METASTAR Token

Reentrancy in MetaStarlink._transfer(address,address,uint256) (#1006-1050):
External calls:
- swapAndLiquify(contractTokenBalance) (#1037)
- uniswapV2Router.addLiquidityETH{value: ethAmount}(address(this),tokenAmount,0,0,owner(),block.timestamp) (#1098-1105)
- uniswapV2Router.swapExactTokensForETHSupportingFeeOnTransferTokens(tokenAmount,0,path,address(this),block.timestamp) (#1084-1090)
External calls sending eth:
- swapAndLiquify(contractTokenBalance) (#1037)
- uniswapV2Router.addLiquidityETH{value: ethAmount}(address(this),tokenAmount,0,0,owner(),block.timestamp) (#1098-1105)
State variables written after the call(s):
- _tokenTransfer(from,to,amount,takeFee) (#1049)
- _rOwned[address(this)] = _rOwned[address(this)].add(rLiquidity) (#962)
- _rOwned[sender] = _rOwned[sender].sub(rAmount) (#1131)
- _rOwned[sender] = _rOwned[sender].sub(rAmount) (#1140)
- _rOwned[sender] = _rOwned[sender].sub(rAmount) (#1151)
- _rOwned[sender] = _rOwned[sender].sub(rAmount) (#878)
- _rOwned[recipient] = _rOwned[recipient].add(rTransferAmount) (#1132)
- _rOwned[recipient] = _rOwned[recipient].add(rTransferAmount) (#1142)
- _rOwned[recipient] = _rOwned[recipient].add(rTransferAmount) (#1152)
- _rOwned[recipient] = _rOwned[recipient].add(rTransferAmount) (#880)
- _tokenTransfer(from,to,amount,takeFee) (#1049)
- _rTotal = _rTotal.sub(rFee) (#917)
- _tokenTransfer(from,to,amount,takeFee) (#1049)
- _tOwned[address(this)] = _tOwned[address(this)].add(tLiquidity) (#964)
- _tOwned[sender] = _tOwned[sender].sub(tAmount) (#877)
- _tOwned[sender] = _tOwned[sender].sub(tAmount) (#1150)
- _tOwned[recipient] = _tOwned[recipient].add(tTransferAmount) (#1141)
- _tOwned[recipient] = _tOwned[recipient].add(tTransferAmount) (#879)
Apply the check-effects-interactions pattern.

Additional information: link

Unable to find manual contract audit (e.g. Certik, PeckShield, Solidity...)

