BMND [Baby Mind] Token

Unable to find manual contract audit (e.g. Certik, PeckShield, Solidity...)

BabyMind.swapBack() (#587-633) sends eth to arbitrary user
Dangerous calls:
- (tmpSuccess) = address(marketingFeeReceiver).call{gas: 30000,value: amountBNBMarketing}() (#616)
- (tmpSuccess,None) = address(devFeeReceiver).call{gas: 30000,value: amountBNBDev}() (#617)
Ensure that an arbitrary user cannot withdraw unauthorized funds.

Additional information: link

Too many vulnerabilities (Unchecked transfer, Reentrancy vulnerability, etc.). High risk of a scam. DYOR & manual audit are advised.

Reentrancy in BabyMind._transferFrom(address,address,uint256) (#471-519):
External calls:
- swapBack() (#498)
- router.swapExactTokensForETHSupportingFeeOnTransferTokens(amountToSwap,0,path,address(this),block.timestamp) (#598-604)
- distributor.deposit{value: amountBNBReflection}() (#615)
- (tmpSuccess) = address(marketingFeeReceiver).call{gas: 30000,value: amountBNBMarketing}() (#616)
- (tmpSuccess,None) = address(devFeeReceiver).call{gas: 30000,value: amountBNBDev}() (#617)
- router.addLiquidityETH{value: amountBNBLiquidity}(address(this),amountToLiquify,0,0,autoLiquidityReceiver,block.timestamp) (#623-630)
External calls sending eth:
- swapBack() (#498)
- distributor.deposit{value: amountBNBReflection}() (#615)
- (tmpSuccess) = address(marketingFeeReceiver).call{gas: 30000,value: amountBNBMarketing}() (#616)
- (tmpSuccess,None) = address(devFeeReceiver).call{gas: 30000,value: amountBNBDev}() (#617)
- router.addLiquidityETH{value: amountBNBLiquidity}(address(this),amountToLiquify,0,0,autoLiquidityReceiver,block.timestamp) (#623-630)
State variables written after the call(s):
- _balances[sender] = _balances[sender].sub(amount,Insufficient Balance) (#501)
- _balances[recipient] = _balances[recipient].add(amountReceived) (#504)
- amountReceived = takeFee(sender,amount,(recipient == pair)) (#503)
- _balances[address(this)] = _balances[address(this)].add(contractTokens) (#544)
- _balances[burnFeeReceiver] = _balances[burnFeeReceiver].add(burnTokens) (#545)
Apply the check-effects-interactions pattern.

Additional information: link

DividendDistributor.distributeDividend(address) (#293-304) ignores return value by RWRD.transfer(shareholder,amount) (#299)
Use SafeERC20, or ensure that the transfer/transferFrom return value is checked.

Additional information: link

Combination 1: Reentrancy vulnerabilities + Functions that send Ether to arbitraty destination. Usual for scams. May be justified by some complex mechanics (e.g. rebase, reflections). DYOR & manual audit are advised.

Combination 2: Unchecked transfer + Functions that send Ether to arbitraty destination. Usual for scams. May be justified by some complex mechanics (e.g. rebase, reflections). DYOR & manual audit are advised.

Combination 3: Reentrancy vulnerabilities + Unchecked transfer vulnerability. Usual for scams. May be justified by some complex mechanics (e.g. rebase, reflections). DYOR & manual audit are advised.

BabyMind.swapBack().tmpSuccess (#616) is written in both
(tmpSuccess) = address(marketingFeeReceiver).call{gas: 30000,value: amountBNBMarketing}() (#616)
(tmpSuccess,None) = address(devFeeReceiver).call{gas: 30000,value: amountBNBDev}() (#617)
BabyMind.swapBack().tmpSuccess (#616) is written in both
(tmpSuccess,None) = address(devFeeReceiver).call{gas: 30000,value: amountBNBDev}() (#617)
tmpSuccess = false (#620)
Fix or remove the writes.

