PulseFloki Token Logo

PULSEFLOKI Token

About PULSEFLOKI

Listings

Not Found
Token 13 months

Welcome to Pulse Floki
$PulseFloki is a community token launching on Binance Smart Chain (BSC) with the intention of onboarding users from there to the upcoming PulseChain launch. Users holding $PulseFloki on BSC will receive an equal, 1:1:1:1: ratio, airdrop on PulseChain, MATIC, FANTOM, and CARDANO.

This means, once we have deployed the token on each chain, you will have quintupled the amount of tokens because they will exist independently on each chain (BSC + PulseChain)

Once on PulseChain, PulseFloki holders will enjoy new features and use cases as we develop the project further.
There will be a 4% tax for liquidity.

There will also be a 1% tax for marketing.

Social

Laser Scorebeta Last Audit: 23 April 2022

report
Token has too many issues. Scam probability is high.

Anti-Scam

Links


Unable to find manual contract audit (e.g. Certik, PeckShield, Solidity...)

LiquidityGeneratorToken.addLiquidity(uint256,uint256) (#1643-1656) sends eth to arbitrary user
Dangerous calls:
- uniswapV2Router.addLiquidityETH{value: ethAmount}(address(this),tokenAmount,0,0,owner(),block.timestamp) (#1648-1655)
Ensure that an arbitrary user cannot withdraw unauthorized funds.

Additional information: link

OwnableUpgradeable.__gap (#417) shadows:
- ContextUpgradeable.__gap (#339)
Remove the state variable shadowing.

Additional information: link

Reentrancy in LiquidityGeneratorToken._transfer(address,address,uint256) (#1552-1600):
External calls:
- swapAndLiquify(contractTokenBalance) (#1587)
- uniswapV2Router.addLiquidityETH{value: ethAmount}(address(this),tokenAmount,0,0,owner(),block.timestamp) (#1648-1655)
- uniswapV2Router.swapExactTokensForETHSupportingFeeOnTransferTokens(tokenAmount,0,path,address(this),block.timestamp) (#1634-1640)
External calls sending eth:
- swapAndLiquify(contractTokenBalance) (#1587)
- uniswapV2Router.addLiquidityETH{value: ethAmount}(address(this),tokenAmount,0,0,owner(),block.timestamp) (#1648-1655)
State variables written after the call(s):
- _tokenTransfer(from,to,amount,takeFee) (#1599)
- _rOwned[address(this)] = _rOwned[address(this)].add(rLiquidity) (#1493)
- _rOwned[_charityAddress] = _rOwned[_charityAddress].add(rCharity) (#1502)
- _rOwned[sender] = _rOwned[sender].sub(rAmount) (#1681)
- _rOwned[sender] = _rOwned[sender].sub(rAmount) (#1691)
- _rOwned[sender] = _rOwned[sender].sub(rAmount) (#1397)
- _rOwned[sender] = _rOwned[sender].sub(rAmount) (#1703)
- _rOwned[recipient] = _rOwned[recipient].add(rTransferAmount) (#1682)
- _rOwned[recipient] = _rOwned[recipient].add(rTransferAmount) (#1704)
- _rOwned[recipient] = _rOwned[recipient].add(rTransferAmount) (#1693)
- _rOwned[recipient] = _rOwned[recipient].add(rTransferAmount) (#1399)
- _tokenTransfer(from,to,amount,takeFee) (#1599)
- _rTotal = _rTotal.sub(rFee) (#1446)
- _tokenTransfer(from,to,amount,takeFee) (#1599)
- _tOwned[address(this)] = _tOwned[address(this)].add(tLiquidity) (#1495)
- _tOwned[_charityAddress] = _tOwned[_charityAddress].add(tCharity) (#1504)
- _tOwned[sender] = _tOwned[sender].sub(tAmount) (#1396)
- _tOwned[sender] = _tOwned[sender].sub(tAmount) (#1702)
- _tOwned[recipient] = _tOwned[recipient].add(tTransferAmount) (#1692)
- _tOwned[recipient] = _tOwned[recipient].add(tTransferAmount) (#1398)
Apply the check-effects-interactions pattern.

Additional information: link


Combination 1: Reentrancy vulnerabilities + Functions that send Ether to arbitraty destination. Usual for scams. May be justified by some complex mechanics (e.g. rebase, reflections). DYOR & manual audit are advised.

