Kaiken Shiba Token Logo

KSHIB [Kaiken Shiba] Token

About KSHIB

Listings

Token 11 months
CoinMarketCap 10 months
white paper

Kaiken Shiba is an interesting meme whose serious mission is to rescue dogs in need, bringing the adoption of cryptocurrency into the mainstream through new concepts such as bounty, NFTS, decentralized exchange and credit cards on our website.

Social

Laser Scorebeta Last Audit: 22 December 2021

report
Token seems to be (relatively) fine. It still become a scam, but probability is moderate.

Reentrancy in KaikenShiba._transfer(address,address,uint256) (#988-1032):
External calls:
- swapAndLiquify(contractTokenBalance) (#1019)
- uniswapV2Router.addLiquidityETH{value: ethAmount}(address(this),tokenAmount,0,0,address(0x0000000000000000000000000000000000000000),block.timestamp) (#1080-1087)
- uniswapV2Router.swapExactTokensForETHSupportingFeeOnTransferTokens(tokenAmount,0,path,address(this),block.timestamp) (#1066-1072)
External calls sending eth:
- swapAndLiquify(contractTokenBalance) (#1019)
- uniswapV2Router.addLiquidityETH{value: ethAmount}(address(this),tokenAmount,0,0,address(0x0000000000000000000000000000000000000000),block.timestamp) (#1080-1087)
State variables written after the call(s):
- _tokenTransfer(from,to,amount,takeFee) (#1031)
- _rOwned[address(this)] = _rOwned[address(this)].add(rLiquidity) (#944)
- _rOwned[sender] = _rOwned[sender].sub(rAmount) (#1113)
- _rOwned[sender] = _rOwned[sender].sub(rAmount) (#1122)
- _rOwned[sender] = _rOwned[sender].sub(rAmount) (#860)
- _rOwned[sender] = _rOwned[sender].sub(rAmount) (#1133)
- _rOwned[recipient] = _rOwned[recipient].add(rTransferAmount) (#1114)
- _rOwned[recipient] = _rOwned[recipient].add(rTransferAmount) (#1124)
- _rOwned[recipient] = _rOwned[recipient].add(rTransferAmount) (#1134)
- _rOwned[recipient] = _rOwned[recipient].add(rTransferAmount) (#862)
- _tokenTransfer(from,to,amount,takeFee) (#1031)
- _rTotal = _rTotal.sub(rFee) (#899)
- _tokenTransfer(from,to,amount,takeFee) (#1031)
- _tOwned[address(this)] = _tOwned[address(this)].add(tLiquidity) (#946)
- _tOwned[sender] = _tOwned[sender].sub(tAmount) (#859)
- _tOwned[sender] = _tOwned[sender].sub(tAmount) (#1132)
- _tOwned[recipient] = _tOwned[recipient].add(tTransferAmount) (#1123)
- _tOwned[recipient] = _tOwned[recipient].add(tTransferAmount) (#861)
Apply the check-effects-interactions pattern.

Additional information: link


Unable to verify that contract auditor is trusted: Certik, Quantstamp, Hacken, Solidity, Paladinsec, Openzeppelin, Verichains

KaikenShiba.includeInReward(address) (#845-856) has costly operations inside a loop:
- _excluded.pop() (#852)
Use a local variable to hold the loop computation result.

Additional information: link

KaikenShiba.addLiquidity(uint256,uint256) (#1075-1088) ignores return value by uniswapV2Router.addLiquidityETH{value: ethAmount}(address(this),tokenAmount,0,0,address(0x0000000000000000000000000000000000000000),block.timestamp) (#1080-1087)
Ensure that all the return values of the function calls are used.

Additional information: link

KaikenShiba.allowance(address,address).owner (#776) shadows:
- Ownable.owner() (#412-414) (function)
KaikenShiba._approve(address,address,uint256).owner (#980) shadows:
- Ownable.owner() (#412-414) (function)
Rename the local variables that shadow another component.