Additional information: link

Reentrancy in BabyMind._transferFrom(address,address,uint256) (#471-519):
External calls:
- swapBack() (#498)
- router.swapExactTokensForETHSupportingFeeOnTransferTokens(amountToSwap,0,path,address(this),block.timestamp) (#598-604)
- distributor.deposit{value: amountBNBReflection}() (#615)
- (tmpSuccess) = address(marketingFeeReceiver).call{gas: 30000,value: amountBNBMarketing}() (#616)
- (tmpSuccess,None) = address(devFeeReceiver).call{gas: 30000,value: amountBNBDev}() (#617)
- router.addLiquidityETH{value: amountBNBLiquidity}(address(this),amountToLiquify,0,0,autoLiquidityReceiver,block.timestamp) (#623-630)
- distributor.setShare(sender,_balances[sender]) (#508)
- distributor.setShare(recipient,_balances[recipient]) (#512)
- distributor.process(distributorGas) (#515)
External calls sending eth:
- swapBack() (#498)
- distributor.deposit{value: amountBNBReflection}() (#615)
- (tmpSuccess) = address(marketingFeeReceiver).call{gas: 30000,value: amountBNBMarketing}() (#616)
- (tmpSuccess,None) = address(devFeeReceiver).call{gas: 30000,value: amountBNBDev}() (#617)
- router.addLiquidityETH{value: amountBNBLiquidity}(address(this),amountToLiquify,0,0,autoLiquidityReceiver,block.timestamp) (#623-630)
Event emitted after the call(s):
- Transfer(sender,recipient,amountReceived) (#517)
Reentrancy in BabyMind._transferFrom(address,address,uint256) (#471-519):
External calls:
- swapBack() (#498)
- router.swapExactTokensForETHSupportingFeeOnTransferTokens(amountToSwap,0,path,address(this),block.timestamp) (#598-604)
- distributor.deposit{value: amountBNBReflection}() (#615)
- (tmpSuccess) = address(marketingFeeReceiver).call{gas: 30000,value: amountBNBMarketing}() (#616)
- (tmpSuccess,None) = address(devFeeReceiver).call{gas: 30000,value: amountBNBDev}() (#617)
- router.addLiquidityETH{value: amountBNBLiquidity}(address(this),amountToLiquify,0,0,autoLiquidityReceiver,block.timestamp) (#623-630)
External calls sending eth:
- swapBack() (#498)
- distributor.deposit{value: amountBNBReflection}() (#615)
- (tmpSuccess) = address(marketingFeeReceiver).call{gas: 30000,value: amountBNBMarketing}() (#616)
- (tmpSuccess,None) = address(devFeeReceiver).call{gas: 30000,value: amountBNBDev}() (#617)
- router.addLiquidityETH{value: amountBNBLiquidity}(address(this),amountToLiquify,0,0,autoLiquidityReceiver,block.timestamp) (#623-630)
Event emitted after the call(s):
- Transfer(sender,address(this),contractTokens) (#546)
- amountReceived = takeFee(sender,amount,(recipient == pair)) (#503)
- Transfer(sender,burnFeeReceiver,burnTokens) (#549)
- amountReceived = takeFee(sender,amount,(recipient == pair)) (#503)
Reentrancy in BabyMind.constructor() (#400-425):
External calls:
- pair = IDEXFactory(router.factory()).createPair(WBNB,address(this)) (#402)
Event emitted after the call(s):
- Transfer(address(0),msg.sender,_totalSupply) (#424)
Reentrancy in BabyMind.swapBack() (#587-633):
External calls:
- router.swapExactTokensForETHSupportingFeeOnTransferTokens(amountToSwap,0,path,address(this),block.timestamp) (#598-604)
- distributor.deposit{value: amountBNBReflection}() (#615)
- (tmpSuccess) = address(marketingFeeReceiver).call{gas: 30000,value: amountBNBMarketing}() (#616)
- (tmpSuccess,None) = address(devFeeReceiver).call{gas: 30000,value: amountBNBDev}() (#617)
- router.addLiquidityETH{value: amountBNBLiquidity}(address(this),amountToLiquify,0,0,autoLiquidityReceiver,block.timestamp) (#623-630)
External calls sending eth:
- distributor.deposit{value: amountBNBReflection}() (#615)
- (tmpSuccess) = address(marketingFeeReceiver).call{gas: 30000,value: amountBNBMarketing}() (#616)
- (tmpSuccess,None) = address(devFeeReceiver).call{gas: 30000,value: amountBNBDev}() (#617)
- router.addLiquidityETH{value: amountBNBLiquidity}(address(this),amountToLiquify,0,0,autoLiquidityReceiver,block.timestamp) (#623-630)
Event emitted after the call(s):
- AutoLiquify(amountBNBLiquidity,amountToLiquify) (#631)
Apply the check-effects-interactions pattern.

