PaybyWEB3 Token Logo

PBW [PaybyWEB3] Token

About PBW

Listings

Token 17 days
white paper

PaybyWEB3 is currently only available for businesses. Businesses can start receiving payments with cryptocurrency by integrating PaybyWEB3 technology into their websites. With the lowest commissions and fast transfer, you can offer your customers a crypto payment system.

Why Will $PBW Token Rise?
There are already hundreds of online stores that want to work with PaybyWEB3. Our marketing efforts continue.

Thousands of transactions will be made every day through PaybyWEB3. 50% of the commissions generated will be used directly as the Buy Back budget. This transaction will take place on a daily basis and reports will be presented to investors. This process is completely automatic.
In addition, an automatic BuyBack will be performed with 50% of the tax income generated in trading.
Marketing efforts will continue without stopping.

Social

Laser Scorebeta Last Audit: 15 May 2022

report
Code:

Third Party Audit: untrusted audit

LiquidityGeneratorToken.addLiquidity(uint256,uint256) (#1532-1545) sends eth to arbitrary user
Dangerous calls:
- uniswapV2Router.addLiquidityETH{value: ethAmount}(address(this),tokenAmount,0,0,owner(),block.timestamp) (#1537-1544)
Ensure that an arbitrary user cannot withdraw unauthorized funds.

Additional information: link

Reentrancy in LiquidityGeneratorToken._transfer(address,address,uint256) (#1451-1489):
External calls:
- swapAndLiquify(contractTokenBalance) (#1476)
- uniswapV2Router.addLiquidityETH{value: ethAmount}(address(this),tokenAmount,0,0,owner(),block.timestamp) (#1537-1544)
- uniswapV2Router.swapExactTokensForETHSupportingFeeOnTransferTokens(tokenAmount,0,path,address(this),block.timestamp) (#1523-1529)
External calls sending eth:
- swapAndLiquify(contractTokenBalance) (#1476)
- uniswapV2Router.addLiquidityETH{value: ethAmount}(address(this),tokenAmount,0,0,owner(),block.timestamp) (#1537-1544)
State variables written after the call(s):
- _tokenTransfer(from,to,amount,takeFee) (#1488)
- _rOwned[address(this)] = _rOwned[address(this)].add(rLiquidity) (#1378)
- _rOwned[_charityAddress] = _rOwned[_charityAddress].add(rCharity) (#1387)
- _rOwned[sender] = _rOwned[sender].sub(rAmount) (#1607)
- _rOwned[sender] = _rOwned[sender].sub(rAmount) (#1585)
- _rOwned[recipient] = _rOwned[recipient].add(rTransferAmount) (#1586)
- _rOwned[sender] = _rOwned[sender].sub(rAmount) (#1225)
- _rOwned[sender] = _rOwned[sender].sub(rAmount) (#1631)
- _rOwned[recipient] = _rOwned[recipient].add(rTransferAmount) (#1632)
- _rOwned[recipient] = _rOwned[recipient].add(rTransferAmount) (#1609)
- _rOwned[recipient] = _rOwned[recipient].add(rTransferAmount) (#1227)
- _tokenTransfer(from,to,amount,takeFee) (#1488)
- _rTotal = _rTotal.sub(rFee) (#1270)
- _tokenTransfer(from,to,amount,takeFee) (#1488)
- _tOwned[address(this)] = _tOwned[address(this)].add(tLiquidity) (#1380)
- _tOwned[_charityAddress] = _tOwned[_charityAddress].add(tCharity) (#1389-1391)
- _tOwned[sender] = _tOwned[sender].sub(tAmount) (#1224)
- _tOwned[sender] = _tOwned[sender].sub(tAmount) (#1630)
- _tOwned[recipient] = _tOwned[recipient].add(tTransferAmount) (#1608)
- _tOwned[recipient] = _tOwned[recipient].add(tTransferAmount) (#1226)
Apply the check-effects-interactions pattern.

