AgrocashX Token Logo

xAGC [AgrocashX] Token

About xAGC

Listings

Token 12 months

AgroCash X is a decentralized currency, subject only to its respective demand.

With the development of technologies in the agricultural sector in full swing, the financial movement of the sector could not be different, AgroCash X will bring solutions to problems that society has faced several times throughout its history, such as inflation, economic cycles and the shortage universal access to financial services for the entire population.

It also intends to solve the problem that has most affected producers in emerging countries, the issue of exchange rate fluctuation.

AgroCash X then emerges as a solution for the sector responsible for much of the success of the economic indices of the main world economies.

Social

Laser Scorebeta Last Audit: 30 November 2021

report
Token is either risky or in presale. For presale 30+ is a fine score.

Anti-Scam

Links


Unable to find manual contract audit (e.g. Certik, PeckShield, Solidity...)

xAGC.addLiquidity(uint256,uint256) (#1076-1089) sends eth to arbitrary user
Dangerous calls:
- uniswapV2Router.addLiquidityETH{value: ethAmount}(address(this),tokenAmount,0,0,owner(),block.timestamp) (#1081-1088)
Ensure that an arbitrary user cannot withdraw unauthorized funds.

Additional information: link

Reentrancy in xAGC._transfer(address,address,uint256) (#989-1033):
External calls:
- swapAndLiquify(contractTokenBalance) (#1020)
- uniswapV2Router.addLiquidityETH{value: ethAmount}(address(this),tokenAmount,0,0,owner(),block.timestamp) (#1081-1088)
- uniswapV2Router.swapExactTokensForETHSupportingFeeOnTransferTokens(tokenAmount,0,path,address(this),block.timestamp) (#1067-1073)
External calls sending eth:
- swapAndLiquify(contractTokenBalance) (#1020)
- uniswapV2Router.addLiquidityETH{value: ethAmount}(address(this),tokenAmount,0,0,owner(),block.timestamp) (#1081-1088)
State variables written after the call(s):
- _tokenTransfer(from,to,amount,takeFee) (#1032)
- _rOwned[address(this)] = _rOwned[address(this)].add(rLiquidity) (#945)
- _rOwned[sender] = _rOwned[sender].sub(rAmount) (#1114)
- _rOwned[sender] = _rOwned[sender].sub(rAmount) (#1123)
- _rOwned[sender] = _rOwned[sender].sub(rAmount) (#1134)
- _rOwned[sender] = _rOwned[sender].sub(rAmount) (#861)
- _rOwned[recipient] = _rOwned[recipient].add(rTransferAmount) (#1115)
- _rOwned[recipient] = _rOwned[recipient].add(rTransferAmount) (#1125)
- _rOwned[recipient] = _rOwned[recipient].add(rTransferAmount) (#1135)
- _rOwned[recipient] = _rOwned[recipient].add(rTransferAmount) (#863)
- _tokenTransfer(from,to,amount,takeFee) (#1032)
- _rTotal = _rTotal.sub(rFee) (#900)
- _tokenTransfer(from,to,amount,takeFee) (#1032)
- _tOwned[address(this)] = _tOwned[address(this)].add(tLiquidity) (#947)
- _tOwned[sender] = _tOwned[sender].sub(tAmount) (#860)
- _tOwned[sender] = _tOwned[sender].sub(tAmount) (#1133)
- _tOwned[recipient] = _tOwned[recipient].add(tTransferAmount) (#1124)
- _tOwned[recipient] = _tOwned[recipient].add(tTransferAmount) (#862)
Apply the check-effects-interactions pattern.

Additional information: link


Combination 1: Reentrancy vulnerabilities + Functions that send Ether to arbitraty destination. Usual for scams. May be justified by some complex mechanics (e.g. rebase, reflections). DYOR & manual audit are advised.

xAGC.addLiquidity(uint256,uint256) (#1076-1089) ignores return value by uniswapV2Router.addLiquidityETH{value: ethAmount}(address(this),tokenAmount,0,0,owner(),block.timestamp) (#1081-1088)
Ensure that all the return values of the function calls are used.

Additional information: link

xAGC._approve(address,address,uint256).owner (#981) shadows:
- Ownable.owner() (#415-417) (function)
Rename the local variables that shadow another component.

Additional information: link

xAGC.setMaxTxPercent(uint256) (#885-889) should emit an event for:
- _maxTxAmount = _tTotal.mul(maxTxPercent).div(10 ** 2) (#886-888)
Emit an event for critical parameter changes.

