Police Crypto Token Logo

PoliceCrypto [Police Crypto] Token

About PoliceCrypto

Listings

Not Found
Token 9 months
white paper

Police Crypto is an audit agency platform for Crypto tokens and token verification platforms that are problematic and eligible for trading. Police Crypto was created because of the many frauds in various ways so that potential holders were deceived through token sales. Many Prospective Holders are deceived by buying a token but the token cannot be sold. And we are here to choose for you which tokens are worth buying and which are not worth buying.

Social

Laser Scorebeta Last Audit: 14 May 2022

report
Code:

Third Party Audit: untrusted audit

CoinToken.addLiquidity(uint256,uint256) (#837-847) sends eth to arbitrary user
Dangerous calls:
- uniswapV2Router.addLiquidityETH{value: ethAmount}(address(this),tokenAmount,0,0,owner(),block.timestamp) (#839-846)
Ensure that an arbitrary user cannot withdraw unauthorized funds.

Additional information: link

Reentrancy in CoinToken._transfer(address,address,uint256) (#776-811):
External calls:
- swapAndLiquify(contractTokenBalance) (#802)
- uniswapV2Router.addLiquidityETH{value: ethAmount}(address(this),tokenAmount,0,0,owner(),block.timestamp) (#839-846)
- uniswapV2Router.swapExactTokensForETHSupportingFeeOnTransferTokens(tokenAmount,0,path,address(this),block.timestamp) (#828-834)
External calls sending eth:
- swapAndLiquify(contractTokenBalance) (#802)
- uniswapV2Router.addLiquidityETH{value: ethAmount}(address(this),tokenAmount,0,0,owner(),block.timestamp) (#839-846)
State variables written after the call(s):
- _tokenTransfer(from,to,amount,takeFee) (#810)
- _rOwned[address(this)] = _rOwned[address(this)].add(rLiquidity) (#717)
- _rOwned[_devWalletAddress] = _rOwned[_devWalletAddress].add(rDev) (#725)
- _rOwned[sender] = _rOwned[sender].sub(rAmount) (#881)
- _rOwned[sender] = _rOwned[sender].sub(rAmount) (#871)
- _rOwned[sender] = _rOwned[sender].sub(rAmount) (#893)
- _rOwned[sender] = _rOwned[sender].sub(rAmount) (#623)
- _rOwned[recipient] = _rOwned[recipient].add(rTransferAmount) (#872)
- _rOwned[recipient] = _rOwned[recipient].add(rTransferAmount) (#894)
- _rOwned[recipient] = _rOwned[recipient].add(rTransferAmount) (#883)
- _rOwned[recipient] = _rOwned[recipient].add(rTransferAmount) (#625)
- _tokenTransfer(from,to,amount,takeFee) (#810)
- _rTotal = _rTotal.sub(rFee) (#670)
- _tokenTransfer(from,to,amount,takeFee) (#810)
- _tOwned[address(this)] = _tOwned[address(this)].add(tLiquidity) (#719)
- _tOwned[_devWalletAddress] = _tOwned[_devWalletAddress].add(tDev) (#727)
- _tOwned[sender] = _tOwned[sender].sub(tAmount) (#892)
- _tOwned[sender] = _tOwned[sender].sub(tAmount) (#622)
- _tOwned[recipient] = _tOwned[recipient].add(tTransferAmount) (#882)
- _tOwned[recipient] = _tOwned[recipient].add(tTransferAmount) (#624)
Apply the check-effects-interactions pattern.

Additional information: link


Contract ownership is not renounced (belongs to a wallet)


Combination 1: Reentrancy vulnerabilities + Functions that send Ether to arbitraty destination. Usual for scams. May be justified by some complex mechanics (e.g. rebase, reflections). DYOR & manual audit are advised.


Unable to verify that contract auditor is trusted: Certik, Quantstamp, Hacken, Solidity, Paladinsec, Openzeppelin, Verichains

CoinToken.includeInReward(address) (#608-619) has costly operations inside a loop:
- _excluded.pop() (#615)
Use a local variable to hold the loop computation result.

