Unable to find manual contract audit (e.g. Certik, PeckShield, Solidity...)
Reentrancy in Token._transfer(address,address,uint256) (#956-1002):
External calls:
- swapTokensForEthMarketing(marketingcontractTokenBalance) (#985)
- uniswapV2Router.swapExactTokensForETHSupportingFeeOnTransferTokens(tokenAmount,0,path,address(FundAddr),block.timestamp) (#1054-1060)
- swapAndLiquify(liquiditycontractTokenBalance) (#987)
- uniswapV2Router.addLiquidityETH{value: ethAmount}(address(this),tokenAmount,0,0,address(LiquidityAddr),block.timestamp) (#1069-1076)
- uniswapV2Router.swapExactTokensForETHSupportingFeeOnTransferTokens(tokenAmount,0,path,address(this),block.timestamp) (#1036-1042)
External calls sending eth:
- swapAndLiquify(liquiditycontractTokenBalance) (#987)
- uniswapV2Router.addLiquidityETH{value: ethAmount}(address(this),tokenAmount,0,0,address(LiquidityAddr),block.timestamp) (#1069-1076)
State variables written after the call(s):
- _tokenTransfer(from,to,amount,takeFee) (#1001)
- _FundFee = _previousFundFee (#941)
- _FundFee = 0 (#935)
- _tokenTransfer(from,to,amount,takeFee) (#1001)
- _liquidityFee = _previousLiquidityFee (#940)
- _liquidityFee = 0 (#934)
- _tokenTransfer(from,to,amount,takeFee) (#1001)
- _rOwned[address(this)] = _rOwned[address(this)].add(rLiquidity) (#909)
- _rOwned[sender] = _rOwned[sender].sub(rAmount) (#1102)
- _rOwned[sender] = _rOwned[sender].sub(rAmount) (#1111)
- _rOwned[sender] = _rOwned[sender].sub(rAmount) (#823)
- _rOwned[sender] = _rOwned[sender].sub(rAmount) (#1122)
- _rOwned[recipient] = _rOwned[recipient].add(rTransferAmount) (#1103)
- _rOwned[recipient] = _rOwned[recipient].add(rTransferAmount) (#1113)
- _rOwned[recipient] = _rOwned[recipient].add(rTransferAmount) (#1123)
- _rOwned[recipient] = _rOwned[recipient].add(rTransferAmount) (#825)
- _tokenTransfer(from,to,amount,takeFee) (#1001)
- _rTotal = _rTotal.sub(rFee) (#864)
- _tokenTransfer(from,to,amount,takeFee) (#1001)
- _tOwned[address(this)] = _tOwned[address(this)].add(tLiquidity) (#911)
- _tOwned[sender] = _tOwned[sender].sub(tAmount) (#1121)
- _tOwned[sender] = _tOwned[sender].sub(tAmount) (#822)
- _tOwned[recipient] = _tOwned[recipient].add(tTransferAmount) (#1112)
- _tOwned[recipient] = _tOwned[recipient].add(tTransferAmount) (#824)
- inSwapAndLiquify = false (#989)
Apply the check-effects-interactions pattern.
Additional information: link
Token.allowance(address,address).owner (#739) shadows:
- Ownable.owner() (#395-397) (function)
Token._approve(address,address,uint256).owner (#948) shadows:
- Ownable.owner() (#395-397) (function)
Rename the local variables that shadow another component.
Additional information: link
Token.setFundAddr(address).newaddr (#851) lacks a zero-check on :
- FundAddr = newaddr (#852)
Token.setLiquidityAddr(address).newaddr (#855) lacks a zero-check on :
- LiquidityAddr = newaddr (#856)
Check that the address is not zero.
Additional information: link
Token.setTaxFeePercent(uint256) (#839-841) should emit an event for:
- _taxFee = taxFee (#840)
Token.setLiquidityFeePercent(uint256) (#843-845) should emit an event for:
- _liquidityFee = liquidityFee (#844)
Token.setFundFeePercent(uint256) (#847-849) should emit an event for:
- _FundFee = FundFee (#848)
Emit an event for critical parameter changes.
