HiDOGE [happiness doge] Token

Unable to find manual contract audit (e.g. Certik, PeckShield, Solidity...)

Reentrancy in token._transfer(address,address,uint256) (#1135-1176):
External calls:
- swapAndLiquify(contractTokenBalance) (#1163)
- uniswapV2Router.addLiquidityETH{value: ethAmount}(address(this),tokenAmount,0,0,address(this),block.timestamp) (#881-888)
- uniswapV2Router.swapExactTokensForETHSupportingFeeOnTransferTokens(tokenAmount,0,path,address(this),block.timestamp) (#1215-1221)
- uniswapV2Router.swapExactTokensForTokensSupportingFeeOnTransferTokens(tokenAmount,0,path,address(this),block.timestamp) (#1234-1240)
- IERC20(husdtToken).transfer(address(devAddress),dividends) (#1242)
External calls sending eth:
- swapAndLiquify(contractTokenBalance) (#1163)
- uniswapV2Router.addLiquidityETH{value: ethAmount}(address(this),tokenAmount,0,0,address(this),block.timestamp) (#881-888)
State variables written after the call(s):
- _tokenTransfer(from,to,amount,takeFee) (#1175)
- _devFee = _previousDevFee (#1120)
- _devFee = 0 (#1113)
- _tokenTransfer(from,to,amount,takeFee) (#1175)
- _liquidityFee = _previousLiquidityFee (#1118)
- _liquidityFee = 0 (#1111)
- _tokenTransfer(from,to,amount,takeFee) (#1175)
- _rOwned[address(this)] = _rOwned[address(this)].add(rLiquidity) (#1074)
- _rOwned[burnAddress] = _rOwned[burnAddress].add(rBurn) (#960)
- _rOwned[devAddress] = _rOwned[devAddress].add(rDev) (#970)
- _rOwned[address(this)] = _rOwned[address(this)].add(rDev) (#972)
- _rOwned[sender] = _rOwned[sender].sub(rAmount) (#904)
- _rOwned[recipient] = _rOwned[recipient].add(rTransferAmount) (#905)
- _tokenTransfer(from,to,amount,takeFee) (#1175)
- _rTotal = _rTotal.sub(rFee) (#1019)
Apply the check-effects-interactions pattern.

Additional information: link

token.swapTokensForDividendToken(uint256) (#1224-1244) ignores return value by IERC20(husdtToken).transfer(address(devAddress),dividends) (#1242)
Use SafeERC20, or ensure that the transfer/transferFrom return value is checked.

Additional information: link

Contract ownership is not renounced (belongs to a wallet)

Combination 3: Reentrancy vulnerabilities + Unchecked transfer vulnerability. Usual for scams. May be justified by some complex mechanics (e.g. rebase, reflections). DYOR & manual audit are advised.

token.swapAndLiquify(uint256) (#1178-1203) performs a multiplication on the result of a division:
-addHl = uint256(100).mul(_liquidityFee).div(_liquidityFee.add(lsDevFee)) (#1183)
-addNumber = contractTokenBalance.mul(addHl).div(100) (#1184)
Consider ordering multiplication before division.

Additional information: link

PancakeLibrary.getAmountsOut(address,uint256,address[]).i (#742) is a local variable never initialized
Initialize all the variables. If a variable is meant to be initialized to zero, explicitly set it to zero to improve code readability.

Additional information: link

token.addLiquidity(uint256,uint256) (#876-889) ignores return value by uniswapV2Router.addLiquidityETH{value: ethAmount}(address(this),tokenAmount,0,0,address(this),block.timestamp) (#881-888)
Ensure that all the return values of the function calls are used.

Additional information: link

token.allowance(address,address).owner (#872) shadows:
- Ownable.owner() (#411-413) (function)
token._approve(address,address,uint256).owner (#1127) shadows:
- Ownable.owner() (#411-413) (function)
Rename the local variables that shadow another component.

Additional information: link

token.setTaxFeePercent(uint256) (#985-987) should emit an event for:
- _taxFee = taxFee (#986)
token.setLiquidityFeePercent(uint256) (#989-991) should emit an event for:
- _liquidityFee = liquidityFee (#990)
token.setBurnFeePercent(uint256) (#993-995) should emit an event for:
- _burnFee = burnFee (#994)
token.setDevFeePercent(uint256) (#997-999) should emit an event for:
- _devFee = devFee (#998)
token.setMaxTxPercent(uint256) (#1001-1003) should emit an event for:
- _maxTxAmount = maxTxPercent (#1002)
Emit an event for critical parameter changes.

