SeTC [SNAFU] Token

Unable to find manual contract audit (e.g. Certik, PeckShield, Solidity...)

SNAFU._swapAndLiquify() (#1399-1435) sends eth to arbitrary user
Dangerous calls:
- (success) = address(dividendTracker).call{value: amountBNBHolders}() (#1431)
SNAFU._addLiquidity(uint256,uint256) (#1449-1459) sends eth to arbitrary user
Dangerous calls:
- uniswapV2Router.addLiquidityETH{value: ethAmount}(address(this),tokenAmount,0,0,liquidityWallet,block.timestamp) (#1451-1458)
Ensure that an arbitrary user cannot withdraw unauthorized funds.

Additional information: link

Reentrancy in SNAFU._transfer(address,address,uint256) (#1131-1215):
External calls:
- _swapAndLiquify() (#1182)
- uniswapV2Router.addLiquidityETH{value: ethAmount}(address(this),tokenAmount,0,0,liquidityWallet,block.timestamp) (#1451-1458)
- uniswapV2Router.swapExactTokensForETHSupportingFeeOnTransferTokens(tokenAmount,0,path,address(this),block.timestamp) (#1441-1447)
- stakingSuccess = IERC20(address(this)).transfer(address(stakingAddress),amountToStake) (#1426)
- (success) = address(dividendTracker).call{value: amountBNBHolders}() (#1431)
External calls sending eth:
- _swapAndLiquify() (#1182)
- uniswapV2Router.addLiquidityETH{value: ethAmount}(address(this),tokenAmount,0,0,liquidityWallet,block.timestamp) (#1451-1458)
- address(buyBackWallet).transfer(amountBNBBuyBack) (#1417)
- address(charityWallet).transfer(amountBNBCharity) (#1418)
- address(marketingWallet).transfer(amountBNBMarketing) (#1419)
- (success) = address(dividendTracker).call{value: amountBNBHolders}() (#1431)
State variables written after the call(s):
- super._transfer(from,address(this),fee) (#1194)
- _balances[sender] = _balances[sender].sub(amount,ERC20: transfer amount exceeds balance) (#497)
- _balances[recipient] = _balances[recipient].add(amount) (#498)
- super._transfer(from,to,amount) (#1203)
- _balances[sender] = _balances[sender].sub(amount,ERC20: transfer amount exceeds balance) (#497)
- _balances[recipient] = _balances[recipient].add(amount) (#498)
- _buyTimesInLaunch[to] = currentTimestamp (#1199)
- _swapping = false (#1183)
Reentrancy in DividendPayingToken._withdrawDividendOfUser(address) (#599-617):
External calls:
- (success) = user.call{gas: 3000,value: _withdrawableDividend}() (#605)
State variables written after the call(s):
- withdrawnDividends[user] = withdrawnDividends[user].sub(_withdrawableDividend) (#607)
Apply the check-effects-interactions pattern.

Additional information: link

SNAFU._name (#686) shadows:
- ERC20._name (#427)
SNAFU._symbol (#687) shadows:
- ERC20._symbol (#428)
Remove the state variable shadowing.

Additional information: link

Combination 1: Reentrancy vulnerabilities + Functions that send Ether to arbitraty destination. Usual for scams. May be justified by some complex mechanics (e.g. rebase, reflections). DYOR & manual audit are advised.

Reentrancy in SNAFU.updateDividendTracker(address) (#880-890):
External calls:
- newDividendTracker.excludeFromDividends(address(newDividendTracker)) (#884)
- newDividendTracker.excludeFromDividends(address(this)) (#885)
- newDividendTracker.excludeFromDividends(owner()) (#886)
- newDividendTracker.excludeFromDividends(address(uniswapV2Router)) (#887)
State variables written after the call(s):
- dividendTracker = newDividendTracker (#889)
Apply the check-effects-interactions pattern.

Additional information: link

SNAFU._transfer(address,address,uint256).iterations (#1210) is a local variable never initialized
SNAFU._transfer(address,address,uint256).claims (#1210) is a local variable never initialized
SNAFU._transfer(address,address,uint256).lastProcessedIndex (#1210) is a local variable never initialized
Initialize all the variables. If a variable is meant to be initialized to zero, explicitly set it to zero to improve code readability.

Additional information: link

SNAFU.claim() (#1035-1037) ignores return value by dividendTracker.processAccount(address(msg.sender),false) (#1036)
SNAFU._transfer(address,address,uint256) (#1131-1215) ignores return value by dividendTracker.process(gas) (#1210-1213)
SNAFU._addLiquidity(uint256,uint256) (#1449-1459) ignores return value by uniswapV2Router.addLiquidityETH{value: ethAmount}(address(this),tokenAmount,0,0,liquidityWallet,block.timestamp) (#1451-1458)
Ensure that all the return values of the function calls are used.

Additional information: link

DividendPayingToken.constructor(string,string)._name (#582) shadows:
- ERC20._name (#427) (state variable)
DividendPayingToken.constructor(string,string)._symbol (#582) shadows:
- ERC20._symbol (#428) (state variable)
DividendPayingToken.dividendOf(address)._owner (#635) shadows:
- Ownable._owner (#537) (state variable)
DividendPayingToken.withdrawableDividendOf(address)._owner (#638) shadows:
- Ownable._owner (#537) (state variable)
DividendPayingToken.withdrawnDividendOf(address)._owner (#641) shadows:
- Ownable._owner (#537) (state variable)
DividendPayingToken.accumulativeDividendOf(address)._owner (#644) shadows:
- Ownable._owner (#537) (state variable)
SNAFU._adjustTaxes(bool,bool,bool).isInLaunch (#1216) shadows:
- SNAFU.isInLaunch() (#1069-1080) (function)
Rename the local variables that shadow another component.

Additional information: link

DividendPayingToken._withdrawDividendOfUser(address) (#599-617) has external calls inside a loop: (success) = user.call{gas: 3000,value: _withdrawableDividend}() (#605)
DividendPayingToken.swapBNBForTokensAndWithdrawDividend(address,uint256) (#618-634) has external calls inside a loop: path[0] = uniswapV2Router.WETH() (#620)
DividendPayingToken.swapBNBForTokensAndWithdrawDividend(address,uint256) (#618-634) has external calls inside a loop: uniswapV2Router.swapExactETHForTokensSupportingFeeOnTransferTokens{value: bnbAmount}(0,path,address(holder),block.timestamp) (#623-633)
Favor pull over push strategy for external calls.

