PULI INU Token Logo

PULI [PULI INU] Token

About PULI

Listings

Token 7 months
CoinGecko 6 months
CoinMarketCap 6 months
white paper

Puli (PULI) delivers simple yet very addicting P2E games. The first game, Puli Runner, was successfully launched on 31 January 2022. The team is also developing a platform to Swap, Play, Chat and Earn tokens while introducing new investors to crypto in an enjoyable way.

The purpose and key features of the token include a 10% Buy and 10% Sell tax that are used to fund aggressive marketing and ensure stable liquidity. In addition, the asset can be staked for added earnings with instructions available at their website.

The token has been audited by Coinscope, InterFi Network and Certik. The contract owner has been KYCd as part of the audits. The entire team is doxxed to the community. Finally, the token has carried out the remarkable achievement of being listed on Safemoon Swap and Wallet

Laser Scorebeta Last Audit: 11 April 2022

report
Token seems to be (relatively) fine. It still become a scam, but probability is moderate.

PULIINU.swapETHForTokens(uint256) (#1537-1551) sends eth to arbitrary user
Dangerous calls:
- uniswapV2Router.swapExactETHForTokensSupportingFeeOnTransferTokens{value: amount}(0,path,address(0xdead),block.timestamp.add(300)) (#1544-1549)
PULIINU.addLiquidity(uint256,uint256) (#1553-1566) sends eth to arbitrary user
Dangerous calls:
- uniswapV2Router.addLiquidityETH{value: ethAmount}(address(this),tokenAmount,0,0,owner(),block.timestamp) (#1558-1565)
Ensure that an arbitrary user cannot withdraw unauthorized funds.

Additional information: link

Reentrancy in PULIINU._transfer(address,address,uint256) (#1408-1486):
External calls:
- swapETHForTokens(buybackLimit.div(10)) (#1434)
- uniswapV2Router.swapExactETHForTokensSupportingFeeOnTransferTokens{value: amount}(0,path,address(0xdead),block.timestamp.add(300)) (#1544-1549)
- swapAndSendFee(forMarketing) (#1467)
- uniswapV2Router.swapExactTokensForETHSupportingFeeOnTransferTokens(tokenAmount,0,path,address(this),block.timestamp) (#1528-1534)
External calls sending eth:
- swapETHForTokens(buybackLimit.div(10)) (#1434)
- uniswapV2Router.swapExactETHForTokensSupportingFeeOnTransferTokens{value: amount}(0,path,address(0xdead),block.timestamp.add(300)) (#1544-1549)
- swapAndSendFee(forMarketing) (#1467)
- address(_marketingWallet).transfer(newBalance) (#1516)
State variables written after the call(s):
- swapAndSendFee(forMarketing) (#1467)
- inSwapAndLiquify = true (#883)
- inSwapAndLiquify = false (#885)
Reentrancy in PULIINU._transfer(address,address,uint256) (#1408-1486):
External calls:
- swapETHForTokens(buybackLimit.div(10)) (#1434)
- uniswapV2Router.swapExactETHForTokensSupportingFeeOnTransferTokens{value: amount}(0,path,address(0xdead),block.timestamp.add(300)) (#1544-1549)
- swapAndSendFee(forMarketing) (#1467)
- uniswapV2Router.swapExactTokensForETHSupportingFeeOnTransferTokens(tokenAmount,0,path,address(this),block.timestamp) (#1528-1534)
- swapTokensForEth(forBuyBack) (#1470)
- uniswapV2Router.swapExactTokensForETHSupportingFeeOnTransferTokens(tokenAmount,0,path,address(this),block.timestamp) (#1528-1534)
External calls sending eth:
- swapETHForTokens(buybackLimit.div(10)) (#1434)
- uniswapV2Router.swapExactETHForTokensSupportingFeeOnTransferTokens{value: amount}(0,path,address(0xdead),block.timestamp.add(300)) (#1544-1549)
- swapAndSendFee(forMarketing) (#1467)
- address(_marketingWallet).transfer(newBalance) (#1516)
State variables written after the call(s):
- swapTokensForEth(forBuyBack) (#1470)
- inSwapAndLiquify = true (#883)
- inSwapAndLiquify = false (#885)
Reentrancy in PULIINU._transfer(address,address,uint256) (#1408-1486):
External calls:
- swapETHForTokens(buybackLimit.div(10)) (#1434)
- uniswapV2Router.swapExactETHForTokensSupportingFeeOnTransferTokens{value: amount}(0,path,address(0xdead),block.timestamp.add(300)) (#1544-1549)
- swapAndSendFee(forMarketing) (#1467)
- uniswapV2Router.swapExactTokensForETHSupportingFeeOnTransferTokens(tokenAmount,0,path,address(this),block.timestamp) (#1528-1534)
- swapTokensForEth(forBuyBack) (#1470)
- uniswapV2Router.swapExactTokensForETHSupportingFeeOnTransferTokens(tokenAmount,0,path,address(this),block.timestamp) (#1528-1534)
- swapAndLiquify(contractTokenBalance - forMarketing - forBuyBack) (#1473)
- uniswapV2Router.addLiquidityETH{value: ethAmount}(address(this),tokenAmount,0,0,owner(),block.timestamp) (#1558-1565)
- uniswapV2Router.swapExactTokensForETHSupportingFeeOnTransferTokens(tokenAmount,0,path,address(this),block.timestamp) (#1528-1534)
External calls sending eth:
- swapETHForTokens(buybackLimit.div(10)) (#1434)
- uniswapV2Router.swapExactETHForTokensSupportingFeeOnTransferTokens{value: amount}(0,path,address(0xdead),block.timestamp.add(300)) (#1544-1549)
- swapAndSendFee(forMarketing) (#1467)
- address(_marketingWallet).transfer(newBalance) (#1516)
- swapAndLiquify(contractTokenBalance - forMarketing - forBuyBack) (#1473)
- uniswapV2Router.addLiquidityETH{value: ethAmount}(address(this),tokenAmount,0,0,owner(),block.timestamp) (#1558-1565)
State variables written after the call(s):
- _tokenTransfer(from,to,amount,takeFee) (#1485)
- _rOwned[address(this)] = _rOwned[address(this)].add(rLiquidity) (#1321)
- _rOwned[address(this)] = _rOwned[address(this)].add(rMarketing).add(rBuyBack) (#1333)
- _rOwned[sender] = _rOwned[sender].sub(rAmount) (#1651)
- _rOwned[sender] = _rOwned[sender].sub(rAmount) (#1627)
- _rOwned[sender] = _rOwned[sender].sub(rAmount) (#1702)
- _rOwned[sender] = _rOwned[sender].sub(rAmount) (#1677)
- _rOwned[recipient] = _rOwned[recipient].add(rTransferAmount) (#1628)
- _rOwned[recipient] = _rOwned[recipient].add(rTransferAmount) (#1678)
- _rOwned[recipient] = _rOwned[recipient].add(rTransferAmount) (#1653)
- _rOwned[recipient] = _rOwned[recipient].add(rTransferAmount) (#1704)
- _tokenTransfer(from,to,amount,takeFee) (#1485)
- _rTotal = _rTotal.sub(rFee) (#1208)
- _tokenTransfer(from,to,amount,takeFee) (#1485)
- _tOwned[address(this)] = _tOwned[address(this)].add(tMarketing).add(tBuyBack) (#1334)
- _tOwned[address(this)] = _tOwned[address(this)].add(tLiquidity) (#1323)
- _tOwned[sender] = _tOwned[sender].sub(tAmount) (#1701)
- _tOwned[sender] = _tOwned[sender].sub(tAmount) (#1676)
- _tOwned[recipient] = _tOwned[recipient].add(tTransferAmount) (#1652)
- _tOwned[recipient] = _tOwned[recipient].add(tTransferAmount) (#1703)
- swapAndLiquify(contractTokenBalance - forMarketing - forBuyBack) (#1473)
- inSwapAndLiquify = true (#883)
- inSwapAndLiquify = false (#885)
Apply the check-effects-interactions pattern.