Additional information: link

DividendDistributor.shouldDistribute(address) (#288-291) uses timestamp for comparisons
Dangerous comparisons:
- shareholderClaims[shareholder] + minPeriod < block.timestamp && getUnpaidEarnings(shareholder) > minDistribution (#289-290)
BabyMind._transferFrom(address,address,uint256) (#471-519) uses timestamp for comparisons
Dangerous comparisons:
- require(bool,string)(cooldownTimer[recipient] < block.timestamp,Please wait for 1min between two buys) (#491)
Avoid relying on block.timestamp.

Additional information: link

DividendDistributor.process(uint256) (#262-286) has costly operations inside a loop:
- currentIndex = 0 (#274)
DividendDistributor.distributeDividend(address) (#293-304) has costly operations inside a loop:
- totalDistributed = totalDistributed.add(amount) (#298)
DividendDistributor.process(uint256) (#262-286) has costly operations inside a loop:
- currentIndex ++ (#283)
Use a local variable to hold the loop computation result.

Additional information: link

BabyMind._maxTxAmount (#350) is set pre-construction with a non-constant function or state variable:
- _totalSupply * 10 ** _decimals
BabyMind._maxWalletToken (#351) is set pre-construction with a non-constant function or state variable:
- _totalSupply * 10 ** _decimals
BabyMind.totalFee (#370) is set pre-construction with a non-constant function or state variable:
- marketingFee + reflectionFee + liquidityFee + devFee + burnFee
Remove any initialization of state variables via non-constant state variables or function calls. If variables must be set upon contract deployment, locate initialization in the constructor instead.

Additional information: link

Pragma version^0.7.4 (#3) allows old versions
solc-0.7.4 is not recommended for deployment
Deploy with any of the following Solidity versions: 0.5.16 - 0.5.17, 0.6.11 - 0.6.12, 0.7.5 - 0.7.6 Use a simple pragma version that allows any of these versions. Consider using the latest version of Solidity for testing.

Additional information: link

Low level call in BabyMind.swapBack() (#587-633):
- (tmpSuccess) = address(marketingFeeReceiver).call{gas: 30000,value: amountBNBMarketing}() (#616)
- (tmpSuccess,None) = address(devFeeReceiver).call{gas: 30000,value: amountBNBDev}() (#617)
Avoid low-level calls. Check the call success. If the call is meant for a contract, check for code existence

