MNM [Me and Models] Token

Unable to find manual contract audit (e.g. Certik, PeckShield, Solidity...)

MNM.addLiquidity(uint256,uint256) (#750-763) sends eth to arbitrary user
Dangerous calls:
- uniswapV2Router.addLiquidityETH{value: ethAmount}(address(this),tokenAmount,0,0,owner(),block.timestamp) (#755-762)
Ensure that an arbitrary user cannot withdraw unauthorized funds.

Additional information: link

Reentrancy in MNM._transfer(address,address,uint256) (#658-697):
External calls:
- swapAndLiquify(SavingsResults) (#679)
- uniswapV2Router.addLiquidityETH{value: ethAmount}(address(this),tokenAmount,0,0,owner(),block.timestamp) (#755-762)
- uniswapV2Router.swapExactTokensForETHSupportingFeeOnTransferTokens(tokenAmount,0,path,address(this),block.timestamp) (#739-745)
External calls sending eth:
- swapAndLiquify(SavingsResults) (#679)
- recipient.transfer(amount) (#622)
- uniswapV2Router.addLiquidityETH{value: ethAmount}(address(this),tokenAmount,0,0,owner(),block.timestamp) (#755-762)
State variables written after the call(s):
- _balances[sender] = _balances[sender].sub(amount,Insufficient Balance) (#684)
- _balances[recipient] = _balances[recipient].add(finalAmount) (#692)
- finalAmount = takeFee(sender,recipient,amount) (#686-687)
- _balances[address(this)] = _balances[address(this)].add(feeAmount) (#777)
Apply the check-effects-interactions pattern.

Additional information: link

Contract ownership is not renounced (belongs to a wallet)

Combination 1: Reentrancy vulnerabilities + Functions that send Ether to arbitraty destination. Usual for scams. May be justified by some complex mechanics (e.g. rebase, reflections). DYOR & manual audit are advised.

Redundant expression "this (#11)" inContext (#4-14)
Remove redundant statements if they congest code but offer no value.

Additional information: link

MNM.addLiquidity(uint256,uint256) (#750-763) ignores return value by uniswapV2Router.addLiquidityETH{value: ethAmount}(address(this),tokenAmount,0,0,owner(),block.timestamp) (#755-762)
Ensure that all the return values of the function calls are used.

Additional information: link

MNM.allowance(address,address).owner (#508) shadows:
- Ownable.owner() (#152-154) (function)
MNM._approve(address,address,uint256).owner (#531) shadows:
- Ownable.owner() (#152-154) (function)
Rename the local variables that shadow another component.

Additional information: link

MNM.setBuyTaxes(uint256,uint256,uint256) (#551-557) should emit an event for:
- _totalTaxIfBuying = _buyLiquidityFee.add(_buyMarketingFee).add(_buyTeamFee) (#556)
MNM.setSelTaxes(uint256,uint256,uint256) (#559-565) should emit an event for:
- _totalTaxIfSelling = _sellLiquidityFee.add(_sellMarketingFee).add(_sellTeamFee) (#564)
MNM.setDistributionSettings(uint256,uint256,uint256) (#567-573) should emit an event for:
- _liquidityShare = newLiquidityShare (#568)
- _teamShare = newTeamShare (#570)
- _totalDistributionShares = _liquidityShare.add(_marketingShare).add(_teamShare) (#572)
MNM.setMaxTxAmount(uint256) (#580-582) should emit an event for:
- _maxTxAmount = maxTxAmount (#581)
MNM.setWalletLimit(uint256) (#592-594) should emit an event for:
- _walletMax = newLimit (#593)
MNM.setNumTokensBeforeSwap(uint256) (#596-598) should emit an event for:
- minimumTokensBeforeSwap = newLimit (#597)
Emit an event for critical parameter changes.