Additional information: link

Reentrancy in token._transfer(address,address,uint256) (#1135-1176):
External calls:
- swapAndLiquify(contractTokenBalance) (#1163)
- uniswapV2Router.addLiquidityETH{value: ethAmount}(address(this),tokenAmount,0,0,address(this),block.timestamp) (#881-888)
- uniswapV2Router.swapExactTokensForETHSupportingFeeOnTransferTokens(tokenAmount,0,path,address(this),block.timestamp) (#1215-1221)
- uniswapV2Router.swapExactTokensForTokensSupportingFeeOnTransferTokens(tokenAmount,0,path,address(this),block.timestamp) (#1234-1240)
- IERC20(husdtToken).transfer(address(devAddress),dividends) (#1242)
External calls sending eth:
- swapAndLiquify(contractTokenBalance) (#1163)
- uniswapV2Router.addLiquidityETH{value: ethAmount}(address(this),tokenAmount,0,0,address(this),block.timestamp) (#881-888)
State variables written after the call(s):
- _tokenTransfer(from,to,amount,takeFee) (#1175)
- _burnFee = _previousBurnFee (#1119)
- _burnFee = 0 (#1112)
- _tokenTransfer(from,to,amount,takeFee) (#1175)
- _previousBurnFee = _burnFee (#1107)
- _tokenTransfer(from,to,amount,takeFee) (#1175)
- _previousDevFee = _devFee (#1108)
- _tokenTransfer(from,to,amount,takeFee) (#1175)
- _previousLiquidityFee = _liquidityFee (#1106)
- _tokenTransfer(from,to,amount,takeFee) (#1175)
- _previousTaxFee = _taxFee (#1105)
- _tokenTransfer(from,to,amount,takeFee) (#1175)
- _tFeeTotal = _tFeeTotal.add(tFee) (#1020)
- _tokenTransfer(from,to,amount,takeFee) (#1175)
- _taxFee = _previousTaxFee (#1117)
- _taxFee = 0 (#1110)
Reentrancy in token.constructor() (#827-845):
External calls:
- uniswapV2Pair = IUniswapV2Factory(_uniswapV2Router.factory()).createPair(address(this),_uniswapV2Router.WETH()) (#832-833)
State variables written after the call(s):
- _isExcludedFromFee[owner()] = true (#839)
- _isExcludedFromFee[ownerAddres] = true (#840)
- _isExcludedFromFee[burnAddress] = true (#841)
- _isExcludedFromFee[address(this)] = true (#842)
- uniswapV2Router = _uniswapV2Router (#836)
Reentrancy in token.swapAndLiquify(uint256) (#1178-1203):
External calls:
- swapTokensForEth(half) (#1192)
- uniswapV2Router.swapExactTokensForETHSupportingFeeOnTransferTokens(tokenAmount,0,path,address(this),block.timestamp) (#1215-1221)
- addLiquidity(otherHalf,newBalance) (#1198)
- uniswapV2Router.addLiquidityETH{value: ethAmount}(address(this),tokenAmount,0,0,address(this),block.timestamp) (#881-888)
External calls sending eth:
- addLiquidity(otherHalf,newBalance) (#1198)
- uniswapV2Router.addLiquidityETH{value: ethAmount}(address(this),tokenAmount,0,0,address(this),block.timestamp) (#881-888)
State variables written after the call(s):
- addLiquidity(otherHalf,newBalance) (#1198)
- _allowances[owner][spender] = amount (#1131)
Reentrancy in token.swapAndLiquify(uint256) (#1178-1203):
External calls:
- swapTokensForEth(half) (#1192)
- uniswapV2Router.swapExactTokensForETHSupportingFeeOnTransferTokens(tokenAmount,0,path,address(this),block.timestamp) (#1215-1221)
- addLiquidity(otherHalf,newBalance) (#1198)
- uniswapV2Router.addLiquidityETH{value: ethAmount}(address(this),tokenAmount,0,0,address(this),block.timestamp) (#881-888)
- swapTokensForDividendToken(devNumber) (#1200)
- uniswapV2Router.swapExactTokensForTokensSupportingFeeOnTransferTokens(tokenAmount,0,path,address(this),block.timestamp) (#1234-1240)
- IERC20(husdtToken).transfer(address(devAddress),dividends) (#1242)
External calls sending eth:
- addLiquidity(otherHalf,newBalance) (#1198)
- uniswapV2Router.addLiquidityETH{value: ethAmount}(address(this),tokenAmount,0,0,address(this),block.timestamp) (#881-888)
State variables written after the call(s):
- swapTokensForDividendToken(devNumber) (#1200)
- _allowances[owner][spender] = amount (#1131)
Reentrancy in token.transferFrom(address,address,uint256) (#919-923):
External calls:
- _transfer(sender,recipient,amount) (#920)
- uniswapV2Router.addLiquidityETH{value: ethAmount}(address(this),tokenAmount,0,0,address(this),block.timestamp) (#881-888)
- uniswapV2Router.swapExactTokensForETHSupportingFeeOnTransferTokens(tokenAmount,0,path,address(this),block.timestamp) (#1215-1221)
- uniswapV2Router.swapExactTokensForTokensSupportingFeeOnTransferTokens(tokenAmount,0,path,address(this),block.timestamp) (#1234-1240)
- IERC20(husdtToken).transfer(address(devAddress),dividends) (#1242)
External calls sending eth:
- _transfer(sender,recipient,amount) (#920)
- uniswapV2Router.addLiquidityETH{value: ethAmount}(address(this),tokenAmount,0,0,address(this),block.timestamp) (#881-888)
State variables written after the call(s):
- _approve(sender,_msgSender(),_allowances[sender][_msgSender()].sub(amount,ERC20: transfer amount exceeds allowance)) (#921)
- _allowances[owner][spender] = amount (#1131)
Apply the check-effects-interactions pattern.

