$VUSD [VUSD] Token

Unable to find manual contract audit (e.g. Certik, PeckShield, Solidity...)

LiquidityGeneratorToken.addLiquidity(uint256,uint256) (#1532-1545) sends eth to arbitrary user
Dangerous calls:
- uniswapV2Router.addLiquidityETH{value: ethAmount}(address(this),tokenAmount,0,0,owner(),block.timestamp) (#1537-1544)
Ensure that an arbitrary user cannot withdraw unauthorized funds.

Additional information: link

Reentrancy in LiquidityGeneratorToken._transfer(address,address,uint256) (#1451-1489):
External calls:
- swapAndLiquify(contractTokenBalance) (#1476)
- uniswapV2Router.addLiquidityETH{value: ethAmount}(address(this),tokenAmount,0,0,owner(),block.timestamp) (#1537-1544)
- uniswapV2Router.swapExactTokensForETHSupportingFeeOnTransferTokens(tokenAmount,0,path,address(this),block.timestamp) (#1523-1529)
External calls sending eth:
- swapAndLiquify(contractTokenBalance) (#1476)
- uniswapV2Router.addLiquidityETH{value: ethAmount}(address(this),tokenAmount,0,0,owner(),block.timestamp) (#1537-1544)
State variables written after the call(s):
- _tokenTransfer(from,to,amount,takeFee) (#1488)
- _rOwned[address(this)] = _rOwned[address(this)].add(rLiquidity) (#1378)
- _rOwned[_charityAddress] = _rOwned[_charityAddress].add(rCharity) (#1387)
- _rOwned[sender] = _rOwned[sender].sub(rAmount) (#1585)
- _rOwned[sender] = _rOwned[sender].sub(rAmount) (#1607)
- _rOwned[sender] = _rOwned[sender].sub(rAmount) (#1631)
- _rOwned[recipient] = _rOwned[recipient].add(rTransferAmount) (#1586)
- _rOwned[sender] = _rOwned[sender].sub(rAmount) (#1225)
- _rOwned[recipient] = _rOwned[recipient].add(rTransferAmount) (#1632)
- _rOwned[recipient] = _rOwned[recipient].add(rTransferAmount) (#1609)
- _rOwned[recipient] = _rOwned[recipient].add(rTransferAmount) (#1227)
- _tokenTransfer(from,to,amount,takeFee) (#1488)
- _rTotal = _rTotal.sub(rFee) (#1270)
- _tokenTransfer(from,to,amount,takeFee) (#1488)
- _tOwned[address(this)] = _tOwned[address(this)].add(tLiquidity) (#1380)
- _tOwned[_charityAddress] = _tOwned[_charityAddress].add(tCharity) (#1389-1391)
- _tOwned[sender] = _tOwned[sender].sub(tAmount) (#1630)
- _tOwned[sender] = _tOwned[sender].sub(tAmount) (#1224)
- _tOwned[recipient] = _tOwned[recipient].add(tTransferAmount) (#1608)
- _tOwned[recipient] = _tOwned[recipient].add(tTransferAmount) (#1226)
Apply the check-effects-interactions pattern.

Additional information: link

LiquidityGeneratorToken.constructor(string,string,uint256,address,address,uint16,uint16,uint16,address,uint256) (#972-1043) contains a tautology or contradiction:
- require(bool,string)(liquidityFeeBps_ >= 0,Invalid liquidity fee) (#985)
LiquidityGeneratorToken.constructor(string,string,uint256,address,address,uint16,uint16,uint16,address,uint256) (#972-1043) contains a tautology or contradiction:
- require(bool,string)(charityFeeBps_ >= 0,Invalid charity fee) (#986)
LiquidityGeneratorToken.constructor(string,string,uint256,address,address,uint16,uint16,uint16,address,uint256) (#972-1043) contains a tautology or contradiction:
- require(bool,string)(taxFeeBps_ >= 0,Invalid tax fee) (#984)
Fix the incorrect comparison by changing the value type or the comparison.