Additional information: link

PULIINU.claimStuckTokens(address) (#1191-1202) ignores return value by erc20token.transfer(owner(),balance) (#1201)
Use SafeERC20, or ensure that the transfer/transferFrom return value is checked.

Additional information: link


Combination 1: Reentrancy vulnerabilities + Functions that send Ether to arbitraty destination. Usual for scams. May be justified by some complex mechanics (e.g. rebase, reflections). DYOR & manual audit are advised.


Combination 2: Unchecked transfer + Functions that send Ether to arbitraty destination. Usual for scams. May be justified by some complex mechanics (e.g. rebase, reflections). DYOR & manual audit are advised.


Combination 3: Reentrancy vulnerabilities + Unchecked transfer vulnerability. Usual for scams. May be justified by some complex mechanics (e.g. rebase, reflections). DYOR & manual audit are advised.


Contract ownership is not renounced (belongs to a wallet)

Reentrancy in PULIINU._transfer(address,address,uint256) (#1408-1486):
External calls:
- swapETHForTokens(buybackLimit.div(10)) (#1434)
- uniswapV2Router.swapExactETHForTokensSupportingFeeOnTransferTokens{value: amount}(0,path,address(0xdead),block.timestamp.add(300)) (#1544-1549)
- swapAndSendFee(forMarketing) (#1467)
- uniswapV2Router.swapExactTokensForETHSupportingFeeOnTransferTokens(tokenAmount,0,path,address(this),block.timestamp) (#1528-1534)
External calls sending eth:
- swapETHForTokens(buybackLimit.div(10)) (#1434)
- uniswapV2Router.swapExactETHForTokensSupportingFeeOnTransferTokens{value: amount}(0,path,address(0xdead),block.timestamp.add(300)) (#1544-1549)
- swapAndSendFee(forMarketing) (#1467)
- address(_marketingWallet).transfer(newBalance) (#1516)
State variables written after the call(s):
- swapAndSendFee(forMarketing) (#1467)
- _allowances[owner][spender] = amount (#1404)
Reentrancy in PULIINU._transfer(address,address,uint256) (#1408-1486):
External calls:
- swapETHForTokens(buybackLimit.div(10)) (#1434)
- uniswapV2Router.swapExactETHForTokensSupportingFeeOnTransferTokens{value: amount}(0,path,address(0xdead),block.timestamp.add(300)) (#1544-1549)
- swapAndSendFee(forMarketing) (#1467)
- uniswapV2Router.swapExactTokensForETHSupportingFeeOnTransferTokens(tokenAmount,0,path,address(this),block.timestamp) (#1528-1534)
- swapTokensForEth(forBuyBack) (#1470)
- uniswapV2Router.swapExactTokensForETHSupportingFeeOnTransferTokens(tokenAmount,0,path,address(this),block.timestamp) (#1528-1534)
External calls sending eth:
- swapETHForTokens(buybackLimit.div(10)) (#1434)
- uniswapV2Router.swapExactETHForTokensSupportingFeeOnTransferTokens{value: amount}(0,path,address(0xdead),block.timestamp.add(300)) (#1544-1549)
- swapAndSendFee(forMarketing) (#1467)
- address(_marketingWallet).transfer(newBalance) (#1516)
State variables written after the call(s):
- swapTokensForEth(forBuyBack) (#1470)
- _allowances[owner][spender] = amount (#1404)
Reentrancy in PULIINU._transfer(address,address,uint256) (#1408-1486):
External calls:
- swapETHForTokens(buybackLimit.div(10)) (#1434)
- uniswapV2Router.swapExactETHForTokensSupportingFeeOnTransferTokens{value: amount}(0,path,address(0xdead),block.timestamp.add(300)) (#1544-1549)
- swapAndSendFee(forMarketing) (#1467)
- uniswapV2Router.swapExactTokensForETHSupportingFeeOnTransferTokens(tokenAmount,0,path,address(this),block.timestamp) (#1528-1534)
- swapTokensForEth(forBuyBack) (#1470)
- uniswapV2Router.swapExactTokensForETHSupportingFeeOnTransferTokens(tokenAmount,0,path,address(this),block.timestamp) (#1528-1534)
- swapAndLiquify(contractTokenBalance - forMarketing - forBuyBack) (#1473)
- uniswapV2Router.addLiquidityETH{value: ethAmount}(address(this),tokenAmount,0,0,owner(),block.timestamp) (#1558-1565)
- uniswapV2Router.swapExactTokensForETHSupportingFeeOnTransferTokens(tokenAmount,0,path,address(this),block.timestamp) (#1528-1534)
External calls sending eth:
- swapETHForTokens(buybackLimit.div(10)) (#1434)
- uniswapV2Router.swapExactETHForTokensSupportingFeeOnTransferTokens{value: amount}(0,path,address(0xdead),block.timestamp.add(300)) (#1544-1549)
- swapAndSendFee(forMarketing) (#1467)
- address(_marketingWallet).transfer(newBalance) (#1516)
- swapAndLiquify(contractTokenBalance - forMarketing - forBuyBack) (#1473)
- uniswapV2Router.addLiquidityETH{value: ethAmount}(address(this),tokenAmount,0,0,owner(),block.timestamp) (#1558-1565)
State variables written after the call(s):
- swapAndLiquify(contractTokenBalance - forMarketing - forBuyBack) (#1473)
- _allowances[owner][spender] = amount (#1404)
- _tokenTransfer(from,to,amount,takeFee) (#1485)
- _buybackFee = sellFee.buybackFee (#1382)
- _buybackFee = buyFee.buybackFee (#1375)
- _buybackFee = 0 (#1368)
