Second Doge Token Logo

SecondDoge [Second Doge] Token

About SecondDoge

Listings

Not Found
Token 7 months

2️⃣Second Doge 🐶 Hyper Deflationary With Auto Rewards TGhttps://t.me/SecondDogeOfficiala

Social

Laser Scorebeta Last Audit: 12 January 2022

report
Token has too many issues. Scam probability is high.

SecondDoge.swapBack() (#534-575) sends eth to arbitrary user
Dangerous calls:
- address(marketingFeeReceiver).call{gas: 30000,value: amountBNBMarketing}() (#562)
Ensure that an arbitrary user cannot withdraw unauthorized funds.

Additional information: link

Reentrancy in SecondDoge._transferFrom(address,address,uint256) (#467-489):
External calls:
- swapBack() (#472)
- router.swapExactTokensForETHSupportingFeeOnTransferTokens(amountToSwap,0,path,address(this),block.timestamp) (#545-551)
- distributor.deposit{value: amountBNBReflection}() (#561)
- address(marketingFeeReceiver).call{gas: 30000,value: amountBNBMarketing}() (#562)
- router.addLiquidityETH{value: amountBNBLiquidity}(address(this),amountToLiquify,0,0,autoLiquidityReceiver,block.timestamp) (#565-572)
- triggerAutoBuyback() (#473)
- router.swapExactETHForTokensSupportingFeeOnTransferTokens{value: amount}(0,path,to,block.timestamp) (#609-614)
External calls sending eth:
- swapBack() (#472)
- distributor.deposit{value: amountBNBReflection}() (#561)
- address(marketingFeeReceiver).call{gas: 30000,value: amountBNBMarketing}() (#562)
- router.addLiquidityETH{value: amountBNBLiquidity}(address(this),amountToLiquify,0,0,autoLiquidityReceiver,block.timestamp) (#565-572)
- triggerAutoBuyback() (#473)
- router.swapExactETHForTokensSupportingFeeOnTransferTokens{value: amount}(0,path,to,block.timestamp) (#609-614)
State variables written after the call(s):
- _balances[sender] = _balances[sender].sub(amount,Insufficient Balance) (#477)
- _balances[recipient] = _balances[recipient].add(amountReceived) (#480)
- amountReceived = takeFee(sender,recipient,amount) (#479)
- _balances[address(this)] = _balances[address(this)].add(feeAmount) (#521)
- triggerAutoBuyback() (#473)
- inSwap = true (#412)
- inSwap = false (#412)
Apply the check-effects-interactions pattern.

Additional information: link

DividendDistributor.distributeDividend(address) (#310-321) ignores return value by BNB.transfer(shareholder,amount) (#316)
Use SafeERC20, or ensure that the transfer/transferFrom return value is checked.

Additional information: link


Unable to verify that contract auditor is trusted: Certik, Quantstamp, Hacken, Solidity, Paladinsec, Openzeppelin, Verichains


Combination 1: Reentrancy vulnerabilities + Functions that send Ether to arbitraty destination. Usual for scams. May be justified by some complex mechanics (e.g. rebase, reflections). DYOR & manual audit are advised.


Combination 2: Unchecked transfer + Functions that send Ether to arbitraty destination. Usual for scams. May be justified by some complex mechanics (e.g. rebase, reflections). DYOR & manual audit are advised.


Combination 3: Reentrancy vulnerabilities + Unchecked transfer vulnerability. Usual for scams. May be justified by some complex mechanics (e.g. rebase, reflections). DYOR & manual audit are advised.

DividendDistributor.process(uint256) (#279-303) has costly operations inside a loop:
- currentIndex = 0 (#291)
DividendDistributor.distributeDividend(address) (#310-321) has costly operations inside a loop:
- totalDistributed = totalDistributed.add(amount) (#315)
DividendDistributor.process(uint256) (#279-303) has costly operations inside a loop:
- currentIndex ++ (#300)
Use a local variable to hold the loop computation result.

Additional information: link

SecondDoge._maxTxAmount (#367) is set pre-construction with a non-constant function or state variable:
- _totalSupply / 250
SecondDoge.swapThreshold (#410) is set pre-construction with a non-constant function or state variable:
- _totalSupply / 2500
Remove any initialization of state variables via non-constant state variables or function calls. If variables must be set upon contract deployment, locate initialization in the constructor instead.

