Then you will fall in love with Angry Doge
Group: https://t.co/V09PS9Ny1E
Announcement: https://t.co/NZBMMWSc6l
#AngryDoge #ANDO
Unable to find manual contract audit (e.g. Certik, PeckShield, Solidity...)
Token.addLiquidity(uint256,uint256) (#1087-1100) sends eth to arbitrary user
Dangerous calls:
- uniswapV2Router.addLiquidityETH{value: ethAmount}(address(this),tokenAmount,0,0,owner(),block.timestamp) (#1092-1099)
Ensure that an arbitrary user cannot withdraw unauthorized funds.
Additional information: link
Reentrancy in Token._transfer(address,address,uint256) (#1000-1044):
External calls:
- swapAndLiquify(contractTokenBalance) (#1031)
- uniswapV2Router.addLiquidityETH{value: ethAmount}(address(this),tokenAmount,0,0,owner(),block.timestamp) (#1092-1099)
- uniswapV2Router.swapExactTokensForETHSupportingFeeOnTransferTokens(tokenAmount,0,path,address(this),block.timestamp) (#1078-1084)
External calls sending eth:
- swapAndLiquify(contractTokenBalance) (#1031)
- uniswapV2Router.addLiquidityETH{value: ethAmount}(address(this),tokenAmount,0,0,owner(),block.timestamp) (#1092-1099)
State variables written after the call(s):
- _tokenTransfer(from,to,amount,takeFee) (#1043)
- _rOwned[address(this)] = _rOwned[address(this)].add(rLiquidity) (#951)
- _rOwned[sender] = _rOwned[sender].sub(rAmount) (#1125)
- _rOwned[sender] = _rOwned[sender].sub(rAmount) (#1134)
- _rOwned[recipient] = _rOwned[recipient].add(rTransferAmount) (#1126)
- _rOwned[sender] = _rOwned[sender].sub(rAmount) (#865)
- _rOwned[sender] = _rOwned[sender].sub(rAmount) (#1145)
- _rOwned[recipient] = _rOwned[recipient].add(rTransferAmount) (#1146)
- _rOwned[recipient] = _rOwned[recipient].add(rTransferAmount) (#1136)
- _rOwned[recipient] = _rOwned[recipient].add(rTransferAmount) (#867)
- _tokenTransfer(from,to,amount,takeFee) (#1043)
- _rTotal = _rTotal.sub(rFee) (#906)
- _tokenTransfer(from,to,amount,takeFee) (#1043)
- _tOwned[address(this)] = _tOwned[address(this)].add(tLiquidity) (#953)
- _tOwned[sender] = _tOwned[sender].sub(tAmount) (#864)
- _tOwned[sender] = _tOwned[sender].sub(tAmount) (#1144)
- _tOwned[recipient] = _tOwned[recipient].add(tTransferAmount) (#1135)
- _tOwned[recipient] = _tOwned[recipient].add(tTransferAmount) (#866)
Apply the check-effects-interactions pattern.
Additional information: link
Combination 1: Reentrancy vulnerabilities + Functions that send Ether to arbitraty destination. Usual for scams. May be justified by some complex mechanics (e.g. rebase, reflections). DYOR & manual audit are advised.
Token.addLiquidity(uint256,uint256) (#1087-1100) ignores return value by uniswapV2Router.addLiquidityETH{value: ethAmount}(address(this),tokenAmount,0,0,owner(),block.timestamp) (#1092-1099)
Ensure that all the return values of the function calls are used.
Additional information: link
Token.allowance(address,address).owner (#781) shadows:
- Ownable.owner() (#405-407) (function)
Token._approve(address,address,uint256).owner (#992) shadows:
- Ownable.owner() (#405-407) (function)
Rename the local variables that shadow another component.
Additional information: link
Token.setTaxFeePercent(uint256) (#881-883) should emit an event for:
- _taxFee = taxFee (#882)
Token.setLiquidityFeePercent(uint256) (#885-887) should emit an event for:
- _liquidityFee = liquidityFee (#886)
Token.setNumTokensSellToAddToLiquidity(uint256) (#889-891) should emit an event for:
- numTokensSellToAddToLiquidity = swapNumber * 10 ** _decimals (#890)
Token.setMaxTxPercent(uint256) (#893-895) should emit an event for:
- _maxTxAmount = maxTxPercent * 10 ** _decimals (#894)
Emit an event for critical parameter changes.
