SHIBACASH Token

CoinToken.addLiquidity(uint256,uint256) (#1089-1102) sends eth to arbitrary user
Dangerous calls:
- uniswapV2Router.addLiquidityETH{value: ethAmount}(address(this),tokenAmount,0,0,owner(),block.timestamp) (#1094-1101)
Ensure that an arbitrary user cannot withdraw unauthorized funds.

Additional information: link

Reentrancy in CoinToken._transfer(address,address,uint256) (#1002-1046):
External calls:
- swapAndLiquify(contractTokenBalance) (#1033)
- uniswapV2Router.addLiquidityETH{value: ethAmount}(address(this),tokenAmount,0,0,owner(),block.timestamp) (#1094-1101)
- uniswapV2Router.swapExactTokensForETHSupportingFeeOnTransferTokens(tokenAmount,0,path,address(this),block.timestamp) (#1080-1086)
External calls sending eth:
- swapAndLiquify(contractTokenBalance) (#1033)
- uniswapV2Router.addLiquidityETH{value: ethAmount}(address(this),tokenAmount,0,0,owner(),block.timestamp) (#1094-1101)
State variables written after the call(s):
- _tokenTransfer(from,to,amount,takeFee) (#1045)
- _rOwned[address(this)] = _rOwned[address(this)].add(rLiquidity) (#953)
- _rOwned[sender] = _rOwned[sender].sub(rAmount) (#1127)
- _rOwned[sender] = _rOwned[sender].sub(rAmount) (#1136)
- _rOwned[sender] = _rOwned[sender].sub(rAmount) (#1147)
- _rOwned[recipient] = _rOwned[recipient].add(rTransferAmount) (#1128)
- _rOwned[sender] = _rOwned[sender].sub(rAmount) (#867)
- _rOwned[recipient] = _rOwned[recipient].add(rTransferAmount) (#1138)
- _rOwned[recipient] = _rOwned[recipient].add(rTransferAmount) (#1148)
- _rOwned[recipient] = _rOwned[recipient].add(rTransferAmount) (#869)
- _tokenTransfer(from,to,amount,takeFee) (#1045)
- _rTotal = _rTotal.sub(rFee) (#908)
- _tokenTransfer(from,to,amount,takeFee) (#1045)
- _tOwned[address(this)] = _tOwned[address(this)].add(tLiquidity) (#955)
- _tOwned[sender] = _tOwned[sender].sub(tAmount) (#866)
- _tOwned[sender] = _tOwned[sender].sub(tAmount) (#1146)
- _tOwned[recipient] = _tOwned[recipient].add(tTransferAmount) (#1137)
- _tOwned[recipient] = _tOwned[recipient].add(tTransferAmount) (#868)
Apply the check-effects-interactions pattern.

Additional information: link

Unable to verify that contract auditor is trusted: Certik, Quantstamp, Hacken, Solidity, Paladinsec, Openzeppelin, Verichains

Combination 1: Reentrancy vulnerabilities + Functions that send Ether to arbitraty destination. Usual for scams. May be justified by some complex mechanics (e.g. rebase, reflections). DYOR & manual audit are advised.

CoinToken.includeInReward(address) (#852-863) has costly operations inside a loop:
- _excluded.pop() (#859)
Use a local variable to hold the loop computation result.

Additional information: link

CoinToken.addLiquidity(uint256,uint256) (#1089-1102) ignores return value by uniswapV2Router.addLiquidityETH{value: ethAmount}(address(this),tokenAmount,0,0,owner(),block.timestamp) (#1094-1101)
Ensure that all the return values of the function calls are used.

Additional information: link

CoinToken.allowance(address,address).owner (#783) shadows:
- Ownable.owner() (#404-406) (function)
CoinToken._approve(address,address,uint256).owner (#994) shadows:
- Ownable.owner() (#404-406) (function)
Rename the local variables that shadow another component.

Additional information: link

CoinToken.constructor(string,string,uint256,uint256,uint256,uint256,uint256,uint256,address,address).tokenOwner (#724) lacks a zero-check on :
- _owner = tokenOwner (#752)
Check that the address is not zero.

Additional information: link

Redundant expression "this (#237)" inContext (#231-240)
Remove redundant statements if they congest code but offer no value.