Additional information: link


Unable to verify that contract auditor is trusted: Certik, Quantstamp, Hacken, Solidity, Paladinsec, Openzeppelin, Verichains


Contract ownership is not renounced (belongs to a wallet)

LiquidityGeneratorToken.constructor(string,string,uint256,address,address,uint16,uint16,uint16,address,uint256) (#972-1043) contains a tautology or contradiction:
- require(bool,string)(liquidityFeeBps_ >= 0,Invalid liquidity fee) (#985)
LiquidityGeneratorToken.constructor(string,string,uint256,address,address,uint16,uint16,uint16,address,uint256) (#972-1043) contains a tautology or contradiction:
- require(bool,string)(charityFeeBps_ >= 0,Invalid charity fee) (#986)
LiquidityGeneratorToken.constructor(string,string,uint256,address,address,uint16,uint16,uint16,address,uint256) (#972-1043) contains a tautology or contradiction:
- require(bool,string)(taxFeeBps_ >= 0,Invalid tax fee) (#984)
Fix the incorrect comparison by changing the value type or the comparison.

Additional information: link


Combination 1: Reentrancy vulnerabilities + Functions that send Ether to arbitraty destination. Usual for scams. May be justified by some complex mechanics (e.g. rebase, reflections). DYOR & manual audit are advised.

LiquidityGeneratorToken.allowance(address,address).owner (#1075) shadows:
- Ownable.owner() (#146-148) (function)
LiquidityGeneratorToken._approve(address,address,uint256).owner (#1440) shadows:
- Ownable.owner() (#146-148) (function)
Rename the local variables that shadow another component.

Additional information: link

LiquidityGeneratorToken.setTaxFeePercent(uint256) (#1242-1248) should emit an event for:
- _taxFee = taxFeeBps (#1243)
LiquidityGeneratorToken.setLiquidityFeePercent(uint256) (#1250-1259) should emit an event for:
- _liquidityFee = liquidityFeeBps (#1254)
Emit an event for critical parameter changes.

Additional information: link

LiquidityGeneratorToken.constructor(string,string,uint256,address,address,uint16,uint16,uint16,address,uint256).serviceFeeReceiver_ (#981) lacks a zero-check on :
- address(serviceFeeReceiver_).transfer(serviceFee_) (#1042)
Check that the address is not zero.

Additional information: link

LiquidityGeneratorToken.addLiquidity(uint256,uint256) (#1532-1545) ignores return value by uniswapV2Router.addLiquidityETH{value: ethAmount}(address(this),tokenAmount,0,0,owner(),block.timestamp) (#1537-1544)
Ensure that all the return values of the function calls are used.