Additional information: link

Reentrancy in token._transfer(address,address,uint256) (#1135-1176):
External calls:
- swapAndLiquify(contractTokenBalance) (#1163)
- uniswapV2Router.addLiquidityETH{value: ethAmount}(address(this),tokenAmount,0,0,address(this),block.timestamp) (#881-888)
- uniswapV2Router.swapExactTokensForETHSupportingFeeOnTransferTokens(tokenAmount,0,path,address(this),block.timestamp) (#1215-1221)
- uniswapV2Router.swapExactTokensForTokensSupportingFeeOnTransferTokens(tokenAmount,0,path,address(this),block.timestamp) (#1234-1240)
- IERC20(husdtToken).transfer(address(devAddress),dividends) (#1242)
External calls sending eth:
- swapAndLiquify(contractTokenBalance) (#1163)
- uniswapV2Router.addLiquidityETH{value: ethAmount}(address(this),tokenAmount,0,0,address(this),block.timestamp) (#881-888)
Event emitted after the call(s):
- Transfer(sender,burnAddress,tBurn) (#962)
- _tokenTransfer(from,to,amount,takeFee) (#1175)
- Transfer(sender,recipient,tTransferAmount) (#911)
- _tokenTransfer(from,to,amount,takeFee) (#1175)
Reentrancy in token.constructor() (#827-845):
External calls:
- uniswapV2Pair = IUniswapV2Factory(_uniswapV2Router.factory()).createPair(address(this),_uniswapV2Router.WETH()) (#832-833)
Event emitted after the call(s):
- Transfer(address(0),ownerAddres,_tTotal) (#844)
Reentrancy in token.swapAndLiquify(uint256) (#1178-1203):
External calls:
- swapTokensForEth(half) (#1192)
- uniswapV2Router.swapExactTokensForETHSupportingFeeOnTransferTokens(tokenAmount,0,path,address(this),block.timestamp) (#1215-1221)
- addLiquidity(otherHalf,newBalance) (#1198)
- uniswapV2Router.addLiquidityETH{value: ethAmount}(address(this),tokenAmount,0,0,address(this),block.timestamp) (#881-888)
External calls sending eth:
- addLiquidity(otherHalf,newBalance) (#1198)
- uniswapV2Router.addLiquidityETH{value: ethAmount}(address(this),tokenAmount,0,0,address(this),block.timestamp) (#881-888)
Event emitted after the call(s):
- Approval(owner,spender,amount) (#1132)
- addLiquidity(otherHalf,newBalance) (#1198)
Reentrancy in token.swapAndLiquify(uint256) (#1178-1203):
External calls:
- swapTokensForEth(half) (#1192)
- uniswapV2Router.swapExactTokensForETHSupportingFeeOnTransferTokens(tokenAmount,0,path,address(this),block.timestamp) (#1215-1221)
- addLiquidity(otherHalf,newBalance) (#1198)
- uniswapV2Router.addLiquidityETH{value: ethAmount}(address(this),tokenAmount,0,0,address(this),block.timestamp) (#881-888)
- swapTokensForDividendToken(devNumber) (#1200)
- uniswapV2Router.swapExactTokensForTokensSupportingFeeOnTransferTokens(tokenAmount,0,path,address(this),block.timestamp) (#1234-1240)
- IERC20(husdtToken).transfer(address(devAddress),dividends) (#1242)
External calls sending eth:
- addLiquidity(otherHalf,newBalance) (#1198)
- uniswapV2Router.addLiquidityETH{value: ethAmount}(address(this),tokenAmount,0,0,address(this),block.timestamp) (#881-888)
Event emitted after the call(s):
- Approval(owner,spender,amount) (#1132)
- swapTokensForDividendToken(devNumber) (#1200)
- SwapAndLiquify(half,newBalance,otherHalf) (#1202)
Reentrancy in token.transferFrom(address,address,uint256) (#919-923):
External calls:
- _transfer(sender,recipient,amount) (#920)
- uniswapV2Router.addLiquidityETH{value: ethAmount}(address(this),tokenAmount,0,0,address(this),block.timestamp) (#881-888)
- uniswapV2Router.swapExactTokensForETHSupportingFeeOnTransferTokens(tokenAmount,0,path,address(this),block.timestamp) (#1215-1221)
- uniswapV2Router.swapExactTokensForTokensSupportingFeeOnTransferTokens(tokenAmount,0,path,address(this),block.timestamp) (#1234-1240)
- IERC20(husdtToken).transfer(address(devAddress),dividends) (#1242)
External calls sending eth:
- _transfer(sender,recipient,amount) (#920)
- uniswapV2Router.addLiquidityETH{value: ethAmount}(address(this),tokenAmount,0,0,address(this),block.timestamp) (#881-888)
Event emitted after the call(s):
- Approval(owner,spender,amount) (#1132)
- _approve(sender,_msgSender(),_allowances[sender][_msgSender()].sub(amount,ERC20: transfer amount exceeds allowance)) (#921)
Apply the check-effects-interactions pattern.