Additional information: link

Combination 1: Reentrancy vulnerabilities + Functions that send Ether to arbitraty destination. Usual for scams. May be justified by some complex mechanics (e.g. rebase, reflections). DYOR & manual audit are advised.

Contract ticker ($VUSD) contains non-alphanumeric characters.
Not a direct threat, but may indicate unreliable intentions of developer. Non-alphanumeric chars (,.;!#*&") are extremely rare among low risk tokens.

LiquidityGeneratorToken.addLiquidity(uint256,uint256) (#1532-1545) ignores return value by uniswapV2Router.addLiquidityETH{value: ethAmount}(address(this),tokenAmount,0,0,owner(),block.timestamp) (#1537-1544)
Ensure that all the return values of the function calls are used.

Additional information: link

LiquidityGeneratorToken.allowance(address,address).owner (#1075) shadows:
- Ownable.owner() (#146-148) (function)
LiquidityGeneratorToken._approve(address,address,uint256).owner (#1440) shadows:
- Ownable.owner() (#146-148) (function)
Rename the local variables that shadow another component.

Additional information: link

LiquidityGeneratorToken.setTaxFeePercent(uint256) (#1242-1248) should emit an event for:
- _taxFee = taxFeeBps (#1243)
LiquidityGeneratorToken.setLiquidityFeePercent(uint256) (#1250-1259) should emit an event for:
- _liquidityFee = liquidityFeeBps (#1254)
Emit an event for critical parameter changes.

Additional information: link

LiquidityGeneratorToken.constructor(string,string,uint256,address,address,uint16,uint16,uint16,address,uint256).serviceFeeReceiver_ (#981) lacks a zero-check on :
- address(serviceFeeReceiver_).transfer(serviceFee_) (#1042)
Check that the address is not zero.