LiquidityGeneratorToken.initialize(address,string,string,uint256,address,address,uint16,uint16,uint16,uint16) (#1220-1284) contains a tautology or contradiction:
- require(bool,string)(taxFeeBps_ >= 0 && taxFeeBps_ <= 10 ** 4,Invalid tax fee) (#1232)
LiquidityGeneratorToken.initialize(address,string,string,uint256,address,address,uint16,uint16,uint16,uint16) (#1220-1284) contains a tautology or contradiction:
- require(bool,string)(liquidityFeeBps_ >= 0 && liquidityFeeBps_ <= 10 ** 4,Invalid liquidity fee) (#1233)
LiquidityGeneratorToken.initialize(address,string,string,uint256,address,address,uint16,uint16,uint16,uint16) (#1220-1284) contains a tautology or contradiction:
- require(bool,string)(charityFeeBps_ >= 0 && charityFeeBps_ <= 10 ** 4,Invalid charity fee) (#1234)
LiquidityGeneratorToken.setTaxFeePercent(uint256) (#1422-1425) contains a tautology or contradiction:
- require(bool,string)(taxFeeBps >= 0 && taxFeeBps <= 10 ** 4,Invalid bps) (#1423)
LiquidityGeneratorToken.setLiquidityFeePercent(uint256) (#1427-1430) contains a tautology or contradiction:
- require(bool,string)(liquidityFeeBps >= 0 && liquidityFeeBps <= 10 ** 4,Invalid bps) (#1428)
LiquidityGeneratorToken.setMaxTxPercent(uint256) (#1432-1435) contains a tautology or contradiction:
- require(bool,string)(maxTxBps >= 0 && maxTxBps <= 10 ** 4,Invalid bps) (#1433)
Fix the incorrect comparison by changing the value type or the comparison.

Additional information: link


Contract ownership is not renounced (belongs to a wallet)

LiquidityGeneratorToken.addLiquidity(uint256,uint256) (#1643-1656) ignores return value by uniswapV2Router.addLiquidityETH{value: ethAmount}(address(this),tokenAmount,0,0,owner(),block.timestamp) (#1648-1655)
Ensure that all the return values of the function calls are used.

Additional information: link

LiquidityGeneratorToken.allowance(address,address).owner (#1312) shadows:
- OwnableUpgradeable.owner() (#384-386) (function)
LiquidityGeneratorToken._approve(address,address,uint256).owner (#1544) shadows:
- OwnableUpgradeable.owner() (#384-386) (function)
Rename the local variables that shadow another component.

Additional information: link

LiquidityGeneratorToken.includeInReward(address) (#1381-1392) has costly operations inside a loop:
- _excluded.pop() (#1388)
Use a local variable to hold the loop computation result.

Additional information: link

LiquidityGeneratorToken.setTaxFeePercent(uint256) (#1422-1425) should emit an event for:
- _taxFee = taxFeeBps (#1424)
LiquidityGeneratorToken.setLiquidityFeePercent(uint256) (#1427-1430) should emit an event for:
- _liquidityFee = liquidityFeeBps (#1429)
LiquidityGeneratorToken.setMaxTxPercent(uint256) (#1432-1435) should emit an event for:
- _maxTxAmount = _tTotal.mul(maxTxBps).div(10 ** 4) (#1434)
Emit an event for critical parameter changes.