Additional information: link
Token.constructor(string,string,uint256,uint256,uint256,uint256,uint256,uint256,address,address).tokenOwner (#722) lacks a zero-check on :
- _owner = tokenOwner (#750)
Check that the address is not zero.
Additional information: link
Reentrancy in Token._transfer(address,address,uint256) (#1000-1044):
External calls:
- swapAndLiquify(contractTokenBalance) (#1031)
- uniswapV2Router.addLiquidityETH{value: ethAmount}(address(this),tokenAmount,0,0,owner(),block.timestamp) (#1092-1099)
- uniswapV2Router.swapExactTokensForETHSupportingFeeOnTransferTokens(tokenAmount,0,path,address(this),block.timestamp) (#1078-1084)
External calls sending eth:
- swapAndLiquify(contractTokenBalance) (#1031)
- uniswapV2Router.addLiquidityETH{value: ethAmount}(address(this),tokenAmount,0,0,owner(),block.timestamp) (#1092-1099)
State variables written after the call(s):
- _tokenTransfer(from,to,amount,takeFee) (#1043)
- _liquidityFee = _previousLiquidityFee (#985)
- _liquidityFee = 0 (#980)
- _tokenTransfer(from,to,amount,takeFee) (#1043)
- _previousLiquidityFee = _liquidityFee (#977)
- _tokenTransfer(from,to,amount,takeFee) (#1043)
- _previousTaxFee = _taxFee (#976)
- _tokenTransfer(from,to,amount,takeFee) (#1043)
- _tFeeTotal = _tFeeTotal.add(tFee) (#907)
- _tokenTransfer(from,to,amount,takeFee) (#1043)
- _taxFee = _previousTaxFee (#984)
- _taxFee = 0 (#979)
Reentrancy in Token.constructor(string,string,uint256,uint256,uint256,uint256,uint256,uint256,address,address) (#722-752):
External calls:
- uniswapV2Pair = IUniswapV2Factory(_uniswapV2Router.factory()).createPair(address(this),_uniswapV2Router.WETH()) (#740-741)
State variables written after the call(s):
- _isExcludedFromFee[tokenOwner] = true (#747)
- _isExcludedFromFee[address(this)] = true (#748)
- _owner = tokenOwner (#750)
- uniswapV2Router = _uniswapV2Router (#744)
Reentrancy in Token.swapAndLiquify(uint256) (#1046-1067):
External calls:
- swapTokensForEth(half) (#1058)
- uniswapV2Router.swapExactTokensForETHSupportingFeeOnTransferTokens(tokenAmount,0,path,address(this),block.timestamp) (#1078-1084)
- addLiquidity(otherHalf,newBalance) (#1064)
- uniswapV2Router.addLiquidityETH{value: ethAmount}(address(this),tokenAmount,0,0,owner(),block.timestamp) (#1092-1099)
External calls sending eth:
- addLiquidity(otherHalf,newBalance) (#1064)
- uniswapV2Router.addLiquidityETH{value: ethAmount}(address(this),tokenAmount,0,0,owner(),block.timestamp) (#1092-1099)
State variables written after the call(s):
- addLiquidity(otherHalf,newBalance) (#1064)
- _allowances[owner][spender] = amount (#996)
Reentrancy in Token.transferFrom(address,address,uint256) (#790-794):
External calls:
- _transfer(sender,recipient,amount) (#791)
- uniswapV2Router.addLiquidityETH{value: ethAmount}(address(this),tokenAmount,0,0,owner(),block.timestamp) (#1092-1099)
- uniswapV2Router.swapExactTokensForETHSupportingFeeOnTransferTokens(tokenAmount,0,path,address(this),block.timestamp) (#1078-1084)
External calls sending eth:
- _transfer(sender,recipient,amount) (#791)
- uniswapV2Router.addLiquidityETH{value: ethAmount}(address(this),tokenAmount,0,0,owner(),block.timestamp) (#1092-1099)
State variables written after the call(s):
- _approve(sender,_msgSender(),_allowances[sender][_msgSender()].sub(amount,ERC20: transfer amount exceeds allowance)) (#792)
- _allowances[owner][spender] = amount (#996)
Apply the check-effects-interactions pattern.