Additional information: link

Reentrancy in LiquidityGeneratorToken._transfer(address,address,uint256) (#1451-1489):
External calls:
- swapAndLiquify(contractTokenBalance) (#1476)
- uniswapV2Router.addLiquidityETH{value: ethAmount}(address(this),tokenAmount,0,0,owner(),block.timestamp) (#1537-1544)
- uniswapV2Router.swapExactTokensForETHSupportingFeeOnTransferTokens(tokenAmount,0,path,address(this),block.timestamp) (#1523-1529)
External calls sending eth:
- swapAndLiquify(contractTokenBalance) (#1476)
- uniswapV2Router.addLiquidityETH{value: ethAmount}(address(this),tokenAmount,0,0,owner(),block.timestamp) (#1537-1544)
State variables written after the call(s):
- _tokenTransfer(from,to,amount,takeFee) (#1488)
- _charityFee = _previousCharityFee (#1432)
- _charityFee = 0 (#1426)
- _tokenTransfer(from,to,amount,takeFee) (#1488)
- _liquidityFee = _previousLiquidityFee (#1431)
- _liquidityFee = 0 (#1425)
- _tokenTransfer(from,to,amount,takeFee) (#1488)
- _previousCharityFee = _charityFee (#1422)
- _tokenTransfer(from,to,amount,takeFee) (#1488)
- _previousLiquidityFee = _liquidityFee (#1421)
- _tokenTransfer(from,to,amount,takeFee) (#1488)
- _previousTaxFee = _taxFee (#1420)
- _tokenTransfer(from,to,amount,takeFee) (#1488)
- _tFeeTotal = _tFeeTotal.add(tFee) (#1271)
- _tokenTransfer(from,to,amount,takeFee) (#1488)
- _taxFee = _previousTaxFee (#1430)
- _taxFee = 0 (#1424)
Reentrancy in LiquidityGeneratorToken.constructor(string,string,uint256,address,address,uint16,uint16,uint16,address,uint256) (#972-1043):
External calls:
- uniswapV2Pair = IUniswapV2Factory(_uniswapV2Router.factory()).createPair(address(this),_uniswapV2Router.WETH()) (#1023-1024)
State variables written after the call(s):
- _isExcludedFromFee[owner()] = true (#1030)
- _isExcludedFromFee[address(this)] = true (#1031)
- uniswapV2Router = _uniswapV2Router (#1027)
Reentrancy in LiquidityGeneratorToken.swapAndLiquify(uint256) (#1491-1512):
External calls:
- swapTokensForEth(half) (#1503)
- uniswapV2Router.swapExactTokensForETHSupportingFeeOnTransferTokens(tokenAmount,0,path,address(this),block.timestamp) (#1523-1529)
- addLiquidity(otherHalf,newBalance) (#1509)
- uniswapV2Router.addLiquidityETH{value: ethAmount}(address(this),tokenAmount,0,0,owner(),block.timestamp) (#1537-1544)
External calls sending eth:
- addLiquidity(otherHalf,newBalance) (#1509)
- uniswapV2Router.addLiquidityETH{value: ethAmount}(address(this),tokenAmount,0,0,owner(),block.timestamp) (#1537-1544)
State variables written after the call(s):
- addLiquidity(otherHalf,newBalance) (#1509)
- _allowances[owner][spender] = amount (#1447)
Reentrancy in LiquidityGeneratorToken.transferFrom(address,address,uint256) (#1093-1108):
External calls:
- _transfer(sender,recipient,amount) (#1098)
- uniswapV2Router.addLiquidityETH{value: ethAmount}(address(this),tokenAmount,0,0,owner(),block.timestamp) (#1537-1544)
- uniswapV2Router.swapExactTokensForETHSupportingFeeOnTransferTokens(tokenAmount,0,path,address(this),block.timestamp) (#1523-1529)
External calls sending eth:
- _transfer(sender,recipient,amount) (#1098)
- uniswapV2Router.addLiquidityETH{value: ethAmount}(address(this),tokenAmount,0,0,owner(),block.timestamp) (#1537-1544)
State variables written after the call(s):
- _approve(sender,_msgSender(),_allowances[sender][_msgSender()].sub(amount,ERC20: transfer amount exceeds allowance)) (#1099-1106)
- _allowances[owner][spender] = amount (#1447)
Apply the check-effects-interactions pattern.

