SolarFullCycle Token Logo

SFC [SolarFullCycle] Token

About SFC

Listings

Token 2 years
CoinGecko 2 years
CoinMarketCap 2 years
white paper

Solar Full Cycle (SFC) is a tokenized utility platform for investors and the industry, dedicated to establishing the recycling of panel waste in the solar industry. While the number of solar panels currently being installed is a welcome move in the battle against global warming and climate change, the solar trend shall also see solar panel waste being generated that will pose one of the largest predictable environmental disasters.

In this backdrop, SFC brings a systematic network presence through the blockchain process that will obligate solar panel producers and power plant owners to responsibly recycle their solar panels; a drive that would also see a new generation of recycled solar panels emerging in the marketplace.

Also, Solar Full Cycle will receive carbon credits for it's work in recycling solar panels and will verifiably and transparently provide them to consumers via blockchain technology. The team has several decades of experience between them.

Laser Scorebeta Last Audit: 4 May 2022

report
Token is either risky or in presale. For presale 30+ is a fine score.

Anti-Scam

Links


Unable to find manual contract audit (e.g. Certik, PeckShield, Solidity...)

SolarFullCycle.addLiquidity(uint256,uint256) (SFC.sol#731-745) sends eth to arbitrary user
Dangerous calls:
- uniswapV2Router.addLiquidityETH{value: ethAmount}(address(this),tokenAmount,0,0,_liqWalletAddress,block.timestamp) (SFC.sol#736-743)
Ensure that an arbitrary user cannot withdraw unauthorized funds.

Additional information: link

Reentrancy in SolarFullCycle._transfer(address,address,uint256) (SFC.sol#614-688):
External calls:
- swapAndLiquify(contractTokenBalance) (SFC.sol#651)
- uniswapV2Router.addLiquidityETH{value: ethAmount}(address(this),tokenAmount,0,0,_liqWalletAddress,block.timestamp) (SFC.sol#736-743)
- uniswapV2Router.swapExactTokensForETHSupportingFeeOnTransferTokens(tokenAmount,0,path,address(this),block.timestamp) (SFC.sol#722-728)
External calls sending eth:
- swapAndLiquify(contractTokenBalance) (SFC.sol#651)
- uniswapV2Router.addLiquidityETH{value: ethAmount}(address(this),tokenAmount,0,0,_liqWalletAddress,block.timestamp) (SFC.sol#736-743)
State variables written after the call(s):
- _tokenTransfer(from,to,amount,takeFee) (SFC.sol#687)
- _rOwned[_devWalletAddress] = _rOwned[_devWalletAddress].add(rdev) (SFC.sol#573)
- _rOwned[address(this)] = _rOwned[address(this)].add(rLiquidity) (SFC.sol#565)
- _rOwned[sender] = _rOwned[sender].sub(rAmount) (SFC.sol#765)
- _rOwned[sender] = _rOwned[sender].sub(rAmount) (SFC.sol#775)
- _rOwned[sender] = _rOwned[sender].sub(rAmount) (SFC.sol#414)
- _rOwned[recipient] = _rOwned[recipient].add(rTransferAmount) (SFC.sol#766)
- _rOwned[sender] = _rOwned[sender].sub(rAmount) (SFC.sol#787)
- _rOwned[recipient] = _rOwned[recipient].add(rTransferAmount) (SFC.sol#777)
- _rOwned[recipient] = _rOwned[recipient].add(rTransferAmount) (SFC.sol#788)
- _rOwned[recipient] = _rOwned[recipient].add(rTransferAmount) (SFC.sol#416)
- _tokenTransfer(from,to,amount,takeFee) (SFC.sol#687)
- _rTotal = _rTotal.sub(rFee) (SFC.sol#518)
- _tokenTransfer(from,to,amount,takeFee) (SFC.sol#687)
- _tOwned[address(this)] = _tOwned[address(this)].add(tLiquidity) (SFC.sol#567)
- _tOwned[_devWalletAddress] = _tOwned[_devWalletAddress].add(tdev) (SFC.sol#575)
- _tOwned[sender] = _tOwned[sender].sub(tAmount) (SFC.sol#786)
- _tOwned[sender] = _tOwned[sender].sub(tAmount) (SFC.sol#413)
- _tOwned[recipient] = _tOwned[recipient].add(tTransferAmount) (SFC.sol#776)
- _tOwned[recipient] = _tOwned[recipient].add(tTransferAmount) (SFC.sol#415)
Apply the check-effects-interactions pattern.

Additional information: link

SolarFullCycle.withdrawalToken(address,uint256,address) (SFC.sol#806-810) ignores return value by token.transfer(to,_amount) (SFC.sol#808)
Use SafeERC20, or ensure that the transfer/transferFrom return value is checked.