Additional information: link
Token._transfer(address,address,uint256) (#956-1002) performs a multiplication on the result of a division:
-liquidityFee = _liquidityFee.mul(1000).div(sum) (#980)
-liquiditycontractTokenBalance = contractTokenBalance.mul(liquidityFee).div(1000) (#981)
Consider ordering multiplication before division.
Additional information: link
Token.addLiquidity(uint256,uint256) (#1064-1077) ignores return value by uniswapV2Router.addLiquidityETH{value: ethAmount}(address(this),tokenAmount,0,0,address(LiquidityAddr),block.timestamp) (#1069-1076)
Ensure that all the return values of the function calls are used.
Additional information: link
Reentrancy in Token._transfer(address,address,uint256) (#956-1002):
External calls:
- swapTokensForEthMarketing(marketingcontractTokenBalance) (#985)
- uniswapV2Router.swapExactTokensForETHSupportingFeeOnTransferTokens(tokenAmount,0,path,address(FundAddr),block.timestamp) (#1054-1060)
- swapAndLiquify(liquiditycontractTokenBalance) (#987)
- uniswapV2Router.addLiquidityETH{value: ethAmount}(address(this),tokenAmount,0,0,address(LiquidityAddr),block.timestamp) (#1069-1076)
- uniswapV2Router.swapExactTokensForETHSupportingFeeOnTransferTokens(tokenAmount,0,path,address(this),block.timestamp) (#1036-1042)
External calls sending eth:
- swapAndLiquify(liquiditycontractTokenBalance) (#987)
- uniswapV2Router.addLiquidityETH{value: ethAmount}(address(this),tokenAmount,0,0,address(LiquidityAddr),block.timestamp) (#1069-1076)
State variables written after the call(s):
- swapAndLiquify(liquiditycontractTokenBalance) (#987)
- _allowances[owner][spender] = amount (#952)
- _tokenTransfer(from,to,amount,takeFee) (#1001)
- _previousFundFee = _FundFee (#931)
- _tokenTransfer(from,to,amount,takeFee) (#1001)
- _previousLiquidityFee = _liquidityFee (#930)
- _tokenTransfer(from,to,amount,takeFee) (#1001)
- _previousTaxFee = _taxFee (#929)
- _tokenTransfer(from,to,amount,takeFee) (#1001)
- _tFeeTotal = _tFeeTotal.add(tFee) (#865)
- _tokenTransfer(from,to,amount,takeFee) (#1001)
- _taxFee = _previousTaxFee (#939)
- _taxFee = 0 (#933)
Reentrancy in Token.constructor() (#692-711):
External calls:
- uniswapV2Pair = IUniswapV2Factory(_uniswapV2Router.factory()).createPair(address(this),_uniswapV2Router.WETH()) (#700-701)
State variables written after the call(s):
- _isExcludedFromFee[owner()] = true (#707)
- _isExcludedFromFee[address(this)] = true (#708)
- uniswapV2Router = _uniswapV2Router (#704)
Reentrancy in Token.swapAndLiquify(uint256) (#1004-1025):
External calls:
- swapTokensForEth(half) (#1016)
- uniswapV2Router.swapExactTokensForETHSupportingFeeOnTransferTokens(tokenAmount,0,path,address(this),block.timestamp) (#1036-1042)
- addLiquidity(otherHalf,newBalance) (#1022)
- uniswapV2Router.addLiquidityETH{value: ethAmount}(address(this),tokenAmount,0,0,address(LiquidityAddr),block.timestamp) (#1069-1076)
External calls sending eth:
- addLiquidity(otherHalf,newBalance) (#1022)
- uniswapV2Router.addLiquidityETH{value: ethAmount}(address(this),tokenAmount,0,0,address(LiquidityAddr),block.timestamp) (#1069-1076)
State variables written after the call(s):
- addLiquidity(otherHalf,newBalance) (#1022)
- _allowances[owner][spender] = amount (#952)
Reentrancy in Token.transferFrom(address,address,uint256) (#748-752):
External calls:
- _transfer(sender,recipient,amount) (#749)