Variable IUniswapV2Router01.addLiquidity(address,address,uint256,uint256,uint256,uint256,address,uint256).amountADesired (#567) is too similar to IUniswapV2Router01.addLiquidity(address,address,uint256,uint256,uint256,uint256,address,uint256).amountBDesired (#568)
Variable MetaStarlink._transferStandard(address,address,uint256).rTransferAmount (#1130) is too similar to MetaStarlink._transferBothExcluded(address,address,uint256).tTransferAmount (#876)
Variable MetaStarlink._transferToExcluded(address,address,uint256).rTransferAmount (#1139) is too similar to MetaStarlink._getValues(uint256).tTransferAmount (#922)
Variable MetaStarlink._getRValues(uint256,uint256,uint256,uint256).rTransferAmount (#938) is too similar to MetaStarlink._transferStandard(address,address,uint256).tTransferAmount (#1130)
Variable MetaStarlink._transferToExcluded(address,address,uint256).rTransferAmount (#1139) is too similar to MetaStarlink._transferToExcluded(address,address,uint256).tTransferAmount (#1139)
Variable MetaStarlink.reflectionFromToken(uint256,bool).rTransferAmount (#843) is too similar to MetaStarlink._transferBothExcluded(address,address,uint256).tTransferAmount (#876)
Variable MetaStarlink._transferFromExcluded(address,address,uint256).rTransferAmount (#1149) is too similar to MetaStarlink._transferStandard(address,address,uint256).tTransferAmount (#1130)
Variable MetaStarlink._getRValues(uint256,uint256,uint256,uint256).rTransferAmount (#938) is too similar to MetaStarlink._transferBothExcluded(address,address,uint256).tTransferAmount (#876)
Variable MetaStarlink._transferToExcluded(address,address,uint256).rTransferAmount (#1139) is too similar to MetaStarlink._getTValues(uint256).tTransferAmount (#930)
Variable MetaStarlink._transferFromExcluded(address,address,uint256).rTransferAmount (#1149) is too similar to MetaStarlink._transferBothExcluded(address,address,uint256).tTransferAmount (#876)
Variable MetaStarlink._transferBothExcluded(address,address,uint256).rTransferAmount (#876) is too similar to MetaStarlink._transferBothExcluded(address,address,uint256).tTransferAmount (#876)
Variable MetaStarlink._transferFromExcluded(address,address,uint256).rTransferAmount (#1149) is too similar to MetaStarlink._getValues(uint256).tTransferAmount (#922)
Variable MetaStarlink._getValues(uint256).rTransferAmount (#923) is too similar to MetaStarlink._transferBothExcluded(address,address,uint256).tTransferAmount (#876)
Variable MetaStarlink._transferToExcluded(address,address,uint256).rTransferAmount (#1139) is too similar to MetaStarlink._transferStandard(address,address,uint256).tTransferAmount (#1130)
Variable MetaStarlink._transferToExcluded(address,address,uint256).rTransferAmount (#1139) is too similar to MetaStarlink._transferFromExcluded(address,address,uint256).tTransferAmount (#1149)
Variable MetaStarlink._transferToExcluded(address,address,uint256).rTransferAmount (#1139) is too similar to MetaStarlink._transferBothExcluded(address,address,uint256).tTransferAmount (#876)
Variable MetaStarlink._transferStandard(address,address,uint256).rTransferAmount (#1130) is too similar to MetaStarlink._transferStandard(address,address,uint256).tTransferAmount (#1130)
Variable MetaStarlink._getRValues(uint256,uint256,uint256,uint256).rTransferAmount (#938) is too similar to MetaStarlink._getTValues(uint256).tTransferAmount (#930)
Variable MetaStarlink.reflectionFromToken(uint256,bool).rTransferAmount (#843) is too similar to MetaStarlink._transferToExcluded(address,address,uint256).tTransferAmount (#1139)
Variable MetaStarlink._transferBothExcluded(address,address,uint256).rTransferAmount (#876) is too similar to MetaStarlink._transferToExcluded(address,address,uint256).tTransferAmount (#1139)
Variable MetaStarlink._getValues(uint256).rTransferAmount (#923) is too similar to MetaStarlink._getTValues(uint256).tTransferAmount (#930)
