Since its establishment in 2022,space bank has a large number of community members,and space bank naturall yhas a largenumber of supporters. For community users,putting their idle funds into space bank is a safe and low-risk financia lbehavior.
SPK.withdrawBNBMarket() (#1289-1291) sends eth to arbitrary user
Dangerous calls:
- address(_marketingWalletAddress).transfer(address(this).balance) (#1290)
Ensure that an arbitrary user cannot withdraw unauthorized funds.
Additional information: link
Reentrancy in SPK._transfer(address,address,uint256) (#1136-1225):
External calls:
- swapAndLiquify(AmountLiquidityFee) (#1180)
- uniswapV2Router.addLiquidityETH{value: ethAmount}(address(this),tokenAmount,0,0,owner(),block.timestamp) (#1273-1280)
- uniswapV2Router.swapExactTokensForETHSupportingFeeOnTransferTokens(tokenAmount,0,path,address(this),block.timestamp) (#1259-1265)
- market2BNB(contractTokenBalance) (#1182)
- uniswapV2Router.swapExactTokensForETHSupportingFeeOnTransferTokens(tokenAmount,0,path,address(this),block.timestamp) (#1259-1265)
External calls sending eth:
- swapAndLiquify(AmountLiquidityFee) (#1180)
- uniswapV2Router.addLiquidityETH{value: ethAmount}(address(this),tokenAmount,0,0,owner(),block.timestamp) (#1273-1280)
- market2BNB(contractTokenBalance) (#1182)
- address(_marketingWalletAddress).transfer(address(this).balance) (#1290)
State variables written after the call(s):
- AmountLiquidityFee += LFee (#1201)
- AmountLiquidityFee += LFee (#1208)
- _tokenTransfer(from,_burnWalletAddress,DFee) (#1220)
- _balances[sender] = _balances[sender].sub(amount) (#1319)
- _balances[recipient] = _balances[recipient].add(amount) (#1320)
- _tokenTransfer(from,address(this),fees.sub(DFee)) (#1222)
- _balances[sender] = _balances[sender].sub(amount) (#1319)
- _balances[recipient] = _balances[recipient].add(amount) (#1320)
- _tokenTransfer(from,to,amount) (#1224)
- _balances[sender] = _balances[sender].sub(amount) (#1319)
- _balances[recipient] = _balances[recipient].add(amount) (#1320)
- inSwapAndLiquify = false (#1183)
Apply the check-effects-interactions pattern.
Additional information: link
SPK.withdrawToken(address[],address) (#1293-1311) ignores return value by erc20.transfer(recipient,balance) (#1308)
Use SafeERC20, or ensure that the transfer/transferFrom return value is checked.
Additional information: link
Unable to find manual contract audit (e.g. Certik, PeckShield, Solidity...)
Combination 1: Reentrancy vulnerabilities + Functions that send Ether to arbitraty destination. Usual for scams. May be justified by some complex mechanics (e.g. rebase, reflections). DYOR & manual audit are advised.
Combination 2: Unchecked transfer + Functions that send Ether to arbitraty destination. Usual for scams. May be justified by some complex mechanics (e.g. rebase, reflections). DYOR & manual audit are advised.
Combination 3: Reentrancy vulnerabilities + Unchecked transfer vulnerability. Usual for scams. May be justified by some complex mechanics (e.g. rebase, reflections). DYOR & manual audit are advised.
Contract ownership is not renounced (belongs to a wallet)
SPK._tTotal (#855) is set pre-construction with a non-constant function or state variable:
- 10000000 * 10 ** _decimals
SPK.numTokensSellToAddToLiquidity (#877) is set pre-construction with a non-constant function or state variable:
- 200 * 10 ** _decimals
Remove any initialization of state variables via non-constant state variables or function calls. If variables must be set upon contract deployment, locate initialization in the constructor instead.