Additional information: link

Variable 'SNAFU._transfer(address,address,uint256).iterations (#1210)' in SNAFU._transfer(address,address,uint256) (#1131-1215) potentially used before declaration: ProcessedDividendTracker(iterations,claims,lastProcessedIndex,true,gas,tx.origin) (#1211)
Variable 'SNAFU._transfer(address,address,uint256).lastProcessedIndex (#1210)' in SNAFU._transfer(address,address,uint256) (#1131-1215) potentially used before declaration: ProcessedDividendTracker(iterations,claims,lastProcessedIndex,true,gas,tx.origin) (#1211)
Variable 'SNAFU._transfer(address,address,uint256).claims (#1210)' in SNAFU._transfer(address,address,uint256) (#1131-1215) potentially used before declaration: ProcessedDividendTracker(iterations,claims,lastProcessedIndex,true,gas,tx.origin) (#1211)
Move all variable declarations prior to any usage of the variable, and ensure that reaching a variable declaration does not depend on some conditional if it is used unconditionally.

Additional information: link

Reentrancy in SNAFU._swapAndLiquify() (#1399-1435):
External calls:
- _swapTokensForBNB(amountToSwap) (#1407)
- uniswapV2Router.swapExactTokensForETHSupportingFeeOnTransferTokens(tokenAmount,0,path,address(this),block.timestamp) (#1441-1447)
- _addLiquidity(amountToLiquify,amountBNBLiquidity) (#1422)
- uniswapV2Router.addLiquidityETH{value: ethAmount}(address(this),tokenAmount,0,0,liquidityWallet,block.timestamp) (#1451-1458)
External calls sending eth:
- address(buyBackWallet).transfer(amountBNBBuyBack) (#1417)
- address(charityWallet).transfer(amountBNBCharity) (#1418)
- address(marketingWallet).transfer(amountBNBMarketing) (#1419)
- _addLiquidity(amountToLiquify,amountBNBLiquidity) (#1422)
- uniswapV2Router.addLiquidityETH{value: ethAmount}(address(this),tokenAmount,0,0,liquidityWallet,block.timestamp) (#1451-1458)
State variables written after the call(s):
- _addLiquidity(amountToLiquify,amountBNBLiquidity) (#1422)
- _allowances[owner][spender] = amount (#525)
Reentrancy in SNAFU.constructor() (#800-841):
External calls:
- dividendTracker.setUniswapRouter(0x10ED43C718714eb63d5aA57B78B54704E256024E) (#809)
- dividendTracker.setRewardToken(dividendToken) (#810)
- _uniswapV2Pair = IUniswapV2Factory(_uniswapV2Router.factory()).createPair(address(this),_uniswapV2Router.WETH()) (#813)
State variables written after the call(s):
- uniswapV2Pair = _uniswapV2Pair (#815)
- uniswapV2Router = _uniswapV2Router (#814)
Reentrancy in SNAFU.constructor() (#800-841):
External calls:
- dividendTracker.setUniswapRouter(0x10ED43C718714eb63d5aA57B78B54704E256024E) (#809)
- dividendTracker.setRewardToken(dividendToken) (#810)
- _uniswapV2Pair = IUniswapV2Factory(_uniswapV2Router.factory()).createPair(address(this),_uniswapV2Router.WETH()) (#813)
- _setAutomatedMarketMakerPair(_uniswapV2Pair,true) (#816)
- dividendTracker.excludeFromDividends(pair) (#895)
State variables written after the call(s):
- _isExcludedFromFee[owner()] = true (#818)
- _isExcludedFromFee[stakingAddress] = true (#819)
- _isExcludedFromFee[address(this)] = true (#820)
- _isExcludedFromFee[address(dividendTracker)] = true (#821)
Reentrancy in SNAFU.constructor() (#800-841):
External calls:
- dividendTracker.setUniswapRouter(0x10ED43C718714eb63d5aA57B78B54704E256024E) (#809)
- dividendTracker.setRewardToken(dividendToken) (#810)
- _uniswapV2Pair = IUniswapV2Factory(_uniswapV2Router.factory()).createPair(address(this),_uniswapV2Router.WETH()) (#813)
- _setAutomatedMarketMakerPair(_uniswapV2Pair,true) (#816)
- dividendTracker.excludeFromDividends(pair) (#895)
- dividendTracker.excludeFromDividends(address(dividendTracker)) (#823)
- dividendTracker.excludeFromDividends(address(this)) (#824)
- dividendTracker.excludeFromDividends(address(0x000000000000000000000000000000000000dEaD)) (#825)
- dividendTracker.excludeFromDividends(owner()) (#826)
- dividendTracker.excludeFromDividends(address(_uniswapV2Router)) (#827)
State variables written after the call(s):
- _mint(owner(),initialSupply) (#840)
- _balances[account] = _balances[account].add(amount) (#506)
- _isExcludedFromMaxTransactionLimit[address(dividendTracker)] = true (#829)
- _isExcludedFromMaxTransactionLimit[address(this)] = true (#830)
- _isExcludedFromMaxTransactionLimit[stakingAddress] = true (#831)
- _isExcludedFromMaxWalletLimit[_uniswapV2Pair] = true (#833)
- _isExcludedFromMaxWalletLimit[address(dividendTracker)] = true (#834)
- _isExcludedFromMaxWalletLimit[address(uniswapV2Router)] = true (#835)
- _isExcludedFromMaxWalletLimit[address(this)] = true (#836)
- _isExcludedFromMaxWalletLimit[owner()] = true (#837)
- _isExcludedFromMaxWalletLimit[stakingAddress] = true (#838)
- _mint(owner(),initialSupply) (#840)
- _totalSupply = _totalSupply.add(amount) (#505)
Reentrancy in SNAFUDividendTracker.processAccount(address,bool) (#1615-1623):
External calls:
- amount = _withdrawDividendOfUser(account) (#1616)
- uniswapV2Router.swapExactETHForTokensSupportingFeeOnTransferTokens{value: bnbAmount}(0,path,address(holder),block.timestamp) (#623-633)
- (success) = user.call{gas: 3000,value: _withdrawableDividend}() (#605)
State variables written after the call(s):
- lastClaimTimes[account] = block.timestamp (#1618)
Reentrancy in DividendPayingToken.swapBNBForTokensAndWithdrawDividend(address,uint256) (#618-634):
External calls:
- uniswapV2Router.swapExactETHForTokensSupportingFeeOnTransferTokens{value: bnbAmount}(0,path,address(holder),block.timestamp) (#623-633)
State variables written after the call(s):
- withdrawnDividends[holder] = withdrawnDividends[holder].sub(bnbAmount) (#631)
Apply the check-effects-interactions pattern.

Additional information: link

SNAFU._blockedTimeLimit (#751) should be constant
SNAFU._decimals (#688) should be constant
Add the constant attributes to state variables that never change.