Additional information: link

Reentrancy in LiquidityGeneratorToken._transfer(address,address,uint256) (#1451-1489):
External calls:
- swapAndLiquify(contractTokenBalance) (#1476)
- uniswapV2Router.addLiquidityETH{value: ethAmount}(address(this),tokenAmount,0,0,owner(),block.timestamp) (#1537-1544)
- uniswapV2Router.swapExactTokensForETHSupportingFeeOnTransferTokens(tokenAmount,0,path,address(this),block.timestamp) (#1523-1529)
External calls sending eth:
- swapAndLiquify(contractTokenBalance) (#1476)
- uniswapV2Router.addLiquidityETH{value: ethAmount}(address(this),tokenAmount,0,0,owner(),block.timestamp) (#1537-1544)
Event emitted after the call(s):
- Transfer(_msgSender(),_charityAddress,tCharity) (#1392)
- _tokenTransfer(from,to,amount,takeFee) (#1488)
- Transfer(sender,recipient,tTransferAmount) (#1590)
- _tokenTransfer(from,to,amount,takeFee) (#1488)
- Transfer(sender,recipient,tTransferAmount) (#1613)
- _tokenTransfer(from,to,amount,takeFee) (#1488)
- Transfer(sender,recipient,tTransferAmount) (#1636)
- _tokenTransfer(from,to,amount,takeFee) (#1488)
- Transfer(sender,recipient,tTransferAmount) (#1231)
- _tokenTransfer(from,to,amount,takeFee) (#1488)
Reentrancy in LiquidityGeneratorToken.constructor(string,string,uint256,address,address,uint16,uint16,uint16,address,uint256) (#972-1043):
External calls:
- uniswapV2Pair = IUniswapV2Factory(_uniswapV2Router.factory()).createPair(address(this),_uniswapV2Router.WETH()) (#1023-1024)
Event emitted after the call(s):
- TokenCreated(owner(),address(this),TokenType.liquidityGenerator,VERSION) (#1035-1040)
- Transfer(address(0),owner(),_tTotal) (#1033)
Reentrancy in LiquidityGeneratorToken.swapAndLiquify(uint256) (#1491-1512):
External calls:
- swapTokensForEth(half) (#1503)
- uniswapV2Router.swapExactTokensForETHSupportingFeeOnTransferTokens(tokenAmount,0,path,address(this),block.timestamp) (#1523-1529)
- addLiquidity(otherHalf,newBalance) (#1509)
- uniswapV2Router.addLiquidityETH{value: ethAmount}(address(this),tokenAmount,0,0,owner(),block.timestamp) (#1537-1544)
External calls sending eth:
- addLiquidity(otherHalf,newBalance) (#1509)
- uniswapV2Router.addLiquidityETH{value: ethAmount}(address(this),tokenAmount,0,0,owner(),block.timestamp) (#1537-1544)
Event emitted after the call(s):
- Approval(owner,spender,amount) (#1448)
- addLiquidity(otherHalf,newBalance) (#1509)
- SwapAndLiquify(half,newBalance,otherHalf) (#1511)
Reentrancy in LiquidityGeneratorToken.transferFrom(address,address,uint256) (#1093-1108):
External calls:
- _transfer(sender,recipient,amount) (#1098)
- uniswapV2Router.addLiquidityETH{value: ethAmount}(address(this),tokenAmount,0,0,owner(),block.timestamp) (#1537-1544)
- uniswapV2Router.swapExactTokensForETHSupportingFeeOnTransferTokens(tokenAmount,0,path,address(this),block.timestamp) (#1523-1529)
External calls sending eth:
- _transfer(sender,recipient,amount) (#1098)
- uniswapV2Router.addLiquidityETH{value: ethAmount}(address(this),tokenAmount,0,0,owner(),block.timestamp) (#1537-1544)
Event emitted after the call(s):
- Approval(owner,spender,amount) (#1448)
- _approve(sender,_msgSender(),_allowances[sender][_msgSender()].sub(amount,ERC20: transfer amount exceeds allowance)) (#1099-1106)
Apply the check-effects-interactions pattern.

Additional information: link

Address.isContract(address) (#441-451) uses assembly
- INLINE ASM (#447-449)
Address.verifyCallResult(bool,bytes,string) (#610-630) uses assembly
- INLINE ASM (#622-625)
Do not use evm assembly.

Additional information: link

LiquidityGeneratorToken.includeInReward(address) (#1197-1208) has costly operations inside a loop:
- _excluded.pop() (#1204)
Use a local variable to hold the loop computation result.

