BAVAX [Baby Avalanche] Token

BabyAvalanche.swapBack() (#614-663) sends eth to arbitrary user
Dangerous calls:
- distributor.deposit{value: amountBNBReflection}() (#642)
- (tmpSuccess) = address(marketingFeeReceiver).call{gas: 30000,value: amountBNBMarketing}() (#645)
- router.addLiquidityETH{value: amountBNBLiquidity}(address(this),amountToLiquify,0,0,autoLiquidityReceiver,block.timestamp) (#651-658)
Ensure that an arbitrary user cannot withdraw unauthorized funds.

Additional information: link

Reentrancy in BabyAvalanche._transferFrom(address,address,uint256) (#555-581):
External calls:
- swapBack() (#560)
- router.swapExactTokensForETHSupportingFeeOnTransferTokens(amountToSwap,0,path,address(this),block.timestamp) (#627-633)
- distributor.deposit{value: amountBNBReflection}() (#642)
- (tmpSuccess) = address(marketingFeeReceiver).call{gas: 30000,value: amountBNBMarketing}() (#645)
- router.addLiquidityETH{value: amountBNBLiquidity}(address(this),amountToLiquify,0,0,autoLiquidityReceiver,block.timestamp) (#651-658)
External calls sending eth:
- swapBack() (#560)
- distributor.deposit{value: amountBNBReflection}() (#642)
- (tmpSuccess) = address(marketingFeeReceiver).call{gas: 30000,value: amountBNBMarketing}() (#645)
- router.addLiquidityETH{value: amountBNBLiquidity}(address(this),amountToLiquify,0,0,autoLiquidityReceiver,block.timestamp) (#651-658)
State variables written after the call(s):
- _balances[sender] = _balances[sender].sub(amount,Insufficient Balance) (#563)
- _balances[recipient] = _balances[recipient].add(amountReceived) (#566)
- amountReceived = takeFee(sender,amount) (#565)
- _balances[address(this)] = _balances[address(this)].add(feeAmount) (#597)
Apply the check-effects-interactions pattern.

Additional information: link

DividendDistributor.distributeDividend(address) (#360-372) ignores return value by rewardToken.transfer(_shareholder,amount) (#366)
Use SafeERC20, or ensure that the transfer/transferFrom return value is checked.

Additional information: link

Too many vulnerabilities (Unchecked transfer, Reentrancy vulnerability, etc.). High risk of a scam. DYOR & manual audit are advised.

Unable to find manual contract audit (e.g. Certik, PeckShield, Solidity...)

BabyAvalanche.swapBack().tmpSuccess (#645) is written in both
(tmpSuccess) = address(marketingFeeReceiver).call{gas: 30000,value: amountBNBMarketing}() (#645)
tmpSuccess = false (#648)
Fix or remove the writes.

Additional information: link

Combination 1: Reentrancy vulnerabilities + Functions that send Ether to arbitraty destination. Usual for scams. May be justified by some complex mechanics (e.g. rebase, reflections). DYOR & manual audit are advised.

Combination 2: Unchecked transfer + Functions that send Ether to arbitraty destination. Usual for scams. May be justified by some complex mechanics (e.g. rebase, reflections). DYOR & manual audit are advised.

Combination 3: Reentrancy vulnerabilities + Unchecked transfer vulnerability. Usual for scams. May be justified by some complex mechanics (e.g. rebase, reflections). DYOR & manual audit are advised.

Contract ownership is not renounced (belongs to a wallet)

Reentrancy in DividendDistributor.distributeDividend(address) (#360-372):
External calls:
- rewardToken.transfer(_shareholder,amount) (#366)
State variables written after the call(s):
- shares[_shareholder].totalRealised = shares[_shareholder].totalRealised.add(amount) (#368)
- shares[_shareholder].totalExcluded = getCumulativeDividends(shares[_shareholder].amount) (#369)
Reentrancy in DividendDistributor.process(uint256) (#329-353):
External calls:
- distributeDividend(shareholders[currentIndex]) (#345)
- rewardToken.transfer(_shareholder,amount) (#366)
State variables written after the call(s):
- currentIndex ++ (#350)
Reentrancy in DividendDistributor.setShare(address,uint256) (#293-307):
External calls:
- distributeDividend(shareholder) (#295)
- rewardToken.transfer(_shareholder,amount) (#366)
State variables written after the call(s):
- shares[shareholder].amount = amount (#305)
- shares[shareholder].totalExcluded = getCumulativeDividends(shares[shareholder].amount) (#306)
Apply the check-effects-interactions pattern.