Additional information: link


Combination 1: Reentrancy vulnerabilities + Functions that send Ether to arbitraty destination. Usual for scams. May be justified by some complex mechanics (e.g. rebase, reflections). DYOR & manual audit are advised.


Combination 2: Unchecked transfer + Functions that send Ether to arbitraty destination. Usual for scams. May be justified by some complex mechanics (e.g. rebase, reflections). DYOR & manual audit are advised.


Combination 3: Reentrancy vulnerabilities + Unchecked transfer vulnerability. Usual for scams. May be justified by some complex mechanics (e.g. rebase, reflections). DYOR & manual audit are advised.


Contract ownership is not renounced (belongs to a wallet)


Not a direct threat, but may indicate unreliable intentions of developer. Widespread names (e.g. Elon, King, Moon, Doge) are common among meme-tokens and scams. The allow to gain free hype and attract unexperienced investors.

SolarFullCycle.addLiquidity(uint256,uint256) (SFC.sol#731-745) ignores return value by uniswapV2Router.addLiquidityETH{value: ethAmount}(address(this),tokenAmount,0,0,_liqWalletAddress,block.timestamp) (SFC.sol#736-743)
Ensure that all the return values of the function calls are used.

Additional information: link

SolarFullCycle.allowance(address,address).owner (SFC.sol#339) shadows:
- Ownable.owner() (Ownable.sol#34-36) (function)
SolarFullCycle._approve(address,address,uint256).owner (SFC.sol#606) shadows:
- Ownable.owner() (Ownable.sol#34-36) (function)
Rename the local variables that shadow another component.

Additional information: link

SolarFullCycle.setBuyTaxFeePercent(uint256) (SFC.sol#431-434) should emit an event for:
- _buyTaxFee = taxFee (SFC.sol#432)
SolarFullCycle.setBuyDevFeePercent(uint256) (SFC.sol#436-439) should emit an event for:
- _buyDevFee = devFee (SFC.sol#437)
SolarFullCycle.setBuyLiquidityFeePercent(uint256) (SFC.sol#441-444) should emit an event for:
- _buyLiquidityFee = liquidityFee (SFC.sol#442)
SolarFullCycle.setSellTaxFeePercent(uint256) (SFC.sol#446-449) should emit an event for:
- _sellTaxFee = taxFee (SFC.sol#447)
SolarFullCycle.setSellDevFeePercent(uint256) (SFC.sol#451-454) should emit an event for:
- _sellDevFee = devFee (SFC.sol#452)
SolarFullCycle.setSellLiquidityFeePercent(uint256) (SFC.sol#456-459) should emit an event for:
- _sellLiquidityFee = liquidityFee (SFC.sol#457)
SolarFullCycle.setMaxTxPercent(uint256) (SFC.sol#461-465) should emit an event for:
- _maxTxAmount = _tTotal.mul(maxTxPercent).div(10 ** 2) (SFC.sol#462-464)
Emit an event for critical parameter changes.

Additional information: link

SolarFullCycle.constructor(address,address,address).devWallet (SFC.sol#297) lacks a zero-check on :
- _devWalletAddress = devWallet (SFC.sol#301)
SolarFullCycle.constructor(address,address,address).liqWallet (SFC.sol#297) lacks a zero-check on :
- _liqWalletAddress = liqWallet (SFC.sol#302)
SolarFullCycle.withdrawalBNB(uint256,address).to (SFC.sol#812) lacks a zero-check on :
- address(to).transfer(_amount) (SFC.sol#814)
Check that the address is not zero.