Additional information: link

Address._verifyCallResult(bool,bytes,string) (#175-188) is never used and should be removed
Address.functionCall(address,bytes) (#135-137) is never used and should be removed
Address.functionCall(address,bytes,string) (#139-141) is never used and should be removed
Address.functionCallWithValue(address,bytes,uint256) (#143-145) is never used and should be removed
Address.functionCallWithValue(address,bytes,uint256,string) (#147-152) is never used and should be removed
Address.functionDelegateCall(address,bytes) (#165-167) is never used and should be removed
Address.functionDelegateCall(address,bytes,string) (#169-173) is never used and should be removed
Address.functionStaticCall(address,bytes) (#154-156) is never used and should be removed
Address.functionStaticCall(address,bytes,string) (#158-162) is never used and should be removed
Address.isContract(address) (#123-127) is never used and should be removed
Address.sendValue(address,uint256) (#129-133) is never used and should be removed
Context._msgData() (#114-117) is never used and should be removed
SafeMath.div(uint256,uint256,string) (#91-96) is never used and should be removed
SafeMath.mod(uint256,uint256) (#80-82) is never used and should be removed
SafeMath.mod(uint256,uint256,string) (#98-103) is never used and should be removed
SafeMath.tryAdd(uint256,uint256) (#20-26) is never used and should be removed
SafeMath.tryDiv(uint256,uint256) (#47-52) is never used and should be removed
SafeMath.tryMod(uint256,uint256) (#54-59) is never used and should be removed
SafeMath.tryMul(uint256,uint256) (#35-45) is never used and should be removed
SafeMath.trySub(uint256,uint256) (#28-33) is never used and should be removed
Remove unused functions.

Additional information: link

Low level call in Address.sendValue(address,uint256) (#129-133):
- (success) = recipient.call{value: amount}() (#131)
Low level call in Address.functionCallWithValue(address,bytes,uint256,string) (#147-152):
- (success,returndata) = target.call{value: value}(data) (#150)
Low level call in Address.functionStaticCall(address,bytes,string) (#158-162):
- (success,returndata) = target.staticcall(data) (#160)
Low level call in Address.functionDelegateCall(address,bytes,string) (#169-173):
- (success,returndata) = target.delegatecall(data) (#171)
Avoid low-level calls. Check the call success. If the call is meant for a contract, check for code existence

Additional information: link

CoinToken.constructor(string,string,uint256,uint256,uint256,uint256,uint256,address,address,address,address) (#476-512) performs a multiplication on the result of a division:
-_maxTxAmount = (_tTotal * 5 / 1000) * 10 ** _decimals (#489)
CoinToken.constructor(string,string,uint256,uint256,uint256,uint256,uint256,address,address,address,address) (#476-512) performs a multiplication on the result of a division:
-numTokensSellToAddToLiquidity = (_tTotal * 5 / 10000) * 10 ** _decimals (#490)
Consider ordering multiplication before division.

Additional information: link

CoinToken.addLiquidity(uint256,uint256) (#837-847) ignores return value by uniswapV2Router.addLiquidityETH{value: ethAmount}(address(this),tokenAmount,0,0,owner(),block.timestamp) (#839-846)
Ensure that all the return values of the function calls are used.

Additional information: link

CoinToken.allowance(address,address).owner (#540) shadows:
- Ownable.owner() (#204-206) (function)
CoinToken._approve(address,address,uint256).owner (#768) shadows:
- Ownable.owner() (#204-206) (function)
Rename the local variables that shadow another component.

Additional information: link

CoinToken.setTaxFeePercent(uint256) (#640-642) should emit an event for:
- _taxFee = taxFee (#641)
CoinToken.setDevFeePercent(uint256) (#644-646) should emit an event for:
- _devFee = devFee (#645)
CoinToken.setLiquidityFeePercent(uint256) (#648-650) should emit an event for:
- _liquidityFee = liquidityFee (#649)
CoinToken.setMaxTxPercent(uint256) (#652-654) should emit an event for:
- _maxTxAmount = maxTxPercent * 10 ** _decimals (#653)
CoinToken.setNumTokensSellToAddToLiquidity(uint256) (#908-910) should emit an event for:
- numTokensSellToAddToLiquidity = amountToUpdate (#909)
Emit an event for critical parameter changes.