Additional information: link

Low level call in Address._functionCallWithValue(address,bytes,uint256,string) (#357-378):
- (success,returndata) = target.call{value: weiValue}(data) (#361)
Low level call in Address.sendValue(address,uint256) (#291-297):
- (success) = recipient.call{value: amount}() (#295)
Avoid low-level calls. Check the call success. If the call is meant for a contract, check for code existence

Additional information: link

CoinToken.setLiquidityFeePercent(uint256) (#887-889) should emit an event for:
- _liquidityFee = liquidityFee (#888)
CoinToken.setNumTokensSellToAddToLiquidity(uint256) (#891-893) should emit an event for:
- numTokensSellToAddToLiquidity = swapNumber * 10 ** _decimals (#892)
CoinToken.setMaxTxPercent(uint256) (#895-897) should emit an event for:
- _maxTxAmount = maxTxPercent * 10 ** _decimals (#896)
CoinToken.setTaxFeePercent(uint256) (#883-885) should emit an event for:
- _taxFee = taxFee (#884)
Emit an event for critical parameter changes.

Additional information: link

Reentrancy in CoinToken.swapAndLiquify(uint256) (#1048-1069):
External calls:
- swapTokensForEth(half) (#1060)
- uniswapV2Router.swapExactTokensForETHSupportingFeeOnTransferTokens(tokenAmount,0,path,address(this),block.timestamp) (#1080-1086)
- addLiquidity(otherHalf,newBalance) (#1066)
- uniswapV2Router.addLiquidityETH{value: ethAmount}(address(this),tokenAmount,0,0,owner(),block.timestamp) (#1094-1101)
External calls sending eth:
- addLiquidity(otherHalf,newBalance) (#1066)
- uniswapV2Router.addLiquidityETH{value: ethAmount}(address(this),tokenAmount,0,0,owner(),block.timestamp) (#1094-1101)
State variables written after the call(s):
- addLiquidity(otherHalf,newBalance) (#1066)
- _allowances[owner][spender] = amount (#998)
Reentrancy in CoinToken._transfer(address,address,uint256) (#1002-1046):
External calls:
- swapAndLiquify(contractTokenBalance) (#1033)
- uniswapV2Router.addLiquidityETH{value: ethAmount}(address(this),tokenAmount,0,0,owner(),block.timestamp) (#1094-1101)
- uniswapV2Router.swapExactTokensForETHSupportingFeeOnTransferTokens(tokenAmount,0,path,address(this),block.timestamp) (#1080-1086)
External calls sending eth:
- swapAndLiquify(contractTokenBalance) (#1033)
- uniswapV2Router.addLiquidityETH{value: ethAmount}(address(this),tokenAmount,0,0,owner(),block.timestamp) (#1094-1101)
State variables written after the call(s):
- _tokenTransfer(from,to,amount,takeFee) (#1045)
- _liquidityFee = _previousLiquidityFee (#987)
- _liquidityFee = 0 (#982)
- _tokenTransfer(from,to,amount,takeFee) (#1045)
- _previousLiquidityFee = _liquidityFee (#979)
- _tokenTransfer(from,to,amount,takeFee) (#1045)
- _previousTaxFee = _taxFee (#978)
- _tokenTransfer(from,to,amount,takeFee) (#1045)
- _tFeeTotal = _tFeeTotal.add(tFee) (#909)
- _tokenTransfer(from,to,amount,takeFee) (#1045)
- _taxFee = _previousTaxFee (#986)
- _taxFee = 0 (#981)
Reentrancy in CoinToken.transferFrom(address,address,uint256) (#792-796):
External calls:
- _transfer(sender,recipient,amount) (#793)
- uniswapV2Router.addLiquidityETH{value: ethAmount}(address(this),tokenAmount,0,0,owner(),block.timestamp) (#1094-1101)
- uniswapV2Router.swapExactTokensForETHSupportingFeeOnTransferTokens(tokenAmount,0,path,address(this),block.timestamp) (#1080-1086)
External calls sending eth:
- _transfer(sender,recipient,amount) (#793)
- uniswapV2Router.addLiquidityETH{value: ethAmount}(address(this),tokenAmount,0,0,owner(),block.timestamp) (#1094-1101)
State variables written after the call(s):
- _approve(sender,_msgSender(),_allowances[sender][_msgSender()].sub(amount,ERC20: transfer amount exceeds allowance)) (#794)
- _allowances[owner][spender] = amount (#998)
Apply the check-effects-interactions pattern.