Additional information: link

Ownable.unlock() (#458-463) uses timestamp for comparisons
Dangerous comparisons:
- require(bool,string)(now > _lockTime,Contract is locked until 7 days) (#460)
Avoid relying on block.timestamp.

Additional information: link

Address.isContract(address) (#263-272) uses assembly
- INLINE ASM (#270)
Address._functionCallWithValue(address,bytes,uint256,string) (#356-377) uses assembly
- INLINE ASM (#369-372)
Do not use evm assembly.

Additional information: link

Different versions of Solidity is used:
- Version used: ['>=0.5.0', '^0.6.12']
- ^0.6.12 (#18)
- >=0.5.0 (#659)
- >=0.5.0 (#678)
Use one Solidity version.

Additional information: link

Address._functionCallWithValue(address,bytes,uint256,string) (#356-377) is never used and should be removed
Address.functionCall(address,bytes) (#316-318) is never used and should be removed
Address.functionCall(address,bytes,string) (#326-328) is never used and should be removed
Address.functionCallWithValue(address,bytes,uint256) (#341-343) is never used and should be removed
Address.functionCallWithValue(address,bytes,uint256,string) (#351-354) is never used and should be removed
Address.isContract(address) (#263-272) is never used and should be removed
Address.sendValue(address,uint256) (#290-296) is never used and should be removed
Context._msgData() (#235-238) is never used and should be removed
PancakeLibrary.getAmountIn(uint256,uint256,uint256) (#729-735) is never used and should be removed
PancakeLibrary.getAmountOut(uint256,uint256,uint256) (#719-726) is never used and should be removed
PancakeLibrary.getAmountsIn(address,uint256,address[]) (#749-757) is never used and should be removed
PancakeLibrary.getAmountsOut(address,uint256,address[]) (#738-746) is never used and should be removed
PancakeLibrary.getReserves(address,address,address) (#704-709) is never used and should be removed
PancakeLibrary.pairFor(address,address,address) (#693-701) is never used and should be removed
PancakeLibrary.quote(uint256,uint256,uint256) (#712-716) is never used and should be removed
PancakeLibrary.sortTokens(address,address) (#686-690) is never used and should be removed
SafeMath.mod(uint256,uint256) (#141-143) is never used and should be removed
SafeMath.mod(uint256,uint256,string) (#157-160) is never used and should be removed
Remove unused functions.

