Unable to find manual contract audit (e.g. Certik, PeckShield, Solidity...)
Reentrancy in STILTON._transfer(address,address,uint256) (#1001-1045):
External calls:
- swapAndLiquify(contractTokenBalance) (#1032)
- uniswapV2Router.addLiquidityETH{value: ethAmount}(address(this),tokenAmount,0,0,owner(),block.timestamp) (#1093-1100)
- uniswapV2Router.swapExactTokensForETHSupportingFeeOnTransferTokens(tokenAmount,0,path,address(this),block.timestamp) (#1079-1085)
External calls sending eth:
- swapAndLiquify(contractTokenBalance) (#1032)
- uniswapV2Router.addLiquidityETH{value: ethAmount}(address(this),tokenAmount,0,0,owner(),block.timestamp) (#1093-1100)
State variables written after the call(s):
- _tokenTransfer(from,to,amount,takeFee) (#1044)
- _rOwned[address(this)] = _rOwned[address(this)].add(rLiquidity) (#957)
- _rOwned[sender] = _rOwned[sender].sub(rAmount) (#1126)
- _rOwned[sender] = _rOwned[sender].sub(rAmount) (#1135)
- _rOwned[recipient] = _rOwned[recipient].add(rTransferAmount) (#1127)
- _rOwned[sender] = _rOwned[sender].sub(rAmount) (#1146)
- _rOwned[sender] = _rOwned[sender].sub(rAmount) (#873)
- _rOwned[recipient] = _rOwned[recipient].add(rTransferAmount) (#1137)
- _rOwned[recipient] = _rOwned[recipient].add(rTransferAmount) (#1147)
- _rOwned[recipient] = _rOwned[recipient].add(rTransferAmount) (#875)
- _tokenTransfer(from,to,amount,takeFee) (#1044)
- _rTotal = _rTotal.sub(rFee) (#912)
- _tokenTransfer(from,to,amount,takeFee) (#1044)
- _tOwned[address(this)] = _tOwned[address(this)].add(tLiquidity) (#959)
- _tOwned[sender] = _tOwned[sender].sub(tAmount) (#1145)
- _tOwned[sender] = _tOwned[sender].sub(tAmount) (#872)
- _tOwned[recipient] = _tOwned[recipient].add(tTransferAmount) (#1136)
- _tOwned[recipient] = _tOwned[recipient].add(tTransferAmount) (#874)
Apply the check-effects-interactions pattern.
Additional information: link
STILTON.addLiquidity(uint256,uint256) (#1088-1101) ignores return value by uniswapV2Router.addLiquidityETH{value: ethAmount}(address(this),tokenAmount,0,0,owner(),block.timestamp) (#1093-1100)
Ensure that all the return values of the function calls are used.
Additional information: link
STILTON.allowance(address,address).owner (#788) shadows:
- Ownable.owner() (#424-426) (function)
STILTON._approve(address,address,uint256).owner (#993) shadows:
- Ownable.owner() (#424-426) (function)
Rename the local variables that shadow another component.
Additional information: link
STILTON.setTaxFeePercent(uint256) (#889-891) should emit an event for:
- _taxFee = taxFee (#890)
STILTON.setLiquidityFeePercent(uint256) (#893-895) should emit an event for:
- _liquidityFee = liquidityFee (#894)
STILTON.setMaxTxPercent(uint256) (#897-901) should emit an event for:
- _maxTxAmount = _tTotal.mul(maxTxPercent).div(10 ** 2) (#898-900)
Emit an event for critical parameter changes.