Additional information: link

CoinToken.constructor(string,string,uint256,uint256,uint256,uint256,uint256,address,address,address,address).feeaddress (#476) lacks a zero-check on :
- _devWalletAddress = feeaddress (#491)
CoinToken.constructor(string,string,uint256,uint256,uint256,uint256,uint256,address,address,address,address).tokenOwner (#476) lacks a zero-check on :
- _owner = tokenOwner (#507)
CoinToken.constructor(string,string,uint256,uint256,uint256,uint256,uint256,address,address,address,address).service (#476) lacks a zero-check on :
- address(service).transfer(msg.value) (#508)
CoinToken.setDevWalletAddress(address)._addr (#656) lacks a zero-check on :
- _devWalletAddress = _addr (#657)
Check that the address is not zero.

Additional information: link

Reentrancy in CoinToken._transfer(address,address,uint256) (#776-811):
External calls:
- swapAndLiquify(contractTokenBalance) (#802)
- uniswapV2Router.addLiquidityETH{value: ethAmount}(address(this),tokenAmount,0,0,owner(),block.timestamp) (#839-846)
- uniswapV2Router.swapExactTokensForETHSupportingFeeOnTransferTokens(tokenAmount,0,path,address(this),block.timestamp) (#828-834)
External calls sending eth:
- swapAndLiquify(contractTokenBalance) (#802)
- uniswapV2Router.addLiquidityETH{value: ethAmount}(address(this),tokenAmount,0,0,owner(),block.timestamp) (#839-846)
State variables written after the call(s):
- _tokenTransfer(from,to,amount,takeFee) (#810)
- _devFee = _previousDevFee (#760)
- _devFee = 0 (#754)
- _tokenTransfer(from,to,amount,takeFee) (#810)
- _liquidityFee = _previousLiquidityFee (#761)
- _liquidityFee = 0 (#755)
- _tokenTransfer(from,to,amount,takeFee) (#810)
- _previousDevFee = _devFee (#750)
- _tokenTransfer(from,to,amount,takeFee) (#810)
- _previousLiquidityFee = _liquidityFee (#751)
- _tokenTransfer(from,to,amount,takeFee) (#810)
- _previousTaxFee = _taxFee (#749)
- _tokenTransfer(from,to,amount,takeFee) (#810)
- _tFeeTotal = _tFeeTotal.add(tFee) (#671)
- _tokenTransfer(from,to,amount,takeFee) (#810)
- _taxFee = _previousTaxFee (#759)
- _taxFee = 0 (#753)
Reentrancy in CoinToken.constructor(string,string,uint256,uint256,uint256,uint256,uint256,address,address,address,address) (#476-512):
External calls:
- uniswapV2Pair = IUniswapV2Factory(_uniswapV2Router.factory()).createPair(address(this),_uniswapV2Router.WETH()) (#497-498)
State variables written after the call(s):
- _isExcludedFromFee[tokenOwner] = true (#504)
- _isExcludedFromFee[address(this)] = true (#505)
- _owner = tokenOwner (#507)
- uniswapV2Router = _uniswapV2Router (#501)
Reentrancy in CoinToken.setRouterAddress(address) (#902-906):
External calls:
- uniswapV2Pair = IUniswapV2Factory(_uniswapV2Router.factory()).createPair(address(this),_uniswapV2Router.WETH()) (#904)
State variables written after the call(s):
- uniswapV2Router = _uniswapV2Router (#905)
Reentrancy in CoinToken.swapAndLiquify(uint256) (#813-821):
External calls:
- swapTokensForEth(half) (#817)
- uniswapV2Router.swapExactTokensForETHSupportingFeeOnTransferTokens(tokenAmount,0,path,address(this),block.timestamp) (#828-834)
- addLiquidity(otherHalf,newBalance) (#819)
- uniswapV2Router.addLiquidityETH{value: ethAmount}(address(this),tokenAmount,0,0,owner(),block.timestamp) (#839-846)
External calls sending eth:
- addLiquidity(otherHalf,newBalance) (#819)
- uniswapV2Router.addLiquidityETH{value: ethAmount}(address(this),tokenAmount,0,0,owner(),block.timestamp) (#839-846)
State variables written after the call(s):
- addLiquidity(otherHalf,newBalance) (#819)
- _allowances[owner][spender] = amount (#772)
Reentrancy in CoinToken.transferFrom(address,address,uint256) (#549-553):
External calls:
- _transfer(sender,recipient,amount) (#550)
- uniswapV2Router.addLiquidityETH{value: ethAmount}(address(this),tokenAmount,0,0,owner(),block.timestamp) (#839-846)
- uniswapV2Router.swapExactTokensForETHSupportingFeeOnTransferTokens(tokenAmount,0,path,address(this),block.timestamp) (#828-834)
External calls sending eth:
- _transfer(sender,recipient,amount) (#550)
- uniswapV2Router.addLiquidityETH{value: ethAmount}(address(this),tokenAmount,0,0,owner(),block.timestamp) (#839-846)
State variables written after the call(s):
- _approve(sender,_msgSender(),_allowances[sender][_msgSender()].sub(amount,ERC20: transfer amount exceeds allowance)) (#551)
- _allowances[owner][spender] = amount (#772)
Apply the check-effects-interactions pattern.