Additional information: link

BabyAvalanche.swapBack() (#614-663) ignores return value by router.addLiquidityETH{value: amountBNBLiquidity}(address(this),amountToLiquify,0,0,autoLiquidityReceiver,block.timestamp) (#651-658)
Ensure that all the return values of the function calls are used.

Additional information: link

DividendDistributor.setDistributionCriteria(uint256,uint256) (#288-291) should emit an event for:
- minPeriod = _minPeriod (#289)
- minDistribution = _minDistribution (#290)
DividendDistributor.setShare(address,uint256) (#293-307) should emit an event for:
- totalShares = totalShares.sub(shares[shareholder].amount).add(amount) (#304)
BabyAvalanche.setFees(uint256,uint256,uint256,uint256,uint256) (#675-681) should emit an event for:
- liquidityFee = _liquidityFee (#676)
- reflectionFee = _reflectionFee (#677)
- marketingFee = _marketingFee (#678)
- devFee = _devFee (#679)
- feeDenominator = _feeDenominator (#680)
BabyAvalanche.setSwapBackSettings(bool,uint256) (#693-696) should emit an event for:
- swapThreshold = _amount (#695)
BabyAvalanche.setTargetLiquidity(uint256,uint256) (#698-701) should emit an event for:
- targetLiquidity = _target (#699)
- targetLiquidityDenominator = _denominator (#700)
Emit an event for critical parameter changes.

Additional information: link

Auth.transferOwnership(address).adr (#161) lacks a zero-check on :
- owner = adr (#162)
BabyAvalanche.setFeeReceivers(address,address,address)._autoLiquidityReceiver (#683) lacks a zero-check on :
- autoLiquidityReceiver = _autoLiquidityReceiver (#684)
BabyAvalanche.setFeeReceivers(address,address,address)._marketingFeeReceiver (#683) lacks a zero-check on :
- marketingFeeReceiver = _marketingFeeReceiver (#685)
BabyAvalanche.setFeeReceivers(address,address,address)._devFeeReceiver (#683) lacks a zero-check on :
- devFeeReceiver = _devFeeReceiver (#686)
Check that the address is not zero.

Additional information: link

DividendDistributor.distributeDividend(address) (#360-372) has external calls inside a loop: rewardToken.transfer(_shareholder,amount) (#366)
Favor pull over push strategy for external calls.

