$TAJI [TomAndJerry Inu] Token

Unable to find manual contract audit (e.g. Certik, PeckShield, Solidity...)

TomAndJerryInu.addLiquidity(uint256,uint256) (#575-588) sends eth to arbitrary user
Dangerous calls:
- router.addLiquidityETH{value: bnbAmount}(address(this),tokenAmount,0,0,owner(),block.timestamp) (#580-587)
Ensure that an arbitrary user cannot withdraw unauthorized funds.

Additional information: link

Reentrancy in TomAndJerryInu._transfer(address,address,uint256) (#471-518):
External calls:
- swapAndLiquify(swapTokensAtAmount,sellTaxes) (#509)
- router.addLiquidityETH{value: bnbAmount}(address(this),tokenAmount,0,0,owner(),block.timestamp) (#580-587)
- (success) = recipient.call{value: amount}() (#105)
- router.swapExactTokensForETHSupportingFeeOnTransferTokens(tokenAmount,0,path,address(this),block.timestamp) (#599-605)
- address(marketingWallet).sendValue(marketingAmt) (#567)
- address(developmentWallet).sendValue(developmentAmt) (#571)
- swapAndLiquify(swapTokensAtAmount,taxes) (#510)
- router.addLiquidityETH{value: bnbAmount}(address(this),tokenAmount,0,0,owner(),block.timestamp) (#580-587)
- (success) = recipient.call{value: amount}() (#105)
- router.swapExactTokensForETHSupportingFeeOnTransferTokens(tokenAmount,0,path,address(this),block.timestamp) (#599-605)
- address(marketingWallet).sendValue(marketingAmt) (#567)
- address(developmentWallet).sendValue(developmentAmt) (#571)
External calls sending eth:
- swapAndLiquify(swapTokensAtAmount,sellTaxes) (#509)
- router.addLiquidityETH{value: bnbAmount}(address(this),tokenAmount,0,0,owner(),block.timestamp) (#580-587)
- (success) = recipient.call{value: amount}() (#105)
- swapAndLiquify(swapTokensAtAmount,taxes) (#510)
- router.addLiquidityETH{value: bnbAmount}(address(this),tokenAmount,0,0,owner(),block.timestamp) (#580-587)
- (success) = recipient.call{value: amount}() (#105)
State variables written after the call(s):
- _tokenTransfer(from,to,amount,takeFee,isSell) (#517)
- _rOwned[address(this)] += rMarketing (#382)
- _rOwned[address(this)] += rLiquidity (#372)
- _rOwned[address(this)] += rdevelopment (#392)
- _rOwned[sender] = _rOwned[sender] - s.rAmount (#533)
- _rOwned[recipient] = _rOwned[recipient] + s.rTransferAmount (#534)
- _tokenTransfer(from,to,amount,takeFee,isSell) (#517)
- _rTotal -= rbuyback (#361)
- _tokenTransfer(from,to,amount,takeFee,isSell) (#517)
- _tOwned[address(this)] += tLiquidity (#370)
- _tOwned[sender] = _tOwned[sender] - tAmount (#527)
- _tOwned[address(this)] += tdevelopment (#390)
- _tOwned[address(this)] += tMarketing (#380)
- _tOwned[recipient] = _tOwned[recipient] + s.tTransferAmount (#530)
Apply the check-effects-interactions pattern.

Additional information: link

TomAndJerryInu.rescueAnyBEP20Tokens(address,address,uint256) (#679-681) ignores return value by IERC20(_tokenAddr).transfer(_to,_amount) (#680)
Use SafeERC20, or ensure that the transfer/transferFrom return value is checked.

Additional information: link

Contract ownership is not renounced (belongs to a wallet)

Combination 1: Reentrancy vulnerabilities + Functions that send Ether to arbitraty destination. Usual for scams. May be justified by some complex mechanics (e.g. rebase, reflections). DYOR & manual audit are advised.

Combination 2: Unchecked transfer + Functions that send Ether to arbitraty destination. Usual for scams. May be justified by some complex mechanics (e.g. rebase, reflections). DYOR & manual audit are advised.