Additional information: link

Reentrancy in SNAFU._setAutomatedMarketMakerPair(address,bool) (#891-898):
External calls:
- dividendTracker.excludeFromDividends(pair) (#895)
Event emitted after the call(s):
- AutomatedMarketMakerPairChange(pair,value) (#897)
Reentrancy in SNAFU._swapAndLiquify() (#1399-1435):
External calls:
- _swapTokensForBNB(amountToSwap) (#1407)
- uniswapV2Router.swapExactTokensForETHSupportingFeeOnTransferTokens(tokenAmount,0,path,address(this),block.timestamp) (#1441-1447)
- _addLiquidity(amountToLiquify,amountBNBLiquidity) (#1422)
- uniswapV2Router.addLiquidityETH{value: ethAmount}(address(this),tokenAmount,0,0,liquidityWallet,block.timestamp) (#1451-1458)
External calls sending eth:
- address(buyBackWallet).transfer(amountBNBBuyBack) (#1417)
- address(charityWallet).transfer(amountBNBCharity) (#1418)
- address(marketingWallet).transfer(amountBNBMarketing) (#1419)
- _addLiquidity(amountToLiquify,amountBNBLiquidity) (#1422)
- uniswapV2Router.addLiquidityETH{value: ethAmount}(address(this),tokenAmount,0,0,liquidityWallet,block.timestamp) (#1451-1458)
Event emitted after the call(s):
- Approval(owner,spender,amount) (#526)
- _addLiquidity(amountToLiquify,amountBNBLiquidity) (#1422)
- SwapAndLiquify(amountToSwap,amountBNBLiquidity,amountToLiquify) (#1423)
Reentrancy in SNAFU._swapAndLiquify() (#1399-1435):
External calls:
- _swapTokensForBNB(amountToSwap) (#1407)
- uniswapV2Router.swapExactTokensForETHSupportingFeeOnTransferTokens(tokenAmount,0,path,address(this),block.timestamp) (#1441-1447)
- _addLiquidity(amountToLiquify,amountBNBLiquidity) (#1422)
- uniswapV2Router.addLiquidityETH{value: ethAmount}(address(this),tokenAmount,0,0,liquidityWallet,block.timestamp) (#1451-1458)
- stakingSuccess = IERC20(address(this)).transfer(address(stakingAddress),amountToStake) (#1426)
External calls sending eth:
- address(buyBackWallet).transfer(amountBNBBuyBack) (#1417)
- address(charityWallet).transfer(amountBNBCharity) (#1418)
- address(marketingWallet).transfer(amountBNBMarketing) (#1419)
- _addLiquidity(amountToLiquify,amountBNBLiquidity) (#1422)
- uniswapV2Router.addLiquidityETH{value: ethAmount}(address(this),tokenAmount,0,0,liquidityWallet,block.timestamp) (#1451-1458)
Event emitted after the call(s):
- StakingTokensSent(amountToStake) (#1428)
Reentrancy in SNAFU._swapAndLiquify() (#1399-1435):
External calls:
- _swapTokensForBNB(amountToSwap) (#1407)
- uniswapV2Router.swapExactTokensForETHSupportingFeeOnTransferTokens(tokenAmount,0,path,address(this),block.timestamp) (#1441-1447)
- _addLiquidity(amountToLiquify,amountBNBLiquidity) (#1422)
- uniswapV2Router.addLiquidityETH{value: ethAmount}(address(this),tokenAmount,0,0,liquidityWallet,block.timestamp) (#1451-1458)
- stakingSuccess = IERC20(address(this)).transfer(address(stakingAddress),amountToStake) (#1426)
- (success) = address(dividendTracker).call{value: amountBNBHolders}() (#1431)
External calls sending eth:
- address(buyBackWallet).transfer(amountBNBBuyBack) (#1417)
- address(charityWallet).transfer(amountBNBCharity) (#1418)
- address(marketingWallet).transfer(amountBNBMarketing) (#1419)
- _addLiquidity(amountToLiquify,amountBNBLiquidity) (#1422)
- uniswapV2Router.addLiquidityETH{value: ethAmount}(address(this),tokenAmount,0,0,liquidityWallet,block.timestamp) (#1451-1458)
- (success) = address(dividendTracker).call{value: amountBNBHolders}() (#1431)
Event emitted after the call(s):
- DividendsSent(amountBNBHolders) (#1433)
Reentrancy in SNAFU._transfer(address,address,uint256) (#1131-1215):
External calls:
- _swapAndLiquify() (#1182)
- uniswapV2Router.addLiquidityETH{value: ethAmount}(address(this),tokenAmount,0,0,liquidityWallet,block.timestamp) (#1451-1458)
- uniswapV2Router.swapExactTokensForETHSupportingFeeOnTransferTokens(tokenAmount,0,path,address(this),block.timestamp) (#1441-1447)
- stakingSuccess = IERC20(address(this)).transfer(address(stakingAddress),amountToStake) (#1426)
- (success) = address(dividendTracker).call{value: amountBNBHolders}() (#1431)
External calls sending eth:
- _swapAndLiquify() (#1182)
- uniswapV2Router.addLiquidityETH{value: ethAmount}(address(this),tokenAmount,0,0,liquidityWallet,block.timestamp) (#1451-1458)
- address(buyBackWallet).transfer(amountBNBBuyBack) (#1417)
- address(charityWallet).transfer(amountBNBCharity) (#1418)
- address(marketingWallet).transfer(amountBNBMarketing) (#1419)
- (success) = address(dividendTracker).call{value: amountBNBHolders}() (#1431)
Event emitted after the call(s):
- Transfer(sender,recipient,amount) (#499)
- super._transfer(from,to,amount) (#1203)
- Transfer(sender,recipient,amount) (#499)
- super._transfer(from,address(this),fee) (#1194)
Reentrancy in SNAFU._transfer(address,address,uint256) (#1131-1215):
External calls:
- _swapAndLiquify() (#1182)
- uniswapV2Router.addLiquidityETH{value: ethAmount}(address(this),tokenAmount,0,0,liquidityWallet,block.timestamp) (#1451-1458)
- uniswapV2Router.swapExactTokensForETHSupportingFeeOnTransferTokens(tokenAmount,0,path,address(this),block.timestamp) (#1441-1447)
- stakingSuccess = IERC20(address(this)).transfer(address(stakingAddress),amountToStake) (#1426)
- (success) = address(dividendTracker).call{value: amountBNBHolders}() (#1431)
- dividendTracker.setBalance(address(from),balanceOf(from)) (#1205)
- dividendTracker.setBalance(address(to),balanceOf(to)) (#1206)
- dividendTracker.process(gas) (#1210-1213)
External calls sending eth:
- _swapAndLiquify() (#1182)
- uniswapV2Router.addLiquidityETH{value: ethAmount}(address(this),tokenAmount,0,0,liquidityWallet,block.timestamp) (#1451-1458)
- address(buyBackWallet).transfer(amountBNBBuyBack) (#1417)
- address(charityWallet).transfer(amountBNBCharity) (#1418)
- address(marketingWallet).transfer(amountBNBMarketing) (#1419)
- (success) = address(dividendTracker).call{value: amountBNBHolders}() (#1431)
Event emitted after the call(s):
- ProcessedDividendTracker(iterations,claims,lastProcessedIndex,true,gas,tx.origin) (#1211)
Reentrancy in SNAFU.claimBNBOverflow(uint256) (#1042-1048):
External calls:
- (success) = address(owner()).call{value: amount}() (#1044)
Event emitted after the call(s):
- ClaimBNBOverflow(amount) (#1046)
Reentrancy in SNAFU.constructor() (#800-841):
External calls:
- dividendTracker.setUniswapRouter(0x10ED43C718714eb63d5aA57B78B54704E256024E) (#809)
- dividendTracker.setRewardToken(dividendToken) (#810)
- _uniswapV2Pair = IUniswapV2Factory(_uniswapV2Router.factory()).createPair(address(this),_uniswapV2Router.WETH()) (#813)
- _setAutomatedMarketMakerPair(_uniswapV2Pair,true) (#816)
- dividendTracker.excludeFromDividends(pair) (#895)
Event emitted after the call(s):
- AutomatedMarketMakerPairChange(pair,value) (#897)
- _setAutomatedMarketMakerPair(_uniswapV2Pair,true) (#816)
Reentrancy in SNAFU.constructor() (#800-841):
External calls:
- dividendTracker.setUniswapRouter(0x10ED43C718714eb63d5aA57B78B54704E256024E) (#809)
- dividendTracker.setRewardToken(dividendToken) (#810)
- _uniswapV2Pair = IUniswapV2Factory(_uniswapV2Router.factory()).createPair(address(this),_uniswapV2Router.WETH()) (#813)
- _setAutomatedMarketMakerPair(_uniswapV2Pair,true) (#816)
- dividendTracker.excludeFromDividends(pair) (#895)
- dividendTracker.excludeFromDividends(address(dividendTracker)) (#823)
- dividendTracker.excludeFromDividends(address(this)) (#824)
- dividendTracker.excludeFromDividends(address(0x000000000000000000000000000000000000dEaD)) (#825)
- dividendTracker.excludeFromDividends(owner()) (#826)
- dividendTracker.excludeFromDividends(address(_uniswapV2Router)) (#827)
Event emitted after the call(s):
- Transfer(address(0),account,amount) (#507)
- _mint(owner(),initialSupply) (#840)
Reentrancy in SNAFUDividendTracker.processAccount(address,bool) (#1615-1623):
External calls:
- amount = _withdrawDividendOfUser(account) (#1616)
- uniswapV2Router.swapExactETHForTokensSupportingFeeOnTransferTokens{value: bnbAmount}(0,path,address(holder),block.timestamp) (#623-633)
- (success) = user.call{gas: 3000,value: _withdrawableDividend}() (#605)
Event emitted after the call(s):
- Claim(account,amount,automatic) (#1619)
Reentrancy in SNAFU.processDividendTracker(uint256) (#1038-1041):
External calls:
- (iterations,claims,lastProcessedIndex) = dividendTracker.process(gas) (#1039)
Event emitted after the call(s):
- ProcessedDividendTracker(iterations,claims,lastProcessedIndex,false,gas,tx.origin) (#1040)
Reentrancy in SNAFU.updateDividendTracker(address) (#880-890):
External calls:
- newDividendTracker.excludeFromDividends(address(newDividendTracker)) (#884)
- newDividendTracker.excludeFromDividends(address(this)) (#885)
- newDividendTracker.excludeFromDividends(owner()) (#886)
- newDividendTracker.excludeFromDividends(address(uniswapV2Router)) (#887)
Event emitted after the call(s):
- DividendTrackerChange(newAddress,address(dividendTracker)) (#888)
Apply the check-effects-interactions pattern.

