felon [ElonRugged] Token

Unable to find manual contract audit (e.g. Certik, PeckShield, Solidity...)

SOM.swapBack() (#573-621) sends eth to arbitrary user
Dangerous calls:
- distributor.deposit{value: amountBNBReflection}() (#602)
- (tmpSuccess) = address(marketingFeeReceiver).call{gas: 30000,value: amountBNBMarketing}() (#603)
- (tmpSuccess,None) = address(BUYBACKReceiver).call{gas: 30000,value: amountBNBTeam}() (#604)
- (tmpSuccess,None) = address(devFeeReceiver).call{gas: 30000,value: amountBNBDev}() (#605)
Ensure that an arbitrary user cannot withdraw unauthorized funds.

Additional information: link

Reentrancy in SOM._transferFrom(address,address,uint256) (#457-505):
External calls:
- swapBack() (#484)
- router.swapExactTokensForETHSupportingFeeOnTransferTokens(amountToSwap,0,path,address(this),block.timestamp) (#584-590)
- distributor.deposit{value: amountBNBReflection}() (#602)
- (tmpSuccess) = address(marketingFeeReceiver).call{gas: 30000,value: amountBNBMarketing}() (#603)
- (tmpSuccess,None) = address(BUYBACKReceiver).call{gas: 30000,value: amountBNBTeam}() (#604)
- (tmpSuccess,None) = address(devFeeReceiver).call{gas: 30000,value: amountBNBDev}() (#605)
- router.addLiquidityETH{value: amountBNBLiquidity}(address(this),amountToLiquify,0,0,autoLiquidityReceiver,block.timestamp) (#611-618)
External calls sending eth:
- swapBack() (#484)
- distributor.deposit{value: amountBNBReflection}() (#602)
- (tmpSuccess) = address(marketingFeeReceiver).call{gas: 30000,value: amountBNBMarketing}() (#603)
- (tmpSuccess,None) = address(BUYBACKReceiver).call{gas: 30000,value: amountBNBTeam}() (#604)
- (tmpSuccess,None) = address(devFeeReceiver).call{gas: 30000,value: amountBNBDev}() (#605)
- router.addLiquidityETH{value: amountBNBLiquidity}(address(this),amountToLiquify,0,0,autoLiquidityReceiver,block.timestamp) (#611-618)
State variables written after the call(s):
- _balances[sender] = _balances[sender].sub(amount,Insufficient Balance) (#487)
- _balances[recipient] = _balances[recipient].add(amountReceived) (#490)
- amountReceived = takeFee(sender,amount,(recipient == pair)) (#489)
- _balances[address(this)] = _balances[address(this)].add(contractTokens) (#530)
- _balances[burnFeeReceiver] = _balances[burnFeeReceiver].add(burnTokens) (#531)
Apply the check-effects-interactions pattern.

Additional information: link

SOM.swapBack().tmpSuccess (#603) is written in both
(tmpSuccess) = address(marketingFeeReceiver).call{gas: 30000,value: amountBNBMarketing}() (#603)
(tmpSuccess,None) = address(BUYBACKReceiver).call{gas: 30000,value: amountBNBTeam}() (#604)
SOM.swapBack().tmpSuccess (#603) is written in both
(tmpSuccess,None) = address(BUYBACKReceiver).call{gas: 30000,value: amountBNBTeam}() (#604)
(tmpSuccess,None) = address(devFeeReceiver).call{gas: 30000,value: amountBNBDev}() (#605)
SOM.swapBack().tmpSuccess (#603) is written in both
(tmpSuccess,None) = address(devFeeReceiver).call{gas: 30000,value: amountBNBDev}() (#605)
tmpSuccess = false (#608)
Fix or remove the writes.

Additional information: link

Combination 1: Reentrancy vulnerabilities + Functions that send Ether to arbitraty destination. Usual for scams. May be justified by some complex mechanics (e.g. rebase, reflections). DYOR & manual audit are advised.