Additional information: link

Reentrancy in LiquidityGeneratorToken._transfer(address,address,uint256) (#1552-1600):
External calls:
- swapAndLiquify(contractTokenBalance) (#1587)
- uniswapV2Router.addLiquidityETH{value: ethAmount}(address(this),tokenAmount,0,0,owner(),block.timestamp) (#1648-1655)
- uniswapV2Router.swapExactTokensForETHSupportingFeeOnTransferTokens(tokenAmount,0,path,address(this),block.timestamp) (#1634-1640)
External calls sending eth:
- swapAndLiquify(contractTokenBalance) (#1587)
- uniswapV2Router.addLiquidityETH{value: ethAmount}(address(this),tokenAmount,0,0,owner(),block.timestamp) (#1648-1655)
State variables written after the call(s):
- _tokenTransfer(from,to,amount,takeFee) (#1599)
- _charityFee = _previousCharityFee (#1537)
- _charityFee = 0 (#1531)
- _tokenTransfer(from,to,amount,takeFee) (#1599)
- _liquidityFee = _previousLiquidityFee (#1536)
- _liquidityFee = 0 (#1530)
- _tokenTransfer(from,to,amount,takeFee) (#1599)
- _previousCharityFee = _charityFee (#1527)
- _tokenTransfer(from,to,amount,takeFee) (#1599)
- _previousLiquidityFee = _liquidityFee (#1526)
- _tokenTransfer(from,to,amount,takeFee) (#1599)
- _previousTaxFee = _taxFee (#1525)
- _tokenTransfer(from,to,amount,takeFee) (#1599)
- _tFeeTotal = _tFeeTotal.add(tFee) (#1447)
- _tokenTransfer(from,to,amount,takeFee) (#1599)
- _taxFee = _previousTaxFee (#1535)
- _taxFee = 0 (#1529)
Reentrancy in LiquidityGeneratorToken.initialize(address,string,string,uint256,address,address,uint16,uint16,uint16,uint16) (#1220-1284):
External calls:
- uniswapV2Pair = IUniswapV2Factory(_uniswapV2Router.factory()).createPair(address(this),_uniswapV2Router.WETH()) (#1268-1269)
State variables written after the call(s):
- _isExcludedFromFee[owner()] = true (#1275)
- _isExcludedFromFee[address(this)] = true (#1276)
- _isExcludedFromMaxTx[address(this)] = true (#1279)
- _isExcludedFromMaxTx[address(0xdead)] = true (#1280)
- _isExcludedFromMaxTx[address(0)] = true (#1281)
- uniswapV2Router = _uniswapV2Router (#1272)
Reentrancy in LiquidityGeneratorToken.swapAndLiquify(uint256) (#1602-1623):
External calls:
- swapTokensForEth(half) (#1614)
- uniswapV2Router.swapExactTokensForETHSupportingFeeOnTransferTokens(tokenAmount,0,path,address(this),block.timestamp) (#1634-1640)
- addLiquidity(otherHalf,newBalance) (#1620)
- uniswapV2Router.addLiquidityETH{value: ethAmount}(address(this),tokenAmount,0,0,owner(),block.timestamp) (#1648-1655)
External calls sending eth:
- addLiquidity(otherHalf,newBalance) (#1620)
- uniswapV2Router.addLiquidityETH{value: ethAmount}(address(this),tokenAmount,0,0,owner(),block.timestamp) (#1648-1655)
State variables written after the call(s):
- addLiquidity(otherHalf,newBalance) (#1620)
- _allowances[owner][spender] = amount (#1548)
Reentrancy in LiquidityGeneratorToken.transferFrom(address,address,uint256) (#1321-1325):
External calls:
- _transfer(sender,recipient,amount) (#1322)
- uniswapV2Router.addLiquidityETH{value: ethAmount}(address(this),tokenAmount,0,0,owner(),block.timestamp) (#1648-1655)
- uniswapV2Router.swapExactTokensForETHSupportingFeeOnTransferTokens(tokenAmount,0,path,address(this),block.timestamp) (#1634-1640)
External calls sending eth:
- _transfer(sender,recipient,amount) (#1322)
- uniswapV2Router.addLiquidityETH{value: ethAmount}(address(this),tokenAmount,0,0,owner(),block.timestamp) (#1648-1655)
State variables written after the call(s):
- _approve(sender,_msgSender(),_allowances[sender][_msgSender()].sub(amount,ERC20: transfer amount exceeds allowance)) (#1323)
- _allowances[owner][spender] = amount (#1548)
Apply the check-effects-interactions pattern.