Additional information: link

KaikenShiba.setTaxFeePercent(uint256) (#876-878) should emit an event for:
- _taxFee = taxFee (#877)
KaikenShiba.setLiquidityFeePercent(uint256) (#880-882) should emit an event for:
- _liquidityFee = liquidityFee (#881)
KaikenShiba.setMaxTxPercent(uint256) (#884-888) should emit an event for:
- _maxTxAmount = _tTotal.mul(maxTxPercent).div(10 ** 2) (#885-887)
Emit an event for critical parameter changes.

Additional information: link

Reentrancy in KaikenShiba._transfer(address,address,uint256) (#988-1032):
External calls:
- swapAndLiquify(contractTokenBalance) (#1019)
- uniswapV2Router.addLiquidityETH{value: ethAmount}(address(this),tokenAmount,0,0,address(0x0000000000000000000000000000000000000000),block.timestamp) (#1080-1087)
- uniswapV2Router.swapExactTokensForETHSupportingFeeOnTransferTokens(tokenAmount,0,path,address(this),block.timestamp) (#1066-1072)
External calls sending eth:
- swapAndLiquify(contractTokenBalance) (#1019)
- uniswapV2Router.addLiquidityETH{value: ethAmount}(address(this),tokenAmount,0,0,address(0x0000000000000000000000000000000000000000),block.timestamp) (#1080-1087)
State variables written after the call(s):
- _tokenTransfer(from,to,amount,takeFee) (#1031)
- _liquidityFee = _previousLiquidityFee (#973)
- _liquidityFee = 0 (#968)
- _tokenTransfer(from,to,amount,takeFee) (#1031)
- _previousLiquidityFee = _liquidityFee (#965)
- _tokenTransfer(from,to,amount,takeFee) (#1031)
- _previousTaxFee = _taxFee (#964)
- _tokenTransfer(from,to,amount,takeFee) (#1031)
- _tFeeTotal = _tFeeTotal.add(tFee) (#900)
- _tokenTransfer(from,to,amount,takeFee) (#1031)
- _taxFee = _previousTaxFee (#972)
- _taxFee = 0 (#967)
Reentrancy in KaikenShiba.constructor() (#732-748):
External calls:
- uniswapV2Pair = IUniswapV2Factory(_uniswapV2Router.factory()).createPair(address(this),_uniswapV2Router.WETH()) (#737-738)
State variables written after the call(s):
- _isExcludedFromFee[owner()] = true (#744)
- _isExcludedFromFee[address(this)] = true (#745)
- uniswapV2Router = _uniswapV2Router (#741)
Reentrancy in KaikenShiba.swapAndLiquify(uint256) (#1034-1055):
External calls:
- swapTokensForEth(half) (#1046)
- uniswapV2Router.swapExactTokensForETHSupportingFeeOnTransferTokens(tokenAmount,0,path,address(this),block.timestamp) (#1066-1072)
- addLiquidity(otherHalf,newBalance) (#1052)
- uniswapV2Router.addLiquidityETH{value: ethAmount}(address(this),tokenAmount,0,0,address(0x0000000000000000000000000000000000000000),block.timestamp) (#1080-1087)
External calls sending eth:
- addLiquidity(otherHalf,newBalance) (#1052)
- uniswapV2Router.addLiquidityETH{value: ethAmount}(address(this),tokenAmount,0,0,address(0x0000000000000000000000000000000000000000),block.timestamp) (#1080-1087)
State variables written after the call(s):
- addLiquidity(otherHalf,newBalance) (#1052)
- _allowances[owner][spender] = amount (#984)
Reentrancy in KaikenShiba.transferFrom(address,address,uint256) (#785-789):
External calls:
- _transfer(sender,recipient,amount) (#786)
- uniswapV2Router.addLiquidityETH{value: ethAmount}(address(this),tokenAmount,0,0,address(0x0000000000000000000000000000000000000000),block.timestamp) (#1080-1087)
- uniswapV2Router.swapExactTokensForETHSupportingFeeOnTransferTokens(tokenAmount,0,path,address(this),block.timestamp) (#1066-1072)
External calls sending eth:
- _transfer(sender,recipient,amount) (#786)
- uniswapV2Router.addLiquidityETH{value: ethAmount}(address(this),tokenAmount,0,0,address(0x0000000000000000000000000000000000000000),block.timestamp) (#1080-1087)
State variables written after the call(s):
- _approve(sender,_msgSender(),_allowances[sender][_msgSender()].sub(amount,ERC20: transfer amount exceeds allowance)) (#787)
- _allowances[owner][spender] = amount (#984)
Apply the check-effects-interactions pattern.

