Nobo Finance is a powerful community-driven project/platform that aims to bring tremendous advancements to the cryptocurrency market. The ultimate goal is to establish itself as a reliable project and a household name in the Crypto Stratosphere. Our enduring wish is to provide our investors with a consistent and high price flow. We will create a secure DEX that will allow users to do the following: - Bridge Binance Smart Chain and Ethereum in a simple and cost-effective manner.- - Trade cryptocurrency tokens with affordable fees NoboSwap, our decentralized exchange, will launch in mid January 2022 to provide full service trading, staking, pooling, and an ICO launch capability. We will also develop NOBOF CEX to: - Trade all cryptocurrencies - Allow users to easily convert crypto to Fiat, send and receive fiat. With a total supply of 300 trillion tokens, built on the Binance Smart Chain, NOBF will provide real use cases for holders.
Unable to find manual contract audit (e.g. Certik, PeckShield, Solidity...)
LiquidityGeneratorToken.addLiquidity(uint256,uint256) (#1532-1545) sends eth to arbitrary user
Dangerous calls:
- uniswapV2Router.addLiquidityETH{value: ethAmount}(address(this),tokenAmount,0,0,owner(),block.timestamp) (#1537-1544)
Ensure that an arbitrary user cannot withdraw unauthorized funds.
Additional information: link
Reentrancy in LiquidityGeneratorToken._transfer(address,address,uint256) (#1451-1489):
External calls:
- swapAndLiquify(contractTokenBalance) (#1476)
- uniswapV2Router.addLiquidityETH{value: ethAmount}(address(this),tokenAmount,0,0,owner(),block.timestamp) (#1537-1544)
- uniswapV2Router.swapExactTokensForETHSupportingFeeOnTransferTokens(tokenAmount,0,path,address(this),block.timestamp) (#1523-1529)
External calls sending eth:
- swapAndLiquify(contractTokenBalance) (#1476)
- uniswapV2Router.addLiquidityETH{value: ethAmount}(address(this),tokenAmount,0,0,owner(),block.timestamp) (#1537-1544)
State variables written after the call(s):
- _tokenTransfer(from,to,amount,takeFee) (#1488)
- _rOwned[address(this)] = _rOwned[address(this)].add(rLiquidity) (#1378)
- _rOwned[_charityAddress] = _rOwned[_charityAddress].add(rCharity) (#1387)
- _rOwned[sender] = _rOwned[sender].sub(rAmount) (#1607)
- _rOwned[sender] = _rOwned[sender].sub(rAmount) (#1585)
- _rOwned[recipient] = _rOwned[recipient].add(rTransferAmount) (#1586)
- _rOwned[sender] = _rOwned[sender].sub(rAmount) (#1225)
- _rOwned[sender] = _rOwned[sender].sub(rAmount) (#1631)
- _rOwned[recipient] = _rOwned[recipient].add(rTransferAmount) (#1632)
- _rOwned[recipient] = _rOwned[recipient].add(rTransferAmount) (#1609)
- _rOwned[recipient] = _rOwned[recipient].add(rTransferAmount) (#1227)
- _tokenTransfer(from,to,amount,takeFee) (#1488)
- _rTotal = _rTotal.sub(rFee) (#1270)
- _tokenTransfer(from,to,amount,takeFee) (#1488)
- _tOwned[address(this)] = _tOwned[address(this)].add(tLiquidity) (#1380)
- _tOwned[_charityAddress] = _tOwned[_charityAddress].add(tCharity) (#1389-1391)
- _tOwned[sender] = _tOwned[sender].sub(tAmount) (#1630)
- _tOwned[sender] = _tOwned[sender].sub(tAmount) (#1224)
- _tOwned[recipient] = _tOwned[recipient].add(tTransferAmount) (#1608)
- _tOwned[recipient] = _tOwned[recipient].add(tTransferAmount) (#1226)
Apply the check-effects-interactions pattern.
