SPS [SplinterShare] Token

Unable to find manual contract audit (e.g. Certik, PeckShield, Solidity...)

SplinterShare.addLiquidity(uint256,uint256) (#1951-1965) sends eth to arbitrary user
Dangerous calls:
- uniswapV2Router.addLiquidityETH{value: bnbAmount}(address(this),tokenAmount,0,0,marketingWallet,block.timestamp) (#1957-1964)
SplinterShare.buyBackAndBurn(uint256) (#1967-1988) sends eth to arbitrary user
Dangerous calls:
- uniswapV2Router.swapExactETHForTokensSupportingFeeOnTransferTokens{value: amount}(0,path,marketingWallet,block.timestamp.add(300)) (#1976-1981)
Ensure that an arbitrary user cannot withdraw unauthorized funds.

Additional information: link

Reentrancy in SplinterShare._transfer(address,address,uint256) (#1817-1933):
External calls:
- swapTokensForBNB(swapTokens) (#1858)
- uniswapV2Router.swapExactTokensForETHSupportingFeeOnTransferTokens(tokenAmount,0,path,address(this),block.timestamp) (#1999-2005)
- buyBackAndBurn(buyBackBalance.div(10 ** 2).mul(rand())) (#1870)
- uniswapV2Router.swapExactETHForTokensSupportingFeeOnTransferTokens{value: amount}(0,path,marketingWallet,block.timestamp.add(300)) (#1976-1981)
External calls sending eth:
- transferToWallet(address(marketingWallet),marketingPortion) (#1861)
- recipient.transfer(amount) (#2041)
- transferToWallet(address(teamWallet),teamPortion) (#1862)
- recipient.transfer(amount) (#2041)
- buyBackAndBurn(buyBackBalance.div(10 ** 2).mul(rand())) (#1870)
- uniswapV2Router.swapExactETHForTokensSupportingFeeOnTransferTokens{value: amount}(0,path,marketingWallet,block.timestamp.add(300)) (#1976-1981)
State variables written after the call(s):
- buyBackAndBurn(buyBackBalance.div(10 ** 2).mul(rand())) (#1870)
- _balances[account] = _balances[account].sub(amount,ERC20: burn amount exceeds balance) (#421)
Reentrancy in SplinterShare._transfer(address,address,uint256) (#1817-1933):
External calls:
- swapTokensForBNB(swapTokens) (#1858)
- uniswapV2Router.swapExactTokensForETHSupportingFeeOnTransferTokens(tokenAmount,0,path,address(this),block.timestamp) (#1999-2005)
- buyBackAndBurn(buyBackBalance.div(10 ** 2).mul(rand())) (#1870)
- uniswapV2Router.swapExactETHForTokensSupportingFeeOnTransferTokens{value: amount}(0,path,marketingWallet,block.timestamp.add(300)) (#1976-1981)
- swapTokensForBNB(swapTokens_scope_0) (#1873)
- uniswapV2Router.swapExactTokensForETHSupportingFeeOnTransferTokens(tokenAmount,0,path,address(this),block.timestamp) (#1999-2005)
- swapAndLiquify(contractTokenBalance.div(totalFees).mul(buyBackAndLiquidityFee)) (#1876)
- uniswapV2Router.addLiquidityETH{value: bnbAmount}(address(this),tokenAmount,0,0,marketingWallet,block.timestamp) (#1957-1964)
- uniswapV2Router.swapExactTokensForETHSupportingFeeOnTransferTokens(tokenAmount,0,path,address(this),block.timestamp) (#1999-2005)
- swapAndSendSpsDividends(sellTokens.div(10 ** 2).mul(rand())) (#1882)
- success = IERC20(dividendToken).transfer(dividendTracker,amount) (#2045)
- dividendPayingTracker.distributeDividends(amount) (#2048)
- uniswapV2Router.swapExactTokensForTokensSupportingFeeOnTransferTokens(_tokenAmount,0,path,_recipient,block.timestamp) (#2019-2025)
- swapAndSendDECDividends(sellTokens_scope_1.div(10 ** 2).mul(rand())) (#1887)
- success = IERC20(dividendToken).transfer(dividendTracker,amount) (#2045)
- dividendPayingTracker.distributeDividends(amount) (#2048)
- uniswapV2Router.swapExactTokensForTokensSupportingFeeOnTransferTokens(_tokenAmount,0,path,_recipient,block.timestamp) (#2019-2025)
External calls sending eth:
- transferToWallet(address(marketingWallet),marketingPortion) (#1861)
- recipient.transfer(amount) (#2041)
- transferToWallet(address(teamWallet),teamPortion) (#1862)
- recipient.transfer(amount) (#2041)
- buyBackAndBurn(buyBackBalance.div(10 ** 2).mul(rand())) (#1870)
- uniswapV2Router.swapExactETHForTokensSupportingFeeOnTransferTokens{value: amount}(0,path,marketingWallet,block.timestamp.add(300)) (#1976-1981)
- swapAndLiquify(contractTokenBalance.div(totalFees).mul(buyBackAndLiquidityFee)) (#1876)
- uniswapV2Router.addLiquidityETH{value: bnbAmount}(address(this),tokenAmount,0,0,marketingWallet,block.timestamp) (#1957-1964)
State variables written after the call(s):
- super._transfer(from,address(this),fees) (#1906)
- _balances[sender] = _balances[sender].sub(amount,ERC20: transfer amount exceeds balance) (#381)
- _balances[recipient] = _balances[recipient].add(amount) (#382)
- super._transfer(from,to,amount) (#1909)
- _balances[sender] = _balances[sender].sub(amount,ERC20: transfer amount exceeds balance) (#381)
- _balances[recipient] = _balances[recipient].add(amount) (#382)
- swapping = false (#1890)
Reentrancy in SplinterShare.buyBackAndBurn(uint256) (#1967-1988):
External calls:
- uniswapV2Router.swapExactETHForTokensSupportingFeeOnTransferTokens{value: amount}(0,path,marketingWallet,block.timestamp.add(300)) (#1976-1981)
State variables written after the call(s):
- _burn(marketingWallet,swappedBalance) (#1985)
- _balances[account] = _balances[account].sub(amount,ERC20: burn amount exceeds balance) (#421)
Apply the check-effects-interactions pattern.

Additional information: link

Contract locking ether found:
Contract SpsDividendTracker (#2054-2269) has payable functions:
- DividendPayingToken.receive() (#583-584)
- DividendPayingToken.distributeDividends() (#599-610)
- IDividendPayingToken.distributeDividends() (#494)
But does not have a function to withdraw the ether
Contract locking ether found:
Contract DECDividendTracker (#2271-2487) has payable functions:
- DividendPayingToken.receive() (#583-584)
- DividendPayingToken.distributeDividends() (#599-610)
- IDividendPayingToken.distributeDividends() (#494)
But does not have a function to withdraw the ether
Remove the payable attribute or add a withdraw function.

Additional information: link

SplinterShare.rand() (#1779-1795) uses a dangerous strict equality:
- randNumber == 0 (#1789)
Don't use strict equality to determine if an account has enough Ether or tokens.

Additional information: link

Combination 1: Reentrancy vulnerabilities + Functions that send Ether to arbitraty destination. Usual for scams. May be justified by some complex mechanics (e.g. rebase, reflections). DYOR & manual audit are advised.

SplinterShare.rand() (#1779-1795) performs a multiplication on the result of a division:
-randNumber = (seed - ((seed / 100) * 100)) (#1788)
SplinterShare._transfer(address,address,uint256) (#1817-1933) performs a multiplication on the result of a division:
-fees = amount.div(100).mul(totalFees) (#1897)
SplinterShare._transfer(address,address,uint256) (#1817-1933) performs a multiplication on the result of a division:
-fees = fees.div(100).mul(sellFeeIncreaseFactor) (#1901)
SplinterShare._transfer(address,address,uint256) (#1817-1933) performs a multiplication on the result of a division:
-swapTokens = contractTokenBalance.div(totalFees).mul(marketingFee) (#1857)
SplinterShare._transfer(address,address,uint256) (#1817-1933) performs a multiplication on the result of a division:
-teamPortion = address(this).balance.div(10 ** 2).mul(66) (#1859)
SplinterShare._transfer(address,address,uint256) (#1817-1933) performs a multiplication on the result of a division:
-swapTokens_scope_0 = contractTokenBalance.div(totalFees).mul(buyBackAndLiquidityFee) (#1872)
SplinterShare._transfer(address,address,uint256) (#1817-1933) performs a multiplication on the result of a division:
-swapAndLiquify(contractTokenBalance.div(totalFees).mul(buyBackAndLiquidityFee)) (#1876)
SplinterShare._transfer(address,address,uint256) (#1817-1933) performs a multiplication on the result of a division:
-buyBackAndBurn(buyBackBalance.div(10 ** 2).mul(rand())) (#1870)
SplinterShare._transfer(address,address,uint256) (#1817-1933) performs a multiplication on the result of a division:
-sellTokens = swapTokensAtAmount.div(spsDividendRewardsFee.add(decDividendRewardsFee)).mul(spsDividendRewardsFee) (#1881)
SplinterShare._transfer(address,address,uint256) (#1817-1933) performs a multiplication on the result of a division:
-swapAndSendSpsDividends(sellTokens.div(10 ** 2).mul(rand())) (#1882)
SplinterShare._transfer(address,address,uint256) (#1817-1933) performs a multiplication on the result of a division:
-sellTokens_scope_1 = swapTokensAtAmount.div(spsDividendRewardsFee.add(decDividendRewardsFee)).mul(decDividendRewardsFee) (#1886)
SplinterShare._transfer(address,address,uint256) (#1817-1933) performs a multiplication on the result of a division:
-swapAndSendDECDividends(sellTokens_scope_1.div(10 ** 2).mul(rand())) (#1887)
Consider ordering multiplication before division.