Variable MetaStarlink.reflectionFromToken(uint256,bool).rTransferAmount (#843) is too similar to MetaStarlink._transferStandard(address,address,uint256).tTransferAmount (#1130)
Variable MetaStarlink._transferBothExcluded(address,address,uint256).rTransferAmount (#876) is too similar to MetaStarlink._transferStandard(address,address,uint256).tTransferAmount (#1130)
Variable MetaStarlink._transferStandard(address,address,uint256).rTransferAmount (#1130) is too similar to MetaStarlink._getTValues(uint256).tTransferAmount (#930)
Variable MetaStarlink._transferFromExcluded(address,address,uint256).rTransferAmount (#1149) is too similar to MetaStarlink._transferFromExcluded(address,address,uint256).tTransferAmount (#1149)
Variable MetaStarlink.reflectionFromToken(uint256,bool).rTransferAmount (#843) is too similar to MetaStarlink._getTValues(uint256).tTransferAmount (#930)
Variable MetaStarlink._transferBothExcluded(address,address,uint256).rTransferAmount (#876) is too similar to MetaStarlink._getTValues(uint256).tTransferAmount (#930)
Variable MetaStarlink._getRValues(uint256,uint256,uint256,uint256).rTransferAmount (#938) is too similar to MetaStarlink._transferFromExcluded(address,address,uint256).tTransferAmount (#1149)
Variable MetaStarlink._getRValues(uint256,uint256,uint256,uint256).rTransferAmount (#938) is too similar to MetaStarlink._getValues(uint256).tTransferAmount (#922)
Variable MetaStarlink._getValues(uint256).rTransferAmount (#923) is too similar to MetaStarlink._transferFromExcluded(address,address,uint256).tTransferAmount (#1149)
Variable MetaStarlink._transferFromExcluded(address,address,uint256).rTransferAmount (#1149) is too similar to MetaStarlink._transferToExcluded(address,address,uint256).tTransferAmount (#1139)
Variable MetaStarlink._getValues(uint256).rTransferAmount (#923) is too similar to MetaStarlink._getValues(uint256).tTransferAmount (#922)
Variable MetaStarlink._getRValues(uint256,uint256,uint256,uint256).rTransferAmount (#938) is too similar to MetaStarlink._transferToExcluded(address,address,uint256).tTransferAmount (#1139)
Variable MetaStarlink._transferStandard(address,address,uint256).rTransferAmount (#1130) is too similar to MetaStarlink._transferFromExcluded(address,address,uint256).tTransferAmount (#1149)
Variable MetaStarlink._transferStandard(address,address,uint256).rTransferAmount (#1130) is too similar to MetaStarlink._getValues(uint256).tTransferAmount (#922)
Variable MetaStarlink._getValues(uint256).rTransferAmount (#923) is too similar to MetaStarlink._transferToExcluded(address,address,uint256).tTransferAmount (#1139)
Variable MetaStarlink.reflectionFromToken(uint256,bool).rTransferAmount (#843) is too similar to MetaStarlink._transferFromExcluded(address,address,uint256).tTransferAmount (#1149)
Variable MetaStarlink._transferBothExcluded(address,address,uint256).rTransferAmount (#876) is too similar to MetaStarlink._transferFromExcluded(address,address,uint256).tTransferAmount (#1149)
Variable MetaStarlink.reflectionFromToken(uint256,bool).rTransferAmount (#843) is too similar to MetaStarlink._getValues(uint256).tTransferAmount (#922)
Variable MetaStarlink._transferBothExcluded(address,address,uint256).rTransferAmount (#876) is too similar to MetaStarlink._getValues(uint256).tTransferAmount (#922)
Variable MetaStarlink._getValues(uint256).rTransferAmount (#923) is too similar to MetaStarlink._transferStandard(address,address,uint256).tTransferAmount (#1130)
Variable MetaStarlink._transferStandard(address,address,uint256).rTransferAmount (#1130) is too similar to MetaStarlink._transferToExcluded(address,address,uint256).tTransferAmount (#1139)
Variable MetaStarlink._transferFromExcluded(address,address,uint256).rTransferAmount (#1149) is too similar to MetaStarlink._getTValues(uint256).tTransferAmount (#930)
Prevent variables from having similar names.