Additional information: link
LiquidityGeneratorToken.constructor(string,string,uint256,address,address,uint16,uint16,uint16,address,uint256) (#972-1043) contains a tautology or contradiction:
- require(bool,string)(liquidityFeeBps_ >= 0,Invalid liquidity fee) (#985)
LiquidityGeneratorToken.constructor(string,string,uint256,address,address,uint16,uint16,uint16,address,uint256) (#972-1043) contains a tautology or contradiction:
- require(bool,string)(charityFeeBps_ >= 0,Invalid charity fee) (#986)
LiquidityGeneratorToken.constructor(string,string,uint256,address,address,uint16,uint16,uint16,address,uint256) (#972-1043) contains a tautology or contradiction:
- require(bool,string)(taxFeeBps_ >= 0,Invalid tax fee) (#984)
Fix the incorrect comparison by changing the value type or the comparison.
Additional information: link
Combination 1: Reentrancy vulnerabilities + Functions that send Ether to arbitraty destination. Usual for scams. May be justified by some complex mechanics (e.g. rebase, reflections). DYOR & manual audit are advised.
LiquidityGeneratorToken.addLiquidity(uint256,uint256) (#1532-1545) ignores return value by uniswapV2Router.addLiquidityETH{value: ethAmount}(address(this),tokenAmount,0,0,owner(),block.timestamp) (#1537-1544)
Ensure that all the return values of the function calls are used.
Additional information: link
LiquidityGeneratorToken.allowance(address,address).owner (#1075) shadows:
- Ownable.owner() (#146-148) (function)
LiquidityGeneratorToken._approve(address,address,uint256).owner (#1440) shadows:
- Ownable.owner() (#146-148) (function)
Rename the local variables that shadow another component.
Additional information: link
LiquidityGeneratorToken.setTaxFeePercent(uint256) (#1242-1248) should emit an event for:
- _taxFee = taxFeeBps (#1243)
LiquidityGeneratorToken.setLiquidityFeePercent(uint256) (#1250-1259) should emit an event for:
- _liquidityFee = liquidityFeeBps (#1254)
Emit an event for critical parameter changes.
Additional information: link
LiquidityGeneratorToken.constructor(string,string,uint256,address,address,uint16,uint16,uint16,address,uint256).serviceFeeReceiver_ (#981) lacks a zero-check on :
- address(serviceFeeReceiver_).transfer(serviceFee_) (#1042)
Check that the address is not zero.
Additional information: link
Reentrancy in LiquidityGeneratorToken._transfer(address,address,uint256) (#1451-1489):
External calls:
- swapAndLiquify(contractTokenBalance) (#1476)
- uniswapV2Router.addLiquidityETH{value: ethAmount}(address(this),tokenAmount,0,0,owner(),block.timestamp) (#1537-1544)
- uniswapV2Router.swapExactTokensForETHSupportingFeeOnTransferTokens(tokenAmount,0,path,address(this),block.timestamp) (#1523-1529)
External calls sending eth:
- swapAndLiquify(contractTokenBalance) (#1476)
- uniswapV2Router.addLiquidityETH{value: ethAmount}(address(this),tokenAmount,0,0,owner(),block.timestamp) (#1537-1544)
State variables written after the call(s):
- _tokenTransfer(from,to,amount,takeFee) (#1488)
- _charityFee = _previousCharityFee (#1432)
- _charityFee = 0 (#1426)
- _tokenTransfer(from,to,amount,takeFee) (#1488)
- _liquidityFee = _previousLiquidityFee (#1431)
- _liquidityFee = 0 (#1425)
- _tokenTransfer(from,to,amount,takeFee) (#1488)
- _previousCharityFee = _charityFee (#1422)
- _tokenTransfer(from,to,amount,takeFee) (#1488)
- _previousLiquidityFee = _liquidityFee (#1421)
- _tokenTransfer(from,to,amount,takeFee) (#1488)
- _previousTaxFee = _taxFee (#1420)
- _tokenTransfer(from,to,amount,takeFee) (#1488)
- _tFeeTotal = _tFeeTotal.add(tFee) (#1271)
- _tokenTransfer(from,to,amount,takeFee) (#1488)
- _taxFee = _previousTaxFee (#1430)
- _taxFee = 0 (#1424)
Reentrancy in LiquidityGeneratorToken.constructor(string,string,uint256,address,address,uint16,uint16,uint16,address,uint256) (#972-1043):