Additional information: link

Reentrancy in CoinToken.transferFrom(address,address,uint256) (#792-796):
External calls:
- _transfer(sender,recipient,amount) (#793)
- uniswapV2Router.addLiquidityETH{value: ethAmount}(address(this),tokenAmount,0,0,owner(),block.timestamp) (#1094-1101)
- uniswapV2Router.swapExactTokensForETHSupportingFeeOnTransferTokens(tokenAmount,0,path,address(this),block.timestamp) (#1080-1086)
External calls sending eth:
- _transfer(sender,recipient,amount) (#793)
- uniswapV2Router.addLiquidityETH{value: ethAmount}(address(this),tokenAmount,0,0,owner(),block.timestamp) (#1094-1101)
Event emitted after the call(s):
- Approval(owner,spender,amount) (#999)
- _approve(sender,_msgSender(),_allowances[sender][_msgSender()].sub(amount,ERC20: transfer amount exceeds allowance)) (#794)
Reentrancy in CoinToken._transfer(address,address,uint256) (#1002-1046):
External calls:
- swapAndLiquify(contractTokenBalance) (#1033)
- uniswapV2Router.addLiquidityETH{value: ethAmount}(address(this),tokenAmount,0,0,owner(),block.timestamp) (#1094-1101)
- uniswapV2Router.swapExactTokensForETHSupportingFeeOnTransferTokens(tokenAmount,0,path,address(this),block.timestamp) (#1080-1086)
External calls sending eth:
- swapAndLiquify(contractTokenBalance) (#1033)
- uniswapV2Router.addLiquidityETH{value: ethAmount}(address(this),tokenAmount,0,0,owner(),block.timestamp) (#1094-1101)
Event emitted after the call(s):
- Transfer(sender,recipient,tTransferAmount) (#1131)
- _tokenTransfer(from,to,amount,takeFee) (#1045)
- Transfer(sender,recipient,tTransferAmount) (#1151)
- _tokenTransfer(from,to,amount,takeFee) (#1045)
- Transfer(sender,recipient,tTransferAmount) (#1141)
- _tokenTransfer(from,to,amount,takeFee) (#1045)
- Transfer(sender,recipient,tTransferAmount) (#872)
- _tokenTransfer(from,to,amount,takeFee) (#1045)
Reentrancy in CoinToken.swapAndLiquify(uint256) (#1048-1069):
External calls:
- swapTokensForEth(half) (#1060)
- uniswapV2Router.swapExactTokensForETHSupportingFeeOnTransferTokens(tokenAmount,0,path,address(this),block.timestamp) (#1080-1086)
- addLiquidity(otherHalf,newBalance) (#1066)
- uniswapV2Router.addLiquidityETH{value: ethAmount}(address(this),tokenAmount,0,0,owner(),block.timestamp) (#1094-1101)
External calls sending eth:
- addLiquidity(otherHalf,newBalance) (#1066)
- uniswapV2Router.addLiquidityETH{value: ethAmount}(address(this),tokenAmount,0,0,owner(),block.timestamp) (#1094-1101)
Event emitted after the call(s):
- Approval(owner,spender,amount) (#999)
- addLiquidity(otherHalf,newBalance) (#1066)
- SwapAndLiquify(half,newBalance,otherHalf) (#1068)
Apply the check-effects-interactions pattern.

Additional information: link

Ownable.unlock() (#451-456) uses timestamp for comparisons
Dangerous comparisons:
- require(bool,string)(now > _lockTime,Contract is locked until 7 days) (#453)
Avoid relying on block.timestamp.

Additional information: link

Address.isContract(address) (#264-273) uses assembly
- INLINE ASM (#271)
Address._functionCallWithValue(address,bytes,uint256,string) (#357-378) uses assembly
- INLINE ASM (#370-373)
Do not use evm assembly.

Additional information: link

Address.sendValue(address,uint256) (#291-297) is never used and should be removed
Address.functionCallWithValue(address,bytes,uint256) (#342-344) is never used and should be removed
SafeMath.mod(uint256,uint256,string) (#225-228) is never used and should be removed
Address.functionCallWithValue(address,bytes,uint256,string) (#352-355) is never used and should be removed
Context._msgData() (#236-239) is never used and should be removed
SafeMath.mod(uint256,uint256) (#209-211) is never used and should be removed
Address._functionCallWithValue(address,bytes,uint256,string) (#357-378) is never used and should be removed
Address.isContract(address) (#264-273) is never used and should be removed
Address.functionCall(address,bytes,string) (#327-329) is never used and should be removed
Address.functionCall(address,bytes) (#317-319) is never used and should be removed
Remove unused functions.