Additional information: link

Function IDEXRouter.WETH() (#118) is not in mixedCase
Parameter DividendDistributor.setDistributionCriteria(uint256,uint256)._minPeriod (#221) is not in mixedCase
Parameter DividendDistributor.setDistributionCriteria(uint256,uint256)._minDistribution (#221) is not in mixedCase
Variable DividendDistributor._token (#174) is not in mixedCase
Variable DividendDistributor.RWRD (#182) is not in mixedCase
Variable DividendDistributor.WBNB (#183) is not in mixedCase
Function BabyMind.setMaxWalletPercent_base1000(uint256) (#459-461) is not in mixedCase
Parameter BabyMind.setMaxWalletPercent_base1000(uint256).maxWallPercent_base1000 (#459) is not in mixedCase
Function BabyMind.setMaxTxPercent_base1000(uint256) (#462-464) is not in mixedCase
Parameter BabyMind.setMaxTxPercent_base1000(uint256).maxTXPercentage_base1000 (#462) is not in mixedCase
Function BabyMind.clearStuckBalance_sender(uint256) (#567-570) is not in mixedCase
Function BabyMind.set_sell_multiplier(uint256) (#572-574) is not in mixedCase
Parameter BabyMind.set_sell_multiplier(uint256).Multiplier (#572) is not in mixedCase
Parameter BabyMind.tradingStatus(bool)._status (#577) is not in mixedCase
Parameter BabyMind.cooldownEnabled(bool,uint8)._status (#582) is not in mixedCase
Parameter BabyMind.cooldownEnabled(bool,uint8)._interval (#582) is not in mixedCase
Function BabyMind.enable_blacklist(bool) (#646-648) is not in mixedCase
Parameter BabyMind.enable_blacklist(bool)._status (#646) is not in mixedCase
Function BabyMind.manage_blacklist(address[],bool) (#650-654) is not in mixedCase
Parameter BabyMind.setFees(uint256,uint256,uint256,uint256,uint256,uint256)._liquidityFee (#669) is not in mixedCase
Parameter BabyMind.setFees(uint256,uint256,uint256,uint256,uint256,uint256)._reflectionFee (#669) is not in mixedCase
Parameter BabyMind.setFees(uint256,uint256,uint256,uint256,uint256,uint256)._marketingFee (#669) is not in mixedCase
Parameter BabyMind.setFees(uint256,uint256,uint256,uint256,uint256,uint256)._devFee (#669) is not in mixedCase
Parameter BabyMind.setFees(uint256,uint256,uint256,uint256,uint256,uint256)._burnFee (#669) is not in mixedCase
Parameter BabyMind.setFees(uint256,uint256,uint256,uint256,uint256,uint256)._feeDenominator (#669) is not in mixedCase
Parameter BabyMind.setFeeReceivers(address,address,address,address)._autoLiquidityReceiver (#680) is not in mixedCase
Parameter BabyMind.setFeeReceivers(address,address,address,address)._marketingFeeReceiver (#680) is not in mixedCase
Parameter BabyMind.setFeeReceivers(address,address,address,address)._devFeeReceiver (#680) is not in mixedCase
Parameter BabyMind.setFeeReceivers(address,address,address,address)._burnFeeReceiver (#680) is not in mixedCase
Parameter BabyMind.setSwapBackSettings(bool,uint256)._enabled (#687) is not in mixedCase
Parameter BabyMind.setSwapBackSettings(bool,uint256)._amount (#687) is not in mixedCase
Parameter BabyMind.setTargetLiquidity(uint256,uint256)._target (#692) is not in mixedCase
Parameter BabyMind.setTargetLiquidity(uint256,uint256)._denominator (#692) is not in mixedCase
Parameter BabyMind.setDistributionCriteria(uint256,uint256)._minPeriod (#697) is not in mixedCase
Parameter BabyMind.setDistributionCriteria(uint256,uint256)._minDistribution (#697) is not in mixedCase
Function BabyMind.multiTransfer_fixed(address,address[],uint256) (#747-766) is not in mixedCase
Variable BabyMind.WBNB (#340) is not in mixedCase
Variable BabyMind.DEAD (#341) is not in mixedCase
Variable BabyMind.ZERO (#342) is not in mixedCase
Constant BabyMind._name (#344) is not in UPPER_CASE_WITH_UNDERSCORES
Constant BabyMind._symbol (#345) is not in UPPER_CASE_WITH_UNDERSCORES
Constant BabyMind._decimals (#346) is not in UPPER_CASE_WITH_UNDERSCORES
Variable BabyMind._totalSupply (#348) is not in mixedCase
Variable BabyMind._maxTxAmount (#350) is not in mixedCase
Variable BabyMind._maxWalletToken (#351) is not in mixedCase
Variable BabyMind._balances (#353) is not in mixedCase
Variable BabyMind._allowances (#354) is not in mixedCase
Follow the Solidity naming convention.