Additional information: link
solc-0.8.14 is not recommended for deployment
Deploy with any of the following Solidity versions: 0.5.16 - 0.5.17, 0.6.11 - 0.6.12, 0.7.5 - 0.7.6 Use a simple pragma version that allows any of these versions. Consider using the latest version of Solidity for testing.
Additional information: link
Low level call in Address.sendValue(address,uint256) (#301-313):
- (success) = recipient.call{value: amount}() (#308)
Low level call in Address._functionCallWithValue(address,bytes,uint256,string) (#398-426):
- (success,returndata) = target.call{value: weiValue}(data) (#407-409)
Avoid low-level calls. Check the call success. If the call is meant for a contract, check for code existence
Additional information: link
Address._functionCallWithValue(address,bytes,uint256,string) (#398-426) is never used and should be removed
Address.functionCall(address,bytes) (#333-338) is never used and should be removed
Address.functionCall(address,bytes,string) (#346-352) is never used and should be removed
Address.functionCallWithValue(address,bytes,uint256) (#365-377) is never used and should be removed
Address.functionCallWithValue(address,bytes,uint256,string) (#385-396) is never used and should be removed
Address.isContract(address) (#272-283) is never used and should be removed
Address.sendValue(address,uint256) (#301-313) is never used and should be removed
Context._msgData() (#245-248) is never used and should be removed
SafeMath.mod(uint256,uint256) (#214-216) is never used and should be removed
SafeMath.mod(uint256,uint256,string) (#230-237) is never used and should be removed
Remove unused functions.
Additional information: link
SPK._transfer(address,address,uint256).DFee (#1197) is a local variable never initialized
SPK._transfer(address,address,uint256).LFee (#1196) is a local variable never initialized
SPK._transfer(address,address,uint256).MFee (#1198) is a local variable never initialized
Initialize all the variables. If a variable is meant to be initialized to zero, explicitly set it to zero to improve code readability.
Additional information: link
SPK.addLiquidity(uint256,uint256) (#1268-1281) ignores return value by uniswapV2Router.addLiquidityETH{value: ethAmount}(address(this),tokenAmount,0,0,owner(),block.timestamp) (#1273-1280)
Ensure that all the return values of the function calls are used.
Additional information: link
SPK.allowance(address,address).owner (#943) shadows:
- Ownable.owner() (#463-465) (function)
SPK._approve(address,address,uint256).owner (#1125) shadows:
- Ownable.owner() (#463-465) (function)
Rename the local variables that shadow another component.
Additional information: link
SPK.setLiquidityFeePercent(uint256,uint256) (#1025-1031) should emit an event for:
- buyLiquidityFee = _buyLiquidityFee (#1029)
- sellLiquidityFee = _sellLiquidityFee (#1030)
SPK.setMarketFeePercent(uint256,uint256) (#1033-1039) should emit an event for:
- buyMarketFee = _buyMarketFee (#1037)
- sellMarketFee = _sellMarketFee (#1038)
SPK.setDeadFeePercent(uint256,uint256) (#1041-1047) should emit an event for:
- buyDeadFee = _buyDeadFee (#1045)
- sellDeadFee = _sellDeadFee (#1046)
SPK.setNumTokensSellToAddToLiquidity(uint256) (#1075-1077) should emit an event for:
- numTokensSellToAddToLiquidity = num (#1076)
Emit an event for critical parameter changes.
Additional information: link
SPK.setMarketingWalletAddress(address).marketingWalletAddress (#1063) lacks a zero-check on :
- _marketingWalletAddress = marketingWalletAddress (#1067)
SPK.withdrawToken(address[],address).recipient (#1293) lacks a zero-check on :
- address(recipient).transfer(ethers) (#1302)
Check that the address is not zero.