Combination 3: Reentrancy vulnerabilities + Unchecked transfer vulnerability. Usual for scams. May be justified by some complex mechanics (e.g. rebase, reflections). DYOR & manual audit are advised.

Contract ticker ($TAJI) contains non-alphanumeric characters.
Not a direct threat, but may indicate unreliable intentions of developer. Non-alphanumeric chars (,.;!#*&") are extremely rare among low risk tokens.

Not a direct threat, but may indicate unreliable intentions of developer. Widespread names (e.g. Elon, King, Moon, Doge) are common among meme-tokens and scams. The allow to gain free hype and attract unexperienced investors.

TomAndJerryInu.swapAndLiquify(uint256,TomAndJerryInu.Taxes) (#547-573) performs a multiplication on the result of a division:
-unitBalance = deltaBalance / (denominator - temp.liquidity) (#557)
-bnbToAddLiquidityWith = unitBalance * temp.liquidity (#558)
TomAndJerryInu.swapAndLiquify(uint256,TomAndJerryInu.Taxes) (#547-573) performs a multiplication on the result of a division:
-unitBalance = deltaBalance / (denominator - temp.liquidity) (#557)
-marketingAmt = unitBalance * 2 * temp.marketing (#565)
TomAndJerryInu.swapAndLiquify(uint256,TomAndJerryInu.Taxes) (#547-573) performs a multiplication on the result of a division:
-unitBalance = deltaBalance / (denominator - temp.liquidity) (#557)
-developmentAmt = unitBalance * 2 * temp.development (#569)
Consider ordering multiplication before division.

Additional information: link

TomAndJerryInu.addLiquidity(uint256,uint256) (#575-588) ignores return value by router.addLiquidityETH{value: bnbAmount}(address(this),tokenAmount,0,0,owner(),block.timestamp) (#580-587)
Ensure that all the return values of the function calls are used.

Additional information: link

TomAndJerryInu.allowance(address,address).owner (#251) shadows:
- Ownable.owner() (#52-54) (function)
TomAndJerryInu._approve(address,address,uint256).owner (#464) shadows:
- Ownable.owner() (#52-54) (function)
Rename the local variables that shadow another component.

Additional information: link

TomAndJerryInu.updateCooldown(bool,uint256) (#630-633) should emit an event for:
- coolDownTime = time * 1 (#631)
TomAndJerryInu.updateSwapTokensAtAmount(uint256) (#635-637) should emit an event for:
- swapTokensAtAmount = amount * 10 ** _decimals (#636)
TomAndJerryInu.updateMaxTxLimit(uint256,uint256) (#658-661) should emit an event for:
- maxBuyLimit = maxBuy * 10 ** decimals() (#659)
- maxSellLimit = maxSell * 10 ** decimals() (#660)
TomAndJerryInu.updateMaxWalletlimit(uint256) (#663-665) should emit an event for:
- maxWalletLimit = amount * 10 ** decimals() (#664)
Emit an event for critical parameter changes.

Additional information: link

TomAndJerryInu.constructor(address)._pair (#207-208) lacks a zero-check on :
- pair = _pair (#211)
TomAndJerryInu.updateMarketingWallet(address).newWallet (#621) lacks a zero-check on :
- marketingWallet = newWallet (#622)
TomAndJerryInu.updatedevelopmentWallet(address).newWallet (#625) lacks a zero-check on :
- developmentWallet = newWallet (#626)
TomAndJerryInu.updateRouterAndPair(address,address).newPair (#667) lacks a zero-check on :
- pair = newPair (#669)
Check that the address is not zero.