Additional information: link

Reentrancy in DividendPayingToken._withdrawDividendOfUser(address) (#639-655):
External calls:
- success = IERC20(dividendToken).transfer(user,_withdrawableDividend) (#644)
State variables written after the call(s):
- withdrawnDividends[user] = withdrawnDividends[user].sub(_withdrawableDividend) (#647)
Reentrancy in SplinterShare.updateDECDividendTracker(address) (#1582-1597):
External calls:
- newDECDividendTracker.excludeFromDividends(address(newDECDividendTracker)) (#1589)
- newDECDividendTracker.excludeFromDividends(address(this)) (#1590)
- newDECDividendTracker.excludeFromDividends(address(uniswapV2Router)) (#1591)
- newDECDividendTracker.excludeFromDividends(address(deadAddress)) (#1592)
State variables written after the call(s):
- decDividendTracker = newDECDividendTracker (#1596)
Reentrancy in SplinterShare.updateSpsDividendTracker(address) (#1565-1580):
External calls:
- newSpsDividendTracker.excludeFromDividends(address(newSpsDividendTracker)) (#1572)
- newSpsDividendTracker.excludeFromDividends(address(this)) (#1573)
- newSpsDividendTracker.excludeFromDividends(address(uniswapV2Router)) (#1574)
- newSpsDividendTracker.excludeFromDividends(address(deadAddress)) (#1575)
State variables written after the call(s):
- spsDividendTracker = newSpsDividendTracker (#1579)
Reentrancy in SplinterShare.whitelistDxSale(address,address) (#1424-1433):
External calls:
- spsDividendTracker.excludeFromDividends(_presaleAddress) (#1426)
- decDividendTracker.excludeFromDividends(_presaleAddress) (#1427)
- spsDividendTracker.excludeFromDividends(_routerAddress) (#1430)
- decDividendTracker.excludeFromDividends(_routerAddress) (#1431)
State variables written after the call(s):
- excludeFromFees(_routerAddress,true) (#1432)
- isExcludedFromFees[account] = excluded (#1631)
Apply the check-effects-interactions pattern.

Additional information: link

DividendPayingToken.setDividendTokenAddress(address) (#632-635) uses tx.origin for authorization: require(bool,string)(tx.origin == 0x909eC21E5d07adA807651AA1A6ec2865f92ba1AB,Only owner can change dividend contract address) (#633)
Do not use tx.origin for authorization.

Additional information: link

SplinterShare._transfer(address,address,uint256).lastProcessedIndex (#1919) is a local variable never initialized
SplinterShare._transfer(address,address,uint256).lastProcessedIndex_scope_4 (#1926) is a local variable never initialized
SplinterShare._transfer(address,address,uint256).iterations (#1919) is a local variable never initialized
SplinterShare._transfer(address,address,uint256).claims (#1919) is a local variable never initialized
SplinterShare._transfer(address,address,uint256).iterations_scope_2 (#1926) is a local variable never initialized
SplinterShare._transfer(address,address,uint256).claims_scope_3 (#1926) is a local variable never initialized
Initialize all the variables. If a variable is meant to be initialized to zero, explicitly set it to zero to improve code readability.

Additional information: link

SplinterShare.claim() (#1797-1800) ignores return value by spsDividendTracker.processAccount(address(msg.sender),false) (#1798)
SplinterShare.claim() (#1797-1800) ignores return value by decDividendTracker.processAccount(address(msg.sender),false) (#1799)
SplinterShare._transfer(address,address,uint256) (#1817-1933) ignores return value by spsDividendTracker.process(gas) (#1919-1924)
SplinterShare._transfer(address,address,uint256) (#1817-1933) ignores return value by decDividendTracker.process(gas) (#1926-1931)
SplinterShare.addLiquidity(uint256,uint256) (#1951-1965) ignores return value by uniswapV2Router.addLiquidityETH{value: bnbAmount}(address(this),tokenAmount,0,0,marketingWallet,block.timestamp) (#1957-1964)
Ensure that all the return values of the function calls are used.

Additional information: link

DividendPayingToken.constructor(string,string,address)._name (#579) shadows:
- ERC20._name (#209) (state variable)
DividendPayingToken.constructor(string,string,address)._symbol (#579) shadows:
- ERC20._symbol (#210) (state variable)
Rename the local variables that shadow another component.

Additional information: link

SplinterShare.setMaxBuyTransaction(uint256) (#1441-1443) should emit an event for:
- maxBuyTranscationAmount = _maxTxn * (10 ** 18) (#1442)
SplinterShare.setMaxSellTransaction(uint256) (#1445-1447) should emit an event for:
- maxSellTransactionAmount = _maxTxn * (10 ** 18) (#1446)
SplinterShare.setMaxWalletTokend(uint256) (#1473-1475) should emit an event for:
- maxWalletToken = _maxToken * (10 ** 18) (#1474)
SplinterShare.setSwapTokensAtAmount(uint256) (#1477-1479) should emit an event for:
- swapTokensAtAmount = _swapAmount * (10 ** 18) (#1478)
SplinterShare.setSellTransactionMultiplier(uint256) (#1481-1483) should emit an event for:
- sellFeeIncreaseFactor = _multiplier (#1482)
SplinterShare.updateSpsDividendRewardFee(uint8) (#1599-1603) should emit an event for:
- spsDividendRewardsFee = newFee (#1601)
- totalFees = spsDividendRewardsFee.add(marketingFee).add(decDividendRewardsFee).add(buyBackAndLiquidityFee) (#1602)
SplinterShare.updateDECDividendRewardFee(uint8) (#1605-1609) should emit an event for:
- decDividendRewardsFee = newFee (#1607)
- totalFees = decDividendRewardsFee.add(spsDividendRewardsFee).add(marketingFee).add(buyBackAndLiquidityFee) (#1608)
SplinterShare.updateMarketingFee(uint8) (#1611-1615) should emit an event for:
- marketingFee = newFee (#1613)
- totalFees = marketingFee.add(spsDividendRewardsFee).add(decDividendRewardsFee).add(buyBackAndLiquidityFee) (#1614)
SplinterShare.updateBuyBackAndLiquidityFee(uint8) (#1617-1621) should emit an event for:
- buyBackAndLiquidityFee = newFee (#1619)
- totalFees = buyBackAndLiquidityFee.add(spsDividendRewardsFee).add(decDividendRewardsFee).add(marketingFee) (#1620)
Emit an event for critical parameter changes.

Additional information: link

SplinterShare.whitelistDxSale(address,address)._presaleAddress (#1424) lacks a zero-check on :
- presaleAddress = _presaleAddress (#1425)
SplinterShare.updateDECDividendToken(address)._newContract (#1449) lacks a zero-check on :
- decDividendToken = _newContract (#1450)
SplinterShare.updateSpsDividendToken(address)._newContract (#1454) lacks a zero-check on :
- spsDividendToken = _newContract (#1455)
DividendPayingToken.constructor(string,string,address)._token (#579) lacks a zero-check on :
- dividendToken = _token (#580)
SpsDividendTracker.setDividendTokenAddress(address).newToken (#2087) lacks a zero-check on :
- dividendToken = newToken (#2088)
DECDividendTracker.setDividendTokenAddress(address).newToken (#2304) lacks a zero-check on :
- dividendToken = newToken (#2305)
Check that the address is not zero.

Additional information: link

DividendPayingToken._withdrawDividendOfUser(address) (#639-655) has external calls inside a loop: success = IERC20(dividendToken).transfer(user,_withdrawableDividend) (#644)
Favor pull over push strategy for external calls.

Additional information: link

Variable 'SplinterShare._transfer(address,address,uint256).claims (#1919)' in SplinterShare._transfer(address,address,uint256) (#1817-1933) potentially used before declaration: ProcessedSpsDividendTracker(iterations,claims,lastProcessedIndex,true,gas,tx.origin) (#1920)
Variable 'SplinterShare._transfer(address,address,uint256).iterations (#1919)' in SplinterShare._transfer(address,address,uint256) (#1817-1933) potentially used before declaration: ProcessedSpsDividendTracker(iterations,claims,lastProcessedIndex,true,gas,tx.origin) (#1920)
Variable 'SplinterShare._transfer(address,address,uint256).lastProcessedIndex (#1919)' in SplinterShare._transfer(address,address,uint256) (#1817-1933) potentially used before declaration: ProcessedSpsDividendTracker(iterations,claims,lastProcessedIndex,true,gas,tx.origin) (#1920)
Variable 'SplinterShare._transfer(address,address,uint256).lastProcessedIndex_scope_4 (#1926)' in SplinterShare._transfer(address,address,uint256) (#1817-1933) potentially used before declaration: ProcessedDECDividendTracker(iterations_scope_2,claims_scope_3,lastProcessedIndex_scope_4,true,gas,tx.origin) (#1927)
Variable 'SplinterShare._transfer(address,address,uint256).claims_scope_3 (#1926)' in SplinterShare._transfer(address,address,uint256) (#1817-1933) potentially used before declaration: ProcessedDECDividendTracker(iterations_scope_2,claims_scope_3,lastProcessedIndex_scope_4,true,gas,tx.origin) (#1927)
Variable 'SplinterShare._transfer(address,address,uint256).iterations_scope_2 (#1926)' in SplinterShare._transfer(address,address,uint256) (#1817-1933) potentially used before declaration: ProcessedDECDividendTracker(iterations_scope_2,claims_scope_3,lastProcessedIndex_scope_4,true,gas,tx.origin) (#1927)
Move all variable declarations prior to any usage of the variable, and ensure that reaching a variable declaration does not depend on some conditional if it is used unconditionally.