SOM.takeFee(address,uint256,bool) (#522-539) performs a multiplication on the result of a division:
-feeAmount = amount.mul(totalFee).mul(multiplier).div(feeDenominator * 100) (#525)
-burnTokens = feeAmount.mul(burnFee).div(totalFee) (#527)
Consider ordering multiplication before division.

Additional information: link

SOM.manage_blacklist(address[],bool).i (#639) is a local variable never initialized
Initialize all the variables. If a variable is meant to be initialized to zero, explicitly set it to zero to improve code readability.

Additional information: link

SOM.swapBack() (#573-621) ignores return value by router.addLiquidityETH{value: amountBNBLiquidity}(address(this),amountToLiquify,0,0,autoLiquidityReceiver,block.timestamp) (#611-618)
Ensure that all the return values of the function calls are used.

Additional information: link

DividendDistributor.setDistributionCriteria(uint256,uint256) (#215-218) should emit an event for:
- minPeriod = _minPeriod (#216)
- minDistribution = _minDistribution (#217)
DividendDistributor.deposit() (#236-239) should emit an event for:
- dividendsPerShare = dividendsPerShare.add(dividendsPerShareAccuracyFactor.mul(msg.value).div(totalShares)) (#238)
SOM.setMaxTxPercent_base1000(uint256) (#448-450) should emit an event for:
- _maxTxAmount = (_totalSupply * maxTXPercentage_base1000) / 1000 (#449)
SOM.setTxLimit(uint256) (#452-454) should emit an event for:
- _maxTxAmount = amount (#453)
SOM.set_sell_multiplier(uint256) (#558-560) should emit an event for:
- sellMultiplier = Multiplier (#559)
SOM.setFees(uint256,uint256,uint256,uint256,uint256,uint256,uint256) (#657-667) should emit an event for:
- liquidityFee = _liquidityFee (#658)
- reflectionFee = _reflectionFee (#659)
- marketingFee = _marketingFee (#660)
- BUYBACK = _BUYBACK (#661)
- devFee = _devFee (#662)
- burnFee = _burnFee (#663)
- totalFee = _liquidityFee + _reflectionFee + _marketingFee + _BUYBACK + _burnFee + _devFee (#664)
- feeDenominator = _feeDenominator (#665)
SOM.setSwapBackSettings(bool,uint256) (#677-680) should emit an event for:
- swapThreshold = _amount (#679)
SOM.setTargetLiquidity(uint256,uint256) (#682-685) should emit an event for:
- targetLiquidity = _target (#683)
- targetLiquidityDenominator = _denominator (#684)
Emit an event for critical parameter changes.

Additional information: link

DividendDistributor.constructor(address)._tokenowner (#210) lacks a zero-check on :
- _owner = _tokenowner (#212)
Auth.transferOwnership(address).adr (#100) lacks a zero-check on :
- owner = adr (#101)
SOM.setFeeReceivers(address,address,address,address,address)._autoLiquidityReceiver (#669) lacks a zero-check on :
- autoLiquidityReceiver = _autoLiquidityReceiver (#670)
SOM.setFeeReceivers(address,address,address,address,address)._marketingFeeReceiver (#669) lacks a zero-check on :
- marketingFeeReceiver = _marketingFeeReceiver (#671)
SOM.setFeeReceivers(address,address,address,address,address)._BUYBACKReceiver (#669) lacks a zero-check on :
- BUYBACKReceiver = _BUYBACKReceiver (#672)
SOM.setFeeReceivers(address,address,address,address,address)._burnFeeReceiver (#669) lacks a zero-check on :
- burnFeeReceiver = _burnFeeReceiver (#673)
SOM.setFeeReceivers(address,address,address,address,address)._devFeeReceiver (#669) lacks a zero-check on :
- devFeeReceiver = _devFeeReceiver (#674)
Check that the address is not zero.

