Squidge [Squidgemon Bro] Token

SquidgemonBro.swapBack() (#578-624) sends eth to arbitrary user
Dangerous calls:
- (tmpSuccess) = address(marketingFeeReceiver).call{gas: 30000,value: amountBNBMarketing}() (#607)
- (tmpSuccess,None) = address(devFeeReceiver).call{gas: 30000,value: amountBNBDev}() (#608)
Ensure that an arbitrary user cannot withdraw unauthorized funds.

Additional information: link

Reentrancy in SquidgemonBro._transferFrom(address,address,uint256) (#469-517):
External calls:
- swapBack() (#496)
- router.swapExactTokensForETHSupportingFeeOnTransferTokens(amountToSwap,0,path,address(this),block.timestamp) (#589-595)
- distributor.deposit{value: amountBNBReflection}() (#606)
- (tmpSuccess) = address(marketingFeeReceiver).call{gas: 30000,value: amountBNBMarketing}() (#607)
- (tmpSuccess,None) = address(devFeeReceiver).call{gas: 30000,value: amountBNBDev}() (#608)
- router.addLiquidityETH{value: amountBNBLiquidity}(address(this),amountToLiquify,0,0,autoLiquidityReceiver,block.timestamp) (#614-621)
External calls sending eth:
- swapBack() (#496)
- distributor.deposit{value: amountBNBReflection}() (#606)
- (tmpSuccess) = address(marketingFeeReceiver).call{gas: 30000,value: amountBNBMarketing}() (#607)
- (tmpSuccess,None) = address(devFeeReceiver).call{gas: 30000,value: amountBNBDev}() (#608)
- router.addLiquidityETH{value: amountBNBLiquidity}(address(this),amountToLiquify,0,0,autoLiquidityReceiver,block.timestamp) (#614-621)
State variables written after the call(s):
- _balances[sender] = _balances[sender].sub(amount,Insufficient Balance) (#499)
- _balances[recipient] = _balances[recipient].add(amountReceived) (#502)
- amountReceived = takeFee(sender,amount,(recipient == pair)) (#501)
- _balances[address(this)] = _balances[address(this)].add(feeAmount) (#540)
Apply the check-effects-interactions pattern.

Additional information: link

DividendDistributor.distributeDividend(address) (#290-301) ignores return value by RWRD.transfer(shareholder,amount) (#296)
Use SafeERC20, or ensure that the transfer/transferFrom return value is checked.

Additional information: link

Too many vulnerabilities (Unchecked transfer, Reentrancy vulnerability, etc.). High risk of a scam. DYOR & manual audit are advised.

Unable to find manual contract audit (e.g. Certik, PeckShield, Solidity...)

SquidgemonBro.swapBack().tmpSuccess (#607) is written in both
(tmpSuccess) = address(marketingFeeReceiver).call{gas: 30000,value: amountBNBMarketing}() (#607)
(tmpSuccess,None) = address(devFeeReceiver).call{gas: 30000,value: amountBNBDev}() (#608)
SquidgemonBro.swapBack().tmpSuccess (#607) is written in both
(tmpSuccess,None) = address(devFeeReceiver).call{gas: 30000,value: amountBNBDev}() (#608)
tmpSuccess = false (#611)
Fix or remove the writes.

Additional information: link

Combination 1: Reentrancy vulnerabilities + Functions that send Ether to arbitraty destination. Usual for scams. May be justified by some complex mechanics (e.g. rebase, reflections). DYOR & manual audit are advised.

Combination 2: Unchecked transfer + Functions that send Ether to arbitraty destination. Usual for scams. May be justified by some complex mechanics (e.g. rebase, reflections). DYOR & manual audit are advised.

Combination 3: Reentrancy vulnerabilities + Unchecked transfer vulnerability. Usual for scams. May be justified by some complex mechanics (e.g. rebase, reflections). DYOR & manual audit are advised.

Contract ownership is not renounced (belongs to a wallet)

SquidgemonBro.slitherConstructorVariables() (#334-760) performs a multiplication on the result of a division:
-_maxTxAmount = (_totalSupply * 10) / 1000 (#347)
-_maxWalletToken = _maxTxAmount * 1 (#348)
Consider ordering multiplication before division.