Additional information: link

Reentrancy in TomAndJerryInu._transfer(address,address,uint256) (#471-518):
External calls:
- swapAndLiquify(swapTokensAtAmount,sellTaxes) (#509)
- router.addLiquidityETH{value: bnbAmount}(address(this),tokenAmount,0,0,owner(),block.timestamp) (#580-587)
- (success) = recipient.call{value: amount}() (#105)
- router.swapExactTokensForETHSupportingFeeOnTransferTokens(tokenAmount,0,path,address(this),block.timestamp) (#599-605)
- address(marketingWallet).sendValue(marketingAmt) (#567)
- address(developmentWallet).sendValue(developmentAmt) (#571)
- swapAndLiquify(swapTokensAtAmount,taxes) (#510)
- router.addLiquidityETH{value: bnbAmount}(address(this),tokenAmount,0,0,owner(),block.timestamp) (#580-587)
- (success) = recipient.call{value: amount}() (#105)
- router.swapExactTokensForETHSupportingFeeOnTransferTokens(tokenAmount,0,path,address(this),block.timestamp) (#599-605)
- address(marketingWallet).sendValue(marketingAmt) (#567)
- address(developmentWallet).sendValue(developmentAmt) (#571)
External calls sending eth:
- swapAndLiquify(swapTokensAtAmount,sellTaxes) (#509)
- router.addLiquidityETH{value: bnbAmount}(address(this),tokenAmount,0,0,owner(),block.timestamp) (#580-587)
- (success) = recipient.call{value: amount}() (#105)
- swapAndLiquify(swapTokensAtAmount,taxes) (#510)
- router.addLiquidityETH{value: bnbAmount}(address(this),tokenAmount,0,0,owner(),block.timestamp) (#580-587)
- (success) = recipient.call{value: amount}() (#105)
State variables written after the call(s):
- _tokenTransfer(from,to,amount,takeFee,isSell) (#517)
- totFeesPaid.liquidity += tLiquidity (#366)
- totFeesPaid.development += tdevelopment (#386)
- totFeesPaid.marketing += tMarketing (#376)
- totFeesPaid.buyback += tbuyback (#362)
Reentrancy in TomAndJerryInu.constructor(address) (#205-228):
External calls:
- _pair = IFactory(_router.factory()).createPair(address(this),_router.WETH()) (#207-208)
State variables written after the call(s):
- excludeFromReward(pair) (#213)
- _excluded.push(account) (#322)
- excludeFromReward(pair) (#213)
- _isExcluded[account] = true (#321)
- _isExcludedFromFee[address(this)] = true (#216)
- _isExcludedFromFee[owner()] = true (#217)
- _isExcludedFromFee[marketingWallet] = true (#218)
- _isExcludedFromFee[developmentWallet] = true (#219)
- _rOwned[owner()] = _rTotal (#215)
- excludeFromReward(pair) (#213)
- _tOwned[account] = tokenFromReflection(_rOwned[account]) (#319)
- allowedTransfer[address(this)] = true (#221)
- allowedTransfer[owner()] = true (#222)
- allowedTransfer[pair] = true (#223)
- allowedTransfer[marketingWallet] = true (#224)
- allowedTransfer[developmentWallet] = true (#225)
- pair = _pair (#211)
- router = _router (#210)
Reentrancy in TomAndJerryInu.swapAndLiquify(uint256,TomAndJerryInu.Taxes) (#547-573):
External calls:
- swapTokensForBNB(toSwap) (#554)
- router.swapExactTokensForETHSupportingFeeOnTransferTokens(tokenAmount,0,path,address(this),block.timestamp) (#599-605)
- addLiquidity(tokensToAddLiquidityWith,bnbToAddLiquidityWith) (#562)
- router.addLiquidityETH{value: bnbAmount}(address(this),tokenAmount,0,0,owner(),block.timestamp) (#580-587)
External calls sending eth:
- addLiquidity(tokensToAddLiquidityWith,bnbToAddLiquidityWith) (#562)
- router.addLiquidityETH{value: bnbAmount}(address(this),tokenAmount,0,0,owner(),block.timestamp) (#580-587)
State variables written after the call(s):
- addLiquidity(tokensToAddLiquidityWith,bnbToAddLiquidityWith) (#562)
- _allowances[owner][spender] = amount (#467)
Reentrancy in TomAndJerryInu.transferFrom(address,address,uint256) (#260-268):
External calls:
- _transfer(sender,recipient,amount) (#261)
- router.addLiquidityETH{value: bnbAmount}(address(this),tokenAmount,0,0,owner(),block.timestamp) (#580-587)
- (success) = recipient.call{value: amount}() (#105)
- router.swapExactTokensForETHSupportingFeeOnTransferTokens(tokenAmount,0,path,address(this),block.timestamp) (#599-605)
- address(marketingWallet).sendValue(marketingAmt) (#567)
- address(developmentWallet).sendValue(developmentAmt) (#571)
External calls sending eth:
- _transfer(sender,recipient,amount) (#261)
- router.addLiquidityETH{value: bnbAmount}(address(this),tokenAmount,0,0,owner(),block.timestamp) (#580-587)
- (success) = recipient.call{value: amount}() (#105)
State variables written after the call(s):
- _approve(sender,_msgSender(),currentAllowance - amount) (#265)
- _allowances[owner][spender] = amount (#467)
Apply the check-effects-interactions pattern.