External calls:
- uniswapV2Pair = IUniswapV2Factory(_uniswapV2Router.factory()).createPair(address(this),_uniswapV2Router.WETH()) (#1023-1024)
State variables written after the call(s):
- _isExcludedFromFee[owner()] = true (#1030)
- _isExcludedFromFee[address(this)] = true (#1031)
- uniswapV2Router = _uniswapV2Router (#1027)
Reentrancy in LiquidityGeneratorToken.swapAndLiquify(uint256) (#1491-1512):
External calls:
- swapTokensForEth(half) (#1503)
- uniswapV2Router.swapExactTokensForETHSupportingFeeOnTransferTokens(tokenAmount,0,path,address(this),block.timestamp) (#1523-1529)
- addLiquidity(otherHalf,newBalance) (#1509)
- uniswapV2Router.addLiquidityETH{value: ethAmount}(address(this),tokenAmount,0,0,owner(),block.timestamp) (#1537-1544)
External calls sending eth:
- addLiquidity(otherHalf,newBalance) (#1509)
- uniswapV2Router.addLiquidityETH{value: ethAmount}(address(this),tokenAmount,0,0,owner(),block.timestamp) (#1537-1544)
State variables written after the call(s):
- addLiquidity(otherHalf,newBalance) (#1509)
- _allowances[owner][spender] = amount (#1447)
Reentrancy in LiquidityGeneratorToken.transferFrom(address,address,uint256) (#1093-1108):
External calls:
- _transfer(sender,recipient,amount) (#1098)
- uniswapV2Router.addLiquidityETH{value: ethAmount}(address(this),tokenAmount,0,0,owner(),block.timestamp) (#1537-1544)
- uniswapV2Router.swapExactTokensForETHSupportingFeeOnTransferTokens(tokenAmount,0,path,address(this),block.timestamp) (#1523-1529)
External calls sending eth:
- _transfer(sender,recipient,amount) (#1098)
- uniswapV2Router.addLiquidityETH{value: ethAmount}(address(this),tokenAmount,0,0,owner(),block.timestamp) (#1537-1544)
State variables written after the call(s):
- _approve(sender,_msgSender(),_allowances[sender][_msgSender()].sub(amount,ERC20: transfer amount exceeds allowance)) (#1099-1106)
- _allowances[owner][spender] = amount (#1447)
Apply the check-effects-interactions pattern.
Additional information: link
Reentrancy in LiquidityGeneratorToken._transfer(address,address,uint256) (#1451-1489):
External calls:
- swapAndLiquify(contractTokenBalance) (#1476)
- uniswapV2Router.addLiquidityETH{value: ethAmount}(address(this),tokenAmount,0,0,owner(),block.timestamp) (#1537-1544)
- uniswapV2Router.swapExactTokensForETHSupportingFeeOnTransferTokens(tokenAmount,0,path,address(this),block.timestamp) (#1523-1529)
External calls sending eth:
- swapAndLiquify(contractTokenBalance) (#1476)
- uniswapV2Router.addLiquidityETH{value: ethAmount}(address(this),tokenAmount,0,0,owner(),block.timestamp) (#1537-1544)
Event emitted after the call(s):
- Transfer(_msgSender(),_charityAddress,tCharity) (#1392)
- _tokenTransfer(from,to,amount,takeFee) (#1488)
- Transfer(sender,recipient,tTransferAmount) (#1590)
- _tokenTransfer(from,to,amount,takeFee) (#1488)
- Transfer(sender,recipient,tTransferAmount) (#1636)
- _tokenTransfer(from,to,amount,takeFee) (#1488)
- Transfer(sender,recipient,tTransferAmount) (#1613)
- _tokenTransfer(from,to,amount,takeFee) (#1488)
- Transfer(sender,recipient,tTransferAmount) (#1231)
- _tokenTransfer(from,to,amount,takeFee) (#1488)
Reentrancy in LiquidityGeneratorToken.constructor(string,string,uint256,address,address,uint16,uint16,uint16,address,uint256) (#972-1043):
External calls:
- uniswapV2Pair = IUniswapV2Factory(_uniswapV2Router.factory()).createPair(address(this),_uniswapV2Router.WETH()) (#1023-1024)
Event emitted after the call(s):
- TokenCreated(owner(),address(this),TokenType.liquidityGenerator,VERSION) (#1035-1040)
- Transfer(address(0),owner(),_tTotal) (#1033)
Reentrancy in LiquidityGeneratorToken.swapAndLiquify(uint256) (#1491-1512):
External calls:
- swapTokensForEth(half) (#1503)
- uniswapV2Router.swapExactTokensForETHSupportingFeeOnTransferTokens(tokenAmount,0,path,address(this),block.timestamp) (#1523-1529)
- addLiquidity(otherHalf,newBalance) (#1509)
- uniswapV2Router.addLiquidityETH{value: ethAmount}(address(this),tokenAmount,0,0,owner(),block.timestamp) (#1537-1544)
External calls sending eth:
- addLiquidity(otherHalf,newBalance) (#1509)
- uniswapV2Router.addLiquidityETH{value: ethAmount}(address(this),tokenAmount,0,0,owner(),block.timestamp) (#1537-1544)
Event emitted after the call(s):
- Approval(owner,spender,amount) (#1448)
- addLiquidity(otherHalf,newBalance) (#1509)
- SwapAndLiquify(half,newBalance,otherHalf) (#1511)
Reentrancy in LiquidityGeneratorToken.transferFrom(address,address,uint256) (#1093-1108):
External calls:
- _transfer(sender,recipient,amount) (#1098)
- uniswapV2Router.addLiquidityETH{value: ethAmount}(address(this),tokenAmount,0,0,owner(),block.timestamp) (#1537-1544)
- uniswapV2Router.swapExactTokensForETHSupportingFeeOnTransferTokens(tokenAmount,0,path,address(this),block.timestamp) (#1523-1529)
External calls sending eth:
- _transfer(sender,recipient,amount) (#1098)
- uniswapV2Router.addLiquidityETH{value: ethAmount}(address(this),tokenAmount,0,0,owner(),block.timestamp) (#1537-1544)
Event emitted after the call(s):
- Approval(owner,spender,amount) (#1448)
- _approve(sender,_msgSender(),_allowances[sender][_msgSender()].sub(amount,ERC20: transfer amount exceeds allowance)) (#1099-1106)
Apply the check-effects-interactions pattern.
Additional information: link
Address.isContract(address) (#441-451) uses assembly
- INLINE ASM (#447-449)
Address.verifyCallResult(bool,bytes,string) (#610-630) uses assembly
- INLINE ASM (#622-625)
Do not use evm assembly.
Additional information: link
LiquidityGeneratorToken.includeInReward(address) (#1197-1208) has costly operations inside a loop:
- _excluded.pop() (#1204)
Use a local variable to hold the loop computation result.
Additional information: link
Address.functionCall(address,bytes) (#494-496) is never used and should be removed
Address.functionCall(address,bytes,string) (#504-510) is never used and should be removed
Address.functionCallWithValue(address,bytes,uint256) (#523-529) is never used and should be removed
Address.functionCallWithValue(address,bytes,uint256,string) (#537-548) is never used and should be removed
Address.functionDelegateCall(address,bytes) (#583-585) is never used and should be removed
Address.functionDelegateCall(address,bytes,string) (#593-602) is never used and should be removed
Address.functionStaticCall(address,bytes) (#556-558) is never used and should be removed
Address.functionStaticCall(address,bytes,string) (#566-575) is never used and should be removed
Address.isContract(address) (#441-451) is never used and should be removed
Address.sendValue(address,uint256) (#469-474) is never used and should be removed
Address.verifyCallResult(bool,bytes,string) (#610-630) is never used and should be removed
Context._msgData() (#106-108) is never used and should be removed
SafeMath.div(uint256,uint256,string) (#376-385) is never used and should be removed
SafeMath.mod(uint256,uint256) (#336-338) is never used and should be removed
SafeMath.mod(uint256,uint256,string) (#402-411) is never used and should be removed
SafeMath.tryAdd(uint256,uint256) (#207-213) is never used and should be removed
SafeMath.tryDiv(uint256,uint256) (#249-254) is never used and should be removed
SafeMath.tryMod(uint256,uint256) (#261-266) is never used and should be removed
SafeMath.tryMul(uint256,uint256) (#232-242) is never used and should be removed
SafeMath.trySub(uint256,uint256) (#220-225) is never used and should be removed
Remove unused functions.
