Kabosu Token Logo

KABOSU Token

About KABOSU

Listings

Token 13 months
CoinMarketCap 13 months
white paper

Kabosu (Japanese: かぼす) is a female Shiba Inu most famously known as the face of Doge.

Kabosu was born in November 2nd, 2005 in a Japanese pedigree puppy mill that was promptly shut down, leaving Kabosu stranded in one of Japan’s many animal shelters. The owner of Kabosu, Atsuko Sato, rescued her in 2008, saving her from certain death at the hands of humanity. Her name was given by a shelter volunteer – Kabosu is a type of fruit and said rescue worker mentioned that her face was very round, just like the fruit.

The goal of Kabosu is to prevent dogs of all breeds from being abandoned. For this reason we will be making weekly donations to community chosen dog charities!

Laser Scorebeta Last Audit: 19 February 2022

report
Token seems to be (relatively) fine. It still become a scam, but probability is moderate.

Reentrancy in Kabosu._transfer(address,address,uint256) (#988-1032):
External calls:
- swapAndLiquify(contractTokenBalance) (#1019)
- uniswapV2Router.addLiquidityETH{value: ethAmount}(address(this),tokenAmount,0,0,owner(),block.timestamp) (#1080-1087)
- uniswapV2Router.swapExactTokensForETHSupportingFeeOnTransferTokens(tokenAmount,0,path,address(this),block.timestamp) (#1066-1072)
External calls sending eth:
- swapAndLiquify(contractTokenBalance) (#1019)
- uniswapV2Router.addLiquidityETH{value: ethAmount}(address(this),tokenAmount,0,0,owner(),block.timestamp) (#1080-1087)
State variables written after the call(s):
- _tokenTransfer(from,to,amount,takeFee) (#1031)
- _rOwned[address(this)] = _rOwned[address(this)].add(rLiquidity) (#944)
- _rOwned[sender] = _rOwned[sender].sub(rAmount) (#1122)
- _rOwned[sender] = _rOwned[sender].sub(rAmount) (#1113)
- _rOwned[sender] = _rOwned[sender].sub(rAmount) (#1133)
- _rOwned[sender] = _rOwned[sender].sub(rAmount) (#860)
- _rOwned[recipient] = _rOwned[recipient].add(rTransferAmount) (#1114)
- _rOwned[recipient] = _rOwned[recipient].add(rTransferAmount) (#1134)
- _rOwned[recipient] = _rOwned[recipient].add(rTransferAmount) (#1124)
- _rOwned[recipient] = _rOwned[recipient].add(rTransferAmount) (#862)
- _tokenTransfer(from,to,amount,takeFee) (#1031)
- _rTotal = _rTotal.sub(rFee) (#899)
- _tokenTransfer(from,to,amount,takeFee) (#1031)
- _tOwned[address(this)] = _tOwned[address(this)].add(tLiquidity) (#946)
- _tOwned[sender] = _tOwned[sender].sub(tAmount) (#1132)
- _tOwned[sender] = _tOwned[sender].sub(tAmount) (#859)
- _tOwned[recipient] = _tOwned[recipient].add(tTransferAmount) (#1123)
- _tOwned[recipient] = _tOwned[recipient].add(tTransferAmount) (#861)
Apply the check-effects-interactions pattern.

Additional information: link


Unable to verify that contract auditor is trusted: Certik, Quantstamp, Hacken, Solidity, Paladinsec, Openzeppelin, Verichains

Kabosu.includeInReward(address) (#845-856) has costly operations inside a loop:
- _excluded.pop() (#852)
Use a local variable to hold the loop computation result.

Additional information: link

Kabosu.addLiquidity(uint256,uint256) (#1075-1088) ignores return value by uniswapV2Router.addLiquidityETH{value: ethAmount}(address(this),tokenAmount,0,0,owner(),block.timestamp) (#1080-1087)
Ensure that all the return values of the function calls are used.