Additional information: link

DividendDistributor.distributeDividend(address) (#272-285) has external calls inside a loop: address(shareholder).transfer(amount) (#279)
SOM.multiTransfer(address,address[],uint256[]) (#711-735) has external calls inside a loop: distributor.setShare(addresses[i_scope_0],_balances[addresses[i_scope_0]]) (#727)
SOM.multiTransfer_fixed(address,address[],uint256) (#737-756) has external calls inside a loop: distributor.setShare(addresses[i],_balances[addresses[i]]) (#748)
Favor pull over push strategy for external calls.

Additional information: link

Reentrancy in SOM.constructor() (#383-411):
External calls:
- pair = IDEXFactory(router.factory()).createPair(WBNB,address(this)) (#387)
State variables written after the call(s):
- BUYBACKReceiver = 0xE3674cB5dB7510e91A70Ab769f789283F09C6927 (#405)
- _allowances[address(this)][address(router)] = uint256(- 1) (#388)
- _balances[msg.sender] = _totalSupply (#409)
- autoLiquidityReceiver = msg.sender (#403)
- burnFeeReceiver = DEAD (#407)
- devFeeReceiver = msg.sender (#406)
- distributor = new DividendDistributor(address(msg.sender)) (#390)
- isDividendExempt[pair] = true (#399)
- isDividendExempt[address(this)] = true (#400)
- isDividendExempt[DEAD] = true (#401)
- isFeeExempt[msg.sender] = true (#392)
- isTimelockExempt[msg.sender] = true (#395)
- isTimelockExempt[DEAD] = true (#396)
- isTimelockExempt[address(this)] = true (#397)
- isTxLimitExempt[msg.sender] = true (#393)
- marketingFeeReceiver = 0xf8DfC8fb251BcAe47Fd4bDA46fD69A1cf92fC842 (#404)
Apply the check-effects-interactions pattern.