Additional information: link

Reentrancy in SolarFullCycle._setRouter(address) (SFC.sol#500-508):
External calls:
- uniswapV2Pair = IUniswapV2Factory(_uniswapV2Router.factory()).createPair(address(this),_uniswapV2Router.WETH()) (SFC.sol#504)
State variables written after the call(s):
- setIsPair(uniswapV2Pair,true) (SFC.sol#506)
- _isPair[_address] = value (SFC.sol#796)
- uniswapV2Router = _uniswapV2Router (SFC.sol#505)
Reentrancy in SolarFullCycle._transfer(address,address,uint256) (SFC.sol#614-688):
External calls:
- swapAndLiquify(contractTokenBalance) (SFC.sol#651)
- uniswapV2Router.addLiquidityETH{value: ethAmount}(address(this),tokenAmount,0,0,_liqWalletAddress,block.timestamp) (SFC.sol#736-743)
- uniswapV2Router.swapExactTokensForETHSupportingFeeOnTransferTokens(tokenAmount,0,path,address(this),block.timestamp) (SFC.sol#722-728)
External calls sending eth:
- swapAndLiquify(contractTokenBalance) (SFC.sol#651)
- uniswapV2Router.addLiquidityETH{value: ethAmount}(address(this),tokenAmount,0,0,_liqWalletAddress,block.timestamp) (SFC.sol#736-743)
State variables written after the call(s):
- _devFee = _buyDevFee (SFC.sol#675)
- _devFee = _sellDevFee (SFC.sol#682)
- _tokenTransfer(from,to,amount,takeFee) (SFC.sol#687)
- _devFee = 0 (SFC.sol#598)
- _liquidityFee = _buyLiquidityFee (SFC.sol#676)
- _liquidityFee = _sellLiquidityFee (SFC.sol#683)
- _tokenTransfer(from,to,amount,takeFee) (SFC.sol#687)
- _liquidityFee = 0 (SFC.sol#599)
- _tokenTransfer(from,to,amount,takeFee) (SFC.sol#687)
- _tFeeTotal = _tFeeTotal.add(tFee) (SFC.sol#519)
- _taxFee = _buyTaxFee (SFC.sol#674)
- _taxFee = _sellTaxFee (SFC.sol#681)
- _tokenTransfer(from,to,amount,takeFee) (SFC.sol#687)
- _taxFee = 0 (SFC.sol#597)
Reentrancy in SolarFullCycle.constructor(address,address,address) (SFC.sol#297-311):
External calls:
- _setRouter(router) (SFC.sol#300)
- uniswapV2Pair = IUniswapV2Factory(_uniswapV2Router.factory()).createPair(address(this),_uniswapV2Router.WETH()) (SFC.sol#504)
State variables written after the call(s):
- _devWalletAddress = devWallet (SFC.sol#301)
- _isExcludedFromFee[owner()] = true (SFC.sol#305)
- _isExcludedFromFee[devWallet] = true (SFC.sol#306)
- _isExcludedFromFee[liqWallet] = true (SFC.sol#307)
- _isExcludedFromFee[address(this)] = true (SFC.sol#308)
- _liqWalletAddress = liqWallet (SFC.sol#302)
Reentrancy in SolarFullCycle.swapAndLiquify(uint256) (SFC.sol#690-711):
External calls:
- swapTokensForEth(half) (SFC.sol#702)
- uniswapV2Router.swapExactTokensForETHSupportingFeeOnTransferTokens(tokenAmount,0,path,address(this),block.timestamp) (SFC.sol#722-728)
- addLiquidity(otherHalf,newBalance) (SFC.sol#708)
- uniswapV2Router.addLiquidityETH{value: ethAmount}(address(this),tokenAmount,0,0,_liqWalletAddress,block.timestamp) (SFC.sol#736-743)
External calls sending eth:
- addLiquidity(otherHalf,newBalance) (SFC.sol#708)
- uniswapV2Router.addLiquidityETH{value: ethAmount}(address(this),tokenAmount,0,0,_liqWalletAddress,block.timestamp) (SFC.sol#736-743)
State variables written after the call(s):
- addLiquidity(otherHalf,newBalance) (SFC.sol#708)
- _allowances[owner][spender] = amount (SFC.sol#610)
Reentrancy in SolarFullCycle.transferFrom(address,address,uint256) (SFC.sol#348-352):
External calls:
- _transfer(sender,recipient,amount) (SFC.sol#349)
- uniswapV2Router.addLiquidityETH{value: ethAmount}(address(this),tokenAmount,0,0,_liqWalletAddress,block.timestamp) (SFC.sol#736-743)
- uniswapV2Router.swapExactTokensForETHSupportingFeeOnTransferTokens(tokenAmount,0,path,address(this),block.timestamp) (SFC.sol#722-728)
External calls sending eth:
- _transfer(sender,recipient,amount) (SFC.sol#349)
- uniswapV2Router.addLiquidityETH{value: ethAmount}(address(this),tokenAmount,0,0,_liqWalletAddress,block.timestamp) (SFC.sol#736-743)
State variables written after the call(s):
- _approve(sender,_msgSender(),_allowances[sender][_msgSender()].sub(amount,ERC20: transfer amount exceeds allowance)) (SFC.sol#350)
- _allowances[owner][spender] = amount (SFC.sol#610)
Apply the check-effects-interactions pattern.