Additional information: link

Function IUniswapV2Pair.PERMIT_TYPEHASH() (#496) is not in mixedCase
Function IUniswapV2Pair.MINIMUM_LIQUIDITY() (#513) is not in mixedCase
Variable CoinToken._liquidityFee (#698) is not in mixedCase
Function IUniswapV2Pair.DOMAIN_SEPARATOR() (#495) is not in mixedCase
Parameter CoinToken.setSwapAndLiquifyEnabled(bool)._enabled (#899) is not in mixedCase
Variable CoinToken._maxTxAmount (#707) is not in mixedCase
Parameter CoinToken.calculateLiquidityFee(uint256)._amount (#969) is not in mixedCase
Variable Ownable._owner (#394) is not in mixedCase
Variable CoinToken._taxFee (#695) is not in mixedCase
Function IUniswapV2Router01.WETH() (#535) is not in mixedCase
Parameter CoinToken.calculateTaxFee(uint256)._amount (#963) is not in mixedCase
Follow the Solidity naming convention.

Additional information: link

Variable CoinToken._getRValues(uint256,uint256,uint256,uint256).rTransferAmount (#929) is too similar to CoinToken._transferToExcluded(address,address,uint256).tTransferAmount (#1135)
Variable CoinToken._transferStandard(address,address,uint256).rTransferAmount (#1126) is too similar to CoinToken._getValues(uint256).tTransferAmount (#913)
Variable CoinToken._getValues(uint256).rTransferAmount (#914) is too similar to CoinToken._transferStandard(address,address,uint256).tTransferAmount (#1126)
Variable CoinToken._getValues(uint256).rTransferAmount (#914) is too similar to CoinToken._transferBothExcluded(address,address,uint256).tTransferAmount (#865)
Variable CoinToken._getRValues(uint256,uint256,uint256,uint256).rTransferAmount (#929) is too similar to CoinToken._transferStandard(address,address,uint256).tTransferAmount (#1126)
Variable CoinToken._transferToExcluded(address,address,uint256).rTransferAmount (#1135) is too similar to CoinToken._getValues(uint256).tTransferAmount (#913)
Variable CoinToken.reflectionFromToken(uint256,bool).rTransferAmount (#831) is too similar to CoinToken._transferToExcluded(address,address,uint256).tTransferAmount (#1135)
Variable CoinToken._getValues(uint256).rTransferAmount (#914) is too similar to CoinToken._transferToExcluded(address,address,uint256).tTransferAmount (#1135)
Variable CoinToken.reflectionFromToken(uint256,bool).rTransferAmount (#831) is too similar to CoinToken._getTValues(uint256).tTransferAmount (#921)
Variable CoinToken._getValues(uint256).rTransferAmount (#914) is too similar to CoinToken._getTValues(uint256).tTransferAmount (#921)
Variable CoinToken._transferStandard(address,address,uint256).rTransferAmount (#1126) is too similar to CoinToken._transferFromExcluded(address,address,uint256).tTransferAmount (#1145)
Variable CoinToken._transferStandard(address,address,uint256).rTransferAmount (#1126) is too similar to CoinToken._transferStandard(address,address,uint256).tTransferAmount (#1126)
Variable CoinToken.reflectionFromToken(uint256,bool).rTransferAmount (#831) is too similar to CoinToken._getValues(uint256).tTransferAmount (#913)
Variable CoinToken._transferFromExcluded(address,address,uint256).rTransferAmount (#1145) is too similar to CoinToken._transferBothExcluded(address,address,uint256).tTransferAmount (#865)
Variable CoinToken._transferBothExcluded(address,address,uint256).rTransferAmount (#865) is too similar to CoinToken._transferBothExcluded(address,address,uint256).tTransferAmount (#865)
Variable CoinToken._transferToExcluded(address,address,uint256).rTransferAmount (#1135) is too similar to CoinToken._transferStandard(address,address,uint256).tTransferAmount (#1126)
Variable CoinToken._transferStandard(address,address,uint256).rTransferAmount (#1126) is too similar to CoinToken._transferToExcluded(address,address,uint256).tTransferAmount (#1135)
Variable CoinToken._transferToExcluded(address,address,uint256).rTransferAmount (#1135) is too similar to CoinToken._getTValues(uint256).tTransferAmount (#921)
Variable CoinToken._transferStandard(address,address,uint256).rTransferAmount (#1126) is too similar to CoinToken._transferBothExcluded(address,address,uint256).tTransferAmount (#865)
Variable CoinToken._getValues(uint256).rTransferAmount (#914) is too similar to CoinToken._transferFromExcluded(address,address,uint256).tTransferAmount (#1145)