Additional information: link

Reentrancy in KaikenShiba._transfer(address,address,uint256) (#988-1032):
External calls:
- swapAndLiquify(contractTokenBalance) (#1019)
- uniswapV2Router.addLiquidityETH{value: ethAmount}(address(this),tokenAmount,0,0,address(0x0000000000000000000000000000000000000000),block.timestamp) (#1080-1087)
- uniswapV2Router.swapExactTokensForETHSupportingFeeOnTransferTokens(tokenAmount,0,path,address(this),block.timestamp) (#1066-1072)
External calls sending eth:
- swapAndLiquify(contractTokenBalance) (#1019)
- uniswapV2Router.addLiquidityETH{value: ethAmount}(address(this),tokenAmount,0,0,address(0x0000000000000000000000000000000000000000),block.timestamp) (#1080-1087)
Event emitted after the call(s):
- Transfer(sender,recipient,tTransferAmount) (#1117)
- _tokenTransfer(from,to,amount,takeFee) (#1031)
- Transfer(sender,recipient,tTransferAmount) (#1127)
- _tokenTransfer(from,to,amount,takeFee) (#1031)
- Transfer(sender,recipient,tTransferAmount) (#1137)
- _tokenTransfer(from,to,amount,takeFee) (#1031)
- Transfer(sender,recipient,tTransferAmount) (#865)
- _tokenTransfer(from,to,amount,takeFee) (#1031)
Reentrancy in KaikenShiba.constructor() (#732-748):
External calls:
- uniswapV2Pair = IUniswapV2Factory(_uniswapV2Router.factory()).createPair(address(this),_uniswapV2Router.WETH()) (#737-738)
Event emitted after the call(s):
- Transfer(address(0),_msgSender(),_tTotal) (#747)
Reentrancy in KaikenShiba.swapAndLiquify(uint256) (#1034-1055):
External calls:
- swapTokensForEth(half) (#1046)
- uniswapV2Router.swapExactTokensForETHSupportingFeeOnTransferTokens(tokenAmount,0,path,address(this),block.timestamp) (#1066-1072)
- addLiquidity(otherHalf,newBalance) (#1052)
- uniswapV2Router.addLiquidityETH{value: ethAmount}(address(this),tokenAmount,0,0,address(0x0000000000000000000000000000000000000000),block.timestamp) (#1080-1087)
External calls sending eth:
- addLiquidity(otherHalf,newBalance) (#1052)
- uniswapV2Router.addLiquidityETH{value: ethAmount}(address(this),tokenAmount,0,0,address(0x0000000000000000000000000000000000000000),block.timestamp) (#1080-1087)
Event emitted after the call(s):
- Approval(owner,spender,amount) (#985)
- addLiquidity(otherHalf,newBalance) (#1052)
- SwapAndLiquify(half,newBalance,otherHalf) (#1054)
Reentrancy in KaikenShiba.transferFrom(address,address,uint256) (#785-789):
External calls:
- _transfer(sender,recipient,amount) (#786)
- uniswapV2Router.addLiquidityETH{value: ethAmount}(address(this),tokenAmount,0,0,address(0x0000000000000000000000000000000000000000),block.timestamp) (#1080-1087)
- uniswapV2Router.swapExactTokensForETHSupportingFeeOnTransferTokens(tokenAmount,0,path,address(this),block.timestamp) (#1066-1072)
External calls sending eth:
- _transfer(sender,recipient,amount) (#786)
- uniswapV2Router.addLiquidityETH{value: ethAmount}(address(this),tokenAmount,0,0,address(0x0000000000000000000000000000000000000000),block.timestamp) (#1080-1087)
Event emitted after the call(s):
- Approval(owner,spender,amount) (#985)
- _approve(sender,_msgSender(),_allowances[sender][_msgSender()].sub(amount,ERC20: transfer amount exceeds allowance)) (#787)
Apply the check-effects-interactions pattern.

