FAT🐈COIN [FATCATCOIN] Token

Unable to find manual contract audit (e.g. Certik, PeckShield, Solidity...)

FATCATCOIN.swapBack() (#362-403) sends eth to arbitrary user
Dangerous calls:
- (MarketingSuccess) = address(marketingFeeReceiver).call{gas: 30000,value: amountBNBMarketing}() (#387)
- (devSuccess) = address(devFeeReceiver).call{gas: 30000,value: amountBNBdev}() (#389)
Ensure that an arbitrary user cannot withdraw unauthorized funds.

Additional information: link

Reentrancy in FATCATCOIN._transferFrom(address,address,uint256) (#286-315):
External calls:
- swapBack() (#304)
- router.swapExactTokensForETHSupportingFeeOnTransferTokens(amountToSwap,0,path,address(this),block.timestamp) (#373-379)
- (MarketingSuccess) = address(marketingFeeReceiver).call{gas: 30000,value: amountBNBMarketing}() (#387)
- (devSuccess) = address(devFeeReceiver).call{gas: 30000,value: amountBNBdev}() (#389)
- router.addLiquidityETH{value: amountBNBLiquidity}(address(this),amountToLiquify,0,0,marketingFeeReceiver,block.timestamp) (#393-400)
External calls sending eth:
- swapBack() (#304)
- (MarketingSuccess) = address(marketingFeeReceiver).call{gas: 30000,value: amountBNBMarketing}() (#387)
- (devSuccess) = address(devFeeReceiver).call{gas: 30000,value: amountBNBdev}() (#389)
- router.addLiquidityETH{value: amountBNBLiquidity}(address(this),amountToLiquify,0,0,marketingFeeReceiver,block.timestamp) (#393-400)
State variables written after the call(s):
- _balances[sender] = _balances[sender].sub(amount,Insufficient Balance) (#308)
- _balances[recipient] = _balances[recipient].add(amountReceived) (#311)
- amountReceived = takeFee(sender,recipient,amount) (#310)
- _balances[address(this)] = _balances[address(this)].add(feeAmount) (#341)
Apply the check-effects-interactions pattern.

Additional information: link

Combination 1: Reentrancy vulnerabilities + Functions that send Ether to arbitraty destination. Usual for scams. May be justified by some complex mechanics (e.g. rebase, reflections). DYOR & manual audit are advised.

Contract ticker (FAT🐈COIN) contains non-alphanumeric characters.
Not a direct threat, but may indicate unreliable intentions of developer. Non-alphanumeric chars (,.;!#*&") are extremely rare among low risk tokens.

FATCATCOIN.slitherConstructorVariables() (#182-499) performs a multiplication on the result of a division:
-swapThreshold = _totalSupply / 1000 * 1 (#223)
Consider ordering multiplication before division.

Additional information: link

FATCATCOIN.swapBack() (#362-403) ignores return value by router.addLiquidityETH{value: amountBNBLiquidity}(address(this),amountToLiquify,0,0,marketingFeeReceiver,block.timestamp) (#393-400)
Ensure that all the return values of the function calls are used.

Additional information: link

FATCATCOIN.setFees(uint256,uint256,uint256,uint256) (#432-439) should emit an event for:
- liquidityFee = _liquidityFee (#433)
- marketingFee = _marketingFee (#434)
- devFee = _devFee (#435)
- totalFee = _liquidityFee.add(_marketingFee).add(_devFee) (#436)
- feeDenominator = _feeDenominator (#437)
FATCATCOIN.setSellMultiplier(uint256) (#454-456) should emit an event for:
- _sellMultiplier = multiplier (#455)
FATCATCOIN.setTxLimit(uint256) (#462-465) should emit an event for:
- _maxTxAmount = amountBuy (#463)
Emit an event for critical parameter changes.

Additional information: link

Auth.transferOwnership(address).adr (#121) lacks a zero-check on :
- owner = adr (#122)
FATCATCOIN.setFeeReceiver(address,address)._marketingFeeReceiver (#457) lacks a zero-check on :
- marketingFeeReceiver = _marketingFeeReceiver (#458)
FATCATCOIN.setFeeReceiver(address,address)._devFeeReceiver (#457) lacks a zero-check on :
- devFeeReceiver = _devFeeReceiver (#459)
Check that the address is not zero.