Variable CoinToken._getValues(uint256).rTransferAmount (#914) is too similar to CoinToken._getValues(uint256).tTransferAmount (#913)
Variable CoinToken.reflectionFromToken(uint256,bool).rTransferAmount (#831) is too similar to CoinToken._transferFromExcluded(address,address,uint256).tTransferAmount (#1145)
Variable CoinToken._transferStandard(address,address,uint256).rTransferAmount (#1126) is too similar to CoinToken._getTValues(uint256).tTransferAmount (#921)
Variable CoinToken._transferToExcluded(address,address,uint256).rTransferAmount (#1135) is too similar to CoinToken._transferBothExcluded(address,address,uint256).tTransferAmount (#865)
Variable CoinToken._transferBothExcluded(address,address,uint256).rTransferAmount (#865) is too similar to CoinToken._transferFromExcluded(address,address,uint256).tTransferAmount (#1145)
Variable CoinToken._getRValues(uint256,uint256,uint256,uint256).rTransferAmount (#929) is too similar to CoinToken._transferFromExcluded(address,address,uint256).tTransferAmount (#1145)
Variable IUniswapV2Router01.addLiquidity(address,address,uint256,uint256,uint256,uint256,address,uint256).amountADesired (#540) is too similar to IUniswapV2Router01.addLiquidity(address,address,uint256,uint256,uint256,uint256,address,uint256).amountBDesired (#541)
Variable CoinToken.reflectionFromToken(uint256,bool).rTransferAmount (#831) is too similar to CoinToken._transferStandard(address,address,uint256).tTransferAmount (#1126)
Variable CoinToken._getRValues(uint256,uint256,uint256,uint256).rTransferAmount (#929) is too similar to CoinToken._getTValues(uint256).tTransferAmount (#921)
Variable CoinToken._transferFromExcluded(address,address,uint256).rTransferAmount (#1145) is too similar to CoinToken._getTValues(uint256).tTransferAmount (#921)
Variable CoinToken._transferBothExcluded(address,address,uint256).rTransferAmount (#865) is too similar to CoinToken._getTValues(uint256).tTransferAmount (#921)
Variable CoinToken._transferFromExcluded(address,address,uint256).rTransferAmount (#1145) is too similar to CoinToken._getValues(uint256).tTransferAmount (#913)
Variable CoinToken._transferFromExcluded(address,address,uint256).rTransferAmount (#1145) is too similar to CoinToken._transferFromExcluded(address,address,uint256).tTransferAmount (#1145)
Variable CoinToken._transferBothExcluded(address,address,uint256).rTransferAmount (#865) is too similar to CoinToken._getValues(uint256).tTransferAmount (#913)
Variable CoinToken._getRValues(uint256,uint256,uint256,uint256).rTransferAmount (#929) is too similar to CoinToken._getValues(uint256).tTransferAmount (#913)
Variable CoinToken._transferBothExcluded(address,address,uint256).rTransferAmount (#865) is too similar to CoinToken._transferToExcluded(address,address,uint256).tTransferAmount (#1135)
Variable CoinToken._transferToExcluded(address,address,uint256).rTransferAmount (#1135) is too similar to CoinToken._transferFromExcluded(address,address,uint256).tTransferAmount (#1145)
Variable CoinToken._transferToExcluded(address,address,uint256).rTransferAmount (#1135) is too similar to CoinToken._transferToExcluded(address,address,uint256).tTransferAmount (#1135)
Variable CoinToken._transferBothExcluded(address,address,uint256).rTransferAmount (#865) is too similar to CoinToken._transferStandard(address,address,uint256).tTransferAmount (#1126)
Variable CoinToken.reflectionFromToken(uint256,bool).rTransferAmount (#831) is too similar to CoinToken._transferBothExcluded(address,address,uint256).tTransferAmount (#865)
Variable CoinToken._getRValues(uint256,uint256,uint256,uint256).rTransferAmount (#929) is too similar to CoinToken._transferBothExcluded(address,address,uint256).tTransferAmount (#865)
Variable CoinToken._transferFromExcluded(address,address,uint256).rTransferAmount (#1145) is too similar to CoinToken._transferToExcluded(address,address,uint256).tTransferAmount (#1135)
Variable CoinToken._transferFromExcluded(address,address,uint256).rTransferAmount (#1145) is too similar to CoinToken._transferStandard(address,address,uint256).tTransferAmount (#1126)
Prevent variables from having similar names.