Additional information: link

Reentrancy in CoinToken._transfer(address,address,uint256) (#776-811):
External calls:
- swapAndLiquify(contractTokenBalance) (#802)
- uniswapV2Router.addLiquidityETH{value: ethAmount}(address(this),tokenAmount,0,0,owner(),block.timestamp) (#839-846)
- uniswapV2Router.swapExactTokensForETHSupportingFeeOnTransferTokens(tokenAmount,0,path,address(this),block.timestamp) (#828-834)
External calls sending eth:
- swapAndLiquify(contractTokenBalance) (#802)
- uniswapV2Router.addLiquidityETH{value: ethAmount}(address(this),tokenAmount,0,0,owner(),block.timestamp) (#839-846)
Event emitted after the call(s):
- Transfer(sender,recipient,tTransferAmount) (#876)
- _tokenTransfer(from,to,amount,takeFee) (#810)
- Transfer(sender,recipient,tTransferAmount) (#898)
- _tokenTransfer(from,to,amount,takeFee) (#810)
- Transfer(sender,recipient,tTransferAmount) (#887)
- _tokenTransfer(from,to,amount,takeFee) (#810)
- Transfer(sender,recipient,tTransferAmount) (#629)
- _tokenTransfer(from,to,amount,takeFee) (#810)
Reentrancy in CoinToken.constructor(string,string,uint256,uint256,uint256,uint256,uint256,address,address,address,address) (#476-512):
External calls:
- uniswapV2Pair = IUniswapV2Factory(_uniswapV2Router.factory()).createPair(address(this),_uniswapV2Router.WETH()) (#497-498)
External calls sending eth:
- address(service).transfer(msg.value) (#508)
Event emitted after the call(s):
- Transfer(address(0),tokenOwner,_tTotal) (#509)
Reentrancy in CoinToken.swapAndLiquify(uint256) (#813-821):
External calls:
- swapTokensForEth(half) (#817)
- uniswapV2Router.swapExactTokensForETHSupportingFeeOnTransferTokens(tokenAmount,0,path,address(this),block.timestamp) (#828-834)
- addLiquidity(otherHalf,newBalance) (#819)
- uniswapV2Router.addLiquidityETH{value: ethAmount}(address(this),tokenAmount,0,0,owner(),block.timestamp) (#839-846)
External calls sending eth:
- addLiquidity(otherHalf,newBalance) (#819)
- uniswapV2Router.addLiquidityETH{value: ethAmount}(address(this),tokenAmount,0,0,owner(),block.timestamp) (#839-846)
Event emitted after the call(s):
- Approval(owner,spender,amount) (#773)
- addLiquidity(otherHalf,newBalance) (#819)
- SwapAndLiquify(half,newBalance,otherHalf) (#820)
Reentrancy in CoinToken.transferFrom(address,address,uint256) (#549-553):
External calls:
- _transfer(sender,recipient,amount) (#550)
- uniswapV2Router.addLiquidityETH{value: ethAmount}(address(this),tokenAmount,0,0,owner(),block.timestamp) (#839-846)
- uniswapV2Router.swapExactTokensForETHSupportingFeeOnTransferTokens(tokenAmount,0,path,address(this),block.timestamp) (#828-834)
External calls sending eth:
- _transfer(sender,recipient,amount) (#550)
- uniswapV2Router.addLiquidityETH{value: ethAmount}(address(this),tokenAmount,0,0,owner(),block.timestamp) (#839-846)
Event emitted after the call(s):
- Approval(owner,spender,amount) (#773)
- _approve(sender,_msgSender(),_allowances[sender][_msgSender()].sub(amount,ERC20: transfer amount exceeds allowance)) (#551)
Apply the check-effects-interactions pattern.