Additional information: link

Reentrancy in xAGC.transferFrom(address,address,uint256) (#785-789):
External calls:
- _transfer(sender,recipient,amount) (#786)
- uniswapV2Router.addLiquidityETH{value: ethAmount}(address(this),tokenAmount,0,0,owner(),block.timestamp) (#1081-1088)
- uniswapV2Router.swapExactTokensForETHSupportingFeeOnTransferTokens(tokenAmount,0,path,address(this),block.timestamp) (#1067-1073)
External calls sending eth:
- _transfer(sender,recipient,amount) (#786)
- uniswapV2Router.addLiquidityETH{value: ethAmount}(address(this),tokenAmount,0,0,owner(),block.timestamp) (#1081-1088)
State variables written after the call(s):
- _approve(sender,_msgSender(),_allowances[sender][_msgSender()].sub(amount,ERC20: transfer amount exceeds allowance)) (#787)
- _allowances[owner][spender] = amount (#985)
Apply the check-effects-interactions pattern.

Additional information: link

Reentrancy in xAGC.transferFrom(address,address,uint256) (#785-789):
External calls:
- _transfer(sender,recipient,amount) (#786)
- uniswapV2Router.addLiquidityETH{value: ethAmount}(address(this),tokenAmount,0,0,owner(),block.timestamp) (#1081-1088)
- uniswapV2Router.swapExactTokensForETHSupportingFeeOnTransferTokens(tokenAmount,0,path,address(this),block.timestamp) (#1067-1073)
External calls sending eth:
- _transfer(sender,recipient,amount) (#786)
- uniswapV2Router.addLiquidityETH{value: ethAmount}(address(this),tokenAmount,0,0,owner(),block.timestamp) (#1081-1088)
Event emitted after the call(s):
- Approval(owner,spender,amount) (#986)
- _approve(sender,_msgSender(),_allowances[sender][_msgSender()].sub(amount,ERC20: transfer amount exceeds allowance)) (#787)
Apply the check-effects-interactions pattern.

Additional information: link

Ownable.unlock() (#462-467) uses timestamp for comparisons
Dangerous comparisons:
- require(bool,string)(now > _lockTime,Contract is locked until 7 days) (#464)
Avoid relying on block.timestamp.

Additional information: link

Address._functionCallWithValue(address,bytes,uint256,string) (#360-381) uses assembly
- INLINE ASM (#373-376)
Do not use evm assembly.

Additional information: link

SafeMath.mod(uint256,uint256,string) (#228-231) is never used and should be removed
Remove unused functions.

Additional information: link

xAGC._previousLiquidityFee (#707) is set pre-construction with a non-constant function or state variable:
- _liquidityFee
Remove any initialization of state variables via non-constant state variables or function calls. If variables must be set upon contract deployment, locate initialization in the constructor instead.

Additional information: link

Low level call in Address._functionCallWithValue(address,bytes,uint256,string) (#360-381):
- (success,returndata) = target.call{value: weiValue}(data) (#364)
Avoid low-level calls. Check the call success. If the call is meant for a contract, check for code existence

Additional information: link

Variable xAGC._maxTxAmount (#715) is not in mixedCase
Follow the Solidity naming convention.

Additional information: link

Redundant expression "this (#240)" inContext (#234-243)
Remove redundant statements if they congest code but offer no value.

Additional information: link

Variable xAGC._transferToExcluded(address,address,uint256).rTransferAmount (#1122) is too similar to xAGC._getTValues(uint256).tTransferAmount (#913)
Prevent variables from having similar names.

Additional information: link

xAGC.slitherConstructorVariables() (#681-1151) uses literals with too many digits:
- _maxTxAmount = 1000000000 * 10 ** 9 (#715)
Use: Ether suffix, Time suffix, or The scientific notation

Additional information: link

xAGC.numTokensSellToAddToLiquidity (#716) should be constant
Add the constant attributes to state variables that never change.

Additional information: link

setRouterAddress(address) should be declared external:
- xAGC.setRouterAddress(address) (#1142-1147)
Use the external attribute for functions never called from the contract.

Additional information: link

Holders:


Average PancakeSwap trading volume, liqudity, number of swaps are extremely low. Token seems to be dead.


Token is deployed only at one blockchain


Token has only one trading pair


Unable to find PancakeSwap trading pair to compute liquidity.


Unable to find PancakeSwap trading pair to compute volume.


Unable to find PancakeSwap trading pair to compute number of swaps.


Twitter account link seems to be invalid


Unable to find Blog account (Reddit or Medium)


Unable to find Youtube account


Unable to find Discord account


BscScan page for the token does not contain additional info: website, socials, description, etc.

Additional information: link


Unable to find token on CoinMarketCap

Additional information: link


Unable to find token/project description on the website or on BscScan, CoinMarketCap


Unable to find token contract audit


Unable to find audit link on the website


Unable to find whitepaper link on the website


Unable to find token on CoinHunt

Additional information: link


Unable to find code repository for the project


Young tokens have high risks of scam / price dump / death


Young tokens have high risks of scam / price dump / death


Token has no active CoinMarketCap listing / rank


Token has a considerable age, but social accounts / website are missing or have few users


Token has a considerable age, but average PancakeSwap 30d trading volume is low


Young tokens have high risks of price dump / death


Token has relatively low CoinGecko rank

Price for xAGC