Additional information: link

Address.functionCall(address,bytes) (#494-496) is never used and should be removed
Address.functionCall(address,bytes,string) (#504-510) is never used and should be removed
Address.functionCallWithValue(address,bytes,uint256) (#523-529) is never used and should be removed
Address.functionCallWithValue(address,bytes,uint256,string) (#537-548) is never used and should be removed
Address.functionDelegateCall(address,bytes) (#583-585) is never used and should be removed
Address.functionDelegateCall(address,bytes,string) (#593-602) is never used and should be removed
Address.functionStaticCall(address,bytes) (#556-558) is never used and should be removed
Address.functionStaticCall(address,bytes,string) (#566-575) is never used and should be removed
Address.isContract(address) (#441-451) is never used and should be removed
Address.sendValue(address,uint256) (#469-474) is never used and should be removed
Address.verifyCallResult(bool,bytes,string) (#610-630) is never used and should be removed
Context._msgData() (#106-108) is never used and should be removed
SafeMath.div(uint256,uint256,string) (#376-385) is never used and should be removed
SafeMath.mod(uint256,uint256) (#336-338) is never used and should be removed
SafeMath.mod(uint256,uint256,string) (#402-411) is never used and should be removed
SafeMath.tryAdd(uint256,uint256) (#207-213) is never used and should be removed
SafeMath.tryDiv(uint256,uint256) (#249-254) is never used and should be removed
SafeMath.tryMod(uint256,uint256) (#261-266) is never used and should be removed
SafeMath.tryMul(uint256,uint256) (#232-242) is never used and should be removed
SafeMath.trySub(uint256,uint256) (#220-225) is never used and should be removed
Remove unused functions.

Additional information: link

LiquidityGeneratorToken._previousTaxFee (#941) is set pre-construction with a non-constant function or state variable:
- _taxFee
LiquidityGeneratorToken._previousLiquidityFee (#944) is set pre-construction with a non-constant function or state variable:
- _liquidityFee
LiquidityGeneratorToken._previousCharityFee (#947) is set pre-construction with a non-constant function or state variable:
- _charityFee
Remove any initialization of state variables via non-constant state variables or function calls. If variables must be set upon contract deployment, locate initialization in the constructor instead.

Additional information: link

Low level call in Address.sendValue(address,uint256) (#469-474):
- (success) = recipient.call{value: amount}() (#472)
Low level call in Address.functionCallWithValue(address,bytes,uint256,string) (#537-548):
- (success,returndata) = target.call{value: value}(data) (#546)
Low level call in Address.functionStaticCall(address,bytes,string) (#566-575):
- (success,returndata) = target.staticcall(data) (#573)
Low level call in Address.functionDelegateCall(address,bytes,string) (#593-602):
- (success,returndata) = target.delegatecall(data) (#600)
Avoid low-level calls. Check the call success. If the call is meant for a contract, check for code existence

Additional information: link

Function IUniswapV2Router01.WETH() (#641) is not in mixedCase
Parameter LiquidityGeneratorToken.setSwapAndLiquifyEnabled(bool)._enabled (#1261) is not in mixedCase
Parameter LiquidityGeneratorToken.calculateTaxFee(uint256)._amount (#1396) is not in mixedCase
Parameter LiquidityGeneratorToken.calculateLiquidityFee(uint256)._amount (#1400) is not in mixedCase
Parameter LiquidityGeneratorToken.calculateCharityFee(uint256)._amount (#1408) is not in mixedCase
Variable LiquidityGeneratorToken._taxFee (#940) is not in mixedCase
Variable LiquidityGeneratorToken._liquidityFee (#943) is not in mixedCase
Variable LiquidityGeneratorToken._charityFee (#946) is not in mixedCase
Variable LiquidityGeneratorToken._charityAddress (#951) is not in mixedCase
Follow the Solidity naming convention.