Additional information: link
Reentrancy in STILTON._transfer(address,address,uint256) (#1001-1045):
External calls:
- swapAndLiquify(contractTokenBalance) (#1032)
- uniswapV2Router.addLiquidityETH{value: ethAmount}(address(this),tokenAmount,0,0,owner(),block.timestamp) (#1093-1100)
- uniswapV2Router.swapExactTokensForETHSupportingFeeOnTransferTokens(tokenAmount,0,path,address(this),block.timestamp) (#1079-1085)
External calls sending eth:
- swapAndLiquify(contractTokenBalance) (#1032)
- uniswapV2Router.addLiquidityETH{value: ethAmount}(address(this),tokenAmount,0,0,owner(),block.timestamp) (#1093-1100)
State variables written after the call(s):
- _tokenTransfer(from,to,amount,takeFee) (#1044)
- _liquidityFee = _previousLiquidityFee (#986)
- _liquidityFee = 0 (#981)
- _tokenTransfer(from,to,amount,takeFee) (#1044)
- _previousLiquidityFee = _liquidityFee (#978)
- _tokenTransfer(from,to,amount,takeFee) (#1044)
- _previousTaxFee = _taxFee (#977)
- _tokenTransfer(from,to,amount,takeFee) (#1044)
- _tFeeTotal = _tFeeTotal.add(tFee) (#913)
- _tokenTransfer(from,to,amount,takeFee) (#1044)
- _taxFee = _previousTaxFee (#985)
- _taxFee = 0 (#980)
Reentrancy in STILTON.constructor() (#744-760):
External calls:
- uniswapV2Pair = IUniswapV2Factory(_uniswapV2Router.factory()).createPair(address(this),_uniswapV2Router.WETH()) (#749-750)
State variables written after the call(s):
- _isExcludedFromFee[owner()] = true (#756)
- _isExcludedFromFee[address(this)] = true (#757)
- uniswapV2Router = _uniswapV2Router (#753)
Reentrancy in STILTON.swapAndLiquify(uint256) (#1047-1068):
External calls:
- swapTokensForEth(half) (#1059)
- uniswapV2Router.swapExactTokensForETHSupportingFeeOnTransferTokens(tokenAmount,0,path,address(this),block.timestamp) (#1079-1085)
- addLiquidity(otherHalf,newBalance) (#1065)
- uniswapV2Router.addLiquidityETH{value: ethAmount}(address(this),tokenAmount,0,0,owner(),block.timestamp) (#1093-1100)
External calls sending eth:
- addLiquidity(otherHalf,newBalance) (#1065)
- uniswapV2Router.addLiquidityETH{value: ethAmount}(address(this),tokenAmount,0,0,owner(),block.timestamp) (#1093-1100)
State variables written after the call(s):
- addLiquidity(otherHalf,newBalance) (#1065)
- _allowances[owner][spender] = amount (#997)
Reentrancy in STILTON.transferFrom(address,address,uint256) (#797-801):
External calls:
- _transfer(sender,recipient,amount) (#798)
- uniswapV2Router.addLiquidityETH{value: ethAmount}(address(this),tokenAmount,0,0,owner(),block.timestamp) (#1093-1100)
- uniswapV2Router.swapExactTokensForETHSupportingFeeOnTransferTokens(tokenAmount,0,path,address(this),block.timestamp) (#1079-1085)
External calls sending eth:
- _transfer(sender,recipient,amount) (#798)
- uniswapV2Router.addLiquidityETH{value: ethAmount}(address(this),tokenAmount,0,0,owner(),block.timestamp) (#1093-1100)
State variables written after the call(s):
- _approve(sender,_msgSender(),_allowances[sender][_msgSender()].sub(amount,ERC20: transfer amount exceeds allowance)) (#799)
- _allowances[owner][spender] = amount (#997)
Apply the check-effects-interactions pattern.