Additional information: link

Reentrancy in FATCATCOIN._transferFrom(address,address,uint256) (#286-315):
External calls:
- swapBack() (#304)
- router.swapExactTokensForETHSupportingFeeOnTransferTokens(amountToSwap,0,path,address(this),block.timestamp) (#373-379)
- (MarketingSuccess) = address(marketingFeeReceiver).call{gas: 30000,value: amountBNBMarketing}() (#387)
- (devSuccess) = address(devFeeReceiver).call{gas: 30000,value: amountBNBdev}() (#389)
- router.addLiquidityETH{value: amountBNBLiquidity}(address(this),amountToLiquify,0,0,marketingFeeReceiver,block.timestamp) (#393-400)
External calls sending eth:
- swapBack() (#304)
- (MarketingSuccess) = address(marketingFeeReceiver).call{gas: 30000,value: amountBNBMarketing}() (#387)
- (devSuccess) = address(devFeeReceiver).call{gas: 30000,value: amountBNBdev}() (#389)
- router.addLiquidityETH{value: amountBNBLiquidity}(address(this),amountToLiquify,0,0,marketingFeeReceiver,block.timestamp) (#393-400)
State variables written after the call(s):
- launch() (#306)
- launchedAt = block.number (#423)
Reentrancy in FATCATCOIN.constructor() (#232-252):
External calls:
- pair = IDEXFactory(router.factory()).createPair(WBNB,address(this)) (#234)
State variables written after the call(s):
- _allowances[address(this)][address(router)] = type()(uint256).max (#235)
- _balances[_owner] = _totalSupply (#250)
- isFeeExempt[msg.sender] = true (#238)
- isTimelockExempt[msg.sender] = true (#245)
- isTimelockExempt[DEAD] = true (#246)
- isTimelockExempt[address(this)] = true (#247)
- isTxLimitExempt[msg.sender] = true (#240)
- isTxLimitExempt[address(this)] = true (#241)
- isTxLimitExempt[routerAddress] = true (#242)
Apply the check-effects-interactions pattern.

Additional information: link

Reentrancy in FATCATCOIN._transferFrom(address,address,uint256) (#286-315):
External calls:
- swapBack() (#304)
- router.swapExactTokensForETHSupportingFeeOnTransferTokens(amountToSwap,0,path,address(this),block.timestamp) (#373-379)
- (MarketingSuccess) = address(marketingFeeReceiver).call{gas: 30000,value: amountBNBMarketing}() (#387)
- (devSuccess) = address(devFeeReceiver).call{gas: 30000,value: amountBNBdev}() (#389)
- router.addLiquidityETH{value: amountBNBLiquidity}(address(this),amountToLiquify,0,0,marketingFeeReceiver,block.timestamp) (#393-400)
External calls sending eth:
- swapBack() (#304)
- (MarketingSuccess) = address(marketingFeeReceiver).call{gas: 30000,value: amountBNBMarketing}() (#387)
- (devSuccess) = address(devFeeReceiver).call{gas: 30000,value: amountBNBdev}() (#389)
- router.addLiquidityETH{value: amountBNBLiquidity}(address(this),amountToLiquify,0,0,marketingFeeReceiver,block.timestamp) (#393-400)
Event emitted after the call(s):
- Transfer(sender,address(this),feeAmount) (#342)
- amountReceived = takeFee(sender,recipient,amount) (#310)
- Transfer(sender,recipient,amountReceived) (#313)
Reentrancy in FATCATCOIN.constructor() (#232-252):
External calls:
- pair = IDEXFactory(router.factory()).createPair(WBNB,address(this)) (#234)
Event emitted after the call(s):
- Transfer(address(0),_owner,_totalSupply) (#251)
Reentrancy in FATCATCOIN.swapBack() (#362-403):
External calls:
- router.swapExactTokensForETHSupportingFeeOnTransferTokens(amountToSwap,0,path,address(this),block.timestamp) (#373-379)
- (MarketingSuccess) = address(marketingFeeReceiver).call{gas: 30000,value: amountBNBMarketing}() (#387)
- (devSuccess) = address(devFeeReceiver).call{gas: 30000,value: amountBNBdev}() (#389)
- router.addLiquidityETH{value: amountBNBLiquidity}(address(this),amountToLiquify,0,0,marketingFeeReceiver,block.timestamp) (#393-400)
External calls sending eth:
- (MarketingSuccess) = address(marketingFeeReceiver).call{gas: 30000,value: amountBNBMarketing}() (#387)
- (devSuccess) = address(devFeeReceiver).call{gas: 30000,value: amountBNBdev}() (#389)
- router.addLiquidityETH{value: amountBNBLiquidity}(address(this),amountToLiquify,0,0,marketingFeeReceiver,block.timestamp) (#393-400)
Event emitted after the call(s):
- AutoLiquify(amountBNBLiquidity,amountToLiquify) (#401)
Apply the check-effects-interactions pattern.