Additional information: link

Pragma version^0.7.4 (#1) allows old versions
solc-0.7.4 is not recommended for deployment
Deploy with any of the following Solidity versions: 0.5.16 - 0.5.17, 0.6.11 - 0.6.12, 0.7.5 - 0.7.6 Use a simple pragma version that allows any of these versions. Consider using the latest version of Solidity for testing.

Additional information: link

Low level call in SecondDoge.swapBack() (#534-575):
- address(marketingFeeReceiver).call{gas: 30000,value: amountBNBMarketing}() (#562)
Avoid low-level calls. Check the call success. If the call is meant for a contract, check for code existence

Additional information: link

DividendDistributor.shouldDistribute(address) (#305-308) uses timestamp for comparisons
Dangerous comparisons:
- shareholderClaims[shareholder] + minPeriod < block.timestamp && getUnpaidEarnings(shareholder) > minDistribution (#306-307)
SecondDoge._transferFrom(address,address,uint256) (#467-489) uses timestamp for comparisons
Dangerous comparisons:
- require(bool)(_balances[sender] > 0) (#475)
SecondDoge.getTotalFee(bool) (#506-510) uses timestamp for comparisons
Dangerous comparisons:
- selling && buybackMultiplierTriggeredAt.add(buybackMultiplierLength) > block.timestamp (#508)
SecondDoge.shouldSwapBack() (#527-532) uses timestamp for comparisons
Dangerous comparisons:
- msg.sender != pair && ! inSwap && swapEnabled && _balances[address(this)] >= swapThreshold (#528-531)
SecondDoge.isOverLiquified(uint256,uint256) (#705-707) uses timestamp for comparisons
Dangerous comparisons:
- getLiquidityBacking(accuracy) > target (#706)
Avoid relying on block.timestamp.

Additional information: link

Reentrancy in DividendDistributor.distributeDividend(address) (#310-321):
External calls:
- BNB.transfer(shareholder,amount) (#316)
State variables written after the call(s):
- shares[shareholder].totalRealised = shares[shareholder].totalRealised.add(amount) (#318)
- shares[shareholder].totalExcluded = getCumulativeDividends(shares[shareholder].amount) (#319)
Reentrancy in DividendDistributor.process(uint256) (#279-303):
External calls:
- distributeDividend(shareholders[currentIndex]) (#295)
- BNB.transfer(shareholder,amount) (#316)
State variables written after the call(s):
- currentIndex ++ (#300)
Reentrancy in DividendDistributor.setShare(address,uint256) (#243-257):
External calls:
- distributeDividend(shareholder) (#245)
- BNB.transfer(shareholder,amount) (#316)
State variables written after the call(s):
- shares[shareholder].amount = amount (#255)
- shares[shareholder].totalExcluded = getCumulativeDividends(shares[shareholder].amount) (#256)
Apply the check-effects-interactions pattern.

Additional information: link

SecondDoge.swapBack() (#534-575) ignores return value by address(marketingFeeReceiver).call{gas: 30000,value: amountBNBMarketing}() (#562)
Ensure that the return value of a low-level call is checked or logged.

Additional information: link

SecondDoge.swapBack() (#534-575) ignores return value by router.addLiquidityETH{value: amountBNBLiquidity}(address(this),amountToLiquify,0,0,autoLiquidityReceiver,block.timestamp) (#565-572)
Ensure that all the return values of the function calls are used.

Additional information: link

DividendDistributor.setDistributionCriteria(uint256,uint256) (#238-241) should emit an event for:
- minPeriod = _minPeriod (#239)
- minDistribution = _minDistribution (#240)
SecondDoge.setAutoBuybackSettings(bool,uint256,uint256,uint256) (#617-624) should emit an event for:
- autoBuybackCap = _cap (#619)
- autoBuybackAmount = _amount (#621)
SecondDoge.setBuybackMultiplierSettings(uint256,uint256,uint256) (#626-631) should emit an event for:
- buybackMultiplierNumerator = numerator (#628)
- buybackMultiplierDenominator = denominator (#629)
- buybackMultiplierLength = length (#630)
SecondDoge.setTxLimit(uint256) (#641-644) should emit an event for:
- _maxTxAmount = amount (#643)
SecondDoge.setFees(uint256,uint256,uint256,uint256,uint256) (#664-671) should emit an event for:
- liquidityFee = _liquidityFee (#665)
- reflectionFee = _reflectionFee (#667)
- marketingFee = _marketingFee (#668)
- totalFee = _liquidityFee.add(_buybackFee).add(_reflectionFee).add(_marketingFee) (#669)
- feeDenominator = _feeDenominator (#670)
SecondDoge.setSwapBackSettings(bool,uint256) (#678-681) should emit an event for:
- swapThreshold = _amount (#680)
SecondDoge.setTargetLiquidity(uint256,uint256) (#683-686) should emit an event for:
- targetLiquidity = _target (#684)
- targetLiquidityDenominator = _denominator (#685)
Emit an event for critical parameter changes.