Additional information: link

Reentrancy in DividendDistributor.distributeDividend(address) (#290-301):
External calls:
- RWRD.transfer(shareholder,amount) (#296)
State variables written after the call(s):
- shares[shareholder].totalRealised = shares[shareholder].totalRealised.add(amount) (#298)
- shares[shareholder].totalExcluded = getCumulativeDividends(shares[shareholder].amount) (#299)
Reentrancy in DividendDistributor.process(uint256) (#259-283):
External calls:
- distributeDividend(shareholders[currentIndex]) (#275)
- RWRD.transfer(shareholder,amount) (#296)
State variables written after the call(s):
- currentIndex ++ (#280)
Reentrancy in DividendDistributor.setShare(address,uint256) (#223-237):
External calls:
- distributeDividend(shareholder) (#225)
- RWRD.transfer(shareholder,amount) (#296)
State variables written after the call(s):
- shares[shareholder].amount = amount (#235)
- shares[shareholder].totalExcluded = getCumulativeDividends(shares[shareholder].amount) (#236)
Apply the check-effects-interactions pattern.

Additional information: link

SquidgemonBro.manage_blacklist(address[],bool).i (#642) is a local variable never initialized
Initialize all the variables. If a variable is meant to be initialized to zero, explicitly set it to zero to improve code readability.

Additional information: link

SquidgemonBro.swapBack() (#578-624) ignores return value by router.addLiquidityETH{value: amountBNBLiquidity}(address(this),amountToLiquify,0,0,autoLiquidityReceiver,block.timestamp) (#614-621)
Ensure that all the return values of the function calls are used.

Additional information: link

DividendDistributor.setDistributionCriteria(uint256,uint256) (#218-221) should emit an event for:
- minPeriod = _minPeriod (#219)
- minDistribution = _minDistribution (#220)
SquidgemonBro.setMaxTxPercent_base1000(uint256) (#460-462) should emit an event for:
- _maxTxAmount = (_totalSupply * maxTXPercentage_base1000) / 1000 (#461)
SquidgemonBro.setTxLimit(uint256) (#464-466) should emit an event for:
- _maxTxAmount = amount (#465)
SquidgemonBro.set_sell_multiplier(uint256) (#563-565) should emit an event for:
- sellMultiplier = Multiplier (#564)
SquidgemonBro.setFees(uint256,uint256,uint256,uint256,uint256) (#660-668) should emit an event for:
- liquidityFee = _liquidityFee (#661)
- reflectionFee = _reflectionFee (#662)
- marketingFee = _marketingFee (#663)
- devFee = _devFee (#664)
- totalFee = _liquidityFee.add(_reflectionFee).add(_marketingFee).add(_devFee) (#665)
- feeDenominator = _feeDenominator (#666)
SquidgemonBro.setSwapBackSettings(bool,uint256) (#676-679) should emit an event for:
- swapThreshold = _amount (#678)
SquidgemonBro.setTargetLiquidity(uint256,uint256) (#681-684) should emit an event for:
- targetLiquidity = _target (#682)
- targetLiquidityDenominator = _denominator (#683)
Emit an event for critical parameter changes.

Additional information: link

Auth.transferOwnership(address).adr (#100) lacks a zero-check on :
- owner = adr (#101)
SquidgemonBro.setFeeReceivers(address,address,address)._autoLiquidityReceiver (#670) lacks a zero-check on :
- autoLiquidityReceiver = _autoLiquidityReceiver (#671)
SquidgemonBro.setFeeReceivers(address,address,address)._marketingFeeReceiver (#670) lacks a zero-check on :
- marketingFeeReceiver = _marketingFeeReceiver (#672)
SquidgemonBro.setFeeReceivers(address,address,address)._devFeeReceiver (#670) lacks a zero-check on :
- devFeeReceiver = _devFeeReceiver (#673)
Check that the address is not zero.

Additional information: link

DividendDistributor.distributeDividend(address) (#290-301) has external calls inside a loop: RWRD.transfer(shareholder,amount) (#296)
SquidgemonBro.multiTransfer(address,address[],uint256[]) (#710-734) has external calls inside a loop: distributor.setShare(addresses[i_scope_0],_balances[addresses[i_scope_0]]) (#726)
SquidgemonBro.multiTransfer_fixed(address,address[],uint256) (#736-755) has external calls inside a loop: distributor.setShare(addresses[i],_balances[addresses[i]]) (#747)
Favor pull over push strategy for external calls.