Additional information: link

Kabosu.allowance(address,address).owner (#776) shadows:
- Ownable.owner() (#412-414) (function)
Kabosu._approve(address,address,uint256).owner (#980) shadows:
- Ownable.owner() (#412-414) (function)
Rename the local variables that shadow another component.

Additional information: link

Kabosu.setTaxFeePercent(uint256) (#876-878) should emit an event for:
- _taxFee = taxFee (#877)
Kabosu.setLiquidityFeePercent(uint256) (#880-882) should emit an event for:
- _liquidityFee = liquidityFee (#881)
Kabosu.setMaxTxPercent(uint256) (#884-888) should emit an event for:
- _maxTxAmount = _tTotal.mul(maxTxPercent).div(10 ** 2) (#885-887)
Emit an event for critical parameter changes.

Additional information: link

Reentrancy in Kabosu._transfer(address,address,uint256) (#988-1032):
External calls:
- swapAndLiquify(contractTokenBalance) (#1019)
- uniswapV2Router.addLiquidityETH{value: ethAmount}(address(this),tokenAmount,0,0,owner(),block.timestamp) (#1080-1087)
- uniswapV2Router.swapExactTokensForETHSupportingFeeOnTransferTokens(tokenAmount,0,path,address(this),block.timestamp) (#1066-1072)
External calls sending eth:
- swapAndLiquify(contractTokenBalance) (#1019)
- uniswapV2Router.addLiquidityETH{value: ethAmount}(address(this),tokenAmount,0,0,owner(),block.timestamp) (#1080-1087)
State variables written after the call(s):
- _tokenTransfer(from,to,amount,takeFee) (#1031)
- _liquidityFee = _previousLiquidityFee (#973)
- _liquidityFee = 0 (#968)
- _tokenTransfer(from,to,amount,takeFee) (#1031)
- _previousLiquidityFee = _liquidityFee (#965)
- _tokenTransfer(from,to,amount,takeFee) (#1031)
- _previousTaxFee = _taxFee (#964)
- _tokenTransfer(from,to,amount,takeFee) (#1031)
- _tFeeTotal = _tFeeTotal.add(tFee) (#900)
- _tokenTransfer(from,to,amount,takeFee) (#1031)
- _taxFee = _previousTaxFee (#972)
- _taxFee = 0 (#967)
Reentrancy in Kabosu.constructor() (#732-748):
External calls:
- uniswapV2Pair = IUniswapV2Factory(_uniswapV2Router.factory()).createPair(address(this),_uniswapV2Router.WETH()) (#737-738)
State variables written after the call(s):
- _isExcludedFromFee[owner()] = true (#744)
- _isExcludedFromFee[address(this)] = true (#745)
- uniswapV2Router = _uniswapV2Router (#741)
Reentrancy in Kabosu.swapAndLiquify(uint256) (#1034-1055):
External calls:
- swapTokensForEth(half) (#1046)
- uniswapV2Router.swapExactTokensForETHSupportingFeeOnTransferTokens(tokenAmount,0,path,address(this),block.timestamp) (#1066-1072)
- addLiquidity(otherHalf,newBalance) (#1052)
- uniswapV2Router.addLiquidityETH{value: ethAmount}(address(this),tokenAmount,0,0,owner(),block.timestamp) (#1080-1087)
External calls sending eth:
- addLiquidity(otherHalf,newBalance) (#1052)
- uniswapV2Router.addLiquidityETH{value: ethAmount}(address(this),tokenAmount,0,0,owner(),block.timestamp) (#1080-1087)
State variables written after the call(s):
- addLiquidity(otherHalf,newBalance) (#1052)
- _allowances[owner][spender] = amount (#984)
Reentrancy in Kabosu.transferFrom(address,address,uint256) (#785-789):
External calls:
- _transfer(sender,recipient,amount) (#786)
- uniswapV2Router.addLiquidityETH{value: ethAmount}(address(this),tokenAmount,0,0,owner(),block.timestamp) (#1080-1087)
- uniswapV2Router.swapExactTokensForETHSupportingFeeOnTransferTokens(tokenAmount,0,path,address(this),block.timestamp) (#1066-1072)
External calls sending eth:
- _transfer(sender,recipient,amount) (#786)
- uniswapV2Router.addLiquidityETH{value: ethAmount}(address(this),tokenAmount,0,0,owner(),block.timestamp) (#1080-1087)
State variables written after the call(s):
- _approve(sender,_msgSender(),_allowances[sender][_msgSender()].sub(amount,ERC20: transfer amount exceeds allowance)) (#787)
- _allowances[owner][spender] = amount (#984)
Apply the check-effects-interactions pattern.