Additional information: link

Reentrancy in SolarFullCycle._setRouter(address) (SFC.sol#500-508):
External calls:
- uniswapV2Pair = IUniswapV2Factory(_uniswapV2Router.factory()).createPair(address(this),_uniswapV2Router.WETH()) (SFC.sol#504)
Event emitted after the call(s):
- RouterSet(_router) (SFC.sol#507)
- SetIsPair(_address,value) (SFC.sol#797)
- setIsPair(uniswapV2Pair,true) (SFC.sol#506)
Reentrancy in SolarFullCycle._transfer(address,address,uint256) (SFC.sol#614-688):
External calls:
- swapAndLiquify(contractTokenBalance) (SFC.sol#651)
- uniswapV2Router.addLiquidityETH{value: ethAmount}(address(this),tokenAmount,0,0,_liqWalletAddress,block.timestamp) (SFC.sol#736-743)
- uniswapV2Router.swapExactTokensForETHSupportingFeeOnTransferTokens(tokenAmount,0,path,address(this),block.timestamp) (SFC.sol#722-728)
External calls sending eth:
- swapAndLiquify(contractTokenBalance) (SFC.sol#651)
- uniswapV2Router.addLiquidityETH{value: ethAmount}(address(this),tokenAmount,0,0,_liqWalletAddress,block.timestamp) (SFC.sol#736-743)
Event emitted after the call(s):
- Transfer(sender,recipient,tTransferAmount) (SFC.sol#770)
- _tokenTransfer(from,to,amount,takeFee) (SFC.sol#687)
- Transfer(sender,recipient,tTransferAmount) (SFC.sol#792)
- _tokenTransfer(from,to,amount,takeFee) (SFC.sol#687)
- Transfer(sender,recipient,tTransferAmount) (SFC.sol#781)
- _tokenTransfer(from,to,amount,takeFee) (SFC.sol#687)
- Transfer(sender,recipient,tTransferAmount) (SFC.sol#420)
- _tokenTransfer(from,to,amount,takeFee) (SFC.sol#687)
Reentrancy in SolarFullCycle.addLiquidity(uint256,uint256) (SFC.sol#731-745):
External calls:
- uniswapV2Router.addLiquidityETH{value: ethAmount}(address(this),tokenAmount,0,0,_liqWalletAddress,block.timestamp) (SFC.sol#736-743)
Event emitted after the call(s):
- Transfer(address(this),uniswapV2Pair,tokenAmount) (SFC.sol#744)
Reentrancy in SolarFullCycle.constructor(address,address,address) (SFC.sol#297-311):
External calls:
- _setRouter(router) (SFC.sol#300)
- uniswapV2Pair = IUniswapV2Factory(_uniswapV2Router.factory()).createPair(address(this),_uniswapV2Router.WETH()) (SFC.sol#504)
Event emitted after the call(s):
- Transfer(address(0),owner(),_tTotal) (SFC.sol#310)
Reentrancy in SolarFullCycle.swapAndLiquify(uint256) (SFC.sol#690-711):
External calls:
- swapTokensForEth(half) (SFC.sol#702)
- uniswapV2Router.swapExactTokensForETHSupportingFeeOnTransferTokens(tokenAmount,0,path,address(this),block.timestamp) (SFC.sol#722-728)
- addLiquidity(otherHalf,newBalance) (SFC.sol#708)
- uniswapV2Router.addLiquidityETH{value: ethAmount}(address(this),tokenAmount,0,0,_liqWalletAddress,block.timestamp) (SFC.sol#736-743)
External calls sending eth:
- addLiquidity(otherHalf,newBalance) (SFC.sol#708)
- uniswapV2Router.addLiquidityETH{value: ethAmount}(address(this),tokenAmount,0,0,_liqWalletAddress,block.timestamp) (SFC.sol#736-743)
Event emitted after the call(s):
- Approval(owner,spender,amount) (SFC.sol#611)
- addLiquidity(otherHalf,newBalance) (SFC.sol#708)
- SwapAndLiquify(half,newBalance,otherHalf) (SFC.sol#710)
- Transfer(address(this),uniswapV2Pair,tokenAmount) (SFC.sol#744)
- addLiquidity(otherHalf,newBalance) (SFC.sol#708)
Reentrancy in SolarFullCycle.transferFrom(address,address,uint256) (SFC.sol#348-352):
External calls:
- _transfer(sender,recipient,amount) (SFC.sol#349)
- uniswapV2Router.addLiquidityETH{value: ethAmount}(address(this),tokenAmount,0,0,_liqWalletAddress,block.timestamp) (SFC.sol#736-743)
- uniswapV2Router.swapExactTokensForETHSupportingFeeOnTransferTokens(tokenAmount,0,path,address(this),block.timestamp) (SFC.sol#722-728)
External calls sending eth:
- _transfer(sender,recipient,amount) (SFC.sol#349)
- uniswapV2Router.addLiquidityETH{value: ethAmount}(address(this),tokenAmount,0,0,_liqWalletAddress,block.timestamp) (SFC.sol#736-743)
Event emitted after the call(s):
- Approval(owner,spender,amount) (SFC.sol#611)
- _approve(sender,_msgSender(),_allowances[sender][_msgSender()].sub(amount,ERC20: transfer amount exceeds allowance)) (SFC.sol#350)
Reentrancy in SolarFullCycle.withdrawalToken(address,uint256,address) (SFC.sol#806-810):
External calls:
- token.transfer(to,_amount) (SFC.sol#808)
Event emitted after the call(s):
- WithdrawalToken(_tokenAddr,_amount,to) (SFC.sol#809)
Apply the check-effects-interactions pattern.