Additional information: link
SPK.swapTokensForEth(uint256) (#1250-1266) has external calls inside a loop: path[1] = uniswapV2Router.WETH() (#1254)
SPK.swapTokensForEth(uint256) (#1250-1266) has external calls inside a loop: uniswapV2Router.swapExactTokensForETHSupportingFeeOnTransferTokens(tokenAmount,0,path,address(this),block.timestamp) (#1259-1265)
SPK.addLiquidity(uint256,uint256) (#1268-1281) has external calls inside a loop: uniswapV2Router.addLiquidityETH{value: ethAmount}(address(this),tokenAmount,0,0,owner(),block.timestamp) (#1273-1280)
SPK.withdrawBNBMarket() (#1289-1291) has external calls inside a loop: address(_marketingWalletAddress).transfer(address(this).balance) (#1290)
SPK.withdrawToken(address[],address) (#1293-1311) has external calls inside a loop: balance = erc20.balanceOf(address(this)) (#1307)
SPK.withdrawToken(address[],address) (#1293-1311) has external calls inside a loop: erc20.transfer(recipient,balance) (#1308)
Favor pull over push strategy for external calls.
Additional information: link
Reentrancy in SPK._transfer(address,address,uint256) (#1136-1225):
External calls:
- swapAndLiquify(AmountLiquidityFee) (#1180)
- uniswapV2Router.addLiquidityETH{value: ethAmount}(address(this),tokenAmount,0,0,owner(),block.timestamp) (#1273-1280)
- uniswapV2Router.swapExactTokensForETHSupportingFeeOnTransferTokens(tokenAmount,0,path,address(this),block.timestamp) (#1259-1265)
- market2BNB(contractTokenBalance) (#1182)
- uniswapV2Router.swapExactTokensForETHSupportingFeeOnTransferTokens(tokenAmount,0,path,address(this),block.timestamp) (#1259-1265)
External calls sending eth:
- swapAndLiquify(AmountLiquidityFee) (#1180)
- uniswapV2Router.addLiquidityETH{value: ethAmount}(address(this),tokenAmount,0,0,owner(),block.timestamp) (#1273-1280)
- market2BNB(contractTokenBalance) (#1182)
- address(_marketingWalletAddress).transfer(address(this).balance) (#1290)
State variables written after the call(s):
- market2BNB(contractTokenBalance) (#1182)
- AmountMarketFee = 0 (#1285)
- AmountMarketFee += MFee (#1204)
- AmountMarketFee += MFee (#1211)
- market2BNB(contractTokenBalance) (#1182)
- _allowances[owner][spender] = amount (#1132)
Reentrancy in SPK.constructor() (#892-912):
External calls:
- uniswapV2Pair = IUniswapV2Factory(_uniswapV2Router.factory()).createPair(address(this),_uniswapV2Router.WETH()) (#899-900)
State variables written after the call(s):
- _creator = msg.sender (#909)
- _isExcludedFromFee[owner()] = true (#906)
- _isExcludedFromFee[address(this)] = true (#907)
- _isExcludedFromFee[_marketingWalletAddress] = true (#908)
- uniswapV2Router = _uniswapV2Router (#903)
Reentrancy in SPK.market2BNB(uint256) (#1283-1287):
External calls:
- swapTokensForEth(amount) (#1284)
- uniswapV2Router.swapExactTokensForETHSupportingFeeOnTransferTokens(tokenAmount,0,path,address(this),block.timestamp) (#1259-1265)
State variables written after the call(s):
- AmountMarketFee = 0 (#1285)
Reentrancy in SPK.swapAndLiquify(uint256) (#1227-1248):
External calls:
- swapTokensForEth(half) (#1239)
- uniswapV2Router.swapExactTokensForETHSupportingFeeOnTransferTokens(tokenAmount,0,path,address(this),block.timestamp) (#1259-1265)
- addLiquidity(otherHalf,newBalance) (#1245)
- uniswapV2Router.addLiquidityETH{value: ethAmount}(address(this),tokenAmount,0,0,owner(),block.timestamp) (#1273-1280)
External calls sending eth:
- addLiquidity(otherHalf,newBalance) (#1245)
- uniswapV2Router.addLiquidityETH{value: ethAmount}(address(this),tokenAmount,0,0,owner(),block.timestamp) (#1273-1280)