- uniswapV2Router.addLiquidityETH{value: ethAmount}(address(this),tokenAmount,0,0,address(LiquidityAddr),block.timestamp) (#1069-1076)
- uniswapV2Router.swapExactTokensForETHSupportingFeeOnTransferTokens(tokenAmount,0,path,address(FundAddr),block.timestamp) (#1054-1060)
- uniswapV2Router.swapExactTokensForETHSupportingFeeOnTransferTokens(tokenAmount,0,path,address(this),block.timestamp) (#1036-1042)
External calls sending eth:
- _transfer(sender,recipient,amount) (#749)
- uniswapV2Router.addLiquidityETH{value: ethAmount}(address(this),tokenAmount,0,0,address(LiquidityAddr),block.timestamp) (#1069-1076)
State variables written after the call(s):
- _approve(sender,_msgSender(),_allowances[sender][_msgSender()].sub(amount,ERC20: transfer amount exceeds allowance)) (#750)
- _allowances[owner][spender] = amount (#952)
Apply the check-effects-interactions pattern.
Additional information: link
Reentrancy in Token._transfer(address,address,uint256) (#956-1002):
External calls:
- swapTokensForEthMarketing(marketingcontractTokenBalance) (#985)
- uniswapV2Router.swapExactTokensForETHSupportingFeeOnTransferTokens(tokenAmount,0,path,address(FundAddr),block.timestamp) (#1054-1060)
- swapAndLiquify(liquiditycontractTokenBalance) (#987)
- uniswapV2Router.addLiquidityETH{value: ethAmount}(address(this),tokenAmount,0,0,address(LiquidityAddr),block.timestamp) (#1069-1076)
- uniswapV2Router.swapExactTokensForETHSupportingFeeOnTransferTokens(tokenAmount,0,path,address(this),block.timestamp) (#1036-1042)
External calls sending eth:
- swapAndLiquify(liquiditycontractTokenBalance) (#987)
- uniswapV2Router.addLiquidityETH{value: ethAmount}(address(this),tokenAmount,0,0,address(LiquidityAddr),block.timestamp) (#1069-1076)
Event emitted after the call(s):
- Approval(owner,spender,amount) (#953)
- swapAndLiquify(liquiditycontractTokenBalance) (#987)
- SwapAndLiquify(half,newBalance,otherHalf) (#1024)
- swapAndLiquify(liquiditycontractTokenBalance) (#987)
- Transfer(sender,recipient,tTransferAmount) (#1106)
- _tokenTransfer(from,to,amount,takeFee) (#1001)
- Transfer(sender,recipient,tTransferAmount) (#1126)
- _tokenTransfer(from,to,amount,takeFee) (#1001)
- Transfer(sender,recipient,tTransferAmount) (#1116)
- _tokenTransfer(from,to,amount,takeFee) (#1001)
- Transfer(sender,recipient,tTransferAmount) (#828)
- _tokenTransfer(from,to,amount,takeFee) (#1001)
Reentrancy in Token.constructor() (#692-711):
External calls:
- uniswapV2Pair = IUniswapV2Factory(_uniswapV2Router.factory()).createPair(address(this),_uniswapV2Router.WETH()) (#700-701)
Event emitted after the call(s):
- Transfer(address(0),_msgSender(),_tTotal) (#710)
Reentrancy in Token.swapAndLiquify(uint256) (#1004-1025):
External calls:
- swapTokensForEth(half) (#1016)
- uniswapV2Router.swapExactTokensForETHSupportingFeeOnTransferTokens(tokenAmount,0,path,address(this),block.timestamp) (#1036-1042)
- addLiquidity(otherHalf,newBalance) (#1022)
- uniswapV2Router.addLiquidityETH{value: ethAmount}(address(this),tokenAmount,0,0,address(LiquidityAddr),block.timestamp) (#1069-1076)
External calls sending eth:
- addLiquidity(otherHalf,newBalance) (#1022)
- uniswapV2Router.addLiquidityETH{value: ethAmount}(address(this),tokenAmount,0,0,address(LiquidityAddr),block.timestamp) (#1069-1076)
Event emitted after the call(s):
- Approval(owner,spender,amount) (#953)
- addLiquidity(otherHalf,newBalance) (#1022)
- SwapAndLiquify(half,newBalance,otherHalf) (#1024)
Reentrancy in Token.transferFrom(address,address,uint256) (#748-752):