Additional information: link

Reentrancy in LiquidityGeneratorToken._transfer(address,address,uint256) (#1451-1489):
External calls:
- swapAndLiquify(contractTokenBalance) (#1476)
- uniswapV2Router.addLiquidityETH{value: ethAmount}(address(this),tokenAmount,0,0,owner(),block.timestamp) (#1537-1544)
- uniswapV2Router.swapExactTokensForETHSupportingFeeOnTransferTokens(tokenAmount,0,path,address(this),block.timestamp) (#1523-1529)
External calls sending eth:
- swapAndLiquify(contractTokenBalance) (#1476)
- uniswapV2Router.addLiquidityETH{value: ethAmount}(address(this),tokenAmount,0,0,owner(),block.timestamp) (#1537-1544)
State variables written after the call(s):
- _tokenTransfer(from,to,amount,takeFee) (#1488)
- _charityFee = _previousCharityFee (#1432)
- _charityFee = 0 (#1426)
- _tokenTransfer(from,to,amount,takeFee) (#1488)
- _liquidityFee = _previousLiquidityFee (#1431)
- _liquidityFee = 0 (#1425)
- _tokenTransfer(from,to,amount,takeFee) (#1488)
- _previousCharityFee = _charityFee (#1422)
- _tokenTransfer(from,to,amount,takeFee) (#1488)
- _previousLiquidityFee = _liquidityFee (#1421)
- _tokenTransfer(from,to,amount,takeFee) (#1488)
- _previousTaxFee = _taxFee (#1420)
- _tokenTransfer(from,to,amount,takeFee) (#1488)
- _tFeeTotal = _tFeeTotal.add(tFee) (#1271)
- _tokenTransfer(from,to,amount,takeFee) (#1488)
- _taxFee = _previousTaxFee (#1430)
- _taxFee = 0 (#1424)
Reentrancy in LiquidityGeneratorToken.constructor(string,string,uint256,address,address,uint16,uint16,uint16,address,uint256) (#972-1043):
External calls:
- uniswapV2Pair = IUniswapV2Factory(_uniswapV2Router.factory()).createPair(address(this),_uniswapV2Router.WETH()) (#1023-1024)
State variables written after the call(s):
- _isExcludedFromFee[owner()] = true (#1030)
- _isExcludedFromFee[address(this)] = true (#1031)
- uniswapV2Router = _uniswapV2Router (#1027)
Reentrancy in LiquidityGeneratorToken.swapAndLiquify(uint256) (#1491-1512):
External calls:
- swapTokensForEth(half) (#1503)
- uniswapV2Router.swapExactTokensForETHSupportingFeeOnTransferTokens(tokenAmount,0,path,address(this),block.timestamp) (#1523-1529)
- addLiquidity(otherHalf,newBalance) (#1509)
- uniswapV2Router.addLiquidityETH{value: ethAmount}(address(this),tokenAmount,0,0,owner(),block.timestamp) (#1537-1544)
External calls sending eth:
- addLiquidity(otherHalf,newBalance) (#1509)
- uniswapV2Router.addLiquidityETH{value: ethAmount}(address(this),tokenAmount,0,0,owner(),block.timestamp) (#1537-1544)
State variables written after the call(s):
- addLiquidity(otherHalf,newBalance) (#1509)
- _allowances[owner][spender] = amount (#1447)
Reentrancy in LiquidityGeneratorToken.transferFrom(address,address,uint256) (#1093-1108):
External calls:
- _transfer(sender,recipient,amount) (#1098)
- uniswapV2Router.addLiquidityETH{value: ethAmount}(address(this),tokenAmount,0,0,owner(),block.timestamp) (#1537-1544)
- uniswapV2Router.swapExactTokensForETHSupportingFeeOnTransferTokens(tokenAmount,0,path,address(this),block.timestamp) (#1523-1529)
External calls sending eth:
- _transfer(sender,recipient,amount) (#1098)
- uniswapV2Router.addLiquidityETH{value: ethAmount}(address(this),tokenAmount,0,0,owner(),block.timestamp) (#1537-1544)
State variables written after the call(s):
- _approve(sender,_msgSender(),_allowances[sender][_msgSender()].sub(amount,ERC20: transfer amount exceeds allowance)) (#1099-1106)
- _allowances[owner][spender] = amount (#1447)
Apply the check-effects-interactions pattern.