Additional information: link

Reentrancy in SOM._transferFrom(address,address,uint256) (#457-505):
External calls:
- swapBack() (#484)
- router.swapExactTokensForETHSupportingFeeOnTransferTokens(amountToSwap,0,path,address(this),block.timestamp) (#584-590)
- distributor.deposit{value: amountBNBReflection}() (#602)
- (tmpSuccess) = address(marketingFeeReceiver).call{gas: 30000,value: amountBNBMarketing}() (#603)
- (tmpSuccess,None) = address(BUYBACKReceiver).call{gas: 30000,value: amountBNBTeam}() (#604)
- (tmpSuccess,None) = address(devFeeReceiver).call{gas: 30000,value: amountBNBDev}() (#605)
- router.addLiquidityETH{value: amountBNBLiquidity}(address(this),amountToLiquify,0,0,autoLiquidityReceiver,block.timestamp) (#611-618)
- distributor.setShare(sender,_balances[sender]) (#494)
- distributor.setShare(recipient,_balances[recipient]) (#498)
- distributor.process(distributorGas) (#501)
External calls sending eth:
- swapBack() (#484)
- distributor.deposit{value: amountBNBReflection}() (#602)
- (tmpSuccess) = address(marketingFeeReceiver).call{gas: 30000,value: amountBNBMarketing}() (#603)
- (tmpSuccess,None) = address(BUYBACKReceiver).call{gas: 30000,value: amountBNBTeam}() (#604)
- (tmpSuccess,None) = address(devFeeReceiver).call{gas: 30000,value: amountBNBDev}() (#605)
- router.addLiquidityETH{value: amountBNBLiquidity}(address(this),amountToLiquify,0,0,autoLiquidityReceiver,block.timestamp) (#611-618)
Event emitted after the call(s):
- Transfer(sender,recipient,amountReceived) (#503)
Reentrancy in SOM._transferFrom(address,address,uint256) (#457-505):
External calls:
- swapBack() (#484)
- router.swapExactTokensForETHSupportingFeeOnTransferTokens(amountToSwap,0,path,address(this),block.timestamp) (#584-590)
- distributor.deposit{value: amountBNBReflection}() (#602)
- (tmpSuccess) = address(marketingFeeReceiver).call{gas: 30000,value: amountBNBMarketing}() (#603)
- (tmpSuccess,None) = address(BUYBACKReceiver).call{gas: 30000,value: amountBNBTeam}() (#604)
- (tmpSuccess,None) = address(devFeeReceiver).call{gas: 30000,value: amountBNBDev}() (#605)
- router.addLiquidityETH{value: amountBNBLiquidity}(address(this),amountToLiquify,0,0,autoLiquidityReceiver,block.timestamp) (#611-618)
External calls sending eth:
- swapBack() (#484)
- distributor.deposit{value: amountBNBReflection}() (#602)
- (tmpSuccess) = address(marketingFeeReceiver).call{gas: 30000,value: amountBNBMarketing}() (#603)
- (tmpSuccess,None) = address(BUYBACKReceiver).call{gas: 30000,value: amountBNBTeam}() (#604)
- (tmpSuccess,None) = address(devFeeReceiver).call{gas: 30000,value: amountBNBDev}() (#605)
- router.addLiquidityETH{value: amountBNBLiquidity}(address(this),amountToLiquify,0,0,autoLiquidityReceiver,block.timestamp) (#611-618)
Event emitted after the call(s):
- Transfer(sender,address(this),contractTokens) (#532)
- amountReceived = takeFee(sender,amount,(recipient == pair)) (#489)
- Transfer(sender,burnFeeReceiver,burnTokens) (#535)
- amountReceived = takeFee(sender,amount,(recipient == pair)) (#489)
Reentrancy in SOM.constructor() (#383-411):
External calls:
- pair = IDEXFactory(router.factory()).createPair(WBNB,address(this)) (#387)
Event emitted after the call(s):
- Transfer(address(0),msg.sender,_totalSupply) (#410)
Reentrancy in SOM.swapBack() (#573-621):
External calls:
- router.swapExactTokensForETHSupportingFeeOnTransferTokens(amountToSwap,0,path,address(this),block.timestamp) (#584-590)
- distributor.deposit{value: amountBNBReflection}() (#602)
- (tmpSuccess) = address(marketingFeeReceiver).call{gas: 30000,value: amountBNBMarketing}() (#603)
- (tmpSuccess,None) = address(BUYBACKReceiver).call{gas: 30000,value: amountBNBTeam}() (#604)
- (tmpSuccess,None) = address(devFeeReceiver).call{gas: 30000,value: amountBNBDev}() (#605)
- router.addLiquidityETH{value: amountBNBLiquidity}(address(this),amountToLiquify,0,0,autoLiquidityReceiver,block.timestamp) (#611-618)
External calls sending eth:
- distributor.deposit{value: amountBNBReflection}() (#602)
- (tmpSuccess) = address(marketingFeeReceiver).call{gas: 30000,value: amountBNBMarketing}() (#603)
- (tmpSuccess,None) = address(BUYBACKReceiver).call{gas: 30000,value: amountBNBTeam}() (#604)
- (tmpSuccess,None) = address(devFeeReceiver).call{gas: 30000,value: amountBNBDev}() (#605)
- router.addLiquidityETH{value: amountBNBLiquidity}(address(this),amountToLiquify,0,0,autoLiquidityReceiver,block.timestamp) (#611-618)
Event emitted after the call(s):
- AutoLiquify(amountBNBLiquidity,amountToLiquify) (#619)
Apply the check-effects-interactions pattern.