- _tokenTransfer(from,to,amount,takeFee) (#1485)
- _liquidityFee = 30 (#1388)
- _liquidityFee = buyFee.liquidityFee (#1374)
- _liquidityFee = 0 (#1367)
- _liquidityFee = sellFee.liquidityFee (#1381)
- _tokenTransfer(from,to,amount,takeFee) (#1485)
- _marketingFee = 30 (#1389)
- _marketingFee = 0 (#1369)
- _marketingFee = sellFee.marketingFee (#1383)
- _marketingFee = buyFee.marketingFee (#1376)
- _tokenTransfer(from,to,amount,takeFee) (#1485)
- _tFeeTotal = _tFeeTotal.add(tFee) (#1209)
- _tokenTransfer(from,to,amount,takeFee) (#1485)
- _taxFee = sellFee.taxFee (#1380)
- _taxFee = buyFee.taxFee (#1373)
- _taxFee = 30 (#1387)
- _taxFee = 0 (#1366)
Reentrancy in PULIINU.constructor(uint16,uint16,uint16,uint16,uint16,address,uint256,uint256,uint256,uint256,uint256) (#888-939):
External calls:
- uniswapV2Pair = IUniswapV2Factory(_uniswapV2Router.factory()).createPair(address(this),_uniswapV2Router.WETH()) (#926-927)
State variables written after the call(s):
- _isExcludedFromFee[owner()] = true (#935)
- _isExcludedFromFee[address(this)] = true (#936)
- _marketingWallet = _marketing (#932)
- uniswapV2Router = _uniswapV2Router (#930)
Reentrancy in PULIINU.swapAndLiquify(uint256) (#1488-1509):
External calls:
- swapTokensForEth(half) (#1500)
- uniswapV2Router.swapExactTokensForETHSupportingFeeOnTransferTokens(tokenAmount,0,path,address(this),block.timestamp) (#1528-1534)
- addLiquidity(otherHalf,newBalance) (#1506)
- uniswapV2Router.addLiquidityETH{value: ethAmount}(address(this),tokenAmount,0,0,owner(),block.timestamp) (#1558-1565)
External calls sending eth:
- addLiquidity(otherHalf,newBalance) (#1506)
- uniswapV2Router.addLiquidityETH{value: ethAmount}(address(this),tokenAmount,0,0,owner(),block.timestamp) (#1558-1565)
State variables written after the call(s):
- addLiquidity(otherHalf,newBalance) (#1506)
- _allowances[owner][spender] = amount (#1404)
- addLiquidity(otherHalf,newBalance) (#1506)
- inSwapAndLiquify = true (#883)
- inSwapAndLiquify = false (#885)
Reentrancy in PULIINU.transferFrom(address,address,uint256) (#989-1004):
External calls:
- _transfer(sender,recipient,amount) (#994)
- uniswapV2Router.addLiquidityETH{value: ethAmount}(address(this),tokenAmount,0,0,owner(),block.timestamp) (#1558-1565)
- uniswapV2Router.swapExactETHForTokensSupportingFeeOnTransferTokens{value: amount}(0,path,address(0xdead),block.timestamp.add(300)) (#1544-1549)
- uniswapV2Router.swapExactTokensForETHSupportingFeeOnTransferTokens(tokenAmount,0,path,address(this),block.timestamp) (#1528-1534)
External calls sending eth:
- _transfer(sender,recipient,amount) (#994)
- uniswapV2Router.addLiquidityETH{value: ethAmount}(address(this),tokenAmount,0,0,owner(),block.timestamp) (#1558-1565)
- uniswapV2Router.swapExactETHForTokensSupportingFeeOnTransferTokens{value: amount}(0,path,address(0xdead),block.timestamp.add(300)) (#1544-1549)
- address(_marketingWallet).transfer(newBalance) (#1516)
State variables written after the call(s):
- _approve(sender,_msgSender(),_allowances[sender][_msgSender()].sub(amount,ERC20: transfer amount exceeds allowance)) (#995-1002)
- _allowances[owner][spender] = amount (#1404)
Reentrancy in PULIINU.updateRouter(address) (#1155-1164):
External calls:
- _uniswapV2Pair = IUniswapV2Factory(uniswapV2Router.factory()).createPair(address(this),uniswapV2Router.WETH()) (#1161-1162)
State variables written after the call(s):
- uniswapV2Pair = _uniswapV2Pair (#1163)
Apply the check-effects-interactions pattern.

Additional information: link

PULIINU.addLiquidity(uint256,uint256) (#1553-1566) ignores return value by uniswapV2Router.addLiquidityETH{value: ethAmount}(address(this),tokenAmount,0,0,owner(),block.timestamp) (#1558-1565)
Ensure that all the return values of the function calls are used.

Additional information: link

PULIINU.allowance(address,address).owner (#971) shadows:
- Ownable.owner() (#233-235) (function)
PULIINU._approve(address,address,uint256).owner (#1397) shadows:
- Ownable.owner() (#233-235) (function)
Rename the local variables that shadow another component.

Additional information: link

PULIINU.controlBuyBack(bool,uint256) (#1129-1132) should emit an event for:
- buybackLimit = amount (#1131)
PULIINU.setNumTokensSellToAddToLiquidity(uint256) (#1148-1153) should emit an event for:
- numTokensSellToAddToLiquidity = numTokens * 10 ** _decimals (#1152)
PULIINU.setMaxBuyAmount(uint256) (#1166-1168) should emit an event for:
- maxBuyAmount = value * 10 ** _decimals (#1167)
PULIINU.setMaxSellAmount(uint256) (#1170-1172) should emit an event for:
- maxSellAmount = value * 10 ** _decimals (#1171)
PULIINU.setMaxWallet(uint256) (#1174-1176) should emit an event for:
- maxWalletAmount = value * 10 ** _decimals (#1175)
Emit an event for critical parameter changes.

