BabyDogeZilla Token Logo

BabyDogeZilla Token

About BabyDogeZilla

Listings

Token 11 months
CoinGecko 11 months
CoinMarketCap 11 months
white paper

BabyDogeZilla is a low tax, deflationary meme-token with simple tokenomics designed to reward the holders of the token. Inspired by Dogecoin, Baby Doge Coin, and Doge Zilla, BabyDogeZilla seeks to incentivize new investors to buy in and existing investors to hold. This is achieved through daily manual burns (a.k.a. BURNZILLA) and building a strong community of investors.

The purpose of BabyDogeZilla is to reward its holders through a continually rising price floor, which is not driven by rebasing mechanics, but instead through simple and effective tokenomics.

In the next phase of the project, BabyDogeZilla will form the center-piece of the BabyDogeZilla ecosystem, which includes NFT collections, staking, a launchpad, and other Web3.0 products and services.

Social

Laser Scorebeta Last Audit: 4 July 2022

report
Token seems to be (relatively) fine. It still become a scam, but probability is moderate.

Reentrancy in BabyDogeZilla._transfer(address,address,uint256) (#992-1036):
External calls:
- swapAndLiquify(contractTokenBalance) (#1023)
- uniswapV2Router.addLiquidityETH{value: ethAmount}(address(this),tokenAmount,0,0,owner(),block.timestamp) (#1084-1091)
- uniswapV2Router.swapExactTokensForETHSupportingFeeOnTransferTokens(tokenAmount,0,path,address(this),block.timestamp) (#1070-1076)
External calls sending eth:
- swapAndLiquify(contractTokenBalance) (#1023)
- uniswapV2Router.addLiquidityETH{value: ethAmount}(address(this),tokenAmount,0,0,owner(),block.timestamp) (#1084-1091)
State variables written after the call(s):
- _tokenTransfer(from,to,amount,takeFee) (#1035)
- _rOwned[address(this)] = _rOwned[address(this)].add(rLiquidity) (#948)
- _rOwned[sender] = _rOwned[sender].sub(rAmount) (#1117)
- _rOwned[sender] = _rOwned[sender].sub(rAmount) (#1126)
- _rOwned[sender] = _rOwned[sender].sub(rAmount) (#1137)
- _rOwned[sender] = _rOwned[sender].sub(rAmount) (#864)
- _rOwned[recipient] = _rOwned[recipient].add(rTransferAmount) (#1118)
- _rOwned[recipient] = _rOwned[recipient].add(rTransferAmount) (#1128)
- _rOwned[recipient] = _rOwned[recipient].add(rTransferAmount) (#1138)
- _rOwned[recipient] = _rOwned[recipient].add(rTransferAmount) (#866)
- _tokenTransfer(from,to,amount,takeFee) (#1035)
- _rTotal = _rTotal.sub(rFee) (#903)
- _tokenTransfer(from,to,amount,takeFee) (#1035)
- _tOwned[address(this)] = _tOwned[address(this)].add(tLiquidity) (#950)
- _tOwned[sender] = _tOwned[sender].sub(tAmount) (#863)
- _tOwned[sender] = _tOwned[sender].sub(tAmount) (#1136)
- _tOwned[recipient] = _tOwned[recipient].add(tTransferAmount) (#1127)
- _tOwned[recipient] = _tOwned[recipient].add(tTransferAmount) (#865)
Apply the check-effects-interactions pattern.

Additional information: link


Unable to verify that contract auditor is trusted: Certik, Quantstamp, Hacken, Solidity, Paladinsec, Openzeppelin, Verichains


Not a direct threat, but may indicate unreliable intentions of developer. Widespread names (e.g. Elon, King, Moon, Doge) are common among meme-tokens and scams. The allow to gain free hype and attract unexperienced investors.

BabyDogeZilla.addLiquidity(uint256,uint256) (#1079-1092) ignores return value by uniswapV2Router.addLiquidityETH{value: ethAmount}(address(this),tokenAmount,0,0,owner(),block.timestamp) (#1084-1091)
Ensure that all the return values of the function calls are used.

Additional information: link

BabyDogeZilla.includeInReward(address) (#849-860) has costly operations inside a loop:
- _excluded.pop() (#856)
Use a local variable to hold the loop computation result.