Additional information: link

Variable IUniswapV2Router01.addLiquidity(address,address,uint256,uint256,uint256,uint256,address,uint256).amountADesired (#646) is too similar to IUniswapV2Router01.addLiquidity(address,address,uint256,uint256,uint256,uint256,address,uint256).amountBDesired (#647)
Variable LiquidityGeneratorToken._charityAddress (#951) is too similar to LiquidityGeneratorToken.constructor(string,string,uint256,address,address,uint16,uint16,uint16,address,uint256).charityAddress_ (#977)
Variable LiquidityGeneratorToken._transferBothExcluded(address,address,uint256).rTransferAmount (#1217) is too similar to LiquidityGeneratorToken._getTValues(uint256).tTransferAmount (#1324-1326)
Variable LiquidityGeneratorToken._transferToExcluded(address,address,uint256).rTransferAmount (#1600) is too similar to LiquidityGeneratorToken._getValues(uint256).tTransferAmount (#1288)
Variable LiquidityGeneratorToken._getRValues(uint256,uint256,uint256,uint256,uint256).rTransferAmount (#1349-1351) is too similar to LiquidityGeneratorToken._getTValues(uint256).tTransferAmount (#1324-1326)
Variable LiquidityGeneratorToken._getValues(uint256).rTransferAmount (#1293) is too similar to LiquidityGeneratorToken._getTValues(uint256).tTransferAmount (#1324-1326)
Variable LiquidityGeneratorToken._transferBothExcluded(address,address,uint256).rTransferAmount (#1217) is too similar to LiquidityGeneratorToken._transferToExcluded(address,address,uint256).tTransferAmount (#1602)
Variable LiquidityGeneratorToken.reflectionFromToken(uint256,bool).rTransferAmount (#1169) is too similar to LiquidityGeneratorToken._getValues(uint256).tTransferAmount (#1288)
Variable LiquidityGeneratorToken._transferBothExcluded(address,address,uint256).rTransferAmount (#1217) is too similar to LiquidityGeneratorToken._transferBothExcluded(address,address,uint256).tTransferAmount (#1219)
Variable LiquidityGeneratorToken._getRValues(uint256,uint256,uint256,uint256,uint256).rTransferAmount (#1349-1351) is too similar to LiquidityGeneratorToken._transferToExcluded(address,address,uint256).tTransferAmount (#1602)
Variable LiquidityGeneratorToken._getValues(uint256).rTransferAmount (#1293) is too similar to LiquidityGeneratorToken._transferToExcluded(address,address,uint256).tTransferAmount (#1602)
Variable LiquidityGeneratorToken._transferToExcluded(address,address,uint256).rTransferAmount (#1600) is too similar to LiquidityGeneratorToken._getTValues(uint256).tTransferAmount (#1324-1326)
Variable LiquidityGeneratorToken._transferBothExcluded(address,address,uint256).rTransferAmount (#1217) is too similar to LiquidityGeneratorToken._getValues(uint256).tTransferAmount (#1288)
Variable LiquidityGeneratorToken._getRValues(uint256,uint256,uint256,uint256,uint256).rTransferAmount (#1349-1351) is too similar to LiquidityGeneratorToken._transferBothExcluded(address,address,uint256).tTransferAmount (#1219)
Variable LiquidityGeneratorToken._getValues(uint256).rTransferAmount (#1293) is too similar to LiquidityGeneratorToken._transferBothExcluded(address,address,uint256).tTransferAmount (#1219)
Variable LiquidityGeneratorToken._getRValues(uint256,uint256,uint256,uint256,uint256).rTransferAmount (#1349-1351) is too similar to LiquidityGeneratorToken._getValues(uint256).tTransferAmount (#1288)
Variable LiquidityGeneratorToken._getValues(uint256).rTransferAmount (#1293) is too similar to LiquidityGeneratorToken._getValues(uint256).tTransferAmount (#1288)
Variable LiquidityGeneratorToken._transferToExcluded(address,address,uint256).rTransferAmount (#1600) is too similar to LiquidityGeneratorToken._transferToExcluded(address,address,uint256).tTransferAmount (#1602)
Variable LiquidityGeneratorToken._charityFee (#946) is too similar to LiquidityGeneratorToken._getTValues(uint256).tCharityFee (#1323)
Variable LiquidityGeneratorToken._transferToExcluded(address,address,uint256).rTransferAmount (#1600) is too similar to LiquidityGeneratorToken._transferFromExcluded(address,address,uint256).tTransferAmount (#1625)
Variable LiquidityGeneratorToken._transferFromExcluded(address,address,uint256).rTransferAmount (#1623) is too similar to LiquidityGeneratorToken._transferStandard(address,address,uint256).tTransferAmount (#1580)
Variable LiquidityGeneratorToken._transferFromExcluded(address,address,uint256).rTransferAmount (#1623) is too similar to LiquidityGeneratorToken._transferFromExcluded(address,address,uint256).tTransferAmount (#1625)
Variable LiquidityGeneratorToken.reflectionFromToken(uint256,bool).rTransferAmount (#1169) is too similar to LiquidityGeneratorToken._getTValues(uint256).tTransferAmount (#1324-1326)