State variables written after the call(s):
- AmountLiquidityFee = AmountLiquidityFee - contractTokenBalance (#1246)
- addLiquidity(otherHalf,newBalance) (#1245)
- _allowances[owner][spender] = amount (#1132)
Reentrancy in SPK.transferFrom(address,address,uint256) (#961-976):
External calls:
- _transfer(sender,recipient,amount) (#966)
- uniswapV2Router.addLiquidityETH{value: ethAmount}(address(this),tokenAmount,0,0,owner(),block.timestamp) (#1273-1280)
- uniswapV2Router.swapExactTokensForETHSupportingFeeOnTransferTokens(tokenAmount,0,path,address(this),block.timestamp) (#1259-1265)
External calls sending eth:
- _transfer(sender,recipient,amount) (#966)
- address(_marketingWalletAddress).transfer(address(this).balance) (#1290)
- uniswapV2Router.addLiquidityETH{value: ethAmount}(address(this),tokenAmount,0,0,owner(),block.timestamp) (#1273-1280)
State variables written after the call(s):
- _approve(sender,_msgSender(),_allowances[sender][_msgSender()].sub(amount,ERC20: transfer amount exceeds allowance)) (#967-974)
- _allowances[owner][spender] = amount (#1132)
Apply the check-effects-interactions pattern.
Additional information: link
Reentrancy in SPK._transfer(address,address,uint256) (#1136-1225):
External calls:
- swapAndLiquify(AmountLiquidityFee) (#1180)
- uniswapV2Router.addLiquidityETH{value: ethAmount}(address(this),tokenAmount,0,0,owner(),block.timestamp) (#1273-1280)
- uniswapV2Router.swapExactTokensForETHSupportingFeeOnTransferTokens(tokenAmount,0,path,address(this),block.timestamp) (#1259-1265)
- market2BNB(contractTokenBalance) (#1182)
- uniswapV2Router.swapExactTokensForETHSupportingFeeOnTransferTokens(tokenAmount,0,path,address(this),block.timestamp) (#1259-1265)
External calls sending eth:
- swapAndLiquify(AmountLiquidityFee) (#1180)
- uniswapV2Router.addLiquidityETH{value: ethAmount}(address(this),tokenAmount,0,0,owner(),block.timestamp) (#1273-1280)
- market2BNB(contractTokenBalance) (#1182)
- address(_marketingWalletAddress).transfer(address(this).balance) (#1290)
Event emitted after the call(s):
- Approval(owner,spender,amount) (#1133)
- market2BNB(contractTokenBalance) (#1182)
- Transfer(sender,recipient,amount) (#1321)
- _tokenTransfer(from,address(this),fees.sub(DFee)) (#1222)
- Transfer(sender,recipient,amount) (#1321)
- _tokenTransfer(from,to,amount) (#1224)
- Transfer(sender,recipient,amount) (#1321)
- _tokenTransfer(from,_burnWalletAddress,DFee) (#1220)
Reentrancy in SPK.constructor() (#892-912):
External calls:
- uniswapV2Pair = IUniswapV2Factory(_uniswapV2Router.factory()).createPair(address(this),_uniswapV2Router.WETH()) (#899-900)
Event emitted after the call(s):
- Transfer(address(0),_msgSender(),_tTotal) (#911)
Reentrancy in SPK.swapAndLiquify(uint256) (#1227-1248):
External calls:
- swapTokensForEth(half) (#1239)
- uniswapV2Router.swapExactTokensForETHSupportingFeeOnTransferTokens(tokenAmount,0,path,address(this),block.timestamp) (#1259-1265)
- addLiquidity(otherHalf,newBalance) (#1245)
- uniswapV2Router.addLiquidityETH{value: ethAmount}(address(this),tokenAmount,0,0,owner(),block.timestamp) (#1273-1280)
External calls sending eth:
- addLiquidity(otherHalf,newBalance) (#1245)
- uniswapV2Router.addLiquidityETH{value: ethAmount}(address(this),tokenAmount,0,0,owner(),block.timestamp) (#1273-1280)
Event emitted after the call(s):
- Approval(owner,spender,amount) (#1133)
- addLiquidity(otherHalf,newBalance) (#1245)
- SwapAndLiquify(half,newBalance,otherHalf) (#1247)