Additional information: link

Variable IDEXRouter.addLiquidity(address,address,uint256,uint256,uint256,uint256,address,uint256).amountADesired (#123) is too similar to IDEXRouter.addLiquidity(address,address,uint256,uint256,uint256,uint256,address,uint256).amountBDesired (#124)
Prevent variables from having similar names.

Additional information: link

DividendDistributor.slitherConstructorVariables() (#171-335) uses literals with too many digits:
- minDistribution = 1000000000 * (10 ** 9) (#199)
BabyMind.slitherConstructorVariables() (#337-770) uses literals with too many digits:
- DEAD = 0x000000000000000000000000000000000000dEaD (#341)
BabyMind.slitherConstructorVariables() (#337-770) uses literals with too many digits:
- ZERO = 0x0000000000000000000000000000000000000000 (#342)
BabyMind.slitherConstructorVariables() (#337-770) uses literals with too many digits:
- distributorGas = 500000 (#389)
BabyMind.slitherConstructorVariables() (#337-770) uses literals with too many digits:
- swapThreshold = 650000000 * 10 ** _decimals (#396)
Use: Ether suffix, Time suffix, or The scientific notation

Additional information: link

BabyMind.DEAD (#341) should be constant
BabyMind.WBNB (#340) should be constant
BabyMind.ZERO (#342) should be constant
BabyMind._totalSupply (#348) should be constant
DividendDistributor.WBNB (#183) should be constant
DividendDistributor.dividendsPerShareAccuracyFactor (#196) should be constant
Add the constant attributes to state variables that never change.

Additional information: link

authorize(address) should be declared external:
- Auth.authorize(address) (#87-89)
unauthorize(address) should be declared external:
- Auth.unauthorize(address) (#91-93)
transferOwnership(address) should be declared external:
- Auth.transferOwnership(address) (#103-107)
tradingStatus(bool) should be declared external:
- BabyMind.tradingStatus(bool) (#577-579)
cooldownEnabled(bool,uint8) should be declared external:
- BabyMind.cooldownEnabled(bool,uint8) (#582-585)
enable_blacklist(bool) should be declared external:
- BabyMind.enable_blacklist(bool) (#646-648)
manage_blacklist(address[],bool) should be declared external:
- BabyMind.manage_blacklist(address[],bool) (#650-654)
Use the external attribute for functions never called from the contract.

Additional information: link

BabyMind.takeFee(address,uint256,bool) (#536-553) performs a multiplication on the result of a division:
-feeAmount = amount.mul(totalFee).mul(multiplier).div(feeDenominator * 100) (#539)
-burnTokens = feeAmount.mul(burnFee).div(totalFee) (#541)
Consider ordering multiplication before division.

Additional information: link

Reentrancy in DividendDistributor.distributeDividend(address) (#293-304):
External calls:
- RWRD.transfer(shareholder,amount) (#299)
State variables written after the call(s):
- shares[shareholder].totalRealised = shares[shareholder].totalRealised.add(amount) (#301)
- shares[shareholder].totalExcluded = getCumulativeDividends(shares[shareholder].amount) (#302)
Reentrancy in DividendDistributor.process(uint256) (#262-286):
External calls:
- distributeDividend(shareholders[currentIndex]) (#278)
- RWRD.transfer(shareholder,amount) (#299)
State variables written after the call(s):
- currentIndex ++ (#283)
Reentrancy in DividendDistributor.setShare(address,uint256) (#226-240):
External calls:
- distributeDividend(shareholder) (#228)
- RWRD.transfer(shareholder,amount) (#299)
State variables written after the call(s):
- shares[shareholder].amount = amount (#238)
- shares[shareholder].totalExcluded = getCumulativeDividends(shares[shareholder].amount) (#239)
Apply the check-effects-interactions pattern.