Additional information: link

Reentrancy in LiquidityGeneratorToken._transfer(address,address,uint256) (#1552-1600):
External calls:
- swapAndLiquify(contractTokenBalance) (#1587)
- uniswapV2Router.addLiquidityETH{value: ethAmount}(address(this),tokenAmount,0,0,owner(),block.timestamp) (#1648-1655)
- uniswapV2Router.swapExactTokensForETHSupportingFeeOnTransferTokens(tokenAmount,0,path,address(this),block.timestamp) (#1634-1640)
External calls sending eth:
- swapAndLiquify(contractTokenBalance) (#1587)
- uniswapV2Router.addLiquidityETH{value: ethAmount}(address(this),tokenAmount,0,0,owner(),block.timestamp) (#1648-1655)
Event emitted after the call(s):
- Transfer(_msgSender(),_charityAddress,tCharity) (#1505)
- _tokenTransfer(from,to,amount,takeFee) (#1599)
- Transfer(sender,recipient,tTransferAmount) (#1686)
- _tokenTransfer(from,to,amount,takeFee) (#1599)
- Transfer(sender,recipient,tTransferAmount) (#1697)
- _tokenTransfer(from,to,amount,takeFee) (#1599)
- Transfer(sender,recipient,tTransferAmount) (#1708)
- _tokenTransfer(from,to,amount,takeFee) (#1599)
- Transfer(sender,recipient,tTransferAmount) (#1403)
- _tokenTransfer(from,to,amount,takeFee) (#1599)
Reentrancy in LiquidityGeneratorToken.initialize(address,string,string,uint256,address,address,uint16,uint16,uint16,uint16) (#1220-1284):
External calls:
- uniswapV2Pair = IUniswapV2Factory(_uniswapV2Router.factory()).createPair(address(this),_uniswapV2Router.WETH()) (#1268-1269)
Event emitted after the call(s):
- Transfer(address(0),owner(),_tTotal) (#1283)
Reentrancy in LiquidityGeneratorToken.swapAndLiquify(uint256) (#1602-1623):
External calls:
- swapTokensForEth(half) (#1614)
- uniswapV2Router.swapExactTokensForETHSupportingFeeOnTransferTokens(tokenAmount,0,path,address(this),block.timestamp) (#1634-1640)
- addLiquidity(otherHalf,newBalance) (#1620)
- uniswapV2Router.addLiquidityETH{value: ethAmount}(address(this),tokenAmount,0,0,owner(),block.timestamp) (#1648-1655)
External calls sending eth:
- addLiquidity(otherHalf,newBalance) (#1620)
- uniswapV2Router.addLiquidityETH{value: ethAmount}(address(this),tokenAmount,0,0,owner(),block.timestamp) (#1648-1655)
Event emitted after the call(s):
- Approval(owner,spender,amount) (#1549)
- addLiquidity(otherHalf,newBalance) (#1620)
- SwapAndLiquify(half,newBalance,otherHalf) (#1622)
Reentrancy in LiquidityGeneratorToken.transferFrom(address,address,uint256) (#1321-1325):
External calls:
- _transfer(sender,recipient,amount) (#1322)
- uniswapV2Router.addLiquidityETH{value: ethAmount}(address(this),tokenAmount,0,0,owner(),block.timestamp) (#1648-1655)
- uniswapV2Router.swapExactTokensForETHSupportingFeeOnTransferTokens(tokenAmount,0,path,address(this),block.timestamp) (#1634-1640)
External calls sending eth:
- _transfer(sender,recipient,amount) (#1322)
- uniswapV2Router.addLiquidityETH{value: ethAmount}(address(this),tokenAmount,0,0,owner(),block.timestamp) (#1648-1655)
Event emitted after the call(s):
- Approval(owner,spender,amount) (#1549)
- _approve(sender,_msgSender(),_allowances[sender][_msgSender()].sub(amount,ERC20: transfer amount exceeds allowance)) (#1323)
Apply the check-effects-interactions pattern.

Additional information: link

AddressUpgradeable.isContract(address) (#108-117) uses assembly
- INLINE ASM (#115)
AddressUpgradeable._verifyCallResult(bool,bytes,string) (#229-246) uses assembly
- INLINE ASM (#238-241)
Address.isContract(address) (#664-673) uses assembly
- INLINE ASM (#671)
Address._verifyCallResult(bool,bytes,string) (#809-826) uses assembly
- INLINE ASM (#818-821)
Do not use evm assembly.

Additional information: link

Address._verifyCallResult(bool,bytes,string) (#809-826) is never used and should be removed
Address.functionCall(address,bytes) (#717-719) is never used and should be removed
Address.functionCall(address,bytes,string) (#727-729) is never used and should be removed
Address.functionCallWithValue(address,bytes,uint256) (#742-744) is never used and should be removed
Address.functionCallWithValue(address,bytes,uint256,string) (#752-759) is never used and should be removed
Address.functionDelegateCall(address,bytes) (#791-793) is never used and should be removed
Address.functionDelegateCall(address,bytes,string) (#801-807) is never used and should be removed
Address.functionStaticCall(address,bytes) (#767-769) is never used and should be removed
Address.functionStaticCall(address,bytes,string) (#777-783) is never used and should be removed
Address.isContract(address) (#664-673) is never used and should be removed
Address.sendValue(address,uint256) (#691-697) is never used and should be removed
AddressUpgradeable._verifyCallResult(bool,bytes,string) (#229-246) is never used and should be removed
AddressUpgradeable.functionCall(address,bytes) (#161-163) is never used and should be removed
AddressUpgradeable.functionCall(address,bytes,string) (#171-173) is never used and should be removed
AddressUpgradeable.functionCallWithValue(address,bytes,uint256) (#186-188) is never used and should be removed
AddressUpgradeable.functionCallWithValue(address,bytes,uint256,string) (#196-203) is never used and should be removed
AddressUpgradeable.functionStaticCall(address,bytes) (#211-213) is never used and should be removed
AddressUpgradeable.functionStaticCall(address,bytes,string) (#221-227) is never used and should be removed
AddressUpgradeable.sendValue(address,uint256) (#135-141) is never used and should be removed
ContextUpgradeable.__Context_init() (#325-327) is never used and should be removed
ContextUpgradeable._msgData() (#335-338) is never used and should be removed
SafeMath.div(uint256,uint256,string) (#611-614) is never used and should be removed
SafeMath.mod(uint256,uint256) (#573-576) is never used and should be removed
SafeMath.mod(uint256,uint256,string) (#631-634) is never used and should be removed
SafeMath.tryAdd(uint256,uint256) (#445-449) is never used and should be removed
SafeMath.tryDiv(uint256,uint256) (#481-484) is never used and should be removed
SafeMath.tryMod(uint256,uint256) (#491-494) is never used and should be removed
SafeMath.tryMul(uint256,uint256) (#466-474) is never used and should be removed
SafeMath.trySub(uint256,uint256) (#456-459) is never used and should be removed
Remove unused functions.