Additional information: link

Auth.transferOwnership(address).adr (#120) lacks a zero-check on :
- owner = adr (#121)
SecondDoge.setFeeReceivers(address,address)._autoLiquidityReceiver (#673) lacks a zero-check on :
- autoLiquidityReceiver = _autoLiquidityReceiver (#674)
SecondDoge.setFeeReceivers(address,address)._marketingFeeReceiver (#673) lacks a zero-check on :
- marketingFeeReceiver = _marketingFeeReceiver (#675)
Check that the address is not zero.

Additional information: link

DividendDistributor.distributeDividend(address) (#310-321) has external calls inside a loop: BNB.transfer(shareholder,amount) (#316)
Favor pull over push strategy for external calls.

Additional information: link

Reentrancy in SecondDoge._transferFrom(address,address,uint256) (#467-489):
External calls:
- swapBack() (#472)
- router.swapExactTokensForETHSupportingFeeOnTransferTokens(amountToSwap,0,path,address(this),block.timestamp) (#545-551)
- distributor.deposit{value: amountBNBReflection}() (#561)
- address(marketingFeeReceiver).call{gas: 30000,value: amountBNBMarketing}() (#562)
- router.addLiquidityETH{value: amountBNBLiquidity}(address(this),amountToLiquify,0,0,autoLiquidityReceiver,block.timestamp) (#565-572)
- triggerAutoBuyback() (#473)
- router.swapExactETHForTokensSupportingFeeOnTransferTokens{value: amount}(0,path,to,block.timestamp) (#609-614)
External calls sending eth:
- swapBack() (#472)
- distributor.deposit{value: amountBNBReflection}() (#561)
- address(marketingFeeReceiver).call{gas: 30000,value: amountBNBMarketing}() (#562)
- router.addLiquidityETH{value: amountBNBLiquidity}(address(this),amountToLiquify,0,0,autoLiquidityReceiver,block.timestamp) (#565-572)
- triggerAutoBuyback() (#473)
- router.swapExactETHForTokensSupportingFeeOnTransferTokens{value: amount}(0,path,to,block.timestamp) (#609-614)
State variables written after the call(s):
- launch() (#475)
- launchedAt = block.number (#638)
Reentrancy in SecondDoge.constructor() (#414-433):
External calls:
- pair = IDEXFactory(router.factory()).createPair(WBNB,address(this)) (#416)
State variables written after the call(s):
- _allowances[address(this)][address(router)] = uint256(- 1) (#417)
- _balances[_presaler] = _totalSupply (#431)
- autoLiquidityReceiver = msg.sender (#428)
- distributor = new DividendDistributor(address(router)) (#419)
- isDividendExempt[pair] = true (#424)
- isDividendExempt[address(this)] = true (#425)
- isDividendExempt[DEAD] = true (#426)
- isFeeExempt[_presaler] = true (#422)
- isTxLimitExempt[_presaler] = true (#423)
- marketingFeeReceiver = 0x6e8d2d9dE87F72412e02Fba9Bb81663A86626FCe (#429)
Reentrancy in DividendDistributor.deposit() (#259-277):
External calls:
- router.swapExactETHForTokensSupportingFeeOnTransferTokens{value: msg.value}(0,path,address(this),block.timestamp) (#266-271)
State variables written after the call(s):
- dividendsPerShare = dividendsPerShare.add(dividendsPerShareAccuracyFactor.mul(amount).div(totalShares)) (#276)
- totalDividends = totalDividends.add(amount) (#275)
Reentrancy in DividendDistributor.distributeDividend(address) (#310-321):
External calls:
- BNB.transfer(shareholder,amount) (#316)
State variables written after the call(s):
- shareholderClaims[shareholder] = block.timestamp (#317)
Reentrancy in DividendDistributor.setShare(address,uint256) (#243-257):
External calls:
- distributeDividend(shareholder) (#245)
- BNB.transfer(shareholder,amount) (#316)
State variables written after the call(s):
- addShareholder(shareholder) (#249)
- shareholderIndexes[shareholder] = shareholders.length (#343)
- removeShareholder(shareholder) (#251)
- shareholderIndexes[shareholders[shareholders.length - 1]] = shareholderIndexes[shareholder] (#349)
- addShareholder(shareholder) (#249)
- shareholders.push(shareholder) (#344)
- removeShareholder(shareholder) (#251)
- shareholders[shareholderIndexes[shareholder]] = shareholders[shareholders.length - 1] (#348)
- shareholders.pop() (#350)
- totalShares = totalShares.sub(shares[shareholder].amount).add(amount) (#254)
Reentrancy in SecondDoge.triggerAutoBuyback() (#597-602):
External calls:
- buyTokens(autoBuybackAmount,DEAD) (#598)
- router.swapExactETHForTokensSupportingFeeOnTransferTokens{value: amount}(0,path,to,block.timestamp) (#609-614)
State variables written after the call(s):
- autoBuybackAccumulator = autoBuybackAccumulator.add(autoBuybackAmount) (#600)
- autoBuybackBlockLast = block.number (#599)
- autoBuybackEnabled = false (#601)
Reentrancy in SecondDoge.triggerBuyback(uint256,bool) (#585-591):
External calls:
- buyTokens(amount,DEAD) (#586)
- router.swapExactETHForTokensSupportingFeeOnTransferTokens{value: amount}(0,path,to,block.timestamp) (#609-614)
State variables written after the call(s):
- buybackMultiplierTriggeredAt = block.timestamp (#588)
Apply the check-effects-interactions pattern.