Additional information: link

MNM.setMarketingWalletAddress(address).newAddress (#600) lacks a zero-check on :
- marketingWalletAddress = address(newAddress) (#601)
MNM.setTeamWalletAddress(address).newAddress (#604) lacks a zero-check on :
- teamWalletAddress = address(newAddress) (#605)
Check that the address is not zero.

Additional information: link

Reentrancy in MNM.changeRouterVersion(address) (#625-642):
External calls:
- newPairAddress = IUniswapV2Factory(_uniswapV2Router.factory()).createPair(address(this),_uniswapV2Router.WETH()) (#633-634)
State variables written after the call(s):
- isMarketPair[address(uniswapPair)] = true (#641)
- isWalletLimitExempt[address(uniswapPair)] = true (#640)
- uniswapPair = newPairAddress (#637)
- uniswapV2Router = _uniswapV2Router (#638)
Reentrancy in MNM.constructor() (#457-486):
External calls:
- uniswapPair = IUniswapV2Factory(_uniswapV2Router.factory()).createPair(address(this),_uniswapV2Router.WETH()) (#462-463)
State variables written after the call(s):
- _allowances[address(this)][address(uniswapV2Router)] = _totalSupply (#466)
- _balances[_msgSender()] = _totalSupply (#484)
- _totalDistributionShares = _liquidityShare.add(_marketingShare).add(_teamShare) (#473)
- _totalTaxIfBuying = _buyLiquidityFee.add(_buyMarketingFee).add(_buyTeamFee) (#471)
- _totalTaxIfSelling = _sellLiquidityFee.add(_sellMarketingFee).add(_sellTeamFee) (#472)
- isExcludedFromFee[owner()] = true (#468)
- isExcludedFromFee[address(this)] = true (#469)
- isMarketPair[address(uniswapPair)] = true (#482)
- isTxLimitExempt[owner()] = true (#479)
- isTxLimitExempt[address(this)] = true (#480)
- isWalletLimitExempt[owner()] = true (#475)
- isWalletLimitExempt[address(uniswapPair)] = true (#476)
- isWalletLimitExempt[address(this)] = true (#477)
- uniswapV2Router = _uniswapV2Router (#465)
Reentrancy in MNM.swapAndLiquify(uint256) (#706-728):
External calls:
- swapTokensForEth(tokensForSwap) (#711)
- uniswapV2Router.swapExactTokensForETHSupportingFeeOnTransferTokens(tokenAmount,0,path,address(this),block.timestamp) (#739-745)
- addLiquidity(tokensForLP,amountBNBLiquidity) (#727)
- uniswapV2Router.addLiquidityETH{value: ethAmount}(address(this),tokenAmount,0,0,owner(),block.timestamp) (#755-762)
External calls sending eth:
- transferToAddressETH(marketingWalletAddress,amountBNBMarketing) (#721)
- recipient.transfer(amount) (#622)
- transferToAddressETH(teamWalletAddress,amountBNBTeam) (#724)
- recipient.transfer(amount) (#622)
- addLiquidity(tokensForLP,amountBNBLiquidity) (#727)
- uniswapV2Router.addLiquidityETH{value: ethAmount}(address(this),tokenAmount,0,0,owner(),block.timestamp) (#755-762)
State variables written after the call(s):
- addLiquidity(tokensForLP,amountBNBLiquidity) (#727)
- _allowances[owner][spender] = amount (#535)
Reentrancy in MNM.transferFrom(address,address,uint256) (#652-656):
External calls:
- _transfer(sender,recipient,amount) (#653)
- uniswapV2Router.addLiquidityETH{value: ethAmount}(address(this),tokenAmount,0,0,owner(),block.timestamp) (#755-762)
- uniswapV2Router.swapExactTokensForETHSupportingFeeOnTransferTokens(tokenAmount,0,path,address(this),block.timestamp) (#739-745)
External calls sending eth:
- _transfer(sender,recipient,amount) (#653)
- recipient.transfer(amount) (#622)
- uniswapV2Router.addLiquidityETH{value: ethAmount}(address(this),tokenAmount,0,0,owner(),block.timestamp) (#755-762)
State variables written after the call(s):
- _approve(sender,_msgSender(),_allowances[sender][_msgSender()].sub(amount,ERC20: transfer amount exceeds allowance)) (#654)
- _allowances[owner][spender] = amount (#535)
Apply the check-effects-interactions pattern.