Variable LiquidityGeneratorToken._transferStandard(address,address,uint256).rTransferAmount (#1578) is too similar to LiquidityGeneratorToken._transferFromExcluded(address,address,uint256).tTransferAmount (#1625)
Variable LiquidityGeneratorToken.reflectionFromToken(uint256,bool).rTransferAmount (#1169) is too similar to LiquidityGeneratorToken._transferToExcluded(address,address,uint256).tTransferAmount (#1602)
Variable LiquidityGeneratorToken._transferBothExcluded(address,address,uint256).rTransferAmount (#1217) is too similar to LiquidityGeneratorToken._transferStandard(address,address,uint256).tTransferAmount (#1580)
Variable LiquidityGeneratorToken._transferBothExcluded(address,address,uint256).rTransferAmount (#1217) is too similar to LiquidityGeneratorToken._transferFromExcluded(address,address,uint256).tTransferAmount (#1625)
Variable LiquidityGeneratorToken._transferFromExcluded(address,address,uint256).rTransferAmount (#1623) is too similar to LiquidityGeneratorToken._transferToExcluded(address,address,uint256).tTransferAmount (#1602)
Variable LiquidityGeneratorToken._transferStandard(address,address,uint256).rTransferAmount (#1578) is too similar to LiquidityGeneratorToken._getTValues(uint256).tTransferAmount (#1324-1326)
Variable LiquidityGeneratorToken._transferStandard(address,address,uint256).rTransferAmount (#1578) is too similar to LiquidityGeneratorToken._transferToExcluded(address,address,uint256).tTransferAmount (#1602)
Variable LiquidityGeneratorToken._transferFromExcluded(address,address,uint256).rTransferAmount (#1623) is too similar to LiquidityGeneratorToken._getTValues(uint256).tTransferAmount (#1324-1326)
Variable LiquidityGeneratorToken._getRValues(uint256,uint256,uint256,uint256,uint256).rTransferAmount (#1349-1351) is too similar to LiquidityGeneratorToken._transferStandard(address,address,uint256).tTransferAmount (#1580)
Variable LiquidityGeneratorToken._getRValues(uint256,uint256,uint256,uint256,uint256).rTransferAmount (#1349-1351) is too similar to LiquidityGeneratorToken._transferFromExcluded(address,address,uint256).tTransferAmount (#1625)
Variable LiquidityGeneratorToken.reflectionFromToken(uint256,bool).rTransferAmount (#1169) is too similar to LiquidityGeneratorToken._transferBothExcluded(address,address,uint256).tTransferAmount (#1219)
Variable LiquidityGeneratorToken._transferToExcluded(address,address,uint256).rTransferAmount (#1600) is too similar to LiquidityGeneratorToken._transferBothExcluded(address,address,uint256).tTransferAmount (#1219)
Variable LiquidityGeneratorToken._transferFromExcluded(address,address,uint256).rTransferAmount (#1623) is too similar to LiquidityGeneratorToken._transferBothExcluded(address,address,uint256).tTransferAmount (#1219)
Variable LiquidityGeneratorToken._transferStandard(address,address,uint256).rTransferAmount (#1578) is too similar to LiquidityGeneratorToken._transferBothExcluded(address,address,uint256).tTransferAmount (#1219)
Variable LiquidityGeneratorToken._transferFromExcluded(address,address,uint256).rTransferAmount (#1623) is too similar to LiquidityGeneratorToken._getValues(uint256).tTransferAmount (#1288)
Variable LiquidityGeneratorToken.reflectionFromToken(uint256,bool).rTransferAmount (#1169) is too similar to LiquidityGeneratorToken._transferStandard(address,address,uint256).tTransferAmount (#1580)
Variable LiquidityGeneratorToken._transferStandard(address,address,uint256).rTransferAmount (#1578) is too similar to LiquidityGeneratorToken._getValues(uint256).tTransferAmount (#1288)
Variable LiquidityGeneratorToken.reflectionFromToken(uint256,bool).rTransferAmount (#1169) is too similar to LiquidityGeneratorToken._transferFromExcluded(address,address,uint256).tTransferAmount (#1625)
Variable LiquidityGeneratorToken._transferToExcluded(address,address,uint256).rTransferAmount (#1600) is too similar to LiquidityGeneratorToken._transferStandard(address,address,uint256).tTransferAmount (#1580)
Variable LiquidityGeneratorToken._getValues(uint256).rTransferAmount (#1293) is too similar to LiquidityGeneratorToken._transferStandard(address,address,uint256).tTransferAmount (#1580)
Variable LiquidityGeneratorToken._getValues(uint256).rTransferAmount (#1293) is too similar to LiquidityGeneratorToken._transferFromExcluded(address,address,uint256).tTransferAmount (#1625)
Variable LiquidityGeneratorToken._transferStandard(address,address,uint256).rTransferAmount (#1578) is too similar to LiquidityGeneratorToken._transferStandard(address,address,uint256).tTransferAmount (#1580)
Prevent variables from having similar names.