Additional information: link

MetaStarlink.slitherConstructorVariables() (#700-1162) uses literals with too many digits:
- _tTotal = 100000000000 * 10 ** 6 * 10 ** 9 (#714)
MetaStarlink.slitherConstructorVariables() (#700-1162) uses literals with too many digits:
- _maxTxAmount = 50000000000 * 10 ** 6 * 10 ** 9 (#734)
MetaStarlink.slitherConstructorVariables() (#700-1162) uses literals with too many digits:
- numTokensSellToAddToLiquidity = 5000000000 * 10 ** 6 * 10 ** 9 (#735)
Use: Ether suffix, Time suffix, or The scientific notation

Additional information: link

MetaStarlink._decimals (#720) should be constant
MetaStarlink._name (#718) should be constant
MetaStarlink._symbol (#719) should be constant
MetaStarlink._tTotal (#714) should be constant
MetaStarlink.numTokensSellToAddToLiquidity (#735) should be constant
Add the constant attributes to state variables that never change.

Additional information: link

MetaStarlink.addLiquidity(uint256,uint256) (#1093-1106) ignores return value by uniswapV2Router.addLiquidityETH{value: ethAmount}(address(this),tokenAmount,0,0,owner(),block.timestamp) (#1098-1105)
Ensure that all the return values of the function calls are used.

Additional information: link

MetaStarlink.allowance(address,address).owner (#795) shadows:
- Ownable.owner() (#431-433) (function)
MetaStarlink._approve(address,address,uint256).owner (#998) shadows:
- Ownable.owner() (#431-433) (function)
Rename the local variables that shadow another component.

Additional information: link

MetaStarlink.setTaxFeePercent(uint256) (#894-896) should emit an event for:
- _taxFee = taxFee (#895)
MetaStarlink.setLiquidityFeePercent(uint256) (#898-900) should emit an event for:
- _liquidityFee = liquidityFee (#899)
MetaStarlink.setMaxTxPercent(uint256) (#902-906) should emit an event for:
- _maxTxAmount = _tTotal.mul(maxTxPercent).div(10 ** 2) (#903-905)
Emit an event for critical parameter changes.

Additional information: link

Reentrancy in MetaStarlink._transfer(address,address,uint256) (#1006-1050):
External calls:
- swapAndLiquify(contractTokenBalance) (#1037)
- uniswapV2Router.addLiquidityETH{value: ethAmount}(address(this),tokenAmount,0,0,owner(),block.timestamp) (#1098-1105)
- uniswapV2Router.swapExactTokensForETHSupportingFeeOnTransferTokens(tokenAmount,0,path,address(this),block.timestamp) (#1084-1090)
External calls sending eth:
- swapAndLiquify(contractTokenBalance) (#1037)
- uniswapV2Router.addLiquidityETH{value: ethAmount}(address(this),tokenAmount,0,0,owner(),block.timestamp) (#1098-1105)
State variables written after the call(s):
- _tokenTransfer(from,to,amount,takeFee) (#1049)
- _liquidityFee = _previousLiquidityFee (#991)
- _liquidityFee = 0 (#986)
- _tokenTransfer(from,to,amount,takeFee) (#1049)
- _previousLiquidityFee = _liquidityFee (#983)
- _tokenTransfer(from,to,amount,takeFee) (#1049)
- _previousTaxFee = _taxFee (#982)
- _tokenTransfer(from,to,amount,takeFee) (#1049)
- _tFeeTotal = _tFeeTotal.add(tFee) (#918)
- _tokenTransfer(from,to,amount,takeFee) (#1049)
- _taxFee = _previousTaxFee (#990)
- _taxFee = 0 (#985)
Reentrancy in MetaStarlink.constructor() (#751-767):
External calls:
- uniswapV2Pair = IUniswapV2Factory(_uniswapV2Router.factory()).createPair(address(this),_uniswapV2Router.WETH()) (#756-757)
State variables written after the call(s):
- _isExcludedFromFee[owner()] = true (#763)
- _isExcludedFromFee[address(this)] = true (#764)
- uniswapV2Router = _uniswapV2Router (#760)
Reentrancy in MetaStarlink.swapAndLiquify(uint256) (#1052-1073):
External calls:
- swapTokensForEth(half) (#1064)
- uniswapV2Router.swapExactTokensForETHSupportingFeeOnTransferTokens(tokenAmount,0,path,address(this),block.timestamp) (#1084-1090)
- addLiquidity(otherHalf,newBalance) (#1070)
- uniswapV2Router.addLiquidityETH{value: ethAmount}(address(this),tokenAmount,0,0,owner(),block.timestamp) (#1098-1105)
External calls sending eth:
- addLiquidity(otherHalf,newBalance) (#1070)
- uniswapV2Router.addLiquidityETH{value: ethAmount}(address(this),tokenAmount,0,0,owner(),block.timestamp) (#1098-1105)
State variables written after the call(s):
- addLiquidity(otherHalf,newBalance) (#1070)
- _allowances[owner][spender] = amount (#1002)
Reentrancy in MetaStarlink.transferFrom(address,address,uint256) (#804-808):
External calls:
- _transfer(sender,recipient,amount) (#805)
- uniswapV2Router.addLiquidityETH{value: ethAmount}(address(this),tokenAmount,0,0,owner(),block.timestamp) (#1098-1105)
- uniswapV2Router.swapExactTokensForETHSupportingFeeOnTransferTokens(tokenAmount,0,path,address(this),block.timestamp) (#1084-1090)
External calls sending eth:
- _transfer(sender,recipient,amount) (#805)
- uniswapV2Router.addLiquidityETH{value: ethAmount}(address(this),tokenAmount,0,0,owner(),block.timestamp) (#1098-1105)
State variables written after the call(s):
- _approve(sender,_msgSender(),_allowances[sender][_msgSender()].sub(amount,ERC20: transfer amount exceeds allowance)) (#806)
- _allowances[owner][spender] = amount (#1002)
Apply the check-effects-interactions pattern.

