#327-769) uses literals with too many digits:
- distributorGas = 500000 (#383)
Use: Ether suffix, Time suffix, or The scientific notation
Additional information: link
DividendDistributor.WBNB (#173) should be constant
DividendDistributor.dividendsPerShareAccuracyFactor (#186) should be constant
KillKitty.DEAD (#331) should be constant
KillKitty.WBNB (#330) should be constant
KillKitty.ZERO (#332) should be constant
KillKitty._totalSupply (#338) should be constant
Add the constant attributes to state variables that never change.
Additional information: link
DividendDistributor.setDistributionCriteria(uint256,uint256) (#211-214) should emit an event for:
- minPeriod = _minPeriod (#212)
- minDistribution = _minDistribution (#213)
KillKitty.setMaxTxPercent_base1000(uint256) (#456-458) should emit an event for:
- _maxTxAmount = (_totalSupply * maxTXPercentage_base1000) / 1000 (#457)
KillKitty.setTxLimit(uint256) (#460-462) should emit an event for:
- _maxTxAmount = amount (#461)
KillKitty.set_sell_multiplier(uint256) (#567-569) should emit an event for:
- sellMultiplier = Multiplier (#568)
KillKitty.setFees(uint256,uint256,uint256,uint256,uint256,uint256) (#667-676) should emit an event for:
- liquidityFee = _liquidityFee (#668)
- reflectionFee = _reflectionFee (#669)
- marketingFee = _marketingFee (#670)
- ecosystemfee = _ecosystemfee (#671)
- burnFee = _burnFee (#672)
- totalFee = _liquidityFee.add(_reflectionFee).add(_marketingFee).add(_ecosystemfee).add(_burnFee) (#673)
- feeDenominator = _feeDenominator (#674)
KillKitty.setSwapBackSettings(bool,uint256) (#685-688) should emit an event for:
- swapThreshold = _amount (#687)
KillKitty.setTargetLiquidity(uint256,uint256) (#690-693) should emit an event for:
- targetLiquidity = _target (#691)
- targetLiquidityDenominator = _denominator (#692)
Emit an event for critical parameter changes.
Additional information: link
Auth.transferOwnership(address).adr (#93) lacks a zero-check on :
- owner = adr (#94)
KillKitty.setFeeReceivers(address,address,address,address)._autoLiquidityReceiver (#678) lacks a zero-check on :
- autoLiquidityReceiver = _autoLiquidityReceiver (#679)
KillKitty.setFeeReceivers(address,address,address,address)._marketingFeeReceiver (#678) lacks a zero-check on :
- marketingFeeReceiver = _marketingFeeReceiver (#680)
KillKitty.setFeeReceivers(address,address,address,address)._ecosystemfeeReceiver (#678) lacks a zero-check on :
- ecosystemfeeReceiver = _ecosystemfeeReceiver (#681)
KillKitty.setFeeReceivers(address,address,address,address)._burnFeeReceiver (#678) lacks a zero-check on :
- burnFeeReceiver = _burnFeeReceiver (#682)
Check that the address is not zero.
Additional information: link
DividendDistributor.distributeDividend(address) (#283-294) has external calls inside a loop: RWRD.transfer(shareholder,amount) (#289)
KillKitty.multiTransfer(address,address[],uint256[]) (#719-743) has external calls inside a loop: distributor.setShare(addresses[i_scope_0],_balances[addresses[i_scope_0]]) (#735)
KillKitty.multiTransfer_fixed(address,address[],uint256) (#745-764) has external calls inside a loop: distributor.setShare(addresses[i],_balances[addresses[i]]) (#756)
Favor pull over push strategy for external calls.