Additional information: link

SNAFU.blockAccount(address) (#917-925) uses timestamp for comparisons
Dangerous comparisons:
- require(bool,string)((currentTimestamp - _launchStartTimestamp) < _blockedTimeLimit,SNAFU: Time to block accounts has expired) (#921)
SNAFU.isInGoldenHour() (#1059-1068) uses timestamp for comparisons
Dangerous comparisons:
- timeSinceGolden < totalGoldenTime (#1063)
- ! isTradingEnabled && _tradingPausedTimestamp > _goldenHourStartTimestamp (#1060)
SNAFU.isInLaunch() (#1069-1080) uses timestamp for comparisons
Dangerous comparisons:
- _isLaunched && (timeSinceLaunch < totalLaunchTime || blocksSinceLaunch < _launch1.blocksInPeriod) (#1075)
- ! isTradingEnabled && _tradingPausedTimestamp > _launchStartTimestamp (#1070)
SNAFU._transfer(address,address,uint256) (#1131-1215) uses timestamp for comparisons
Dangerous comparisons:
- _isInLaunch && (currentTimestamp - _launchStartTimestamp) <= 300 && isBuyFromLp (#1154)
- require(bool,string)((currentTimestamp - _buyTimesInLaunch[to]) > 60,SNAFU: Cannot buy more than once per min in first 5min of launch) (#1155)
- _isInLaunch && (currentTimestamp - _launchStartTimestamp) <= 300 (#1197)
- to != owner() && isBuyFromLp && (currentTimestamp - _buyTimesInLaunch[to]) > 60 (#1198)
- ! isTradingEnabled && _tradingPausedTimestamp > _launchStartTimestamp (#1148)
SNAFU._adjustTaxes(bool,bool,bool) (#1216-1332) uses timestamp for comparisons
Dangerous comparisons:
- _isLaunched && timeSinceLaunch <= _launch2.timeInPeriod && blocksSinceLaunch > _launch1.blocksInPeriod (#1245)
- timeSinceGolden <= _golden1.timeInPeriod (#1262)
- timeSinceGolden > _golden1.timeInPeriod && timeSinceGolden <= (_golden1.timeInPeriod + _golden2.timeInPeriod) (#1270)
- _isLaunched && timeSinceLaunch <= _launch2.timeInPeriod && blocksSinceLaunch > _launch1.blocksInPeriod (#1296)
- timeSinceGolden <= _golden1.timeInPeriod (#1313)
- timeSinceGolden > _golden1.timeInPeriod && timeSinceGolden <= (_golden1.timeInPeriod + _golden2.timeInPeriod) (#1321)
- ! isTradingEnabled && _tradingPausedTimestamp > _launchStartTimestamp (#1218)
SNAFUDividendTracker.getAccount(address) (#1515-1543) uses timestamp for comparisons
Dangerous comparisons:
- nextClaimTime > block.timestamp (#1542)
SNAFUDividendTracker.canAutoClaim(uint256) (#1560-1565) uses timestamp for comparisons
Dangerous comparisons:
- lastClaimTime > block.timestamp (#1561)
- block.timestamp.sub(lastClaimTime) >= claimWait (#1564)
Avoid relying on block.timestamp.

Additional information: link

Context._msgData() (#10-13) is never used and should be removed
DividendPayingToken._transfer(address,address,uint256) (#648-653) is never used and should be removed
SafeMath.div(uint256,uint256) (#293-295) is never used and should be removed
SafeMath.div(uint256,uint256,string) (#297-303) is never used and should be removed
SafeMath.mod(uint256,uint256) (#305-307) is never used and should be removed
SafeMath.mod(uint256,uint256,string) (#309-312) is never used and should be removed
SafeMathInt.abs(int256) (#344-347) is never used and should be removed
SafeMathInt.div(int256,int256) (#327-333) is never used and should be removed
SafeMathInt.mul(int256,int256) (#319-326) is never used and should be removed
Remove unused functions.