Reentrancy in SPK.transferFrom(address,address,uint256) (#961-976):
External calls:
- _transfer(sender,recipient,amount) (#966)
- uniswapV2Router.addLiquidityETH{value: ethAmount}(address(this),tokenAmount,0,0,owner(),block.timestamp) (#1273-1280)
- uniswapV2Router.swapExactTokensForETHSupportingFeeOnTransferTokens(tokenAmount,0,path,address(this),block.timestamp) (#1259-1265)
External calls sending eth:
- _transfer(sender,recipient,amount) (#966)
- address(_marketingWalletAddress).transfer(address(this).balance) (#1290)
- uniswapV2Router.addLiquidityETH{value: ethAmount}(address(this),tokenAmount,0,0,owner(),block.timestamp) (#1273-1280)
Event emitted after the call(s):
- Approval(owner,spender,amount) (#1133)
- _approve(sender,_msgSender(),_allowances[sender][_msgSender()].sub(amount,ERC20: transfer amount exceeds allowance)) (#967-974)
Apply the check-effects-interactions pattern.
Additional information: link
Address.isContract(address) (#272-283) uses assembly
- INLINE ASM (#279-281)
Address._functionCallWithValue(address,bytes,uint256,string) (#398-426) uses assembly
- INLINE ASM (#418-421)
Do not use evm assembly.
Additional information: link
SPK._transfer(address,address,uint256) (#1136-1225) has costly operations inside a loop:
- inSwapAndLiquify = true (#1179)
SPK.swapAndLiquify(uint256) (#1227-1248) has costly operations inside a loop:
- AmountLiquidityFee = AmountLiquidityFee - contractTokenBalance (#1246)
SPK.market2BNB(uint256) (#1283-1287) has costly operations inside a loop:
- AmountMarketFee = 0 (#1285)
SPK._transfer(address,address,uint256) (#1136-1225) has costly operations inside a loop:
- inSwapAndLiquify = false (#1183)
SPK._transfer(address,address,uint256) (#1136-1225) has costly operations inside a loop:
- AmountLiquidityFee += LFee (#1201)
SPK._transfer(address,address,uint256) (#1136-1225) has costly operations inside a loop:
- AmountMarketFee += MFee (#1204)
SPK._transfer(address,address,uint256) (#1136-1225) has costly operations inside a loop:
- AmountLiquidityFee += LFee (#1208)
SPK._transfer(address,address,uint256) (#1136-1225) has costly operations inside a loop:
- AmountMarketFee += MFee (#1211)
Use a local variable to hold the loop computation result.
Additional information: link
Function IUniswapV2Pair.DOMAIN_SEPARATOR() (#564) is not in mixedCase
Function IUniswapV2Pair.PERMIT_TYPEHASH() (#566) is not in mixedCase
Function IUniswapV2Pair.MINIMUM_LIQUIDITY() (#597) is not in mixedCase
Function IUniswapV2Router.WETH() (#643) is not in mixedCase
Parameter SPK.setLiquidityFeePercent(uint256,uint256)._buyLiquidityFee (#1026) is not in mixedCase
Parameter SPK.setLiquidityFeePercent(uint256,uint256)._sellLiquidityFee (#1027) is not in mixedCase
Parameter SPK.setMarketFeePercent(uint256,uint256)._buyMarketFee (#1033) is not in mixedCase
Parameter SPK.setMarketFeePercent(uint256,uint256)._sellMarketFee (#1033) is not in mixedCase
Parameter SPK.setDeadFeePercent(uint256,uint256)._buyDeadFee (#1041) is not in mixedCase
Parameter SPK.setDeadFeePercent(uint256,uint256)._sellDeadFee (#1041) is not in mixedCase
Parameter SPK.setSwapAndLiquifyEnabled(bool)._enabled (#1058) is not in mixedCase
Parameter SPK.setTradeEnabled(bool)._enabled (#1070) is not in mixedCase
Variable SPK._isExcludedFromFee (#851) is not in mixedCase
Variable SPK._isCpalaceed (#852) is not in mixedCase
Variable SPK.AmountLiquidityFee (#866) is not in mixedCase
Variable SPK.AmountMarketFee (#867) is not in mixedCase
Follow the Solidity naming convention.