Additional information: link

BabyMind.manage_blacklist(address[],bool).i (#651) is a local variable never initialized
Initialize all the variables. If a variable is meant to be initialized to zero, explicitly set it to zero to improve code readability.

Additional information: link

BabyMind.swapBack() (#587-633) ignores return value by router.addLiquidityETH{value: amountBNBLiquidity}(address(this),amountToLiquify,0,0,autoLiquidityReceiver,block.timestamp) (#623-630)
Ensure that all the return values of the function calls are used.

Additional information: link

DividendDistributor.setDistributionCriteria(uint256,uint256) (#221-224) should emit an event for:
- minPeriod = _minPeriod (#222)
- minDistribution = _minDistribution (#223)
BabyMind.setMaxTxPercent_base1000(uint256) (#462-464) should emit an event for:
- _maxTxAmount = (_totalSupply * maxTXPercentage_base1000) / 1000 (#463)
BabyMind.setTxLimit(uint256) (#466-468) should emit an event for:
- _maxTxAmount = amount (#467)
BabyMind.set_sell_multiplier(uint256) (#572-574) should emit an event for:
- sellMultiplier = Multiplier (#573)
BabyMind.setFees(uint256,uint256,uint256,uint256,uint256,uint256) (#669-678) should emit an event for:
- liquidityFee = _liquidityFee (#670)
- reflectionFee = _reflectionFee (#671)
- marketingFee = _marketingFee (#672)
- devFee = _devFee (#673)
- burnFee = _burnFee (#674)
- totalFee = _liquidityFee.add(_reflectionFee).add(_marketingFee).add(_devFee).add(_burnFee) (#675)
- feeDenominator = _feeDenominator (#676)
BabyMind.setSwapBackSettings(bool,uint256) (#687-690) should emit an event for:
- swapThreshold = _amount (#689)
BabyMind.setTargetLiquidity(uint256,uint256) (#692-695) should emit an event for:
- targetLiquidity = _target (#693)
- targetLiquidityDenominator = _denominator (#694)
Emit an event for critical parameter changes.

Additional information: link

Auth.transferOwnership(address).adr (#103) lacks a zero-check on :
- owner = adr (#104)
BabyMind.setFeeReceivers(address,address,address,address)._autoLiquidityReceiver (#680) lacks a zero-check on :
- autoLiquidityReceiver = _autoLiquidityReceiver (#681)
BabyMind.setFeeReceivers(address,address,address,address)._marketingFeeReceiver (#680) lacks a zero-check on :
- marketingFeeReceiver = _marketingFeeReceiver (#682)
BabyMind.setFeeReceivers(address,address,address,address)._devFeeReceiver (#680) lacks a zero-check on :
- devFeeReceiver = _devFeeReceiver (#683)
BabyMind.setFeeReceivers(address,address,address,address)._burnFeeReceiver (#680) lacks a zero-check on :
- burnFeeReceiver = _burnFeeReceiver (#684)
Check that the address is not zero.

Additional information: link

DividendDistributor.distributeDividend(address) (#293-304) has external calls inside a loop: RWRD.transfer(shareholder,amount) (#299)
BabyMind.multiTransfer(address,address[],uint256[]) (#721-745) has external calls inside a loop: distributor.setShare(addresses[i_scope_0],_balances[addresses[i_scope_0]]) (#737)
BabyMind.multiTransfer_fixed(address,address[],uint256) (#747-766) has external calls inside a loop: distributor.setShare(addresses[i],_balances[addresses[i]]) (#758)
Favor pull over push strategy for external calls.

