DDC [DuxDoge] Token

Unable to find manual contract audit (e.g. Certik, PeckShield, Solidity...)

Reentrancy in DuxDoge._transfer(address,address,uint256) (#1017-1056):
External calls:
- swapAndLiquify(contractTokenBalance) (#1046)
- uniswapV2Router.addLiquidityETH{value: ethAmount}(address(this),tokenAmount,0,0,address(0),block.timestamp) (#1132-1139)
- uniswapV2Router.swapExactTokensForETHSupportingFeeOnTransferTokens(tokenAmount,0,path,address(this),block.timestamp) (#1118-1124)
External calls sending eth:
- swapAndLiquify(contractTokenBalance) (#1046)
- uniswapV2Router.addLiquidityETH{value: ethAmount}(address(this),tokenAmount,0,0,address(0),block.timestamp) (#1132-1139)
- recipient.transfer(amount) (#1145)
State variables written after the call(s):
- _tokenTransfer(from,to,amount,takeFee) (#1055)
- _rOwned[address(this)] = _rOwned[address(this)].add(rLiquidity) (#971)
- _rOwned[sender] = _rOwned[sender].sub(rAmount) (#1155)
- _rOwned[recipient] = _rOwned[recipient].add(rTransferAmount) (#1156)
- _tokenTransfer(from,to,amount,takeFee) (#1055)
- _rTotal = _rTotal.sub(rFee) (#926)
- _tokenTransfer(from,to,amount,takeFee) (#1055)
- _tOwned[address(this)] = _tOwned[address(this)].add(tLiquidity) (#973)
- _tOwned[sender] = _tOwned[sender].sub(tAmount) (#1160)
- _tOwned[recipient] = _tOwned[recipient].add(tTransferAmount) (#1164)
- _tOwned[sender] = _tOwned[sender].sub(tAmount) (#1168)
- _tOwned[recipient] = _tOwned[recipient].add(tTransferAmount) (#1169)
- _tokenTransfer(from,to,amount,takeFee) (#1055)
- _totalLiqFee = _prevTotalLiqFee (#990)
- _totalLiqFee = 0 (#985)
Apply the check-effects-interactions pattern.

Additional information: link

DuxDoge.swapAndLiquify(uint256) (#1075-1107) performs a multiplication on the result of a division:
-charityShare = newBalance_scope_1.div(walletFee).mul(_teamFee) (#1100)
Consider ordering multiplication before division.

Additional information: link

DuxDoge.addLiquidity(uint256,uint256) (#1127-1140) ignores return value by uniswapV2Router.addLiquidityETH{value: ethAmount}(address(this),tokenAmount,0,0,address(0),block.timestamp) (#1132-1139)
Ensure that all the return values of the function calls are used.

Additional information: link

DuxDoge._approve(address,address,uint256).owner (#1009) shadows:
- Ownable.owner() (#396-398) (function)
Rename the local variables that shadow another component.

Additional information: link

DuxDoge.prepareForLaunch(uint256,uint256,uint256,uint256,uint256,uint256) (#1189-1203) should emit an event for:
- _taxFee = newRewardFee (#1193)
- _liquidityFee = newLiquidityFee (#1194)
- _marketingFee = newMarketingfee (#1195)
- _devFee = newDevFee (#1196)
- _teamFee = newTeamFee (#1197)
- _totalLiqFee = newLiquidityFee.add(newMarketingfee).add(newDevFee).add(newTeamFee) (#1199)
- _prevTotalLiqFee = _totalLiqFee (#1200)
- _snipeBlockAmount = snipeBlockCount (#1202)
Emit an event for critical parameter changes.

Additional information: link

DuxDoge.setTeamWalletAddress(address).newAddress (#1005) lacks a zero-check on :
- teamWalletAddress = address(newAddress) (#1006)
Check that the address is not zero.

Additional information: link

Reentrancy in DuxDoge.transferFrom(address,address,uint256) (#787-791):
External calls:
- _transfer(sender,recipient,amount) (#788)
- uniswapV2Router.addLiquidityETH{value: ethAmount}(address(this),tokenAmount,0,0,address(0),block.timestamp) (#1132-1139)
- uniswapV2Router.swapExactTokensForETHSupportingFeeOnTransferTokens(tokenAmount,0,path,address(this),block.timestamp) (#1118-1124)
External calls sending eth:
- _transfer(sender,recipient,amount) (#788)
- uniswapV2Router.addLiquidityETH{value: ethAmount}(address(this),tokenAmount,0,0,address(0),block.timestamp) (#1132-1139)
- recipient.transfer(amount) (#1145)
State variables written after the call(s):
- _approve(sender,_msgSender(),_allowances[sender][_msgSender()].sub(amount,ERC20: transfer amount exceeds allowance)) (#789)
- _allowances[owner][spender] = amount (#1013)
Apply the check-effects-interactions pattern.