Additional information: link

Reentrancy in SplinterShare._transfer(address,address,uint256) (#1817-1933):
External calls:
- swapTokensForBNB(swapTokens) (#1858)
- uniswapV2Router.swapExactTokensForETHSupportingFeeOnTransferTokens(tokenAmount,0,path,address(this),block.timestamp) (#1999-2005)
- swapTokensForBNB(swapTokens_scope_0) (#1873)
- uniswapV2Router.swapExactTokensForETHSupportingFeeOnTransferTokens(tokenAmount,0,path,address(this),block.timestamp) (#1999-2005)
External calls sending eth:
- transferToWallet(address(marketingWallet),marketingPortion) (#1861)
- recipient.transfer(amount) (#2041)
- transferToWallet(address(teamWallet),teamPortion) (#1862)
- recipient.transfer(amount) (#2041)
State variables written after the call(s):
- swapTokensForBNB(swapTokens_scope_0) (#1873)
- _allowances[owner][spender] = amount (#443)
Reentrancy in SplinterShare._transfer(address,address,uint256) (#1817-1933):
External calls:
- swapTokensForBNB(swapTokens) (#1858)
- uniswapV2Router.swapExactTokensForETHSupportingFeeOnTransferTokens(tokenAmount,0,path,address(this),block.timestamp) (#1999-2005)
- swapAndLiquify(contractTokenBalance.div(totalFees).mul(buyBackAndLiquidityFee)) (#1876)
- uniswapV2Router.addLiquidityETH{value: bnbAmount}(address(this),tokenAmount,0,0,marketingWallet,block.timestamp) (#1957-1964)
- uniswapV2Router.swapExactTokensForETHSupportingFeeOnTransferTokens(tokenAmount,0,path,address(this),block.timestamp) (#1999-2005)
External calls sending eth:
- transferToWallet(address(marketingWallet),marketingPortion) (#1861)
- recipient.transfer(amount) (#2041)
- transferToWallet(address(teamWallet),teamPortion) (#1862)
- recipient.transfer(amount) (#2041)
- swapAndLiquify(contractTokenBalance.div(totalFees).mul(buyBackAndLiquidityFee)) (#1876)
- uniswapV2Router.addLiquidityETH{value: bnbAmount}(address(this),tokenAmount,0,0,marketingWallet,block.timestamp) (#1957-1964)
State variables written after the call(s):
- swapAndLiquify(contractTokenBalance.div(totalFees).mul(buyBackAndLiquidityFee)) (#1876)
- _allowances[owner][spender] = amount (#443)
Reentrancy in SplinterShare._transfer(address,address,uint256) (#1817-1933):
External calls:
- swapTokensForBNB(swapTokens) (#1858)
- uniswapV2Router.swapExactTokensForETHSupportingFeeOnTransferTokens(tokenAmount,0,path,address(this),block.timestamp) (#1999-2005)
- buyBackAndBurn(buyBackBalance.div(10 ** 2).mul(rand())) (#1870)
- uniswapV2Router.swapExactETHForTokensSupportingFeeOnTransferTokens{value: amount}(0,path,marketingWallet,block.timestamp.add(300)) (#1976-1981)
- swapTokensForBNB(swapTokens_scope_0) (#1873)
- uniswapV2Router.swapExactTokensForETHSupportingFeeOnTransferTokens(tokenAmount,0,path,address(this),block.timestamp) (#1999-2005)
- swapAndLiquify(contractTokenBalance.div(totalFees).mul(buyBackAndLiquidityFee)) (#1876)
- uniswapV2Router.addLiquidityETH{value: bnbAmount}(address(this),tokenAmount,0,0,marketingWallet,block.timestamp) (#1957-1964)
- uniswapV2Router.swapExactTokensForETHSupportingFeeOnTransferTokens(tokenAmount,0,path,address(this),block.timestamp) (#1999-2005)
- swapAndSendSpsDividends(sellTokens.div(10 ** 2).mul(rand())) (#1882)
- success = IERC20(dividendToken).transfer(dividendTracker,amount) (#2045)
- dividendPayingTracker.distributeDividends(amount) (#2048)
- uniswapV2Router.swapExactTokensForTokensSupportingFeeOnTransferTokens(_tokenAmount,0,path,_recipient,block.timestamp) (#2019-2025)
External calls sending eth:
- transferToWallet(address(marketingWallet),marketingPortion) (#1861)
- recipient.transfer(amount) (#2041)
- transferToWallet(address(teamWallet),teamPortion) (#1862)
- recipient.transfer(amount) (#2041)
- buyBackAndBurn(buyBackBalance.div(10 ** 2).mul(rand())) (#1870)
- uniswapV2Router.swapExactETHForTokensSupportingFeeOnTransferTokens{value: amount}(0,path,marketingWallet,block.timestamp.add(300)) (#1976-1981)
- swapAndLiquify(contractTokenBalance.div(totalFees).mul(buyBackAndLiquidityFee)) (#1876)
- uniswapV2Router.addLiquidityETH{value: bnbAmount}(address(this),tokenAmount,0,0,marketingWallet,block.timestamp) (#1957-1964)
State variables written after the call(s):
- swapAndSendSpsDividends(sellTokens.div(10 ** 2).mul(rand())) (#1882)
- _allowances[owner][spender] = amount (#443)
Reentrancy in SplinterShare._transfer(address,address,uint256) (#1817-1933):
External calls:
- swapTokensForBNB(swapTokens) (#1858)
- uniswapV2Router.swapExactTokensForETHSupportingFeeOnTransferTokens(tokenAmount,0,path,address(this),block.timestamp) (#1999-2005)
- buyBackAndBurn(buyBackBalance.div(10 ** 2).mul(rand())) (#1870)
- uniswapV2Router.swapExactETHForTokensSupportingFeeOnTransferTokens{value: amount}(0,path,marketingWallet,block.timestamp.add(300)) (#1976-1981)
- swapTokensForBNB(swapTokens_scope_0) (#1873)
- uniswapV2Router.swapExactTokensForETHSupportingFeeOnTransferTokens(tokenAmount,0,path,address(this),block.timestamp) (#1999-2005)
- swapAndLiquify(contractTokenBalance.div(totalFees).mul(buyBackAndLiquidityFee)) (#1876)
- uniswapV2Router.addLiquidityETH{value: bnbAmount}(address(this),tokenAmount,0,0,marketingWallet,block.timestamp) (#1957-1964)
- uniswapV2Router.swapExactTokensForETHSupportingFeeOnTransferTokens(tokenAmount,0,path,address(this),block.timestamp) (#1999-2005)
- swapAndSendSpsDividends(sellTokens.div(10 ** 2).mul(rand())) (#1882)
- success = IERC20(dividendToken).transfer(dividendTracker,amount) (#2045)
- dividendPayingTracker.distributeDividends(amount) (#2048)
- uniswapV2Router.swapExactTokensForTokensSupportingFeeOnTransferTokens(_tokenAmount,0,path,_recipient,block.timestamp) (#2019-2025)
- swapAndSendDECDividends(sellTokens_scope_1.div(10 ** 2).mul(rand())) (#1887)
- success = IERC20(dividendToken).transfer(dividendTracker,amount) (#2045)
- dividendPayingTracker.distributeDividends(amount) (#2048)
- uniswapV2Router.swapExactTokensForTokensSupportingFeeOnTransferTokens(_tokenAmount,0,path,_recipient,block.timestamp) (#2019-2025)
External calls sending eth:
- transferToWallet(address(marketingWallet),marketingPortion) (#1861)
- recipient.transfer(amount) (#2041)
- transferToWallet(address(teamWallet),teamPortion) (#1862)
- recipient.transfer(amount) (#2041)
- buyBackAndBurn(buyBackBalance.div(10 ** 2).mul(rand())) (#1870)
- uniswapV2Router.swapExactETHForTokensSupportingFeeOnTransferTokens{value: amount}(0,path,marketingWallet,block.timestamp.add(300)) (#1976-1981)
- swapAndLiquify(contractTokenBalance.div(totalFees).mul(buyBackAndLiquidityFee)) (#1876)
- uniswapV2Router.addLiquidityETH{value: bnbAmount}(address(this),tokenAmount,0,0,marketingWallet,block.timestamp) (#1957-1964)
State variables written after the call(s):
- swapAndSendDECDividends(sellTokens_scope_1.div(10 ** 2).mul(rand())) (#1887)
- _allowances[owner][spender] = amount (#443)
Reentrancy in SplinterShare.buyBackAndBurn(uint256) (#1967-1988):
External calls:
- uniswapV2Router.swapExactETHForTokensSupportingFeeOnTransferTokens{value: amount}(0,path,marketingWallet,block.timestamp.add(300)) (#1976-1981)
State variables written after the call(s):
- _burn(marketingWallet,swappedBalance) (#1985)
- _totalSupply = _totalSupply.sub(amount) (#422)
Reentrancy in SplinterShare.constructor() (#1382-1418):
External calls:
- _uniswapV2Pair = IUniswapV2Factory(_uniswapV2Router.factory()).createPair(address(this),_uniswapV2Router.WETH()) (#1393-1394)
State variables written after the call(s):
- uniswapV2Pair = _uniswapV2Pair (#1397)
- uniswapV2Router = _uniswapV2Router (#1396)
Reentrancy in SplinterShare.constructor() (#1382-1418):
External calls:
- _uniswapV2Pair = IUniswapV2Factory(_uniswapV2Router.factory()).createPair(address(this),_uniswapV2Router.WETH()) (#1393-1394)
- _setAutomatedMarketMakerPair(_uniswapV2Pair,true) (#1399)
- spsDividendTracker.excludeFromDividends(pair) (#1660)
- decDividendTracker.excludeFromDividends(pair) (#1661)
- excludeFromDividend(address(spsDividendTracker)) (#1401)
- spsDividendTracker.excludeFromDividends(address(account)) (#1637)
- decDividendTracker.excludeFromDividends(address(account)) (#1638)
- excludeFromDividend(address(decDividendTracker)) (#1402)
- spsDividendTracker.excludeFromDividends(address(account)) (#1637)
- decDividendTracker.excludeFromDividends(address(account)) (#1638)
- excludeFromDividend(address(this)) (#1403)
- spsDividendTracker.excludeFromDividends(address(account)) (#1637)
- decDividendTracker.excludeFromDividends(address(account)) (#1638)
- excludeFromDividend(address(_uniswapV2Router)) (#1404)
- spsDividendTracker.excludeFromDividends(address(account)) (#1637)
- decDividendTracker.excludeFromDividends(address(account)) (#1638)
- excludeFromDividend(deadAddress) (#1405)
- spsDividendTracker.excludeFromDividends(address(account)) (#1637)
- decDividendTracker.excludeFromDividends(address(account)) (#1638)
State variables written after the call(s):
- _mint(owner(),100000000000 * (10 ** 18)) (#1417)
- _balances[account] = _balances[account].add(amount) (#401)
- _mint(owner(),100000000000 * (10 ** 18)) (#1417)
- _totalSupply = _totalSupply.add(amount) (#400)
- excludeFromFees(marketingWallet,true) (#1408)
- isExcludedFromFees[account] = excluded (#1631)
- excludeFromFees(teamWallet,true) (#1409)
- isExcludedFromFees[account] = excluded (#1631)
- excludeFromFees(address(this),true) (#1410)
- isExcludedFromFees[account] = excluded (#1631)
- excludeFromFees(owner(),true) (#1411)
- isExcludedFromFees[account] = excluded (#1631)
Reentrancy in SplinterShare.prepareForPartherOrExchangeListing(address) (#1435-1439):
External calls:
- spsDividendTracker.excludeFromDividends(_partnerOrExchangeAddress) (#1436)
- decDividendTracker.excludeFromDividends(_partnerOrExchangeAddress) (#1437)
State variables written after the call(s):
- excludeFromFees(_partnerOrExchangeAddress,true) (#1438)
- isExcludedFromFees[account] = excluded (#1631)
Reentrancy in SpsDividendTracker.processAccount(address,bool) (#2258-2268):
External calls:
- amount = _withdrawDividendOfUser(account) (#2259)
- success = IERC20(dividendToken).transfer(user,_withdrawableDividend) (#644)
State variables written after the call(s):
- lastClaimTimes[account] = block.timestamp (#2262)
Reentrancy in DECDividendTracker.processAccount(address,bool) (#2475-2485):
External calls:
- amount = _withdrawDividendOfUser(account) (#2476)
- success = IERC20(dividendToken).transfer(user,_withdrawableDividend) (#644)
State variables written after the call(s):
- lastClaimTimes[account] = block.timestamp (#2479)
Reentrancy in SplinterShare.swapAndLiquify(uint256) (#1935-1949):
External calls:
- swapTokensForBNB(half) (#1942)
- uniswapV2Router.swapExactTokensForETHSupportingFeeOnTransferTokens(tokenAmount,0,path,address(this),block.timestamp) (#1999-2005)
- addLiquidity(otherHalf,newBalance) (#1946)
- uniswapV2Router.addLiquidityETH{value: bnbAmount}(address(this),tokenAmount,0,0,marketingWallet,block.timestamp) (#1957-1964)
External calls sending eth:
- addLiquidity(otherHalf,newBalance) (#1946)
- uniswapV2Router.addLiquidityETH{value: bnbAmount}(address(this),tokenAmount,0,0,marketingWallet,block.timestamp) (#1957-1964)
State variables written after the call(s):
- addLiquidity(otherHalf,newBalance) (#1946)
- _allowances[owner][spender] = amount (#443)
Reentrancy in SplinterShare.whitelistDxSale(address,address) (#1424-1433):
External calls:
- spsDividendTracker.excludeFromDividends(_presaleAddress) (#1426)
- decDividendTracker.excludeFromDividends(_presaleAddress) (#1427)
State variables written after the call(s):
- excludeFromFees(_presaleAddress,true) (#1428)
- isExcludedFromFees[account] = excluded (#1631)
Apply the check-effects-interactions pattern.