Additional information: link

Reentrancy in LiquidityGeneratorToken._transfer(address,address,uint256) (#1451-1489):
External calls:
- swapAndLiquify(contractTokenBalance) (#1476)
- uniswapV2Router.addLiquidityETH{value: ethAmount}(address(this),tokenAmount,0,0,owner(),block.timestamp) (#1537-1544)
- uniswapV2Router.swapExactTokensForETHSupportingFeeOnTransferTokens(tokenAmount,0,path,address(this),block.timestamp) (#1523-1529)
External calls sending eth:
- swapAndLiquify(contractTokenBalance) (#1476)
- uniswapV2Router.addLiquidityETH{value: ethAmount}(address(this),tokenAmount,0,0,owner(),block.timestamp) (#1537-1544)
Event emitted after the call(s):
- Transfer(_msgSender(),_charityAddress,tCharity) (#1392)
- _tokenTransfer(from,to,amount,takeFee) (#1488)
- Transfer(sender,recipient,tTransferAmount) (#1590)
- _tokenTransfer(from,to,amount,takeFee) (#1488)
- Transfer(sender,recipient,tTransferAmount) (#1613)
- _tokenTransfer(from,to,amount,takeFee) (#1488)
- Transfer(sender,recipient,tTransferAmount) (#1636)
- _tokenTransfer(from,to,amount,takeFee) (#1488)
- Transfer(sender,recipient,tTransferAmount) (#1231)
- _tokenTransfer(from,to,amount,takeFee) (#1488)
Reentrancy in LiquidityGeneratorToken.constructor(string,string,uint256,address,address,uint16,uint16,uint16,address,uint256) (#972-1043):
External calls:
- uniswapV2Pair = IUniswapV2Factory(_uniswapV2Router.factory()).createPair(address(this),_uniswapV2Router.WETH()) (#1023-1024)
Event emitted after the call(s):
- TokenCreated(owner(),address(this),TokenType.liquidityGenerator,VERSION) (#1035-1040)
- Transfer(address(0),owner(),_tTotal) (#1033)
Reentrancy in LiquidityGeneratorToken.swapAndLiquify(uint256) (#1491-1512):
External calls:
- swapTokensForEth(half) (#1503)
- uniswapV2Router.swapExactTokensForETHSupportingFeeOnTransferTokens(tokenAmount,0,path,address(this),block.timestamp) (#1523-1529)
- addLiquidity(otherHalf,newBalance) (#1509)
- uniswapV2Router.addLiquidityETH{value: ethAmount}(address(this),tokenAmount,0,0,owner(),block.timestamp) (#1537-1544)
External calls sending eth:
- addLiquidity(otherHalf,newBalance) (#1509)
- uniswapV2Router.addLiquidityETH{value: ethAmount}(address(this),tokenAmount,0,0,owner(),block.timestamp) (#1537-1544)
Event emitted after the call(s):
- Approval(owner,spender,amount) (#1448)
- addLiquidity(otherHalf,newBalance) (#1509)
- SwapAndLiquify(half,newBalance,otherHalf) (#1511)
Reentrancy in LiquidityGeneratorToken.transferFrom(address,address,uint256) (#1093-1108):
External calls:
- _transfer(sender,recipient,amount) (#1098)
- uniswapV2Router.addLiquidityETH{value: ethAmount}(address(this),tokenAmount,0,0,owner(),block.timestamp) (#1537-1544)
- uniswapV2Router.swapExactTokensForETHSupportingFeeOnTransferTokens(tokenAmount,0,path,address(this),block.timestamp) (#1523-1529)
External calls sending eth:
- _transfer(sender,recipient,amount) (#1098)
- uniswapV2Router.addLiquidityETH{value: ethAmount}(address(this),tokenAmount,0,0,owner(),block.timestamp) (#1537-1544)
Event emitted after the call(s):
- Approval(owner,spender,amount) (#1448)
- _approve(sender,_msgSender(),_allowances[sender][_msgSender()].sub(amount,ERC20: transfer amount exceeds allowance)) (#1099-1106)
Apply the check-effects-interactions pattern.

Additional information: link

Address.isContract(address) (#441-451) uses assembly
- INLINE ASM (#447-449)
Address.verifyCallResult(bool,bytes,string) (#610-630) uses assembly
- INLINE ASM (#622-625)
Do not use evm assembly.

Additional information: link

LiquidityGeneratorToken.includeInReward(address) (#1197-1208) has costly operations inside a loop:
- _excluded.pop() (#1204)
Use a local variable to hold the loop computation result.

Additional information: link

Address.functionCall(address,bytes) (#494-496) is never used and should be removed
Address.functionCall(address,bytes,string) (#504-510) is never used and should be removed
Address.functionCallWithValue(address,bytes,uint256) (#523-529) is never used and should be removed
Address.functionCallWithValue(address,bytes,uint256,string) (#537-548) is never used and should be removed
Address.functionDelegateCall(address,bytes) (#583-585) is never used and should be removed
Address.functionDelegateCall(address,bytes,string) (#593-602) is never used and should be removed
Address.functionStaticCall(address,bytes) (#556-558) is never used and should be removed
Address.functionStaticCall(address,bytes,string) (#566-575) is never used and should be removed
Address.isContract(address) (#441-451) is never used and should be removed
Address.sendValue(address,uint256) (#469-474) is never used and should be removed
Address.verifyCallResult(bool,bytes,string) (#610-630) is never used and should be removed
Context._msgData() (#106-108) is never used and should be removed
SafeMath.div(uint256,uint256,string) (#376-385) is never used and should be removed
SafeMath.mod(uint256,uint256) (#336-338) is never used and should be removed
SafeMath.mod(uint256,uint256,string) (#402-411) is never used and should be removed
SafeMath.tryAdd(uint256,uint256) (#207-213) is never used and should be removed
SafeMath.tryDiv(uint256,uint256) (#249-254) is never used and should be removed
SafeMath.tryMod(uint256,uint256) (#261-266) is never used and should be removed
SafeMath.tryMul(uint256,uint256) (#232-242) is never used and should be removed
SafeMath.trySub(uint256,uint256) (#220-225) is never used and should be removed
Remove unused functions.