Additional information: link

Reentrancy in MetaStarlink._transfer(address,address,uint256) (#1006-1050):
External calls:
- swapAndLiquify(contractTokenBalance) (#1037)
- uniswapV2Router.addLiquidityETH{value: ethAmount}(address(this),tokenAmount,0,0,owner(),block.timestamp) (#1098-1105)
- uniswapV2Router.swapExactTokensForETHSupportingFeeOnTransferTokens(tokenAmount,0,path,address(this),block.timestamp) (#1084-1090)
External calls sending eth:
- swapAndLiquify(contractTokenBalance) (#1037)
- uniswapV2Router.addLiquidityETH{value: ethAmount}(address(this),tokenAmount,0,0,owner(),block.timestamp) (#1098-1105)
Event emitted after the call(s):
- Transfer(sender,recipient,tTransferAmount) (#1135)
- _tokenTransfer(from,to,amount,takeFee) (#1049)
- Transfer(sender,recipient,tTransferAmount) (#1145)
- _tokenTransfer(from,to,amount,takeFee) (#1049)
- Transfer(sender,recipient,tTransferAmount) (#1155)
- _tokenTransfer(from,to,amount,takeFee) (#1049)
- Transfer(sender,recipient,tTransferAmount) (#883)
- _tokenTransfer(from,to,amount,takeFee) (#1049)
Reentrancy in MetaStarlink.constructor() (#751-767):
External calls:
- uniswapV2Pair = IUniswapV2Factory(_uniswapV2Router.factory()).createPair(address(this),_uniswapV2Router.WETH()) (#756-757)
Event emitted after the call(s):
- Transfer(address(0),_msgSender(),_tTotal) (#766)
Reentrancy in MetaStarlink.swapAndLiquify(uint256) (#1052-1073):
External calls:
- swapTokensForEth(half) (#1064)
- uniswapV2Router.swapExactTokensForETHSupportingFeeOnTransferTokens(tokenAmount,0,path,address(this),block.timestamp) (#1084-1090)
- addLiquidity(otherHalf,newBalance) (#1070)
- uniswapV2Router.addLiquidityETH{value: ethAmount}(address(this),tokenAmount,0,0,owner(),block.timestamp) (#1098-1105)
External calls sending eth:
- addLiquidity(otherHalf,newBalance) (#1070)
- uniswapV2Router.addLiquidityETH{value: ethAmount}(address(this),tokenAmount,0,0,owner(),block.timestamp) (#1098-1105)
Event emitted after the call(s):
- Approval(owner,spender,amount) (#1003)
- addLiquidity(otherHalf,newBalance) (#1070)
- SwapAndLiquify(half,newBalance,otherHalf) (#1072)
Reentrancy in MetaStarlink.transferFrom(address,address,uint256) (#804-808):
External calls:
- _transfer(sender,recipient,amount) (#805)
- uniswapV2Router.addLiquidityETH{value: ethAmount}(address(this),tokenAmount,0,0,owner(),block.timestamp) (#1098-1105)
- uniswapV2Router.swapExactTokensForETHSupportingFeeOnTransferTokens(tokenAmount,0,path,address(this),block.timestamp) (#1084-1090)
External calls sending eth:
- _transfer(sender,recipient,amount) (#805)
- uniswapV2Router.addLiquidityETH{value: ethAmount}(address(this),tokenAmount,0,0,owner(),block.timestamp) (#1098-1105)
Event emitted after the call(s):
- Approval(owner,spender,amount) (#1003)
- _approve(sender,_msgSender(),_allowances[sender][_msgSender()].sub(amount,ERC20: transfer amount exceeds allowance)) (#806)
Apply the check-effects-interactions pattern.