Additional information: link

Reentrancy in Kabosu._transfer(address,address,uint256) (#988-1032):
External calls:
- swapAndLiquify(contractTokenBalance) (#1019)
- uniswapV2Router.addLiquidityETH{value: ethAmount}(address(this),tokenAmount,0,0,owner(),block.timestamp) (#1080-1087)
- uniswapV2Router.swapExactTokensForETHSupportingFeeOnTransferTokens(tokenAmount,0,path,address(this),block.timestamp) (#1066-1072)
External calls sending eth:
- swapAndLiquify(contractTokenBalance) (#1019)
- uniswapV2Router.addLiquidityETH{value: ethAmount}(address(this),tokenAmount,0,0,owner(),block.timestamp) (#1080-1087)
Event emitted after the call(s):
- Transfer(sender,recipient,tTransferAmount) (#1117)
- _tokenTransfer(from,to,amount,takeFee) (#1031)
- Transfer(sender,recipient,tTransferAmount) (#1137)
- _tokenTransfer(from,to,amount,takeFee) (#1031)
- Transfer(sender,recipient,tTransferAmount) (#1127)
- _tokenTransfer(from,to,amount,takeFee) (#1031)
- Transfer(sender,recipient,tTransferAmount) (#865)
- _tokenTransfer(from,to,amount,takeFee) (#1031)
Reentrancy in Kabosu.constructor() (#732-748):
External calls:
- uniswapV2Pair = IUniswapV2Factory(_uniswapV2Router.factory()).createPair(address(this),_uniswapV2Router.WETH()) (#737-738)
Event emitted after the call(s):
- Transfer(address(0),_msgSender(),_tTotal) (#747)
Reentrancy in Kabosu.swapAndLiquify(uint256) (#1034-1055):
External calls:
- swapTokensForEth(half) (#1046)
- uniswapV2Router.swapExactTokensForETHSupportingFeeOnTransferTokens(tokenAmount,0,path,address(this),block.timestamp) (#1066-1072)
- addLiquidity(otherHalf,newBalance) (#1052)
- uniswapV2Router.addLiquidityETH{value: ethAmount}(address(this),tokenAmount,0,0,owner(),block.timestamp) (#1080-1087)
External calls sending eth:
- addLiquidity(otherHalf,newBalance) (#1052)
- uniswapV2Router.addLiquidityETH{value: ethAmount}(address(this),tokenAmount,0,0,owner(),block.timestamp) (#1080-1087)
Event emitted after the call(s):
- Approval(owner,spender,amount) (#985)
- addLiquidity(otherHalf,newBalance) (#1052)
- SwapAndLiquify(half,newBalance,otherHalf) (#1054)
Reentrancy in Kabosu.transferFrom(address,address,uint256) (#785-789):
External calls:
- _transfer(sender,recipient,amount) (#786)
- uniswapV2Router.addLiquidityETH{value: ethAmount}(address(this),tokenAmount,0,0,owner(),block.timestamp) (#1080-1087)
- uniswapV2Router.swapExactTokensForETHSupportingFeeOnTransferTokens(tokenAmount,0,path,address(this),block.timestamp) (#1066-1072)
External calls sending eth:
- _transfer(sender,recipient,amount) (#786)
- uniswapV2Router.addLiquidityETH{value: ethAmount}(address(this),tokenAmount,0,0,owner(),block.timestamp) (#1080-1087)
Event emitted after the call(s):
- Approval(owner,spender,amount) (#985)
- _approve(sender,_msgSender(),_allowances[sender][_msgSender()].sub(amount,ERC20: transfer amount exceeds allowance)) (#787)
Apply the check-effects-interactions pattern.