Additional information: link

SolarFullCycle.includeInReward(address) (SFC.sol#398-409) has costly operations inside a loop:
- _excluded.pop() (SFC.sol#405)
Use a local variable to hold the loop computation result.

Additional information: link

Function IUniswapV2Pair.DOMAIN_SEPARATOR() (SFC.sol#42) is not in mixedCase
Function IUniswapV2Pair.PERMIT_TYPEHASH() (SFC.sol#43) is not in mixedCase
Function IUniswapV2Pair.MINIMUM_LIQUIDITY() (SFC.sol#60) is not in mixedCase
Function IUniswapV2Router01.WETH() (SFC.sol#80) is not in mixedCase
Parameter SolarFullCycle.setSwapAndLiquifyEnabled(bool)._enabled (SFC.sol#467) is not in mixedCase
Parameter SolarFullCycle.setSwapEnabled(bool)._enabled (SFC.sol#472) is not in mixedCase
Parameter SolarFullCycle.setDevWalletAddress(address)._address (SFC.sol#477) is not in mixedCase
Parameter SolarFullCycle.setLiqWalletAddress(address)._address (SFC.sol#483) is not in mixedCase
Parameter SolarFullCycle.setNumTokensSellToAddToLiquidity(uint256)._amount (SFC.sol#489) is not in mixedCase
Parameter SolarFullCycle.setContractFeesEnabled(bool)._bool (SFC.sol#495) is not in mixedCase
Parameter SolarFullCycle.setRouter(address)._router (SFC.sol#510) is not in mixedCase
Parameter SolarFullCycle.calculateTaxFee(uint256)._amount (SFC.sol#578) is not in mixedCase
Parameter SolarFullCycle.calculateDevFee(uint256)._amount (SFC.sol#584) is not in mixedCase
Parameter SolarFullCycle.calculateLiquidityFee(uint256)._amount (SFC.sol#590) is not in mixedCase
Parameter SolarFullCycle.setIsPair(address,bool)._address (SFC.sol#795) is not in mixedCase
Parameter SolarFullCycle.setIsBanned(address,bool)._address (SFC.sol#800) is not in mixedCase
Parameter SolarFullCycle.withdrawalToken(address,uint256,address)._tokenAddr (SFC.sol#806) is not in mixedCase
Parameter SolarFullCycle.withdrawalToken(address,uint256,address)._amount (SFC.sol#806) is not in mixedCase
Parameter SolarFullCycle.withdrawalBNB(uint256,address)._amount (SFC.sol#812) is not in mixedCase
Variable SolarFullCycle._isPair (SFC.sol#226) is not in mixedCase
Variable SolarFullCycle._isBanned (SFC.sol#229) is not in mixedCase
Constant SolarFullCycle._tTotal (SFC.sol#232) is not in UPPER_CASE_WITH_UNDERSCORES
Constant SolarFullCycle._name (SFC.sol#236) is not in UPPER_CASE_WITH_UNDERSCORES
Constant SolarFullCycle._symbol (SFC.sol#237) is not in UPPER_CASE_WITH_UNDERSCORES
Constant SolarFullCycle._decimals (SFC.sol#238) is not in UPPER_CASE_WITH_UNDERSCORES
Variable SolarFullCycle._devWalletAddress (SFC.sol#241) is not in mixedCase
Variable SolarFullCycle._liqWalletAddress (SFC.sol#242) is not in mixedCase
Variable SolarFullCycle._buyTaxFee (SFC.sol#247) is not in mixedCase
Variable SolarFullCycle._buyDevFee (SFC.sol#248) is not in mixedCase
Variable SolarFullCycle._buyLiquidityFee (SFC.sol#249) is not in mixedCase
Variable SolarFullCycle._sellTaxFee (SFC.sol#252) is not in mixedCase
Variable SolarFullCycle._sellDevFee (SFC.sol#253) is not in mixedCase
Variable SolarFullCycle._sellLiquidityFee (SFC.sol#254) is not in mixedCase
Variable SolarFullCycle._contractFeesEnabled (SFC.sol#261) is not in mixedCase
Variable SolarFullCycle._maxTxAmount (SFC.sol#270) is not in mixedCase
Follow the Solidity naming convention.

Additional information: link

Reentrancy in SolarFullCycle.withdrawalBNB(uint256,address) (SFC.sol#812-816):
External calls:
- address(to).transfer(_amount) (SFC.sol#814)
Event emitted after the call(s):
- WithdrawalBNB(_amount,to) (SFC.sol#815)
Apply the check-effects-interactions pattern.