Additional information: link

Ownable.unlock() (#459-464) uses timestamp for comparisons
Dangerous comparisons:
- require(bool,string)(now > _lockTime,Contract is locked until 7 days) (#461)
Avoid relying on block.timestamp.

Additional information: link

Address.isContract(address) (#264-273) uses assembly
- INLINE ASM (#271)
Address._functionCallWithValue(address,bytes,uint256,string) (#357-378) uses assembly
- INLINE ASM (#370-373)
Do not use evm assembly.

Additional information: link

Address._functionCallWithValue(address,bytes,uint256,string) (#357-378) is never used and should be removed
Address.functionCall(address,bytes) (#317-319) is never used and should be removed
Address.functionCall(address,bytes,string) (#327-329) is never used and should be removed
Address.functionCallWithValue(address,bytes,uint256) (#342-344) is never used and should be removed
Address.functionCallWithValue(address,bytes,uint256,string) (#352-355) is never used and should be removed
Address.isContract(address) (#264-273) is never used and should be removed
Address.sendValue(address,uint256) (#291-297) is never used and should be removed
Context._msgData() (#236-239) is never used and should be removed
SafeMath.mod(uint256,uint256) (#209-211) is never used and should be removed
SafeMath.mod(uint256,uint256,string) (#225-228) is never used and should be removed
Remove unused functions.

Additional information: link

KaikenShiba._rTotal (#696) is set pre-construction with a non-constant function or state variable:
- (MAX - (MAX % _tTotal))
KaikenShiba._previousTaxFee (#704) is set pre-construction with a non-constant function or state variable:
- _taxFee
KaikenShiba._previousLiquidityFee (#707) is set pre-construction with a non-constant function or state variable:
- _liquidityFee
Remove any initialization of state variables via non-constant state variables or function calls. If variables must be set upon contract deployment, locate initialization in the constructor instead.

Additional information: link

Low level call in Address.sendValue(address,uint256) (#291-297):
- (success) = recipient.call{value: amount}() (#295)
Low level call in Address._functionCallWithValue(address,bytes,uint256,string) (#357-378):
- (success,returndata) = target.call{value: weiValue}(data) (#361)
Avoid low-level calls. Check the call success. If the call is meant for a contract, check for code existence

Additional information: link

Function IUniswapV2Pair.DOMAIN_SEPARATOR() (#503) is not in mixedCase
Function IUniswapV2Pair.PERMIT_TYPEHASH() (#504) is not in mixedCase
Function IUniswapV2Pair.MINIMUM_LIQUIDITY() (#521) is not in mixedCase
Function IUniswapV2Router01.WETH() (#543) is not in mixedCase
Parameter KaikenShiba.setSwapAndLiquifyEnabled(bool)._enabled (#890) is not in mixedCase
Parameter KaikenShiba.calculateTaxFee(uint256)._amount (#949) is not in mixedCase
Parameter KaikenShiba.calculateLiquidityFee(uint256)._amount (#955) is not in mixedCase
Variable KaikenShiba._taxFee (#703) is not in mixedCase
Variable KaikenShiba._liquidityFee (#706) is not in mixedCase
Variable KaikenShiba._maxTxAmount (#715) is not in mixedCase
Follow the Solidity naming convention.

Additional information: link

Redundant expression "this (#237)" inContext (#231-240)
Remove redundant statements if they congest code but offer no value.