Additional information: link

Ownable.unlock() (#459-464) uses timestamp for comparisons
Dangerous comparisons:
- require(bool,string)(now > _lockTime,Contract is locked until 7 days) (#461)
Avoid relying on block.timestamp.

Additional information: link

Address.isContract(address) (#264-273) uses assembly
- INLINE ASM (#271)
Address._functionCallWithValue(address,bytes,uint256,string) (#357-378) uses assembly
- INLINE ASM (#370-373)
Do not use evm assembly.

Additional information: link

Address._functionCallWithValue(address,bytes,uint256,string) (#357-378) is never used and should be removed
Address.functionCall(address,bytes) (#317-319) is never used and should be removed
Address.functionCall(address,bytes,string) (#327-329) is never used and should be removed
Address.functionCallWithValue(address,bytes,uint256) (#342-344) is never used and should be removed
Address.functionCallWithValue(address,bytes,uint256,string) (#352-355) is never used and should be removed
Address.isContract(address) (#264-273) is never used and should be removed
Address.sendValue(address,uint256) (#291-297) is never used and should be removed
Context._msgData() (#236-239) is never used and should be removed
SafeMath.mod(uint256,uint256) (#209-211) is never used and should be removed
SafeMath.mod(uint256,uint256,string) (#225-228) is never used and should be removed
Remove unused functions.

Additional information: link

Kabosu._rTotal (#696) is set pre-construction with a non-constant function or state variable:
- (MAX - (MAX % _tTotal))
Kabosu._previousTaxFee (#704) is set pre-construction with a non-constant function or state variable:
- _taxFee
Kabosu._previousLiquidityFee (#707) is set pre-construction with a non-constant function or state variable:
- _liquidityFee
Remove any initialization of state variables via non-constant state variables or function calls. If variables must be set upon contract deployment, locate initialization in the constructor instead.

Additional information: link

Low level call in Address.sendValue(address,uint256) (#291-297):
- (success) = recipient.call{value: amount}() (#295)
Low level call in Address._functionCallWithValue(address,bytes,uint256,string) (#357-378):
- (success,returndata) = target.call{value: weiValue}(data) (#361)
Avoid low-level calls. Check the call success. If the call is meant for a contract, check for code existence

Additional information: link

Function IUniswapV2Pair.DOMAIN_SEPARATOR() (#503) is not in mixedCase
Function IUniswapV2Pair.PERMIT_TYPEHASH() (#504) is not in mixedCase
Function IUniswapV2Pair.MINIMUM_LIQUIDITY() (#521) is not in mixedCase
Function IUniswapV2Router01.WETH() (#543) is not in mixedCase
Parameter Kabosu.setSwapAndLiquifyEnabled(bool)._enabled (#890) is not in mixedCase
Parameter Kabosu.calculateTaxFee(uint256)._amount (#949) is not in mixedCase
Parameter Kabosu.calculateLiquidityFee(uint256)._amount (#955) is not in mixedCase
Variable Kabosu._taxFee (#703) is not in mixedCase
Variable Kabosu._liquidityFee (#706) is not in mixedCase
Variable Kabosu._maxTxAmount (#715) is not in mixedCase
Follow the Solidity naming convention.

Additional information: link

Redundant expression "this (#237)" inContext (#231-240)
Remove redundant statements if they congest code but offer no value.