Additional information: link

Reentrancy in BabyDogeZilla._transfer(address,address,uint256) (#992-1036):
External calls:
- swapAndLiquify(contractTokenBalance) (#1023)
- uniswapV2Router.addLiquidityETH{value: ethAmount}(address(this),tokenAmount,0,0,owner(),block.timestamp) (#1084-1091)
- uniswapV2Router.swapExactTokensForETHSupportingFeeOnTransferTokens(tokenAmount,0,path,address(this),block.timestamp) (#1070-1076)
External calls sending eth:
- swapAndLiquify(contractTokenBalance) (#1023)
- uniswapV2Router.addLiquidityETH{value: ethAmount}(address(this),tokenAmount,0,0,owner(),block.timestamp) (#1084-1091)
Event emitted after the call(s):
- Transfer(sender,recipient,tTransferAmount) (#1121)
- _tokenTransfer(from,to,amount,takeFee) (#1035)
- Transfer(sender,recipient,tTransferAmount) (#1131)
- _tokenTransfer(from,to,amount,takeFee) (#1035)
- Transfer(sender,recipient,tTransferAmount) (#1141)
- _tokenTransfer(from,to,amount,takeFee) (#1035)
- Transfer(sender,recipient,tTransferAmount) (#869)
- _tokenTransfer(from,to,amount,takeFee) (#1035)
Reentrancy in BabyDogeZilla.constructor() (#736-752):
External calls:
- uniswapV2Pair = IUniswapV2Factory(_uniswapV2Router.factory()).createPair(address(this),_uniswapV2Router.WETH()) (#741-742)
Event emitted after the call(s):
- Transfer(address(0),_msgSender(),_tTotal) (#751)
Reentrancy in BabyDogeZilla.swapAndLiquify(uint256) (#1038-1059):
External calls:
- swapTokensForEth(half) (#1050)
- uniswapV2Router.swapExactTokensForETHSupportingFeeOnTransferTokens(tokenAmount,0,path,address(this),block.timestamp) (#1070-1076)
- addLiquidity(otherHalf,newBalance) (#1056)
- uniswapV2Router.addLiquidityETH{value: ethAmount}(address(this),tokenAmount,0,0,owner(),block.timestamp) (#1084-1091)
External calls sending eth:
- addLiquidity(otherHalf,newBalance) (#1056)
- uniswapV2Router.addLiquidityETH{value: ethAmount}(address(this),tokenAmount,0,0,owner(),block.timestamp) (#1084-1091)
Event emitted after the call(s):
- Approval(owner,spender,amount) (#989)
- addLiquidity(otherHalf,newBalance) (#1056)
- SwapAndLiquify(half,newBalance,otherHalf) (#1058)
Reentrancy in BabyDogeZilla.transferFrom(address,address,uint256) (#789-793):
External calls:
- _transfer(sender,recipient,amount) (#790)
- uniswapV2Router.addLiquidityETH{value: ethAmount}(address(this),tokenAmount,0,0,owner(),block.timestamp) (#1084-1091)
- uniswapV2Router.swapExactTokensForETHSupportingFeeOnTransferTokens(tokenAmount,0,path,address(this),block.timestamp) (#1070-1076)
External calls sending eth:
- _transfer(sender,recipient,amount) (#790)
- uniswapV2Router.addLiquidityETH{value: ethAmount}(address(this),tokenAmount,0,0,owner(),block.timestamp) (#1084-1091)
Event emitted after the call(s):
- Approval(owner,spender,amount) (#989)
- _approve(sender,_msgSender(),_allowances[sender][_msgSender()].sub(amount,ERC20: transfer amount exceeds allowance)) (#791)
Apply the check-effects-interactions pattern.

Additional information: link

Redundant expression "this (#241)" inContext (#235-244)
Remove redundant statements if they congest code but offer no value.

Additional information: link

BabyDogeZilla._rTotal (#700) is set pre-construction with a non-constant function or state variable:
- (MAX - (MAX % _tTotal))
BabyDogeZilla._previousTaxFee (#708) is set pre-construction with a non-constant function or state variable:
- _taxFee
BabyDogeZilla._previousLiquidityFee (#711) is set pre-construction with a non-constant function or state variable:
- _liquidityFee
Remove any initialization of state variables via non-constant state variables or function calls. If variables must be set upon contract deployment, locate initialization in the constructor instead.