Additional information: link

LiquidityGeneratorToken._previousTaxFee (#1188) is set pre-construction with a non-constant function or state variable:
- _taxFee
LiquidityGeneratorToken._previousLiquidityFee (#1191) is set pre-construction with a non-constant function or state variable:
- _liquidityFee
LiquidityGeneratorToken._previousCharityFee (#1194) is set pre-construction with a non-constant function or state variable:
- _charityFee
Remove any initialization of state variables via non-constant state variables or function calls. If variables must be set upon contract deployment, locate initialization in the constructor instead.

Additional information: link

Low level call in AddressUpgradeable.sendValue(address,uint256) (#135-141):
- (success) = recipient.call{value: amount}() (#139)
Low level call in AddressUpgradeable.functionCallWithValue(address,bytes,uint256,string) (#196-203):
- (success,returndata) = target.call{value: value}(data) (#201)
Low level call in AddressUpgradeable.functionStaticCall(address,bytes,string) (#221-227):
- (success,returndata) = target.staticcall(data) (#225)
Low level call in Address.sendValue(address,uint256) (#691-697):
- (success) = recipient.call{value: amount}() (#695)
Low level call in Address.functionCallWithValue(address,bytes,uint256,string) (#752-759):
- (success,returndata) = target.call{value: value}(data) (#757)
Low level call in Address.functionStaticCall(address,bytes,string) (#777-783):
- (success,returndata) = target.staticcall(data) (#781)
Low level call in Address.functionDelegateCall(address,bytes,string) (#801-807):
- (success,returndata) = target.delegatecall(data) (#805)
Avoid low-level calls. Check the call success. If the call is meant for a contract, check for code existence

Additional information: link

Function ContextUpgradeable.__Context_init() (#325-327) is not in mixedCase
Function ContextUpgradeable.__Context_init_unchained() (#329-330) is not in mixedCase
Variable ContextUpgradeable.__gap (#339) is not in mixedCase
Function OwnableUpgradeable.__Ownable_init() (#370-373) is not in mixedCase
Function OwnableUpgradeable.__Ownable_init_unchained() (#375-379) is not in mixedCase
Variable OwnableUpgradeable.__gap (#417) is not in mixedCase
Function IUniswapV2Router01.WETH() (#872) is not in mixedCase
Function IUniswapV2Pair.DOMAIN_SEPARATOR() (#1095) is not in mixedCase
Function IUniswapV2Pair.PERMIT_TYPEHASH() (#1096) is not in mixedCase
Function IUniswapV2Pair.MINIMUM_LIQUIDITY() (#1113) is not in mixedCase
Parameter LiquidityGeneratorToken.setSwapAndLiquifyEnabled(bool)._enabled (#1437) is not in mixedCase
Parameter LiquidityGeneratorToken.calculateTaxFee(uint256)._amount (#1509) is not in mixedCase
Parameter LiquidityGeneratorToken.calculateLiquidityFee(uint256)._amount (#1513) is not in mixedCase
Parameter LiquidityGeneratorToken.calculateCharityFee(uint256)._amount (#1517) is not in mixedCase
Variable LiquidityGeneratorToken._taxFee (#1187) is not in mixedCase
Variable LiquidityGeneratorToken._liquidityFee (#1190) is not in mixedCase
Variable LiquidityGeneratorToken._charityFee (#1193) is not in mixedCase
Variable LiquidityGeneratorToken._charityAddress (#1198) is not in mixedCase
Variable LiquidityGeneratorToken._maxTxAmount (#1203) is not in mixedCase
Follow the Solidity naming convention.

Additional information: link

Redundant expression "this (#336)" inContextUpgradeable (#324-340)
Remove redundant statements if they congest code but offer no value.