Additional information: link

Reentrancy in SquidgemonBro.constructor() (#395-419):
External calls:
- pair = IDEXFactory(router.factory()).createPair(WBNB,address(this)) (#397)
State variables written after the call(s):
- _allowances[address(this)][address(router)] = uint256(- 1) (#398)
- _balances[msg.sender] = _totalSupply (#417)
- autoLiquidityReceiver = msg.sender (#413)
- devFeeReceiver = 0x92E426E78fdcF107680E62c7Bf22026b5b25146a (#415)
- distributor = new DividendDistributor(address(router)) (#400)
- isDividendExempt[pair] = true (#409)
- isDividendExempt[address(this)] = true (#410)
- isDividendExempt[DEAD] = true (#411)
- isFeeExempt[msg.sender] = true (#402)
- isTimelockExempt[msg.sender] = true (#405)
- isTimelockExempt[DEAD] = true (#406)
- isTimelockExempt[address(this)] = true (#407)
- isTxLimitExempt[msg.sender] = true (#403)
- marketingFeeReceiver = 0x9cC3A5A6E803b5DB47A9745c02e7E11C9E01cC0B (#414)
Reentrancy in DividendDistributor.deposit() (#239-257):
External calls:
- router.swapExactETHForTokensSupportingFeeOnTransferTokens{value: msg.value}(0,path,address(this),block.timestamp) (#246-251)
State variables written after the call(s):
- dividendsPerShare = dividendsPerShare.add(dividendsPerShareAccuracyFactor.mul(amount).div(totalShares)) (#256)
- totalDividends = totalDividends.add(amount) (#255)
Reentrancy in DividendDistributor.distributeDividend(address) (#290-301):
External calls:
- RWRD.transfer(shareholder,amount) (#296)
State variables written after the call(s):
- shareholderClaims[shareholder] = block.timestamp (#297)
Reentrancy in DividendDistributor.setShare(address,uint256) (#223-237):
External calls:
- distributeDividend(shareholder) (#225)
- RWRD.transfer(shareholder,amount) (#296)
State variables written after the call(s):
- addShareholder(shareholder) (#229)
- shareholderIndexes[shareholder] = shareholders.length (#323)
- removeShareholder(shareholder) (#231)
- shareholderIndexes[shareholders[shareholders.length - 1]] = shareholderIndexes[shareholder] (#329)
- addShareholder(shareholder) (#229)
- shareholders.push(shareholder) (#324)
- removeShareholder(shareholder) (#231)
- shareholders[shareholderIndexes[shareholder]] = shareholders[shareholders.length - 1] (#328)
- shareholders.pop() (#330)
- totalShares = totalShares.sub(shares[shareholder].amount).add(amount) (#234)
Apply the check-effects-interactions pattern.