Additional information: link

LiquidityGeneratorToken._previousTaxFee (#941) is set pre-construction with a non-constant function or state variable:
- _taxFee
LiquidityGeneratorToken._previousLiquidityFee (#944) is set pre-construction with a non-constant function or state variable:
- _liquidityFee
LiquidityGeneratorToken._previousCharityFee (#947) is set pre-construction with a non-constant function or state variable:
- _charityFee
Remove any initialization of state variables via non-constant state variables or function calls. If variables must be set upon contract deployment, locate initialization in the constructor instead.

Additional information: link

Low level call in Address.sendValue(address,uint256) (#469-474):
- (success) = recipient.call{value: amount}() (#472)
Low level call in Address.functionCallWithValue(address,bytes,uint256,string) (#537-548):
- (success,returndata) = target.call{value: value}(data) (#546)
Low level call in Address.functionStaticCall(address,bytes,string) (#566-575):
- (success,returndata) = target.staticcall(data) (#573)
Low level call in Address.functionDelegateCall(address,bytes,string) (#593-602):
- (success,returndata) = target.delegatecall(data) (#600)
Avoid low-level calls. Check the call success. If the call is meant for a contract, check for code existence

Additional information: link

Function IUniswapV2Router01.WETH() (#641) is not in mixedCase
Parameter LiquidityGeneratorToken.setSwapAndLiquifyEnabled(bool)._enabled (#1261) is not in mixedCase
Parameter LiquidityGeneratorToken.calculateTaxFee(uint256)._amount (#1396) is not in mixedCase
Parameter LiquidityGeneratorToken.calculateLiquidityFee(uint256)._amount (#1400) is not in mixedCase
Parameter LiquidityGeneratorToken.calculateCharityFee(uint256)._amount (#1408) is not in mixedCase
Variable LiquidityGeneratorToken._taxFee (#940) is not in mixedCase
Variable LiquidityGeneratorToken._liquidityFee (#943) is not in mixedCase
Variable LiquidityGeneratorToken._charityFee (#946) is not in mixedCase
Variable LiquidityGeneratorToken._charityAddress (#951) is not in mixedCase
Follow the Solidity naming convention.