Additional information: link

Variable IUniswapV2Router01.addLiquidity(address,address,uint256,uint256,uint256,uint256,address,uint256).amountADesired (#548) is too similar to IUniswapV2Router01.addLiquidity(address,address,uint256,uint256,uint256,uint256,address,uint256).amountBDesired (#549)
Variable Kabosu._transferBothExcluded(address,address,uint256).rTransferAmount (#858) is too similar to Kabosu._transferStandard(address,address,uint256).tTransferAmount (#1112)
Variable Kabosu._getRValues(uint256,uint256,uint256,uint256).rTransferAmount (#920) is too similar to Kabosu._transferFromExcluded(address,address,uint256).tTransferAmount (#1131)
Variable Kabosu._transferToExcluded(address,address,uint256).rTransferAmount (#1121) is too similar to Kabosu._transferToExcluded(address,address,uint256).tTransferAmount (#1121)
Variable Kabosu.reflectionFromToken(uint256,bool).rTransferAmount (#824) is too similar to Kabosu._transferToExcluded(address,address,uint256).tTransferAmount (#1121)
Variable Kabosu._transferFromExcluded(address,address,uint256).rTransferAmount (#1131) is too similar to Kabosu._transferToExcluded(address,address,uint256).tTransferAmount (#1121)
Variable Kabosu._transferBothExcluded(address,address,uint256).rTransferAmount (#858) is too similar to Kabosu._transferToExcluded(address,address,uint256).tTransferAmount (#1121)
Variable Kabosu._transferFromExcluded(address,address,uint256).rTransferAmount (#1131) is too similar to Kabosu._transferBothExcluded(address,address,uint256).tTransferAmount (#858)
Variable Kabosu.reflectionFromToken(uint256,bool).rTransferAmount (#824) is too similar to Kabosu._transferBothExcluded(address,address,uint256).tTransferAmount (#858)
Variable Kabosu._transferStandard(address,address,uint256).rTransferAmount (#1112) is too similar to Kabosu._transferStandard(address,address,uint256).tTransferAmount (#1112)
Variable Kabosu._transferToExcluded(address,address,uint256).rTransferAmount (#1121) is too similar to Kabosu._transferFromExcluded(address,address,uint256).tTransferAmount (#1131)
Variable Kabosu.reflectionFromToken(uint256,bool).rTransferAmount (#824) is too similar to Kabosu._getValues(uint256).tTransferAmount (#904)
Variable Kabosu.reflectionFromToken(uint256,bool).rTransferAmount (#824) is too similar to Kabosu._transferFromExcluded(address,address,uint256).tTransferAmount (#1131)
Variable Kabosu._transferBothExcluded(address,address,uint256).rTransferAmount (#858) is too similar to Kabosu._transferFromExcluded(address,address,uint256).tTransferAmount (#1131)
Variable Kabosu._transferFromExcluded(address,address,uint256).rTransferAmount (#1131) is too similar to Kabosu._transferFromExcluded(address,address,uint256).tTransferAmount (#1131)
Variable Kabosu._transferToExcluded(address,address,uint256).rTransferAmount (#1121) is too similar to Kabosu._transferStandard(address,address,uint256).tTransferAmount (#1112)
Variable Kabosu._getRValues(uint256,uint256,uint256,uint256).rTransferAmount (#920) is too similar to Kabosu._transferBothExcluded(address,address,uint256).tTransferAmount (#858)
Variable Kabosu._getValues(uint256).rTransferAmount (#905) is too similar to Kabosu._transferBothExcluded(address,address,uint256).tTransferAmount (#858)
Variable Kabosu._getValues(uint256).rTransferAmount (#905) is too similar to Kabosu._transferStandard(address,address,uint256).tTransferAmount (#1112)
Variable Kabosu._getRValues(uint256,uint256,uint256,uint256).rTransferAmount (#920) is too similar to Kabosu._transferStandard(address,address,uint256).tTransferAmount (#1112)