Additional information: link

Reentrancy in TomAndJerryInu._transfer(address,address,uint256) (#471-518):
External calls:
- swapAndLiquify(swapTokensAtAmount,sellTaxes) (#509)
- router.addLiquidityETH{value: bnbAmount}(address(this),tokenAmount,0,0,owner(),block.timestamp) (#580-587)
- (success) = recipient.call{value: amount}() (#105)
- router.swapExactTokensForETHSupportingFeeOnTransferTokens(tokenAmount,0,path,address(this),block.timestamp) (#599-605)
- address(marketingWallet).sendValue(marketingAmt) (#567)
- address(developmentWallet).sendValue(developmentAmt) (#571)
- swapAndLiquify(swapTokensAtAmount,taxes) (#510)
- router.addLiquidityETH{value: bnbAmount}(address(this),tokenAmount,0,0,owner(),block.timestamp) (#580-587)
- (success) = recipient.call{value: amount}() (#105)
- router.swapExactTokensForETHSupportingFeeOnTransferTokens(tokenAmount,0,path,address(this),block.timestamp) (#599-605)
- address(marketingWallet).sendValue(marketingAmt) (#567)
- address(developmentWallet).sendValue(developmentAmt) (#571)
External calls sending eth:
- swapAndLiquify(swapTokensAtAmount,sellTaxes) (#509)
- router.addLiquidityETH{value: bnbAmount}(address(this),tokenAmount,0,0,owner(),block.timestamp) (#580-587)
- (success) = recipient.call{value: amount}() (#105)
- swapAndLiquify(swapTokensAtAmount,taxes) (#510)
- router.addLiquidityETH{value: bnbAmount}(address(this),tokenAmount,0,0,owner(),block.timestamp) (#580-587)
- (success) = recipient.call{value: amount}() (#105)
Event emitted after the call(s):
- Transfer(sender,address(this),s.tLiquidity + s.tMarketing + s.tdevelopment) (#539)
- _tokenTransfer(from,to,amount,takeFee,isSell) (#517)
- Transfer(sender,recipient,s.tTransferAmount) (#543)
- _tokenTransfer(from,to,amount,takeFee,isSell) (#517)
Reentrancy in TomAndJerryInu.constructor(address) (#205-228):
External calls:
- _pair = IFactory(_router.factory()).createPair(address(this),_router.WETH()) (#207-208)
Event emitted after the call(s):
- Transfer(address(0),owner(),_tTotal) (#227)
Reentrancy in TomAndJerryInu.swapAndLiquify(uint256,TomAndJerryInu.Taxes) (#547-573):
External calls:
- swapTokensForBNB(toSwap) (#554)
- router.swapExactTokensForETHSupportingFeeOnTransferTokens(tokenAmount,0,path,address(this),block.timestamp) (#599-605)
- addLiquidity(tokensToAddLiquidityWith,bnbToAddLiquidityWith) (#562)
- router.addLiquidityETH{value: bnbAmount}(address(this),tokenAmount,0,0,owner(),block.timestamp) (#580-587)
External calls sending eth:
- addLiquidity(tokensToAddLiquidityWith,bnbToAddLiquidityWith) (#562)
- router.addLiquidityETH{value: bnbAmount}(address(this),tokenAmount,0,0,owner(),block.timestamp) (#580-587)
Event emitted after the call(s):
- Approval(owner,spender,amount) (#468)
- addLiquidity(tokensToAddLiquidityWith,bnbToAddLiquidityWith) (#562)
Reentrancy in TomAndJerryInu.transferFrom(address,address,uint256) (#260-268):
External calls:
- _transfer(sender,recipient,amount) (#261)
- router.addLiquidityETH{value: bnbAmount}(address(this),tokenAmount,0,0,owner(),block.timestamp) (#580-587)
- (success) = recipient.call{value: amount}() (#105)
- router.swapExactTokensForETHSupportingFeeOnTransferTokens(tokenAmount,0,path,address(this),block.timestamp) (#599-605)
- address(marketingWallet).sendValue(marketingAmt) (#567)
- address(developmentWallet).sendValue(developmentAmt) (#571)
External calls sending eth:
- _transfer(sender,recipient,amount) (#261)
- router.addLiquidityETH{value: bnbAmount}(address(this),tokenAmount,0,0,owner(),block.timestamp) (#580-587)
- (success) = recipient.call{value: amount}() (#105)
Event emitted after the call(s):
- Approval(owner,spender,amount) (#468)
- _approve(sender,_msgSender(),currentAllowance - amount) (#265)
Apply the check-effects-interactions pattern.