Additional information: link

Variable IUniswapV2Router01.addLiquidity(address,address,uint256,uint256,uint256,uint256,address,uint256).amountADesired (#877) is too similar to IUniswapV2Router01.addLiquidity(address,address,uint256,uint256,uint256,uint256,address,uint256).amountBDesired (#878)
Variable LiquidityGeneratorToken._charityAddress (#1198) is too similar to LiquidityGeneratorToken.initialize(address,string,string,uint256,address,address,uint16,uint16,uint16,uint16).charityAddress_ (#1226)
Variable LiquidityGeneratorToken._charityFee (#1193) is too similar to LiquidityGeneratorToken._getTValues(uint256).tCharityFee (#1459)
Variable LiquidityGeneratorToken._charityAddress (#1198) is too similar to ILiquidityGeneratorToken.initialize(address,string,string,uint256,address,address,uint16,uint16,uint16,uint16).charityAddress_ (#1142)
Variable LiquidityGeneratorToken._getValues(uint256).rTransferAmount (#1452) is too similar to LiquidityGeneratorToken._getValues(uint256).tTransferAmount (#1451)
Variable LiquidityGeneratorToken._transferStandard(address,address,uint256).rTransferAmount (#1680) is too similar to LiquidityGeneratorToken._transferStandard(address,address,uint256).tTransferAmount (#1680)
Variable LiquidityGeneratorToken._transferBothExcluded(address,address,uint256).rTransferAmount (#1395) is too similar to LiquidityGeneratorToken._transferBothExcluded(address,address,uint256).tTransferAmount (#1395)
Variable LiquidityGeneratorToken._transferFromExcluded(address,address,uint256).rTransferAmount (#1701) is too similar to LiquidityGeneratorToken._getTValues(uint256).tTransferAmount (#1460)
Variable LiquidityGeneratorToken._transferStandard(address,address,uint256).rTransferAmount (#1680) is too similar to LiquidityGeneratorToken._transferFromExcluded(address,address,uint256).tTransferAmount (#1701)
Variable LiquidityGeneratorToken._transferToExcluded(address,address,uint256).rTransferAmount (#1690) is too similar to LiquidityGeneratorToken._getValues(uint256).tTransferAmount (#1451)
Variable LiquidityGeneratorToken._getValues(uint256).rTransferAmount (#1452) is too similar to LiquidityGeneratorToken._transferStandard(address,address,uint256).tTransferAmount (#1680)
Variable LiquidityGeneratorToken._transferStandard(address,address,uint256).rTransferAmount (#1680) is too similar to LiquidityGeneratorToken._transferBothExcluded(address,address,uint256).tTransferAmount (#1395)
Variable LiquidityGeneratorToken._getValues(uint256).rTransferAmount (#1452) is too similar to LiquidityGeneratorToken._transferToExcluded(address,address,uint256).tTransferAmount (#1690)
Variable LiquidityGeneratorToken._getValues(uint256).rTransferAmount (#1452) is too similar to LiquidityGeneratorToken._transferFromExcluded(address,address,uint256).tTransferAmount (#1701)
Variable LiquidityGeneratorToken._getRValues(uint256,uint256,uint256,uint256,uint256).rTransferAmount (#1469) is too similar to LiquidityGeneratorToken._transferBothExcluded(address,address,uint256).tTransferAmount (#1395)
Variable LiquidityGeneratorToken._transferToExcluded(address,address,uint256).rTransferAmount (#1690) is too similar to LiquidityGeneratorToken._transferStandard(address,address,uint256).tTransferAmount (#1680)
Variable LiquidityGeneratorToken._getValues(uint256).rTransferAmount (#1452) is too similar to LiquidityGeneratorToken._transferBothExcluded(address,address,uint256).tTransferAmount (#1395)
Variable LiquidityGeneratorToken._transferStandard(address,address,uint256).rTransferAmount (#1680) is too similar to LiquidityGeneratorToken._getTValues(uint256).tTransferAmount (#1460)
Variable LiquidityGeneratorToken._transferToExcluded(address,address,uint256).rTransferAmount (#1690) is too similar to LiquidityGeneratorToken._transferFromExcluded(address,address,uint256).tTransferAmount (#1701)
Variable LiquidityGeneratorToken._transferToExcluded(address,address,uint256).rTransferAmount (#1690) is too similar to LiquidityGeneratorToken._transferBothExcluded(address,address,uint256).tTransferAmount (#1395)
Variable LiquidityGeneratorToken._transferFromExcluded(address,address,uint256).rTransferAmount (#1701) is too similar to LiquidityGeneratorToken._transferStandard(address,address,uint256).tTransferAmount (#1680)
Variable LiquidityGeneratorToken._getValues(uint256).rTransferAmount (#1452) is too similar to LiquidityGeneratorToken._getTValues(uint256).tTransferAmount (#1460)
Variable LiquidityGeneratorToken.reflectionFromToken(uint256,bool).rTransferAmount (#1360) is too similar to LiquidityGeneratorToken._transferBothExcluded(address,address,uint256).tTransferAmount (#1395)