Additional information: link
Reentrancy in STILTON._transfer(address,address,uint256) (#1001-1045):
External calls:
- swapAndLiquify(contractTokenBalance) (#1032)
- uniswapV2Router.addLiquidityETH{value: ethAmount}(address(this),tokenAmount,0,0,owner(),block.timestamp) (#1093-1100)
- uniswapV2Router.swapExactTokensForETHSupportingFeeOnTransferTokens(tokenAmount,0,path,address(this),block.timestamp) (#1079-1085)
External calls sending eth:
- swapAndLiquify(contractTokenBalance) (#1032)
- uniswapV2Router.addLiquidityETH{value: ethAmount}(address(this),tokenAmount,0,0,owner(),block.timestamp) (#1093-1100)
Event emitted after the call(s):
- Transfer(sender,recipient,tTransferAmount) (#1130)
- _tokenTransfer(from,to,amount,takeFee) (#1044)
- Transfer(sender,recipient,tTransferAmount) (#1140)
- _tokenTransfer(from,to,amount,takeFee) (#1044)
- Transfer(sender,recipient,tTransferAmount) (#1150)
- _tokenTransfer(from,to,amount,takeFee) (#1044)
- Transfer(sender,recipient,tTransferAmount) (#878)
- _tokenTransfer(from,to,amount,takeFee) (#1044)
Reentrancy in STILTON.constructor() (#744-760):
External calls:
- uniswapV2Pair = IUniswapV2Factory(_uniswapV2Router.factory()).createPair(address(this),_uniswapV2Router.WETH()) (#749-750)
Event emitted after the call(s):
- Transfer(address(0),_msgSender(),_tTotal) (#759)
Reentrancy in STILTON.swapAndLiquify(uint256) (#1047-1068):
External calls:
- swapTokensForEth(half) (#1059)
- uniswapV2Router.swapExactTokensForETHSupportingFeeOnTransferTokens(tokenAmount,0,path,address(this),block.timestamp) (#1079-1085)
- addLiquidity(otherHalf,newBalance) (#1065)
- uniswapV2Router.addLiquidityETH{value: ethAmount}(address(this),tokenAmount,0,0,owner(),block.timestamp) (#1093-1100)
External calls sending eth:
- addLiquidity(otherHalf,newBalance) (#1065)
- uniswapV2Router.addLiquidityETH{value: ethAmount}(address(this),tokenAmount,0,0,owner(),block.timestamp) (#1093-1100)
Event emitted after the call(s):
- Approval(owner,spender,amount) (#998)
- addLiquidity(otherHalf,newBalance) (#1065)
- SwapAndLiquify(half,newBalance,otherHalf) (#1067)
Reentrancy in STILTON.transferFrom(address,address,uint256) (#797-801):
External calls:
- _transfer(sender,recipient,amount) (#798)
- uniswapV2Router.addLiquidityETH{value: ethAmount}(address(this),tokenAmount,0,0,owner(),block.timestamp) (#1093-1100)
- uniswapV2Router.swapExactTokensForETHSupportingFeeOnTransferTokens(tokenAmount,0,path,address(this),block.timestamp) (#1079-1085)
External calls sending eth:
- _transfer(sender,recipient,amount) (#798)
- uniswapV2Router.addLiquidityETH{value: ethAmount}(address(this),tokenAmount,0,0,owner(),block.timestamp) (#1093-1100)
Event emitted after the call(s):
- Approval(owner,spender,amount) (#998)
- _approve(sender,_msgSender(),_allowances[sender][_msgSender()].sub(amount,ERC20: transfer amount exceeds allowance)) (#799)
Apply the check-effects-interactions pattern.
Additional information: link
Ownable.unlock() (#471-476) uses timestamp for comparisons
Dangerous comparisons:
- require(bool,string)(now > _lockTime,Contract is locked) (#473)
Avoid relying on block.timestamp.
Additional information: link
Address.isContract(address) (#276-285) uses assembly
- INLINE ASM (#283)
Address._functionCallWithValue(address,bytes,uint256,string) (#369-390) uses assembly
- INLINE ASM (#382-385)
Do not use evm assembly.
Additional information: link
STILTON.includeInReward(address) (#858-869) has costly operations inside a loop:
- _excluded.pop() (#865)
Use a local variable to hold the loop computation result.
Additional information: link
Address._functionCallWithValue(address,bytes,uint256,string) (#369-390) is never used and should be removed
Address.functionCall(address,bytes) (#329-331) is never used and should be removed
Address.functionCall(address,bytes,string) (#339-341) is never used and should be removed
Address.functionCallWithValue(address,bytes,uint256) (#354-356) is never used and should be removed
Address.functionCallWithValue(address,bytes,uint256,string) (#364-367) is never used and should be removed
Address.isContract(address) (#276-285) is never used and should be removed
Address.sendValue(address,uint256) (#303-309) is never used and should be removed
Context._msgData() (#248-251) is never used and should be removed
SafeMath.mod(uint256,uint256) (#221-223) is never used and should be removed
SafeMath.mod(uint256,uint256,string) (#237-240) is never used and should be removed
Remove unused functions.
Additional information: link
STILTON._rTotal (#708) is set pre-construction with a non-constant function or state variable:
- (MAX - (MAX % _tTotal))
STILTON._previousTaxFee (#716) is set pre-construction with a non-constant function or state variable:
- _taxFee
STILTON._previousLiquidityFee (#719) is set pre-construction with a non-constant function or state variable:
- _liquidityFee
Remove any initialization of state variables via non-constant state variables or function calls. If variables must be set upon contract deployment, locate initialization in the constructor instead.