Additional information: link

Ownable.unlock() (#235-240) uses timestamp for comparisons
Dangerous comparisons:
- require(bool,string)(block.timestamp > _lockTime,Contract is locked.) (#237)
Avoid relying on block.timestamp.

Additional information: link

Address.isContract(address) (#123-127) uses assembly
- INLINE ASM (#125)
Address._verifyCallResult(bool,bytes,string) (#175-188) uses assembly
- INLINE ASM (#180-183)
Do not use evm assembly.

Additional information: link

Variable Ownable._owner (#194) is not in mixedCase
Variable Ownable._lockTime (#196) is not in mixedCase
Function IUniswapV2Pair.DOMAIN_SEPARATOR() (#267) is not in mixedCase
Function IUniswapV2Pair.PERMIT_TYPEHASH() (#268) is not in mixedCase
Function IUniswapV2Pair.MINIMUM_LIQUIDITY() (#282) is not in mixedCase
Function IUniswapV2Router01.WETH() (#300) is not in mixedCase
Parameter CoinToken.setDevWalletAddress(address)._addr (#656) is not in mixedCase
Parameter CoinToken.setSwapAndLiquifyEnabled(bool)._enabled (#661) is not in mixedCase
Parameter CoinToken.calculateTaxFee(uint256)._amount (#730) is not in mixedCase
Parameter CoinToken.calculateDevFee(uint256)._amount (#736) is not in mixedCase
Parameter CoinToken.calculateLiquidityFee(uint256)._amount (#742) is not in mixedCase
Variable CoinToken._devWalletAddress (#442) is not in mixedCase
Variable CoinToken._taxFee (#450) is not in mixedCase
Variable CoinToken._devFee (#452) is not in mixedCase
Variable CoinToken._liquidityFee (#454) is not in mixedCase
Variable CoinToken._maxTxAmount (#460) is not in mixedCase
Follow the Solidity naming convention.

Additional information: link

Redundant expression "this (#115)" inContext (#109-118)
Remove redundant statements if they congest code but offer no value.

Additional information: link

Reentrancy in CoinToken.constructor(string,string,uint256,uint256,uint256,uint256,uint256,address,address,address,address) (#476-512):
External calls:
- address(service).transfer(msg.value) (#508)
Event emitted after the call(s):
- Transfer(address(0),tokenOwner,_tTotal) (#509)
Apply the check-effects-interactions pattern.