Additional information: link

Reentrancy in SecondDoge._transferFrom(address,address,uint256) (#467-489):
External calls:
- swapBack() (#472)
- router.swapExactTokensForETHSupportingFeeOnTransferTokens(amountToSwap,0,path,address(this),block.timestamp) (#545-551)
- distributor.deposit{value: amountBNBReflection}() (#561)
- address(marketingFeeReceiver).call{gas: 30000,value: amountBNBMarketing}() (#562)
- router.addLiquidityETH{value: amountBNBLiquidity}(address(this),amountToLiquify,0,0,autoLiquidityReceiver,block.timestamp) (#565-572)
- triggerAutoBuyback() (#473)
- router.swapExactETHForTokensSupportingFeeOnTransferTokens{value: amount}(0,path,to,block.timestamp) (#609-614)
- distributor.setShare(sender,_balances[sender]) (#482)
- distributor.setShare(recipient,_balances[recipient]) (#483)
- distributor.process(distributorGas) (#485)
External calls sending eth:
- swapBack() (#472)
- distributor.deposit{value: amountBNBReflection}() (#561)
- address(marketingFeeReceiver).call{gas: 30000,value: amountBNBMarketing}() (#562)
- router.addLiquidityETH{value: amountBNBLiquidity}(address(this),amountToLiquify,0,0,autoLiquidityReceiver,block.timestamp) (#565-572)
- triggerAutoBuyback() (#473)
- router.swapExactETHForTokensSupportingFeeOnTransferTokens{value: amount}(0,path,to,block.timestamp) (#609-614)
Event emitted after the call(s):
- Transfer(sender,recipient,amountReceived) (#487)
Reentrancy in SecondDoge._transferFrom(address,address,uint256) (#467-489):
External calls:
- swapBack() (#472)
- router.swapExactTokensForETHSupportingFeeOnTransferTokens(amountToSwap,0,path,address(this),block.timestamp) (#545-551)
- distributor.deposit{value: amountBNBReflection}() (#561)
- address(marketingFeeReceiver).call{gas: 30000,value: amountBNBMarketing}() (#562)
- router.addLiquidityETH{value: amountBNBLiquidity}(address(this),amountToLiquify,0,0,autoLiquidityReceiver,block.timestamp) (#565-572)
- triggerAutoBuyback() (#473)
- router.swapExactETHForTokensSupportingFeeOnTransferTokens{value: amount}(0,path,to,block.timestamp) (#609-614)
External calls sending eth:
- swapBack() (#472)
- distributor.deposit{value: amountBNBReflection}() (#561)
- address(marketingFeeReceiver).call{gas: 30000,value: amountBNBMarketing}() (#562)
- router.addLiquidityETH{value: amountBNBLiquidity}(address(this),amountToLiquify,0,0,autoLiquidityReceiver,block.timestamp) (#565-572)
- triggerAutoBuyback() (#473)
- router.swapExactETHForTokensSupportingFeeOnTransferTokens{value: amount}(0,path,to,block.timestamp) (#609-614)
Event emitted after the call(s):
- Transfer(sender,address(this),feeAmount) (#522)
- amountReceived = takeFee(sender,recipient,amount) (#479)
Reentrancy in SecondDoge.constructor() (#414-433):
External calls:
- pair = IDEXFactory(router.factory()).createPair(WBNB,address(this)) (#416)
Event emitted after the call(s):
- Transfer(address(0),_presaler,_totalSupply) (#432)
Reentrancy in SecondDoge.swapBack() (#534-575):
External calls:
- router.swapExactTokensForETHSupportingFeeOnTransferTokens(amountToSwap,0,path,address(this),block.timestamp) (#545-551)
- distributor.deposit{value: amountBNBReflection}() (#561)
- address(marketingFeeReceiver).call{gas: 30000,value: amountBNBMarketing}() (#562)
- router.addLiquidityETH{value: amountBNBLiquidity}(address(this),amountToLiquify,0,0,autoLiquidityReceiver,block.timestamp) (#565-572)
External calls sending eth:
- distributor.deposit{value: amountBNBReflection}() (#561)
- address(marketingFeeReceiver).call{gas: 30000,value: amountBNBMarketing}() (#562)
- router.addLiquidityETH{value: amountBNBLiquidity}(address(this),amountToLiquify,0,0,autoLiquidityReceiver,block.timestamp) (#565-572)
Event emitted after the call(s):
- AutoLiquify(amountBNBLiquidity,amountToLiquify) (#573)
Reentrancy in SecondDoge.triggerBuyback(uint256,bool) (#585-591):
External calls:
- buyTokens(amount,DEAD) (#586)
- router.swapExactETHForTokensSupportingFeeOnTransferTokens{value: amount}(0,path,to,block.timestamp) (#609-614)
Event emitted after the call(s):
- BuybackMultiplierActive(buybackMultiplierLength) (#589)
Apply the check-effects-interactions pattern.