Additional information: link
Reentrancy in Token._transfer(address,address,uint256) (#1000-1044):
External calls:
- swapAndLiquify(contractTokenBalance) (#1031)
- uniswapV2Router.addLiquidityETH{value: ethAmount}(address(this),tokenAmount,0,0,owner(),block.timestamp) (#1092-1099)
- uniswapV2Router.swapExactTokensForETHSupportingFeeOnTransferTokens(tokenAmount,0,path,address(this),block.timestamp) (#1078-1084)
External calls sending eth:
- swapAndLiquify(contractTokenBalance) (#1031)
- uniswapV2Router.addLiquidityETH{value: ethAmount}(address(this),tokenAmount,0,0,owner(),block.timestamp) (#1092-1099)
Event emitted after the call(s):
- Transfer(sender,recipient,tTransferAmount) (#1129)
- _tokenTransfer(from,to,amount,takeFee) (#1043)
- Transfer(sender,recipient,tTransferAmount) (#1149)
- _tokenTransfer(from,to,amount,takeFee) (#1043)
- Transfer(sender,recipient,tTransferAmount) (#1139)
- _tokenTransfer(from,to,amount,takeFee) (#1043)
- Transfer(sender,recipient,tTransferAmount) (#870)
- _tokenTransfer(from,to,amount,takeFee) (#1043)
Reentrancy in Token.constructor(string,string,uint256,uint256,uint256,uint256,uint256,uint256,address,address) (#722-752):
External calls:
- uniswapV2Pair = IUniswapV2Factory(_uniswapV2Router.factory()).createPair(address(this),_uniswapV2Router.WETH()) (#740-741)
Event emitted after the call(s):
- Transfer(address(0),tokenOwner,_tTotal) (#751)
Reentrancy in Token.swapAndLiquify(uint256) (#1046-1067):
External calls:
- swapTokensForEth(half) (#1058)
- uniswapV2Router.swapExactTokensForETHSupportingFeeOnTransferTokens(tokenAmount,0,path,address(this),block.timestamp) (#1078-1084)
- addLiquidity(otherHalf,newBalance) (#1064)
- uniswapV2Router.addLiquidityETH{value: ethAmount}(address(this),tokenAmount,0,0,owner(),block.timestamp) (#1092-1099)
External calls sending eth:
- addLiquidity(otherHalf,newBalance) (#1064)
- uniswapV2Router.addLiquidityETH{value: ethAmount}(address(this),tokenAmount,0,0,owner(),block.timestamp) (#1092-1099)
Event emitted after the call(s):
- Approval(owner,spender,amount) (#997)
- addLiquidity(otherHalf,newBalance) (#1064)
- SwapAndLiquify(half,newBalance,otherHalf) (#1066)
Reentrancy in Token.transferFrom(address,address,uint256) (#790-794):
External calls:
- _transfer(sender,recipient,amount) (#791)
- uniswapV2Router.addLiquidityETH{value: ethAmount}(address(this),tokenAmount,0,0,owner(),block.timestamp) (#1092-1099)
- uniswapV2Router.swapExactTokensForETHSupportingFeeOnTransferTokens(tokenAmount,0,path,address(this),block.timestamp) (#1078-1084)
External calls sending eth:
- _transfer(sender,recipient,amount) (#791)
- uniswapV2Router.addLiquidityETH{value: ethAmount}(address(this),tokenAmount,0,0,owner(),block.timestamp) (#1092-1099)
Event emitted after the call(s):
- Approval(owner,spender,amount) (#997)
- _approve(sender,_msgSender(),_allowances[sender][_msgSender()].sub(amount,ERC20: transfer amount exceeds allowance)) (#792)
Apply the check-effects-interactions pattern.
Additional information: link
Ownable.unlock() (#452-457) uses timestamp for comparisons
Dangerous comparisons:
- require(bool,string)(now > _lockTime,Contract is locked until 7 days) (#454)
Avoid relying on block.timestamp.
Additional information: link
Address.isContract(address) (#265-274) uses assembly
- INLINE ASM (#272)
Address._functionCallWithValue(address,bytes,uint256,string) (#358-379) uses assembly
- INLINE ASM (#371-374)
Do not use evm assembly.
Additional information: link
Token.includeInReward(address) (#850-861) has costly operations inside a loop:
- _excluded.pop() (#857)
Use a local variable to hold the loop computation result.