Additional information: link

Variable IUniswapV2Router01.addLiquidity(address,address,uint256,uint256,uint256,uint256,address,uint256).amountADesired (#548) is too similar to IUniswapV2Router01.addLiquidity(address,address,uint256,uint256,uint256,uint256,address,uint256).amountBDesired (#549)
Variable KaikenShiba._getValues(uint256).rTransferAmount (#905) is too similar to KaikenShiba._transferBothExcluded(address,address,uint256).tTransferAmount (#858)
Variable KaikenShiba._getRValues(uint256,uint256,uint256,uint256).rTransferAmount (#920) is too similar to KaikenShiba._getTValues(uint256).tTransferAmount (#912)
Variable KaikenShiba._transferStandard(address,address,uint256).rTransferAmount (#1112) is too similar to KaikenShiba._transferStandard(address,address,uint256).tTransferAmount (#1112)
Variable KaikenShiba._transferToExcluded(address,address,uint256).rTransferAmount (#1121) is too similar to KaikenShiba._getTValues(uint256).tTransferAmount (#912)
Variable KaikenShiba._transferStandard(address,address,uint256).rTransferAmount (#1112) is too similar to KaikenShiba._transferBothExcluded(address,address,uint256).tTransferAmount (#858)
Variable KaikenShiba._getRValues(uint256,uint256,uint256,uint256).rTransferAmount (#920) is too similar to KaikenShiba._transferStandard(address,address,uint256).tTransferAmount (#1112)
Variable KaikenShiba._transferBothExcluded(address,address,uint256).rTransferAmount (#858) is too similar to KaikenShiba._transferBothExcluded(address,address,uint256).tTransferAmount (#858)
Variable KaikenShiba._getRValues(uint256,uint256,uint256,uint256).rTransferAmount (#920) is too similar to KaikenShiba._transferBothExcluded(address,address,uint256).tTransferAmount (#858)
Variable KaikenShiba._transferToExcluded(address,address,uint256).rTransferAmount (#1121) is too similar to KaikenShiba._transferStandard(address,address,uint256).tTransferAmount (#1112)
Variable KaikenShiba._transferFromExcluded(address,address,uint256).rTransferAmount (#1131) is too similar to KaikenShiba._transferFromExcluded(address,address,uint256).tTransferAmount (#1131)
Variable KaikenShiba._transferToExcluded(address,address,uint256).rTransferAmount (#1121) is too similar to KaikenShiba._transferBothExcluded(address,address,uint256).tTransferAmount (#858)
Variable KaikenShiba._getValues(uint256).rTransferAmount (#905) is too similar to KaikenShiba._transferFromExcluded(address,address,uint256).tTransferAmount (#1131)
Variable KaikenShiba._transferStandard(address,address,uint256).rTransferAmount (#1112) is too similar to KaikenShiba._getTValues(uint256).tTransferAmount (#912)
Variable KaikenShiba._transferStandard(address,address,uint256).rTransferAmount (#1112) is too similar to KaikenShiba._transferFromExcluded(address,address,uint256).tTransferAmount (#1131)
Variable KaikenShiba._transferToExcluded(address,address,uint256).rTransferAmount (#1121) is too similar to KaikenShiba._transferToExcluded(address,address,uint256).tTransferAmount (#1121)
Variable KaikenShiba._transferBothExcluded(address,address,uint256).rTransferAmount (#858) is too similar to KaikenShiba._transferFromExcluded(address,address,uint256).tTransferAmount (#1131)
Variable KaikenShiba._getRValues(uint256,uint256,uint256,uint256).rTransferAmount (#920) is too similar to KaikenShiba._transferFromExcluded(address,address,uint256).tTransferAmount (#1131)
Variable KaikenShiba._transferToExcluded(address,address,uint256).rTransferAmount (#1121) is too similar to KaikenShiba._transferFromExcluded(address,address,uint256).tTransferAmount (#1131)
Variable KaikenShiba._transferToExcluded(address,address,uint256).rTransferAmount (#1121) is too similar to KaikenShiba._getValues(uint256).tTransferAmount (#904)
Variable KaikenShiba._getValues(uint256).rTransferAmount (#905) is too similar to KaikenShiba._getTValues(uint256).tTransferAmount (#912)