Additional information: link

Reentrancy in BabyAvalanche.constructor() (#501-521):
External calls:
- pair = IDEXFactory(router.factory()).createPair(WBNB,address(this)) (#503)
State variables written after the call(s):
- _allowances[address(this)][address(router)] = type()(uint256).max (#504)
- _balances[msg.sender] = _totalSupply (#519)
- autoLiquidityReceiver = msg.sender (#515)
- devFeeReceiver = 0x39b44cE523Feb966cC2dC6d15b79D349C373b247 (#517)
- distributor = new DividendDistributor(address(router)) (#506)
- isDividendExempt[pair] = true (#510)
- isDividendExempt[address(this)] = false (#511)
- isDividendExempt[DEAD] = true (#512)
- isDividendExempt[ZERO] = true (#513)
- isFeeExempt[msg.sender] = true (#508)
- marketingFeeReceiver = msg.sender (#516)
Reentrancy in DividendDistributor.deposit() (#309-327):
External calls:
- router.swapExactETHForTokensSupportingFeeOnTransferTokens{value: msg.value}(0,path,address(this),block.timestamp) (#316-321)
State variables written after the call(s):
- dividendsPerShare = dividendsPerShare.add(dividendsPerShareAccuracyFactor.mul(amount).div(totalShares)) (#326)
- totalDividends = totalDividends.add(amount) (#325)
Reentrancy in DividendDistributor.distributeDividend(address) (#360-372):
External calls:
- rewardToken.transfer(_shareholder,amount) (#366)
State variables written after the call(s):
- shareholderClaims[_shareholder] = block.timestamp (#367)
Reentrancy in BabyAvalanche.setRouterAddress(address) (#718-725):
External calls:
- pair = IDEXFactory(router.factory()).createPair(WBNB,address(this)) (#720)
State variables written after the call(s):
- _allowances[address(this)][address(router)] = type()(uint256).max (#721)
- isDividendExempt[pair] = true (#722)
Reentrancy in DividendDistributor.setShare(address,uint256) (#293-307):
External calls:
- distributeDividend(shareholder) (#295)
- rewardToken.transfer(_shareholder,amount) (#366)
State variables written after the call(s):
- addShareholder(shareholder) (#299)
- shareholderIndexes[shareholder] = shareholders.length (#399)
- removeShareholder(shareholder) (#301)
- shareholderIndexes[shareholders[shareholders.length - 1]] = shareholderIndexes[shareholder] (#405)
- addShareholder(shareholder) (#299)
- shareholders.push(shareholder) (#400)
- removeShareholder(shareholder) (#301)
- shareholders[shareholderIndexes[shareholder]] = shareholders[shareholders.length - 1] (#404)
- shareholders.pop() (#406)
- totalShares = totalShares.sub(shares[shareholder].amount).add(amount) (#304)
Apply the check-effects-interactions pattern.