Additional information: link
LiquidityGeneratorToken._previousTaxFee (#941) is set pre-construction with a non-constant function or state variable:
- _taxFee
LiquidityGeneratorToken._previousLiquidityFee (#944) is set pre-construction with a non-constant function or state variable:
- _liquidityFee
LiquidityGeneratorToken._previousCharityFee (#947) is set pre-construction with a non-constant function or state variable:
- _charityFee
Remove any initialization of state variables via non-constant state variables or function calls. If variables must be set upon contract deployment, locate initialization in the constructor instead.
Additional information: link
Low level call in Address.sendValue(address,uint256) (#469-474):
- (success) = recipient.call{value: amount}() (#472)
Low level call in Address.functionCallWithValue(address,bytes,uint256,string) (#537-548):
- (success,returndata) = target.call{value: value}(data) (#546)
Low level call in Address.functionStaticCall(address,bytes,string) (#566-575):
- (success,returndata) = target.staticcall(data) (#573)
Low level call in Address.functionDelegateCall(address,bytes,string) (#593-602):
- (success,returndata) = target.delegatecall(data) (#600)
Avoid low-level calls. Check the call success. If the call is meant for a contract, check for code existence
Additional information: link
Function IUniswapV2Router01.WETH() (#641) is not in mixedCase
Parameter LiquidityGeneratorToken.setSwapAndLiquifyEnabled(bool)._enabled (#1261) is not in mixedCase
Parameter LiquidityGeneratorToken.calculateTaxFee(uint256)._amount (#1396) is not in mixedCase
Parameter LiquidityGeneratorToken.calculateLiquidityFee(uint256)._amount (#1400) is not in mixedCase
Parameter LiquidityGeneratorToken.calculateCharityFee(uint256)._amount (#1408) is not in mixedCase
Variable LiquidityGeneratorToken._taxFee (#940) is not in mixedCase
Variable LiquidityGeneratorToken._liquidityFee (#943) is not in mixedCase
Variable LiquidityGeneratorToken._charityFee (#946) is not in mixedCase
Variable LiquidityGeneratorToken._charityAddress (#951) is not in mixedCase
Follow the Solidity naming convention.
Additional information: link
Variable IUniswapV2Router01.addLiquidity(address,address,uint256,uint256,uint256,uint256,address,uint256).amountADesired (#646) is too similar to IUniswapV2Router01.addLiquidity(address,address,uint256,uint256,uint256,uint256,address,uint256).amountBDesired (#647)
Variable LiquidityGeneratorToken._charityAddress (#951) is too similar to LiquidityGeneratorToken.constructor(string,string,uint256,address,address,uint16,uint16,uint16,address,uint256).charityAddress_ (#977)
Variable LiquidityGeneratorToken._charityFee (#946) is too similar to LiquidityGeneratorToken._getTValues(uint256).tCharityFee (#1323)
Variable LiquidityGeneratorToken.reflectionFromToken(uint256,bool).rTransferAmount (#1169) is too similar to LiquidityGeneratorToken._transferStandard(address,address,uint256).tTransferAmount (#1580)
Variable LiquidityGeneratorToken._transferToExcluded(address,address,uint256).rTransferAmount (#1600) is too similar to LiquidityGeneratorToken._transferToExcluded(address,address,uint256).tTransferAmount (#1602)
Variable LiquidityGeneratorToken._getValues(uint256).rTransferAmount (#1293) is too similar to LiquidityGeneratorToken._transferStandard(address,address,uint256).tTransferAmount (#1580)
Variable LiquidityGeneratorToken._transferBothExcluded(address,address,uint256).rTransferAmount (#1217) is too similar to LiquidityGeneratorToken._transferFromExcluded(address,address,uint256).tTransferAmount (#1625)
Variable LiquidityGeneratorToken._transferBothExcluded(address,address,uint256).rTransferAmount (#1217) is too similar to LiquidityGeneratorToken._getTValues(uint256).tTransferAmount (#1324-1326)