Variable KaikenShiba._getValues(uint256).rTransferAmount (#905) is too similar to KaikenShiba._transferStandard(address,address,uint256).tTransferAmount (#1112)
Variable KaikenShiba._transferBothExcluded(address,address,uint256).rTransferAmount (#858) is too similar to KaikenShiba._getTValues(uint256).tTransferAmount (#912)
Variable KaikenShiba._transferStandard(address,address,uint256).rTransferAmount (#1112) is too similar to KaikenShiba._getValues(uint256).tTransferAmount (#904)
Variable KaikenShiba._transferBothExcluded(address,address,uint256).rTransferAmount (#858) is too similar to KaikenShiba._getValues(uint256).tTransferAmount (#904)
Variable KaikenShiba.reflectionFromToken(uint256,bool).rTransferAmount (#824) is too similar to KaikenShiba._transferStandard(address,address,uint256).tTransferAmount (#1112)
Variable KaikenShiba.reflectionFromToken(uint256,bool).rTransferAmount (#824) is too similar to KaikenShiba._transferToExcluded(address,address,uint256).tTransferAmount (#1121)
Variable KaikenShiba.reflectionFromToken(uint256,bool).rTransferAmount (#824) is too similar to KaikenShiba._transferBothExcluded(address,address,uint256).tTransferAmount (#858)
Variable KaikenShiba._getValues(uint256).rTransferAmount (#905) is too similar to KaikenShiba._getValues(uint256).tTransferAmount (#904)
Variable KaikenShiba._getRValues(uint256,uint256,uint256,uint256).rTransferAmount (#920) is too similar to KaikenShiba._transferToExcluded(address,address,uint256).tTransferAmount (#1121)
Variable KaikenShiba._transferStandard(address,address,uint256).rTransferAmount (#1112) is too similar to KaikenShiba._transferToExcluded(address,address,uint256).tTransferAmount (#1121)
Variable KaikenShiba._transferBothExcluded(address,address,uint256).rTransferAmount (#858) is too similar to KaikenShiba._transferToExcluded(address,address,uint256).tTransferAmount (#1121)
Variable KaikenShiba._transferBothExcluded(address,address,uint256).rTransferAmount (#858) is too similar to KaikenShiba._transferStandard(address,address,uint256).tTransferAmount (#1112)
Variable KaikenShiba.reflectionFromToken(uint256,bool).rTransferAmount (#824) is too similar to KaikenShiba._transferFromExcluded(address,address,uint256).tTransferAmount (#1131)
Variable KaikenShiba._getValues(uint256).rTransferAmount (#905) is too similar to KaikenShiba._transferToExcluded(address,address,uint256).tTransferAmount (#1121)
Variable KaikenShiba._transferFromExcluded(address,address,uint256).rTransferAmount (#1131) is too similar to KaikenShiba._getTValues(uint256).tTransferAmount (#912)
Variable KaikenShiba._transferFromExcluded(address,address,uint256).rTransferAmount (#1131) is too similar to KaikenShiba._getValues(uint256).tTransferAmount (#904)
Variable KaikenShiba.reflectionFromToken(uint256,bool).rTransferAmount (#824) is too similar to KaikenShiba._getTValues(uint256).tTransferAmount (#912)
Variable KaikenShiba.reflectionFromToken(uint256,bool).rTransferAmount (#824) is too similar to KaikenShiba._getValues(uint256).tTransferAmount (#904)
Variable KaikenShiba._transferFromExcluded(address,address,uint256).rTransferAmount (#1131) is too similar to KaikenShiba._transferStandard(address,address,uint256).tTransferAmount (#1112)
Variable KaikenShiba._transferFromExcluded(address,address,uint256).rTransferAmount (#1131) is too similar to KaikenShiba._transferBothExcluded(address,address,uint256).tTransferAmount (#858)
Variable KaikenShiba._transferFromExcluded(address,address,uint256).rTransferAmount (#1131) is too similar to KaikenShiba._transferToExcluded(address,address,uint256).tTransferAmount (#1121)
Variable KaikenShiba._getRValues(uint256,uint256,uint256,uint256).rTransferAmount (#920) is too similar to KaikenShiba._getValues(uint256).tTransferAmount (#904)
Prevent variables from having similar names.