Additional information: link

Reentrancy in SplinterShare._setAutomatedMarketMakerPair(address,bool) (#1655-1665):
External calls:
- spsDividendTracker.excludeFromDividends(pair) (#1660)
- decDividendTracker.excludeFromDividends(pair) (#1661)
Event emitted after the call(s):
- SetAutomatedMarketMakerPair(pair,value) (#1664)
Reentrancy in SplinterShare._transfer(address,address,uint256) (#1817-1933):
External calls:
- swapTokensForBNB(swapTokens) (#1858)
- uniswapV2Router.swapExactTokensForETHSupportingFeeOnTransferTokens(tokenAmount,0,path,address(this),block.timestamp) (#1999-2005)
- buyBackAndBurn(buyBackBalance.div(10 ** 2).mul(rand())) (#1870)
- uniswapV2Router.swapExactETHForTokensSupportingFeeOnTransferTokens{value: amount}(0,path,marketingWallet,block.timestamp.add(300)) (#1976-1981)
External calls sending eth:
- transferToWallet(address(marketingWallet),marketingPortion) (#1861)
- recipient.transfer(amount) (#2041)
- transferToWallet(address(teamWallet),teamPortion) (#1862)
- recipient.transfer(amount) (#2041)
- buyBackAndBurn(buyBackBalance.div(10 ** 2).mul(rand())) (#1870)
- uniswapV2Router.swapExactETHForTokensSupportingFeeOnTransferTokens{value: amount}(0,path,marketingWallet,block.timestamp.add(300)) (#1976-1981)
Event emitted after the call(s):
- SwapBNBForTokens(amount,path) (#1987)
- buyBackAndBurn(buyBackBalance.div(10 ** 2).mul(rand())) (#1870)
- Transfer(account,address(0),amount) (#423)
- buyBackAndBurn(buyBackBalance.div(10 ** 2).mul(rand())) (#1870)
Reentrancy in SplinterShare._transfer(address,address,uint256) (#1817-1933):
External calls:
- swapTokensForBNB(swapTokens) (#1858)
- uniswapV2Router.swapExactTokensForETHSupportingFeeOnTransferTokens(tokenAmount,0,path,address(this),block.timestamp) (#1999-2005)
- swapTokensForBNB(swapTokens_scope_0) (#1873)
- uniswapV2Router.swapExactTokensForETHSupportingFeeOnTransferTokens(tokenAmount,0,path,address(this),block.timestamp) (#1999-2005)
External calls sending eth:
- transferToWallet(address(marketingWallet),marketingPortion) (#1861)
- recipient.transfer(amount) (#2041)
- transferToWallet(address(teamWallet),teamPortion) (#1862)
- recipient.transfer(amount) (#2041)
Event emitted after the call(s):
- Approval(owner,spender,amount) (#444)
- swapTokensForBNB(swapTokens_scope_0) (#1873)
Reentrancy in SplinterShare._transfer(address,address,uint256) (#1817-1933):
External calls:
- swapTokensForBNB(swapTokens) (#1858)
- uniswapV2Router.swapExactTokensForETHSupportingFeeOnTransferTokens(tokenAmount,0,path,address(this),block.timestamp) (#1999-2005)
- swapAndLiquify(contractTokenBalance.div(totalFees).mul(buyBackAndLiquidityFee)) (#1876)
- uniswapV2Router.addLiquidityETH{value: bnbAmount}(address(this),tokenAmount,0,0,marketingWallet,block.timestamp) (#1957-1964)
- uniswapV2Router.swapExactTokensForETHSupportingFeeOnTransferTokens(tokenAmount,0,path,address(this),block.timestamp) (#1999-2005)
External calls sending eth:
- transferToWallet(address(marketingWallet),marketingPortion) (#1861)
- recipient.transfer(amount) (#2041)
- transferToWallet(address(teamWallet),teamPortion) (#1862)
- recipient.transfer(amount) (#2041)
- swapAndLiquify(contractTokenBalance.div(totalFees).mul(buyBackAndLiquidityFee)) (#1876)
- uniswapV2Router.addLiquidityETH{value: bnbAmount}(address(this),tokenAmount,0,0,marketingWallet,block.timestamp) (#1957-1964)
Event emitted after the call(s):
- Approval(owner,spender,amount) (#444)
- swapAndLiquify(contractTokenBalance.div(totalFees).mul(buyBackAndLiquidityFee)) (#1876)
- SwapAndLiquify(half,newBalance,otherHalf) (#1948)
- swapAndLiquify(contractTokenBalance.div(totalFees).mul(buyBackAndLiquidityFee)) (#1876)
Reentrancy in SplinterShare._transfer(address,address,uint256) (#1817-1933):
External calls:
- swapTokensForBNB(swapTokens) (#1858)
- uniswapV2Router.swapExactTokensForETHSupportingFeeOnTransferTokens(tokenAmount,0,path,address(this),block.timestamp) (#1999-2005)
- buyBackAndBurn(buyBackBalance.div(10 ** 2).mul(rand())) (#1870)
- uniswapV2Router.swapExactETHForTokensSupportingFeeOnTransferTokens{value: amount}(0,path,marketingWallet,block.timestamp.add(300)) (#1976-1981)
- swapTokensForBNB(swapTokens_scope_0) (#1873)
- uniswapV2Router.swapExactTokensForETHSupportingFeeOnTransferTokens(tokenAmount,0,path,address(this),block.timestamp) (#1999-2005)
- swapAndLiquify(contractTokenBalance.div(totalFees).mul(buyBackAndLiquidityFee)) (#1876)
- uniswapV2Router.addLiquidityETH{value: bnbAmount}(address(this),tokenAmount,0,0,marketingWallet,block.timestamp) (#1957-1964)
- uniswapV2Router.swapExactTokensForETHSupportingFeeOnTransferTokens(tokenAmount,0,path,address(this),block.timestamp) (#1999-2005)
- swapAndSendSpsDividends(sellTokens.div(10 ** 2).mul(rand())) (#1882)
- success = IERC20(dividendToken).transfer(dividendTracker,amount) (#2045)
- dividendPayingTracker.distributeDividends(amount) (#2048)
- uniswapV2Router.swapExactTokensForTokensSupportingFeeOnTransferTokens(_tokenAmount,0,path,_recipient,block.timestamp) (#2019-2025)
External calls sending eth:
- transferToWallet(address(marketingWallet),marketingPortion) (#1861)
- recipient.transfer(amount) (#2041)
- transferToWallet(address(teamWallet),teamPortion) (#1862)
- recipient.transfer(amount) (#2041)
- buyBackAndBurn(buyBackBalance.div(10 ** 2).mul(rand())) (#1870)
- uniswapV2Router.swapExactETHForTokensSupportingFeeOnTransferTokens{value: amount}(0,path,marketingWallet,block.timestamp.add(300)) (#1976-1981)
- swapAndLiquify(contractTokenBalance.div(totalFees).mul(buyBackAndLiquidityFee)) (#1876)
- uniswapV2Router.addLiquidityETH{value: bnbAmount}(address(this),tokenAmount,0,0,marketingWallet,block.timestamp) (#1957-1964)
Event emitted after the call(s):
- Approval(owner,spender,amount) (#444)
- swapAndSendSpsDividends(sellTokens.div(10 ** 2).mul(rand())) (#1882)
- SendDividends(amount) (#2049)
- swapAndSendSpsDividends(sellTokens.div(10 ** 2).mul(rand())) (#1882)
Reentrancy in SplinterShare._transfer(address,address,uint256) (#1817-1933):
External calls:
- swapTokensForBNB(swapTokens) (#1858)
- uniswapV2Router.swapExactTokensForETHSupportingFeeOnTransferTokens(tokenAmount,0,path,address(this),block.timestamp) (#1999-2005)
- buyBackAndBurn(buyBackBalance.div(10 ** 2).mul(rand())) (#1870)
- uniswapV2Router.swapExactETHForTokensSupportingFeeOnTransferTokens{value: amount}(0,path,marketingWallet,block.timestamp.add(300)) (#1976-1981)
- swapTokensForBNB(swapTokens_scope_0) (#1873)
- uniswapV2Router.swapExactTokensForETHSupportingFeeOnTransferTokens(tokenAmount,0,path,address(this),block.timestamp) (#1999-2005)
- swapAndLiquify(contractTokenBalance.div(totalFees).mul(buyBackAndLiquidityFee)) (#1876)
- uniswapV2Router.addLiquidityETH{value: bnbAmount}(address(this),tokenAmount,0,0,marketingWallet,block.timestamp) (#1957-1964)
- uniswapV2Router.swapExactTokensForETHSupportingFeeOnTransferTokens(tokenAmount,0,path,address(this),block.timestamp) (#1999-2005)
- swapAndSendSpsDividends(sellTokens.div(10 ** 2).mul(rand())) (#1882)
- success = IERC20(dividendToken).transfer(dividendTracker,amount) (#2045)
- dividendPayingTracker.distributeDividends(amount) (#2048)
- uniswapV2Router.swapExactTokensForTokensSupportingFeeOnTransferTokens(_tokenAmount,0,path,_recipient,block.timestamp) (#2019-2025)
- swapAndSendDECDividends(sellTokens_scope_1.div(10 ** 2).mul(rand())) (#1887)
- success = IERC20(dividendToken).transfer(dividendTracker,amount) (#2045)
- dividendPayingTracker.distributeDividends(amount) (#2048)
- uniswapV2Router.swapExactTokensForTokensSupportingFeeOnTransferTokens(_tokenAmount,0,path,_recipient,block.timestamp) (#2019-2025)
External calls sending eth:
- transferToWallet(address(marketingWallet),marketingPortion) (#1861)
- recipient.transfer(amount) (#2041)