Additional information: link

Variable IUniswapV2Router01.addLiquidity(address,address,uint256,uint256,uint256,uint256,address,uint256).amountADesired (SFC.sol#85) is too similar to IUniswapV2Router01.addLiquidity(address,address,uint256,uint256,uint256,uint256,address,uint256).amountBDesired (SFC.sol#86)
Variable SolarFullCycle._transferStandard(address,address,uint256).rTransferAmount (SFC.sol#764) is too similar to SolarFullCycle._getValues(uint256).tTransferAmount (SFC.sol#523)
Variable SolarFullCycle._getValues(uint256).rTransferAmount (SFC.sol#524) is too similar to SolarFullCycle._transferToExcluded(address,address,uint256).tTransferAmount (SFC.sol#774)
Variable SolarFullCycle._transferFromExcluded(address,address,uint256).rTransferAmount (SFC.sol#785) is too similar to SolarFullCycle._transferToExcluded(address,address,uint256).tTransferAmount (SFC.sol#774)
Variable SolarFullCycle._transferToExcluded(address,address,uint256).rTransferAmount (SFC.sol#774) is too similar to SolarFullCycle._transferToExcluded(address,address,uint256).tTransferAmount (SFC.sol#774)
Variable SolarFullCycle.reflectionFromToken(uint256,bool).rTransferAmount (SFC.sol#378) is too similar to SolarFullCycle._transferFromExcluded(address,address,uint256).tTransferAmount (SFC.sol#785)
Variable SolarFullCycle.reflectionFromToken(uint256,bool).rTransferAmount (SFC.sol#378) is too similar to SolarFullCycle._transferBothExcluded(address,address,uint256).tTransferAmount (SFC.sol#412)
Variable SolarFullCycle._getValues(uint256).rTransferAmount (SFC.sol#524) is too similar to SolarFullCycle._getValues(uint256).tTransferAmount (SFC.sol#523)
Variable SolarFullCycle._transferBothExcluded(address,address,uint256).rTransferAmount (SFC.sol#412) is too similar to SolarFullCycle._transferToExcluded(address,address,uint256).tTransferAmount (SFC.sol#774)
Variable SolarFullCycle._transferFromExcluded(address,address,uint256).rTransferAmount (SFC.sol#785) is too similar to SolarFullCycle._getValues(uint256).tTransferAmount (SFC.sol#523)
Variable SolarFullCycle.reflectionFromToken(uint256,bool).rTransferAmount (SFC.sol#378) is too similar to SolarFullCycle._getTValues(uint256).tTransferAmount (SFC.sol#532)
Variable SolarFullCycle._transferToExcluded(address,address,uint256).rTransferAmount (SFC.sol#774) is too similar to SolarFullCycle._getValues(uint256).tTransferAmount (SFC.sol#523)
Variable SolarFullCycle._transferBothExcluded(address,address,uint256).rTransferAmount (SFC.sol#412) is too similar to SolarFullCycle._getValues(uint256).tTransferAmount (SFC.sol#523)
Variable SolarFullCycle._getRValues(uint256,uint256,uint256,uint256,uint256).rTransferAmount (SFC.sol#541) is too similar to SolarFullCycle._transferFromExcluded(address,address,uint256).tTransferAmount (SFC.sol#785)
Variable SolarFullCycle._transferStandard(address,address,uint256).rTransferAmount (SFC.sol#764) is too similar to SolarFullCycle._transferBothExcluded(address,address,uint256).tTransferAmount (SFC.sol#412)
Variable SolarFullCycle._transferStandard(address,address,uint256).rTransferAmount (SFC.sol#764) is too similar to SolarFullCycle._transferFromExcluded(address,address,uint256).tTransferAmount (SFC.sol#785)
Variable SolarFullCycle.reflectionFromToken(uint256,bool).rTransferAmount (SFC.sol#378) is too similar to SolarFullCycle._transferStandard(address,address,uint256).tTransferAmount (SFC.sol#764)
Variable SolarFullCycle._getValues(uint256).rTransferAmount (SFC.sol#524) is too similar to SolarFullCycle._transferFromExcluded(address,address,uint256).tTransferAmount (SFC.sol#785)
Variable SolarFullCycle._getValues(uint256).rTransferAmount (SFC.sol#524) is too similar to SolarFullCycle._transferBothExcluded(address,address,uint256).tTransferAmount (SFC.sol#412)
Variable SolarFullCycle.reflectionFromToken(uint256,bool).rTransferAmount (SFC.sol#378) is too similar to SolarFullCycle._transferToExcluded(address,address,uint256).tTransferAmount (SFC.sol#774)
Variable SolarFullCycle._transferFromExcluded(address,address,uint256).rTransferAmount (SFC.sol#785) is too similar to SolarFullCycle._transferFromExcluded(address,address,uint256).tTransferAmount (SFC.sol#785)
Variable SolarFullCycle._transferToExcluded(address,address,uint256).rTransferAmount (SFC.sol#774) is too similar to SolarFullCycle._transferFromExcluded(address,address,uint256).tTransferAmount (SFC.sol#785)