Additional information: link

Reentrancy in SquidgemonBro._transferFrom(address,address,uint256) (#469-517):
External calls:
- swapBack() (#496)
- router.swapExactTokensForETHSupportingFeeOnTransferTokens(amountToSwap,0,path,address(this),block.timestamp) (#589-595)
- distributor.deposit{value: amountBNBReflection}() (#606)
- (tmpSuccess) = address(marketingFeeReceiver).call{gas: 30000,value: amountBNBMarketing}() (#607)
- (tmpSuccess,None) = address(devFeeReceiver).call{gas: 30000,value: amountBNBDev}() (#608)
- router.addLiquidityETH{value: amountBNBLiquidity}(address(this),amountToLiquify,0,0,autoLiquidityReceiver,block.timestamp) (#614-621)
- distributor.setShare(sender,_balances[sender]) (#506)
- distributor.setShare(recipient,_balances[recipient]) (#510)
- distributor.process(distributorGas) (#513)
External calls sending eth:
- swapBack() (#496)
- distributor.deposit{value: amountBNBReflection}() (#606)
- (tmpSuccess) = address(marketingFeeReceiver).call{gas: 30000,value: amountBNBMarketing}() (#607)
- (tmpSuccess,None) = address(devFeeReceiver).call{gas: 30000,value: amountBNBDev}() (#608)
- router.addLiquidityETH{value: amountBNBLiquidity}(address(this),amountToLiquify,0,0,autoLiquidityReceiver,block.timestamp) (#614-621)
Event emitted after the call(s):
- Transfer(sender,recipient,amountReceived) (#515)
Reentrancy in SquidgemonBro._transferFrom(address,address,uint256) (#469-517):
External calls:
- swapBack() (#496)
- router.swapExactTokensForETHSupportingFeeOnTransferTokens(amountToSwap,0,path,address(this),block.timestamp) (#589-595)
- distributor.deposit{value: amountBNBReflection}() (#606)
- (tmpSuccess) = address(marketingFeeReceiver).call{gas: 30000,value: amountBNBMarketing}() (#607)
- (tmpSuccess,None) = address(devFeeReceiver).call{gas: 30000,value: amountBNBDev}() (#608)
- router.addLiquidityETH{value: amountBNBLiquidity}(address(this),amountToLiquify,0,0,autoLiquidityReceiver,block.timestamp) (#614-621)
External calls sending eth:
- swapBack() (#496)
- distributor.deposit{value: amountBNBReflection}() (#606)
- (tmpSuccess) = address(marketingFeeReceiver).call{gas: 30000,value: amountBNBMarketing}() (#607)
- (tmpSuccess,None) = address(devFeeReceiver).call{gas: 30000,value: amountBNBDev}() (#608)
- router.addLiquidityETH{value: amountBNBLiquidity}(address(this),amountToLiquify,0,0,autoLiquidityReceiver,block.timestamp) (#614-621)
Event emitted after the call(s):
- Transfer(sender,address(this),feeAmount) (#541)
- amountReceived = takeFee(sender,amount,(recipient == pair)) (#501)
Reentrancy in SquidgemonBro.constructor() (#395-419):
External calls:
- pair = IDEXFactory(router.factory()).createPair(WBNB,address(this)) (#397)
Event emitted after the call(s):
- Transfer(address(0),msg.sender,_totalSupply) (#418)
Reentrancy in SquidgemonBro.swapBack() (#578-624):
External calls:
- router.swapExactTokensForETHSupportingFeeOnTransferTokens(amountToSwap,0,path,address(this),block.timestamp) (#589-595)
- distributor.deposit{value: amountBNBReflection}() (#606)
- (tmpSuccess) = address(marketingFeeReceiver).call{gas: 30000,value: amountBNBMarketing}() (#607)
- (tmpSuccess,None) = address(devFeeReceiver).call{gas: 30000,value: amountBNBDev}() (#608)
- router.addLiquidityETH{value: amountBNBLiquidity}(address(this),amountToLiquify,0,0,autoLiquidityReceiver,block.timestamp) (#614-621)
External calls sending eth:
- distributor.deposit{value: amountBNBReflection}() (#606)
- (tmpSuccess) = address(marketingFeeReceiver).call{gas: 30000,value: amountBNBMarketing}() (#607)
- (tmpSuccess,None) = address(devFeeReceiver).call{gas: 30000,value: amountBNBDev}() (#608)
- router.addLiquidityETH{value: amountBNBLiquidity}(address(this),amountToLiquify,0,0,autoLiquidityReceiver,block.timestamp) (#614-621)
Event emitted after the call(s):
- AutoLiquify(amountBNBLiquidity,amountToLiquify) (#622)
Apply the check-effects-interactions pattern.

Additional information: link

DividendDistributor.shouldDistribute(address) (#285-288) uses timestamp for comparisons
Dangerous comparisons:
- shareholderClaims[shareholder] + minPeriod < block.timestamp && getUnpaidEarnings(shareholder) > minDistribution (#286-287)
SquidgemonBro._transferFrom(address,address,uint256) (#469-517) uses timestamp for comparisons
Dangerous comparisons:
- require(bool,string)(cooldownTimer[recipient] < block.timestamp,Please wait for 1min between two buys) (#489)
Avoid relying on block.timestamp.

Additional information: link

DividendDistributor.process(uint256) (#259-283) has costly operations inside a loop:
- currentIndex = 0 (#271)
DividendDistributor.distributeDividend(address) (#290-301) has costly operations inside a loop:
- totalDistributed = totalDistributed.add(amount) (#295)
DividendDistributor.process(uint256) (#259-283) has costly operations inside a loop:
- currentIndex ++ (#280)
Use a local variable to hold the loop computation result.