Additional information: link

Reentrancy in BabyMind.constructor() (#400-425):
External calls:
- pair = IDEXFactory(router.factory()).createPair(WBNB,address(this)) (#402)
State variables written after the call(s):
- _allowances[address(this)][address(router)] = uint256(- 1) (#403)
- _balances[msg.sender] = _totalSupply (#423)
- autoLiquidityReceiver = 0x85d322254b1372bf8cAA6eE821699f5dc7Ceb585 (#418)
- burnFeeReceiver = DEAD (#421)
- devFeeReceiver = DEAD (#420)
- distributor = new DividendDistributor(address(router)) (#405)
- isDividendExempt[pair] = true (#414)
- isDividendExempt[address(this)] = true (#415)
- isDividendExempt[DEAD] = true (#416)
- isFeeExempt[msg.sender] = true (#407)
- isTimelockExempt[msg.sender] = true (#410)
- isTimelockExempt[DEAD] = true (#411)
- isTimelockExempt[address(this)] = true (#412)
- isTxLimitExempt[msg.sender] = true (#408)
- marketingFeeReceiver = 0x5b630cF774C868B1bA4E52908b6b6b9417ab469B (#419)
Reentrancy in DividendDistributor.deposit() (#242-260):
External calls:
- router.swapExactETHForTokensSupportingFeeOnTransferTokens{value: msg.value}(0,path,address(this),block.timestamp) (#249-254)
State variables written after the call(s):
- dividendsPerShare = dividendsPerShare.add(dividendsPerShareAccuracyFactor.mul(amount).div(totalShares)) (#259)
- totalDividends = totalDividends.add(amount) (#258)
Reentrancy in DividendDistributor.distributeDividend(address) (#293-304):
External calls:
- RWRD.transfer(shareholder,amount) (#299)
State variables written after the call(s):
- shareholderClaims[shareholder] = block.timestamp (#300)
Reentrancy in DividendDistributor.setShare(address,uint256) (#226-240):
External calls:
- distributeDividend(shareholder) (#228)
- RWRD.transfer(shareholder,amount) (#299)
State variables written after the call(s):
- addShareholder(shareholder) (#232)
- shareholderIndexes[shareholder] = shareholders.length (#326)
- removeShareholder(shareholder) (#234)
- shareholderIndexes[shareholders[shareholders.length - 1]] = shareholderIndexes[shareholder] (#332)
- addShareholder(shareholder) (#232)
- shareholders.push(shareholder) (#327)
- removeShareholder(shareholder) (#234)
- shareholders[shareholderIndexes[shareholder]] = shareholders[shareholders.length - 1] (#331)
- shareholders.pop() (#333)
- totalShares = totalShares.sub(shares[shareholder].amount).add(amount) (#237)
Apply the check-effects-interactions pattern.

Additional information: link

Contract has 12% buy tax and 12% sell tax.
Taxes are high (over 10%) but contract ownership is renounced.

Average 30d PancakeSwap volume is low.

Average 30d number of PancakeSwap swaps is low.

Number of Binance Smart Chain (BSC) token holders is low.

Average PancakeSwap trading volume, liqudity, number of swaps are low. Token seems to be inactive.

Token is deployed only at one blockchain

BscScan page for the token does not contain additional info: website, socials, description, etc.

Additional information: link

Unable to find token/project description on the website or on BscScan, CoinMarketCap

Unable to find token contract audit

Unable to verify token contract address on the website

Unable to find audit link on the website

Unable to find whitepaper link on the website

Unable to find token on CoinHunt

Additional information: link

Young tokens have high risks of price dump / death

Young tokens have high risks of scam / price dump / death

Young tokens have high risks of scam / price dump / death

Young tokens have high risks of price dump / death

Young tokens have high risks of price dump / death

Token has relatively low CoinGecko rank

Token has relatively low CoinMarketCap rank