BITCOIN INTERNATIONAL is a non-inflationary Stake , Farm ,DeFi and NFT ecosystem aiming to provide yield generating investments strategies to long-term BTCI holders
BTCI.addLiquidity(uint256,uint256) (#1089-1102) sends eth to arbitrary user
Dangerous calls:
- uniswapV2Router.addLiquidityETH{value: ethAmount}(address(this),tokenAmount,0,0,owner(),block.timestamp) (#1094-1101)
Ensure that an arbitrary user cannot withdraw unauthorized funds.
Additional information: link
Reentrancy in BTCI._transfer(address,address,uint256) (#1002-1046):
External calls:
- swapAndLiquify(contractTokenBalance) (#1033)
- uniswapV2Router.addLiquidityETH{value: ethAmount}(address(this),tokenAmount,0,0,owner(),block.timestamp) (#1094-1101)
- uniswapV2Router.swapExactTokensForETHSupportingFeeOnTransferTokens(tokenAmount,0,path,address(this),block.timestamp) (#1080-1086)
External calls sending eth:
- swapAndLiquify(contractTokenBalance) (#1033)
- uniswapV2Router.addLiquidityETH{value: ethAmount}(address(this),tokenAmount,0,0,owner(),block.timestamp) (#1094-1101)
State variables written after the call(s):
- _tokenTransfer(from,to,amount,takeFee) (#1045)
- _rOwned[address(this)] = _rOwned[address(this)].add(rLiquidity) (#953)
- _rOwned[sender] = _rOwned[sender].sub(rAmount) (#1136)
- _rOwned[sender] = _rOwned[sender].sub(rAmount) (#1127)
- _rOwned[recipient] = _rOwned[recipient].add(rTransferAmount) (#1128)
- _rOwned[sender] = _rOwned[sender].sub(rAmount) (#867)
- _rOwned[sender] = _rOwned[sender].sub(rAmount) (#1147)
- _rOwned[recipient] = _rOwned[recipient].add(rTransferAmount) (#1138)
- _rOwned[recipient] = _rOwned[recipient].add(rTransferAmount) (#1148)
- _rOwned[recipient] = _rOwned[recipient].add(rTransferAmount) (#869)
- _tokenTransfer(from,to,amount,takeFee) (#1045)
- _rTotal = _rTotal.sub(rFee) (#908)
- _tokenTransfer(from,to,amount,takeFee) (#1045)
- _tOwned[address(this)] = _tOwned[address(this)].add(tLiquidity) (#955)
- _tOwned[sender] = _tOwned[sender].sub(tAmount) (#866)
- _tOwned[sender] = _tOwned[sender].sub(tAmount) (#1146)
- _tOwned[recipient] = _tOwned[recipient].add(tTransferAmount) (#1137)
- _tOwned[recipient] = _tOwned[recipient].add(tTransferAmount) (#868)
Apply the check-effects-interactions pattern.
Additional information: link
Unable to find manual contract audit (e.g. Certik, PeckShield, Solidity...)
Combination 1: Reentrancy vulnerabilities + Functions that send Ether to arbitraty destination. Usual for scams. May be justified by some complex mechanics (e.g. rebase, reflections). DYOR & manual audit are advised.
BTCI.addLiquidity(uint256,uint256) (#1089-1102) ignores return value by uniswapV2Router.addLiquidityETH{value: ethAmount}(address(this),tokenAmount,0,0,owner(),block.timestamp) (#1094-1101)
Ensure that all the return values of the function calls are used.
Additional information: link
BTCI.allowance(address,address).owner (#783) shadows:
- Ownable.owner() (#404-406) (function)
BTCI._approve(address,address,uint256).owner (#994) shadows:
- Ownable.owner() (#404-406) (function)
Rename the local variables that shadow another component.
Additional information: link
BTCI.setTaxFeePercent(uint256) (#883-885) should emit an event for:
- _taxFee = taxFee (#884)
BTCI.setLiquidityFeePercent(uint256) (#887-889) should emit an event for:
- _liquidityFee = liquidityFee (#888)
BTCI.setNumTokensSellToAddToLiquidity(uint256) (#891-893) should emit an event for:
- numTokensSellToAddToLiquidity = swapNumber * 10 ** _decimals (#892)
BTCI.setMaxTxPercent(uint256) (#895-897) should emit an event for:
- _maxTxAmount = maxTxPercent * 10 ** _decimals (#896)
Emit an event for critical parameter changes.