Additional information: link
Address._functionCallWithValue(address,bytes,uint256,string) (#358-379) is never used and should be removed
Address.functionCall(address,bytes) (#318-320) is never used and should be removed
Address.functionCall(address,bytes,string) (#328-330) is never used and should be removed
Address.functionCallWithValue(address,bytes,uint256) (#343-345) is never used and should be removed
Address.functionCallWithValue(address,bytes,uint256,string) (#353-356) is never used and should be removed
Address.isContract(address) (#265-274) is never used and should be removed
Address.sendValue(address,uint256) (#292-298) is never used and should be removed
Context._msgData() (#238-241) is never used and should be removed
SafeMath.mod(uint256,uint256) (#211-213) is never used and should be removed
SafeMath.mod(uint256,uint256,string) (#227-230) is never used and should be removed
Remove unused functions.
Additional information: link
Low level call in Address.sendValue(address,uint256) (#292-298):
- (success) = recipient.call{value: amount}() (#296)
Low level call in Address._functionCallWithValue(address,bytes,uint256,string) (#358-379):
- (success,returndata) = target.call{value: weiValue}(data) (#362)
Avoid low-level calls. Check the call success. If the call is meant for a contract, check for code existence
Additional information: link
Variable Ownable._owner (#395) is not in mixedCase
Function IUniswapV2Pair.DOMAIN_SEPARATOR() (#495) is not in mixedCase
Function IUniswapV2Pair.PERMIT_TYPEHASH() (#496) is not in mixedCase
Function IUniswapV2Pair.MINIMUM_LIQUIDITY() (#513) is not in mixedCase
Function IUniswapV2Router01.WETH() (#535) is not in mixedCase
Parameter Token.setSwapAndLiquifyEnabled(bool)._enabled (#897) is not in mixedCase
Parameter Token.calculateTaxFee(uint256)._amount (#961) is not in mixedCase
Parameter Token.calculateLiquidityFee(uint256)._amount (#967) is not in mixedCase
Variable Token._taxFee (#693) is not in mixedCase
Variable Token._liquidityFee (#696) is not in mixedCase
Variable Token._maxTxAmount (#705) is not in mixedCase
Follow the Solidity naming convention.
Additional information: link
Redundant expression "this (#239)" inContext (#233-242)
Remove redundant statements if they congest code but offer no value.
Additional information: link
Variable IUniswapV2Router01.addLiquidity(address,address,uint256,uint256,uint256,uint256,address,uint256).amountADesired (#540) is too similar to IUniswapV2Router01.addLiquidity(address,address,uint256,uint256,uint256,uint256,address,uint256).amountBDesired (#541)
Variable Token._getValues(uint256).rTransferAmount (#912) is too similar to Token._transferStandard(address,address,uint256).tTransferAmount (#1124)
Variable Token._getRValues(uint256,uint256,uint256,uint256).rTransferAmount (#927) is too similar to Token._transferBothExcluded(address,address,uint256).tTransferAmount (#863)
Variable Token._getValues(uint256).rTransferAmount (#912) is too similar to Token._getTValues(uint256).tTransferAmount (#919)
Variable Token._transferToExcluded(address,address,uint256).rTransferAmount (#1133) is too similar to Token._transferToExcluded(address,address,uint256).tTransferAmount (#1133)
Variable Token.reflectionFromToken(uint256,bool).rTransferAmount (#829) is too similar to Token._transferToExcluded(address,address,uint256).tTransferAmount (#1133)
Variable Token._transferToExcluded(address,address,uint256).rTransferAmount (#1133) is too similar to Token._transferBothExcluded(address,address,uint256).tTransferAmount (#863)
Variable Token._getRValues(uint256,uint256,uint256,uint256).rTransferAmount (#927) is too similar to Token._transferStandard(address,address,uint256).tTransferAmount (#1124)
Variable Token.reflectionFromToken(uint256,bool).rTransferAmount (#829) is too similar to Token._transferBothExcluded(address,address,uint256).tTransferAmount (#863)
Variable Token._getRValues(uint256,uint256,uint256,uint256).rTransferAmount (#927) is too similar to Token._getTValues(uint256).tTransferAmount (#919)
Variable Token._transferFromExcluded(address,address,uint256).rTransferAmount (#1143) is too similar to Token._transferToExcluded(address,address,uint256).tTransferAmount (#1133)
Variable Token._transferFromExcluded(address,address,uint256).rTransferAmount (#1143) is too similar to Token._getValues(uint256).tTransferAmount (#911)
Variable Token._transferToExcluded(address,address,uint256).rTransferAmount (#1133) is too similar to Token._transferStandard(address,address,uint256).tTransferAmount (#1124)
Variable Token.reflectionFromToken(uint256,bool).rTransferAmount (#829) is too similar to Token._transferStandard(address,address,uint256).tTransferAmount (#1124)