Additional information: link

DividendDistributor.shouldDistribute(address) (#267-270) uses timestamp for comparisons
Dangerous comparisons:
- shareholderClaims[shareholder] + minPeriod < block.timestamp && getUnpaidEarnings(shareholder) > minDistribution (#268-269)
SOM._transferFrom(address,address,uint256) (#457-505) uses timestamp for comparisons
Dangerous comparisons:
- require(bool,string)(cooldownTimer[recipient] < block.timestamp,Please wait for 1min between two buys) (#477)
Avoid relying on block.timestamp.

Additional information: link

DividendDistributor.process(uint256) (#241-265) has costly operations inside a loop:
- currentIndex = 0 (#253)
DividendDistributor.distributeDividend(address) (#272-285) has costly operations inside a loop:
- totalDistributed = totalDistributed.add(amount) (#277)
DividendDistributor.process(uint256) (#241-265) has costly operations inside a loop:
- currentIndex ++ (#262)
Use a local variable to hold the loop computation result.

Additional information: link

SOM._maxTxAmount (#331) is set pre-construction with a non-constant function or state variable:
- _totalSupply / 100
SOM._maxWalletToken (#332) is set pre-construction with a non-constant function or state variable:
- _totalSupply / 50
SOM.totalFee (#352) is set pre-construction with a non-constant function or state variable:
- marketingFee + reflectionFee + liquidityFee + BUYBACK + burnFee + devFee
SOM.swapThreshold (#379) is set pre-construction with a non-constant function or state variable:
- _totalSupply * 10 / 10000
Remove any initialization of state variables via non-constant state variables or function calls. If variables must be set upon contract deployment, locate initialization in the constructor instead.

Additional information: link

Pragma version^0.7.4 (#11) allows old versions
solc-0.7.4 is not recommended for deployment
Deploy with any of the following Solidity versions: 0.5.16 - 0.5.17, 0.6.11 - 0.6.12, 0.7.5 - 0.7.6 Use a simple pragma version that allows any of these versions. Consider using the latest version of Solidity for testing.

Additional information: link

Low level call in SOM.swapBack() (#573-621):
- (tmpSuccess) = address(marketingFeeReceiver).call{gas: 30000,value: amountBNBMarketing}() (#603)
- (tmpSuccess,None) = address(BUYBACKReceiver).call{gas: 30000,value: amountBNBTeam}() (#604)
- (tmpSuccess,None) = address(devFeeReceiver).call{gas: 30000,value: amountBNBDev}() (#605)
Avoid low-level calls. Check the call success. If the call is meant for a contract, check for code existence