Variable LiquidityGeneratorToken._transferToExcluded(address,address,uint256).rTransferAmount (#1600) is too similar to LiquidityGeneratorToken._transferFromExcluded(address,address,uint256).tTransferAmount (#1625)
Variable LiquidityGeneratorToken._transferToExcluded(address,address,uint256).rTransferAmount (#1600) is too similar to LiquidityGeneratorToken._getTValues(uint256).tTransferAmount (#1324-1326)
Variable LiquidityGeneratorToken.reflectionFromToken(uint256,bool).rTransferAmount (#1169) is too similar to LiquidityGeneratorToken._transferToExcluded(address,address,uint256).tTransferAmount (#1602)
Variable LiquidityGeneratorToken.reflectionFromToken(uint256,bool).rTransferAmount (#1169) is too similar to LiquidityGeneratorToken._transferFromExcluded(address,address,uint256).tTransferAmount (#1625)
Variable LiquidityGeneratorToken._getValues(uint256).rTransferAmount (#1293) is too similar to LiquidityGeneratorToken._transferFromExcluded(address,address,uint256).tTransferAmount (#1625)
Variable LiquidityGeneratorToken._transferFromExcluded(address,address,uint256).rTransferAmount (#1623) is too similar to LiquidityGeneratorToken._transferStandard(address,address,uint256).tTransferAmount (#1580)
Variable LiquidityGeneratorToken.reflectionFromToken(uint256,bool).rTransferAmount (#1169) is too similar to LiquidityGeneratorToken._getTValues(uint256).tTransferAmount (#1324-1326)
Variable LiquidityGeneratorToken._getValues(uint256).rTransferAmount (#1293) is too similar to LiquidityGeneratorToken._getTValues(uint256).tTransferAmount (#1324-1326)
Variable LiquidityGeneratorToken._transferBothExcluded(address,address,uint256).rTransferAmount (#1217) is too similar to LiquidityGeneratorToken._transferBothExcluded(address,address,uint256).tTransferAmount (#1219)
Variable LiquidityGeneratorToken._transferToExcluded(address,address,uint256).rTransferAmount (#1600) is too similar to LiquidityGeneratorToken._transferBothExcluded(address,address,uint256).tTransferAmount (#1219)
Variable LiquidityGeneratorToken._transferFromExcluded(address,address,uint256).rTransferAmount (#1623) is too similar to LiquidityGeneratorToken._transferFromExcluded(address,address,uint256).tTransferAmount (#1625)
Variable LiquidityGeneratorToken.reflectionFromToken(uint256,bool).rTransferAmount (#1169) is too similar to LiquidityGeneratorToken._transferBothExcluded(address,address,uint256).tTransferAmount (#1219)
Variable LiquidityGeneratorToken._transferFromExcluded(address,address,uint256).rTransferAmount (#1623) is too similar to LiquidityGeneratorToken._getTValues(uint256).tTransferAmount (#1324-1326)
Variable LiquidityGeneratorToken._transferBothExcluded(address,address,uint256).rTransferAmount (#1217) is too similar to LiquidityGeneratorToken._getValues(uint256).tTransferAmount (#1288)
Variable LiquidityGeneratorToken._transferToExcluded(address,address,uint256).rTransferAmount (#1600) is too similar to LiquidityGeneratorToken._getValues(uint256).tTransferAmount (#1288)
Variable LiquidityGeneratorToken.reflectionFromToken(uint256,bool).rTransferAmount (#1169) is too similar to LiquidityGeneratorToken._getValues(uint256).tTransferAmount (#1288)
Variable LiquidityGeneratorToken._transferStandard(address,address,uint256).rTransferAmount (#1578) is too similar to LiquidityGeneratorToken._transferStandard(address,address,uint256).tTransferAmount (#1580)
Variable LiquidityGeneratorToken._transferStandard(address,address,uint256).rTransferAmount (#1578) is too similar to LiquidityGeneratorToken._transferFromExcluded(address,address,uint256).tTransferAmount (#1625)
Variable LiquidityGeneratorToken._transferBothExcluded(address,address,uint256).rTransferAmount (#1217) is too similar to LiquidityGeneratorToken._transferStandard(address,address,uint256).tTransferAmount (#1580)