Additional information: link

Pragma version^0.8.10 (#3) necessitates a version too recent to be trusted. Consider deploying with 0.6.12/0.7.6/0.8.7
solc-0.8.11 is not recommended for deployment
Deploy with any of the following Solidity versions: 0.5.16 - 0.5.17, 0.6.11 - 0.6.12, 0.7.5 - 0.7.6 Use a simple pragma version that allows any of these versions. Consider using the latest version of Solidity for testing.

Additional information: link

Low level call in DividendPayingToken._withdrawDividendOfUser(address) (#599-617):
- (success) = user.call{gas: 3000,value: _withdrawableDividend}() (#605)
Low level call in SNAFU.claimBNBOverflow(uint256) (#1042-1048):
- (success) = address(owner()).call{value: amount}() (#1044)
Low level call in SNAFU._swapAndLiquify() (#1399-1435):
- (success) = address(dividendTracker).call{value: amountBNBHolders}() (#1431)
Avoid low-level calls. Check the call success. If the call is meant for a contract, check for code existence

Additional information: link

Function IUniswapV2Router01.WETH() (#34) is not in mixedCase
Function IUniswapV2Pair.DOMAIN_SEPARATOR() (#182) is not in mixedCase
Function IUniswapV2Pair.PERMIT_TYPEHASH() (#183) is not in mixedCase
Function IUniswapV2Pair.MINIMUM_LIQUIDITY() (#200) is not in mixedCase
Parameter DividendPayingToken.dividendOf(address)._owner (#635) is not in mixedCase
Parameter DividendPayingToken.withdrawableDividendOf(address)._owner (#638) is not in mixedCase
Parameter DividendPayingToken.withdrawnDividendOf(address)._owner (#641) is not in mixedCase
Parameter DividendPayingToken.accumulativeDividendOf(address)._owner (#644) is not in mixedCase
Constant DividendPayingToken.magnitude (#573) is not in UPPER_CASE_WITH_UNDERSCORES
Parameter SNAFU.setBaseFeesOnBuy(uint256,uint256,uint256,uint256,uint256,uint256)._liquidityFeeOnBuy (#959) is not in mixedCase
Parameter SNAFU.setBaseFeesOnBuy(uint256,uint256,uint256,uint256,uint256,uint256)._marketingFeeOnBuy (#959) is not in mixedCase
Parameter SNAFU.setBaseFeesOnBuy(uint256,uint256,uint256,uint256,uint256,uint256)._buyBackFeeOnBuy (#959) is not in mixedCase
Parameter SNAFU.setBaseFeesOnBuy(uint256,uint256,uint256,uint256,uint256,uint256)._charityFeeOnBuy (#959) is not in mixedCase
Parameter SNAFU.setBaseFeesOnBuy(uint256,uint256,uint256,uint256,uint256,uint256)._stakingFeeOnBuy (#959) is not in mixedCase
Parameter SNAFU.setBaseFeesOnBuy(uint256,uint256,uint256,uint256,uint256,uint256)._holdersFeeOnBuy (#959) is not in mixedCase
Parameter SNAFU.setBaseFeesOnSell(uint256,uint256,uint256,uint256,uint256,uint256)._liquidityFeeOnSell (#963) is not in mixedCase
Parameter SNAFU.setBaseFeesOnSell(uint256,uint256,uint256,uint256,uint256,uint256)._marketingFeeOnSell (#963) is not in mixedCase
Parameter SNAFU.setBaseFeesOnSell(uint256,uint256,uint256,uint256,uint256,uint256)._buyBackFeeOnSell (#963) is not in mixedCase
Parameter SNAFU.setBaseFeesOnSell(uint256,uint256,uint256,uint256,uint256,uint256)._charityFeeOnSell (#963) is not in mixedCase
Parameter SNAFU.setBaseFeesOnSell(uint256,uint256,uint256,uint256,uint256,uint256)._stakingFeeOnSell (#963) is not in mixedCase
Parameter SNAFU.setBaseFeesOnSell(uint256,uint256,uint256,uint256,uint256,uint256)._holdersFeeOnSell (#963) is not in mixedCase
Parameter SNAFU.setLaunch2FeesOnBuy(uint256,uint256,uint256,uint256,uint256,uint256)._liquidityFeeOnBuy (#968) is not in mixedCase
Parameter SNAFU.setLaunch2FeesOnBuy(uint256,uint256,uint256,uint256,uint256,uint256)._marketingFeeOnBuy (#968) is not in mixedCase
Parameter SNAFU.setLaunch2FeesOnBuy(uint256,uint256,uint256,uint256,uint256,uint256)._buyBackFeeOnBuy (#968) is not in mixedCase
Parameter SNAFU.setLaunch2FeesOnBuy(uint256,uint256,uint256,uint256,uint256,uint256)._charityFeeOnBuy (#968) is not in mixedCase
Parameter SNAFU.setLaunch2FeesOnBuy(uint256,uint256,uint256,uint256,uint256,uint256)._stakingFeeOnBuy (#968) is not in mixedCase
Parameter SNAFU.setLaunch2FeesOnBuy(uint256,uint256,uint256,uint256,uint256,uint256)._holdersFeeOnBuy (#968) is not in mixedCase
Parameter SNAFU.setLaunch2FeesOnSell(uint256,uint256,uint256,uint256,uint256,uint256)._liquidityFeeOnSell (#972) is not in mixedCase
Parameter SNAFU.setLaunch2FeesOnSell(uint256,uint256,uint256,uint256,uint256,uint256)._marketingFeeOnSell (#972) is not in mixedCase
Parameter SNAFU.setLaunch2FeesOnSell(uint256,uint256,uint256,uint256,uint256,uint256)._buyBackFeeOnSell (#972) is not in mixedCase
Parameter SNAFU.setLaunch2FeesOnSell(uint256,uint256,uint256,uint256,uint256,uint256)._charityFeeOnSell (#972) is not in mixedCase
Parameter SNAFU.setLaunch2FeesOnSell(uint256,uint256,uint256,uint256,uint256,uint256)._stakingFeeOnSell (#972) is not in mixedCase
Parameter SNAFU.setLaunch2FeesOnSell(uint256,uint256,uint256,uint256,uint256,uint256)._holdersFeeOnSell (#972) is not in mixedCase
Parameter SNAFU.setLaunch3FeesOnBuy(uint256,uint256,uint256,uint256,uint256,uint256)._liquidityFeeOnBuy (#977) is not in mixedCase
Parameter SNAFU.setLaunch3FeesOnBuy(uint256,uint256,uint256,uint256,uint256,uint256)._marketingFeeOnBuy (#977) is not in mixedCase