Variable LiquidityGeneratorToken._transferFromExcluded(address,address,uint256).rTransferAmount (#1701) is too similar to LiquidityGeneratorToken._transferFromExcluded(address,address,uint256).tTransferAmount (#1701)
Variable LiquidityGeneratorToken._transferFromExcluded(address,address,uint256).rTransferAmount (#1701) is too similar to LiquidityGeneratorToken._transferBothExcluded(address,address,uint256).tTransferAmount (#1395)
Variable LiquidityGeneratorToken._transferToExcluded(address,address,uint256).rTransferAmount (#1690) is too similar to LiquidityGeneratorToken._getTValues(uint256).tTransferAmount (#1460)
Variable LiquidityGeneratorToken.reflectionFromToken(uint256,bool).rTransferAmount (#1360) is too similar to LiquidityGeneratorToken._transferFromExcluded(address,address,uint256).tTransferAmount (#1701)
Variable LiquidityGeneratorToken._transferBothExcluded(address,address,uint256).rTransferAmount (#1395) is too similar to LiquidityGeneratorToken._transferFromExcluded(address,address,uint256).tTransferAmount (#1701)
Variable LiquidityGeneratorToken._getRValues(uint256,uint256,uint256,uint256,uint256).rTransferAmount (#1469) is too similar to LiquidityGeneratorToken._transferStandard(address,address,uint256).tTransferAmount (#1680)
Variable LiquidityGeneratorToken._getRValues(uint256,uint256,uint256,uint256,uint256).rTransferAmount (#1469) is too similar to LiquidityGeneratorToken._getValues(uint256).tTransferAmount (#1451)
Variable LiquidityGeneratorToken._transferStandard(address,address,uint256).rTransferAmount (#1680) is too similar to LiquidityGeneratorToken._getValues(uint256).tTransferAmount (#1451)
Variable LiquidityGeneratorToken._getRValues(uint256,uint256,uint256,uint256,uint256).rTransferAmount (#1469) is too similar to LiquidityGeneratorToken._transferFromExcluded(address,address,uint256).tTransferAmount (#1701)
Variable LiquidityGeneratorToken._getRValues(uint256,uint256,uint256,uint256,uint256).rTransferAmount (#1469) is too similar to LiquidityGeneratorToken._getTValues(uint256).tTransferAmount (#1460)
Variable LiquidityGeneratorToken._transferFromExcluded(address,address,uint256).rTransferAmount (#1701) is too similar to LiquidityGeneratorToken._getValues(uint256).tTransferAmount (#1451)
Variable LiquidityGeneratorToken.reflectionFromToken(uint256,bool).rTransferAmount (#1360) is too similar to LiquidityGeneratorToken._transferStandard(address,address,uint256).tTransferAmount (#1680)
Variable LiquidityGeneratorToken.reflectionFromToken(uint256,bool).rTransferAmount (#1360) is too similar to LiquidityGeneratorToken._getValues(uint256).tTransferAmount (#1451)
Variable LiquidityGeneratorToken._transferBothExcluded(address,address,uint256).rTransferAmount (#1395) is too similar to LiquidityGeneratorToken._getValues(uint256).tTransferAmount (#1451)
Variable LiquidityGeneratorToken._transferBothExcluded(address,address,uint256).rTransferAmount (#1395) is too similar to LiquidityGeneratorToken._transferStandard(address,address,uint256).tTransferAmount (#1680)
Variable LiquidityGeneratorToken.reflectionFromToken(uint256,bool).rTransferAmount (#1360) is too similar to LiquidityGeneratorToken._getTValues(uint256).tTransferAmount (#1460)
Variable LiquidityGeneratorToken._getRValues(uint256,uint256,uint256,uint256,uint256).rTransferAmount (#1469) is too similar to LiquidityGeneratorToken._transferToExcluded(address,address,uint256).tTransferAmount (#1690)
Variable LiquidityGeneratorToken._transferStandard(address,address,uint256).rTransferAmount (#1680) is too similar to LiquidityGeneratorToken._transferToExcluded(address,address,uint256).tTransferAmount (#1690)
Variable LiquidityGeneratorToken._transferBothExcluded(address,address,uint256).rTransferAmount (#1395) is too similar to LiquidityGeneratorToken._getTValues(uint256).tTransferAmount (#1460)
Variable LiquidityGeneratorToken._transferFromExcluded(address,address,uint256).rTransferAmount (#1701) is too similar to LiquidityGeneratorToken._transferToExcluded(address,address,uint256).tTransferAmount (#1690)
Variable LiquidityGeneratorToken._transferToExcluded(address,address,uint256).rTransferAmount (#1690) is too similar to LiquidityGeneratorToken._transferToExcluded(address,address,uint256).tTransferAmount (#1690)
Variable LiquidityGeneratorToken.reflectionFromToken(uint256,bool).rTransferAmount (#1360) is too similar to LiquidityGeneratorToken._transferToExcluded(address,address,uint256).tTransferAmount (#1690)
Variable LiquidityGeneratorToken._transferBothExcluded(address,address,uint256).rTransferAmount (#1395) is too similar to LiquidityGeneratorToken._transferToExcluded(address,address,uint256).tTransferAmount (#1690)
Prevent variables from having similar names.