Additional information: link

Reentrancy in MNM._transfer(address,address,uint256) (#658-697):
External calls:
- swapAndLiquify(SavingsResults) (#679)
- uniswapV2Router.addLiquidityETH{value: ethAmount}(address(this),tokenAmount,0,0,owner(),block.timestamp) (#755-762)
- uniswapV2Router.swapExactTokensForETHSupportingFeeOnTransferTokens(tokenAmount,0,path,address(this),block.timestamp) (#739-745)
External calls sending eth:
- swapAndLiquify(SavingsResults) (#679)
- recipient.transfer(amount) (#622)
- uniswapV2Router.addLiquidityETH{value: ethAmount}(address(this),tokenAmount,0,0,owner(),block.timestamp) (#755-762)
Event emitted after the call(s):
- Transfer(sender,address(this),feeAmount) (#778)
- finalAmount = takeFee(sender,recipient,amount) (#686-687)
- Transfer(sender,recipient,finalAmount) (#694)
Reentrancy in MNM.constructor() (#457-486):
External calls:
- uniswapPair = IUniswapV2Factory(_uniswapV2Router.factory()).createPair(address(this),_uniswapV2Router.WETH()) (#462-463)
Event emitted after the call(s):
- Transfer(address(0),_msgSender(),_totalSupply) (#485)
Reentrancy in MNM.swapAndLiquify(uint256) (#706-728):
External calls:
- swapTokensForEth(tokensForSwap) (#711)
- uniswapV2Router.swapExactTokensForETHSupportingFeeOnTransferTokens(tokenAmount,0,path,address(this),block.timestamp) (#739-745)
- addLiquidity(tokensForLP,amountBNBLiquidity) (#727)
- uniswapV2Router.addLiquidityETH{value: ethAmount}(address(this),tokenAmount,0,0,owner(),block.timestamp) (#755-762)
External calls sending eth:
- transferToAddressETH(marketingWalletAddress,amountBNBMarketing) (#721)
- recipient.transfer(amount) (#622)
- transferToAddressETH(teamWalletAddress,amountBNBTeam) (#724)
- recipient.transfer(amount) (#622)
- addLiquidity(tokensForLP,amountBNBLiquidity) (#727)
- uniswapV2Router.addLiquidityETH{value: ethAmount}(address(this),tokenAmount,0,0,owner(),block.timestamp) (#755-762)
Event emitted after the call(s):
- Approval(owner,spender,amount) (#536)
- addLiquidity(tokensForLP,amountBNBLiquidity) (#727)
Reentrancy in MNM.swapTokensForEth(uint256) (#730-748):
External calls:
- uniswapV2Router.swapExactTokensForETHSupportingFeeOnTransferTokens(tokenAmount,0,path,address(this),block.timestamp) (#739-745)
Event emitted after the call(s):
- SwapTokensForETH(tokenAmount,path) (#747)
Reentrancy in MNM.transferFrom(address,address,uint256) (#652-656):
External calls:
- _transfer(sender,recipient,amount) (#653)
- uniswapV2Router.addLiquidityETH{value: ethAmount}(address(this),tokenAmount,0,0,owner(),block.timestamp) (#755-762)
- uniswapV2Router.swapExactTokensForETHSupportingFeeOnTransferTokens(tokenAmount,0,path,address(this),block.timestamp) (#739-745)
External calls sending eth:
- _transfer(sender,recipient,amount) (#653)
- recipient.transfer(amount) (#622)
- uniswapV2Router.addLiquidityETH{value: ethAmount}(address(this),tokenAmount,0,0,owner(),block.timestamp) (#755-762)
Event emitted after the call(s):
- Approval(owner,spender,amount) (#536)
- _approve(sender,_msgSender(),_allowances[sender][_msgSender()].sub(amount,ERC20: transfer amount exceeds allowance)) (#654)
Apply the check-effects-interactions pattern.