Parameter SNAFU.setLaunch3FeesOnBuy(uint256,uint256,uint256,uint256,uint256,uint256)._buyBackFeeOnBuy (#977) is not in mixedCase
Parameter SNAFU.setLaunch3FeesOnBuy(uint256,uint256,uint256,uint256,uint256,uint256)._charityFeeOnBuy (#977) is not in mixedCase
Parameter SNAFU.setLaunch3FeesOnBuy(uint256,uint256,uint256,uint256,uint256,uint256)._stakingFeeOnBuy (#977) is not in mixedCase
Parameter SNAFU.setLaunch3FeesOnBuy(uint256,uint256,uint256,uint256,uint256,uint256)._holdersFeeOnBuy (#977) is not in mixedCase
Parameter SNAFU.setLaunch3FeesOnSell(uint256,uint256,uint256,uint256,uint256,uint256)._liquidityFeeOnSell (#981) is not in mixedCase
Parameter SNAFU.setLaunch3FeesOnSell(uint256,uint256,uint256,uint256,uint256,uint256)._marketingFeeOnSell (#981) is not in mixedCase
Parameter SNAFU.setLaunch3FeesOnSell(uint256,uint256,uint256,uint256,uint256,uint256)._buyBackFeeOnSell (#981) is not in mixedCase
Parameter SNAFU.setLaunch3FeesOnSell(uint256,uint256,uint256,uint256,uint256,uint256)._charityFeeOnSell (#981) is not in mixedCase
Parameter SNAFU.setLaunch3FeesOnSell(uint256,uint256,uint256,uint256,uint256,uint256)._stakingFeeOnSell (#981) is not in mixedCase
Parameter SNAFU.setLaunch3FeesOnSell(uint256,uint256,uint256,uint256,uint256,uint256)._holdersFeeOnSell (#981) is not in mixedCase
Parameter SNAFU.setGoldenHour1BuyFees(uint256,uint256,uint256,uint256,uint256,uint256)._liquidityFeeOnBuy (#986) is not in mixedCase
Parameter SNAFU.setGoldenHour1BuyFees(uint256,uint256,uint256,uint256,uint256,uint256)._marketingFeeOnBuy (#986) is not in mixedCase
Parameter SNAFU.setGoldenHour1BuyFees(uint256,uint256,uint256,uint256,uint256,uint256)._buyBackFeeOnBuy (#986) is not in mixedCase
Parameter SNAFU.setGoldenHour1BuyFees(uint256,uint256,uint256,uint256,uint256,uint256)._charityFeeOnBuy (#986) is not in mixedCase
Parameter SNAFU.setGoldenHour1BuyFees(uint256,uint256,uint256,uint256,uint256,uint256)._stakingFeeOnBuy (#986) is not in mixedCase
Parameter SNAFU.setGoldenHour1BuyFees(uint256,uint256,uint256,uint256,uint256,uint256)._holdersFeeOnBuy (#986) is not in mixedCase
Parameter SNAFU.setGoldenHour1SellFees(uint256,uint256,uint256,uint256,uint256,uint256)._liquidityFeeOnSell (#990) is not in mixedCase
Parameter SNAFU.setGoldenHour1SellFees(uint256,uint256,uint256,uint256,uint256,uint256)._marketingFeeOnSell (#990) is not in mixedCase
Parameter SNAFU.setGoldenHour1SellFees(uint256,uint256,uint256,uint256,uint256,uint256)._buyBackFeeOnSell (#990) is not in mixedCase
Parameter SNAFU.setGoldenHour1SellFees(uint256,uint256,uint256,uint256,uint256,uint256)._charityFeeOnSell (#990) is not in mixedCase
Parameter SNAFU.setGoldenHour1SellFees(uint256,uint256,uint256,uint256,uint256,uint256)._stakingFeeOnSell (#990) is not in mixedCase
Parameter SNAFU.setGoldenHour1SellFees(uint256,uint256,uint256,uint256,uint256,uint256)._holdersFeeOnSell (#990) is not in mixedCase
Parameter SNAFU.setGoldenHour2BuyFees(uint256,uint256,uint256,uint256,uint256,uint256)._liquidityFeeOnBuy (#995) is not in mixedCase
Parameter SNAFU.setGoldenHour2BuyFees(uint256,uint256,uint256,uint256,uint256,uint256)._marketingFeeOnBuy (#995) is not in mixedCase
Parameter SNAFU.setGoldenHour2BuyFees(uint256,uint256,uint256,uint256,uint256,uint256)._buyBackFeeOnBuy (#995) is not in mixedCase
Parameter SNAFU.setGoldenHour2BuyFees(uint256,uint256,uint256,uint256,uint256,uint256)._charityFeeOnBuy (#995) is not in mixedCase
Parameter SNAFU.setGoldenHour2BuyFees(uint256,uint256,uint256,uint256,uint256,uint256)._stakingFeeOnBuy (#995) is not in mixedCase
Parameter SNAFU.setGoldenHour2BuyFees(uint256,uint256,uint256,uint256,uint256,uint256)._holdersFeeOnBuy (#995) is not in mixedCase
Parameter SNAFU.setGoldenHour2SellFees(uint256,uint256,uint256,uint256,uint256,uint256)._liquidityFeeOnSell (#999) is not in mixedCase
Parameter SNAFU.setGoldenHour2SellFees(uint256,uint256,uint256,uint256,uint256,uint256)._marketingFeeOnSell (#999) is not in mixedCase
Parameter SNAFU.setGoldenHour2SellFees(uint256,uint256,uint256,uint256,uint256,uint256)._buyBackFeeOnSell (#999) is not in mixedCase
Parameter SNAFU.setGoldenHour2SellFees(uint256,uint256,uint256,uint256,uint256,uint256)._charityFeeOnSell (#999) is not in mixedCase
Parameter SNAFU.setGoldenHour2SellFees(uint256,uint256,uint256,uint256,uint256,uint256)._stakingFeeOnSell (#999) is not in mixedCase
Parameter SNAFU.setGoldenHour2SellFees(uint256,uint256,uint256,uint256,uint256,uint256)._holdersFeeOnSell (#999) is not in mixedCase
Constant SNAFU._name (#686) is not in UPPER_CASE_WITH_UNDERSCORES
Constant SNAFU._symbol (#687) is not in UPPER_CASE_WITH_UNDERSCORES
Constant SNAFU.initialSupply (#696) is not in UPPER_CASE_WITH_UNDERSCORES
Parameter SNAFUDividendTracker.getAccount(address)._account (#1515) is not in mixedCase
Follow the Solidity naming convention.

Additional information: link

Redundant expression "this (#11)" inContext (#5-14)
Remove redundant statements if they congest code but offer no value.