Variable Token._transferFromExcluded(address,address,uint256).rTransferAmount (#1143) is too similar to Token._transferBothExcluded(address,address,uint256).tTransferAmount (#863)
Variable Token._transferToExcluded(address,address,uint256).rTransferAmount (#1133) is too similar to Token._getTValues(uint256).tTransferAmount (#919)
Variable Token.reflectionFromToken(uint256,bool).rTransferAmount (#829) is too similar to Token._getTValues(uint256).tTransferAmount (#919)
Variable Token._transferStandard(address,address,uint256).rTransferAmount (#1124) is too similar to Token._transferStandard(address,address,uint256).tTransferAmount (#1124)
Variable Token._transferFromExcluded(address,address,uint256).rTransferAmount (#1143) is too similar to Token._transferStandard(address,address,uint256).tTransferAmount (#1124)
Variable Token._transferFromExcluded(address,address,uint256).rTransferAmount (#1143) is too similar to Token._getTValues(uint256).tTransferAmount (#919)
Variable Token._transferBothExcluded(address,address,uint256).rTransferAmount (#863) is too similar to Token._transferBothExcluded(address,address,uint256).tTransferAmount (#863)
Variable Token._getValues(uint256).rTransferAmount (#912) is too similar to Token._transferToExcluded(address,address,uint256).tTransferAmount (#1133)
Variable Token._getValues(uint256).rTransferAmount (#912) is too similar to Token._transferBothExcluded(address,address,uint256).tTransferAmount (#863)
Variable Token._transferFromExcluded(address,address,uint256).rTransferAmount (#1143) is too similar to Token._transferFromExcluded(address,address,uint256).tTransferAmount (#1143)
Variable Token._transferBothExcluded(address,address,uint256).rTransferAmount (#863) is too similar to Token._transferStandard(address,address,uint256).tTransferAmount (#1124)
Variable Token._getRValues(uint256,uint256,uint256,uint256).rTransferAmount (#927) is too similar to Token._transferToExcluded(address,address,uint256).tTransferAmount (#1133)
Variable Token._transferBothExcluded(address,address,uint256).rTransferAmount (#863) is too similar to Token._getTValues(uint256).tTransferAmount (#919)
Variable Token._getValues(uint256).rTransferAmount (#912) is too similar to Token._transferFromExcluded(address,address,uint256).tTransferAmount (#1143)
Variable Token._transferToExcluded(address,address,uint256).rTransferAmount (#1133) is too similar to Token._getValues(uint256).tTransferAmount (#911)
Variable Token._transferStandard(address,address,uint256).rTransferAmount (#1124) is too similar to Token._getTValues(uint256).tTransferAmount (#919)
Variable Token._transferBothExcluded(address,address,uint256).rTransferAmount (#863) is too similar to Token._getValues(uint256).tTransferAmount (#911)
Variable Token._transferStandard(address,address,uint256).rTransferAmount (#1124) is too similar to Token._transferBothExcluded(address,address,uint256).tTransferAmount (#863)
Variable Token._transferStandard(address,address,uint256).rTransferAmount (#1124) is too similar to Token._getValues(uint256).tTransferAmount (#911)
Variable Token._getRValues(uint256,uint256,uint256,uint256).rTransferAmount (#927) is too similar to Token._getValues(uint256).tTransferAmount (#911)
Variable Token._transferBothExcluded(address,address,uint256).rTransferAmount (#863) is too similar to Token._transferToExcluded(address,address,uint256).tTransferAmount (#1133)
Variable Token._transferToExcluded(address,address,uint256).rTransferAmount (#1133) is too similar to Token._transferFromExcluded(address,address,uint256).tTransferAmount (#1143)
Variable Token._transferBothExcluded(address,address,uint256).rTransferAmount (#863) is too similar to Token._transferFromExcluded(address,address,uint256).tTransferAmount (#1143)
Variable Token._transferStandard(address,address,uint256).rTransferAmount (#1124) is too similar to Token._transferToExcluded(address,address,uint256).tTransferAmount (#1133)
Variable Token.reflectionFromToken(uint256,bool).rTransferAmount (#829) is too similar to Token._getValues(uint256).tTransferAmount (#911)
Variable Token._getValues(uint256).rTransferAmount (#912) is too similar to Token._getValues(uint256).tTransferAmount (#911)
Variable Token._transferStandard(address,address,uint256).rTransferAmount (#1124) is too similar to Token._transferFromExcluded(address,address,uint256).tTransferAmount (#1143)
Variable Token._getRValues(uint256,uint256,uint256,uint256).rTransferAmount (#927) is too similar to Token._transferFromExcluded(address,address,uint256).tTransferAmount (#1143)
Variable Token.reflectionFromToken(uint256,bool).rTransferAmount (#829) is too similar to Token._transferFromExcluded(address,address,uint256).tTransferAmount (#1143)
Prevent variables from having similar names.