Additional information: link

Variable IUniswapV2Router01.addLiquidity(address,address,uint256,uint256,uint256,uint256,address,uint256).amountADesired (#646) is too similar to IUniswapV2Router01.addLiquidity(address,address,uint256,uint256,uint256,uint256,address,uint256).amountBDesired (#647)
Variable LiquidityGeneratorToken._charityAddress (#951) is too similar to LiquidityGeneratorToken.constructor(string,string,uint256,address,address,uint16,uint16,uint16,address,uint256).charityAddress_ (#977)
Variable LiquidityGeneratorToken._charityFee (#946) is too similar to LiquidityGeneratorToken._getTValues(uint256).tCharityFee (#1323)
Variable LiquidityGeneratorToken._getValues(uint256).rTransferAmount (#1293) is too similar to LiquidityGeneratorToken._getTValues(uint256).tTransferAmount (#1324-1326)
Variable LiquidityGeneratorToken._transferBothExcluded(address,address,uint256).rTransferAmount (#1217) is too similar to LiquidityGeneratorToken._getValues(uint256).tTransferAmount (#1288)
Variable LiquidityGeneratorToken.reflectionFromToken(uint256,bool).rTransferAmount (#1169) is too similar to LiquidityGeneratorToken._transferFromExcluded(address,address,uint256).tTransferAmount (#1625)
Variable LiquidityGeneratorToken.reflectionFromToken(uint256,bool).rTransferAmount (#1169) is too similar to LiquidityGeneratorToken._getTValues(uint256).tTransferAmount (#1324-1326)
Variable LiquidityGeneratorToken.reflectionFromToken(uint256,bool).rTransferAmount (#1169) is too similar to LiquidityGeneratorToken._transferBothExcluded(address,address,uint256).tTransferAmount (#1219)
Variable LiquidityGeneratorToken._transferToExcluded(address,address,uint256).rTransferAmount (#1600) is too similar to LiquidityGeneratorToken._transferStandard(address,address,uint256).tTransferAmount (#1580)
Variable LiquidityGeneratorToken._transferToExcluded(address,address,uint256).rTransferAmount (#1600) is too similar to LiquidityGeneratorToken._transferToExcluded(address,address,uint256).tTransferAmount (#1602)
Variable LiquidityGeneratorToken._transferToExcluded(address,address,uint256).rTransferAmount (#1600) is too similar to LiquidityGeneratorToken._getTValues(uint256).tTransferAmount (#1324-1326)
Variable LiquidityGeneratorToken._getRValues(uint256,uint256,uint256,uint256,uint256).rTransferAmount (#1349-1351) is too similar to LiquidityGeneratorToken._getTValues(uint256).tTransferAmount (#1324-1326)
Variable LiquidityGeneratorToken.reflectionFromToken(uint256,bool).rTransferAmount (#1169) is too similar to LiquidityGeneratorToken._getValues(uint256).tTransferAmount (#1288)
Variable LiquidityGeneratorToken._transferToExcluded(address,address,uint256).rTransferAmount (#1600) is too similar to LiquidityGeneratorToken._transferFromExcluded(address,address,uint256).tTransferAmount (#1625)
Variable LiquidityGeneratorToken._transferFromExcluded(address,address,uint256).rTransferAmount (#1623) is too similar to LiquidityGeneratorToken._transferStandard(address,address,uint256).tTransferAmount (#1580)
Variable LiquidityGeneratorToken._transferFromExcluded(address,address,uint256).rTransferAmount (#1623) is too similar to LiquidityGeneratorToken._transferToExcluded(address,address,uint256).tTransferAmount (#1602)
Variable LiquidityGeneratorToken._transferFromExcluded(address,address,uint256).rTransferAmount (#1623) is too similar to LiquidityGeneratorToken._getTValues(uint256).tTransferAmount (#1324-1326)
Variable LiquidityGeneratorToken._transferFromExcluded(address,address,uint256).rTransferAmount (#1623) is too similar to LiquidityGeneratorToken._transferFromExcluded(address,address,uint256).tTransferAmount (#1625)
Variable LiquidityGeneratorToken._getRValues(uint256,uint256,uint256,uint256,uint256).rTransferAmount (#1349-1351) is too similar to LiquidityGeneratorToken._getValues(uint256).tTransferAmount (#1288)
Variable LiquidityGeneratorToken._transferStandard(address,address,uint256).rTransferAmount (#1578) is too similar to LiquidityGeneratorToken._transferStandard(address,address,uint256).tTransferAmount (#1580)
Variable LiquidityGeneratorToken._transferToExcluded(address,address,uint256).rTransferAmount (#1600) is too similar to LiquidityGeneratorToken._getValues(uint256).tTransferAmount (#1288)
Variable LiquidityGeneratorToken._transferFromExcluded(address,address,uint256).rTransferAmount (#1623) is too similar to LiquidityGeneratorToken._getValues(uint256).tTransferAmount (#1288)
Variable LiquidityGeneratorToken._transferStandard(address,address,uint256).rTransferAmount (#1578) is too similar to LiquidityGeneratorToken._transferFromExcluded(address,address,uint256).tTransferAmount (#1625)