Additional information: link
Reentrancy in KillKitty.constructor() (#394-419):
External calls:
- pair = IDEXFactory(router.factory()).createPair(WBNB,address(this)) (#396)
State variables written after the call(s):
- _allowances[address(this)][address(router)] = uint256(- 1) (#397)
- _balances[msg.sender] = _totalSupply (#417)
- autoLiquidityReceiver = msg.sender (#412)
- burnFeeReceiver = DEAD (#415)
- distributor = new DividendDistributor(address(router)) (#399)
- ecosystemfeeReceiver = 0xcC04523C78B1Bd5F1537F539279e01B47c3888ac (#414)
- isDividendExempt[pair] = true (#408)
- isDividendExempt[address(this)] = true (#409)
- isDividendExempt[DEAD] = true (#410)
- isFeeExempt[msg.sender] = true (#401)
- isTimelockExempt[msg.sender] = true (#404)
- isTimelockExempt[DEAD] = true (#405)
- isTimelockExempt[address(this)] = true (#406)
- isTxLimitExempt[msg.sender] = true (#402)
- marketingFeeReceiver = 0xcC04523C78B1Bd5F1537F539279e01B47c3888ac (#413)
Reentrancy in DividendDistributor.deposit() (#232-250):
External calls:
- router.swapExactETHForTokensSupportingFeeOnTransferTokens{value: msg.value}(0,path,address(this),block.timestamp) (#239-244)
State variables written after the call(s):
- dividendsPerShare = dividendsPerShare.add(dividendsPerShareAccuracyFactor.mul(amount).div(totalShares)) (#249)
- totalDividends = totalDividends.add(amount) (#248)
Reentrancy in DividendDistributor.distributeDividend(address) (#283-294):
External calls:
- RWRD.transfer(shareholder,amount) (#289)
State variables written after the call(s):
- shareholderClaims[shareholder] = block.timestamp (#290)
Reentrancy in DividendDistributor.setShare(address,uint256) (#216-230):
External calls:
- distributeDividend(shareholder) (#218)
- RWRD.transfer(shareholder,amount) (#289)
State variables written after the call(s):
- addShareholder(shareholder) (#222)
- shareholderIndexes[shareholder] = shareholders.length (#316)
- removeShareholder(shareholder) (#224)
- shareholderIndexes[shareholders[shareholders.length - 1]] = shareholderIndexes[shareholder] (#322)
- addShareholder(shareholder) (#222)
- shareholders.push(shareholder) (#317)
- removeShareholder(shareholder) (#224)
- shareholders[shareholderIndexes[shareholder]] = shareholders[shareholders.length - 1] (#321)
- shareholders.pop() (#323)
- totalShares = totalShares.sub(shares[shareholder].amount).add(amount) (#227)
Apply the check-effects-interactions pattern.
Additional information: link
Reentrancy in KillKitty._transferFrom(address,address,uint256) (#465-514):
External calls:
- swapBack() (#493)
- router.swapExactTokensForETHSupportingFeeOnTransferTokens(amountToSwap,0,path,address(this),block.timestamp) (#596-602)
- distributor.deposit{value: amountBNBReflection}() (#613)
- (tmpSuccess) = address(marketingFeeReceiver).call{gas: 30000,value: amountBNBMarketing}() (#614)
- (tmpSuccess,None) = address(ecosystemfeeReceiver).call{gas: 30000,value: amountBNBDev}() (#615)
- router.addLiquidityETH{value: amountBNBLiquidity}(address(this),amountToLiquify,0,0,autoLiquidityReceiver,block.timestamp) (#621-628)
- distributor.setShare(sender,_balances[sender]) (#503)
- distributor.setShare(recipient,_balances[recipient]) (#507)
- distributor.process(distributorGas) (#510)
External calls sending eth:
- swapBack() (#493)
- distributor.deposit{value: amountBNBReflection}() (#613)
- (tmpSuccess) = address(marketingFeeReceiver).call{gas: 30000,value: amountBNBMarketing}() (#614)
- (tmpSuccess,None) = address(ecosystemfeeReceiver).call{gas: 30000,value: amountBNBDev}() (#615)