Additional information: link

FATCATCOIN._transferFrom(address,address,uint256) (#286-315) uses timestamp for comparisons
Dangerous comparisons:
- require(bool,string)(cooldownTimer[recipient] < block.timestamp,Please wait for 1min between two operations) (#301)
Avoid relying on block.timestamp.

Additional information: link

FATCATCOIN.buyTokens(uint256,address) (#405-416) is never used and should be removed
Remove unused functions.

Additional information: link

FATCATCOIN._maxTxAmount (#195) is set pre-construction with a non-constant function or state variable:
- (_totalSupply * 1) / 100
FATCATCOIN._maxWalletSize (#196) is set pre-construction with a non-constant function or state variable:
- (_totalSupply * 1) / 100
FATCATCOIN.swapThreshold (#223) is set pre-construction with a non-constant function or state variable:
- _totalSupply / 1000 * 1
Remove any initialization of state variables via non-constant state variables or function calls. If variables must be set upon contract deployment, locate initialization in the constructor instead.

Additional information: link

Pragma version^0.8.11 (#3) necessitates a version too recent to be trusted. Consider deploying with 0.6.12/0.7.6/0.8.7
solc-0.8.11 is not recommended for deployment
Deploy with any of the following Solidity versions: 0.5.16 - 0.5.17, 0.6.11 - 0.6.12, 0.7.5 - 0.7.6 Use a simple pragma version that allows any of these versions. Consider using the latest version of Solidity for testing.

Additional information: link

Low level call in FATCATCOIN.swapBack() (#362-403):
- (MarketingSuccess) = address(marketingFeeReceiver).call{gas: 30000,value: amountBNBMarketing}() (#387)
- (devSuccess) = address(devFeeReceiver).call{gas: 30000,value: amountBNBdev}() (#389)
Avoid low-level calls. Check the call success. If the call is meant for a contract, check for code existence

Additional information: link

Variable Auth._intAddr (#68) is not in mixedCase
Function IDEXRouter.WETH() (#136) is not in mixedCase
Parameter FATCATCOIN.tradingStatus(bool)._status (#348) is not in mixedCase
Parameter FATCATCOIN.setFees(uint256,uint256,uint256,uint256)._liquidityFee (#432) is not in mixedCase
Parameter FATCATCOIN.setFees(uint256,uint256,uint256,uint256)._marketingFee (#432) is not in mixedCase
Parameter FATCATCOIN.setFees(uint256,uint256,uint256,uint256)._devFee (#432) is not in mixedCase
Parameter FATCATCOIN.setFees(uint256,uint256,uint256,uint256)._feeDenominator (#432) is not in mixedCase
Parameter FATCATCOIN.cooldownEnabled(bool,uint8)._status (#441) is not in mixedCase
Parameter FATCATCOIN.cooldownEnabled(bool,uint8)._interval (#441) is not in mixedCase
Parameter FATCATCOIN.setFeeReceiver(address,address)._marketingFeeReceiver (#457) is not in mixedCase
Parameter FATCATCOIN.setFeeReceiver(address,address)._devFeeReceiver (#457) is not in mixedCase
Parameter FATCATCOIN.setSwapBackSettings(bool,uint256)._enabled (#466) is not in mixedCase
Parameter FATCATCOIN.setSwapBackSettings(bool,uint256)._amount (#466) is not in mixedCase
Parameter FATCATCOIN.blacklistAddress(address,bool)._address (#471) is not in mixedCase
Parameter FATCATCOIN.blacklistAddress(address,bool)._value (#471) is not in mixedCase
Parameter FATCATCOIN.transferForeignToken(address)._token (#479) is not in mixedCase
Variable FATCATCOIN.WBNB (#185) is not in mixedCase
Variable FATCATCOIN.DEAD (#186) is not in mixedCase
Variable FATCATCOIN.ZERO (#187) is not in mixedCase
Constant FATCATCOIN._name (#190) is not in UPPER_CASE_WITH_UNDERSCORES
Constant FATCATCOIN._symbol (#191) is not in UPPER_CASE_WITH_UNDERSCORES
Constant FATCATCOIN._decimals (#192) is not in UPPER_CASE_WITH_UNDERSCORES
Variable FATCATCOIN._totalSupply (#194) is not in mixedCase
Variable FATCATCOIN._maxTxAmount (#195) is not in mixedCase
Variable FATCATCOIN._maxWalletSize (#196) is not in mixedCase
Variable FATCATCOIN._balances (#198) is not in mixedCase
Variable FATCATCOIN._allowances (#199) is not in mixedCase
Variable FATCATCOIN._sellMultiplier (#211) is not in mixedCase
Follow the Solidity naming convention.