Variable LiquidityGeneratorToken._transferStandard(address,address,uint256).rTransferAmount (#1578) is too similar to LiquidityGeneratorToken._getTValues(uint256).tTransferAmount (#1324-1326)
Variable LiquidityGeneratorToken._transferBothExcluded(address,address,uint256).rTransferAmount (#1217) is too similar to LiquidityGeneratorToken._transferStandard(address,address,uint256).tTransferAmount (#1580)
Variable LiquidityGeneratorToken._transferBothExcluded(address,address,uint256).rTransferAmount (#1217) is too similar to LiquidityGeneratorToken._transferToExcluded(address,address,uint256).tTransferAmount (#1602)
Variable LiquidityGeneratorToken._transferBothExcluded(address,address,uint256).rTransferAmount (#1217) is too similar to LiquidityGeneratorToken._getTValues(uint256).tTransferAmount (#1324-1326)
Variable LiquidityGeneratorToken._transferStandard(address,address,uint256).rTransferAmount (#1578) is too similar to LiquidityGeneratorToken._getValues(uint256).tTransferAmount (#1288)
Variable LiquidityGeneratorToken._transferBothExcluded(address,address,uint256).rTransferAmount (#1217) is too similar to LiquidityGeneratorToken._transferBothExcluded(address,address,uint256).tTransferAmount (#1219)
Variable LiquidityGeneratorToken._transferBothExcluded(address,address,uint256).rTransferAmount (#1217) is too similar to LiquidityGeneratorToken._transferFromExcluded(address,address,uint256).tTransferAmount (#1625)
Variable LiquidityGeneratorToken.reflectionFromToken(uint256,bool).rTransferAmount (#1169) is too similar to LiquidityGeneratorToken._transferStandard(address,address,uint256).tTransferAmount (#1580)
Variable LiquidityGeneratorToken.reflectionFromToken(uint256,bool).rTransferAmount (#1169) is too similar to LiquidityGeneratorToken._transferToExcluded(address,address,uint256).tTransferAmount (#1602)
Variable LiquidityGeneratorToken._getRValues(uint256,uint256,uint256,uint256,uint256).rTransferAmount (#1349-1351) is too similar to LiquidityGeneratorToken._transferFromExcluded(address,address,uint256).tTransferAmount (#1625)
Variable LiquidityGeneratorToken._getRValues(uint256,uint256,uint256,uint256,uint256).rTransferAmount (#1349-1351) is too similar to LiquidityGeneratorToken._transferBothExcluded(address,address,uint256).tTransferAmount (#1219)
Variable LiquidityGeneratorToken._getRValues(uint256,uint256,uint256,uint256,uint256).rTransferAmount (#1349-1351) is too similar to LiquidityGeneratorToken._transferStandard(address,address,uint256).tTransferAmount (#1580)
Variable LiquidityGeneratorToken._transferStandard(address,address,uint256).rTransferAmount (#1578) is too similar to LiquidityGeneratorToken._transferToExcluded(address,address,uint256).tTransferAmount (#1602)
Variable LiquidityGeneratorToken._getValues(uint256).rTransferAmount (#1293) is too similar to LiquidityGeneratorToken._transferToExcluded(address,address,uint256).tTransferAmount (#1602)
Variable LiquidityGeneratorToken._getValues(uint256).rTransferAmount (#1293) is too similar to LiquidityGeneratorToken._transferFromExcluded(address,address,uint256).tTransferAmount (#1625)
Variable LiquidityGeneratorToken._getValues(uint256).rTransferAmount (#1293) is too similar to LiquidityGeneratorToken._transferBothExcluded(address,address,uint256).tTransferAmount (#1219)
Variable LiquidityGeneratorToken._transferStandard(address,address,uint256).rTransferAmount (#1578) is too similar to LiquidityGeneratorToken._transferBothExcluded(address,address,uint256).tTransferAmount (#1219)
Variable LiquidityGeneratorToken._transferToExcluded(address,address,uint256).rTransferAmount (#1600) is too similar to LiquidityGeneratorToken._transferBothExcluded(address,address,uint256).tTransferAmount (#1219)
Variable LiquidityGeneratorToken._getValues(uint256).rTransferAmount (#1293) is too similar to LiquidityGeneratorToken._transferStandard(address,address,uint256).tTransferAmount (#1580)
Variable LiquidityGeneratorToken._transferFromExcluded(address,address,uint256).rTransferAmount (#1623) is too similar to LiquidityGeneratorToken._transferBothExcluded(address,address,uint256).tTransferAmount (#1219)
Variable LiquidityGeneratorToken._getValues(uint256).rTransferAmount (#1293) is too similar to LiquidityGeneratorToken._getValues(uint256).tTransferAmount (#1288)
Variable LiquidityGeneratorToken._getRValues(uint256,uint256,uint256,uint256,uint256).rTransferAmount (#1349-1351) is too similar to LiquidityGeneratorToken._transferToExcluded(address,address,uint256).tTransferAmount (#1602)
Prevent variables from having similar names.