Additional information: link

PULIINU.constructor(uint16,uint16,uint16,uint16,uint16,address,uint256,uint256,uint256,uint256,uint256)._marketing (#893) lacks a zero-check on :
- _marketingWallet = _marketing (#932)
PULIINU.updateRouter(address)._uniswapV2Pair (#1161-1162) lacks a zero-check on :
- uniswapV2Pair = _uniswapV2Pair (#1163)
Check that the address is not zero.

Additional information: link

renounceOwnership() should be declared external:
- Ownable.renounceOwnership() (#252-254)
transferOwnership(address) should be declared external:
- Ownable.transferOwnership(address) (#260-263)
name() should be declared external:
- PULIINU.name() (#941-943)
symbol() should be declared external:
- PULIINU.symbol() (#945-947)
decimals() should be declared external:
- PULIINU.decimals() (#949-951)
totalSupply() should be declared external:
- PULIINU.totalSupply() (#953-955)
transfer(address,uint256) should be declared external:
- PULIINU.transfer(address,uint256) (#962-969)
allowance(address,address) should be declared external:
- PULIINU.allowance(address,address) (#971-978)
approve(address,uint256) should be declared external:
- PULIINU.approve(address,uint256) (#980-987)
transferFrom(address,address,uint256) should be declared external:
- PULIINU.transferFrom(address,address,uint256) (#989-1004)
increaseAllowance(address,uint256) should be declared external:
- PULIINU.increaseAllowance(address,uint256) (#1006-1017)
decreaseAllowance(address,uint256) should be declared external:
- PULIINU.decreaseAllowance(address,uint256) (#1019-1033)
isExcludedFromReward(address) should be declared external:
- PULIINU.isExcludedFromReward(address) (#1035-1037)
totalFees() should be declared external:
- PULIINU.totalFees() (#1039-1041)
checkBlock() should be declared external:
- PULIINU.checkBlock() (#1043-1045)
deliver(uint256) should be declared external:
- PULIINU.deliver(uint256) (#1047-1057)
reflectionFromToken(uint256,bool) should be declared external:
- PULIINU.reflectionFromToken(uint256,bool) (#1059-1072)
excludeFromReward(address) should be declared external:
- PULIINU.excludeFromReward(address) (#1087-1095)
setSwapAndLiquifyEnabled(bool) should be declared external:
- PULIINU.setSwapAndLiquifyEnabled(bool) (#1182-1185)
isExcludedFromFee(address) should be declared external:
- PULIINU.isExcludedFromFee(address) (#1392-1394)
Use the external attribute for functions never called from the contract.