Additional information: link

Function IDEXRouter.WETH() (#115) is not in mixedCase
Parameter DividendDistributor.setDistributionCriteria(uint256,uint256)._minPeriod (#215) is not in mixedCase
Parameter DividendDistributor.setDistributionCriteria(uint256,uint256)._minDistribution (#215) is not in mixedCase
Variable DividendDistributor._token (#171) is not in mixedCase
Variable DividendDistributor._owner (#172) is not in mixedCase
Variable DividendDistributor.RWRD (#180) is not in mixedCase
Function SOM.setMaxWalletPercent_base1000(uint256) (#445-447) is not in mixedCase
Parameter SOM.setMaxWalletPercent_base1000(uint256).maxWallPercent_base1000 (#445) is not in mixedCase
Function SOM.setMaxTxPercent_base1000(uint256) (#448-450) is not in mixedCase
Parameter SOM.setMaxTxPercent_base1000(uint256).maxTXPercentage_base1000 (#448) is not in mixedCase
Function SOM.clearStuckBalance_sender(uint256) (#553-556) is not in mixedCase
Function SOM.set_sell_multiplier(uint256) (#558-560) is not in mixedCase
Parameter SOM.set_sell_multiplier(uint256).Multiplier (#558) is not in mixedCase
Parameter SOM.tradingStatus(bool)._status (#563) is not in mixedCase
Parameter SOM.cooldownEnabled(bool,uint8)._status (#568) is not in mixedCase
Parameter SOM.cooldownEnabled(bool,uint8)._interval (#568) is not in mixedCase
Function SOM.enable_blacklist(bool) (#634-636) is not in mixedCase
Parameter SOM.enable_blacklist(bool)._status (#634) is not in mixedCase
Function SOM.manage_blacklist(address[],bool) (#638-642) is not in mixedCase
Parameter SOM.setFees(uint256,uint256,uint256,uint256,uint256,uint256,uint256)._liquidityFee (#657) is not in mixedCase
Parameter SOM.setFees(uint256,uint256,uint256,uint256,uint256,uint256,uint256)._reflectionFee (#657) is not in mixedCase
Parameter SOM.setFees(uint256,uint256,uint256,uint256,uint256,uint256,uint256)._marketingFee (#657) is not in mixedCase
Parameter SOM.setFees(uint256,uint256,uint256,uint256,uint256,uint256,uint256)._BUYBACK (#657) is not in mixedCase
Parameter SOM.setFees(uint256,uint256,uint256,uint256,uint256,uint256,uint256)._burnFee (#657) is not in mixedCase
Parameter SOM.setFees(uint256,uint256,uint256,uint256,uint256,uint256,uint256)._devFee (#657) is not in mixedCase
Parameter SOM.setFees(uint256,uint256,uint256,uint256,uint256,uint256,uint256)._feeDenominator (#657) is not in mixedCase
Parameter SOM.setFeeReceivers(address,address,address,address,address)._autoLiquidityReceiver (#669) is not in mixedCase
Parameter SOM.setFeeReceivers(address,address,address,address,address)._marketingFeeReceiver (#669) is not in mixedCase
Parameter SOM.setFeeReceivers(address,address,address,address,address)._BUYBACKReceiver (#669) is not in mixedCase
Parameter SOM.setFeeReceivers(address,address,address,address,address)._burnFeeReceiver (#669) is not in mixedCase
Parameter SOM.setFeeReceivers(address,address,address,address,address)._devFeeReceiver (#669) is not in mixedCase
Parameter SOM.setSwapBackSettings(bool,uint256)._enabled (#677) is not in mixedCase
Parameter SOM.setSwapBackSettings(bool,uint256)._amount (#677) is not in mixedCase
Parameter SOM.setTargetLiquidity(uint256,uint256)._target (#682) is not in mixedCase
Parameter SOM.setTargetLiquidity(uint256,uint256)._denominator (#682) is not in mixedCase
Parameter SOM.setDistributionCriteria(uint256,uint256)._minPeriod (#687) is not in mixedCase
Parameter SOM.setDistributionCriteria(uint256,uint256)._minDistribution (#687) is not in mixedCase
Function SOM.multiTransfer_fixed(address,address[],uint256) (#737-756) is not in mixedCase
Variable SOM.WBNB (#321) is not in mixedCase
Variable SOM.DEAD (#322) is not in mixedCase
Variable SOM.ZERO (#323) is not in mixedCase
Constant SOM._name (#325) is not in UPPER_CASE_WITH_UNDERSCORES
Constant SOM._symbol (#326) is not in UPPER_CASE_WITH_UNDERSCORES
Constant SOM._decimals (#327) is not in UPPER_CASE_WITH_UNDERSCORES
Variable SOM._totalSupply (#329) is not in mixedCase
Variable SOM._maxTxAmount (#331) is not in mixedCase
Variable SOM._maxWalletToken (#332) is not in mixedCase
Variable SOM._balances (#334) is not in mixedCase
Variable SOM._allowances (#335) is not in mixedCase
Variable SOM.BUYBACK (#349) is not in mixedCase
Variable SOM.BUYBACKReceiver (#359) is not in mixedCase
Follow the Solidity naming convention.