Additional information: link

Address.isContract(address) (#83-92) uses assembly
- INLINE ASM (#90)
Address._functionCallWithValue(address,bytes,uint256,string) (#119-136) uses assembly
- INLINE ASM (#128-131)
Do not use evm assembly.

Additional information: link

Address._functionCallWithValue(address,bytes,uint256,string) (#119-136) is never used and should be removed
Address.functionCall(address,bytes) (#102-104) is never used and should be removed
Address.functionCall(address,bytes,string) (#106-108) is never used and should be removed
Address.functionCallWithValue(address,bytes,uint256) (#110-112) is never used and should be removed
Address.functionCallWithValue(address,bytes,uint256,string) (#114-117) is never used and should be removed
Address.isContract(address) (#83-92) is never used and should be removed
Address.sendValue(address,uint256) (#94-100) is never used and should be removed
Context._msgData() (#10-13) is never used and should be removed
SafeMath.mod(uint256,uint256) (#71-73) is never used and should be removed
SafeMath.mod(uint256,uint256,string) (#75-78) is never used and should be removed
Remove unused functions.

Additional information: link

MNM._totalSupply (#419) is set pre-construction with a non-constant function or state variable:
- 1000000000 * 10 ** _decimals
MNM._maxTxAmount (#420) is set pre-construction with a non-constant function or state variable:
- 100000000 * 10 ** _decimals
MNM._walletMax (#421) is set pre-construction with a non-constant function or state variable:
- 1000000000 * 10 ** _decimals
MNM.minimumTokensBeforeSwap (#422) is set pre-construction with a non-constant function or state variable:
- 10000 * 10 ** _decimals
Remove any initialization of state variables via non-constant state variables or function calls. If variables must be set upon contract deployment, locate initialization in the constructor instead.

Additional information: link

Low level call in Address.sendValue(address,uint256) (#94-100):
- (success) = recipient.call{value: amount}() (#98)
Low level call in Address._functionCallWithValue(address,bytes,uint256,string) (#119-136):
- (success,returndata) = target.call{value: weiValue}(data) (#122)
Avoid low-level calls. Check the call success. If the call is meant for a contract, check for code existence

Additional information: link

Function IUniswapV2Pair.DOMAIN_SEPARATOR() (#209) is not in mixedCase
Function IUniswapV2Pair.PERMIT_TYPEHASH() (#210) is not in mixedCase
Function IUniswapV2Pair.MINIMUM_LIQUIDITY() (#226) is not in mixedCase
Function IUniswapV2Router01.WETH() (#245) is not in mixedCase
Parameter MNM.setSwapAndLiquifyEnabled(bool)._enabled (#608) is not in mixedCase
Variable MNM._balances (#391) is not in mixedCase
Variable MNM._buyLiquidityFee (#399) is not in mixedCase
Variable MNM._buyMarketingFee (#400) is not in mixedCase
Variable MNM._buyTeamFee (#401) is not in mixedCase
Variable MNM._sellLiquidityFee (#403) is not in mixedCase
Variable MNM._sellMarketingFee (#404) is not in mixedCase
Variable MNM._sellTeamFee (#405) is not in mixedCase
Variable MNM._liquidityShare (#407) is not in mixedCase
Variable MNM._marketingShare (#408) is not in mixedCase
Variable MNM._teamShare (#409) is not in mixedCase
Variable MNM._totalTaxIfBuying (#411) is not in mixedCase
Variable MNM._totalTaxIfSelling (#412) is not in mixedCase
Variable MNM._totalDistributionShares (#413) is not in mixedCase
Variable MNM._maxTxAmount (#420) is not in mixedCase
Variable MNM._walletMax (#421) is not in mixedCase
Follow the Solidity naming convention.