Variable Kabosu._getRValues(uint256,uint256,uint256,uint256).rTransferAmount (#920) is too similar to Kabosu._transferToExcluded(address,address,uint256).tTransferAmount (#1121)
Variable Kabosu._getValues(uint256).rTransferAmount (#905) is too similar to Kabosu._transferToExcluded(address,address,uint256).tTransferAmount (#1121)
Variable Kabosu.reflectionFromToken(uint256,bool).rTransferAmount (#824) is too similar to Kabosu._transferStandard(address,address,uint256).tTransferAmount (#1112)
Variable Kabosu._transferBothExcluded(address,address,uint256).rTransferAmount (#858) is too similar to Kabosu._transferBothExcluded(address,address,uint256).tTransferAmount (#858)
Variable Kabosu._getValues(uint256).rTransferAmount (#905) is too similar to Kabosu._transferFromExcluded(address,address,uint256).tTransferAmount (#1131)
Variable Kabosu._transferFromExcluded(address,address,uint256).rTransferAmount (#1131) is too similar to Kabosu._transferStandard(address,address,uint256).tTransferAmount (#1112)
Variable Kabosu._transferToExcluded(address,address,uint256).rTransferAmount (#1121) is too similar to Kabosu._getValues(uint256).tTransferAmount (#904)
Variable Kabosu._transferStandard(address,address,uint256).rTransferAmount (#1112) is too similar to Kabosu._transferFromExcluded(address,address,uint256).tTransferAmount (#1131)
Variable Kabosu._transferStandard(address,address,uint256).rTransferAmount (#1112) is too similar to Kabosu._transferBothExcluded(address,address,uint256).tTransferAmount (#858)
Variable Kabosu._transferStandard(address,address,uint256).rTransferAmount (#1112) is too similar to Kabosu._transferToExcluded(address,address,uint256).tTransferAmount (#1121)
Variable Kabosu._getRValues(uint256,uint256,uint256,uint256).rTransferAmount (#920) is too similar to Kabosu._getTValues(uint256).tTransferAmount (#912)
Variable Kabosu._transferToExcluded(address,address,uint256).rTransferAmount (#1121) is too similar to Kabosu._transferBothExcluded(address,address,uint256).tTransferAmount (#858)
Variable Kabosu._transferFromExcluded(address,address,uint256).rTransferAmount (#1131) is too similar to Kabosu._getValues(uint256).tTransferAmount (#904)
Variable Kabosu.reflectionFromToken(uint256,bool).rTransferAmount (#824) is too similar to Kabosu._getTValues(uint256).tTransferAmount (#912)
Variable Kabosu._getValues(uint256).rTransferAmount (#905) is too similar to Kabosu._getTValues(uint256).tTransferAmount (#912)
Variable Kabosu._transferStandard(address,address,uint256).rTransferAmount (#1112) is too similar to Kabosu._getTValues(uint256).tTransferAmount (#912)
Variable Kabosu._transferBothExcluded(address,address,uint256).rTransferAmount (#858) is too similar to Kabosu._getTValues(uint256).tTransferAmount (#912)
Variable Kabosu._getRValues(uint256,uint256,uint256,uint256).rTransferAmount (#920) is too similar to Kabosu._getValues(uint256).tTransferAmount (#904)
Variable Kabosu._transferToExcluded(address,address,uint256).rTransferAmount (#1121) is too similar to Kabosu._getTValues(uint256).tTransferAmount (#912)
Variable Kabosu._getValues(uint256).rTransferAmount (#905) is too similar to Kabosu._getValues(uint256).tTransferAmount (#904)
Variable Kabosu._transferBothExcluded(address,address,uint256).rTransferAmount (#858) is too similar to Kabosu._getValues(uint256).tTransferAmount (#904)
Variable Kabosu._transferStandard(address,address,uint256).rTransferAmount (#1112) is too similar to Kabosu._getValues(uint256).tTransferAmount (#904)
Variable Kabosu._transferFromExcluded(address,address,uint256).rTransferAmount (#1131) is too similar to Kabosu._getTValues(uint256).tTransferAmount (#912)
Prevent variables from having similar names.