External calls:
- _transfer(sender,recipient,amount) (#749)
- uniswapV2Router.addLiquidityETH{value: ethAmount}(address(this),tokenAmount,0,0,address(LiquidityAddr),block.timestamp) (#1069-1076)
- uniswapV2Router.swapExactTokensForETHSupportingFeeOnTransferTokens(tokenAmount,0,path,address(FundAddr),block.timestamp) (#1054-1060)
- uniswapV2Router.swapExactTokensForETHSupportingFeeOnTransferTokens(tokenAmount,0,path,address(this),block.timestamp) (#1036-1042)
External calls sending eth:
- _transfer(sender,recipient,amount) (#749)
- uniswapV2Router.addLiquidityETH{value: ethAmount}(address(this),tokenAmount,0,0,address(LiquidityAddr),block.timestamp) (#1069-1076)
Event emitted after the call(s):
- Approval(owner,spender,amount) (#953)
- _approve(sender,_msgSender(),_allowances[sender][_msgSender()].sub(amount,ERC20: transfer amount exceeds allowance)) (#750)
Apply the check-effects-interactions pattern.
Additional information: link
Address.isContract(address) (#257-266) uses assembly
- INLINE ASM (#264)
Address._functionCallWithValue(address,bytes,uint256,string) (#350-371) uses assembly
- INLINE ASM (#363-366)
Do not use evm assembly.
Additional information: link
Token.includeInReward(address) (#808-819) has costly operations inside a loop:
- _excluded.pop() (#815)
Use a local variable to hold the loop computation result.
Additional information: link
Address._functionCallWithValue(address,bytes,uint256,string) (#350-371) is never used and should be removed
Address.functionCall(address,bytes) (#310-312) is never used and should be removed
Address.functionCall(address,bytes,string) (#320-322) is never used and should be removed
Address.functionCallWithValue(address,bytes,uint256) (#335-337) is never used and should be removed
Address.functionCallWithValue(address,bytes,uint256,string) (#345-348) is never used and should be removed
Address.isContract(address) (#257-266) is never used and should be removed
Address.sendValue(address,uint256) (#284-290) is never used and should be removed
Context._msgData() (#230-233) is never used and should be removed
SafeMath.mod(uint256,uint256) (#203-205) is never used and should be removed
SafeMath.mod(uint256,uint256,string) (#219-222) is never used and should be removed
Remove unused functions.
Additional information: link
Token._rTotal (#656) is set pre-construction with a non-constant function or state variable:
- (MAX - (MAX % _tTotal))
Token._previousTaxFee (#664) is set pre-construction with a non-constant function or state variable:
- _taxFee
Token._previousLiquidityFee (#667) is set pre-construction with a non-constant function or state variable:
- _liquidityFee
Token._previousFundFee (#670) is set pre-construction with a non-constant function or state variable:
- _FundFee
Token._taxFeeTotal (#672) is set pre-construction with a non-constant function or state variable:
- (_taxFee + _liquidityFee + _FundFee)
Remove any initialization of state variables via non-constant state variables or function calls. If variables must be set upon contract deployment, locate initialization in the constructor instead.
Additional information: link
Pragma version>=0.6.0<0.9.0 (#10) is too complex
Deploy with any of the following Solidity versions: 0.5.16 - 0.5.17, 0.6.11 - 0.6.12, 0.7.5 - 0.7.6 Use a simple pragma version that allows any of these versions. Consider using the latest version of Solidity for testing.