Additional information: link

Reentrancy in PULIINU._transfer(address,address,uint256) (#1408-1486):
External calls:
- swapETHForTokens(buybackLimit.div(10)) (#1434)
- uniswapV2Router.swapExactETHForTokensSupportingFeeOnTransferTokens{value: amount}(0,path,address(0xdead),block.timestamp.add(300)) (#1544-1549)
- swapAndSendFee(forMarketing) (#1467)
- uniswapV2Router.swapExactTokensForETHSupportingFeeOnTransferTokens(tokenAmount,0,path,address(this),block.timestamp) (#1528-1534)
External calls sending eth:
- swapETHForTokens(buybackLimit.div(10)) (#1434)
- uniswapV2Router.swapExactETHForTokensSupportingFeeOnTransferTokens{value: amount}(0,path,address(0xdead),block.timestamp.add(300)) (#1544-1549)
- swapAndSendFee(forMarketing) (#1467)
- address(_marketingWallet).transfer(newBalance) (#1516)
Event emitted after the call(s):
- Approval(owner,spender,amount) (#1405)
- swapAndSendFee(forMarketing) (#1467)
Reentrancy in PULIINU._transfer(address,address,uint256) (#1408-1486):
External calls:
- swapETHForTokens(buybackLimit.div(10)) (#1434)
- uniswapV2Router.swapExactETHForTokensSupportingFeeOnTransferTokens{value: amount}(0,path,address(0xdead),block.timestamp.add(300)) (#1544-1549)
- swapAndSendFee(forMarketing) (#1467)
- uniswapV2Router.swapExactTokensForETHSupportingFeeOnTransferTokens(tokenAmount,0,path,address(this),block.timestamp) (#1528-1534)
- swapTokensForEth(forBuyBack) (#1470)
- uniswapV2Router.swapExactTokensForETHSupportingFeeOnTransferTokens(tokenAmount,0,path,address(this),block.timestamp) (#1528-1534)
External calls sending eth:
- swapETHForTokens(buybackLimit.div(10)) (#1434)
- uniswapV2Router.swapExactETHForTokensSupportingFeeOnTransferTokens{value: amount}(0,path,address(0xdead),block.timestamp.add(300)) (#1544-1549)
- swapAndSendFee(forMarketing) (#1467)
- address(_marketingWallet).transfer(newBalance) (#1516)
Event emitted after the call(s):
- Approval(owner,spender,amount) (#1405)
- swapTokensForEth(forBuyBack) (#1470)
Reentrancy in PULIINU._transfer(address,address,uint256) (#1408-1486):
External calls:
- swapETHForTokens(buybackLimit.div(10)) (#1434)
- uniswapV2Router.swapExactETHForTokensSupportingFeeOnTransferTokens{value: amount}(0,path,address(0xdead),block.timestamp.add(300)) (#1544-1549)
- swapAndSendFee(forMarketing) (#1467)
- uniswapV2Router.swapExactTokensForETHSupportingFeeOnTransferTokens(tokenAmount,0,path,address(this),block.timestamp) (#1528-1534)
- swapTokensForEth(forBuyBack) (#1470)
- uniswapV2Router.swapExactTokensForETHSupportingFeeOnTransferTokens(tokenAmount,0,path,address(this),block.timestamp) (#1528-1534)
- swapAndLiquify(contractTokenBalance - forMarketing - forBuyBack) (#1473)
- uniswapV2Router.addLiquidityETH{value: ethAmount}(address(this),tokenAmount,0,0,owner(),block.timestamp) (#1558-1565)
- uniswapV2Router.swapExactTokensForETHSupportingFeeOnTransferTokens(tokenAmount,0,path,address(this),block.timestamp) (#1528-1534)
External calls sending eth:
- swapETHForTokens(buybackLimit.div(10)) (#1434)
- uniswapV2Router.swapExactETHForTokensSupportingFeeOnTransferTokens{value: amount}(0,path,address(0xdead),block.timestamp.add(300)) (#1544-1549)
- swapAndSendFee(forMarketing) (#1467)
- address(_marketingWallet).transfer(newBalance) (#1516)
- swapAndLiquify(contractTokenBalance - forMarketing - forBuyBack) (#1473)
- uniswapV2Router.addLiquidityETH{value: ethAmount}(address(this),tokenAmount,0,0,owner(),block.timestamp) (#1558-1565)
Event emitted after the call(s):
- Approval(owner,spender,amount) (#1405)
- swapAndLiquify(contractTokenBalance - forMarketing - forBuyBack) (#1473)
- SwapAndLiquify(half,newBalance,otherHalf) (#1508)
- swapAndLiquify(contractTokenBalance - forMarketing - forBuyBack) (#1473)
- Transfer(sender,recipient,tTransferAmount) (#1635)
- _tokenTransfer(from,to,amount,takeFee) (#1485)
- Transfer(sender,recipient,tTransferAmount) (#1660)
- _tokenTransfer(from,to,amount,takeFee) (#1485)
- Transfer(sender,recipient,tTransferAmount) (#1685)
- _tokenTransfer(from,to,amount,takeFee) (#1485)
- Transfer(sender,recipient,tTransferAmount) (#1711)
- _tokenTransfer(from,to,amount,takeFee) (#1485)
Reentrancy in PULIINU.constructor(uint16,uint16,uint16,uint16,uint16,address,uint256,uint256,uint256,uint256,uint256) (#888-939):
External calls:
- uniswapV2Pair = IUniswapV2Factory(_uniswapV2Router.factory()).createPair(address(this),_uniswapV2Router.WETH()) (#926-927)
Event emitted after the call(s):
- Transfer(address(0),_msgSender(),_tTotal) (#938)
Reentrancy in PULIINU.swapAndLiquify(uint256) (#1488-1509):
External calls:
- swapTokensForEth(half) (#1500)
- uniswapV2Router.swapExactTokensForETHSupportingFeeOnTransferTokens(tokenAmount,0,path,address(this),block.timestamp) (#1528-1534)
- addLiquidity(otherHalf,newBalance) (#1506)
- uniswapV2Router.addLiquidityETH{value: ethAmount}(address(this),tokenAmount,0,0,owner(),block.timestamp) (#1558-1565)
External calls sending eth:
- addLiquidity(otherHalf,newBalance) (#1506)
- uniswapV2Router.addLiquidityETH{value: ethAmount}(address(this),tokenAmount,0,0,owner(),block.timestamp) (#1558-1565)
Event emitted after the call(s):
- Approval(owner,spender,amount) (#1405)
- addLiquidity(otherHalf,newBalance) (#1506)
- SwapAndLiquify(half,newBalance,otherHalf) (#1508)
Reentrancy in PULIINU.transferFrom(address,address,uint256) (#989-1004):
External calls:
- _transfer(sender,recipient,amount) (#994)
- uniswapV2Router.addLiquidityETH{value: ethAmount}(address(this),tokenAmount,0,0,owner(),block.timestamp) (#1558-1565)
- uniswapV2Router.swapExactETHForTokensSupportingFeeOnTransferTokens{value: amount}(0,path,address(0xdead),block.timestamp.add(300)) (#1544-1549)
- uniswapV2Router.swapExactTokensForETHSupportingFeeOnTransferTokens(tokenAmount,0,path,address(this),block.timestamp) (#1528-1534)
External calls sending eth:
- _transfer(sender,recipient,amount) (#994)
- uniswapV2Router.addLiquidityETH{value: ethAmount}(address(this),tokenAmount,0,0,owner(),block.timestamp) (#1558-1565)
- uniswapV2Router.swapExactETHForTokensSupportingFeeOnTransferTokens{value: amount}(0,path,address(0xdead),block.timestamp.add(300)) (#1544-1549)
- address(_marketingWallet).transfer(newBalance) (#1516)
Event emitted after the call(s):
- Approval(owner,spender,amount) (#1405)
- _approve(sender,_msgSender(),_allowances[sender][_msgSender()].sub(amount,ERC20: transfer amount exceeds allowance)) (#995-1002)
Apply the check-effects-interactions pattern.

Additional information: link

Address.isContract(address) (#300-310) uses assembly
- INLINE ASM (#306-308)
Address.verifyCallResult(bool,bytes,string) (#469-489) uses assembly
- INLINE ASM (#481-484)
Do not use evm assembly.

Additional information: link

Different versions of Solidity is used:
- Version used: ['>=0.5.0', '>=0.6.2', '^0.8.0', '^0.8.10']
- >=0.6.2 (#11)
- >=0.6.2 (#109)
- >=0.5.0 (#155)
- ^0.8.0 (#177)
- ^0.8.0 (#203)
- ^0.8.0 (#277)
- ^0.8.0 (#496)
- ^0.8.0 (#725)
- ^0.8.10 (#806)
Use one Solidity version.

Additional information: link

PULIINU.includeInReward(address) (#1097-1108) has costly operations inside a loop:
- _excluded.pop() (#1104)
Use a local variable to hold the loop computation result.

Additional information: link

Address.functionCall(address,bytes) (#353-355) is never used and should be removed
Address.functionCall(address,bytes,string) (#363-369) is never used and should be removed
Address.functionCallWithValue(address,bytes,uint256) (#382-388) is never used and should be removed
Address.functionCallWithValue(address,bytes,uint256,string) (#396-407) is never used and should be removed
Address.functionDelegateCall(address,bytes) (#442-444) is never used and should be removed
Address.functionDelegateCall(address,bytes,string) (#452-461) is never used and should be removed
Address.functionStaticCall(address,bytes) (#415-417) is never used and should be removed
Address.functionStaticCall(address,bytes,string) (#425-434) is never used and should be removed
Address.isContract(address) (#300-310) is never used and should be removed
Address.sendValue(address,uint256) (#328-333) is never used and should be removed
Address.verifyCallResult(bool,bytes,string) (#469-489) is never used and should be removed
Context._msgData() (#194-196) is never used and should be removed
SafeMath.div(uint256,uint256,string) (#683-692) is never used and should be removed
SafeMath.mod(uint256,uint256) (#643-645) is never used and should be removed
SafeMath.mod(uint256,uint256,string) (#709-718) is never used and should be removed
SafeMath.tryAdd(uint256,uint256) (#514-520) is never used and should be removed
SafeMath.tryDiv(uint256,uint256) (#556-561) is never used and should be removed
SafeMath.tryMod(uint256,uint256) (#568-573) is never used and should be removed
SafeMath.tryMul(uint256,uint256) (#539-549) is never used and should be removed
SafeMath.trySub(uint256,uint256) (#527-532) is never used and should be removed
Remove unused functions.