- transferToWallet(address(teamWallet),teamPortion) (#1862)
- recipient.transfer(amount) (#2041)
- buyBackAndBurn(buyBackBalance.div(10 ** 2).mul(rand())) (#1870)
- uniswapV2Router.swapExactETHForTokensSupportingFeeOnTransferTokens{value: amount}(0,path,marketingWallet,block.timestamp.add(300)) (#1976-1981)
- swapAndLiquify(contractTokenBalance.div(totalFees).mul(buyBackAndLiquidityFee)) (#1876)
- uniswapV2Router.addLiquidityETH{value: bnbAmount}(address(this),tokenAmount,0,0,marketingWallet,block.timestamp) (#1957-1964)
Event emitted after the call(s):
- Approval(owner,spender,amount) (#444)
- swapAndSendDECDividends(sellTokens_scope_1.div(10 ** 2).mul(rand())) (#1887)
- SendDividends(amount) (#2049)
- swapAndSendDECDividends(sellTokens_scope_1.div(10 ** 2).mul(rand())) (#1887)
- Transfer(sender,recipient,amount) (#383)
- super._transfer(from,to,amount) (#1909)
- Transfer(sender,recipient,amount) (#383)
- super._transfer(from,address(this),fees) (#1906)
Reentrancy in SplinterShare._transfer(address,address,uint256) (#1817-1933):
External calls:
- swapTokensForBNB(swapTokens) (#1858)
- uniswapV2Router.swapExactTokensForETHSupportingFeeOnTransferTokens(tokenAmount,0,path,address(this),block.timestamp) (#1999-2005)
- buyBackAndBurn(buyBackBalance.div(10 ** 2).mul(rand())) (#1870)
- uniswapV2Router.swapExactETHForTokensSupportingFeeOnTransferTokens{value: amount}(0,path,marketingWallet,block.timestamp.add(300)) (#1976-1981)
- swapTokensForBNB(swapTokens_scope_0) (#1873)
- uniswapV2Router.swapExactTokensForETHSupportingFeeOnTransferTokens(tokenAmount,0,path,address(this),block.timestamp) (#1999-2005)
- swapAndLiquify(contractTokenBalance.div(totalFees).mul(buyBackAndLiquidityFee)) (#1876)
- uniswapV2Router.addLiquidityETH{value: bnbAmount}(address(this),tokenAmount,0,0,marketingWallet,block.timestamp) (#1957-1964)
- uniswapV2Router.swapExactTokensForETHSupportingFeeOnTransferTokens(tokenAmount,0,path,address(this),block.timestamp) (#1999-2005)
- swapAndSendSpsDividends(sellTokens.div(10 ** 2).mul(rand())) (#1882)
- success = IERC20(dividendToken).transfer(dividendTracker,amount) (#2045)
- dividendPayingTracker.distributeDividends(amount) (#2048)
- uniswapV2Router.swapExactTokensForTokensSupportingFeeOnTransferTokens(_tokenAmount,0,path,_recipient,block.timestamp) (#2019-2025)
- swapAndSendDECDividends(sellTokens_scope_1.div(10 ** 2).mul(rand())) (#1887)
- success = IERC20(dividendToken).transfer(dividendTracker,amount) (#2045)
- dividendPayingTracker.distributeDividends(amount) (#2048)
- uniswapV2Router.swapExactTokensForTokensSupportingFeeOnTransferTokens(_tokenAmount,0,path,_recipient,block.timestamp) (#2019-2025)
- spsDividendTracker.setBalance(address(from),balanceOf(from)) (#1911)
- decDividendTracker.setBalance(address(from),balanceOf(from)) (#1912)
- spsDividendTracker.setBalance(address(to),balanceOf(to)) (#1913)
- decDividendTracker.setBalance(address(to),balanceOf(to)) (#1914)
- spsDividendTracker.process(gas) (#1919-1924)
External calls sending eth:
- transferToWallet(address(marketingWallet),marketingPortion) (#1861)
- recipient.transfer(amount) (#2041)
- transferToWallet(address(teamWallet),teamPortion) (#1862)
- recipient.transfer(amount) (#2041)
- buyBackAndBurn(buyBackBalance.div(10 ** 2).mul(rand())) (#1870)
- uniswapV2Router.swapExactETHForTokensSupportingFeeOnTransferTokens{value: amount}(0,path,marketingWallet,block.timestamp.add(300)) (#1976-1981)
- swapAndLiquify(contractTokenBalance.div(totalFees).mul(buyBackAndLiquidityFee)) (#1876)
- uniswapV2Router.addLiquidityETH{value: bnbAmount}(address(this),tokenAmount,0,0,marketingWallet,block.timestamp) (#1957-1964)
Event emitted after the call(s):
- ProcessedSpsDividendTracker(iterations,claims,lastProcessedIndex,true,gas,tx.origin) (#1920)
Reentrancy in SplinterShare._transfer(address,address,uint256) (#1817-1933):
External calls:
- swapTokensForBNB(swapTokens) (#1858)
- uniswapV2Router.swapExactTokensForETHSupportingFeeOnTransferTokens(tokenAmount,0,path,address(this),block.timestamp) (#1999-2005)
- buyBackAndBurn(buyBackBalance.div(10 ** 2).mul(rand())) (#1870)
- uniswapV2Router.swapExactETHForTokensSupportingFeeOnTransferTokens{value: amount}(0,path,marketingWallet,block.timestamp.add(300)) (#1976-1981)
- swapTokensForBNB(swapTokens_scope_0) (#1873)
- uniswapV2Router.swapExactTokensForETHSupportingFeeOnTransferTokens(tokenAmount,0,path,address(this),block.timestamp) (#1999-2005)
- swapAndLiquify(contractTokenBalance.div(totalFees).mul(buyBackAndLiquidityFee)) (#1876)
- uniswapV2Router.addLiquidityETH{value: bnbAmount}(address(this),tokenAmount,0,0,marketingWallet,block.timestamp) (#1957-1964)
- uniswapV2Router.swapExactTokensForETHSupportingFeeOnTransferTokens(tokenAmount,0,path,address(this),block.timestamp) (#1999-2005)
- swapAndSendSpsDividends(sellTokens.div(10 ** 2).mul(rand())) (#1882)
- success = IERC20(dividendToken).transfer(dividendTracker,amount) (#2045)
- dividendPayingTracker.distributeDividends(amount) (#2048)
- uniswapV2Router.swapExactTokensForTokensSupportingFeeOnTransferTokens(_tokenAmount,0,path,_recipient,block.timestamp) (#2019-2025)
- swapAndSendDECDividends(sellTokens_scope_1.div(10 ** 2).mul(rand())) (#1887)
- success = IERC20(dividendToken).transfer(dividendTracker,amount) (#2045)
- dividendPayingTracker.distributeDividends(amount) (#2048)
- uniswapV2Router.swapExactTokensForTokensSupportingFeeOnTransferTokens(_tokenAmount,0,path,_recipient,block.timestamp) (#2019-2025)
- spsDividendTracker.setBalance(address(from),balanceOf(from)) (#1911)
- decDividendTracker.setBalance(address(from),balanceOf(from)) (#1912)
- spsDividendTracker.setBalance(address(to),balanceOf(to)) (#1913)
- decDividendTracker.setBalance(address(to),balanceOf(to)) (#1914)
- spsDividendTracker.process(gas) (#1919-1924)
- decDividendTracker.process(gas) (#1926-1931)
External calls sending eth:
- transferToWallet(address(marketingWallet),marketingPortion) (#1861)
- recipient.transfer(amount) (#2041)
- transferToWallet(address(teamWallet),teamPortion) (#1862)
- recipient.transfer(amount) (#2041)
- buyBackAndBurn(buyBackBalance.div(10 ** 2).mul(rand())) (#1870)
- uniswapV2Router.swapExactETHForTokensSupportingFeeOnTransferTokens{value: amount}(0,path,marketingWallet,block.timestamp.add(300)) (#1976-1981)
- swapAndLiquify(contractTokenBalance.div(totalFees).mul(buyBackAndLiquidityFee)) (#1876)
- uniswapV2Router.addLiquidityETH{value: bnbAmount}(address(this),tokenAmount,0,0,marketingWallet,block.timestamp) (#1957-1964)
Event emitted after the call(s):
- ProcessedDECDividendTracker(iterations_scope_2,claims_scope_3,lastProcessedIndex_scope_4,true,gas,tx.origin) (#1927)
Reentrancy in SplinterShare.buyBackAndBurn(uint256) (#1967-1988):
External calls:
- uniswapV2Router.swapExactETHForTokensSupportingFeeOnTransferTokens{value: amount}(0,path,marketingWallet,block.timestamp.add(300)) (#1976-1981)
Event emitted after the call(s):
- SwapBNBForTokens(amount,path) (#1987)
- Transfer(account,address(0),amount) (#423)
- _burn(marketingWallet,swappedBalance) (#1985)
Reentrancy in SplinterShare.constructor() (#1382-1418):
External calls:
- _uniswapV2Pair = IUniswapV2Factory(_uniswapV2Router.factory()).createPair(address(this),_uniswapV2Router.WETH()) (#1393-1394)
- _setAutomatedMarketMakerPair(_uniswapV2Pair,true) (#1399)
- spsDividendTracker.excludeFromDividends(pair) (#1660)
- decDividendTracker.excludeFromDividends(pair) (#1661)
Event emitted after the call(s):
- SetAutomatedMarketMakerPair(pair,value) (#1664)
- _setAutomatedMarketMakerPair(_uniswapV2Pair,true) (#1399)
Reentrancy in SplinterShare.constructor() (#1382-1418):
External calls:
- _uniswapV2Pair = IUniswapV2Factory(_uniswapV2Router.factory()).createPair(address(this),_uniswapV2Router.WETH()) (#1393-1394)