Additional information: link
Low level call in Address.sendValue(address,uint256) (#303-309):
- (success) = recipient.call{value: amount}() (#307)
Low level call in Address._functionCallWithValue(address,bytes,uint256,string) (#369-390):
- (success,returndata) = target.call{value: weiValue}(data) (#373)
Avoid low-level calls. Check the call success. If the call is meant for a contract, check for code existence
Additional information: link
Function IUniswapV2Pair.DOMAIN_SEPARATOR() (#515) is not in mixedCase
Function IUniswapV2Pair.PERMIT_TYPEHASH() (#516) is not in mixedCase
Function IUniswapV2Pair.MINIMUM_LIQUIDITY() (#533) is not in mixedCase
Function IUniswapV2Router01.WETH() (#555) is not in mixedCase
Parameter STILTON.setSwapAndLiquifyEnabled(bool)._enabled (#903) is not in mixedCase
Parameter STILTON.calculateTaxFee(uint256)._amount (#962) is not in mixedCase
Parameter STILTON.calculateLiquidityFee(uint256)._amount (#968) is not in mixedCase
Variable STILTON._taxFee (#715) is not in mixedCase
Variable STILTON._liquidityFee (#718) is not in mixedCase
Variable STILTON._maxTxAmount (#727) is not in mixedCase
Follow the Solidity naming convention.
Additional information: link
Redundant expression "this (#249)" inContext (#243-252)
Remove redundant statements if they congest code but offer no value.
Additional information: link
Variable IUniswapV2Router01.addLiquidity(address,address,uint256,uint256,uint256,uint256,address,uint256).amountADesired (#560) is too similar to IUniswapV2Router01.addLiquidity(address,address,uint256,uint256,uint256,uint256,address,uint256).amountBDesired (#561)
Variable STILTON._getValues(uint256).rTransferAmount (#918) is too similar to STILTON._transferFromExcluded(address,address,uint256).tTransferAmount (#1144)
Variable STILTON._transferBothExcluded(address,address,uint256).rTransferAmount (#871) is too similar to STILTON._transferBothExcluded(address,address,uint256).tTransferAmount (#871)
Variable STILTON._transferStandard(address,address,uint256).rTransferAmount (#1125) is too similar to STILTON._transferBothExcluded(address,address,uint256).tTransferAmount (#871)
Variable STILTON.reflectionFromToken(uint256,bool).rTransferAmount (#836) is too similar to STILTON._transferBothExcluded(address,address,uint256).tTransferAmount (#871)
Variable STILTON._transferFromExcluded(address,address,uint256).rTransferAmount (#1144) is too similar to STILTON._transferBothExcluded(address,address,uint256).tTransferAmount (#871)
Variable STILTON._transferBothExcluded(address,address,uint256).rTransferAmount (#871) is too similar to STILTON._transferToExcluded(address,address,uint256).tTransferAmount (#1134)
Variable STILTON._getRValues(uint256,uint256,uint256,uint256).rTransferAmount (#933) is too similar to STILTON._transferBothExcluded(address,address,uint256).tTransferAmount (#871)
Variable STILTON._transferStandard(address,address,uint256).rTransferAmount (#1125) is too similar to STILTON._transferToExcluded(address,address,uint256).tTransferAmount (#1134)
Variable STILTON._transferToExcluded(address,address,uint256).rTransferAmount (#1134) is too similar to STILTON._transferToExcluded(address,address,uint256).tTransferAmount (#1134)
Variable STILTON.reflectionFromToken(uint256,bool).rTransferAmount (#836) is too similar to STILTON._transferToExcluded(address,address,uint256).tTransferAmount (#1134)
Variable STILTON._transferStandard(address,address,uint256).rTransferAmount (#1125) is too similar to STILTON._getTValues(uint256).tTransferAmount (#925)
Variable STILTON._transferFromExcluded(address,address,uint256).rTransferAmount (#1144) is too similar to STILTON._transferToExcluded(address,address,uint256).tTransferAmount (#1134)
Variable STILTON._getRValues(uint256,uint256,uint256,uint256).rTransferAmount (#933) is too similar to STILTON._transferToExcluded(address,address,uint256).tTransferAmount (#1134)
Variable STILTON.reflectionFromToken(uint256,bool).rTransferAmount (#836) is too similar to STILTON._getTValues(uint256).tTransferAmount (#925)
Variable STILTON.reflectionFromToken(uint256,bool).rTransferAmount (#836) is too similar to STILTON._getValues(uint256).tTransferAmount (#917)
Variable STILTON._transferBothExcluded(address,address,uint256).rTransferAmount (#871) is too similar to STILTON._transferFromExcluded(address,address,uint256).tTransferAmount (#1144)