Additional information: link

TomAndJerryInu._transfer(address,address,uint256) (#471-518) uses timestamp for comparisons
Dangerous comparisons:
- require(bool,string)(timePassed >= coolDownTime,Cooldown enabled) (#498)
Avoid relying on block.timestamp.

Additional information: link

TomAndJerryInu.setTradingStatus(bool) (#304-308) compares to a boolean constant:
-state == true && genesis_block == 0 (#307)
Remove the equality to the boolean constant.

Additional information: link

TomAndJerryInu.includeInReward(address) (#325-336) has costly operations inside a loop:
- _excluded.pop() (#332)
TomAndJerryInu._reflectbuyback(uint256,uint256) (#360-363) has costly operations inside a loop:
- _rTotal -= rbuyback (#361)
Use a local variable to hold the loop computation result.

Additional information: link

Context._msgData() (#37-40) is never used and should be removed
Remove unused functions.

Additional information: link

TomAndJerryInu._tTotal (#147) is set pre-construction with a non-constant function or state variable:
- initialsupply * 10 ** _decimals
TomAndJerryInu._rTotal (#148) is set pre-construction with a non-constant function or state variable:
- (MAX - (MAX % _tTotal))
Remove any initialization of state variables via non-constant state variables or function calls. If variables must be set upon contract deployment, locate initialization in the constructor instead.

Additional information: link

Pragma version^0.8.11 (#8) necessitates a version too recent to be trusted. Consider deploying with 0.6.12/0.7.6/0.8.7
solc-0.8.13 is not recommended for deployment
Deploy with any of the following Solidity versions: 0.5.16 - 0.5.17, 0.6.11 - 0.6.12, 0.7.5 - 0.7.6 Use a simple pragma version that allows any of these versions. Consider using the latest version of Solidity for testing.

Additional information: link

Low level call in Address.sendValue(address,uint256) (#102-107):
- (success) = recipient.call{value: amount}() (#105)
Avoid low-level calls. Check the call success. If the call is meant for a contract, check for code existence