- router.addLiquidityETH{value: amountBNBLiquidity}(address(this),amountToLiquify,0,0,autoLiquidityReceiver,block.timestamp) (#621-628)
Event emitted after the call(s):
- Transfer(sender,recipient,amountReceived) (#512)
Reentrancy in KillKitty._transferFrom(address,address,uint256) (#465-514):
External calls:
- swapBack() (#493)
- router.swapExactTokensForETHSupportingFeeOnTransferTokens(amountToSwap,0,path,address(this),block.timestamp) (#596-602)
- distributor.deposit{value: amountBNBReflection}() (#613)
- (tmpSuccess) = address(marketingFeeReceiver).call{gas: 30000,value: amountBNBMarketing}() (#614)
- (tmpSuccess,None) = address(ecosystemfeeReceiver).call{gas: 30000,value: amountBNBDev}() (#615)
- router.addLiquidityETH{value: amountBNBLiquidity}(address(this),amountToLiquify,0,0,autoLiquidityReceiver,block.timestamp) (#621-628)
External calls sending eth:
- swapBack() (#493)
- distributor.deposit{value: amountBNBReflection}() (#613)
- (tmpSuccess) = address(marketingFeeReceiver).call{gas: 30000,value: amountBNBMarketing}() (#614)
- (tmpSuccess,None) = address(ecosystemfeeReceiver).call{gas: 30000,value: amountBNBDev}() (#615)
- router.addLiquidityETH{value: amountBNBLiquidity}(address(this),amountToLiquify,0,0,autoLiquidityReceiver,block.timestamp) (#621-628)
Event emitted after the call(s):
- Transfer(sender,address(this),contractTokens) (#541)
- amountReceived = takeFee(sender,amount,(recipient == pair)) (#498)
- Transfer(sender,burnFeeReceiver,burnTokens) (#544)
- amountReceived = takeFee(sender,amount,(recipient == pair)) (#498)
Reentrancy in KillKitty.constructor() (#394-419):
External calls:
- pair = IDEXFactory(router.factory()).createPair(WBNB,address(this)) (#396)
Event emitted after the call(s):
- Transfer(address(0),msg.sender,_totalSupply) (#418)
Reentrancy in KillKitty.swapBack() (#585-631):
External calls:
- router.swapExactTokensForETHSupportingFeeOnTransferTokens(amountToSwap,0,path,address(this),block.timestamp) (#596-602)
- distributor.deposit{value: amountBNBReflection}() (#613)
- (tmpSuccess) = address(marketingFeeReceiver).call{gas: 30000,value: amountBNBMarketing}() (#614)
- (tmpSuccess,None) = address(ecosystemfeeReceiver).call{gas: 30000,value: amountBNBDev}() (#615)
- router.addLiquidityETH{value: amountBNBLiquidity}(address(this),amountToLiquify,0,0,autoLiquidityReceiver,block.timestamp) (#621-628)
External calls sending eth:
- distributor.deposit{value: amountBNBReflection}() (#613)
- (tmpSuccess) = address(marketingFeeReceiver).call{gas: 30000,value: amountBNBMarketing}() (#614)
- (tmpSuccess,None) = address(ecosystemfeeReceiver).call{gas: 30000,value: amountBNBDev}() (#615)
- router.addLiquidityETH{value: amountBNBLiquidity}(address(this),amountToLiquify,0,0,autoLiquidityReceiver,block.timestamp) (#621-628)
Event emitted after the call(s):
- AutoLiquify(amountBNBLiquidity,amountToLiquify) (#629)
Apply the check-effects-interactions pattern.
Additional information: link
DividendDistributor.shouldDistribute(address) (#278-281) uses timestamp for comparisons
Dangerous comparisons:
- shareholderClaims[shareholder] + minPeriod < block.timestamp && getUnpaidEarnings(shareholder) > minDistribution (#279-280)
KillKitty._transferFrom(address,address,uint256) (#465-514) uses timestamp for comparisons
Dangerous comparisons:
- require(bool,string)(cooldownTimer[recipient] < block.timestamp,Please wait for 1min between two buys) (#486)
Avoid relying on block.timestamp.