Additional information: link
Redundant expression "this (#246)" inContext (#240-249)
Remove redundant statements if they congest code but offer no value.
Additional information: link
Reentrancy in SPK._transfer(address,address,uint256) (#1136-1225):
External calls:
- market2BNB(contractTokenBalance) (#1182)
- address(_marketingWalletAddress).transfer(address(this).balance) (#1290)
External calls sending eth:
- swapAndLiquify(AmountLiquidityFee) (#1180)
- uniswapV2Router.addLiquidityETH{value: ethAmount}(address(this),tokenAmount,0,0,owner(),block.timestamp) (#1273-1280)
- market2BNB(contractTokenBalance) (#1182)
- address(_marketingWalletAddress).transfer(address(this).balance) (#1290)
State variables written after the call(s):
- AmountLiquidityFee += LFee (#1201)
- AmountLiquidityFee += LFee (#1208)
- AmountMarketFee += MFee (#1204)
- AmountMarketFee += MFee (#1211)
- _tokenTransfer(from,_burnWalletAddress,DFee) (#1220)
- _balances[sender] = _balances[sender].sub(amount) (#1319)
- _balances[recipient] = _balances[recipient].add(amount) (#1320)
- _tokenTransfer(from,address(this),fees.sub(DFee)) (#1222)
- _balances[sender] = _balances[sender].sub(amount) (#1319)
- _balances[recipient] = _balances[recipient].add(amount) (#1320)
- _tokenTransfer(from,to,amount) (#1224)
- _balances[sender] = _balances[sender].sub(amount) (#1319)
- _balances[recipient] = _balances[recipient].add(amount) (#1320)
- inSwapAndLiquify = false (#1183)
Event emitted after the call(s):
- Transfer(sender,recipient,amount) (#1321)
- _tokenTransfer(from,address(this),fees.sub(DFee)) (#1222)
- Transfer(sender,recipient,amount) (#1321)
- _tokenTransfer(from,_burnWalletAddress,DFee) (#1220)
- Transfer(sender,recipient,amount) (#1321)
- _tokenTransfer(from,to,amount) (#1224)
Reentrancy in SPK.transferFrom(address,address,uint256) (#961-976):
External calls:
- _transfer(sender,recipient,amount) (#966)
- address(_marketingWalletAddress).transfer(address(this).balance) (#1290)
External calls sending eth:
- _transfer(sender,recipient,amount) (#966)
- address(_marketingWalletAddress).transfer(address(this).balance) (#1290)
- uniswapV2Router.addLiquidityETH{value: ethAmount}(address(this),tokenAmount,0,0,owner(),block.timestamp) (#1273-1280)
State variables written after the call(s):
- _approve(sender,_msgSender(),_allowances[sender][_msgSender()].sub(amount,ERC20: transfer amount exceeds allowance)) (#967-974)
- _allowances[owner][spender] = amount (#1132)
Event emitted after the call(s):
- Approval(owner,spender,amount) (#1133)
- _approve(sender,_msgSender(),_allowances[sender][_msgSender()].sub(amount,ERC20: transfer amount exceeds allowance)) (#967-974)
Apply the check-effects-interactions pattern.