Additional information: link

token._rTotal (#777) is set pre-construction with a non-constant function or state variable:
- (MAX - (MAX % _tTotal))
token._previousTaxFee (#785) is set pre-construction with a non-constant function or state variable:
- _taxFee
token._previousLiquidityFee (#788) is set pre-construction with a non-constant function or state variable:
- _liquidityFee
token._previousBurnFee (#791) is set pre-construction with a non-constant function or state variable:
- _burnFee
token._previousDevFee (#794) is set pre-construction with a non-constant function or state variable:
- _devFee
Remove any initialization of state variables via non-constant state variables or function calls. If variables must be set upon contract deployment, locate initialization in the constructor instead.

Additional information: link

Pragma version>=0.5.0 (#659) allows old versions
Pragma version>=0.5.0 (#678) allows old versions
Deploy with any of the following Solidity versions: 0.5.16 - 0.5.17, 0.6.11 - 0.6.12, 0.7.5 - 0.7.6 Use a simple pragma version that allows any of these versions. Consider using the latest version of Solidity for testing.

Additional information: link

Low level call in Address.sendValue(address,uint256) (#290-296):
- (success) = recipient.call{value: amount}() (#294)
Low level call in Address._functionCallWithValue(address,bytes,uint256,string) (#356-377):
- (success,returndata) = target.call{value: weiValue}(data) (#360)
Avoid low-level calls. Check the call success. If the call is meant for a contract, check for code existence

Additional information: link

Function IPancakeRouter01.WETH() (#470) is not in mixedCase
Function IPancakePair.DOMAIN_SEPARATOR() (#623) is not in mixedCase
Function IPancakePair.PERMIT_TYPEHASH() (#624) is not in mixedCase
Function IPancakePair.MINIMUM_LIQUIDITY() (#641) is not in mixedCase
Contract token (#765-1246) is not in CapWords
Parameter token.setSwapAndLiquifyEnabled(bool)._enabled (#1005) is not in mixedCase
Parameter token.setSwapDevEnabled(bool)._enabled (#1010) is not in mixedCase
Parameter token.calculateTaxFee(uint256)._amount (#1077) is not in mixedCase
Parameter token.calculateLiquidityFee(uint256)._amount (#1083) is not in mixedCase
Parameter token.calculateBurnFee(uint256)._amount (#1089) is not in mixedCase
Parameter token.calculateDevFee(uint256)._amount (#1095) is not in mixedCase
Variable token._taxFee (#784) is not in mixedCase
Variable token._liquidityFee (#787) is not in mixedCase
Variable token._burnFee (#790) is not in mixedCase
Variable token._devFee (#793) is not in mixedCase
Variable token._maxTxAmount (#810) is not in mixedCase
Follow the Solidity naming convention.

Additional information: link

Redundant expression "this (#236)" inContext (#230-239)
Remove redundant statements if they congest code but offer no value.

Additional information: link

Variable IPancakeRouter01.addLiquidity(address,address,uint256,uint256,uint256,uint256,address,uint256).amountADesired (#475) is too similar to IPancakeRouter01.addLiquidity(address,address,uint256,uint256,uint256,uint256,address,uint256).amountBDesired (#476)
Variable token._transferStandard(address,address,uint256).rTransferAmount (#903) is too similar to token._transferStandard(address,address,uint256).tTransferAmount (#903)
Variable token._getValues(uint256).rTransferAmount (#1034) is too similar to token._getTValues(uint256).tTransferAmount (#1043)
Variable token._getValues(uint256).rTransferAmount (#1034) is too similar to token._transferStandard(address,address,uint256).tTransferAmount (#903)
Variable token._transferStandard(address,address,uint256).rTransferAmount (#903) is too similar to token._getTValues(uint256).tTransferAmount (#1043)
Variable token._transferStandard(address,address,uint256).rTransferAmount (#903) is too similar to token._getValues(uint256).tTransferAmount (#1032)
Variable token._getRValues(token.TData,uint256).rTransferAmount (#1054) is too similar to token._getTValues(uint256).tTransferAmount (#1043)
Variable token._getRValues(token.TData,uint256).rTransferAmount (#1054) is too similar to token._transferStandard(address,address,uint256).tTransferAmount (#903)
Variable token._getValues(uint256).rTransferAmount (#1034) is too similar to token._getValues(uint256).tTransferAmount (#1032)
Variable token.reflectionFromToken(uint256,bool).rTransferAmount (#946) is too similar to token._getTValues(uint256).tTransferAmount (#1043)
Variable token._getRValues(token.TData,uint256).rTransferAmount (#1054) is too similar to token._getValues(uint256).tTransferAmount (#1032)
Variable token.reflectionFromToken(uint256,bool).rTransferAmount (#946) is too similar to token._transferStandard(address,address,uint256).tTransferAmount (#903)
Variable token.reflectionFromToken(uint256,bool).rTransferAmount (#946) is too similar to token._getValues(uint256).tTransferAmount (#1032)
Prevent variables from having similar names.