Additional information: link

Kabosu.slitherConstructorVariables() (#681-1144) uses literals with too many digits:
- _tTotal = 1000000000 * 10 ** 6 * 10 ** 9 (#695)
Kabosu.slitherConstructorVariables() (#681-1144) uses literals with too many digits:
- _maxTxAmount = 5000000 * 10 ** 6 * 10 ** 9 (#715)
Kabosu.slitherConstructorVariables() (#681-1144) uses literals with too many digits:
- numTokensSellToAddToLiquidity = 500000 * 10 ** 6 * 10 ** 9 (#716)
Use: Ether suffix, Time suffix, or The scientific notation

Additional information: link

Kabosu._decimals (#701) should be constant
Kabosu._name (#699) should be constant
Kabosu._symbol (#700) should be constant
Kabosu._tTotal (#695) should be constant
Kabosu.numTokensSellToAddToLiquidity (#716) should be constant
Add the constant attributes to state variables that never change.

Additional information: link

renounceOwnership() should be declared external:
- Ownable.renounceOwnership() (#431-434)
transferOwnership(address) should be declared external:
- Ownable.transferOwnership(address) (#440-444)
geUnlockTime() should be declared external:
- Ownable.geUnlockTime() (#446-448)
lock(uint256) should be declared external:
- Ownable.lock(uint256) (#451-456)
unlock() should be declared external:
- Ownable.unlock() (#459-464)
name() should be declared external:
- Kabosu.name() (#750-752)
symbol() should be declared external:
- Kabosu.symbol() (#754-756)
decimals() should be declared external:
- Kabosu.decimals() (#758-760)
totalSupply() should be declared external:
- Kabosu.totalSupply() (#762-764)
transfer(address,uint256) should be declared external:
- Kabosu.transfer(address,uint256) (#771-774)
allowance(address,address) should be declared external:
- Kabosu.allowance(address,address) (#776-778)
approve(address,uint256) should be declared external:
- Kabosu.approve(address,uint256) (#780-783)
transferFrom(address,address,uint256) should be declared external:
- Kabosu.transferFrom(address,address,uint256) (#785-789)
increaseAllowance(address,uint256) should be declared external:
- Kabosu.increaseAllowance(address,uint256) (#791-794)
decreaseAllowance(address,uint256) should be declared external:
- Kabosu.decreaseAllowance(address,uint256) (#796-799)
isExcludedFromReward(address) should be declared external:
- Kabosu.isExcludedFromReward(address) (#801-803)
totalFees() should be declared external:
- Kabosu.totalFees() (#805-807)
deliver(uint256) should be declared external:
- Kabosu.deliver(uint256) (#809-816)
reflectionFromToken(uint256,bool) should be declared external:
- Kabosu.reflectionFromToken(uint256,bool) (#818-827)
excludeFromReward(address) should be declared external:
- Kabosu.excludeFromReward(address) (#835-843)
excludeFromFee(address) should be declared external:
- Kabosu.excludeFromFee(address) (#868-870)
includeInFee(address) should be declared external:
- Kabosu.includeInFee(address) (#872-874)
setSwapAndLiquifyEnabled(bool) should be declared external:
- Kabosu.setSwapAndLiquifyEnabled(bool) (#890-893)
isExcludedFromFee(address) should be declared external:
- Kabosu.isExcludedFromFee(address) (#976-978)
Use the external attribute for functions never called from the contract.

Additional information: link

Holders:


Average 30d PancakeSwap liquidity is less than $100. Token is either dead or inactive.


Average 30d number of PancakeSwap swaps is less than 1. Token is either dead or inactive.


Token is deployed only at one blockchain

Contract has 10% buy tax and 7% sell tax.
Taxes are low and contract ownership is renounced.


Unable to find Youtube account


Unable to find code repository for the project


Young tokens have high risks of scam / price dump / death


Young tokens have high risks of price dump / death


Young tokens have high risks of price dump / death


Young tokens have high risks of price dump / death


Token has relatively low CoinGecko rank


Token has relatively low CoinMarketCap rank

Price for KABOSU

News for KABOSU