Additional information: link

Reentrancy in DividendDistributor.distributeDividend(address) (#272-285):
External calls:
- address(shareholder).transfer(amount) (#279)
State variables written after the call(s):
- shareholderClaims[shareholder] = block.timestamp (#281)
- shares[shareholder].totalRealised = shares[shareholder].totalRealised.add(amount) (#282)
- shares[shareholder].totalExcluded = getCumulativeDividends(shares[shareholder].amount) (#283)
Reentrancy in DividendDistributor.process(uint256) (#241-265):
External calls:
- distributeDividend(shareholders[currentIndex]) (#257)
- address(shareholder).transfer(amount) (#279)
State variables written after the call(s):
- currentIndex ++ (#262)
Reentrancy in DividendDistributor.setShare(address,uint256) (#220-234):
External calls:
- distributeDividend(shareholder) (#222)
- address(shareholder).transfer(amount) (#279)
State variables written after the call(s):
- addShareholder(shareholder) (#226)
- shareholderIndexes[shareholder] = shareholders.length (#307)
- removeShareholder(shareholder) (#228)
- shareholderIndexes[shareholders[shareholders.length - 1]] = shareholderIndexes[shareholder] (#313)
- addShareholder(shareholder) (#226)
- shareholders.push(shareholder) (#308)
- removeShareholder(shareholder) (#228)
- shareholders[shareholderIndexes[shareholder]] = shareholders[shareholders.length - 1] (#312)
- shareholders.pop() (#314)
- shares[shareholder].amount = amount (#232)
- shares[shareholder].totalExcluded = getCumulativeDividends(shares[shareholder].amount) (#233)
- totalShares = totalShares.sub(shares[shareholder].amount).add(amount) (#231)
Apply the check-effects-interactions pattern.

Additional information: link

Variable IDEXRouter.addLiquidity(address,address,uint256,uint256,uint256,uint256,address,uint256).amountADesired (#120) is too similar to IDEXRouter.addLiquidity(address,address,uint256,uint256,uint256,uint256,address,uint256).amountBDesired (#121)
Prevent variables from having similar names.

Additional information: link

SOM.slitherConstructorVariables() (#318-761) uses literals with too many digits:
- DEAD = 0x000000000000000000000000000000000000dEaD (#322)
SOM.slitherConstructorVariables() (#318-761) uses literals with too many digits:
- ZERO = 0x0000000000000000000000000000000000000000 (#323)
SOM.slitherConstructorVariables() (#318-761) uses literals with too many digits:
- distributorGas = 500000 (#372)
Use: Ether suffix, Time suffix, or The scientific notation

Additional information: link

DividendDistributor.RWRD (#180) is never used in DividendDistributor (#168-316)
Remove unused state variables.

Additional information: link

DividendDistributor.dividendsPerShareAccuracyFactor (#192) should be constant
SOM.DEAD (#322) should be constant
SOM.ZERO (#323) should be constant
SOM._totalSupply (#329) should be constant
Add the constant attributes to state variables that never change.

Additional information: link

authorize(address) should be declared external:
- Auth.authorize(address) (#84-86)
unauthorize(address) should be declared external:
- Auth.unauthorize(address) (#88-90)
transferOwnership(address) should be declared external:
- Auth.transferOwnership(address) (#100-104)
tradingStatus(bool) should be declared external:
- SOM.tradingStatus(bool) (#563-565)
cooldownEnabled(bool,uint8) should be declared external:
- SOM.cooldownEnabled(bool,uint8) (#568-571)
enable_blacklist(bool) should be declared external:
- SOM.enable_blacklist(bool) (#634-636)
manage_blacklist(address[],bool) should be declared external:
- SOM.manage_blacklist(address[],bool) (#638-642)
Use the external attribute for functions never called from the contract.

Additional information: link

Token seems to be untradeable: there is no PancakeSwap trading pair and no trading volumes. Ignore for presale.

Number of Binance Smart Chain (BSC) token holders is low.

Unable to find website, listings and other project-related information

Young tokens have high risks of scam / price dump / death

Token has no active CoinGecko listing / rank

Token has no active CoinMarketCap listing / rank