Variable STILTON._getRValues(uint256,uint256,uint256,uint256).rTransferAmount (#933) is too similar to STILTON._getTValues(uint256).tTransferAmount (#925)
Variable STILTON._getValues(uint256).rTransferAmount (#918) is too similar to STILTON._transferBothExcluded(address,address,uint256).tTransferAmount (#871)
Variable STILTON._transferToExcluded(address,address,uint256).rTransferAmount (#1134) is too similar to STILTON._transferFromExcluded(address,address,uint256).tTransferAmount (#1144)
Variable STILTON._transferStandard(address,address,uint256).rTransferAmount (#1125) is too similar to STILTON._transferFromExcluded(address,address,uint256).tTransferAmount (#1144)
Variable STILTON.reflectionFromToken(uint256,bool).rTransferAmount (#836) is too similar to STILTON._transferFromExcluded(address,address,uint256).tTransferAmount (#1144)
Variable STILTON._transferFromExcluded(address,address,uint256).rTransferAmount (#1144) is too similar to STILTON._transferFromExcluded(address,address,uint256).tTransferAmount (#1144)
Variable STILTON._getValues(uint256).rTransferAmount (#918) is too similar to STILTON._transferToExcluded(address,address,uint256).tTransferAmount (#1134)
Variable STILTON._getRValues(uint256,uint256,uint256,uint256).rTransferAmount (#933) is too similar to STILTON._transferFromExcluded(address,address,uint256).tTransferAmount (#1144)
Variable STILTON._transferStandard(address,address,uint256).rTransferAmount (#1125) is too similar to STILTON._transferStandard(address,address,uint256).tTransferAmount (#1125)
Variable STILTON._getValues(uint256).rTransferAmount (#918) is too similar to STILTON._getTValues(uint256).tTransferAmount (#925)
Variable STILTON.reflectionFromToken(uint256,bool).rTransferAmount (#836) is too similar to STILTON._transferStandard(address,address,uint256).tTransferAmount (#1125)
Variable STILTON._getRValues(uint256,uint256,uint256,uint256).rTransferAmount (#933) is too similar to STILTON._transferStandard(address,address,uint256).tTransferAmount (#1125)
Variable STILTON._transferToExcluded(address,address,uint256).rTransferAmount (#1134) is too similar to STILTON._getTValues(uint256).tTransferAmount (#925)
Variable STILTON._transferFromExcluded(address,address,uint256).rTransferAmount (#1144) is too similar to STILTON._getValues(uint256).tTransferAmount (#917)
Variable STILTON._getRValues(uint256,uint256,uint256,uint256).rTransferAmount (#933) is too similar to STILTON._getValues(uint256).tTransferAmount (#917)
Variable STILTON._getValues(uint256).rTransferAmount (#918) is too similar to STILTON._transferStandard(address,address,uint256).tTransferAmount (#1125)
Variable STILTON._transferFromExcluded(address,address,uint256).rTransferAmount (#1144) is too similar to STILTON._getTValues(uint256).tTransferAmount (#925)
Variable STILTON._transferBothExcluded(address,address,uint256).rTransferAmount (#871) is too similar to STILTON._transferStandard(address,address,uint256).tTransferAmount (#1125)
Variable STILTON._transferToExcluded(address,address,uint256).rTransferAmount (#1134) is too similar to STILTON._transferBothExcluded(address,address,uint256).tTransferAmount (#871)
Variable STILTON._getValues(uint256).rTransferAmount (#918) is too similar to STILTON._getValues(uint256).tTransferAmount (#917)
Variable STILTON._transferToExcluded(address,address,uint256).rTransferAmount (#1134) is too similar to STILTON._transferStandard(address,address,uint256).tTransferAmount (#1125)
Variable STILTON._transferBothExcluded(address,address,uint256).rTransferAmount (#871) is too similar to STILTON._getValues(uint256).tTransferAmount (#917)
Variable STILTON._transferStandard(address,address,uint256).rTransferAmount (#1125) is too similar to STILTON._getValues(uint256).tTransferAmount (#917)
Variable STILTON._transferFromExcluded(address,address,uint256).rTransferAmount (#1144) is too similar to STILTON._transferStandard(address,address,uint256).tTransferAmount (#1125)
Variable STILTON._transferToExcluded(address,address,uint256).rTransferAmount (#1134) is too similar to STILTON._getValues(uint256).tTransferAmount (#917)
Variable STILTON._transferBothExcluded(address,address,uint256).rTransferAmount (#871) is too similar to STILTON._getTValues(uint256).tTransferAmount (#925)
Prevent variables from having similar names.