Additional information: link

Low level call in Address.sendValue(address,uint256) (#295-301):
- (success) = recipient.call{value: amount}() (#299)
Low level call in Address._functionCallWithValue(address,bytes,uint256,string) (#361-382):
- (success,returndata) = target.call{value: weiValue}(data) (#365)
Avoid low-level calls. Check the call success. If the call is meant for a contract, check for code existence

Additional information: link

Function IUniswapV2Pair.DOMAIN_SEPARATOR() (#507) is not in mixedCase
Function IUniswapV2Pair.PERMIT_TYPEHASH() (#508) is not in mixedCase
Function IUniswapV2Pair.MINIMUM_LIQUIDITY() (#525) is not in mixedCase
Function IUniswapV2Router01.WETH() (#547) is not in mixedCase
Parameter BabyDogeZilla.setSwapAndLiquifyEnabled(bool)._enabled (#894) is not in mixedCase
Parameter BabyDogeZilla.calculateTaxFee(uint256)._amount (#953) is not in mixedCase
Parameter BabyDogeZilla.calculateLiquidityFee(uint256)._amount (#959) is not in mixedCase
Variable BabyDogeZilla._taxFee (#707) is not in mixedCase
Variable BabyDogeZilla._liquidityFee (#710) is not in mixedCase
Variable BabyDogeZilla._maxTxAmount (#719) is not in mixedCase
Follow the Solidity naming convention.