Additional information: link

Reentrancy in MNM._transfer(address,address,uint256) (#658-697):
External calls:
- swapAndLiquify(SavingsResults) (#679)
- recipient.transfer(amount) (#622)
External calls sending eth:
- swapAndLiquify(SavingsResults) (#679)
- recipient.transfer(amount) (#622)
- uniswapV2Router.addLiquidityETH{value: ethAmount}(address(this),tokenAmount,0,0,owner(),block.timestamp) (#755-762)
State variables written after the call(s):
- _balances[sender] = _balances[sender].sub(amount,Insufficient Balance) (#684)
- _balances[recipient] = _balances[recipient].add(finalAmount) (#692)
- finalAmount = takeFee(sender,recipient,amount) (#686-687)
- _balances[address(this)] = _balances[address(this)].add(feeAmount) (#777)
Event emitted after the call(s):
- Transfer(sender,address(this),feeAmount) (#778)
- finalAmount = takeFee(sender,recipient,amount) (#686-687)
- Transfer(sender,recipient,finalAmount) (#694)
Reentrancy in MNM.swapAndLiquify(uint256) (#706-728):
External calls:
- transferToAddressETH(marketingWalletAddress,amountBNBMarketing) (#721)
- recipient.transfer(amount) (#622)
- transferToAddressETH(teamWalletAddress,amountBNBTeam) (#724)
- recipient.transfer(amount) (#622)
External calls sending eth:
- transferToAddressETH(marketingWalletAddress,amountBNBMarketing) (#721)
- recipient.transfer(amount) (#622)
- transferToAddressETH(teamWalletAddress,amountBNBTeam) (#724)
- recipient.transfer(amount) (#622)
- addLiquidity(tokensForLP,amountBNBLiquidity) (#727)
- uniswapV2Router.addLiquidityETH{value: ethAmount}(address(this),tokenAmount,0,0,owner(),block.timestamp) (#755-762)
State variables written after the call(s):
- addLiquidity(tokensForLP,amountBNBLiquidity) (#727)
- _allowances[owner][spender] = amount (#535)
Event emitted after the call(s):
- Approval(owner,spender,amount) (#536)
- addLiquidity(tokensForLP,amountBNBLiquidity) (#727)
Reentrancy in MNM.transferFrom(address,address,uint256) (#652-656):
External calls:
- _transfer(sender,recipient,amount) (#653)
- recipient.transfer(amount) (#622)
External calls sending eth:
- _transfer(sender,recipient,amount) (#653)
- recipient.transfer(amount) (#622)
- uniswapV2Router.addLiquidityETH{value: ethAmount}(address(this),tokenAmount,0,0,owner(),block.timestamp) (#755-762)
State variables written after the call(s):
- _approve(sender,_msgSender(),_allowances[sender][_msgSender()].sub(amount,ERC20: transfer amount exceeds allowance)) (#654)
- _allowances[owner][spender] = amount (#535)
Event emitted after the call(s):
- Approval(owner,spender,amount) (#536)
- _approve(sender,_msgSender(),_allowances[sender][_msgSender()].sub(amount,ERC20: transfer amount exceeds allowance)) (#654)
Apply the check-effects-interactions pattern.

Additional information: link

Variable IUniswapV2Router01.addLiquidity(address,address,uint256,uint256,uint256,uint256,address,uint256).amountADesired (#250) is too similar to IUniswapV2Router01.addLiquidity(address,address,uint256,uint256,uint256,uint256,address,uint256).amountBDesired (#251)
Prevent variables from having similar names.