Additional information: link
Variable IUniswapV2Router.addLiquidity(address,address,uint256,uint256,uint256,uint256,address,uint256).amountADesired (#648) is too similar to IUniswapV2Router.addLiquidity(address,address,uint256,uint256,uint256,uint256,address,uint256).amountBDesired (#649)
Prevent variables from having similar names.
Additional information: link
SPK.slitherConstructorVariables() (#844-1324) uses literals with too many digits:
- _tTotal = 10000000 * 10 ** _decimals (#855)
SPK.slitherConstructorVariables() (#844-1324) uses literals with too many digits:
- _burnWalletAddress = 0x000000000000000000000000000000000000dEaD (#879-880)
Use: Ether suffix, Time suffix, or The scientific notation
Additional information: link
Ownable._previousOwner (#443) is never used in SPK (#844-1324)
Ownable._lockTime (#444) is never used in SPK (#844-1324)
Remove unused state variables.
Additional information: link
Ownable._lockTime (#444) should be constant
Ownable._previousOwner (#443) should be constant
SPK._burnWalletAddress (#879-880) should be constant
SPK._decimals (#854) should be constant
SPK._name (#857) should be constant
SPK._symbol (#858) should be constant
Add the constant attributes to state variables that never change.
Additional information: link
renounceOwnership() should be declared external:
- Ownable.renounceOwnership() (#482-485)
transferOwnership(address) should be declared external:
- Ownable.transferOwnership(address) (#491-498)
name() should be declared external:
- SPK.name() (#914-916)
symbol() should be declared external:
- SPK.symbol() (#918-920)
decimals() should be declared external:
- SPK.decimals() (#922-924)
totalSupply() should be declared external:
- SPK.totalSupply() (#926-928)
transfer(address,uint256) should be declared external:
- SPK.transfer(address,uint256) (#934-941)
allowance(address,address) should be declared external:
- SPK.allowance(address,address) (#943-950)
approve(address,uint256) should be declared external:
- SPK.approve(address,uint256) (#952-959)
transferFrom(address,address,uint256) should be declared external:
- SPK.transferFrom(address,address,uint256) (#961-976)
increaseAllowance(address,uint256) should be declared external:
- SPK.increaseAllowance(address,uint256) (#978-989)
decreaseAllowance(address,uint256) should be declared external:
- SPK.decreaseAllowance(address,uint256) (#991-1005)
excludeMultipleAccountsFromFee(address[],bool) should be declared external:
- SPK.excludeMultipleAccountsFromFee(address[],bool) (#1007-1014)
setSwapAndLiquifyEnabled(bool) should be declared external:
- SPK.setSwapAndLiquifyEnabled(bool) (#1058-1061)
setMarketingWalletAddress(address) should be declared external:
- SPK.setMarketingWalletAddress(address) (#1063-1068)
setTradeEnabled(bool) should be declared external:
- SPK.setTradeEnabled(bool) (#1070-1073)
setNumTokensSellToAddToLiquidity(uint256) should be declared external:
- SPK.setNumTokensSellToAddToLiquidity(uint256) (#1075-1077)
isExcludedFromFee(address) should be declared external:
- SPK.isExcludedFromFee(address) (#1079-1081)
multiTransfer4AirDrop(address[],uint256) should be declared external:
- SPK.multiTransfer4AirDrop(address[],uint256) (#1109-1119)
withdrawToken(address[],address) should be declared external:
- SPK.withdrawToken(address[],address) (#1293-1311)
Use the external attribute for functions never called from the contract.
Additional information: link
Unable to find website, listings and other project-related information
Young tokens have high risks of scam / price dump / death
Token has no active CoinGecko listing / rank
Token has no active CoinMarketCap listing / rank
Token is relatively young, but twitter if very old (probably it's fake).
Unable to find Blog account (Reddit or Medium)
Unable to find Youtube account
Unable to find Discord account
Twitter account has few posts