Additional information: link

Variable IUniswapV2Router01.addLiquidity(address,address,uint256,uint256,uint256,uint256,address,uint256).amountADesired (#552) is too similar to IUniswapV2Router01.addLiquidity(address,address,uint256,uint256,uint256,uint256,address,uint256).amountBDesired (#553)
Variable BabyDogeZilla._transferFromExcluded(address,address,uint256).rTransferAmount (#1135) is too similar to BabyDogeZilla._transferStandard(address,address,uint256).tTransferAmount (#1116)
Variable BabyDogeZilla._transferToExcluded(address,address,uint256).rTransferAmount (#1125) is too similar to BabyDogeZilla._transferBothExcluded(address,address,uint256).tTransferAmount (#862)
Variable BabyDogeZilla._getValues(uint256).rTransferAmount (#909) is too similar to BabyDogeZilla._getTValues(uint256).tTransferAmount (#916)
Variable BabyDogeZilla._transferToExcluded(address,address,uint256).rTransferAmount (#1125) is too similar to BabyDogeZilla._transferStandard(address,address,uint256).tTransferAmount (#1116)
Variable BabyDogeZilla._transferStandard(address,address,uint256).rTransferAmount (#1116) is too similar to BabyDogeZilla._transferBothExcluded(address,address,uint256).tTransferAmount (#862)
Variable BabyDogeZilla._transferFromExcluded(address,address,uint256).rTransferAmount (#1135) is too similar to BabyDogeZilla._transferToExcluded(address,address,uint256).tTransferAmount (#1125)
Variable BabyDogeZilla.reflectionFromToken(uint256,bool).rTransferAmount (#828) is too similar to BabyDogeZilla._transferBothExcluded(address,address,uint256).tTransferAmount (#862)
Variable BabyDogeZilla._transferFromExcluded(address,address,uint256).rTransferAmount (#1135) is too similar to BabyDogeZilla._getTValues(uint256).tTransferAmount (#916)
Variable BabyDogeZilla._transferBothExcluded(address,address,uint256).rTransferAmount (#862) is too similar to BabyDogeZilla._transferBothExcluded(address,address,uint256).tTransferAmount (#862)
Variable BabyDogeZilla._transferStandard(address,address,uint256).rTransferAmount (#1116) is too similar to BabyDogeZilla._transferStandard(address,address,uint256).tTransferAmount (#1116)
Variable BabyDogeZilla.reflectionFromToken(uint256,bool).rTransferAmount (#828) is too similar to BabyDogeZilla._transferStandard(address,address,uint256).tTransferAmount (#1116)
Variable BabyDogeZilla._transferToExcluded(address,address,uint256).rTransferAmount (#1125) is too similar to BabyDogeZilla._getTValues(uint256).tTransferAmount (#916)
Variable BabyDogeZilla._transferToExcluded(address,address,uint256).rTransferAmount (#1125) is too similar to BabyDogeZilla._transferToExcluded(address,address,uint256).tTransferAmount (#1125)
Variable BabyDogeZilla._transferFromExcluded(address,address,uint256).rTransferAmount (#1135) is too similar to BabyDogeZilla._getValues(uint256).tTransferAmount (#908)
Variable BabyDogeZilla._transferStandard(address,address,uint256).rTransferAmount (#1116) is too similar to BabyDogeZilla._getTValues(uint256).tTransferAmount (#916)
Variable BabyDogeZilla.reflectionFromToken(uint256,bool).rTransferAmount (#828) is too similar to BabyDogeZilla._getTValues(uint256).tTransferAmount (#916)
Variable BabyDogeZilla._transferFromExcluded(address,address,uint256).rTransferAmount (#1135) is too similar to BabyDogeZilla._transferFromExcluded(address,address,uint256).tTransferAmount (#1135)
Variable BabyDogeZilla.reflectionFromToken(uint256,bool).rTransferAmount (#828) is too similar to BabyDogeZilla._transferToExcluded(address,address,uint256).tTransferAmount (#1125)
Variable BabyDogeZilla._transferToExcluded(address,address,uint256).rTransferAmount (#1125) is too similar to BabyDogeZilla._getValues(uint256).tTransferAmount (#908)
Variable BabyDogeZilla._transferToExcluded(address,address,uint256).rTransferAmount (#1125) is too similar to BabyDogeZilla._transferFromExcluded(address,address,uint256).tTransferAmount (#1135)