Additional information: link
BTCI.constructor(string,string,uint256,uint256,uint256,uint256,uint256,uint256,address,address).tokenOwner (#724) lacks a zero-check on :
- _owner = tokenOwner (#752)
Check that the address is not zero.
Additional information: link
Reentrancy in BTCI._transfer(address,address,uint256) (#1002-1046):
External calls:
- swapAndLiquify(contractTokenBalance) (#1033)
- uniswapV2Router.addLiquidityETH{value: ethAmount}(address(this),tokenAmount,0,0,owner(),block.timestamp) (#1094-1101)
- uniswapV2Router.swapExactTokensForETHSupportingFeeOnTransferTokens(tokenAmount,0,path,address(this),block.timestamp) (#1080-1086)
External calls sending eth:
- swapAndLiquify(contractTokenBalance) (#1033)
- uniswapV2Router.addLiquidityETH{value: ethAmount}(address(this),tokenAmount,0,0,owner(),block.timestamp) (#1094-1101)
State variables written after the call(s):
- _tokenTransfer(from,to,amount,takeFee) (#1045)
- _liquidityFee = _previousLiquidityFee (#987)
- _liquidityFee = 0 (#982)
- _tokenTransfer(from,to,amount,takeFee) (#1045)
- _previousLiquidityFee = _liquidityFee (#979)
- _tokenTransfer(from,to,amount,takeFee) (#1045)
- _previousTaxFee = _taxFee (#978)
- _tokenTransfer(from,to,amount,takeFee) (#1045)
- _tFeeTotal = _tFeeTotal.add(tFee) (#909)
- _tokenTransfer(from,to,amount,takeFee) (#1045)
- _taxFee = _previousTaxFee (#986)
- _taxFee = 0 (#981)
Reentrancy in BTCI.constructor(string,string,uint256,uint256,uint256,uint256,uint256,uint256,address,address) (#724-754):
External calls:
- uniswapV2Pair = IUniswapV2Factory(_uniswapV2Router.factory()).createPair(address(this),_uniswapV2Router.WETH()) (#742-743)
State variables written after the call(s):
- _isExcludedFromFee[tokenOwner] = true (#749)
- _isExcludedFromFee[address(this)] = true (#750)
- _owner = tokenOwner (#752)
- uniswapV2Router = _uniswapV2Router (#746)
Reentrancy in BTCI.swapAndLiquify(uint256) (#1048-1069):
External calls:
- swapTokensForEth(half) (#1060)
- uniswapV2Router.swapExactTokensForETHSupportingFeeOnTransferTokens(tokenAmount,0,path,address(this),block.timestamp) (#1080-1086)
- addLiquidity(otherHalf,newBalance) (#1066)
- uniswapV2Router.addLiquidityETH{value: ethAmount}(address(this),tokenAmount,0,0,owner(),block.timestamp) (#1094-1101)
External calls sending eth:
- addLiquidity(otherHalf,newBalance) (#1066)
- uniswapV2Router.addLiquidityETH{value: ethAmount}(address(this),tokenAmount,0,0,owner(),block.timestamp) (#1094-1101)
State variables written after the call(s):
- addLiquidity(otherHalf,newBalance) (#1066)
- _allowances[owner][spender] = amount (#998)
Reentrancy in BTCI.transferFrom(address,address,uint256) (#792-796):
External calls:
- _transfer(sender,recipient,amount) (#793)
- uniswapV2Router.addLiquidityETH{value: ethAmount}(address(this),tokenAmount,0,0,owner(),block.timestamp) (#1094-1101)
- uniswapV2Router.swapExactTokensForETHSupportingFeeOnTransferTokens(tokenAmount,0,path,address(this),block.timestamp) (#1080-1086)
External calls sending eth:
- _transfer(sender,recipient,amount) (#793)
- uniswapV2Router.addLiquidityETH{value: ethAmount}(address(this),tokenAmount,0,0,owner(),block.timestamp) (#1094-1101)
State variables written after the call(s):
- _approve(sender,_msgSender(),_allowances[sender][_msgSender()].sub(amount,ERC20: transfer amount exceeds allowance)) (#794)
- _allowances[owner][spender] = amount (#998)
Apply the check-effects-interactions pattern.