Variable SolarFullCycle._getValues(uint256).rTransferAmount (SFC.sol#524) is too similar to SolarFullCycle._getTValues(uint256).tTransferAmount (SFC.sol#532)
Variable SolarFullCycle._transferStandard(address,address,uint256).rTransferAmount (SFC.sol#764) is too similar to SolarFullCycle._transferStandard(address,address,uint256).tTransferAmount (SFC.sol#764)
Variable SolarFullCycle.reflectionFromToken(uint256,bool).rTransferAmount (SFC.sol#378) is too similar to SolarFullCycle._getValues(uint256).tTransferAmount (SFC.sol#523)
Variable SolarFullCycle._transferBothExcluded(address,address,uint256).rTransferAmount (SFC.sol#412) is too similar to SolarFullCycle._transferFromExcluded(address,address,uint256).tTransferAmount (SFC.sol#785)
Variable SolarFullCycle._transferBothExcluded(address,address,uint256).rTransferAmount (SFC.sol#412) is too similar to SolarFullCycle._transferBothExcluded(address,address,uint256).tTransferAmount (SFC.sol#412)
Variable SolarFullCycle._getRValues(uint256,uint256,uint256,uint256,uint256).rTransferAmount (SFC.sol#541) is too similar to SolarFullCycle._transferToExcluded(address,address,uint256).tTransferAmount (SFC.sol#774)
Variable SolarFullCycle._transferStandard(address,address,uint256).rTransferAmount (SFC.sol#764) is too similar to SolarFullCycle._transferToExcluded(address,address,uint256).tTransferAmount (SFC.sol#774)
Variable SolarFullCycle._getValues(uint256).rTransferAmount (SFC.sol#524) is too similar to SolarFullCycle._transferStandard(address,address,uint256).tTransferAmount (SFC.sol#764)
Variable SolarFullCycle._getRValues(uint256,uint256,uint256,uint256,uint256).rTransferAmount (SFC.sol#541) is too similar to SolarFullCycle._getValues(uint256).tTransferAmount (SFC.sol#523)
Variable SolarFullCycle._transferToExcluded(address,address,uint256).rTransferAmount (SFC.sol#774) is too similar to SolarFullCycle._transferStandard(address,address,uint256).tTransferAmount (SFC.sol#764)
Variable SolarFullCycle._transferStandard(address,address,uint256).rTransferAmount (SFC.sol#764) is too similar to SolarFullCycle._getTValues(uint256).tTransferAmount (SFC.sol#532)
Variable SolarFullCycle._getRValues(uint256,uint256,uint256,uint256,uint256).rTransferAmount (SFC.sol#541) is too similar to SolarFullCycle._transferStandard(address,address,uint256).tTransferAmount (SFC.sol#764)
Variable SolarFullCycle._transferToExcluded(address,address,uint256).rTransferAmount (SFC.sol#774) is too similar to SolarFullCycle._getTValues(uint256).tTransferAmount (SFC.sol#532)
Variable SolarFullCycle._transferToExcluded(address,address,uint256).rTransferAmount (SFC.sol#774) is too similar to SolarFullCycle._transferBothExcluded(address,address,uint256).tTransferAmount (SFC.sol#412)
Variable SolarFullCycle._getRValues(uint256,uint256,uint256,uint256,uint256).rTransferAmount (SFC.sol#541) is too similar to SolarFullCycle._getTValues(uint256).tTransferAmount (SFC.sol#532)
Variable SolarFullCycle._transferFromExcluded(address,address,uint256).rTransferAmount (SFC.sol#785) is too similar to SolarFullCycle._transferStandard(address,address,uint256).tTransferAmount (SFC.sol#764)
Variable SolarFullCycle._getRValues(uint256,uint256,uint256,uint256,uint256).rTransferAmount (SFC.sol#541) is too similar to SolarFullCycle._transferBothExcluded(address,address,uint256).tTransferAmount (SFC.sol#412)
Variable SolarFullCycle._transferBothExcluded(address,address,uint256).rTransferAmount (SFC.sol#412) is too similar to SolarFullCycle._transferStandard(address,address,uint256).tTransferAmount (SFC.sol#764)
Variable SolarFullCycle._transferFromExcluded(address,address,uint256).rTransferAmount (SFC.sol#785) is too similar to SolarFullCycle._getTValues(uint256).tTransferAmount (SFC.sol#532)
Variable SolarFullCycle._transferBothExcluded(address,address,uint256).rTransferAmount (SFC.sol#412) is too similar to SolarFullCycle._getTValues(uint256).tTransferAmount (SFC.sol#532)
Variable SolarFullCycle._transferFromExcluded(address,address,uint256).rTransferAmount (SFC.sol#785) is too similar to SolarFullCycle._transferBothExcluded(address,address,uint256).tTransferAmount (SFC.sol#412)
Prevent variables from having similar names.