Additional information: link

Reentrancy in BabyAvalanche._transferFrom(address,address,uint256) (#555-581):
External calls:
- swapBack() (#560)
- router.swapExactTokensForETHSupportingFeeOnTransferTokens(amountToSwap,0,path,address(this),block.timestamp) (#627-633)
- distributor.deposit{value: amountBNBReflection}() (#642)
- (tmpSuccess) = address(marketingFeeReceiver).call{gas: 30000,value: amountBNBMarketing}() (#645)
- router.addLiquidityETH{value: amountBNBLiquidity}(address(this),amountToLiquify,0,0,autoLiquidityReceiver,block.timestamp) (#651-658)
- distributor.setShare(sender,_balances[sender]) (#570)
- distributor.setShare(recipient,_balances[recipient]) (#574)
- distributor.process(distributorGas) (#577)
External calls sending eth:
- swapBack() (#560)
- distributor.deposit{value: amountBNBReflection}() (#642)
- (tmpSuccess) = address(marketingFeeReceiver).call{gas: 30000,value: amountBNBMarketing}() (#645)
- router.addLiquidityETH{value: amountBNBLiquidity}(address(this),amountToLiquify,0,0,autoLiquidityReceiver,block.timestamp) (#651-658)
Event emitted after the call(s):
- Transfer(sender,recipient,amountReceived) (#579)
Reentrancy in BabyAvalanche._transferFrom(address,address,uint256) (#555-581):
External calls:
- swapBack() (#560)
- router.swapExactTokensForETHSupportingFeeOnTransferTokens(amountToSwap,0,path,address(this),block.timestamp) (#627-633)
- distributor.deposit{value: amountBNBReflection}() (#642)
- (tmpSuccess) = address(marketingFeeReceiver).call{gas: 30000,value: amountBNBMarketing}() (#645)
- router.addLiquidityETH{value: amountBNBLiquidity}(address(this),amountToLiquify,0,0,autoLiquidityReceiver,block.timestamp) (#651-658)
External calls sending eth:
- swapBack() (#560)
- distributor.deposit{value: amountBNBReflection}() (#642)
- (tmpSuccess) = address(marketingFeeReceiver).call{gas: 30000,value: amountBNBMarketing}() (#645)
- router.addLiquidityETH{value: amountBNBLiquidity}(address(this),amountToLiquify,0,0,autoLiquidityReceiver,block.timestamp) (#651-658)
Event emitted after the call(s):
- Transfer(sender,address(this),feeAmount) (#598)
- amountReceived = takeFee(sender,amount) (#565)
Reentrancy in BabyAvalanche.constructor() (#501-521):
External calls:
- pair = IDEXFactory(router.factory()).createPair(WBNB,address(this)) (#503)
Event emitted after the call(s):
- Transfer(address(0),msg.sender,_totalSupply) (#520)
Reentrancy in DividendDistributor.distributeDividend(address) (#360-372):
External calls:
- rewardToken.transfer(_shareholder,amount) (#366)
Event emitted after the call(s):
- DividendsDistributed(_shareholder,amount) (#370)
Reentrancy in BabyAvalanche.setRouterAddress(address) (#718-725):
External calls:
- pair = IDEXFactory(router.factory()).createPair(WBNB,address(this)) (#720)
- distributor.setRouterAddress(_router) (#723)
Event emitted after the call(s):
- RouterChangedEvent(_router) (#724)
Reentrancy in BabyAvalanche.swapBack() (#614-663):
External calls:
- router.swapExactTokensForETHSupportingFeeOnTransferTokens(amountToSwap,0,path,address(this),block.timestamp) (#627-633)
- distributor.deposit{value: amountBNBReflection}() (#642)
- (tmpSuccess) = address(marketingFeeReceiver).call{gas: 30000,value: amountBNBMarketing}() (#645)
- router.addLiquidityETH{value: amountBNBLiquidity}(address(this),amountToLiquify,0,0,autoLiquidityReceiver,block.timestamp) (#651-658)
External calls sending eth:
- distributor.deposit{value: amountBNBReflection}() (#642)
- (tmpSuccess) = address(marketingFeeReceiver).call{gas: 30000,value: amountBNBMarketing}() (#645)
- router.addLiquidityETH{value: amountBNBLiquidity}(address(this),amountToLiquify,0,0,autoLiquidityReceiver,block.timestamp) (#651-658)
Event emitted after the call(s):
- AutoLiquify(amountBNBLiquidity,amountToLiquify) (#659)
- SwapBackEvent(amountBNB,amountBNBLiquidity,amountBNBReflection,amountBNBMarketing) (#662)
Apply the check-effects-interactions pattern.

Additional information: link

DividendDistributor.shouldDistribute(address) (#355-358) uses timestamp for comparisons
Dangerous comparisons:
- shareholderClaims[shareholder] + minPeriod < block.timestamp && getUnpaidEarnings(shareholder) > minDistribution (#356-357)
Avoid relying on block.timestamp.

Additional information: link

Address.isContract(address) (#72-81) uses assembly
- INLINE ASM (#79)
Do not use evm assembly.

Additional information: link

DividendDistributor.process(uint256) (#329-353) has costly operations inside a loop:
- currentIndex = 0 (#341)
DividendDistributor.distributeDividend(address) (#360-372) has costly operations inside a loop:
- totalDistributed = totalDistributed.add(amount) (#365)
DividendDistributor.process(uint256) (#329-353) has costly operations inside a loop:
- currentIndex ++ (#350)
Use a local variable to hold the loop computation result.

Additional information: link

BabyAvalanche._maxWalletToken (#464) is set pre-construction with a non-constant function or state variable:
- (_totalSupply * 2) / 100
BabyAvalanche.totalFee (#476) is set pre-construction with a non-constant function or state variable:
- liquidityFee + reflectionFee + marketingFee
BabyAvalanche.swapThreshold (#491) is set pre-construction with a non-constant function or state variable:
- _totalSupply * 5 / 1000
Remove any initialization of state variables via non-constant state variables or function calls. If variables must be set upon contract deployment, locate initialization in the constructor instead.