Additional information: link

Ownable.unlock() (#478-483) uses timestamp for comparisons
Dangerous comparisons:
- require(bool,string)(now > _lockTime,Contract is locked until 7 days) (#480)
Avoid relying on block.timestamp.

Additional information: link

Address.isContract(address) (#283-292) uses assembly
- INLINE ASM (#290)
Address._functionCallWithValue(address,bytes,uint256,string) (#376-397) uses assembly
- INLINE ASM (#389-392)
Do not use evm assembly.

Additional information: link

MetaStarlink.includeInReward(address) (#863-874) has costly operations inside a loop:
- _excluded.pop() (#870)
Use a local variable to hold the loop computation result.

Additional information: link

Address._functionCallWithValue(address,bytes,uint256,string) (#376-397) is never used and should be removed
Address.functionCall(address,bytes) (#336-338) is never used and should be removed
Address.functionCall(address,bytes,string) (#346-348) is never used and should be removed
Address.functionCallWithValue(address,bytes,uint256) (#361-363) is never used and should be removed
Address.functionCallWithValue(address,bytes,uint256,string) (#371-374) is never used and should be removed
Address.isContract(address) (#283-292) is never used and should be removed
Address.sendValue(address,uint256) (#310-316) is never used and should be removed
Context._msgData() (#255-258) is never used and should be removed
SafeMath.mod(uint256,uint256) (#228-230) is never used and should be removed
SafeMath.mod(uint256,uint256,string) (#244-247) is never used and should be removed
Remove unused functions.

Additional information: link

MetaStarlink._rTotal (#715) is set pre-construction with a non-constant function or state variable:
- (MAX - (MAX % _tTotal))
MetaStarlink._previousTaxFee (#723) is set pre-construction with a non-constant function or state variable:
- _taxFee
MetaStarlink._previousLiquidityFee (#726) is set pre-construction with a non-constant function or state variable:
- _liquidityFee
Remove any initialization of state variables via non-constant state variables or function calls. If variables must be set upon contract deployment, locate initialization in the constructor instead.

Additional information: link

Low level call in Address.sendValue(address,uint256) (#310-316):
- (success) = recipient.call{value: amount}() (#314)
Low level call in Address._functionCallWithValue(address,bytes,uint256,string) (#376-397):
- (success,returndata) = target.call{value: weiValue}(data) (#380)
Avoid low-level calls. Check the call success. If the call is meant for a contract, check for code existence

Additional information: link

Function IUniswapV2Pair.DOMAIN_SEPARATOR() (#522) is not in mixedCase
Function IUniswapV2Pair.PERMIT_TYPEHASH() (#523) is not in mixedCase
Function IUniswapV2Pair.MINIMUM_LIQUIDITY() (#540) is not in mixedCase
Function IUniswapV2Router01.WETH() (#562) is not in mixedCase
Parameter MetaStarlink.setSwapAndLiquifyEnabled(bool)._enabled (#908) is not in mixedCase
Parameter MetaStarlink.calculateTaxFee(uint256)._amount (#967) is not in mixedCase
Parameter MetaStarlink.calculateLiquidityFee(uint256)._amount (#973) is not in mixedCase
Variable MetaStarlink._taxFee (#722) is not in mixedCase
Variable MetaStarlink._liquidityFee (#725) is not in mixedCase
Variable MetaStarlink._maxTxAmount (#734) is not in mixedCase
Follow the Solidity naming convention.