Variable BabyDogeZilla.reflectionFromToken(uint256,bool).rTransferAmount (#828) is too similar to BabyDogeZilla._getValues(uint256).tTransferAmount (#908)
Variable BabyDogeZilla.reflectionFromToken(uint256,bool).rTransferAmount (#828) is too similar to BabyDogeZilla._transferFromExcluded(address,address,uint256).tTransferAmount (#1135)
Variable BabyDogeZilla._getValues(uint256).rTransferAmount (#909) is too similar to BabyDogeZilla._transferBothExcluded(address,address,uint256).tTransferAmount (#862)
Variable BabyDogeZilla._transferFromExcluded(address,address,uint256).rTransferAmount (#1135) is too similar to BabyDogeZilla._transferBothExcluded(address,address,uint256).tTransferAmount (#862)
Variable BabyDogeZilla._getRValues(uint256,uint256,uint256,uint256).rTransferAmount (#924) is too similar to BabyDogeZilla._transferStandard(address,address,uint256).tTransferAmount (#1116)
Variable BabyDogeZilla._transferBothExcluded(address,address,uint256).rTransferAmount (#862) is too similar to BabyDogeZilla._getTValues(uint256).tTransferAmount (#916)
Variable BabyDogeZilla._getValues(uint256).rTransferAmount (#909) is too similar to BabyDogeZilla._getValues(uint256).tTransferAmount (#908)
Variable BabyDogeZilla._transferBothExcluded(address,address,uint256).rTransferAmount (#862) is too similar to BabyDogeZilla._getValues(uint256).tTransferAmount (#908)
Variable BabyDogeZilla._transferBothExcluded(address,address,uint256).rTransferAmount (#862) is too similar to BabyDogeZilla._transferFromExcluded(address,address,uint256).tTransferAmount (#1135)
Variable BabyDogeZilla._transferStandard(address,address,uint256).rTransferAmount (#1116) is too similar to BabyDogeZilla._getValues(uint256).tTransferAmount (#908)
Variable BabyDogeZilla._getValues(uint256).rTransferAmount (#909) is too similar to BabyDogeZilla._transferFromExcluded(address,address,uint256).tTransferAmount (#1135)
Variable BabyDogeZilla._transferStandard(address,address,uint256).rTransferAmount (#1116) is too similar to BabyDogeZilla._transferFromExcluded(address,address,uint256).tTransferAmount (#1135)
Variable BabyDogeZilla._getValues(uint256).rTransferAmount (#909) is too similar to BabyDogeZilla._transferToExcluded(address,address,uint256).tTransferAmount (#1125)
Variable BabyDogeZilla._transferBothExcluded(address,address,uint256).rTransferAmount (#862) is too similar to BabyDogeZilla._transferToExcluded(address,address,uint256).tTransferAmount (#1125)
Variable BabyDogeZilla._transferStandard(address,address,uint256).rTransferAmount (#1116) is too similar to BabyDogeZilla._transferToExcluded(address,address,uint256).tTransferAmount (#1125)
Variable BabyDogeZilla._getValues(uint256).rTransferAmount (#909) is too similar to BabyDogeZilla._transferStandard(address,address,uint256).tTransferAmount (#1116)
Variable BabyDogeZilla._transferBothExcluded(address,address,uint256).rTransferAmount (#862) is too similar to BabyDogeZilla._transferStandard(address,address,uint256).tTransferAmount (#1116)
Variable BabyDogeZilla._getRValues(uint256,uint256,uint256,uint256).rTransferAmount (#924) is too similar to BabyDogeZilla._getTValues(uint256).tTransferAmount (#916)
Variable BabyDogeZilla._getRValues(uint256,uint256,uint256,uint256).rTransferAmount (#924) is too similar to BabyDogeZilla._getValues(uint256).tTransferAmount (#908)
Variable BabyDogeZilla._getRValues(uint256,uint256,uint256,uint256).rTransferAmount (#924) is too similar to BabyDogeZilla._transferFromExcluded(address,address,uint256).tTransferAmount (#1135)
Variable BabyDogeZilla._getRValues(uint256,uint256,uint256,uint256).rTransferAmount (#924) is too similar to BabyDogeZilla._transferToExcluded(address,address,uint256).tTransferAmount (#1125)
Variable BabyDogeZilla._getRValues(uint256,uint256,uint256,uint256).rTransferAmount (#924) is too similar to BabyDogeZilla._transferBothExcluded(address,address,uint256).tTransferAmount (#862)
Prevent variables from having similar names.