- _setAutomatedMarketMakerPair(_uniswapV2Pair,true) (#1399)
- spsDividendTracker.excludeFromDividends(pair) (#1660)
- decDividendTracker.excludeFromDividends(pair) (#1661)
- excludeFromDividend(address(spsDividendTracker)) (#1401)
- spsDividendTracker.excludeFromDividends(address(account)) (#1637)
- decDividendTracker.excludeFromDividends(address(account)) (#1638)
- excludeFromDividend(address(decDividendTracker)) (#1402)
- spsDividendTracker.excludeFromDividends(address(account)) (#1637)
- decDividendTracker.excludeFromDividends(address(account)) (#1638)
- excludeFromDividend(address(this)) (#1403)
- spsDividendTracker.excludeFromDividends(address(account)) (#1637)
- decDividendTracker.excludeFromDividends(address(account)) (#1638)
- excludeFromDividend(address(_uniswapV2Router)) (#1404)
- spsDividendTracker.excludeFromDividends(address(account)) (#1637)
- decDividendTracker.excludeFromDividends(address(account)) (#1638)
- excludeFromDividend(deadAddress) (#1405)
- spsDividendTracker.excludeFromDividends(address(account)) (#1637)
- decDividendTracker.excludeFromDividends(address(account)) (#1638)
Event emitted after the call(s):
- ExcludeFromFees(account,excluded) (#1633)
- excludeFromFees(teamWallet,true) (#1409)
- ExcludeFromFees(account,excluded) (#1633)
- excludeFromFees(marketingWallet,true) (#1408)
- ExcludeFromFees(account,excluded) (#1633)
- excludeFromFees(owner(),true) (#1411)
- ExcludeFromFees(account,excluded) (#1633)
- excludeFromFees(address(this),true) (#1410)
- Transfer(address(0),account,amount) (#402)
- _mint(owner(),100000000000 * (10 ** 18)) (#1417)
Reentrancy in SplinterShare.prepareForPartherOrExchangeListing(address) (#1435-1439):
External calls:
- spsDividendTracker.excludeFromDividends(_partnerOrExchangeAddress) (#1436)
- decDividendTracker.excludeFromDividends(_partnerOrExchangeAddress) (#1437)
Event emitted after the call(s):
- ExcludeFromFees(account,excluded) (#1633)
- excludeFromFees(_partnerOrExchangeAddress,true) (#1438)
Reentrancy in SpsDividendTracker.processAccount(address,bool) (#2258-2268):
External calls:
- amount = _withdrawDividendOfUser(account) (#2259)
- success = IERC20(dividendToken).transfer(user,_withdrawableDividend) (#644)
Event emitted after the call(s):
- Claim(account,amount,automatic) (#2263)
Reentrancy in DECDividendTracker.processAccount(address,bool) (#2475-2485):
External calls:
- amount = _withdrawDividendOfUser(account) (#2476)
- success = IERC20(dividendToken).transfer(user,_withdrawableDividend) (#644)
Event emitted after the call(s):
- Claim(account,amount,automatic) (#2480)
Reentrancy in SplinterShare.processDividendTracker(uint256) (#1771-1777):
External calls:
- (spsIterations,spsClaims,spsLastProcessedIndex) = spsDividendTracker.process(gas) (#1772)
Event emitted after the call(s):
- ProcessedSpsDividendTracker(spsIterations,spsClaims,spsLastProcessedIndex,false,gas,tx.origin) (#1773)
Reentrancy in SplinterShare.processDividendTracker(uint256) (#1771-1777):
External calls:
- (spsIterations,spsClaims,spsLastProcessedIndex) = spsDividendTracker.process(gas) (#1772)
- (decIterations,decClaims,decLastProcessedIndex) = decDividendTracker.process(gas) (#1775)
Event emitted after the call(s):
- ProcessedDECDividendTracker(decIterations,decClaims,decLastProcessedIndex,false,gas,tx.origin) (#1776)
Reentrancy in SplinterShare.swapAndLiquify(uint256) (#1935-1949):
External calls:
- swapTokensForBNB(half) (#1942)
- uniswapV2Router.swapExactTokensForETHSupportingFeeOnTransferTokens(tokenAmount,0,path,address(this),block.timestamp) (#1999-2005)
- addLiquidity(otherHalf,newBalance) (#1946)
- uniswapV2Router.addLiquidityETH{value: bnbAmount}(address(this),tokenAmount,0,0,marketingWallet,block.timestamp) (#1957-1964)
External calls sending eth:
- addLiquidity(otherHalf,newBalance) (#1946)
- uniswapV2Router.addLiquidityETH{value: bnbAmount}(address(this),tokenAmount,0,0,marketingWallet,block.timestamp) (#1957-1964)
Event emitted after the call(s):
- Approval(owner,spender,amount) (#444)
- addLiquidity(otherHalf,newBalance) (#1946)
- SwapAndLiquify(half,newBalance,otherHalf) (#1948)
Reentrancy in SplinterShare.swapAndSendDECDividends(uint256) (#2034-2038):
External calls:
- swapTokensForDividendToken(tokens,address(this),decDividendToken) (#2035)
- uniswapV2Router.swapExactTokensForTokensSupportingFeeOnTransferTokens(_tokenAmount,0,path,_recipient,block.timestamp) (#2019-2025)
- transferDividends(decDividendToken,address(decDividendTracker),decDividendTracker,decDividends) (#2037)
- success = IERC20(dividendToken).transfer(dividendTracker,amount) (#2045)
- dividendPayingTracker.distributeDividends(amount) (#2048)
Event emitted after the call(s):
- SendDividends(amount) (#2049)
- transferDividends(decDividendToken,address(decDividendTracker),decDividendTracker,decDividends) (#2037)
Reentrancy in SplinterShare.swapAndSendSpsDividends(uint256) (#2028-2032):
External calls:
- swapTokensForDividendToken(tokens,address(this),spsDividendToken) (#2029)
- uniswapV2Router.swapExactTokensForTokensSupportingFeeOnTransferTokens(_tokenAmount,0,path,_recipient,block.timestamp) (#2019-2025)
- transferDividends(spsDividendToken,address(spsDividendTracker),spsDividendTracker,spsDividends) (#2031)
- success = IERC20(dividendToken).transfer(dividendTracker,amount) (#2045)
- dividendPayingTracker.distributeDividends(amount) (#2048)
Event emitted after the call(s):
- SendDividends(amount) (#2049)
- transferDividends(spsDividendToken,address(spsDividendTracker),spsDividendTracker,spsDividends) (#2031)
Reentrancy in SplinterShare.transferDividends(address,address,DividendPayingToken,uint256) (#2044-2051):
External calls:
- success = IERC20(dividendToken).transfer(dividendTracker,amount) (#2045)
- dividendPayingTracker.distributeDividends(amount) (#2048)
Event emitted after the call(s):
- SendDividends(amount) (#2049)
Reentrancy in SplinterShare.updateDECDividendTracker(address) (#1582-1597):
External calls:
- newDECDividendTracker.excludeFromDividends(address(newDECDividendTracker)) (#1589)
- newDECDividendTracker.excludeFromDividends(address(this)) (#1590)
- newDECDividendTracker.excludeFromDividends(address(uniswapV2Router)) (#1591)
- newDECDividendTracker.excludeFromDividends(address(deadAddress)) (#1592)
Event emitted after the call(s):
- UpdateDECDividendTracker(newAddress,address(decDividendTracker)) (#1594)
Reentrancy in SplinterShare.updateSpsDividendTracker(address) (#1565-1580):
External calls:
- newSpsDividendTracker.excludeFromDividends(address(newSpsDividendTracker)) (#1572)
- newSpsDividendTracker.excludeFromDividends(address(this)) (#1573)
- newSpsDividendTracker.excludeFromDividends(address(uniswapV2Router)) (#1574)
- newSpsDividendTracker.excludeFromDividends(address(deadAddress)) (#1575)
Event emitted after the call(s):
- UpdateSpsDividendTracker(newAddress,address(spsDividendTracker)) (#1577)
Reentrancy in SplinterShare.whitelistDxSale(address,address) (#1424-1433):
External calls:
- spsDividendTracker.excludeFromDividends(_presaleAddress) (#1426)
- decDividendTracker.excludeFromDividends(_presaleAddress) (#1427)
Event emitted after the call(s):
- ExcludeFromFees(account,excluded) (#1633)
- excludeFromFees(_presaleAddress,true) (#1428)
Reentrancy in SplinterShare.whitelistDxSale(address,address) (#1424-1433):
External calls:
- spsDividendTracker.excludeFromDividends(_presaleAddress) (#1426)
- decDividendTracker.excludeFromDividends(_presaleAddress) (#1427)
- spsDividendTracker.excludeFromDividends(_routerAddress) (#1430)
- decDividendTracker.excludeFromDividends(_routerAddress) (#1431)
Event emitted after the call(s):
- ExcludeFromFees(account,excluded) (#1633)
- excludeFromFees(_routerAddress,true) (#1432)
Apply the check-effects-interactions pattern.