Additional information: link

SquidgemonBro._maxTxAmount (#347) is set pre-construction with a non-constant function or state variable:
- (_totalSupply * 10) / 1000
SquidgemonBro._maxWalletToken (#348) is set pre-construction with a non-constant function or state variable:
- _maxTxAmount * 1
SquidgemonBro.totalFee (#366) is set pre-construction with a non-constant function or state variable:
- marketingFee + reflectionFee + liquidityFee + devFee
SquidgemonBro.swapThreshold (#391) is set pre-construction with a non-constant function or state variable:
- _totalSupply * 30 / 10000
Remove any initialization of state variables via non-constant state variables or function calls. If variables must be set upon contract deployment, locate initialization in the constructor instead.

Additional information: link

Low level call in SquidgemonBro.swapBack() (#578-624):
- (tmpSuccess) = address(marketingFeeReceiver).call{gas: 30000,value: amountBNBMarketing}() (#607)
- (tmpSuccess,None) = address(devFeeReceiver).call{gas: 30000,value: amountBNBDev}() (#608)
Avoid low-level calls. Check the call success. If the call is meant for a contract, check for code existence

Additional information: link

Function IDEXRouter.WETH() (#115) is not in mixedCase
Parameter DividendDistributor.setDistributionCriteria(uint256,uint256)._minPeriod (#218) is not in mixedCase
Parameter DividendDistributor.setDistributionCriteria(uint256,uint256)._minDistribution (#218) is not in mixedCase
Variable DividendDistributor._token (#171) is not in mixedCase
Variable DividendDistributor.RWRD (#179) is not in mixedCase
Variable DividendDistributor.WBNB (#180) is not in mixedCase
Function SquidgemonBro.setMaxWalletPercent_base1000(uint256) (#457-459) is not in mixedCase
Parameter SquidgemonBro.setMaxWalletPercent_base1000(uint256).maxWallPercent_base1000 (#457) is not in mixedCase
Function SquidgemonBro.setMaxTxPercent_base1000(uint256) (#460-462) is not in mixedCase
Parameter SquidgemonBro.setMaxTxPercent_base1000(uint256).maxTXPercentage_base1000 (#460) is not in mixedCase
Function SquidgemonBro.clearStuckBalance_sender(uint256) (#558-561) is not in mixedCase
Function SquidgemonBro.set_sell_multiplier(uint256) (#563-565) is not in mixedCase
Parameter SquidgemonBro.set_sell_multiplier(uint256).Multiplier (#563) is not in mixedCase
Parameter SquidgemonBro.tradingStatus(bool)._status (#568) is not in mixedCase
Parameter SquidgemonBro.cooldownEnabled(bool,uint8)._status (#573) is not in mixedCase
Parameter SquidgemonBro.cooldownEnabled(bool,uint8)._interval (#573) is not in mixedCase
Function SquidgemonBro.enable_blacklist(bool) (#637-639) is not in mixedCase
Parameter SquidgemonBro.enable_blacklist(bool)._status (#637) is not in mixedCase
Function SquidgemonBro.manage_blacklist(address[],bool) (#641-645) is not in mixedCase
Parameter SquidgemonBro.setFees(uint256,uint256,uint256,uint256,uint256)._liquidityFee (#660) is not in mixedCase
Parameter SquidgemonBro.setFees(uint256,uint256,uint256,uint256,uint256)._reflectionFee (#660) is not in mixedCase
Parameter SquidgemonBro.setFees(uint256,uint256,uint256,uint256,uint256)._marketingFee (#660) is not in mixedCase
Parameter SquidgemonBro.setFees(uint256,uint256,uint256,uint256,uint256)._devFee (#660) is not in mixedCase
Parameter SquidgemonBro.setFees(uint256,uint256,uint256,uint256,uint256)._feeDenominator (#660) is not in mixedCase
Parameter SquidgemonBro.setFeeReceivers(address,address,address)._autoLiquidityReceiver (#670) is not in mixedCase
Parameter SquidgemonBro.setFeeReceivers(address,address,address)._marketingFeeReceiver (#670) is not in mixedCase
Parameter SquidgemonBro.setFeeReceivers(address,address,address)._devFeeReceiver (#670) is not in mixedCase
Parameter SquidgemonBro.setSwapBackSettings(bool,uint256)._enabled (#676) is not in mixedCase
Parameter SquidgemonBro.setSwapBackSettings(bool,uint256)._amount (#676) is not in mixedCase
Parameter SquidgemonBro.setTargetLiquidity(uint256,uint256)._target (#681) is not in mixedCase
Parameter SquidgemonBro.setTargetLiquidity(uint256,uint256)._denominator (#681) is not in mixedCase
Parameter SquidgemonBro.setDistributionCriteria(uint256,uint256)._minPeriod (#686) is not in mixedCase
Parameter SquidgemonBro.setDistributionCriteria(uint256,uint256)._minDistribution (#686) is not in mixedCase
Function SquidgemonBro.multiTransfer_fixed(address,address[],uint256) (#736-755) is not in mixedCase
Variable SquidgemonBro.WBNB (#337) is not in mixedCase
Variable SquidgemonBro.DEAD (#338) is not in mixedCase
Variable SquidgemonBro.ZERO (#339) is not in mixedCase
Constant SquidgemonBro._name (#341) is not in UPPER_CASE_WITH_UNDERSCORES
Constant SquidgemonBro._symbol (#342) is not in UPPER_CASE_WITH_UNDERSCORES
Constant SquidgemonBro._decimals (#343) is not in UPPER_CASE_WITH_UNDERSCORES
Variable SquidgemonBro._totalSupply (#345) is not in mixedCase
Variable SquidgemonBro._maxTxAmount (#347) is not in mixedCase
Variable SquidgemonBro._maxWalletToken (#348) is not in mixedCase
Variable SquidgemonBro._balances (#350) is not in mixedCase
Variable SquidgemonBro._allowances (#351) is not in mixedCase
Follow the Solidity naming convention.