Additional information: link

KaikenShiba.addLiquidity(uint256,uint256) (#1075-1088) uses literals with too many digits:
- uniswapV2Router.addLiquidityETH{value: ethAmount}(address(this),tokenAmount,0,0,address(0x0000000000000000000000000000000000000000),block.timestamp) (#1080-1087)
KaikenShiba.slitherConstructorVariables() (#681-1140) uses literals with too many digits:
- _tTotal = 999000000000000000 * 10 ** 9 (#695)
KaikenShiba.slitherConstructorVariables() (#681-1140) uses literals with too many digits:
- _maxTxAmount = 500000000000 * 10 ** 9 (#715)
KaikenShiba.slitherConstructorVariables() (#681-1140) uses literals with too many digits:
- numTokensSellToAddToLiquidity = 50000000000 * 10 ** 9 (#716)
Use: Ether suffix, Time suffix, or The scientific notation

Additional information: link

KaikenShiba._decimals (#701) should be constant
KaikenShiba._name (#699) should be constant
KaikenShiba._symbol (#700) should be constant
KaikenShiba._tTotal (#695) should be constant
KaikenShiba.numTokensSellToAddToLiquidity (#716) should be constant
Add the constant attributes to state variables that never change.

Additional information: link

renounceOwnership() should be declared external:
- Ownable.renounceOwnership() (#431-434)
transferOwnership(address) should be declared external:
- Ownable.transferOwnership(address) (#440-444)
geUnlockTime() should be declared external:
- Ownable.geUnlockTime() (#446-448)
lock(uint256) should be declared external:
- Ownable.lock(uint256) (#451-456)
unlock() should be declared external:
- Ownable.unlock() (#459-464)
name() should be declared external:
- KaikenShiba.name() (#750-752)
symbol() should be declared external:
- KaikenShiba.symbol() (#754-756)
decimals() should be declared external:
- KaikenShiba.decimals() (#758-760)
totalSupply() should be declared external:
- KaikenShiba.totalSupply() (#762-764)
transfer(address,uint256) should be declared external:
- KaikenShiba.transfer(address,uint256) (#771-774)
allowance(address,address) should be declared external:
- KaikenShiba.allowance(address,address) (#776-778)
approve(address,uint256) should be declared external:
- KaikenShiba.approve(address,uint256) (#780-783)
transferFrom(address,address,uint256) should be declared external:
- KaikenShiba.transferFrom(address,address,uint256) (#785-789)
increaseAllowance(address,uint256) should be declared external:
- KaikenShiba.increaseAllowance(address,uint256) (#791-794)
decreaseAllowance(address,uint256) should be declared external:
- KaikenShiba.decreaseAllowance(address,uint256) (#796-799)
isExcludedFromReward(address) should be declared external:
- KaikenShiba.isExcludedFromReward(address) (#801-803)
totalFees() should be declared external:
- KaikenShiba.totalFees() (#805-807)
deliver(uint256) should be declared external:
- KaikenShiba.deliver(uint256) (#809-816)
reflectionFromToken(uint256,bool) should be declared external:
- KaikenShiba.reflectionFromToken(uint256,bool) (#818-827)
excludeFromReward(address) should be declared external:
- KaikenShiba.excludeFromReward(address) (#835-843)
excludeFromFee(address) should be declared external:
- KaikenShiba.excludeFromFee(address) (#868-870)
includeInFee(address) should be declared external:
- KaikenShiba.includeInFee(address) (#872-874)
setSwapAndLiquifyEnabled(bool) should be declared external:
- KaikenShiba.setSwapAndLiquifyEnabled(bool) (#890-893)
isExcludedFromFee(address) should be declared external:
- KaikenShiba.isExcludedFromFee(address) (#976-978)
Use the external attribute for functions never called from the contract.

Additional information: link

Holders:


Average 30d PancakeSwap volume is low.


Average PancakeSwap trading volume, liqudity, number of swaps are low. Token seems to be inactive.


Token is deployed only at one blockchain


Unable to find PancakeSwap trading pair to compute liquidity.


Unable to find PancakeSwap trading pair to compute number of swaps.


Last post in Twitter was more than 30 days ago


Unable to find Discord account


Unable to find token on CoinHunt

Additional information: link


Young tokens have high risks of scam / price dump / death


Young tokens have high risks of price dump / death


Young tokens have high risks of price dump / death


Young tokens have high risks of price dump / death


Token has relatively low CoinGecko rank


Token has relatively low CoinMarketCap rank

Price for KSHIB

News for KSHIB