Additional information: link

Pragma version>=0.6.2 (#11) allows old versions
Pragma version>=0.6.2 (#109) allows old versions
Pragma version>=0.5.0 (#155) allows old versions
Pragma version^0.8.0 (#177) allows old versions
Pragma version^0.8.0 (#203) allows old versions
Pragma version^0.8.0 (#277) allows old versions
Pragma version^0.8.0 (#496) allows old versions
Pragma version^0.8.0 (#725) allows old versions
Pragma version^0.8.10 (#806) necessitates a version too recent to be trusted. Consider deploying with 0.6.12/0.7.6/0.8.7
solc-0.8.10 is not recommended for deployment
Deploy with any of the following Solidity versions: 0.5.16 - 0.5.17, 0.6.11 - 0.6.12, 0.7.5 - 0.7.6 Use a simple pragma version that allows any of these versions. Consider using the latest version of Solidity for testing.

Additional information: link

Low level call in Address.sendValue(address,uint256) (#328-333):
- (success) = recipient.call{value: amount}() (#331)
Low level call in Address.functionCallWithValue(address,bytes,uint256,string) (#396-407):
- (success,returndata) = target.call{value: value}(data) (#405)
Low level call in Address.functionStaticCall(address,bytes,string) (#425-434):
- (success,returndata) = target.staticcall(data) (#432)
Low level call in Address.functionDelegateCall(address,bytes,string) (#452-461):
- (success,returndata) = target.delegatecall(data) (#459)
Avoid low-level calls. Check the call success. If the call is meant for a contract, check for code existence

Additional information: link

Function IUniswapV2Router01.WETH() (#15) is not in mixedCase
Parameter PULIINU.setSwapAndLiquifyEnabled(bool)._enabled (#1182) is not in mixedCase
Parameter PULIINU.claimStuckTokens(address)._token (#1191) is not in mixedCase
Parameter PULIINU.calculateTaxFee(uint256)._amount (#1337) is not in mixedCase
Parameter PULIINU.calculateLiquidityFee(uint256)._amount (#1341) is not in mixedCase
Parameter PULIINU.calculatebuybackFee(uint256)._amount (#1349) is not in mixedCase
Parameter PULIINU.calculateMarketingFee(uint256)._amount (#1357) is not in mixedCase
Variable PULIINU._isBlackListed (#820) is not in mixedCase
Variable PULIINU._marketingWallet (#861) is not in mixedCase
Follow the Solidity naming convention.