Additional information: link

Ownable.waiveOwnership() (#161-164) uses literals with too many digits:
- OwnershipTransferred(_owner,address(0x000000000000000000000000000000000000dEaD)) (#162)
Ownable.waiveOwnership() (#161-164) uses literals with too many digits:
- _owner = address(0x000000000000000000000000000000000000dEaD) (#163)
MNM.slitherConstructorVariables() (#378-785) uses literals with too many digits:
- deadAddress = 0x000000000000000000000000000000000000dEaD (#389)
MNM.slitherConstructorVariables() (#378-785) uses literals with too many digits:
- _totalSupply = 1000000000 * 10 ** _decimals (#419)
MNM.slitherConstructorVariables() (#378-785) uses literals with too many digits:
- _maxTxAmount = 100000000 * 10 ** _decimals (#420)
MNM.slitherConstructorVariables() (#378-785) uses literals with too many digits:
- _walletMax = 1000000000 * 10 ** _decimals (#421)
Use: Ether suffix, Time suffix, or The scientific notation

Additional information: link

Ownable.asdasd (#141) is never used in MNM (#378-785)
Ownable._lockTime (#142) is never used in MNM (#378-785)
Remove unused state variables.

Additional information: link

MNM._decimals (#385) should be constant
MNM._name (#383) should be constant
MNM._symbol (#384) should be constant
Ownable._lockTime (#142) should be constant
Ownable.asdasd (#141) should be constant
Add the constant attributes to state variables that never change.

Additional information: link

waiveOwnership() should be declared external:
- Ownable.waiveOwnership() (#161-164)
transferOwnership(address) should be declared external:
- Ownable.transferOwnership(address) (#166-170)
getTime() should be declared external:
- Ownable.getTime() (#172-174)
name() should be declared external:
- MNM.name() (#488-490)
symbol() should be declared external:
- MNM.symbol() (#492-494)
decimals() should be declared external:
- MNM.decimals() (#496-498)
totalSupply() should be declared external:
- MNM.totalSupply() (#500-502)
allowance(address,address) should be declared external:
- MNM.allowance(address,address) (#508-510)
increaseAllowance(address,uint256) should be declared external:
- MNM.increaseAllowance(address,uint256) (#512-515)
decreaseAllowance(address,uint256) should be declared external:
- MNM.decreaseAllowance(address,uint256) (#517-520)
minimumTokensBeforeSwapAmount() should be declared external:
- MNM.minimumTokensBeforeSwapAmount() (#522-524)
approve(address,uint256) should be declared external:
- MNM.approve(address,uint256) (#526-529)
setMarketPairStatus(address,bool) should be declared external:
- MNM.setMarketPairStatus(address,bool) (#539-541)
setIsExcludedFromFee(address,bool) should be declared external:
- MNM.setIsExcludedFromFee(address,bool) (#547-549)
setSwapAndLiquifyEnabled(bool) should be declared external:
- MNM.setSwapAndLiquifyEnabled(bool) (#608-611)
setSwapAndLiquifyByLimitOnly(bool) should be declared external:
- MNM.setSwapAndLiquifyByLimitOnly(bool) (#613-615)
getCirculatingSupply() should be declared external:
- MNM.getCirculatingSupply() (#617-619)
changeRouterVersion(address) should be declared external:
- MNM.changeRouterVersion(address) (#625-642)
transfer(address,uint256) should be declared external:
- MNM.transfer(address,uint256) (#647-650)
transferFrom(address,address,uint256) should be declared external:
- MNM.transferFrom(address,address,uint256) (#652-656)
Use the external attribute for functions never called from the contract.

Additional information: link

Token is deployed only at one blockchain

Token has only one trading pair

Contract has 7% buy tax and 6% sell tax.
Taxes are low but contract ownership is not renounced. Token has a high risk of becoming a honeypot.

Average 30d PancakeSwap liquidity is low.

Average 30d PancakeSwap volume is low.

Average 30d number of PancakeSwap swaps is low.

Number of Binance Smart Chain (BSC) token holders is low.

Unable to find website, listings and other project-related information

Young tokens have high risks of scam / price dump / death

Token has no active CoinGecko listing / rank

Token has no active CoinMarketCap listing / rank

Young tokens have high risks of scam / price dump / death