Additional information: link
renounceOwnership() should be declared external:
- Ownable.renounceOwnership() (#424-427)
transferOwnership(address) should be declared external:
- Ownable.transferOwnership(address) (#433-437)
geUnlockTime() should be declared external:
- Ownable.geUnlockTime() (#439-441)
lock(uint256) should be declared external:
- Ownable.lock(uint256) (#444-449)
unlock() should be declared external:
- Ownable.unlock() (#452-457)
name() should be declared external:
- Token.name() (#755-757)
symbol() should be declared external:
- Token.symbol() (#759-761)
decimals() should be declared external:
- Token.decimals() (#763-765)
totalSupply() should be declared external:
- Token.totalSupply() (#767-769)
transfer(address,uint256) should be declared external:
- Token.transfer(address,uint256) (#776-779)
allowance(address,address) should be declared external:
- Token.allowance(address,address) (#781-783)
approve(address,uint256) should be declared external:
- Token.approve(address,uint256) (#785-788)
transferFrom(address,address,uint256) should be declared external:
- Token.transferFrom(address,address,uint256) (#790-794)
increaseAllowance(address,uint256) should be declared external:
- Token.increaseAllowance(address,uint256) (#796-799)
decreaseAllowance(address,uint256) should be declared external:
- Token.decreaseAllowance(address,uint256) (#801-804)
isExcludedFromReward(address) should be declared external:
- Token.isExcludedFromReward(address) (#806-808)
totalFees() should be declared external:
- Token.totalFees() (#810-812)
deliver(uint256) should be declared external:
- Token.deliver(uint256) (#814-821)
reflectionFromToken(uint256,bool) should be declared external:
- Token.reflectionFromToken(uint256,bool) (#823-832)
excludeFromReward(address) should be declared external:
- Token.excludeFromReward(address) (#840-848)
excludeFromFee(address) should be declared external:
- Token.excludeFromFee(address) (#873-875)
includeInFee(address) should be declared external:
- Token.includeInFee(address) (#877-879)
setNumTokensSellToAddToLiquidity(uint256) should be declared external:
- Token.setNumTokensSellToAddToLiquidity(uint256) (#889-891)
setMaxTxPercent(uint256) should be declared external:
- Token.setMaxTxPercent(uint256) (#893-895)
setSwapAndLiquifyEnabled(bool) should be declared external:
- Token.setSwapAndLiquifyEnabled(bool) (#897-900)
claimTokens() should be declared external:
- Token.claimTokens() (#957-959)
isExcludedFromFee(address) should be declared external:
- Token.isExcludedFromFee(address) (#988-990)
Use the external attribute for functions never called from the contract.
Additional information: link
BscScan page for the token does not contain additional info: website, socials, description, etc.
Additional information: link
Unable to find token/project description on the website or on BscScan, CoinMarketCap
Unable to find token contract audit
Unable to find audit link on the website
Unable to find whitepaper link on the website
Unable to find token on CoinGecko
Additional information: link
Unable to find token on CoinMarketCap
Additional information: link
Unable to find token on CoinHunt
Additional information: link
Young tokens have high risks of scam / price dump / death
Young tokens have high risks of scam / price dump / death
Token has no active CoinGecko listing / rank
Token has no active CoinMarketCap listing / rank
Telegram account has less than 100 subscribers
Twitter account has less than 100 followers
Unable to find Blog account (Reddit or Medium)
Unable to find Youtube account
Unable to find Discord account