Additional information: link
DividendDistributor.process(uint256) (#252-276) has costly operations inside a loop:
- currentIndex = 0 (#264)
DividendDistributor.distributeDividend(address) (#283-294) has costly operations inside a loop:
- totalDistributed = totalDistributed.add(amount) (#288)
DividendDistributor.process(uint256) (#252-276) has costly operations inside a loop:
- currentIndex ++ (#273)
Use a local variable to hold the loop computation result.
Additional information: link
KillKitty._maxTxAmount (#340) is set pre-construction with a non-constant function or state variable:
- _totalSupply.mul(2).div(100)
KillKitty._maxWalletToken (#341) is set pre-construction with a non-constant function or state variable:
- _totalSupply.mul(2).div(100)
KillKitty.totalFee (#360) is set pre-construction with a non-constant function or state variable:
- marketingFee + reflectionFee + liquidityFee + ecosystemfee + burnFee
KillKitty.swapThreshold (#390) is set pre-construction with a non-constant function or state variable:
- _totalSupply * 10 / 10000
Remove any initialization of state variables via non-constant state variables or function calls. If variables must be set upon contract deployment, locate initialization in the constructor instead.
Additional information: link
Pragma version^0.7.4 (#3) allows old versions
solc-0.7.4 is not recommended for deployment
Deploy with any of the following Solidity versions: 0.5.16 - 0.5.17, 0.6.11 - 0.6.12, 0.7.5 - 0.7.6 Use a simple pragma version that allows any of these versions. Consider using the latest version of Solidity for testing.
Additional information: link
Low level call in KillKitty.swapBack() (#585-631):
- (tmpSuccess) = address(marketingFeeReceiver).call{gas: 30000,value: amountBNBMarketing}() (#614)
- (tmpSuccess,None) = address(ecosystemfeeReceiver).call{gas: 30000,value: amountBNBDev}() (#615)
Avoid low-level calls. Check the call success. If the call is meant for a contract, check for code existence
Additional information: link
Function IDEXRouter.WETH() (#108) is not in mixedCase
Parameter DividendDistributor.setDistributionCriteria(uint256,uint256)._minPeriod (#211) is not in mixedCase
Parameter DividendDistributor.setDistributionCriteria(uint256,uint256)._minDistribution (#211) is not in mixedCase
Variable DividendDistributor._token (#164) is not in mixedCase
Variable DividendDistributor.RWRD (#172) is not in mixedCase
Variable DividendDistributor.WBNB (#173) is not in mixedCase
Function KillKitty.setMaxWalletPercent_base1000(uint256) (#453-455) is not in mixedCase
Parameter KillKitty.setMaxWalletPercent_base1000(uint256).maxWallPercent_base1000 (#453) is not in mixedCase
Function KillKitty.setMaxTxPercent_base1000(uint256) (#456-458) is not in mixedCase
Parameter KillKitty.setMaxTxPercent_base1000(uint256).maxTXPercentage_base1000 (#456) is not in mixedCase
Function KillKitty.clearStuckBalance_sender(uint256) (#562-565) is not in mixedCase
Function KillKitty.set_sell_multiplier(uint256) (#567-569) is not in mixedCase
Parameter KillKitty.set_sell_multiplier(uint256).Multiplier (#567) is not in mixedCase
Parameter KillKitty.tradingAllowed(uint256,uint256)._swapAt (#572) is not in mixedCase
Parameter KillKitty.tradingAllowed(uint256,uint256)._swapDelay (#572) is not in mixedCase
Parameter KillKitty.cooldownEnabled(bool,uint8)._status (#580) is not in mixedCase
Parameter KillKitty.cooldownEnabled(bool,uint8)._interval (#580) is not in mixedCase
Function KillKitty.enable_blacklist(bool) (#644-646) is not in mixedCase
Parameter KillKitty.enable_blacklist(bool)._status (#644) is not in mixedCase
Function KillKitty.manage_blacklist(address[],bool) (#648-652) is not in mixedCase