Additional information: link
Reentrancy in BTCI._transfer(address,address,uint256) (#1002-1046):
External calls:
- swapAndLiquify(contractTokenBalance) (#1033)
- uniswapV2Router.addLiquidityETH{value: ethAmount}(address(this),tokenAmount,0,0,owner(),block.timestamp) (#1094-1101)
- uniswapV2Router.swapExactTokensForETHSupportingFeeOnTransferTokens(tokenAmount,0,path,address(this),block.timestamp) (#1080-1086)
External calls sending eth:
- swapAndLiquify(contractTokenBalance) (#1033)
- uniswapV2Router.addLiquidityETH{value: ethAmount}(address(this),tokenAmount,0,0,owner(),block.timestamp) (#1094-1101)
Event emitted after the call(s):
- Transfer(sender,recipient,tTransferAmount) (#1131)
- _tokenTransfer(from,to,amount,takeFee) (#1045)
- Transfer(sender,recipient,tTransferAmount) (#1151)
- _tokenTransfer(from,to,amount,takeFee) (#1045)
- Transfer(sender,recipient,tTransferAmount) (#1141)
- _tokenTransfer(from,to,amount,takeFee) (#1045)
- Transfer(sender,recipient,tTransferAmount) (#872)
- _tokenTransfer(from,to,amount,takeFee) (#1045)
Reentrancy in BTCI.constructor(string,string,uint256,uint256,uint256,uint256,uint256,uint256,address,address) (#724-754):
External calls:
- uniswapV2Pair = IUniswapV2Factory(_uniswapV2Router.factory()).createPair(address(this),_uniswapV2Router.WETH()) (#742-743)
Event emitted after the call(s):
- Transfer(address(0),tokenOwner,_tTotal) (#753)
Reentrancy in BTCI.swapAndLiquify(uint256) (#1048-1069):
External calls:
- swapTokensForEth(half) (#1060)
- uniswapV2Router.swapExactTokensForETHSupportingFeeOnTransferTokens(tokenAmount,0,path,address(this),block.timestamp) (#1080-1086)
- addLiquidity(otherHalf,newBalance) (#1066)
- uniswapV2Router.addLiquidityETH{value: ethAmount}(address(this),tokenAmount,0,0,owner(),block.timestamp) (#1094-1101)
External calls sending eth:
- addLiquidity(otherHalf,newBalance) (#1066)
- uniswapV2Router.addLiquidityETH{value: ethAmount}(address(this),tokenAmount,0,0,owner(),block.timestamp) (#1094-1101)
Event emitted after the call(s):
- Approval(owner,spender,amount) (#999)
- addLiquidity(otherHalf,newBalance) (#1066)
- SwapAndLiquify(half,newBalance,otherHalf) (#1068)
Reentrancy in BTCI.transferFrom(address,address,uint256) (#792-796):
External calls:
- _transfer(sender,recipient,amount) (#793)
- uniswapV2Router.addLiquidityETH{value: ethAmount}(address(this),tokenAmount,0,0,owner(),block.timestamp) (#1094-1101)
- uniswapV2Router.swapExactTokensForETHSupportingFeeOnTransferTokens(tokenAmount,0,path,address(this),block.timestamp) (#1080-1086)
External calls sending eth:
- _transfer(sender,recipient,amount) (#793)
- uniswapV2Router.addLiquidityETH{value: ethAmount}(address(this),tokenAmount,0,0,owner(),block.timestamp) (#1094-1101)
Event emitted after the call(s):
- Approval(owner,spender,amount) (#999)
- _approve(sender,_msgSender(),_allowances[sender][_msgSender()].sub(amount,ERC20: transfer amount exceeds allowance)) (#794)
Apply the check-effects-interactions pattern.
Additional information: link
Ownable.unlock() (#451-456) uses timestamp for comparisons
Dangerous comparisons:
- require(bool,string)(now > _lockTime,Contract is locked until 7 days) (#453)
Avoid relying on block.timestamp.
Additional information: link
Address.isContract(address) (#264-273) uses assembly
- INLINE ASM (#271)
Address._functionCallWithValue(address,bytes,uint256,string) (#357-378) uses assembly
- INLINE ASM (#370-373)
Do not use evm assembly.
Additional information: link
BTCI.includeInReward(address) (#852-863) has costly operations inside a loop:
- _excluded.pop() (#859)
Use a local variable to hold the loop computation result.