Additional information: link

Variable IUniswapV2Router01.addLiquidity(address,address,uint256,uint256,uint256,uint256,address,uint256).amountADesired (#304) is too similar to IUniswapV2Router01.addLiquidity(address,address,uint256,uint256,uint256,uint256,address,uint256).amountBDesired (#305)
Variable CoinToken._getValues(uint256).rTransferAmount (#676) is too similar to CoinToken._transferBothExcluded(address,address,uint256).tTransferAmount (#621)
Variable CoinToken._transferBothExcluded(address,address,uint256).rTransferAmount (#621) is too similar to CoinToken._transferToExcluded(address,address,uint256).tTransferAmount (#880)
Variable CoinToken._transferToExcluded(address,address,uint256).rTransferAmount (#880) is too similar to CoinToken._transferToExcluded(address,address,uint256).tTransferAmount (#880)
Variable CoinToken.reflectionFromToken(uint256,bool).rTransferAmount (#588) is too similar to CoinToken._getValues(uint256).tTransferAmount (#675)
Variable CoinToken._getValues(uint256).rTransferAmount (#676) is too similar to CoinToken._getValues(uint256).tTransferAmount (#675)
Variable CoinToken.reflectionFromToken(uint256,bool).rTransferAmount (#588) is too similar to CoinToken._transferToExcluded(address,address,uint256).tTransferAmount (#880)
Variable CoinToken._transferBothExcluded(address,address,uint256).rTransferAmount (#621) is too similar to CoinToken._transferBothExcluded(address,address,uint256).tTransferAmount (#621)
Variable CoinToken._getRValues(uint256,uint256,uint256,uint256,uint256).rTransferAmount (#693) is too similar to CoinToken._transferToExcluded(address,address,uint256).tTransferAmount (#880)
Variable CoinToken._getValues(uint256).rTransferAmount (#676) is too similar to CoinToken._transferToExcluded(address,address,uint256).tTransferAmount (#880)
Variable CoinToken._getValues(uint256).rTransferAmount (#676) is too similar to CoinToken._getTValues(uint256).tTransferAmount (#684)
Variable CoinToken._transferBothExcluded(address,address,uint256).rTransferAmount (#621) is too similar to CoinToken._getValues(uint256).tTransferAmount (#675)
Variable CoinToken._transferFromExcluded(address,address,uint256).rTransferAmount (#891) is too similar to CoinToken._transferToExcluded(address,address,uint256).tTransferAmount (#880)
Variable CoinToken.reflectionFromToken(uint256,bool).rTransferAmount (#588) is too similar to CoinToken._transferBothExcluded(address,address,uint256).tTransferAmount (#621)
Variable CoinToken._transferFromExcluded(address,address,uint256).rTransferAmount (#891) is too similar to CoinToken._getValues(uint256).tTransferAmount (#675)
Variable CoinToken._transferToExcluded(address,address,uint256).rTransferAmount (#880) is too similar to CoinToken._getValues(uint256).tTransferAmount (#675)
Variable CoinToken._getRValues(uint256,uint256,uint256,uint256,uint256).rTransferAmount (#693) is too similar to CoinToken._getValues(uint256).tTransferAmount (#675)
Variable CoinToken._transferFromExcluded(address,address,uint256).rTransferAmount (#891) is too similar to CoinToken._getTValues(uint256).tTransferAmount (#684)
Variable CoinToken._transferFromExcluded(address,address,uint256).rTransferAmount (#891) is too similar to CoinToken._transferStandard(address,address,uint256).tTransferAmount (#870)
Variable CoinToken._transferToExcluded(address,address,uint256).rTransferAmount (#880) is too similar to CoinToken._transferStandard(address,address,uint256).tTransferAmount (#870)
Variable CoinToken._transferFromExcluded(address,address,uint256).rTransferAmount (#891) is too similar to CoinToken._transferFromExcluded(address,address,uint256).tTransferAmount (#891)
Variable CoinToken._transferToExcluded(address,address,uint256).rTransferAmount (#880) is too similar to CoinToken._getTValues(uint256).tTransferAmount (#684)