Parameter KillKitty.setFees(uint256,uint256,uint256,uint256,uint256,uint256)._liquidityFee (#667) is not in mixedCase
Parameter KillKitty.setFees(uint256,uint256,uint256,uint256,uint256,uint256)._reflectionFee (#667) is not in mixedCase
Parameter KillKitty.setFees(uint256,uint256,uint256,uint256,uint256,uint256)._marketingFee (#667) is not in mixedCase
Parameter KillKitty.setFees(uint256,uint256,uint256,uint256,uint256,uint256)._ecosystemfee (#667) is not in mixedCase
Parameter KillKitty.setFees(uint256,uint256,uint256,uint256,uint256,uint256)._burnFee (#667) is not in mixedCase
Parameter KillKitty.setFees(uint256,uint256,uint256,uint256,uint256,uint256)._feeDenominator (#667) is not in mixedCase
Parameter KillKitty.setFeeReceivers(address,address,address,address)._autoLiquidityReceiver (#678) is not in mixedCase
Parameter KillKitty.setFeeReceivers(address,address,address,address)._marketingFeeReceiver (#678) is not in mixedCase
Parameter KillKitty.setFeeReceivers(address,address,address,address)._ecosystemfeeReceiver (#678) is not in mixedCase
Parameter KillKitty.setFeeReceivers(address,address,address,address)._burnFeeReceiver (#678) is not in mixedCase
Parameter KillKitty.setSwapBackSettings(bool,uint256)._enabled (#685) is not in mixedCase
Parameter KillKitty.setSwapBackSettings(bool,uint256)._amount (#685) is not in mixedCase
Parameter KillKitty.setTargetLiquidity(uint256,uint256)._target (#690) is not in mixedCase
Parameter KillKitty.setTargetLiquidity(uint256,uint256)._denominator (#690) is not in mixedCase
Parameter KillKitty.setDistributionCriteria(uint256,uint256)._minPeriod (#695) is not in mixedCase
Parameter KillKitty.setDistributionCriteria(uint256,uint256)._minDistribution (#695) is not in mixedCase
Function KillKitty.multiTransfer_fixed(address,address[],uint256) (#745-764) is not in mixedCase
Variable KillKitty.WBNB (#330) is not in mixedCase
Variable KillKitty.DEAD (#331) is not in mixedCase
Variable KillKitty.ZERO (#332) is not in mixedCase
Constant KillKitty._name (#334) is not in UPPER_CASE_WITH_UNDERSCORES
Constant KillKitty._symbol (#335) is not in UPPER_CASE_WITH_UNDERSCORES
Constant KillKitty._decimals (#336) is not in UPPER_CASE_WITH_UNDERSCORES
Variable KillKitty._totalSupply (#338) is not in mixedCase
Variable KillKitty._maxTxAmount (#340) is not in mixedCase
Variable KillKitty._maxWalletToken (#341) is not in mixedCase
Variable KillKitty._balances (#343) is not in mixedCase
Variable KillKitty._allowances (#344) is not in mixedCase
Follow the Solidity naming convention.
Additional information: link
authorize(address) should be declared external:
- Auth.authorize(address) (#77-79)
unauthorize(address) should be declared external:
- Auth.unauthorize(address) (#81-83)
transferOwnership(address) should be declared external:
- Auth.transferOwnership(address) (#93-97)
tradingAllowed(uint256,uint256) should be declared external:
- KillKitty.tradingAllowed(uint256,uint256) (#572-577)
cooldownEnabled(bool,uint8) should be declared external:
- KillKitty.cooldownEnabled(bool,uint8) (#580-583)
enable_blacklist(bool) should be declared external:
- KillKitty.enable_blacklist(bool) (#644-646)
manage_blacklist(address[],bool) should be declared external:
- KillKitty.manage_blacklist(address[],bool) (#648-652)
Use the external attribute for functions never called from the contract.
Additional information: link
Unable to find website, listings and other project-related information
Young tokens have high risks of scam / price dump / death
Token has no active CoinGecko listing / rank
Token has no active CoinMarketCap listing / rank
Unable to find Telegram and Twitter accounts