Additional information: link

Reentrancy in PULIINU._transfer(address,address,uint256) (#1408-1486):
External calls:
- swapAndSendFee(forMarketing) (#1467)
- address(_marketingWallet).transfer(newBalance) (#1516)
External calls sending eth:
- swapETHForTokens(buybackLimit.div(10)) (#1434)
- uniswapV2Router.swapExactETHForTokensSupportingFeeOnTransferTokens{value: amount}(0,path,address(0xdead),block.timestamp.add(300)) (#1544-1549)
- swapAndSendFee(forMarketing) (#1467)
- address(_marketingWallet).transfer(newBalance) (#1516)
State variables written after the call(s):
- swapTokensForEth(forBuyBack) (#1470)
- _allowances[owner][spender] = amount (#1404)
- swapTokensForEth(forBuyBack) (#1470)
- inSwapAndLiquify = true (#883)
- inSwapAndLiquify = false (#885)
Event emitted after the call(s):
- Approval(owner,spender,amount) (#1405)
- swapTokensForEth(forBuyBack) (#1470)
Reentrancy in PULIINU._transfer(address,address,uint256) (#1408-1486):
External calls:
- swapAndSendFee(forMarketing) (#1467)
- address(_marketingWallet).transfer(newBalance) (#1516)
External calls sending eth:
- swapETHForTokens(buybackLimit.div(10)) (#1434)
- uniswapV2Router.swapExactETHForTokensSupportingFeeOnTransferTokens{value: amount}(0,path,address(0xdead),block.timestamp.add(300)) (#1544-1549)
- swapAndSendFee(forMarketing) (#1467)
- address(_marketingWallet).transfer(newBalance) (#1516)
- swapAndLiquify(contractTokenBalance - forMarketing - forBuyBack) (#1473)
- uniswapV2Router.addLiquidityETH{value: ethAmount}(address(this),tokenAmount,0,0,owner(),block.timestamp) (#1558-1565)
State variables written after the call(s):
- swapAndLiquify(contractTokenBalance - forMarketing - forBuyBack) (#1473)
- _allowances[owner][spender] = amount (#1404)
- _tokenTransfer(from,to,amount,takeFee) (#1485)
- _buybackFee = sellFee.buybackFee (#1382)
- _buybackFee = buyFee.buybackFee (#1375)
- _buybackFee = 0 (#1368)
- _tokenTransfer(from,to,amount,takeFee) (#1485)
- _liquidityFee = 30 (#1388)
- _liquidityFee = buyFee.liquidityFee (#1374)
- _liquidityFee = 0 (#1367)
- _liquidityFee = sellFee.liquidityFee (#1381)
- _tokenTransfer(from,to,amount,takeFee) (#1485)
- _marketingFee = 30 (#1389)
- _marketingFee = 0 (#1369)
- _marketingFee = sellFee.marketingFee (#1383)
- _marketingFee = buyFee.marketingFee (#1376)
- _tokenTransfer(from,to,amount,takeFee) (#1485)
- _rOwned[address(this)] = _rOwned[address(this)].add(rLiquidity) (#1321)
- _rOwned[address(this)] = _rOwned[address(this)].add(rMarketing).add(rBuyBack) (#1333)
- _rOwned[sender] = _rOwned[sender].sub(rAmount) (#1651)
- _rOwned[sender] = _rOwned[sender].sub(rAmount) (#1627)
- _rOwned[sender] = _rOwned[sender].sub(rAmount) (#1702)
- _rOwned[sender] = _rOwned[sender].sub(rAmount) (#1677)
- _rOwned[recipient] = _rOwned[recipient].add(rTransferAmount) (#1628)
- _rOwned[recipient] = _rOwned[recipient].add(rTransferAmount) (#1678)
- _rOwned[recipient] = _rOwned[recipient].add(rTransferAmount) (#1653)
- _rOwned[recipient] = _rOwned[recipient].add(rTransferAmount) (#1704)
- _tokenTransfer(from,to,amount,takeFee) (#1485)
- _rTotal = _rTotal.sub(rFee) (#1208)
- _tokenTransfer(from,to,amount,takeFee) (#1485)
- _tFeeTotal = _tFeeTotal.add(tFee) (#1209)
- _tokenTransfer(from,to,amount,takeFee) (#1485)
- _tOwned[address(this)] = _tOwned[address(this)].add(tMarketing).add(tBuyBack) (#1334)
- _tOwned[address(this)] = _tOwned[address(this)].add(tLiquidity) (#1323)
- _tOwned[sender] = _tOwned[sender].sub(tAmount) (#1701)
- _tOwned[sender] = _tOwned[sender].sub(tAmount) (#1676)
- _tOwned[recipient] = _tOwned[recipient].add(tTransferAmount) (#1652)
- _tOwned[recipient] = _tOwned[recipient].add(tTransferAmount) (#1703)
- _tokenTransfer(from,to,amount,takeFee) (#1485)
- _taxFee = sellFee.taxFee (#1380)
- _taxFee = buyFee.taxFee (#1373)
- _taxFee = 30 (#1387)
- _taxFee = 0 (#1366)
- swapAndLiquify(contractTokenBalance - forMarketing - forBuyBack) (#1473)
- inSwapAndLiquify = true (#883)
- inSwapAndLiquify = false (#885)
Event emitted after the call(s):
- Approval(owner,spender,amount) (#1405)
- swapAndLiquify(contractTokenBalance - forMarketing - forBuyBack) (#1473)
- SwapAndLiquify(half,newBalance,otherHalf) (#1508)
- swapAndLiquify(contractTokenBalance - forMarketing - forBuyBack) (#1473)
- Transfer(sender,recipient,tTransferAmount) (#1635)
- _tokenTransfer(from,to,amount,takeFee) (#1485)
- Transfer(sender,recipient,tTransferAmount) (#1685)
- _tokenTransfer(from,to,amount,takeFee) (#1485)
- Transfer(sender,recipient,tTransferAmount) (#1660)
- _tokenTransfer(from,to,amount,takeFee) (#1485)
- Transfer(sender,recipient,tTransferAmount) (#1711)
- _tokenTransfer(from,to,amount,takeFee) (#1485)
Reentrancy in PULIINU.transferFrom(address,address,uint256) (#989-1004):
External calls:
- _transfer(sender,recipient,amount) (#994)
- address(_marketingWallet).transfer(newBalance) (#1516)
External calls sending eth:
- _transfer(sender,recipient,amount) (#994)
- uniswapV2Router.addLiquidityETH{value: ethAmount}(address(this),tokenAmount,0,0,owner(),block.timestamp) (#1558-1565)
- uniswapV2Router.swapExactETHForTokensSupportingFeeOnTransferTokens{value: amount}(0,path,address(0xdead),block.timestamp.add(300)) (#1544-1549)
- address(_marketingWallet).transfer(newBalance) (#1516)
State variables written after the call(s):
- _approve(sender,_msgSender(),_allowances[sender][_msgSender()].sub(amount,ERC20: transfer amount exceeds allowance)) (#995-1002)
- _allowances[owner][spender] = amount (#1404)
Event emitted after the call(s):
- Approval(owner,spender,amount) (#1405)
- _approve(sender,_msgSender(),_allowances[sender][_msgSender()].sub(amount,ERC20: transfer amount exceeds allowance)) (#995-1002)
Apply the check-effects-interactions pattern.