Additional information: link
Address._functionCallWithValue(address,bytes,uint256,string) (#357-378) is never used and should be removed
Address.functionCall(address,bytes) (#317-319) is never used and should be removed
Address.functionCall(address,bytes,string) (#327-329) is never used and should be removed
Address.functionCallWithValue(address,bytes,uint256) (#342-344) is never used and should be removed
Address.functionCallWithValue(address,bytes,uint256,string) (#352-355) is never used and should be removed
Address.isContract(address) (#264-273) is never used and should be removed
Address.sendValue(address,uint256) (#291-297) is never used and should be removed
Context._msgData() (#236-239) is never used and should be removed
SafeMath.mod(uint256,uint256) (#209-211) is never used and should be removed
SafeMath.mod(uint256,uint256,string) (#225-228) is never used and should be removed
Remove unused functions.
Additional information: link
Low level call in Address.sendValue(address,uint256) (#291-297):
- (success) = recipient.call{value: amount}() (#295)
Low level call in Address._functionCallWithValue(address,bytes,uint256,string) (#357-378):
- (success,returndata) = target.call{value: weiValue}(data) (#361)
Avoid low-level calls. Check the call success. If the call is meant for a contract, check for code existence
Additional information: link
Variable Ownable._owner (#394) is not in mixedCase
Function IUniswapV2Pair.DOMAIN_SEPARATOR() (#495) is not in mixedCase
Function IUniswapV2Pair.PERMIT_TYPEHASH() (#496) is not in mixedCase
Function IUniswapV2Pair.MINIMUM_LIQUIDITY() (#513) is not in mixedCase
Function IUniswapV2Router01.WETH() (#535) is not in mixedCase
Parameter BTCI.setSwapAndLiquifyEnabled(bool)._enabled (#899) is not in mixedCase
Parameter BTCI.calculateTaxFee(uint256)._amount (#963) is not in mixedCase
Parameter BTCI.calculateLiquidityFee(uint256)._amount (#969) is not in mixedCase
Variable BTCI._taxFee (#695) is not in mixedCase
Variable BTCI._liquidityFee (#698) is not in mixedCase
Variable BTCI._maxTxAmount (#707) is not in mixedCase
Follow the Solidity naming convention.
Additional information: link
Redundant expression "this (#237)" inContext (#231-240)
Remove redundant statements if they congest code but offer no value.
Additional information: link
Variable IUniswapV2Router01.addLiquidity(address,address,uint256,uint256,uint256,uint256,address,uint256).amountADesired (#540) is too similar to IUniswapV2Router01.addLiquidity(address,address,uint256,uint256,uint256,uint256,address,uint256).amountBDesired (#541)
Variable BTCI.reflectionFromToken(uint256,bool).rTransferAmount (#831) is too similar to BTCI._transferFromExcluded(address,address,uint256).tTransferAmount (#1145)
Variable BTCI.reflectionFromToken(uint256,bool).rTransferAmount (#831) is too similar to BTCI._transferToExcluded(address,address,uint256).tTransferAmount (#1135)
Variable BTCI._transferBothExcluded(address,address,uint256).rTransferAmount (#865) is too similar to BTCI._getValues(uint256).tTransferAmount (#913)
Variable BTCI._getValues(uint256).rTransferAmount (#914) is too similar to BTCI._transferToExcluded(address,address,uint256).tTransferAmount (#1135)
Variable BTCI._transferBothExcluded(address,address,uint256).rTransferAmount (#865) is too similar to BTCI._getTValues(uint256).tTransferAmount (#921)
Variable BTCI._transferFromExcluded(address,address,uint256).rTransferAmount (#1145) is too similar to BTCI._getValues(uint256).tTransferAmount (#913)
Variable BTCI._transferStandard(address,address,uint256).rTransferAmount (#1126) is too similar to BTCI._transferFromExcluded(address,address,uint256).tTransferAmount (#1145)
Variable BTCI._transferStandard(address,address,uint256).rTransferAmount (#1126) is too similar to BTCI._transferToExcluded(address,address,uint256).tTransferAmount (#1135)
Variable BTCI._transferFromExcluded(address,address,uint256).rTransferAmount (#1145) is too similar to BTCI._getTValues(uint256).tTransferAmount (#921)
Variable BTCI._transferBothExcluded(address,address,uint256).rTransferAmount (#865) is too similar to BTCI._transferBothExcluded(address,address,uint256).tTransferAmount (#865)
Variable BTCI.reflectionFromToken(uint256,bool).rTransferAmount (#831) is too similar to BTCI._getValues(uint256).tTransferAmount (#913)
Variable BTCI._transferFromExcluded(address,address,uint256).rTransferAmount (#1145) is too similar to BTCI._transferBothExcluded(address,address,uint256).tTransferAmount (#865)
Variable BTCI.reflectionFromToken(uint256,bool).rTransferAmount (#831) is too similar to BTCI._getTValues(uint256).tTransferAmount (#921)