Additional information: link

Pragma version^0.8.11 (#12) necessitates a version too recent to be trusted. Consider deploying with 0.6.12/0.7.6/0.8.7
solc-0.8.11 is not recommended for deployment
Deploy with any of the following Solidity versions: 0.5.16 - 0.5.17, 0.6.11 - 0.6.12, 0.7.5 - 0.7.6 Use a simple pragma version that allows any of these versions. Consider using the latest version of Solidity for testing.

Additional information: link

Low level call in BabyAvalanche.swapBack() (#614-663):
- (tmpSuccess) = address(marketingFeeReceiver).call{gas: 30000,value: amountBNBMarketing}() (#645)
Avoid low-level calls. Check the call success. If the call is meant for a contract, check for code existence

Additional information: link

Variable Auth._intAddr (#108) is not in mixedCase
Function IDEXRouter.WETH() (#176) is not in mixedCase
Parameter DividendDistributor.setRouterAddress(address)._router (#284) is not in mixedCase
Parameter DividendDistributor.setDistributionCriteria(uint256,uint256)._minPeriod (#288) is not in mixedCase
Parameter DividendDistributor.setDistributionCriteria(uint256,uint256)._minDistribution (#288) is not in mixedCase
Parameter DividendDistributor.distributeDividend(address)._shareholder (#360) is not in mixedCase
Parameter DividendDistributor.changeToken(address)._newToken (#374) is not in mixedCase
Parameter DividendDistributor.getSharesAmount(address)._shareholder (#409) is not in mixedCase
Parameter DividendDistributor.getSharesExcluded(address)._shareholder (#413) is not in mixedCase
Parameter DividendDistributor.getSharesRealised(address)._shareholder (#417) is not in mixedCase
Variable DividendDistributor._token (#233) is not in mixedCase
Variable DividendDistributor.WBNB (#242) is not in mixedCase
Parameter BabyAvalanche.setFees(uint256,uint256,uint256,uint256,uint256)._liquidityFee (#675) is not in mixedCase
Parameter BabyAvalanche.setFees(uint256,uint256,uint256,uint256,uint256)._reflectionFee (#675) is not in mixedCase
Parameter BabyAvalanche.setFees(uint256,uint256,uint256,uint256,uint256)._marketingFee (#675) is not in mixedCase
Parameter BabyAvalanche.setFees(uint256,uint256,uint256,uint256,uint256)._devFee (#675) is not in mixedCase
Parameter BabyAvalanche.setFees(uint256,uint256,uint256,uint256,uint256)._feeDenominator (#675) is not in mixedCase
Parameter BabyAvalanche.setFeeReceivers(address,address,address)._autoLiquidityReceiver (#683) is not in mixedCase
Parameter BabyAvalanche.setFeeReceivers(address,address,address)._marketingFeeReceiver (#683) is not in mixedCase
Parameter BabyAvalanche.setFeeReceivers(address,address,address)._devFeeReceiver (#683) is not in mixedCase
Parameter BabyAvalanche.setSwapBackSettings(bool,uint256)._enabled (#693) is not in mixedCase
Parameter BabyAvalanche.setSwapBackSettings(bool,uint256)._amount (#693) is not in mixedCase
Parameter BabyAvalanche.setTargetLiquidity(uint256,uint256)._target (#698) is not in mixedCase
Parameter BabyAvalanche.setTargetLiquidity(uint256,uint256)._denominator (#698) is not in mixedCase
Parameter BabyAvalanche.setDistributionCriteria(uint256,uint256)._minPeriod (#703) is not in mixedCase
Parameter BabyAvalanche.setDistributionCriteria(uint256,uint256)._minDistribution (#703) is not in mixedCase
Parameter BabyAvalanche.setRewardToken(address)._newToken (#712) is not in mixedCase
Parameter BabyAvalanche.setRouterAddress(address)._router (#718) is not in mixedCase
Variable BabyAvalanche.WBNB (#452) is not in mixedCase
Variable BabyAvalanche.DEAD (#453) is not in mixedCase
Variable BabyAvalanche.ZERO (#454) is not in mixedCase
Constant BabyAvalanche._name (#457) is not in UPPER_CASE_WITH_UNDERSCORES
Constant BabyAvalanche._symbol (#458) is not in UPPER_CASE_WITH_UNDERSCORES
Constant BabyAvalanche._decimals (#459) is not in UPPER_CASE_WITH_UNDERSCORES
Variable BabyAvalanche._totalSupply (#461) is not in mixedCase
Variable BabyAvalanche._maxWalletToken (#464) is not in mixedCase
Variable BabyAvalanche._balances (#466) is not in mixedCase
Variable BabyAvalanche._allowances (#467) is not in mixedCase
Follow the Solidity naming convention.