Additional information: link

Variable IUniswapV2Router01.addLiquidity(address,address,uint256,uint256,uint256,uint256,address,uint256).amountADesired (#20) is too similar to IUniswapV2Router01.addLiquidity(address,address,uint256,uint256,uint256,uint256,address,uint256).amountBDesired (#21)
Variable PULIINU._getValues(uint256).rTransferAmount (#1231) is too similar to PULIINU._transferFromExcluded(address,address,uint256).tTransferAmount (#1672)
Variable PULIINU._getRValues(uint256,uint256,uint256,uint256,uint256,uint256).rTransferAmount (#1290-1294) is too similar to PULIINU._transferStandard(address,address,uint256).tTransferAmount (#1623)
Variable PULIINU._getValues(uint256).rTransferAmount (#1231) is too similar to PULIINU._transferStandard(address,address,uint256).tTransferAmount (#1623)
Variable PULIINU._getValues(uint256).rTransferAmount (#1231) is too similar to PULIINU._getTValues(uint256).tTransferAmount (#1264)
Variable PULIINU._getValues(uint256).rTransferAmount (#1231) is too similar to PULIINU._getValues(uint256).tTransferAmount (#1225)
Variable PULIINU._transferStandard(address,address,uint256).rTransferAmount (#1621) is too similar to PULIINU._transferBothExcluded(address,address,uint256).tTransferAmount (#1697)
Variable PULIINU._transferFromExcluded(address,address,uint256).rTransferAmount (#1670) is too similar to PULIINU._transferToExcluded(address,address,uint256).tTransferAmount (#1647)
Variable PULIINU._transferStandard(address,address,uint256).rTransferAmount (#1621) is too similar to PULIINU._transferFromExcluded(address,address,uint256).tTransferAmount (#1672)
Variable PULIINU._transferFromExcluded(address,address,uint256).rTransferAmount (#1670) is too similar to PULIINU._transferBothExcluded(address,address,uint256).tTransferAmount (#1697)
Variable PULIINU._transferStandard(address,address,uint256).rTransferAmount (#1621) is too similar to PULIINU._transferStandard(address,address,uint256).tTransferAmount (#1623)
Variable PULIINU._transferStandard(address,address,uint256).rTransferAmount (#1621) is too similar to PULIINU._getTValues(uint256).tTransferAmount (#1264)
Variable PULIINU._transferFromExcluded(address,address,uint256).rTransferAmount (#1670) is too similar to PULIINU._transferFromExcluded(address,address,uint256).tTransferAmount (#1672)
Variable PULIINU._transferFromExcluded(address,address,uint256).rTransferAmount (#1670) is too similar to PULIINU._getTValues(uint256).tTransferAmount (#1264)
Variable PULIINU._transferFromExcluded(address,address,uint256).rTransferAmount (#1670) is too similar to PULIINU._transferStandard(address,address,uint256).tTransferAmount (#1623)
Variable PULIINU._transferBothExcluded(address,address,uint256).rTransferAmount (#1695) is too similar to PULIINU._transferBothExcluded(address,address,uint256).tTransferAmount (#1697)
Variable PULIINU._transferBothExcluded(address,address,uint256).rTransferAmount (#1695) is too similar to PULIINU._transferFromExcluded(address,address,uint256).tTransferAmount (#1672)
Variable PULIINU._transferBothExcluded(address,address,uint256).rTransferAmount (#1695) is too similar to PULIINU._getTValues(uint256).tTransferAmount (#1264)
Variable PULIINU._transferBothExcluded(address,address,uint256).rTransferAmount (#1695) is too similar to PULIINU._transferStandard(address,address,uint256).tTransferAmount (#1623)
Variable PULIINU._getRValues(uint256,uint256,uint256,uint256,uint256,uint256).rTransferAmount (#1290-1294) is too similar to PULIINU._transferToExcluded(address,address,uint256).tTransferAmount (#1647)
Variable PULIINU._getRValues(uint256,uint256,uint256,uint256,uint256,uint256).rTransferAmount (#1290-1294) is too similar to PULIINU._transferBothExcluded(address,address,uint256).tTransferAmount (#1697)
Variable PULIINU._getValues(uint256).rTransferAmount (#1231) is too similar to PULIINU._transferToExcluded(address,address,uint256).tTransferAmount (#1647)
Variable PULIINU._getValues(uint256).rTransferAmount (#1231) is too similar to PULIINU._transferBothExcluded(address,address,uint256).tTransferAmount (#1697)
Variable PULIINU._getRValues(uint256,uint256,uint256,uint256,uint256,uint256).rTransferAmount (#1290-1294) is too similar to PULIINU._getTValues(uint256).tTransferAmount (#1264)
Variable PULIINU._getRValues(uint256,uint256,uint256,uint256,uint256,uint256).rTransferAmount (#1290-1294) is too similar to PULIINU._transferFromExcluded(address,address,uint256).tTransferAmount (#1672)
Variable PULIINU.reflectionFromToken(uint256,bool).rTransferAmount (#1069) is too similar to PULIINU._getTValues(uint256).tTransferAmount (#1264)
Variable PULIINU._getRValues(uint256,uint256,uint256,uint256,uint256,uint256).rTransferAmount (#1290-1294) is too similar to PULIINU._getValues(uint256).tTransferAmount (#1225)
Variable PULIINU._transferBothExcluded(address,address,uint256).rTransferAmount (#1695) is too similar to PULIINU._transferToExcluded(address,address,uint256).tTransferAmount (#1647)
Variable PULIINU._transferToExcluded(address,address,uint256).rTransferAmount (#1645) is too similar to PULIINU._transferToExcluded(address,address,uint256).tTransferAmount (#1647)
Variable PULIINU._transferStandard(address,address,uint256).rTransferAmount (#1621) is too similar to PULIINU._transferToExcluded(address,address,uint256).tTransferAmount (#1647)
Variable PULIINU._transferToExcluded(address,address,uint256).rTransferAmount (#1645) is too similar to PULIINU._getTValues(uint256).tTransferAmount (#1264)
Variable PULIINU.reflectionFromToken(uint256,bool).rTransferAmount (#1069) is too similar to PULIINU._transferStandard(address,address,uint256).tTransferAmount (#1623)
Variable PULIINU.reflectionFromToken(uint256,bool).rTransferAmount (#1069) is too similar to PULIINU._transferFromExcluded(address,address,uint256).tTransferAmount (#1672)
Variable PULIINU.reflectionFromToken(uint256,bool).rTransferAmount (#1069) is too similar to PULIINU._transferBothExcluded(address,address,uint256).tTransferAmount (#1697)
Variable PULIINU.reflectionFromToken(uint256,bool).rTransferAmount (#1069) is too similar to PULIINU._getValues(uint256).tTransferAmount (#1225)
Variable PULIINU.reflectionFromToken(uint256,bool).rTransferAmount (#1069) is too similar to PULIINU._transferToExcluded(address,address,uint256).tTransferAmount (#1647)
Variable PULIINU._transferToExcluded(address,address,uint256).rTransferAmount (#1645) is too similar to PULIINU._transferStandard(address,address,uint256).tTransferAmount (#1623)
Variable PULIINU._transferBothExcluded(address,address,uint256).rTransferAmount (#1695) is too similar to PULIINU._getValues(uint256).tTransferAmount (#1225)
Variable PULIINU._transferToExcluded(address,address,uint256).rTransferAmount (#1645) is too similar to PULIINU._transferFromExcluded(address,address,uint256).tTransferAmount (#1672)
Variable PULIINU._transferToExcluded(address,address,uint256).rTransferAmount (#1645) is too similar to PULIINU._transferBothExcluded(address,address,uint256).tTransferAmount (#1697)
Variable PULIINU._transferFromExcluded(address,address,uint256).rTransferAmount (#1670) is too similar to PULIINU._getValues(uint256).tTransferAmount (#1225)
Variable PULIINU._transferToExcluded(address,address,uint256).rTransferAmount (#1645) is too similar to PULIINU._getValues(uint256).tTransferAmount (#1225)
Variable PULIINU._transferStandard(address,address,uint256).rTransferAmount (#1621) is too similar to PULIINU._getValues(uint256).tTransferAmount (#1225)
Prevent variables from having similar names.

Additional information: link

PULIINU._decimals (#830) should be constant
PULIINU._name (#828) should be constant
PULIINU._symbol (#829) should be constant
Add the constant attributes to state variables that never change.

Additional information: link

Holders:


Swap operations require suspiciously high gas. Contract logic is complex and may disguise some form of scam.


Token is deployed only at one blockchain

Contract has 10% buy tax and 10% sell tax.
Taxes are low but contract ownership is not renounced. Token has a high risk of becoming a honeypot.

No disclosed threats


Unable to find audit link on the website


Unable to find whitepaper link on the website


Unable to find Telegram link on the website


Young tokens have high risks of price dump / death


Young tokens have high risks of scam / price dump / death


Young tokens have high risks of scam / price dump / death


Young tokens have high risks of scam / price dump / death


Alexa traffic rank is relatively low

Additional information: link


Young tokens have high risks of price dump / death

Price for PULI

News for PULI