Variable LiquidityGeneratorToken._transferStandard(address,address,uint256).rTransferAmount (#1578) is too similar to LiquidityGeneratorToken._getTValues(uint256).tTransferAmount (#1324-1326)
Variable LiquidityGeneratorToken._transferToExcluded(address,address,uint256).rTransferAmount (#1600) is too similar to LiquidityGeneratorToken._transferStandard(address,address,uint256).tTransferAmount (#1580)
Variable LiquidityGeneratorToken._getRValues(uint256,uint256,uint256,uint256,uint256).rTransferAmount (#1349-1351) is too similar to LiquidityGeneratorToken._transferFromExcluded(address,address,uint256).tTransferAmount (#1625)
Variable LiquidityGeneratorToken._transferFromExcluded(address,address,uint256).rTransferAmount (#1623) is too similar to LiquidityGeneratorToken._getValues(uint256).tTransferAmount (#1288)
Variable LiquidityGeneratorToken._transferStandard(address,address,uint256).rTransferAmount (#1578) is too similar to LiquidityGeneratorToken._transferToExcluded(address,address,uint256).tTransferAmount (#1602)
Variable LiquidityGeneratorToken._getValues(uint256).rTransferAmount (#1293) is too similar to LiquidityGeneratorToken._getValues(uint256).tTransferAmount (#1288)
Variable LiquidityGeneratorToken._transferStandard(address,address,uint256).rTransferAmount (#1578) is too similar to LiquidityGeneratorToken._transferBothExcluded(address,address,uint256).tTransferAmount (#1219)
Variable LiquidityGeneratorToken._transferFromExcluded(address,address,uint256).rTransferAmount (#1623) is too similar to LiquidityGeneratorToken._transferToExcluded(address,address,uint256).tTransferAmount (#1602)
Variable LiquidityGeneratorToken._getRValues(uint256,uint256,uint256,uint256,uint256).rTransferAmount (#1349-1351) is too similar to LiquidityGeneratorToken._transferStandard(address,address,uint256).tTransferAmount (#1580)
Variable LiquidityGeneratorToken._getValues(uint256).rTransferAmount (#1293) is too similar to LiquidityGeneratorToken._transferToExcluded(address,address,uint256).tTransferAmount (#1602)
Variable LiquidityGeneratorToken._transferFromExcluded(address,address,uint256).rTransferAmount (#1623) is too similar to LiquidityGeneratorToken._transferBothExcluded(address,address,uint256).tTransferAmount (#1219)
Variable LiquidityGeneratorToken._transferBothExcluded(address,address,uint256).rTransferAmount (#1217) is too similar to LiquidityGeneratorToken._transferToExcluded(address,address,uint256).tTransferAmount (#1602)
Variable LiquidityGeneratorToken._getRValues(uint256,uint256,uint256,uint256,uint256).rTransferAmount (#1349-1351) is too similar to LiquidityGeneratorToken._getValues(uint256).tTransferAmount (#1288)
Variable LiquidityGeneratorToken._getValues(uint256).rTransferAmount (#1293) is too similar to LiquidityGeneratorToken._transferBothExcluded(address,address,uint256).tTransferAmount (#1219)
Variable LiquidityGeneratorToken._getRValues(uint256,uint256,uint256,uint256,uint256).rTransferAmount (#1349-1351) is too similar to LiquidityGeneratorToken._transferToExcluded(address,address,uint256).tTransferAmount (#1602)
Variable LiquidityGeneratorToken._getRValues(uint256,uint256,uint256,uint256,uint256).rTransferAmount (#1349-1351) is too similar to LiquidityGeneratorToken._transferBothExcluded(address,address,uint256).tTransferAmount (#1219)
Variable LiquidityGeneratorToken._getRValues(uint256,uint256,uint256,uint256,uint256).rTransferAmount (#1349-1351) is too similar to LiquidityGeneratorToken._getTValues(uint256).tTransferAmount (#1324-1326)
Variable LiquidityGeneratorToken._transferStandard(address,address,uint256).rTransferAmount (#1578) is too similar to LiquidityGeneratorToken._getValues(uint256).tTransferAmount (#1288)
Prevent variables from having similar names.