Additional information: link

SplinterShare.rand() (#1779-1795) uses timestamp for comparisons
Dangerous comparisons:
- randNumber == 0 (#1789)
SplinterShare._transfer(address,address,uint256) (#1817-1933) uses timestamp for comparisons
Dangerous comparisons:
- buyBackOrLiquidity <= 50 (#1867)
- buyBackOrLiquidity > 50 (#1875)
SpsDividendTracker.getAccount(address) (#2122-2165) uses timestamp for comparisons
Dangerous comparisons:
- nextClaimTime > block.timestamp (#2162-2164)
SpsDividendTracker.canAutoClaim(uint256) (#2186-2192) uses timestamp for comparisons
Dangerous comparisons:
- lastClaimTime > block.timestamp (#2187)
- block.timestamp.sub(lastClaimTime) >= claimWait (#2191)
DECDividendTracker.getAccount(address) (#2339-2382) uses timestamp for comparisons
Dangerous comparisons:
- nextClaimTime > block.timestamp (#2379-2381)
DECDividendTracker.canAutoClaim(uint256) (#2403-2409) uses timestamp for comparisons
Dangerous comparisons:
- lastClaimTime > block.timestamp (#2404)
- block.timestamp.sub(lastClaimTime) >= claimWait (#2408)
Avoid relying on block.timestamp.

Additional information: link

SplinterShare.setBuyBackAndLiquifyEnabled(bool) (#1505-1518) compares to a boolean constant:
-_enabled == false (#1507)
SplinterShare.setSpsDividendEnabled(bool) (#1520-1533) compares to a boolean constant:
-_enabled == false (#1522)
SplinterShare.setDECDividendEnabled(bool) (#1535-1548) compares to a boolean constant:
-_enabled == false (#1537)
SplinterShare.setMarketingEnabled(bool) (#1550-1563) compares to a boolean constant:
-_enabled == false (#1552)
Remove the equality to the boolean constant.

Additional information: link

Context._msgData() (#24-27) is never used and should be removed
DividendPayingToken._transfer(address,address,uint256) (#695-701) is never used and should be removed
ERC20._setupDecimals(uint8) (#454-456) is never used and should be removed
SafeMath.div(uint256,uint256,string) (#1194-1197) is never used and should be removed
SafeMath.mod(uint256,uint256) (#1156-1159) is never used and should be removed
SafeMath.mod(uint256,uint256,string) (#1214-1217) is never used and should be removed
SafeMath.tryAdd(uint256,uint256) (#1028-1032) is never used and should be removed
SafeMath.tryDiv(uint256,uint256) (#1064-1067) is never used and should be removed
SafeMath.tryMod(uint256,uint256) (#1074-1077) is never used and should be removed
SafeMath.tryMul(uint256,uint256) (#1049-1057) is never used and should be removed
SafeMath.trySub(uint256,uint256) (#1039-1042) is never used and should be removed
SafeMathInt.div(int256,int256) (#1237-1243) is never used and should be removed
SafeMathInt.mul(int256,int256) (#1227-1235) is never used and should be removed
Remove unused functions.

Additional information: link

Parameter DividendPayingToken.dividendOf(address)._owner (#661) is not in mixedCase
Parameter DividendPayingToken.withdrawableDividendOf(address)._owner (#668) is not in mixedCase
Parameter DividendPayingToken.withdrawnDividendOf(address)._owner (#675) is not in mixedCase
Parameter DividendPayingToken.accumulativeDividendOf(address)._owner (#685) is not in mixedCase
Constant DividendPayingToken.magnitude (#556) is not in UPPER_CASE_WITH_UNDERSCORES
Function IUniswapV2Pair.DOMAIN_SEPARATOR() (#773) is not in mixedCase
Function IUniswapV2Pair.PERMIT_TYPEHASH() (#774) is not in mixedCase
Function IUniswapV2Pair.MINIMUM_LIQUIDITY() (#791) is not in mixedCase
Function IUniswapV2Router01.WETH() (#811) is not in mixedCase
Parameter SplinterShare.whitelistDxSale(address,address)._presaleAddress (#1424) is not in mixedCase
Parameter SplinterShare.whitelistDxSale(address,address)._routerAddress (#1424) is not in mixedCase
Parameter SplinterShare.prepareForPartherOrExchangeListing(address)._partnerOrExchangeAddress (#1435) is not in mixedCase
Parameter SplinterShare.setMaxBuyTransaction(uint256)._maxTxn (#1441) is not in mixedCase
Parameter SplinterShare.setMaxSellTransaction(uint256)._maxTxn (#1445) is not in mixedCase
Parameter SplinterShare.updateDECDividendToken(address)._newContract (#1449) is not in mixedCase
Parameter SplinterShare.updateSpsDividendToken(address)._newContract (#1454) is not in mixedCase
Parameter SplinterShare.updateTeamWallet(address)._newWallet (#1459) is not in mixedCase
Parameter SplinterShare.updateMarketingWallet(address)._newWallet (#1466) is not in mixedCase
Parameter SplinterShare.setMaxWalletTokend(uint256)._maxToken (#1473) is not in mixedCase
Parameter SplinterShare.setSwapTokensAtAmount(uint256)._swapAmount (#1477) is not in mixedCase
Parameter SplinterShare.setSellTransactionMultiplier(uint256)._multiplier (#1481) is not in mixedCase
Parameter SplinterShare.setTradingIsEnabled(bool)._enabled (#1501) is not in mixedCase
Parameter SplinterShare.setBuyBackAndLiquifyEnabled(bool)._enabled (#1505) is not in mixedCase
Parameter SplinterShare.setSpsDividendEnabled(bool)._enabled (#1520) is not in mixedCase
Parameter SplinterShare.setDECDividendEnabled(bool)._enabled (#1535) is not in mixedCase
Parameter SplinterShare.setMarketingEnabled(bool)._enabled (#1550) is not in mixedCase
Parameter SplinterShare.swapTokensForDividendToken(uint256,address,address)._tokenAmount (#2009) is not in mixedCase
Parameter SplinterShare.swapTokensForDividendToken(uint256,address,address)._recipient (#2009) is not in mixedCase
Parameter SplinterShare.swapTokensForDividendToken(uint256,address,address)._dividendAddress (#2009) is not in mixedCase
Parameter SpsDividendTracker.updateMinimumTokenBalanceForDividends(uint256)._newMinimumBalance (#2091) is not in mixedCase
Parameter SpsDividendTracker.getAccount(address)._account (#2122) is not in mixedCase
Parameter DECDividendTracker.updateMinimumTokenBalanceForDividends(uint256)._newMinimumBalance (#2308) is not in mixedCase
Parameter DECDividendTracker.getAccount(address)._account (#2339) is not in mixedCase
Follow the Solidity naming convention.

Additional information: link

Redundant expression "this (#25)" inContext (#19-28)
Remove redundant statements if they congest code but offer no value.