Additional information: link

renounceOwnership() should be declared external:
- Ownable.renounceOwnership() (#165-167)
transferOwnership(address) should be declared external:
- Ownable.transferOwnership(address) (#173-176)
name() should be declared external:
- LiquidityGeneratorToken.name() (#1045-1047)
symbol() should be declared external:
- LiquidityGeneratorToken.symbol() (#1049-1051)
decimals() should be declared external:
- LiquidityGeneratorToken.decimals() (#1053-1055)
totalSupply() should be declared external:
- LiquidityGeneratorToken.totalSupply() (#1057-1059)
transfer(address,uint256) should be declared external:
- LiquidityGeneratorToken.transfer(address,uint256) (#1066-1073)
allowance(address,address) should be declared external:
- LiquidityGeneratorToken.allowance(address,address) (#1075-1082)
approve(address,uint256) should be declared external:
- LiquidityGeneratorToken.approve(address,uint256) (#1084-1091)
transferFrom(address,address,uint256) should be declared external:
- LiquidityGeneratorToken.transferFrom(address,address,uint256) (#1093-1108)
increaseAllowance(address,uint256) should be declared external:
- LiquidityGeneratorToken.increaseAllowance(address,uint256) (#1110-1121)
decreaseAllowance(address,uint256) should be declared external:
- LiquidityGeneratorToken.decreaseAllowance(address,uint256) (#1123-1137)
isExcludedFromReward(address) should be declared external:
- LiquidityGeneratorToken.isExcludedFromReward(address) (#1139-1141)
totalFees() should be declared external:
- LiquidityGeneratorToken.totalFees() (#1143-1145)
deliver(uint256) should be declared external:
- LiquidityGeneratorToken.deliver(uint256) (#1147-1157)
reflectionFromToken(uint256,bool) should be declared external:
- LiquidityGeneratorToken.reflectionFromToken(uint256,bool) (#1159-1172)
excludeFromReward(address) should be declared external:
- LiquidityGeneratorToken.excludeFromReward(address) (#1187-1195)
excludeFromFee(address) should be declared external:
- LiquidityGeneratorToken.excludeFromFee(address) (#1234-1236)
includeInFee(address) should be declared external:
- LiquidityGeneratorToken.includeInFee(address) (#1238-1240)
setSwapAndLiquifyEnabled(bool) should be declared external:
- LiquidityGeneratorToken.setSwapAndLiquifyEnabled(bool) (#1261-1264)
isExcludedFromFee(address) should be declared external:
- LiquidityGeneratorToken.isExcludedFromFee(address) (#1435-1437)
Use the external attribute for functions never called from the contract.

Additional information: link

Token seems to be untradeable: there is no PancakeSwap trading pair and no trading volumes. Ignore for presale.

Number of Binance Smart Chain (BSC) token holders is less than 100. Token is either dead or inactive. Ignore for presale.

Unable to find website, listings and other project-related information

Young tokens have high risks of scam / price dump / death

Token has no active CoinGecko listing / rank

Token has no active CoinMarketCap listing / rank