Variable BTCI._transferStandard(address,address,uint256).rTransferAmount (#1126) is too similar to BTCI._getValues(uint256).tTransferAmount (#913)
Variable BTCI._getRValues(uint256,uint256,uint256,uint256).rTransferAmount (#929) is too similar to BTCI._transferToExcluded(address,address,uint256).tTransferAmount (#1135)
Variable BTCI.reflectionFromToken(uint256,bool).rTransferAmount (#831) is too similar to BTCI._transferBothExcluded(address,address,uint256).tTransferAmount (#865)
Variable BTCI._transferStandard(address,address,uint256).rTransferAmount (#1126) is too similar to BTCI._getTValues(uint256).tTransferAmount (#921)
Variable BTCI._transferStandard(address,address,uint256).rTransferAmount (#1126) is too similar to BTCI._transferStandard(address,address,uint256).tTransferAmount (#1126)
Variable BTCI._transferStandard(address,address,uint256).rTransferAmount (#1126) is too similar to BTCI._transferBothExcluded(address,address,uint256).tTransferAmount (#865)
Variable BTCI._transferBothExcluded(address,address,uint256).rTransferAmount (#865) is too similar to BTCI._transferToExcluded(address,address,uint256).tTransferAmount (#1135)
Variable BTCI._transferToExcluded(address,address,uint256).rTransferAmount (#1135) is too similar to BTCI._transferToExcluded(address,address,uint256).tTransferAmount (#1135)
Variable BTCI._transferFromExcluded(address,address,uint256).rTransferAmount (#1145) is too similar to BTCI._transferFromExcluded(address,address,uint256).tTransferAmount (#1145)
Variable BTCI._transferFromExcluded(address,address,uint256).rTransferAmount (#1145) is too similar to BTCI._transferToExcluded(address,address,uint256).tTransferAmount (#1135)
Variable BTCI._getValues(uint256).rTransferAmount (#914) is too similar to BTCI._getValues(uint256).tTransferAmount (#913)
Variable BTCI._transferToExcluded(address,address,uint256).rTransferAmount (#1135) is too similar to BTCI._transferFromExcluded(address,address,uint256).tTransferAmount (#1145)
Variable BTCI._transferBothExcluded(address,address,uint256).rTransferAmount (#865) is too similar to BTCI._transferStandard(address,address,uint256).tTransferAmount (#1126)
Variable BTCI._transferToExcluded(address,address,uint256).rTransferAmount (#1135) is too similar to BTCI._transferBothExcluded(address,address,uint256).tTransferAmount (#865)
Variable BTCI._transferToExcluded(address,address,uint256).rTransferAmount (#1135) is too similar to BTCI._getTValues(uint256).tTransferAmount (#921)
Variable BTCI._transferToExcluded(address,address,uint256).rTransferAmount (#1135) is too similar to BTCI._getValues(uint256).tTransferAmount (#913)
Variable BTCI._getRValues(uint256,uint256,uint256,uint256).rTransferAmount (#929) is too similar to BTCI._transferStandard(address,address,uint256).tTransferAmount (#1126)
Variable BTCI.reflectionFromToken(uint256,bool).rTransferAmount (#831) is too similar to BTCI._transferStandard(address,address,uint256).tTransferAmount (#1126)
Variable BTCI._getValues(uint256).rTransferAmount (#914) is too similar to BTCI._transferStandard(address,address,uint256).tTransferAmount (#1126)
Variable BTCI._transferFromExcluded(address,address,uint256).rTransferAmount (#1145) is too similar to BTCI._transferStandard(address,address,uint256).tTransferAmount (#1126)
Variable BTCI._transferToExcluded(address,address,uint256).rTransferAmount (#1135) is too similar to BTCI._transferStandard(address,address,uint256).tTransferAmount (#1126)
Variable BTCI._transferBothExcluded(address,address,uint256).rTransferAmount (#865) is too similar to BTCI._transferFromExcluded(address,address,uint256).tTransferAmount (#1145)
Variable BTCI._getRValues(uint256,uint256,uint256,uint256).rTransferAmount (#929) is too similar to BTCI._transferFromExcluded(address,address,uint256).tTransferAmount (#1145)
Variable BTCI._getRValues(uint256,uint256,uint256,uint256).rTransferAmount (#929) is too similar to BTCI._transferBothExcluded(address,address,uint256).tTransferAmount (#865)
Variable BTCI._getRValues(uint256,uint256,uint256,uint256).rTransferAmount (#929) is too similar to BTCI._getValues(uint256).tTransferAmount (#913)
Variable BTCI._getRValues(uint256,uint256,uint256,uint256).rTransferAmount (#929) is too similar to BTCI._getTValues(uint256).tTransferAmount (#921)
Variable BTCI._getValues(uint256).rTransferAmount (#914) is too similar to BTCI._transferFromExcluded(address,address,uint256).tTransferAmount (#1145)
Variable BTCI._getValues(uint256).rTransferAmount (#914) is too similar to BTCI._transferBothExcluded(address,address,uint256).tTransferAmount (#865)
Variable BTCI._getValues(uint256).rTransferAmount (#914) is too similar to BTCI._getTValues(uint256).tTransferAmount (#921)
Prevent variables from having similar names.