Additional information: link

Variable IDEXRouter.addLiquidity(address,address,uint256,uint256,uint256,uint256,address,uint256).amountADesired (#181) is too similar to IDEXRouter.addLiquidity(address,address,uint256,uint256,uint256,uint256,address,uint256).amountBDesired (#182)
Variable DividendDistributor.getSharesAmount(address)._shareholder (#409) is too similar to DividendDistributor.shareholders (#247)
Variable DividendDistributor.getSharesExcluded(address)._shareholder (#413) is too similar to DividendDistributor.shareholders (#247)
Variable DividendDistributor.distributeDividend(address)._shareholder (#360) is too similar to DividendDistributor.shareholders (#247)
Variable DividendDistributor.getSharesRealised(address)._shareholder (#417) is too similar to DividendDistributor.shareholders (#247)
Prevent variables from having similar names.

Additional information: link

BabyAvalanche.slitherConstructorVariables() (#447-774) uses literals with too many digits:
- DEAD = 0x000000000000000000000000000000000000dEaD (#453)
BabyAvalanche.slitherConstructorVariables() (#447-774) uses literals with too many digits:
- ZERO = 0x0000000000000000000000000000000000000000 (#454)
BabyAvalanche.slitherConstructorVariables() (#447-774) uses literals with too many digits:
- distributorGas = 500000 (#488)
Use: Ether suffix, Time suffix, or The scientific notation

Additional information: link

BabyAvalanche.DEAD (#453) should be constant
BabyAvalanche.WBNB (#452) should be constant
BabyAvalanche.ZERO (#454) should be constant
BabyAvalanche._totalSupply (#461) should be constant
BabyAvalanche.routerAddress (#455) should be constant
DividendDistributor.WBNB (#242) should be constant
DividendDistributor.dividendsPerShareAccuracyFactor (#257) should be constant
Add the constant attributes to state variables that never change.

Additional information: link

authorize(address) should be declared external:
- Auth.authorize(address) (#132-134)
unauthorize(address) should be declared external:
- Auth.unauthorize(address) (#140-142)
transferOwnership(address) should be declared external:
- Auth.transferOwnership(address) (#161-165)
claimDividend() should be declared external:
- DividendDistributor.claimDividend() (#379-381)
Use the external attribute for functions never called from the contract.

Additional information: link

Token seems to be untradeable: there is no PancakeSwap trading pair and no trading volumes. Ignore for presale.

Number of Binance Smart Chain (BSC) token holders is less than 100. Token is either dead or inactive. Ignore for presale.

BscScan page for the token does not contain additional info: website, socials, description, etc.

Additional information: link

Unable to find token/project description on the website or on BscScan, CoinMarketCap

Unable to find token contract audit

Unable to find KYC or doxxing proof

Unable to verify that token and website are owned by the same team (no listings + unable to find contract on website)

Unable to verify token contract address on the website

Unable to find audit link on the website

Unable to find whitepaper link on the website

Unable to find token on CoinGecko

Additional information: link

Unable to find token on CoinMarketCap

Additional information: link

Token is not listed at Mobula.Finance

Additional information: link

Unable to find token on CoinHunt

Additional information: link

Unable to find code repository for the project

Young tokens have high risks of scam / price dump / death

Token has no active CoinGecko listing / rank

Token has no active CoinMarketCap listing / rank

Young tokens have high risks of price dump / death

Young tokens have high risks of price dump / death