Additional information: link
Low level call in Address.sendValue(address,uint256) (#284-290):
- (success) = recipient.call{value: amount}() (#288)
Low level call in Address._functionCallWithValue(address,bytes,uint256,string) (#350-371):
- (success,returndata) = target.call{value: weiValue}(data) (#354)
Avoid low-level calls. Check the call success. If the call is meant for a contract, check for code existence
Additional information: link
Variable Ownable._owner (#387) is not in mixedCase
Function IUniswapV2Pair.DOMAIN_SEPARATOR() (#465) is not in mixedCase
Function IUniswapV2Pair.PERMIT_TYPEHASH() (#466) is not in mixedCase
Function IUniswapV2Pair.MINIMUM_LIQUIDITY() (#483) is not in mixedCase
Function IUniswapV2Router01.WETH() (#504) is not in mixedCase
Parameter Token.setFundFeePercent(uint256).FundFee (#847) is not in mixedCase
Parameter Token.calculateTaxFee(uint256)._amount (#914) is not in mixedCase
Parameter Token.calculateLiquidityFee(uint256)._amount (#920) is not in mixedCase
Variable Token._FundFee (#669) is not in mixedCase
Variable Token._taxFeeTotal (#672) is not in mixedCase
Variable Token.FundAddr (#677) is not in mixedCase
Variable Token.LiquidityAddr (#678) is not in mixedCase
Follow the Solidity naming convention.
Additional information: link
Redundant expression "this (#231)" inContext (#225-234)
Remove redundant statements if they congest code but offer no value.
Additional information: link
Variable IUniswapV2Router01.addLiquidity(address,address,uint256,uint256,uint256,uint256,address,uint256).amountADesired (#509) is too similar to IUniswapV2Router01.addLiquidity(address,address,uint256,uint256,uint256,uint256,address,uint256).amountBDesired (#510)
Variable Token._transferStandard(address,address,uint256).rTransferAmount (#1101) is too similar to Token._getValues(uint256).tTransferAmount (#869)
Variable Token.reflectionFromToken(uint256,bool).rTransferAmount (#787) is too similar to Token._transferToExcluded(address,address,uint256).tTransferAmount (#1110)
Variable Token._transferToExcluded(address,address,uint256).rTransferAmount (#1110) is too similar to Token._transferToExcluded(address,address,uint256).tTransferAmount (#1110)
Variable Token.reflectionFromToken(uint256,bool).rTransferAmount (#787) is too similar to Token._getTValues(uint256).tTransferAmount (#877)
Variable Token.reflectionFromToken(uint256,bool).rTransferAmount (#787) is too similar to Token._transferFromExcluded(address,address,uint256).tTransferAmount (#1120)
Variable Token._transferBothExcluded(address,address,uint256).rTransferAmount (#821) is too similar to Token._transferToExcluded(address,address,uint256).tTransferAmount (#1110)
Variable Token._transferToExcluded(address,address,uint256).rTransferAmount (#1110) is too similar to Token._getTValues(uint256).tTransferAmount (#877)
Variable Token.reflectionFromToken(uint256,bool).rTransferAmount (#787) is too similar to Token._transferBothExcluded(address,address,uint256).tTransferAmount (#821)
Variable Token._transferBothExcluded(address,address,uint256).rTransferAmount (#821) is too similar to Token._getTValues(uint256).tTransferAmount (#877)
Variable Token._getRValues(uint256,uint256,uint256,uint256).rTransferAmount (#885) is too similar to Token._transferToExcluded(address,address,uint256).tTransferAmount (#1110)
Variable Token._transferFromExcluded(address,address,uint256).rTransferAmount (#1120) is too similar to Token._transferToExcluded(address,address,uint256).tTransferAmount (#1110)
Variable Token._getRValues(uint256,uint256,uint256,uint256).rTransferAmount (#885) is too similar to Token._getTValues(uint256).tTransferAmount (#877)
Variable Token._transferBothExcluded(address,address,uint256).rTransferAmount (#821) is too similar to Token._transferFromExcluded(address,address,uint256).tTransferAmount (#1120)
Variable Token._transferStandard(address,address,uint256).rTransferAmount (#1101) is too similar to Token._transferToExcluded(address,address,uint256).tTransferAmount (#1110)
Variable Token._transferFromExcluded(address,address,uint256).rTransferAmount (#1120) is too similar to Token._getTValues(uint256).tTransferAmount (#877)
Variable Token._transferBothExcluded(address,address,uint256).rTransferAmount (#821) is too similar to Token._transferBothExcluded(address,address,uint256).tTransferAmount (#821)