Additional information: link

Function IRouter.WETH() (#83) is not in mixedCase
Struct TomAndJerryInu.valuesFromGetValues (#182-194) is not in CapWords
Parameter TomAndJerryInu.setTaxes(uint256,uint256,uint256,uint256)._buyback (#350) is not in mixedCase
Parameter TomAndJerryInu.setTaxes(uint256,uint256,uint256,uint256)._marketing (#350) is not in mixedCase
Parameter TomAndJerryInu.setTaxes(uint256,uint256,uint256,uint256)._liquidity (#350) is not in mixedCase
Parameter TomAndJerryInu.setTaxes(uint256,uint256,uint256,uint256)._development (#350) is not in mixedCase
Parameter TomAndJerryInu.setSellTaxes(uint256,uint256,uint256,uint256)._buyback (#355) is not in mixedCase
Parameter TomAndJerryInu.setSellTaxes(uint256,uint256,uint256,uint256)._marketing (#355) is not in mixedCase
Parameter TomAndJerryInu.setSellTaxes(uint256,uint256,uint256,uint256)._liquidity (#355) is not in mixedCase
Parameter TomAndJerryInu.setSellTaxes(uint256,uint256,uint256,uint256)._development (#355) is not in mixedCase
Parameter TomAndJerryInu.updateSwapEnabled(bool)._enabled (#639) is not in mixedCase
Parameter TomAndJerryInu.rescueAnyBEP20Tokens(address,address,uint256)._tokenAddr (#679) is not in mixedCase
Parameter TomAndJerryInu.rescueAnyBEP20Tokens(address,address,uint256)._to (#679) is not in mixedCase
Parameter TomAndJerryInu.rescueAnyBEP20Tokens(address,address,uint256)._amount (#679) is not in mixedCase
Constant TomAndJerryInu._decimals (#143) is not in UPPER_CASE_WITH_UNDERSCORES
Variable TomAndJerryInu.genesis_block (#155) is not in mixedCase
Constant TomAndJerryInu._name (#160) is not in UPPER_CASE_WITH_UNDERSCORES
Constant TomAndJerryInu._symbol (#161) is not in UPPER_CASE_WITH_UNDERSCORES
Follow the Solidity naming convention.

Additional information: link

Redundant expression "this (#38)" inContext (#32-41)
Remove redundant statements if they congest code but offer no value.

Additional information: link

Variable TomAndJerryInu.setSellTaxes(uint256,uint256,uint256,uint256)._development (#355) is too similar to TomAndJerryInu._getRValues1(TomAndJerryInu.valuesFromGetValues,uint256,bool,uint256).rdevelopment (#432)
Variable TomAndJerryInu.setSellTaxes(uint256,uint256,uint256,uint256)._development (#355) is too similar to TomAndJerryInu._takedevelopment(uint256,uint256).rdevelopment (#385)
Variable TomAndJerryInu.setSellTaxes(uint256,uint256,uint256,uint256)._development (#355) is too similar to TomAndJerryInu._getRValues2(TomAndJerryInu.valuesFromGetValues,bool,uint256).rdevelopment (#437)
Variable TomAndJerryInu.setTaxes(uint256,uint256,uint256,uint256)._development (#350) is too similar to TomAndJerryInu._takedevelopment(uint256,uint256).rdevelopment (#385)
Variable TomAndJerryInu.setTaxes(uint256,uint256,uint256,uint256)._development (#350) is too similar to TomAndJerryInu._getRValues2(TomAndJerryInu.valuesFromGetValues,bool,uint256).rdevelopment (#437)
Variable TomAndJerryInu.setTaxes(uint256,uint256,uint256,uint256)._development (#350) is too similar to TomAndJerryInu._getRValues1(TomAndJerryInu.valuesFromGetValues,uint256,bool,uint256).rdevelopment (#432)
Variable TomAndJerryInu.setSellTaxes(uint256,uint256,uint256,uint256)._development (#355) is too similar to TomAndJerryInu._takedevelopment(uint256,uint256).tdevelopment (#385)
Variable TomAndJerryInu.setTaxes(uint256,uint256,uint256,uint256)._development (#350) is too similar to TomAndJerryInu._takedevelopment(uint256,uint256).tdevelopment (#385)
Variable TomAndJerryInu._getRValues2(TomAndJerryInu.valuesFromGetValues,bool,uint256).rdevelopment (#437) is too similar to TomAndJerryInu._takedevelopment(uint256,uint256).tdevelopment (#385)
Variable TomAndJerryInu._takedevelopment(uint256,uint256).rdevelopment (#385) is too similar to TomAndJerryInu._takedevelopment(uint256,uint256).tdevelopment (#385)
Variable TomAndJerryInu._getRValues1(TomAndJerryInu.valuesFromGetValues,uint256,bool,uint256).rdevelopment (#432) is too similar to TomAndJerryInu._takedevelopment(uint256,uint256).tdevelopment (#385)
Prevent variables from having similar names.