Additional information: link

totalFees() should be declared external:
- CoinToken.totalFees() (#812-814)
renounceOwnership() should be declared external:
- Ownable.renounceOwnership() (#423-426)
totalSupply() should be declared external:
- CoinToken.totalSupply() (#769-771)
setSwapAndLiquifyEnabled(bool) should be declared external:
- CoinToken.setSwapAndLiquifyEnabled(bool) (#899-902)
includeInFee(address) should be declared external:
- CoinToken.includeInFee(address) (#879-881)
isExcludedFromReward(address) should be declared external:
- CoinToken.isExcludedFromReward(address) (#808-810)
approve(address,uint256) should be declared external:
- CoinToken.approve(address,uint256) (#787-790)
reflectionFromToken(uint256,bool) should be declared external:
- CoinToken.reflectionFromToken(uint256,bool) (#825-834)
excludeFromReward(address) should be declared external:
- CoinToken.excludeFromReward(address) (#842-850)
deliver(uint256) should be declared external:
- CoinToken.deliver(uint256) (#816-823)
setNumTokensSellToAddToLiquidity(uint256) should be declared external:
- CoinToken.setNumTokensSellToAddToLiquidity(uint256) (#891-893)
decreaseAllowance(address,uint256) should be declared external:
- CoinToken.decreaseAllowance(address,uint256) (#803-806)
excludeFromFee(address) should be declared external:
- CoinToken.excludeFromFee(address) (#875-877)
transferOwnership(address) should be declared external:
- Ownable.transferOwnership(address) (#432-436)
isExcludedFromFee(address) should be declared external:
- CoinToken.isExcludedFromFee(address) (#990-992)
geUnlockTime() should be declared external:
- Ownable.geUnlockTime() (#438-440)
transfer(address,uint256) should be declared external:
- CoinToken.transfer(address,uint256) (#778-781)
transferFrom(address,address,uint256) should be declared external:
- CoinToken.transferFrom(address,address,uint256) (#792-796)
decimals() should be declared external:
- CoinToken.decimals() (#765-767)
symbol() should be declared external:
- CoinToken.symbol() (#761-763)
unlock() should be declared external:
- Ownable.unlock() (#451-456)
increaseAllowance(address,uint256) should be declared external:
- CoinToken.increaseAllowance(address,uint256) (#798-801)
name() should be declared external:
- CoinToken.name() (#757-759)
allowance(address,address) should be declared external:
- CoinToken.allowance(address,address) (#783-785)
lock(uint256) should be declared external:
- Ownable.lock(uint256) (#443-448)
setMaxTxPercent(uint256) should be declared external:
- CoinToken.setMaxTxPercent(uint256) (#895-897)
claimTokens() should be declared external:
- CoinToken.claimTokens() (#959-961)
Use the external attribute for functions never called from the contract.

Additional information: link

Average 30d PancakeSwap volume is less than $100. Token is either dead or inactive.

Average 30d PancakeSwap liquidity is less than $100. Token is either dead or inactive.

Average 30d number of PancakeSwap swaps is less than 1. Token is either dead or inactive.

Average PancakeSwap trading volume, liqudity, number of swaps are extremely low. Token seems to be dead.

Token is deployed only at one blockchain

Contract has 10% buy tax and 10% sell tax.
Taxes are low and contract ownership is renounced.

BscScan page for the token does not contain additional info: website, socials, description, etc.

Additional information: link

Token is not listed at Mobula.Finance

Additional information: link

Unable to find token on CoinHunt

Additional information: link

Token has a considerable age, but average PancakeSwap 30d trading volume is low

Token has relatively low CoinGecko rank

Token has relatively low CoinMarketCap rank

Young tokens have high risks of price dump / death