Variable CoinToken._getRValues(uint256,uint256,uint256,uint256,uint256).rTransferAmount (#693) is too similar to CoinToken._transferStandard(address,address,uint256).tTransferAmount (#870)
Variable CoinToken._transferStandard(address,address,uint256).rTransferAmount (#870) is too similar to CoinToken._getValues(uint256).tTransferAmount (#675)
Variable CoinToken._getRValues(uint256,uint256,uint256,uint256,uint256).rTransferAmount (#693) is too similar to CoinToken._getTValues(uint256).tTransferAmount (#684)
Variable CoinToken._transferFromExcluded(address,address,uint256).rTransferAmount (#891) is too similar to CoinToken._transferBothExcluded(address,address,uint256).tTransferAmount (#621)
Variable CoinToken._transferToExcluded(address,address,uint256).rTransferAmount (#880) is too similar to CoinToken._transferFromExcluded(address,address,uint256).tTransferAmount (#891)
Variable CoinToken._getRValues(uint256,uint256,uint256,uint256,uint256).rTransferAmount (#693) is too similar to CoinToken._transferFromExcluded(address,address,uint256).tTransferAmount (#891)
Variable CoinToken._transferToExcluded(address,address,uint256).rTransferAmount (#880) is too similar to CoinToken._transferBothExcluded(address,address,uint256).tTransferAmount (#621)
Variable CoinToken._getRValues(uint256,uint256,uint256,uint256,uint256).rTransferAmount (#693) is too similar to CoinToken._transferBothExcluded(address,address,uint256).tTransferAmount (#621)
Variable CoinToken._transferStandard(address,address,uint256).rTransferAmount (#870) is too similar to CoinToken._transferToExcluded(address,address,uint256).tTransferAmount (#880)
Variable CoinToken._transferStandard(address,address,uint256).rTransferAmount (#870) is too similar to CoinToken._transferStandard(address,address,uint256).tTransferAmount (#870)
Variable CoinToken._transferStandard(address,address,uint256).rTransferAmount (#870) is too similar to CoinToken._getTValues(uint256).tTransferAmount (#684)
Variable CoinToken.reflectionFromToken(uint256,bool).rTransferAmount (#588) is too similar to CoinToken._transferStandard(address,address,uint256).tTransferAmount (#870)
Variable CoinToken.reflectionFromToken(uint256,bool).rTransferAmount (#588) is too similar to CoinToken._getTValues(uint256).tTransferAmount (#684)
Variable CoinToken._transferStandard(address,address,uint256).rTransferAmount (#870) is too similar to CoinToken._transferFromExcluded(address,address,uint256).tTransferAmount (#891)
Variable CoinToken._transferStandard(address,address,uint256).rTransferAmount (#870) is too similar to CoinToken._transferBothExcluded(address,address,uint256).tTransferAmount (#621)
Variable CoinToken.reflectionFromToken(uint256,bool).rTransferAmount (#588) is too similar to CoinToken._transferFromExcluded(address,address,uint256).tTransferAmount (#891)
Variable CoinToken._getValues(uint256).rTransferAmount (#676) is too similar to CoinToken._transferStandard(address,address,uint256).tTransferAmount (#870)
Variable CoinToken._getValues(uint256).rTransferAmount (#676) is too similar to CoinToken._transferFromExcluded(address,address,uint256).tTransferAmount (#891)
Variable CoinToken._transferBothExcluded(address,address,uint256).rTransferAmount (#621) is too similar to CoinToken._transferStandard(address,address,uint256).tTransferAmount (#870)
Variable CoinToken._transferBothExcluded(address,address,uint256).rTransferAmount (#621) is too similar to CoinToken._getTValues(uint256).tTransferAmount (#684)
Variable CoinToken._transferBothExcluded(address,address,uint256).rTransferAmount (#621) is too similar to CoinToken._transferFromExcluded(address,address,uint256).tTransferAmount (#891)
Prevent variables from having similar names.