Additional information: link

Reentrancy in SNAFU._swapAndLiquify() (#1399-1435):
External calls:
- address(buyBackWallet).transfer(amountBNBBuyBack) (#1417)
- address(charityWallet).transfer(amountBNBCharity) (#1418)
- address(marketingWallet).transfer(amountBNBMarketing) (#1419)
External calls sending eth:
- address(buyBackWallet).transfer(amountBNBBuyBack) (#1417)
- address(charityWallet).transfer(amountBNBCharity) (#1418)
- address(marketingWallet).transfer(amountBNBMarketing) (#1419)
- _addLiquidity(amountToLiquify,amountBNBLiquidity) (#1422)
- uniswapV2Router.addLiquidityETH{value: ethAmount}(address(this),tokenAmount,0,0,liquidityWallet,block.timestamp) (#1451-1458)
State variables written after the call(s):
- _addLiquidity(amountToLiquify,amountBNBLiquidity) (#1422)
- _allowances[owner][spender] = amount (#525)
Event emitted after the call(s):
- Approval(owner,spender,amount) (#526)
- _addLiquidity(amountToLiquify,amountBNBLiquidity) (#1422)
- StakingTokensSent(amountToStake) (#1428)
- SwapAndLiquify(amountToSwap,amountBNBLiquidity,amountToLiquify) (#1423)
Reentrancy in SNAFU._swapAndLiquify() (#1399-1435):
External calls:
- address(buyBackWallet).transfer(amountBNBBuyBack) (#1417)
- address(charityWallet).transfer(amountBNBCharity) (#1418)
- address(marketingWallet).transfer(amountBNBMarketing) (#1419)
External calls sending eth:
- address(buyBackWallet).transfer(amountBNBBuyBack) (#1417)
- address(charityWallet).transfer(amountBNBCharity) (#1418)
- address(marketingWallet).transfer(amountBNBMarketing) (#1419)
- _addLiquidity(amountToLiquify,amountBNBLiquidity) (#1422)
- uniswapV2Router.addLiquidityETH{value: ethAmount}(address(this),tokenAmount,0,0,liquidityWallet,block.timestamp) (#1451-1458)
- (success) = address(dividendTracker).call{value: amountBNBHolders}() (#1431)
Event emitted after the call(s):
- DividendsSent(amountBNBHolders) (#1433)
Reentrancy in SNAFU._transfer(address,address,uint256) (#1131-1215):
External calls:
- _swapAndLiquify() (#1182)
- address(buyBackWallet).transfer(amountBNBBuyBack) (#1417)
- address(charityWallet).transfer(amountBNBCharity) (#1418)
- address(marketingWallet).transfer(amountBNBMarketing) (#1419)
External calls sending eth:
- _swapAndLiquify() (#1182)
- uniswapV2Router.addLiquidityETH{value: ethAmount}(address(this),tokenAmount,0,0,liquidityWallet,block.timestamp) (#1451-1458)
- address(buyBackWallet).transfer(amountBNBBuyBack) (#1417)
- address(charityWallet).transfer(amountBNBCharity) (#1418)
- address(marketingWallet).transfer(amountBNBMarketing) (#1419)
- (success) = address(dividendTracker).call{value: amountBNBHolders}() (#1431)
State variables written after the call(s):
- super._transfer(from,address(this),fee) (#1194)
- _balances[sender] = _balances[sender].sub(amount,ERC20: transfer amount exceeds balance) (#497)
- _balances[recipient] = _balances[recipient].add(amount) (#498)
- super._transfer(from,to,amount) (#1203)
- _balances[sender] = _balances[sender].sub(amount,ERC20: transfer amount exceeds balance) (#497)
- _balances[recipient] = _balances[recipient].add(amount) (#498)
- _buyTimesInLaunch[to] = currentTimestamp (#1199)
- _swapping = false (#1183)
Event emitted after the call(s):
- ProcessedDividendTracker(iterations,claims,lastProcessedIndex,true,gas,tx.origin) (#1211)
- Transfer(sender,recipient,amount) (#499)
- super._transfer(from,address(this),fee) (#1194)
- Transfer(sender,recipient,amount) (#499)
- super._transfer(from,to,amount) (#1203)
Apply the check-effects-interactions pattern.

Additional information: link

Variable IUniswapV2Router01.addLiquidity(address,address,uint256,uint256,uint256,uint256,address,uint256).amountADesired (#39) is too similar to IUniswapV2Router01.addLiquidity(address,address,uint256,uint256,uint256,uint256,address,uint256).amountBDesired (#40)
Variable DividendPayingToken._withdrawDividendOfUser(address)._withdrawableDividend (#600) is too similar to SNAFUDividendTracker.getAccount(address).withdrawableDividends (#1520)
Prevent variables from having similar names.

Additional information: link

SNAFU.constructor() (#800-841) uses literals with too many digits:
- dividendTracker.excludeFromDividends(address(0x000000000000000000000000000000000000dEaD)) (#825)
SNAFU.slitherConstructorVariables() (#682-1460) uses literals with too many digits:
- minimumTokensBeforeSwap = 25000000 * (10 ** 18) (#704)
SNAFU.slitherConstructorVariables() (#682-1460) uses literals with too many digits:
- gasForProcessing = 300000 (#705)
SNAFU.slitherConstructorConstantVariables() (#682-1460) uses literals with too many digits:
- initialSupply = 1000000000 * (10 ** 18) (#696)
SNAFUDividendTracker.getAccountAtIndex(uint256) (#1544-1559) uses literals with too many digits:
- (0x0000000000000000000000000000000000000000,- 1,- 1,0,0,0,0,0) (#1555)
Use: Ether suffix, Time suffix, or The scientific notation

Additional information: link

SafeMathInt.MAX_INT256 (#317) is never used in SafeMathInt (#315-352)
SNAFU._decimals (#688) is never used in SNAFU (#682-1460)
SNAFU._default (#743) is never used in SNAFU (#682-1460)
Remove unused state variables.