Additional information: link
STILTON.slitherConstructorVariables() (#693-1157) uses literals with too many digits:
- _tTotal = 1000000 * 10 ** 6 * 10 ** 9 (#707)
STILTON.slitherConstructorVariables() (#693-1157) uses literals with too many digits:
- _maxTxAmount = 5000000 * 10 ** 6 * 10 ** 9 (#727)
STILTON.slitherConstructorVariables() (#693-1157) uses literals with too many digits:
- numTokensSellToAddToLiquidity = 500000 * 10 ** 6 * 10 ** 9 (#728)
Use: Ether suffix, Time suffix, or The scientific notation
Additional information: link
STILTON._decimals (#713) should be constant
STILTON._name (#711) should be constant
STILTON._symbol (#712) should be constant
STILTON._tTotal (#707) should be constant
STILTON.numTokensSellToAddToLiquidity (#728) should be constant
Add the constant attributes to state variables that never change.
Additional information: link
renounceOwnership() should be declared external:
- Ownable.renounceOwnership() (#443-446)
transferOwnership(address) should be declared external:
- Ownable.transferOwnership(address) (#452-456)
geUnlockTime() should be declared external:
- Ownable.geUnlockTime() (#458-460)
lock(uint256) should be declared external:
- Ownable.lock(uint256) (#463-468)
unlock() should be declared external:
- Ownable.unlock() (#471-476)
name() should be declared external:
- STILTON.name() (#762-764)
symbol() should be declared external:
- STILTON.symbol() (#766-768)
decimals() should be declared external:
- STILTON.decimals() (#770-772)
totalSupply() should be declared external:
- STILTON.totalSupply() (#774-776)
transfer(address,uint256) should be declared external:
- STILTON.transfer(address,uint256) (#783-786)
allowance(address,address) should be declared external:
- STILTON.allowance(address,address) (#788-790)
approve(address,uint256) should be declared external:
- STILTON.approve(address,uint256) (#792-795)
transferFrom(address,address,uint256) should be declared external:
- STILTON.transferFrom(address,address,uint256) (#797-801)
increaseAllowance(address,uint256) should be declared external:
- STILTON.increaseAllowance(address,uint256) (#803-806)
decreaseAllowance(address,uint256) should be declared external:
- STILTON.decreaseAllowance(address,uint256) (#808-811)
isExcludedFromReward(address) should be declared external:
- STILTON.isExcludedFromReward(address) (#813-815)
totalFees() should be declared external:
- STILTON.totalFees() (#817-819)
deliver(uint256) should be declared external:
- STILTON.deliver(uint256) (#821-828)
reflectionFromToken(uint256,bool) should be declared external:
- STILTON.reflectionFromToken(uint256,bool) (#830-839)
excludeFromReward(address) should be declared external:
- STILTON.excludeFromReward(address) (#847-855)
excludeFromFee(address) should be declared external:
- STILTON.excludeFromFee(address) (#881-883)
includeInFee(address) should be declared external:
- STILTON.includeInFee(address) (#885-887)
setSwapAndLiquifyEnabled(bool) should be declared external:
- STILTON.setSwapAndLiquifyEnabled(bool) (#903-906)
isExcludedFromFee(address) should be declared external:
- STILTON.isExcludedFromFee(address) (#989-991)
Use the external attribute for functions never called from the contract.
Additional information: link
Unable to find website, listings and other project-related information
Young tokens have high risks of scam / price dump / death
Token has no active CoinGecko listing / rank
Token has no active CoinMarketCap listing / rank
Unable to find Telegram and Twitter accounts