Additional information: link

Variable IDEXRouter.addLiquidity(address,address,uint256,uint256,uint256,uint256,address,uint256).amountADesired (#141) is too similar to IDEXRouter.addLiquidity(address,address,uint256,uint256,uint256,uint256,address,uint256).amountBDesired (#142)
Prevent variables from having similar names.

Additional information: link

FATCATCOIN.slitherConstructorVariables() (#182-499) uses literals with too many digits:
- DEAD = 0x000000000000000000000000000000000000dEaD (#186)
FATCATCOIN.slitherConstructorVariables() (#182-499) uses literals with too many digits:
- ZERO = 0x0000000000000000000000000000000000000000 (#187)
FATCATCOIN.slitherConstructorVariables() (#182-499) uses literals with too many digits:
- _totalSupply = 10000000000 * (10 ** _decimals) (#194)
Use: Ether suffix, Time suffix, or The scientific notation

Additional information: link

FATCATCOIN.DEAD (#186) should be constant
FATCATCOIN.WBNB (#185) should be constant
FATCATCOIN.ZERO (#187) should be constant
FATCATCOIN._totalSupply (#194) should be constant
FATCATCOIN.routerAddress (#188) should be constant
Add the constant attributes to state variables that never change.

Additional information: link

authorize(address) should be declared external:
- Auth.authorize(address) (#92-94)
unauthorize(address) should be declared external:
- Auth.unauthorize(address) (#100-102)
transferOwnership(address) should be declared external:
- Auth.transferOwnership(address) (#121-125)
tradingStatus(bool) should be declared external:
- FATCATCOIN.tradingStatus(bool) (#348-353)
cooldownEnabled(bool,uint8) should be declared external:
- FATCATCOIN.cooldownEnabled(bool,uint8) (#441-444)
blacklistAddress(address,bool) should be declared external:
- FATCATCOIN.blacklistAddress(address,bool) (#471-473)
transferForeignToken(address) should be declared external:
- FATCATCOIN.transferForeignToken(address) (#479-483)
isOverLiquified(uint256,uint256) should be declared external:
- FATCATCOIN.isOverLiquified(uint256,uint256) (#493-495)
Use the external attribute for functions never called from the contract.

Additional information: link

Average 30d PancakeSwap liquidity is less than $100. Token is either dead or inactive.

Average 30d PancakeSwap volume is less than $100. Token is either dead or inactive.

Number of Binance Smart Chain (BSC) token holders is less than 100. Token is either dead or inactive. Ignore for presale.

Contract has 4% buy tax and 24% sell tax.
Taxes are high (over 10%) but contract ownership is renounced.

Average 30d number of PancakeSwap swaps is low.

Token is deployed only at one blockchain

Token has only one trading pair

Unable to find website, listings and other project-related information

Young tokens have high risks of scam / price dump / death

Token has no active CoinGecko listing / rank

Token has no active CoinMarketCap listing / rank