Additional information: link

token.slitherConstructorVariables() (#765-1246) uses literals with too many digits:
- _tTotal = 2000000 * 10 ** 18 (#776)
token.slitherConstructorVariables() (#765-1246) uses literals with too many digits:
- burnAddress = address(0x000000000000000000000000000000000000dEaD) (#796)
token.slitherConstructorVariables() (#765-1246) uses literals with too many digits:
- _maxTxAmount = 2000000 * 10 ** 18 (#810)
token.slitherConstructorVariables() (#765-1246) uses literals with too many digits:
- numTokensSellToAddToLiquidity = 2000000 * 10 ** 18 (#811)
Use: Ether suffix, Time suffix, or The scientific notation

Additional information: link

token._tOwned (#770) is never used in token (#765-1246)
Remove unused state variables.

Additional information: link

token._decimals (#782) should be constant
token._name (#780) should be constant
token._symbol (#781) should be constant
token._tTotal (#776) should be constant
token.burnAddress (#796) should be constant
token.devAddress (#798) should be constant
token.hbtcToken (#800) should be constant
token.husdtToken (#801) should be constant
token.numTokensSellToAddToLiquidity (#811) should be constant
token.ownerAddres (#797) should be constant
Add the constant attributes to state variables that never change.

Additional information: link

renounceOwnership() should be declared external:
- Ownable.renounceOwnership() (#430-433)
transferOwnership(address) should be declared external:
- Ownable.transferOwnership(address) (#439-443)
geUnlockTime() should be declared external:
- Ownable.geUnlockTime() (#445-447)
lock(uint256) should be declared external:
- Ownable.lock(uint256) (#450-455)
unlock() should be declared external:
- Ownable.unlock() (#458-463)
name() should be declared external:
- token.name() (#847-849)
symbol() should be declared external:
- token.symbol() (#851-853)
decimals() should be declared external:
- token.decimals() (#855-857)
totalSupply() should be declared external:
- token.totalSupply() (#859-861)
transfer(address,uint256) should be declared external:
- token.transfer(address,uint256) (#867-870)
allowance(address,address) should be declared external:
- token.allowance(address,address) (#872-874)
approve(address,uint256) should be declared external:
- token.approve(address,uint256) (#914-917)
transferFrom(address,address,uint256) should be declared external:
- token.transferFrom(address,address,uint256) (#919-923)
increaseAllowance(address,uint256) should be declared external:
- token.increaseAllowance(address,uint256) (#925-928)
decreaseAllowance(address,uint256) should be declared external:
- token.decreaseAllowance(address,uint256) (#930-933)
totalFees() should be declared external:
- token.totalFees() (#936-938)
reflectionFromToken(uint256,bool) should be declared external:
- token.reflectionFromToken(uint256,bool) (#940-949)
excludeFromFee(address) should be declared external:
- token.excludeFromFee(address) (#977-979)
includeInFee(address) should be declared external:
- token.includeInFee(address) (#981-983)
setSwapAndLiquifyEnabled(bool) should be declared external:
- token.setSwapAndLiquifyEnabled(bool) (#1005-1008)
setSwapDevEnabled(bool) should be declared external:
- token.setSwapDevEnabled(bool) (#1010-1012)
isExcludedFromFee(address) should be declared external:
- token.isExcludedFromFee(address) (#1123-1125)
Use the external attribute for functions never called from the contract.

Additional information: link

Contract has 2% buy tax and 2% sell tax.
Taxes are low but contract ownership is not renounced. Token has a high risk of becoming a honeypot.

Token is deployed only at one blockchain

Average 30d PancakeSwap liquidity is low.

BscScan page for the token does not contain additional info: website, socials, description, etc.

Additional information: link

Unable to find token on CoinGecko

Additional information: link

Unable to find token on CoinMarketCap

Additional information: link

Unable to find token contract audit

Unable to find audit link on the website

Unable to find token on CoinHunt

Additional information: link

Unable to find code repository for the project

Young tokens have high risks of scam / price dump / death

Young tokens have high risks of scam / price dump / death

Young tokens have high risks of scam / price dump / death

Token has no active CoinGecko listing / rank

Token has no active CoinMarketCap listing / rank