Variable Token.reflectionFromToken(uint256,bool).rTransferAmount (#787) is too similar to Token._transferStandard(address,address,uint256).tTransferAmount (#1101)
Variable Token._getRValues(uint256,uint256,uint256,uint256).rTransferAmount (#885) is too similar to Token._transferFromExcluded(address,address,uint256).tTransferAmount (#1120)
Variable Token._transferStandard(address,address,uint256).rTransferAmount (#1101) is too similar to Token._getTValues(uint256).tTransferAmount (#877)
Variable Token._transferFromExcluded(address,address,uint256).rTransferAmount (#1120) is too similar to Token._transferFromExcluded(address,address,uint256).tTransferAmount (#1120)
Variable Token._transferBothExcluded(address,address,uint256).rTransferAmount (#821) is too similar to Token._transferStandard(address,address,uint256).tTransferAmount (#1101)
Variable Token._transferStandard(address,address,uint256).rTransferAmount (#1101) is too similar to Token._transferFromExcluded(address,address,uint256).tTransferAmount (#1120)
Variable Token._transferStandard(address,address,uint256).rTransferAmount (#1101) is too similar to Token._transferBothExcluded(address,address,uint256).tTransferAmount (#821)
Variable Token.reflectionFromToken(uint256,bool).rTransferAmount (#787) is too similar to Token._getValues(uint256).tTransferAmount (#869)
Variable Token._getValues(uint256).rTransferAmount (#870) is too similar to Token._transferToExcluded(address,address,uint256).tTransferAmount (#1110)
Variable Token._transferStandard(address,address,uint256).rTransferAmount (#1101) is too similar to Token._transferStandard(address,address,uint256).tTransferAmount (#1101)
Variable Token._transferBothExcluded(address,address,uint256).rTransferAmount (#821) is too similar to Token._getValues(uint256).tTransferAmount (#869)
Variable Token._getValues(uint256).rTransferAmount (#870) is too similar to Token._getTValues(uint256).tTransferAmount (#877)
Variable Token._getRValues(uint256,uint256,uint256,uint256).rTransferAmount (#885) is too similar to Token._getValues(uint256).tTransferAmount (#869)
Variable Token._transferFromExcluded(address,address,uint256).rTransferAmount (#1120) is too similar to Token._getValues(uint256).tTransferAmount (#869)
Variable Token._getValues(uint256).rTransferAmount (#870) is too similar to Token._getValues(uint256).tTransferAmount (#869)
Variable Token._transferToExcluded(address,address,uint256).rTransferAmount (#1110) is too similar to Token._transferBothExcluded(address,address,uint256).tTransferAmount (#821)
Variable Token._transferFromExcluded(address,address,uint256).rTransferAmount (#1120) is too similar to Token._transferBothExcluded(address,address,uint256).tTransferAmount (#821)
Variable Token._getValues(uint256).rTransferAmount (#870) is too similar to Token._transferBothExcluded(address,address,uint256).tTransferAmount (#821)
Variable Token._transferToExcluded(address,address,uint256).rTransferAmount (#1110) is too similar to Token._transferStandard(address,address,uint256).tTransferAmount (#1101)
Variable Token._transferToExcluded(address,address,uint256).rTransferAmount (#1110) is too similar to Token._transferFromExcluded(address,address,uint256).tTransferAmount (#1120)
Variable Token._getValues(uint256).rTransferAmount (#870) is too similar to Token._transferFromExcluded(address,address,uint256).tTransferAmount (#1120)
Variable Token._transferFromExcluded(address,address,uint256).rTransferAmount (#1120) is too similar to Token._transferStandard(address,address,uint256).tTransferAmount (#1101)
Variable Token._getValues(uint256).rTransferAmount (#870) is too similar to Token._transferStandard(address,address,uint256).tTransferAmount (#1101)
Variable Token._getRValues(uint256,uint256,uint256,uint256).rTransferAmount (#885) is too similar to Token._transferBothExcluded(address,address,uint256).tTransferAmount (#821)
Variable Token._transferToExcluded(address,address,uint256).rTransferAmount (#1110) is too similar to Token._getValues(uint256).tTransferAmount (#869)
Variable Token._getRValues(uint256,uint256,uint256,uint256).rTransferAmount (#885) is too similar to Token._transferStandard(address,address,uint256).tTransferAmount (#1101)
Prevent variables from having similar names.