Additional information: link

OwnableUpgradeable.__gap (#417) is never used in LiquidityGeneratorToken (#1165-1711)
Remove unused state variables.

Additional information: link

renounceOwnership() should be declared external:
- OwnableUpgradeable.renounceOwnership() (#403-406)
name() should be declared external:
- LiquidityGeneratorToken.name() (#1286-1288)
symbol() should be declared external:
- LiquidityGeneratorToken.symbol() (#1290-1292)
decimals() should be declared external:
- LiquidityGeneratorToken.decimals() (#1294-1296)
totalSupply() should be declared external:
- LiquidityGeneratorToken.totalSupply() (#1298-1300)
transfer(address,uint256) should be declared external:
- LiquidityGeneratorToken.transfer(address,uint256) (#1307-1310)
allowance(address,address) should be declared external:
- LiquidityGeneratorToken.allowance(address,address) (#1312-1314)
approve(address,uint256) should be declared external:
- LiquidityGeneratorToken.approve(address,uint256) (#1316-1319)
transferFrom(address,address,uint256) should be declared external:
- LiquidityGeneratorToken.transferFrom(address,address,uint256) (#1321-1325)
increaseAllowance(address,uint256) should be declared external:
- LiquidityGeneratorToken.increaseAllowance(address,uint256) (#1327-1330)
decreaseAllowance(address,uint256) should be declared external:
- LiquidityGeneratorToken.decreaseAllowance(address,uint256) (#1332-1335)
isExcludedFromReward(address) should be declared external:
- LiquidityGeneratorToken.isExcludedFromReward(address) (#1337-1339)
totalFees() should be declared external:
- LiquidityGeneratorToken.totalFees() (#1341-1343)
deliver(uint256) should be declared external:
- LiquidityGeneratorToken.deliver(uint256) (#1345-1352)
reflectionFromToken(uint256,bool) should be declared external:
- LiquidityGeneratorToken.reflectionFromToken(uint256,bool) (#1354-1363)
excludeFromReward(address) should be declared external:
- LiquidityGeneratorToken.excludeFromReward(address) (#1371-1379)
excludeFromFee(address) should be declared external:
- LiquidityGeneratorToken.excludeFromFee(address) (#1406-1408)
includeInFee(address) should be declared external:
- LiquidityGeneratorToken.includeInFee(address) (#1410-1412)
setExcludeFromMaxTx(address,bool) should be declared external:
- LiquidityGeneratorToken.setExcludeFromMaxTx(address,bool) (#1414-1416)
isExcludedFromMaxTx(address) should be declared external:
- LiquidityGeneratorToken.isExcludedFromMaxTx(address) (#1418-1420)
setSwapAndLiquifyEnabled(bool) should be declared external:
- LiquidityGeneratorToken.setSwapAndLiquifyEnabled(bool) (#1437-1440)
isExcludedFromFee(address) should be declared external:
- LiquidityGeneratorToken.isExcludedFromFee(address) (#1540-1542)
Use the external attribute for functions never called from the contract.

Additional information: link

Holders:


Average PancakeSwap trading volume, liqudity, number of swaps are extremely low. Token seems to be dead.


Number of Binance Smart Chain (BSC) token holders is low.


Token is deployed only at one blockchain


Token has only one trading pair


Unable to find PancakeSwap trading pair to compute liquidity.


Unable to find PancakeSwap trading pair to compute volume.


Unable to find PancakeSwap trading pair to compute number of swaps.


Unable to find Twitter account


Telegram account link seems to be invalid


Unable to find Blog account (Reddit or Medium)


Unable to find Youtube account


Unable to find Discord account


Unable to find token on CoinMarketCap

Additional information: link


BscScan page for the token does not contain additional info: website, socials, description, etc.

Additional information: link


Unable to find token on CoinGecko

Additional information: link


Unable to find token/project description on the website or on BscScan, CoinMarketCap


Unable to find token contract audit


Unable to find audit link on the website


Unable to find whitepaper link on the website


Unable to find Twitter link on the website


Unable to find token on CoinHunt

Additional information: link


Unable to find code repository for the project


Token has no active CoinGecko listing / rank


Token has no active CoinMarketCap listing / rank


Young tokens have high risks of price dump / death


Young tokens have high risks of price dump / death

Price for PULSEFLOKI