Additional information: link

Reentrancy in DuxDoge.transferFrom(address,address,uint256) (#787-791):
External calls:
- _transfer(sender,recipient,amount) (#788)
- uniswapV2Router.addLiquidityETH{value: ethAmount}(address(this),tokenAmount,0,0,address(0),block.timestamp) (#1132-1139)
- uniswapV2Router.swapExactTokensForETHSupportingFeeOnTransferTokens(tokenAmount,0,path,address(this),block.timestamp) (#1118-1124)
External calls sending eth:
- _transfer(sender,recipient,amount) (#788)
- uniswapV2Router.addLiquidityETH{value: ethAmount}(address(this),tokenAmount,0,0,address(0),block.timestamp) (#1132-1139)
- recipient.transfer(amount) (#1145)
Event emitted after the call(s):
- Approval(owner,spender,amount) (#1014)
- _approve(sender,_msgSender(),_allowances[sender][_msgSender()].sub(amount,ERC20: transfer amount exceeds allowance)) (#789)
Apply the check-effects-interactions pattern.

Additional information: link

Address._functionCallWithValue(address,bytes,uint256,string) (#359-380) uses assembly
- INLINE ASM (#372-375)
Do not use evm assembly.

Additional information: link

SafeMath.mod(uint256,uint256,string) (#227-230) is never used and should be removed
Remove unused functions.

Additional information: link

DuxDoge._prevTotalLiqFee (#684) is set pre-construction with a non-constant function or state variable:
- _totalLiqFee
Remove any initialization of state variables via non-constant state variables or function calls. If variables must be set upon contract deployment, locate initialization in the constructor instead.

Additional information: link

solc-0.8.4 is not recommended for deployment
Deploy with any of the following Solidity versions: 0.5.16 - 0.5.17, 0.6.11 - 0.6.12, 0.7.5 - 0.7.6 Use a simple pragma version that allows any of these versions. Consider using the latest version of Solidity for testing.

Additional information: link

Low level call in Address._functionCallWithValue(address,bytes,uint256,string) (#359-380):
- (success,returndata) = target.call{value: weiValue}(data) (#363)
Avoid low-level calls. Check the call success. If the call is meant for a contract, check for code existence

Additional information: link

Variable DuxDoge._numTokensSellToAddToLiquidity (#706) is not in mixedCase
Follow the Solidity naming convention.

Additional information: link

Redundant expression "this (#240)" inContext (#233-243)
Remove redundant statements if they congest code but offer no value.

Additional information: link

Reentrancy in DuxDoge.transferFrom(address,address,uint256) (#787-791):
External calls:
- _transfer(sender,recipient,amount) (#788)
- recipient.transfer(amount) (#1145)
External calls sending eth:
- _transfer(sender,recipient,amount) (#788)
- uniswapV2Router.addLiquidityETH{value: ethAmount}(address(this),tokenAmount,0,0,address(0),block.timestamp) (#1132-1139)
- recipient.transfer(amount) (#1145)
State variables written after the call(s):
- _approve(sender,_msgSender(),_allowances[sender][_msgSender()].sub(amount,ERC20: transfer amount exceeds allowance)) (#789)
- _allowances[owner][spender] = amount (#1013)
Event emitted after the call(s):
- Approval(owner,spender,amount) (#1014)
- _approve(sender,_msgSender(),_allowances[sender][_msgSender()].sub(amount,ERC20: transfer amount exceeds allowance)) (#789)
Apply the check-effects-interactions pattern.

Additional information: link

Variable DuxDoge._getRValues(uint256,uint256,uint256,uint256).rTransferAmount (#947) is too similar to DuxDoge._getValues(uint256).tTransferAmount (#931)
Prevent variables from having similar names.

Additional information: link

DuxDoge._tTotal (#671) should be constant
Add the constant attributes to state variables that never change.

Additional information: link

isExcludedFromFee(address) should be declared external:
- DuxDoge.isExcludedFromFee(address) (#993-995)
Use the external attribute for functions never called from the contract.

Additional information: link

Average PancakeSwap trading volume, liqudity, number of swaps are extremely low. Token seems to be dead.

Token is deployed only at one blockchain

Token has only one trading pair

Unable to find PancakeSwap trading pair to compute liquidity.

Unable to find PancakeSwap trading pair to compute volume.

Unable to find PancakeSwap trading pair to compute number of swaps.

BscScan page for the token does not contain additional info: website, socials, description, etc.

Additional information: link

Token was delisted from CoinGecko

Additional information: link

Token was delisted (assigned to inactive / untracked listing) from CoinMarketCap

Additional information: link

Unable to find token contract audit

Unable to verify token contract address on the website

Unable to find audit link on the website

Unable to find token on CoinHunt

Additional information: link

Unable to find code repository for the project

Young tokens have high risks of scam / price dump / death

Token has no active CoinGecko listing / rank

Token has no active CoinMarketCap listing / rank

Young tokens have high risks of price dump / death