Additional information: link

Redundant expression "this (#256)" inContext (#250-259)
Remove redundant statements if they congest code but offer no value.

Additional information: link

renounceOwnership() should be declared external:
- Ownable.renounceOwnership() (#450-453)
transferOwnership(address) should be declared external:
- Ownable.transferOwnership(address) (#459-463)
geUnlockTime() should be declared external:
- Ownable.geUnlockTime() (#465-467)
lock(uint256) should be declared external:
- Ownable.lock(uint256) (#470-475)
unlock() should be declared external:
- Ownable.unlock() (#478-483)
name() should be declared external:
- MetaStarlink.name() (#769-771)
symbol() should be declared external:
- MetaStarlink.symbol() (#773-775)
decimals() should be declared external:
- MetaStarlink.decimals() (#777-779)
totalSupply() should be declared external:
- MetaStarlink.totalSupply() (#781-783)
transfer(address,uint256) should be declared external:
- MetaStarlink.transfer(address,uint256) (#790-793)
allowance(address,address) should be declared external:
- MetaStarlink.allowance(address,address) (#795-797)
approve(address,uint256) should be declared external:
- MetaStarlink.approve(address,uint256) (#799-802)
transferFrom(address,address,uint256) should be declared external:
- MetaStarlink.transferFrom(address,address,uint256) (#804-808)
increaseAllowance(address,uint256) should be declared external:
- MetaStarlink.increaseAllowance(address,uint256) (#810-813)
decreaseAllowance(address,uint256) should be declared external:
- MetaStarlink.decreaseAllowance(address,uint256) (#815-818)
isExcludedFromReward(address) should be declared external:
- MetaStarlink.isExcludedFromReward(address) (#820-822)
totalFees() should be declared external:
- MetaStarlink.totalFees() (#824-826)
deliver(uint256) should be declared external:
- MetaStarlink.deliver(uint256) (#828-835)
reflectionFromToken(uint256,bool) should be declared external:
- MetaStarlink.reflectionFromToken(uint256,bool) (#837-846)
excludeFromReward(address) should be declared external:
- MetaStarlink.excludeFromReward(address) (#854-861)
excludeFromFee(address) should be declared external:
- MetaStarlink.excludeFromFee(address) (#886-888)
includeInFee(address) should be declared external:
- MetaStarlink.includeInFee(address) (#890-892)
setSwapAndLiquifyEnabled(bool) should be declared external:
- MetaStarlink.setSwapAndLiquifyEnabled(bool) (#908-911)
isExcludedFromFee(address) should be declared external:
- MetaStarlink.isExcludedFromFee(address) (#994-996)
Use the external attribute for functions never called from the contract.

Additional information: link

Average 30d PancakeSwap liquidity is less than $100. Token is either dead or inactive.

Average 30d PancakeSwap volume is less than $100. Token is either dead or inactive.

Average 30d number of PancakeSwap swaps is less than 1. Token is either dead or inactive.

Number of Binance Smart Chain (BSC) token holders is less than 100. Token is either dead or inactive. Ignore for presale.

Average PancakeSwap trading volume, liqudity, number of swaps are extremely low. Token seems to be dead.

Token has no transactions for more than 100 days. It seems dead / abandoned.

Token is deployed only at one blockchain

Token has only one trading pair

Contract has 8% buy tax and 4% sell tax.
Taxes are low and contract ownership is renounced.

Unable to find website, listings and other project-related information

Token is marked as risky (blacklisted creator, fake name, dead project, etc.)

Additional information: link

Token has no active CoinGecko listing / rank

Token has no active CoinMarketCap listing / rank

Young tokens have high risks of price dump / death