Additional information: link

Variable IDEXRouter.addLiquidity(address,address,uint256,uint256,uint256,uint256,address,uint256).amountADesired (#120) is too similar to IDEXRouter.addLiquidity(address,address,uint256,uint256,uint256,uint256,address,uint256).amountBDesired (#121)
Prevent variables from having similar names.

Additional information: link

SquidgemonBro.slitherConstructorVariables() (#334-760) uses literals with too many digits:
- DEAD = 0x000000000000000000000000000000000000dEaD (#338)
SquidgemonBro.slitherConstructorVariables() (#334-760) uses literals with too many digits:
- ZERO = 0x0000000000000000000000000000000000000000 (#339)
SquidgemonBro.slitherConstructorVariables() (#334-760) uses literals with too many digits:
- distributorGas = 500000 (#384)
Use: Ether suffix, Time suffix, or The scientific notation

Additional information: link

DividendDistributor.WBNB (#180) should be constant
DividendDistributor.dividendsPerShareAccuracyFactor (#193) should be constant
SquidgemonBro.DEAD (#338) should be constant
SquidgemonBro.WBNB (#337) should be constant
SquidgemonBro.ZERO (#339) should be constant
SquidgemonBro._totalSupply (#345) should be constant
Add the constant attributes to state variables that never change.

Additional information: link

authorize(address) should be declared external:
- Auth.authorize(address) (#84-86)
unauthorize(address) should be declared external:
- Auth.unauthorize(address) (#88-90)
transferOwnership(address) should be declared external:
- Auth.transferOwnership(address) (#100-104)
tradingStatus(bool) should be declared external:
- SquidgemonBro.tradingStatus(bool) (#568-570)
cooldownEnabled(bool,uint8) should be declared external:
- SquidgemonBro.cooldownEnabled(bool,uint8) (#573-576)
enable_blacklist(bool) should be declared external:
- SquidgemonBro.enable_blacklist(bool) (#637-639)
manage_blacklist(address[],bool) should be declared external:
- SquidgemonBro.manage_blacklist(address[],bool) (#641-645)
Use the external attribute for functions never called from the contract.

Additional information: link

Token seems to be untradeable: there is no PancakeSwap trading pair and no trading volumes. Ignore for presale.

Number of Binance Smart Chain (BSC) token holders is low.

Unable to find website, listings and other project-related information

Young tokens have high risks of scam / price dump / death

Token has no active CoinGecko listing / rank

Token has no active CoinMarketCap listing / rank