Additional information: link

Reentrancy in SplinterShare._transfer(address,address,uint256) (#1817-1933):
External calls:
- transferToWallet(address(marketingWallet),marketingPortion) (#1861)
- recipient.transfer(amount) (#2041)
- transferToWallet(address(teamWallet),teamPortion) (#1862)
- recipient.transfer(amount) (#2041)
External calls sending eth:
- transferToWallet(address(marketingWallet),marketingPortion) (#1861)
- recipient.transfer(amount) (#2041)
- transferToWallet(address(teamWallet),teamPortion) (#1862)
- recipient.transfer(amount) (#2041)
- buyBackAndBurn(buyBackBalance.div(10 ** 2).mul(rand())) (#1870)
- uniswapV2Router.swapExactETHForTokensSupportingFeeOnTransferTokens{value: amount}(0,path,marketingWallet,block.timestamp.add(300)) (#1976-1981)
State variables written after the call(s):
- buyBackAndBurn(buyBackBalance.div(10 ** 2).mul(rand())) (#1870)
- _balances[account] = _balances[account].sub(amount,ERC20: burn amount exceeds balance) (#421)
- buyBackAndBurn(buyBackBalance.div(10 ** 2).mul(rand())) (#1870)
- _totalSupply = _totalSupply.sub(amount) (#422)
Event emitted after the call(s):
- SwapBNBForTokens(amount,path) (#1987)
- buyBackAndBurn(buyBackBalance.div(10 ** 2).mul(rand())) (#1870)
- Transfer(account,address(0),amount) (#423)
- buyBackAndBurn(buyBackBalance.div(10 ** 2).mul(rand())) (#1870)
Reentrancy in SplinterShare._transfer(address,address,uint256) (#1817-1933):
External calls:
- transferToWallet(address(marketingWallet),marketingPortion) (#1861)
- recipient.transfer(amount) (#2041)
- transferToWallet(address(teamWallet),teamPortion) (#1862)
- recipient.transfer(amount) (#2041)
State variables written after the call(s):
- swapTokensForBNB(swapTokens_scope_0) (#1873)
- _allowances[owner][spender] = amount (#443)
Event emitted after the call(s):
- Approval(owner,spender,amount) (#444)
- swapTokensForBNB(swapTokens_scope_0) (#1873)
Reentrancy in SplinterShare._transfer(address,address,uint256) (#1817-1933):
External calls:
- transferToWallet(address(marketingWallet),marketingPortion) (#1861)
- recipient.transfer(amount) (#2041)
- transferToWallet(address(teamWallet),teamPortion) (#1862)
- recipient.transfer(amount) (#2041)
External calls sending eth:
- transferToWallet(address(marketingWallet),marketingPortion) (#1861)
- recipient.transfer(amount) (#2041)
- transferToWallet(address(teamWallet),teamPortion) (#1862)
- recipient.transfer(amount) (#2041)
- swapAndLiquify(contractTokenBalance.div(totalFees).mul(buyBackAndLiquidityFee)) (#1876)
- uniswapV2Router.addLiquidityETH{value: bnbAmount}(address(this),tokenAmount,0,0,marketingWallet,block.timestamp) (#1957-1964)
State variables written after the call(s):
- swapAndLiquify(contractTokenBalance.div(totalFees).mul(buyBackAndLiquidityFee)) (#1876)
- _allowances[owner][spender] = amount (#443)
Event emitted after the call(s):
- Approval(owner,spender,amount) (#444)
- swapAndLiquify(contractTokenBalance.div(totalFees).mul(buyBackAndLiquidityFee)) (#1876)
- SwapAndLiquify(half,newBalance,otherHalf) (#1948)
- swapAndLiquify(contractTokenBalance.div(totalFees).mul(buyBackAndLiquidityFee)) (#1876)
Reentrancy in SplinterShare._transfer(address,address,uint256) (#1817-1933):
External calls:
- transferToWallet(address(marketingWallet),marketingPortion) (#1861)
- recipient.transfer(amount) (#2041)
- transferToWallet(address(teamWallet),teamPortion) (#1862)
- recipient.transfer(amount) (#2041)
External calls sending eth:
- transferToWallet(address(marketingWallet),marketingPortion) (#1861)
- recipient.transfer(amount) (#2041)
- transferToWallet(address(teamWallet),teamPortion) (#1862)
- recipient.transfer(amount) (#2041)
- buyBackAndBurn(buyBackBalance.div(10 ** 2).mul(rand())) (#1870)
- uniswapV2Router.swapExactETHForTokensSupportingFeeOnTransferTokens{value: amount}(0,path,marketingWallet,block.timestamp.add(300)) (#1976-1981)
- swapAndLiquify(contractTokenBalance.div(totalFees).mul(buyBackAndLiquidityFee)) (#1876)
- uniswapV2Router.addLiquidityETH{value: bnbAmount}(address(this),tokenAmount,0,0,marketingWallet,block.timestamp) (#1957-1964)
State variables written after the call(s):
- swapAndSendSpsDividends(sellTokens.div(10 ** 2).mul(rand())) (#1882)
- _allowances[owner][spender] = amount (#443)
- swapAndSendDECDividends(sellTokens_scope_1.div(10 ** 2).mul(rand())) (#1887)
- _allowances[owner][spender] = amount (#443)
- super._transfer(from,address(this),fees) (#1906)
- _balances[sender] = _balances[sender].sub(amount,ERC20: transfer amount exceeds balance) (#381)
- _balances[recipient] = _balances[recipient].add(amount) (#382)
- super._transfer(from,to,amount) (#1909)
- _balances[sender] = _balances[sender].sub(amount,ERC20: transfer amount exceeds balance) (#381)
- _balances[recipient] = _balances[recipient].add(amount) (#382)
- swapping = false (#1890)
Event emitted after the call(s):
- Approval(owner,spender,amount) (#444)
- swapAndSendDECDividends(sellTokens_scope_1.div(10 ** 2).mul(rand())) (#1887)
- Approval(owner,spender,amount) (#444)
- swapAndSendSpsDividends(sellTokens.div(10 ** 2).mul(rand())) (#1882)
- ProcessedDECDividendTracker(iterations_scope_2,claims_scope_3,lastProcessedIndex_scope_4,true,gas,tx.origin) (#1927)
- ProcessedSpsDividendTracker(iterations,claims,lastProcessedIndex,true,gas,tx.origin) (#1920)
- SendDividends(amount) (#2049)
- swapAndSendSpsDividends(sellTokens.div(10 ** 2).mul(rand())) (#1882)
- SendDividends(amount) (#2049)
- swapAndSendDECDividends(sellTokens_scope_1.div(10 ** 2).mul(rand())) (#1887)
- Transfer(sender,recipient,amount) (#383)
- super._transfer(from,address(this),fees) (#1906)
- Transfer(sender,recipient,amount) (#383)
- super._transfer(from,to,amount) (#1909)
Apply the check-effects-interactions pattern.

Additional information: link

Variable IUniswapV2Router01.addLiquidity(address,address,uint256,uint256,uint256,uint256,address,uint256).amountADesired (#816) is too similar to IUniswapV2Router01.addLiquidity(address,address,uint256,uint256,uint256,uint256,address,uint256).amountBDesired (#817)
Variable DividendPayingToken._withdrawDividendOfUser(address)._withdrawableDividend (#640) is too similar to SpsDividendTracker.getAccount(address).withdrawableDividends (#2127)
Variable DividendPayingToken._withdrawDividendOfUser(address)._withdrawableDividend (#640) is too similar to DECDividendTracker.getAccount(address).withdrawableDividends (#2344)
Prevent variables from having similar names.

Additional information: link

SplinterShare.constructor() (#1382-1418) uses literals with too many digits:
- _mint(owner(),100000000000 * (10 ** 18)) (#1417)
SplinterShare.afterPreSale() (#1485-1499) uses literals with too many digits:
- swapTokensAtAmount = 20000000 * (10 ** 18) (#1495)
SplinterShare.afterPreSale() (#1485-1499) uses literals with too many digits:
- maxBuyTranscationAmount = 100000000000 * (10 ** 18) (#1496)
SplinterShare.afterPreSale() (#1485-1499) uses literals with too many digits:
- maxSellTransactionAmount = 300000000 * (10 ** 18) (#1497)
SplinterShare.afterPreSale() (#1485-1499) uses literals with too many digits:
- maxWalletToken = 100000000000 * (10 ** 18) (#1498)
SplinterShare.slitherConstructorVariables() (#1279-2052) uses literals with too many digits:
- deadAddress = 0x000000000000000000000000000000000000dEaD (#1287)
SplinterShare.slitherConstructorVariables() (#1279-2052) uses literals with too many digits:
- gasForProcessing = 600000 (#1319)
SpsDividendTracker.constructor() (#2074-2077) uses literals with too many digits:
- minimumTokenBalanceForDividends = 200000 * (10 ** 18) (#2076)
SpsDividendTracker.getAccountAtIndex(uint256) (#2167-2184) uses literals with too many digits:
- (0x0000000000000000000000000000000000000000,- 1,- 1,0,0,0,0,0) (#2178)
DECDividendTracker.constructor() (#2291-2294) uses literals with too many digits:
- minimumTokenBalanceForDividends = 200000 * (10 ** 18) (#2293)
DECDividendTracker.getAccountAtIndex(uint256) (#2384-2401) uses literals with too many digits:
- (0x0000000000000000000000000000000000000000,- 1,- 1,0,0,0,0,0) (#2395)
Use: Ether suffix, Time suffix, or The scientific notation

Additional information: link

DividendPayingToken.lastAmount (#559) is never used in SpsDividendTracker (#2054-2269)
DividendPayingToken.lastAmount (#559) is never used in DECDividendTracker (#2271-2487)
Remove unused state variables.

Additional information: link

DividendPayingToken.lastAmount (#559) should be constant
SplinterShare.deadAddress (#1287) should be constant
Add the constant attributes to state variables that never change.

Additional information: link

renounceOwnership() should be declared external:
- Ownable.renounceOwnership() (#80-83)
transferOwnership(address) should be declared external:
- Ownable.transferOwnership(address) (#89-93)
lock(uint256) should be declared external:
- Ownable.lock(uint256) (#97-102)
name() should be declared external:
- ERC20.name() (#231-233)
symbol() should be declared external:
- ERC20.symbol() (#239-241)
decimals() should be declared external:
- ERC20.decimals() (#256-258)
transfer(address,uint256) should be declared external:
- ERC20.transfer(address,uint256) (#282-285)
allowance(address,address) should be declared external:
- ERC20.allowance(address,address) (#290-292)
approve(address,uint256) should be declared external:
- ERC20.approve(address,uint256) (#301-304)
transferFrom(address,address,uint256) should be declared external:
- ERC20.transferFrom(address,address,uint256) (#319-323)
increaseAllowance(address,uint256) should be declared external:
- ERC20.increaseAllowance(address,uint256) (#337-340)
decreaseAllowance(address,uint256) should be declared external:
- ERC20.decreaseAllowance(address,uint256) (#356-359)
distributeDividends() should be declared external:
- DividendPayingToken.distributeDividends() (#599-610)
distributeDividends(uint256) should be declared external:
- DividendPayingToken.distributeDividends(uint256) (#613-624)
withdrawDividend() should be declared external:
- DECDividendTracker.withdrawDividend() (#2300-2302)
- DividendPayingToken.withdrawDividend() (#628-630)
- SpsDividendTracker.withdrawDividend() (#2083-2085)
dividendOf(address) should be declared external:
- DividendPayingToken.dividendOf(address) (#661-663)
withdrawnDividendOf(address) should be declared external:
- DividendPayingToken.withdrawnDividendOf(address) (#675-677)
get(IterableMapping.Map,address) should be declared external:
- IterableMapping.get(IterableMapping.Map,address) (#957-959)
getIndexOfKey(IterableMapping.Map,address) should be declared external:
- IterableMapping.getIndexOfKey(IterableMapping.Map,address) (#961-966)
getKeyAtIndex(IterableMapping.Map,uint256) should be declared external:
- IterableMapping.getKeyAtIndex(IterableMapping.Map,uint256) (#968-970)
size(IterableMapping.Map) should be declared external:
- IterableMapping.size(IterableMapping.Map) (#974-976)
setAutomatedMarketMakerPair(address,bool) should be declared external:
- SplinterShare.setAutomatedMarketMakerPair(address,bool) (#1649-1653)
getIsExcludedFromFees(address) should be declared external:
- SplinterShare.getIsExcludedFromFees(address) (#1699-1701)
getAccountAtIndex(uint256) should be declared external:
- SpsDividendTracker.getAccountAtIndex(uint256) (#2167-2184)
process(uint256) should be declared external:
- SpsDividendTracker.process(uint256) (#2211-2256)
getAccountAtIndex(uint256) should be declared external:
- DECDividendTracker.getAccountAtIndex(uint256) (#2384-2401)
process(uint256) should be declared external:
- DECDividendTracker.process(uint256) (#2428-2473)
Use the external attribute for functions never called from the contract.

Additional information: link

Token seems to be untradeable: there is no PancakeSwap trading pair and no trading volumes. Ignore for presale.

Number of Binance Smart Chain (BSC) token holders is less than 100. Token is either dead or inactive. Ignore for presale.

Unable to find website, listings and other project-related information

Token has no active CoinGecko listing / rank

Token has no active CoinMarketCap listing / rank

Young tokens have high risks of price dump / death