Additional information: link

get(IterableMapping.Map,address) should be declared external:
- IterableMapping.get(IterableMapping.Map,address) (#370-372)
getIndexOfKey(IterableMapping.Map,address) should be declared external:
- IterableMapping.getIndexOfKey(IterableMapping.Map,address) (#374-379)
getKeyAtIndex(IterableMapping.Map,uint256) should be declared external:
- IterableMapping.getKeyAtIndex(IterableMapping.Map,uint256) (#381-383)
size(IterableMapping.Map) should be declared external:
- IterableMapping.size(IterableMapping.Map) (#385-387)
name() should be declared external:
- ERC20.name() (#435-437)
symbol() should be declared external:
- ERC20.symbol() (#439-441)
decimals() should be declared external:
- ERC20.decimals() (#443-445)
transfer(address,uint256) should be declared external:
- ERC20.transfer(address,uint256) (#455-458)
allowance(address,address) should be declared external:
- ERC20.allowance(address,address) (#460-462)
approve(address,uint256) should be declared external:
- ERC20.approve(address,uint256) (#464-467)
transferFrom(address,address,uint256) should be declared external:
- ERC20.transferFrom(address,address,uint256) (#469-477)
increaseAllowance(address,uint256) should be declared external:
- ERC20.increaseAllowance(address,uint256) (#479-482)
decreaseAllowance(address,uint256) should be declared external:
- ERC20.decreaseAllowance(address,uint256) (#484-487)
renounceOwnership() should be declared external:
- Ownable.renounceOwnership() (#556-559)
transferOwnership(address) should be declared external:
- Ownable.transferOwnership(address) (#561-565)
withdrawDividend() should be declared external:
- DividendPayingToken.withdrawDividend() (#596-598)
dividendOf(address) should be declared external:
- DividendPayingToken.dividendOf(address) (#635-637)
withdrawnDividendOf(address) should be declared external:
- DividendPayingToken.withdrawnDividendOf(address) (#641-643)
launch() should be declared external:
- SNAFU.launch() (#849-854)
cancelLaunch() should be declared external:
- SNAFU.cancelLaunch() (#855-860)
activateTrading() should be declared external:
- SNAFU.activateTrading() (#861-863)
deactivateTrading() should be declared external:
- SNAFU.deactivateTrading() (#864-867)
setGoldenHour() should be declared external:
- SNAFU.setGoldenHour() (#868-874)
cancelGoldenHour() should be declared external:
- SNAFU.cancelGoldenHour() (#875-879)
updateDividendTracker(address) should be declared external:
- SNAFU.updateDividendTracker(address) (#880-890)
excludeFromFees(address,bool) should be declared external:
- SNAFU.excludeFromFees(address,bool) (#899-903)
excludeFromDividends(address) should be declared external:
- SNAFU.excludeFromDividends(address) (#904-906)
excludeFromMaxTransactionLimit(address,bool) should be declared external:
- SNAFU.excludeFromMaxTransactionLimit(address,bool) (#907-911)
excludeFromMaxWalletLimit(address,bool) should be declared external:
- SNAFU.excludeFromMaxWalletLimit(address,bool) (#912-916)
blockAccount(address) should be declared external:
- SNAFU.blockAccount(address) (#917-925)
unblockAccount(address) should be declared external:
- SNAFU.unblockAccount(address) (#926-930)
setWallets(address,address,address,address) should be declared external:
- SNAFU.setWallets(address,address,address,address) (#931-952)
setStakingAddress(address) should be declared external:
- SNAFU.setStakingAddress(address) (#953-957)
setBaseFeesOnBuy(uint256,uint256,uint256,uint256,uint256,uint256) should be declared external:
- SNAFU.setBaseFeesOnBuy(uint256,uint256,uint256,uint256,uint256,uint256) (#959-962)
setBaseFeesOnSell(uint256,uint256,uint256,uint256,uint256,uint256) should be declared external:
- SNAFU.setBaseFeesOnSell(uint256,uint256,uint256,uint256,uint256,uint256) (#963-966)
setLaunch2FeesOnBuy(uint256,uint256,uint256,uint256,uint256,uint256) should be declared external:
- SNAFU.setLaunch2FeesOnBuy(uint256,uint256,uint256,uint256,uint256,uint256) (#968-971)
setLaunch2FeesOnSell(uint256,uint256,uint256,uint256,uint256,uint256) should be declared external:
- SNAFU.setLaunch2FeesOnSell(uint256,uint256,uint256,uint256,uint256,uint256) (#972-975)
setLaunch3FeesOnBuy(uint256,uint256,uint256,uint256,uint256,uint256) should be declared external:
- SNAFU.setLaunch3FeesOnBuy(uint256,uint256,uint256,uint256,uint256,uint256) (#977-980)
setLaunch3FeesOnSell(uint256,uint256,uint256,uint256,uint256,uint256) should be declared external:
- SNAFU.setLaunch3FeesOnSell(uint256,uint256,uint256,uint256,uint256,uint256) (#981-984)
setGoldenHour1BuyFees(uint256,uint256,uint256,uint256,uint256,uint256) should be declared external:
- SNAFU.setGoldenHour1BuyFees(uint256,uint256,uint256,uint256,uint256,uint256) (#986-989)
setGoldenHour1SellFees(uint256,uint256,uint256,uint256,uint256,uint256) should be declared external:
- SNAFU.setGoldenHour1SellFees(uint256,uint256,uint256,uint256,uint256,uint256) (#990-993)
setGoldenHour2BuyFees(uint256,uint256,uint256,uint256,uint256,uint256) should be declared external:
- SNAFU.setGoldenHour2BuyFees(uint256,uint256,uint256,uint256,uint256,uint256) (#995-998)
setGoldenHour2SellFees(uint256,uint256,uint256,uint256,uint256,uint256) should be declared external:
- SNAFU.setGoldenHour2SellFees(uint256,uint256,uint256,uint256,uint256,uint256) (#999-1002)
setUniswapRouter(address) should be declared external:
- SNAFU.setUniswapRouter(address) (#1003-1008)
setGasForProcessing(uint256) should be declared external:
- SNAFU.setGasForProcessing(uint256) (#1009-1013)
setMaxTransactionAmount(uint256) should be declared external:
- SNAFU.setMaxTransactionAmount(uint256) (#1014-1018)
setMaxWalletAmount(uint256) should be declared external:
- SNAFU.setMaxWalletAmount(uint256) (#1019-1023)
setMinimumTokensBeforeSwap(uint256) should be declared external:
- SNAFU.setMinimumTokensBeforeSwap(uint256) (#1024-1028)
setMinimumTokenBalanceForDividends(uint256) should be declared external:
- SNAFU.setMinimumTokenBalanceForDividends(uint256) (#1029-1031)
withdrawableDividendOf(address) should be declared external:
- SNAFU.withdrawableDividendOf(address) (#1087-1089)
dividendTokenBalanceOf(address) should be declared external:
- SNAFU.dividendTokenBalanceOf(address) (#1090-1092)
getAccountAtIndex(uint256) should be declared external:
- SNAFUDividendTracker.getAccountAtIndex(uint256) (#1544-1559)
process(uint256) should be declared external:
- SNAFUDividendTracker.process(uint256) (#1580-1613)
Use the external attribute for functions never called from the contract.

Additional information: link

Average 30d PancakeSwap liquidity is less than $100. Token is either dead or inactive.

Average 30d PancakeSwap volume is less than $100. Token is either dead or inactive.

Average 30d number of PancakeSwap swaps is less than 1. Token is either dead or inactive.

Average PancakeSwap trading volume, liqudity, number of swaps are extremely low. Token seems to be dead.

Contract has 12% buy tax and 13% sell tax.
Taxes are high (over 10%) but contract ownership is renounced.

Number of Binance Smart Chain (BSC) token holders is low.

Token is deployed only at one blockchain

Token has only one trading pair

Unable to find website, listings and other project-related information

Young tokens have high risks of scam / price dump / death

Token has no active CoinGecko listing / rank

Token has no active CoinMarketCap listing / rank