Additional information: link

renounceOwnership() should be declared external:
- Ownable.renounceOwnership() (Ownable.sol#53-55)
transferOwnership(address) should be declared external:
- Ownable.transferOwnership(address) (Ownable.sol#61-64)
excludeFromReward(address) should be declared external:
- SolarFullCycle.excludeFromReward(address) (SFC.sol#389-396)
Use the external attribute for functions never called from the contract.

Additional information: link

Address.isContract(address) (Address.sol#26-36) uses assembly
- INLINE ASM (Address.sol#32-34)
Address.verifyCallResult(bool,bytes,string) (Address.sol#195-215) uses assembly
- INLINE ASM (Address.sol#207-210)
Do not use evm assembly.

Additional information: link

Address.functionCall(address,bytes) (Address.sol#79-81) is never used and should be removed
Address.functionCall(address,bytes,string) (Address.sol#89-95) is never used and should be removed
Address.functionCallWithValue(address,bytes,uint256) (Address.sol#108-114) is never used and should be removed
Address.functionCallWithValue(address,bytes,uint256,string) (Address.sol#122-133) is never used and should be removed
Address.functionDelegateCall(address,bytes) (Address.sol#168-170) is never used and should be removed
Address.functionDelegateCall(address,bytes,string) (Address.sol#178-187) is never used and should be removed
Address.functionStaticCall(address,bytes) (Address.sol#141-143) is never used and should be removed
Address.functionStaticCall(address,bytes,string) (Address.sol#151-160) is never used and should be removed
Address.sendValue(address,uint256) (Address.sol#54-59) is never used and should be removed
Address.verifyCallResult(bool,bytes,string) (Address.sol#195-215) is never used and should be removed
Context._msgData() (Context.sol#20-22) is never used and should be removed
SafeMath.div(uint256,uint256,string) (SafeMath.sol#190-199) is never used and should be removed
SafeMath.mod(uint256,uint256) (SafeMath.sol#150-152) is never used and should be removed
SafeMath.mod(uint256,uint256,string) (SafeMath.sol#216-225) is never used and should be removed
SafeMath.tryAdd(uint256,uint256) (SafeMath.sol#21-27) is never used and should be removed
SafeMath.tryDiv(uint256,uint256) (SafeMath.sol#63-68) is never used and should be removed
SafeMath.tryMod(uint256,uint256) (SafeMath.sol#75-80) is never used and should be removed
SafeMath.tryMul(uint256,uint256) (SafeMath.sol#46-56) is never used and should be removed
SafeMath.trySub(uint256,uint256) (SafeMath.sol#34-39) is never used and should be removed
Remove unused functions.

Additional information: link

Low level call in Address.sendValue(address,uint256) (Address.sol#54-59):
- (success) = recipient.call{value: amount}() (Address.sol#57)
Low level call in Address.functionCallWithValue(address,bytes,uint256,string) (Address.sol#122-133):
- (success,returndata) = target.call{value: value}(data) (Address.sol#131)
Low level call in Address.functionStaticCall(address,bytes,string) (Address.sol#151-160):
- (success,returndata) = target.staticcall(data) (Address.sol#158)
Low level call in Address.functionDelegateCall(address,bytes,string) (Address.sol#178-187):
- (success,returndata) = target.delegatecall(data) (Address.sol#185)
Avoid low-level calls. Check the call success. If the call is meant for a contract, check for code existence

Additional information: link

Holders:

Contract has 4% buy tax and 7% sell tax.
Taxes are low but contract ownership is not renounced. Token has a high risk of becoming a honeypot.


Average 30d number of PancakeSwap swaps is low.


Number of Binance Smart Chain (BSC) token holders is low.


Token is deployed only at one blockchain

No disclosed threats


Unable to find token contract audit


Unable to find audit link on the website


Unable to find token on CoinHunt

Additional information: link


Young tokens have high risks of price dump / death


Young tokens have high risks of price dump / death


Token has relatively low CoinGecko rank


Young tokens have high risks of price dump / death


Young tokens have high risks of price dump / death


Young tokens have high risks of price dump / death

Price for SFC

News for SFC