Additional information: link

BabyDogeZilla.slitherConstructorVariables() (#685-1148) uses literals with too many digits:
- _tTotal = 69000000000000000000000 * 10 ** 9 (#699)
BabyDogeZilla.slitherConstructorVariables() (#685-1148) uses literals with too many digits:
- _maxTxAmount = 69000000000000000000000 * 10 ** 9 (#719)
BabyDogeZilla.slitherConstructorVariables() (#685-1148) uses literals with too many digits:
- numTokensSellToAddToLiquidity = 69000000000000000000000 * 10 ** 9 (#720)
Use: Ether suffix, Time suffix, or The scientific notation

Additional information: link

BabyDogeZilla._decimals (#705) should be constant
BabyDogeZilla._name (#703) should be constant
BabyDogeZilla._symbol (#704) should be constant
BabyDogeZilla._tTotal (#699) should be constant
BabyDogeZilla.numTokensSellToAddToLiquidity (#720) should be constant
Add the constant attributes to state variables that never change.

Additional information: link

renounceOwnership() should be declared external:
- Ownable.renounceOwnership() (#435-438)
transferOwnership(address) should be declared external:
- Ownable.transferOwnership(address) (#444-448)
geUnlockTime() should be declared external:
- Ownable.geUnlockTime() (#450-452)
lock(uint256) should be declared external:
- Ownable.lock(uint256) (#455-460)
unlock() should be declared external:
- Ownable.unlock() (#463-468)
name() should be declared external:
- BabyDogeZilla.name() (#754-756)
symbol() should be declared external:
- BabyDogeZilla.symbol() (#758-760)
decimals() should be declared external:
- BabyDogeZilla.decimals() (#762-764)
totalSupply() should be declared external:
- BabyDogeZilla.totalSupply() (#766-768)
transfer(address,uint256) should be declared external:
- BabyDogeZilla.transfer(address,uint256) (#775-778)
allowance(address,address) should be declared external:
- BabyDogeZilla.allowance(address,address) (#780-782)
approve(address,uint256) should be declared external:
- BabyDogeZilla.approve(address,uint256) (#784-787)
transferFrom(address,address,uint256) should be declared external:
- BabyDogeZilla.transferFrom(address,address,uint256) (#789-793)
increaseAllowance(address,uint256) should be declared external:
- BabyDogeZilla.increaseAllowance(address,uint256) (#795-798)
decreaseAllowance(address,uint256) should be declared external:
- BabyDogeZilla.decreaseAllowance(address,uint256) (#800-803)
isExcludedFromReward(address) should be declared external:
- BabyDogeZilla.isExcludedFromReward(address) (#805-807)
totalFees() should be declared external:
- BabyDogeZilla.totalFees() (#809-811)
deliver(uint256) should be declared external:
- BabyDogeZilla.deliver(uint256) (#813-820)
reflectionFromToken(uint256,bool) should be declared external:
- BabyDogeZilla.reflectionFromToken(uint256,bool) (#822-831)
excludeFromReward(address) should be declared external:
- BabyDogeZilla.excludeFromReward(address) (#839-847)
excludeFromFee(address) should be declared external:
- BabyDogeZilla.excludeFromFee(address) (#872-874)
includeInFee(address) should be declared external:
- BabyDogeZilla.includeInFee(address) (#876-878)
setSwapAndLiquifyEnabled(bool) should be declared external:
- BabyDogeZilla.setSwapAndLiquifyEnabled(bool) (#894-897)
isExcludedFromFee(address) should be declared external:
- BabyDogeZilla.isExcludedFromFee(address) (#980-982)
Use the external attribute for functions never called from the contract.

Additional information: link

BabyDogeZilla.allowance(address,address).owner (#780) shadows:
- Ownable.owner() (#416-418) (function)
BabyDogeZilla._approve(address,address,uint256).owner (#984) shadows:
- Ownable.owner() (#416-418) (function)
Rename the local variables that shadow another component.

Additional information: link

BabyDogeZilla.setTaxFeePercent(uint256) (#880-882) should emit an event for:
- _taxFee = taxFee (#881)
BabyDogeZilla.setLiquidityFeePercent(uint256) (#884-886) should emit an event for:
- _liquidityFee = liquidityFee (#885)
BabyDogeZilla.setMaxTxPercent(uint256) (#888-892) should emit an event for:
- _maxTxAmount = _tTotal.mul(maxTxPercent).div(10 ** 2) (#889-891)
Emit an event for critical parameter changes.