Additional information: link

Function IDEXRouter.WETH() (#135) is not in mixedCase
Parameter DividendDistributor.setDistributionCriteria(uint256,uint256)._minPeriod (#238) is not in mixedCase
Parameter DividendDistributor.setDistributionCriteria(uint256,uint256)._minDistribution (#238) is not in mixedCase
Variable DividendDistributor._token (#191) is not in mixedCase
Variable DividendDistributor.BNB (#199) is not in mixedCase
Variable DividendDistributor.WBNB (#200) is not in mixedCase
Parameter SecondDoge.setAutoBuybackSettings(bool,uint256,uint256,uint256)._enabled (#617) is not in mixedCase
Parameter SecondDoge.setAutoBuybackSettings(bool,uint256,uint256,uint256)._cap (#617) is not in mixedCase
Parameter SecondDoge.setAutoBuybackSettings(bool,uint256,uint256,uint256)._amount (#617) is not in mixedCase
Parameter SecondDoge.setAutoBuybackSettings(bool,uint256,uint256,uint256)._period (#617) is not in mixedCase
Parameter SecondDoge.setFees(uint256,uint256,uint256,uint256,uint256)._liquidityFee (#664) is not in mixedCase
Parameter SecondDoge.setFees(uint256,uint256,uint256,uint256,uint256)._buybackFee (#664) is not in mixedCase
Parameter SecondDoge.setFees(uint256,uint256,uint256,uint256,uint256)._reflectionFee (#664) is not in mixedCase
Parameter SecondDoge.setFees(uint256,uint256,uint256,uint256,uint256)._marketingFee (#664) is not in mixedCase
Parameter SecondDoge.setFees(uint256,uint256,uint256,uint256,uint256)._feeDenominator (#664) is not in mixedCase
Parameter SecondDoge.setFeeReceivers(address,address)._autoLiquidityReceiver (#673) is not in mixedCase
Parameter SecondDoge.setFeeReceivers(address,address)._marketingFeeReceiver (#673) is not in mixedCase
Parameter SecondDoge.setSwapBackSettings(bool,uint256)._enabled (#678) is not in mixedCase
Parameter SecondDoge.setSwapBackSettings(bool,uint256)._amount (#678) is not in mixedCase
Parameter SecondDoge.setTargetLiquidity(uint256,uint256)._target (#683) is not in mixedCase
Parameter SecondDoge.setTargetLiquidity(uint256,uint256)._denominator (#683) is not in mixedCase
Parameter SecondDoge.setDistributionCriteria(uint256,uint256)._minPeriod (#688) is not in mixedCase
Parameter SecondDoge.setDistributionCriteria(uint256,uint256)._minDistribution (#688) is not in mixedCase
Variable SecondDoge.BNB (#357) is not in mixedCase
Variable SecondDoge.WBNB (#358) is not in mixedCase
Variable SecondDoge.DEAD (#359) is not in mixedCase
Variable SecondDoge.ZERO (#360) is not in mixedCase
Constant SecondDoge._name (#362) is not in UPPER_CASE_WITH_UNDERSCORES
Constant SecondDoge._symbol (#363) is not in UPPER_CASE_WITH_UNDERSCORES
Constant SecondDoge._decimals (#364) is not in UPPER_CASE_WITH_UNDERSCORES
Variable SecondDoge._totalSupply (#366) is not in mixedCase
Variable SecondDoge._maxTxAmount (#367) is not in mixedCase
Variable SecondDoge._balances (#369) is not in mixedCase
Variable SecondDoge._allowances (#370) is not in mixedCase
Follow the Solidity naming convention.