Additional information: link
renounceOwnership() should be declared external:
- Ownable.renounceOwnership() (#165-167)
transferOwnership(address) should be declared external:
- Ownable.transferOwnership(address) (#173-176)
name() should be declared external:
- LiquidityGeneratorToken.name() (#1045-1047)
symbol() should be declared external:
- LiquidityGeneratorToken.symbol() (#1049-1051)
decimals() should be declared external:
- LiquidityGeneratorToken.decimals() (#1053-1055)
totalSupply() should be declared external:
- LiquidityGeneratorToken.totalSupply() (#1057-1059)
transfer(address,uint256) should be declared external:
- LiquidityGeneratorToken.transfer(address,uint256) (#1066-1073)
allowance(address,address) should be declared external:
- LiquidityGeneratorToken.allowance(address,address) (#1075-1082)
approve(address,uint256) should be declared external:
- LiquidityGeneratorToken.approve(address,uint256) (#1084-1091)
transferFrom(address,address,uint256) should be declared external:
- LiquidityGeneratorToken.transferFrom(address,address,uint256) (#1093-1108)
increaseAllowance(address,uint256) should be declared external:
- LiquidityGeneratorToken.increaseAllowance(address,uint256) (#1110-1121)
decreaseAllowance(address,uint256) should be declared external:
- LiquidityGeneratorToken.decreaseAllowance(address,uint256) (#1123-1137)
isExcludedFromReward(address) should be declared external:
- LiquidityGeneratorToken.isExcludedFromReward(address) (#1139-1141)
totalFees() should be declared external:
- LiquidityGeneratorToken.totalFees() (#1143-1145)
deliver(uint256) should be declared external:
- LiquidityGeneratorToken.deliver(uint256) (#1147-1157)
reflectionFromToken(uint256,bool) should be declared external:
- LiquidityGeneratorToken.reflectionFromToken(uint256,bool) (#1159-1172)
excludeFromReward(address) should be declared external:
- LiquidityGeneratorToken.excludeFromReward(address) (#1187-1195)
excludeFromFee(address) should be declared external:
- LiquidityGeneratorToken.excludeFromFee(address) (#1234-1236)
includeInFee(address) should be declared external:
- LiquidityGeneratorToken.includeInFee(address) (#1238-1240)
setSwapAndLiquifyEnabled(bool) should be declared external:
- LiquidityGeneratorToken.setSwapAndLiquifyEnabled(bool) (#1261-1264)
isExcludedFromFee(address) should be declared external:
- LiquidityGeneratorToken.isExcludedFromFee(address) (#1435-1437)
Use the external attribute for functions never called from the contract.
Additional information: link
Number of Binance Smart Chain (BSC) token holders is less than 100. Token is either dead or inactive. Ignore for presale.
Average PancakeSwap trading volume, liqudity, number of swaps are extremely low. Token seems to be dead.
Token is deployed only at one blockchain
Token has only one trading pair
Unable to find PancakeSwap trading pair to compute liquidity.
Unable to find PancakeSwap trading pair to compute volume.
Unable to find PancakeSwap trading pair to compute number of swaps.
Unable to crawl data from the website
BscScan page for the token does not contain additional info: website, socials, description, etc.
Additional information: link
Unable to find token contract audit
Unable to verify token contract address on the website
Unable to find audit link on the website
Unable to find whitepaper link on the website
Unable to find Telegram link on the website
Unable to find Twitter link on the website
Unable to find token on CoinHunt
Additional information: link
Unable to find code repository for the project
Young tokens have high risks of price dump / death
Young tokens have high risks of scam / price dump / death
Young tokens have high risks of scam / price dump / death
Token has no active CoinGecko listing / rank
Token has relatively low CoinMarketCap rank
Telegram account link seems to be invalid
Twitter account link seems to be invalid
Unable to find Blog account (Reddit or Medium)
Unable to find Youtube account
Unable to find Discord account