Additional information: link
Token.slitherConstructorVariables() (#641-1132) uses literals with too many digits:
- _tTotal = 100000000000 * 10 ** 9 (#655)
Token.slitherConstructorVariables() (#641-1132) uses literals with too many digits:
- numTokensSellToAddToLiquidity = 100000000 * 10 ** 9 (#682)
Use: Ether suffix, Time suffix, or The scientific notation
Additional information: link
Token._decimals (#661) should be constant
Token._name (#659) should be constant
Token._symbol (#660) should be constant
Token._tTotal (#655) should be constant
Token.numTokensSellToAddToLiquidity (#682) should be constant
Add the constant attributes to state variables that never change.
Additional information: link
renounceOwnership() should be declared external:
- Ownable.renounceOwnership() (#414-417)
transferOwnership(address) should be declared external:
- Ownable.transferOwnership(address) (#423-427)
name() should be declared external:
- Token.name() (#713-715)
symbol() should be declared external:
- Token.symbol() (#717-719)
decimals() should be declared external:
- Token.decimals() (#721-723)
totalSupply() should be declared external:
- Token.totalSupply() (#725-727)
transfer(address,uint256) should be declared external:
- Token.transfer(address,uint256) (#734-737)
allowance(address,address) should be declared external:
- Token.allowance(address,address) (#739-741)
approve(address,uint256) should be declared external:
- Token.approve(address,uint256) (#743-746)
transferFrom(address,address,uint256) should be declared external:
- Token.transferFrom(address,address,uint256) (#748-752)
increaseAllowance(address,uint256) should be declared external:
- Token.increaseAllowance(address,uint256) (#754-757)
decreaseAllowance(address,uint256) should be declared external:
- Token.decreaseAllowance(address,uint256) (#759-762)
isExcludedFromReward(address) should be declared external:
- Token.isExcludedFromReward(address) (#764-766)
totalFees() should be declared external:
- Token.totalFees() (#768-770)
deliver(uint256) should be declared external:
- Token.deliver(uint256) (#772-779)
reflectionFromToken(uint256,bool) should be declared external:
- Token.reflectionFromToken(uint256,bool) (#781-790)
excludeFromReward(address) should be declared external:
- Token.excludeFromReward(address) (#798-806)
excludeFromFee(address) should be declared external:
- Token.excludeFromFee(address) (#831-833)
includeInFee(address) should be declared external:
- Token.includeInFee(address) (#835-837)
isExcludedFromFee(address) should be declared external:
- Token.isExcludedFromFee(address) (#944-946)
Use the external attribute for functions never called from the contract.
Additional information: link
Unable to find website, listings and other project-related information
Young tokens have high risks of scam / price dump / death
Token has no active CoinGecko listing / rank
Token has no active CoinMarketCap listing / rank
Unable to find Telegram and Twitter accounts