Additional information: link

Variable IDEXRouter.addLiquidity(address,address,uint256,uint256,uint256,uint256,address,uint256).amountADesired (#140) is too similar to IDEXRouter.addLiquidity(address,address,uint256,uint256,uint256,uint256,address,uint256).amountBDesired (#141)
Prevent variables from having similar names.

Additional information: link

SecondDoge.slitherConstructorVariables() (#354-712) uses literals with too many digits:
- DEAD = 0x000000000000000000000000000000000000dEaD (#359)
SecondDoge.slitherConstructorVariables() (#354-712) uses literals with too many digits:
- ZERO = 0x0000000000000000000000000000000000000000 (#360)
SecondDoge.slitherConstructorVariables() (#354-712) uses literals with too many digits:
- _totalSupply = 100000000000000 * (10 ** _decimals) (#366)
SecondDoge.slitherConstructorVariables() (#354-712) uses literals with too many digits:
- distributorGas = 500000 (#407)
Use: Ether suffix, Time suffix, or The scientific notation

Additional information: link

SecondDoge.BNB (#357) is never used in SecondDoge (#354-712)
Remove unused state variables.

Additional information: link

DividendDistributor.WBNB (#200) should be constant
DividendDistributor.dividendsPerShareAccuracyFactor (#213) should be constant
SecondDoge.BNB (#357) should be constant
SecondDoge.DEAD (#359) should be constant
SecondDoge.WBNB (#358) should be constant
SecondDoge.ZERO (#360) should be constant
SecondDoge._totalSupply (#366) should be constant
Add the constant attributes to state variables that never change.

Additional information: link

authorize(address) should be declared external:
- Auth.authorize(address) (#92-94)
unauthorize(address) should be declared external:
- Auth.unauthorize(address) (#99-101)
transferOwnership(address) should be declared external:
- Auth.transferOwnership(address) (#120-124)
Use the external attribute for functions never called from the contract.

Additional information: link

Holders:


Number of Binance Smart Chain (BSC) token holders is less than 100. Token is either dead or inactive. Ignore for presale.


Average PancakeSwap trading volume, liqudity, number of swaps are extremely low. Token seems to be dead.


Token is deployed only at one blockchain


Token has only one trading pair


Unable to find PancakeSwap trading pair to compute liquidity.


Unable to find PancakeSwap trading pair to compute volume.


Unable to find PancakeSwap trading pair to compute number of swaps.


Last post in Twitter was more than 30 days ago


Unable to find Blog account (Reddit or Medium)


Unable to find Youtube account


Unable to find Discord account


Twitter account has few posts


BscScan page for the token does not contain additional info: website, socials, description, etc.

Additional information: link


Unable to find token on CoinGecko

Additional information: link


Unable to find token on CoinMarketCap

Additional information: link


Unable to find token/project description on the website or on BscScan, CoinMarketCap


Unable to find whitepaper link on the website


Unable to find token on CoinHunt

Additional information: link


Unable to find code repository for the project


Young tokens have high risks of scam / price dump / death


Young tokens have high risks of scam / price dump / death


Young tokens have high risks of scam / price dump / death


Token has no active CoinGecko listing / rank


Token has no active CoinMarketCap listing / rank

Price for SecondDoge

News for SecondDoge