Additional information: link

renounceOwnership() should be declared external:
- Ownable.renounceOwnership() (#213-216)
transferOwnership(address) should be declared external:
- Ownable.transferOwnership(address) (#219-223)
lock(uint256) should be declared external:
- Ownable.lock(uint256) (#227-232)
unlock() should be declared external:
- Ownable.unlock() (#235-240)
name() should be declared external:
- CoinToken.name() (#514-516)
symbol() should be declared external:
- CoinToken.symbol() (#518-520)
decimals() should be declared external:
- CoinToken.decimals() (#522-524)
totalSupply() should be declared external:
- CoinToken.totalSupply() (#526-528)
transfer(address,uint256) should be declared external:
- CoinToken.transfer(address,uint256) (#535-538)
allowance(address,address) should be declared external:
- CoinToken.allowance(address,address) (#540-542)
approve(address,uint256) should be declared external:
- CoinToken.approve(address,uint256) (#544-547)
transferFrom(address,address,uint256) should be declared external:
- CoinToken.transferFrom(address,address,uint256) (#549-553)
increaseAllowance(address,uint256) should be declared external:
- CoinToken.increaseAllowance(address,uint256) (#555-558)
decreaseAllowance(address,uint256) should be declared external:
- CoinToken.decreaseAllowance(address,uint256) (#560-563)
isExcludedFromReward(address) should be declared external:
- CoinToken.isExcludedFromReward(address) (#565-567)
totalFees() should be declared external:
- CoinToken.totalFees() (#569-571)
deliver(uint256) should be declared external:
- CoinToken.deliver(uint256) (#573-580)
reflectionFromToken(uint256,bool) should be declared external:
- CoinToken.reflectionFromToken(uint256,bool) (#582-591)
excludeFromReward(address) should be declared external:
- CoinToken.excludeFromReward(address) (#599-606)
excludeFromFee(address) should be declared external:
- CoinToken.excludeFromFee(address) (#632-634)
includeInFee(address) should be declared external:
- CoinToken.includeInFee(address) (#636-638)
setMaxTxPercent(uint256) should be declared external:
- CoinToken.setMaxTxPercent(uint256) (#652-654)
setDevWalletAddress(address) should be declared external:
- CoinToken.setDevWalletAddress(address) (#656-658)
setSwapAndLiquifyEnabled(bool) should be declared external:
- CoinToken.setSwapAndLiquifyEnabled(bool) (#661-664)
isExcludedFromFee(address) should be declared external:
- CoinToken.isExcludedFromFee(address) (#764-766)
Use the external attribute for functions never called from the contract.

Additional information: link

Holders:


Average 30d PancakeSwap liquidity is less than $100. Token is either dead or inactive.


Average 30d PancakeSwap volume is less than $100. Token is either dead or inactive.


Average 30d number of PancakeSwap swaps is less than 1. Token is either dead or inactive.


Average PancakeSwap trading volume, liqudity, number of swaps are extremely low. Token seems to be dead.

Contract has 10% buy tax and 9% sell tax.
Taxes are low but contract ownership is not renounced. Token has a high risk of becoming a honeypot.


Token is deployed only at one blockchain


Token has only one trading pair


Twitter account link seems to be invalid


Unable to find Blog account (Reddit or Medium)


Unable to find Youtube account


Unable to find Discord account

Search:


BscScan page for the token does not contain additional info: website, socials, description, etc.

Additional information: link


Unable to find token on CoinGecko

Additional information: link


Unable to find token on CoinMarketCap

Additional information: link


Unable to find whitepaper link on the website


Unable to find Telegram link on the website


Unable to find Twitter link on the website


Token is not listed at Mobula.Finance

Additional information: link


Unable to find token on CoinHunt

Additional information: link


Unable to find code repository for the project


Token has no active CoinGecko listing / rank


Token has no active CoinMarketCap listing / rank


Token has a considerable age, but social accounts / website are missing or have few users


Token has a considerable age, but average PancakeSwap 30d trading volume is low


Young tokens have high risks of price dump / death


Young tokens have high risks of price dump / death

Anti-Scam Checks

Price for PoliceCrypto