Additional information: link

Reentrancy in BabyDogeZilla._transfer(address,address,uint256) (#992-1036):
External calls:
- swapAndLiquify(contractTokenBalance) (#1023)
- uniswapV2Router.addLiquidityETH{value: ethAmount}(address(this),tokenAmount,0,0,owner(),block.timestamp) (#1084-1091)
- uniswapV2Router.swapExactTokensForETHSupportingFeeOnTransferTokens(tokenAmount,0,path,address(this),block.timestamp) (#1070-1076)
External calls sending eth:
- swapAndLiquify(contractTokenBalance) (#1023)
- uniswapV2Router.addLiquidityETH{value: ethAmount}(address(this),tokenAmount,0,0,owner(),block.timestamp) (#1084-1091)
State variables written after the call(s):
- _tokenTransfer(from,to,amount,takeFee) (#1035)
- _liquidityFee = _previousLiquidityFee (#977)
- _liquidityFee = 0 (#972)
- _tokenTransfer(from,to,amount,takeFee) (#1035)
- _previousLiquidityFee = _liquidityFee (#969)
- _tokenTransfer(from,to,amount,takeFee) (#1035)
- _previousTaxFee = _taxFee (#968)
- _tokenTransfer(from,to,amount,takeFee) (#1035)
- _tFeeTotal = _tFeeTotal.add(tFee) (#904)
- _tokenTransfer(from,to,amount,takeFee) (#1035)
- _taxFee = _previousTaxFee (#976)
- _taxFee = 0 (#971)
Reentrancy in BabyDogeZilla.constructor() (#736-752):
External calls:
- uniswapV2Pair = IUniswapV2Factory(_uniswapV2Router.factory()).createPair(address(this),_uniswapV2Router.WETH()) (#741-742)
State variables written after the call(s):
- _isExcludedFromFee[owner()] = true (#748)
- _isExcludedFromFee[address(this)] = true (#749)
- uniswapV2Router = _uniswapV2Router (#745)
Reentrancy in BabyDogeZilla.swapAndLiquify(uint256) (#1038-1059):
External calls:
- swapTokensForEth(half) (#1050)
- uniswapV2Router.swapExactTokensForETHSupportingFeeOnTransferTokens(tokenAmount,0,path,address(this),block.timestamp) (#1070-1076)
- addLiquidity(otherHalf,newBalance) (#1056)
- uniswapV2Router.addLiquidityETH{value: ethAmount}(address(this),tokenAmount,0,0,owner(),block.timestamp) (#1084-1091)
External calls sending eth:
- addLiquidity(otherHalf,newBalance) (#1056)
- uniswapV2Router.addLiquidityETH{value: ethAmount}(address(this),tokenAmount,0,0,owner(),block.timestamp) (#1084-1091)
State variables written after the call(s):
- addLiquidity(otherHalf,newBalance) (#1056)
- _allowances[owner][spender] = amount (#988)
Reentrancy in BabyDogeZilla.transferFrom(address,address,uint256) (#789-793):
External calls:
- _transfer(sender,recipient,amount) (#790)
- uniswapV2Router.addLiquidityETH{value: ethAmount}(address(this),tokenAmount,0,0,owner(),block.timestamp) (#1084-1091)
- uniswapV2Router.swapExactTokensForETHSupportingFeeOnTransferTokens(tokenAmount,0,path,address(this),block.timestamp) (#1070-1076)
External calls sending eth:
- _transfer(sender,recipient,amount) (#790)
- uniswapV2Router.addLiquidityETH{value: ethAmount}(address(this),tokenAmount,0,0,owner(),block.timestamp) (#1084-1091)
State variables written after the call(s):
- _approve(sender,_msgSender(),_allowances[sender][_msgSender()].sub(amount,ERC20: transfer amount exceeds allowance)) (#791)
- _allowances[owner][spender] = amount (#988)
Apply the check-effects-interactions pattern.

Additional information: link

Ownable.unlock() (#463-468) uses timestamp for comparisons
Dangerous comparisons:
- require(bool,string)(now > _lockTime,Contract is locked until 7 days) (#465)
Avoid relying on block.timestamp.

Additional information: link

Address.isContract(address) (#268-277) uses assembly
- INLINE ASM (#275)
Address._functionCallWithValue(address,bytes,uint256,string) (#361-382) uses assembly
- INLINE ASM (#374-377)
Do not use evm assembly.

Additional information: link

Address._functionCallWithValue(address,bytes,uint256,string) (#361-382) is never used and should be removed
Address.functionCall(address,bytes) (#321-323) is never used and should be removed
Address.functionCall(address,bytes,string) (#331-333) is never used and should be removed
Address.functionCallWithValue(address,bytes,uint256) (#346-348) is never used and should be removed
Address.functionCallWithValue(address,bytes,uint256,string) (#356-359) is never used and should be removed
Address.isContract(address) (#268-277) is never used and should be removed
Address.sendValue(address,uint256) (#295-301) is never used and should be removed
Context._msgData() (#240-243) is never used and should be removed
SafeMath.mod(uint256,uint256) (#213-215) is never used and should be removed
SafeMath.mod(uint256,uint256,string) (#229-232) is never used and should be removed
Remove unused functions.

Additional information: link

Holders:


Token is deployed only at one blockchain


Token has only one trading pair


Average 30d number of PancakeSwap swaps is low.

Contract has 8% buy tax and 7% sell tax.
Taxes are low and contract ownership is renounced.


Unable to find Blog account (Reddit or Medium)


Unable to find Youtube account


Unable to find Discord account


BscScan page for the token does not contain additional info: website, socials, description, etc.

Additional information: link


Unable to find Twitter link on the website


Unable to find token on CoinHunt

Additional information: link


Unable to find code repository for the project


Young tokens have high risks of price dump / death


Young tokens have high risks of price dump / death


Token has relatively low CoinGecko rank


Token has relatively low CoinMarketCap rank


Young tokens have high risks of price dump / death

Price for BabyDogeZilla

News for BabyDogeZilla