Additional information: link

TomAndJerryInu.slitherConstructorVariables() (#111-686) uses literals with too many digits:
- initialsupply = 1000000 (#146)
Use: Ether suffix, Time suffix, or The scientific notation

Additional information: link

TomAndJerryInu.initialsupply (#146) should be constant
Add the constant attributes to state variables that never change.

Additional information: link

renounceOwnership() should be declared external:
- Ownable.renounceOwnership() (#61-63)
transferOwnership(address) should be declared external:
- Ownable.transferOwnership(address) (#65-68)
name() should be declared external:
- TomAndJerryInu.name() (#231-233)
symbol() should be declared external:
- TomAndJerryInu.symbol() (#234-236)
totalSupply() should be declared external:
- TomAndJerryInu.totalSupply() (#242-244)
allowance(address,address) should be declared external:
- TomAndJerryInu.allowance(address,address) (#251-253)
approve(address,uint256) should be declared external:
- TomAndJerryInu.approve(address,uint256) (#255-258)
transferFrom(address,address,uint256) should be declared external:
- TomAndJerryInu.transferFrom(address,address,uint256) (#260-268)
increaseAllowance(address,uint256) should be declared external:
- TomAndJerryInu.increaseAllowance(address,uint256) (#270-273)
decreaseAllowance(address,uint256) should be declared external:
- TomAndJerryInu.decreaseAllowance(address,uint256) (#275-281)
transfer(address,uint256) should be declared external:
- TomAndJerryInu.transfer(address,uint256) (#283-287)
isExcludedFromReward(address) should be declared external:
- TomAndJerryInu.isExcludedFromReward(address) (#289-291)
reflectionFromToken(uint256,bool) should be declared external:
- TomAndJerryInu.reflectionFromToken(uint256,bool) (#293-302)
excludeFromFee(address) should be declared external:
- TomAndJerryInu.excludeFromFee(address) (#338-340)
includeInFee(address) should be declared external:
- TomAndJerryInu.includeInFee(address) (#342-344)
isExcludedFromFee(address) should be declared external:
- TomAndJerryInu.isExcludedFromFee(address) (#346-348)
setTaxes(uint256,uint256,uint256,uint256) should be declared external:
- TomAndJerryInu.setTaxes(uint256,uint256,uint256,uint256) (#350-353)
setSellTaxes(uint256,uint256,uint256,uint256) should be declared external:
- TomAndJerryInu.setSellTaxes(uint256,uint256,uint256,uint256) (#355-358)
rescueAnyBEP20Tokens(address,address,uint256) should be declared external:
- TomAndJerryInu.rescueAnyBEP20Tokens(address,address,uint256) (#679-681)
Use the external attribute for functions never called from the contract.

Additional information: link

Attempt to swap token was unsuccessful. For some reason it is untradeable. If token is not in presale stage and is not traded outside PancakeSwap, then it's a scam

Additional information: link

Average 30d PancakeSwap liquidity is less than $100. Token is either dead or inactive.

Average 30d PancakeSwap volume is less than $100. Token is either dead or inactive.

Average 30d number of PancakeSwap swaps is less than 1. Token is either dead or inactive.

Number of Binance Smart Chain (BSC) token holders is less than 100. Token is either dead or inactive. Ignore for presale.

Token is deployed only at one blockchain

Token has only one trading pair

Unable to find website, listings and other project-related information

Token is marked as scam (rug pull, honeypot, phishing, etc.)

Additional information: link

Young tokens have high risks of scam / price dump / death

Token has no active CoinGecko listing / rank

Token has no active CoinMarketCap listing / rank