Additional information: link
renounceOwnership() should be declared external:
- Ownable.renounceOwnership() (#423-426)
transferOwnership(address) should be declared external:
- Ownable.transferOwnership(address) (#432-436)
geUnlockTime() should be declared external:
- Ownable.geUnlockTime() (#438-440)
lock(uint256) should be declared external:
- Ownable.lock(uint256) (#443-448)
unlock() should be declared external:
- Ownable.unlock() (#451-456)
name() should be declared external:
- BTCI.name() (#757-759)
symbol() should be declared external:
- BTCI.symbol() (#761-763)
decimals() should be declared external:
- BTCI.decimals() (#765-767)
totalSupply() should be declared external:
- BTCI.totalSupply() (#769-771)
transfer(address,uint256) should be declared external:
- BTCI.transfer(address,uint256) (#778-781)
allowance(address,address) should be declared external:
- BTCI.allowance(address,address) (#783-785)
approve(address,uint256) should be declared external:
- BTCI.approve(address,uint256) (#787-790)
transferFrom(address,address,uint256) should be declared external:
- BTCI.transferFrom(address,address,uint256) (#792-796)
increaseAllowance(address,uint256) should be declared external:
- BTCI.increaseAllowance(address,uint256) (#798-801)
decreaseAllowance(address,uint256) should be declared external:
- BTCI.decreaseAllowance(address,uint256) (#803-806)
isExcludedFromReward(address) should be declared external:
- BTCI.isExcludedFromReward(address) (#808-810)
totalFees() should be declared external:
- BTCI.totalFees() (#812-814)
deliver(uint256) should be declared external:
- BTCI.deliver(uint256) (#816-823)
reflectionFromToken(uint256,bool) should be declared external:
- BTCI.reflectionFromToken(uint256,bool) (#825-834)
excludeFromReward(address) should be declared external:
- BTCI.excludeFromReward(address) (#842-850)
excludeFromFee(address) should be declared external:
- BTCI.excludeFromFee(address) (#875-877)
includeInFee(address) should be declared external:
- BTCI.includeInFee(address) (#879-881)
setNumTokensSellToAddToLiquidity(uint256) should be declared external:
- BTCI.setNumTokensSellToAddToLiquidity(uint256) (#891-893)
setMaxTxPercent(uint256) should be declared external:
- BTCI.setMaxTxPercent(uint256) (#895-897)
setSwapAndLiquifyEnabled(bool) should be declared external:
- BTCI.setSwapAndLiquifyEnabled(bool) (#899-902)
claimTokens() should be declared external:
- BTCI.claimTokens() (#959-961)
isExcludedFromFee(address) should be declared external:
- BTCI.isExcludedFromFee(address) (#990-992)
Use the external attribute for functions never called from the contract.
Additional information: link
Average 30d PancakeSwap liquidity is low.
Average 30d PancakeSwap volume is low.
Average 30d number of PancakeSwap swaps is low.
Average PancakeSwap trading volume, liqudity, number of swaps are low. Token seems to be inactive.
Token is deployed only at one blockchain
Contract has 10% buy tax and 9% sell tax.
Taxes are low and contract ownership is renounced.
Unable to find token contract audit
Unable to find audit link on the website
Unable to find whitepaper link on the website
Unable to find Telegram link on the website
Unable to find Twitter link on the website
Unable to find token on CoinHunt
Additional information: link
Young tokens have high risks of scam / price dump / death
Young tokens have high risks of price dump / death
Young tokens have high risks of price dump / death
Token has relatively low CoinGecko rank
Token has relatively low CoinMarketCap rank
Last post in Twitter was more than 180 days ago
Unable to find Youtube account
Unable to find Discord account