Additional information: link

renounceOwnership() should be declared external:
- Ownable.renounceOwnership() (#165-167)
transferOwnership(address) should be declared external:
- Ownable.transferOwnership(address) (#173-176)
name() should be declared external:
- LiquidityGeneratorToken.name() (#1045-1047)
symbol() should be declared external:
- LiquidityGeneratorToken.symbol() (#1049-1051)
decimals() should be declared external:
- LiquidityGeneratorToken.decimals() (#1053-1055)
totalSupply() should be declared external:
- LiquidityGeneratorToken.totalSupply() (#1057-1059)
transfer(address,uint256) should be declared external:
- LiquidityGeneratorToken.transfer(address,uint256) (#1066-1073)
allowance(address,address) should be declared external:
- LiquidityGeneratorToken.allowance(address,address) (#1075-1082)
approve(address,uint256) should be declared external:
- LiquidityGeneratorToken.approve(address,uint256) (#1084-1091)
transferFrom(address,address,uint256) should be declared external:
- LiquidityGeneratorToken.transferFrom(address,address,uint256) (#1093-1108)
increaseAllowance(address,uint256) should be declared external:
- LiquidityGeneratorToken.increaseAllowance(address,uint256) (#1110-1121)
decreaseAllowance(address,uint256) should be declared external:
- LiquidityGeneratorToken.decreaseAllowance(address,uint256) (#1123-1137)
isExcludedFromReward(address) should be declared external:
- LiquidityGeneratorToken.isExcludedFromReward(address) (#1139-1141)
totalFees() should be declared external:
- LiquidityGeneratorToken.totalFees() (#1143-1145)
deliver(uint256) should be declared external:
- LiquidityGeneratorToken.deliver(uint256) (#1147-1157)
reflectionFromToken(uint256,bool) should be declared external:
- LiquidityGeneratorToken.reflectionFromToken(uint256,bool) (#1159-1172)
excludeFromReward(address) should be declared external:
- LiquidityGeneratorToken.excludeFromReward(address) (#1187-1195)
excludeFromFee(address) should be declared external:
- LiquidityGeneratorToken.excludeFromFee(address) (#1234-1236)
includeInFee(address) should be declared external:
- LiquidityGeneratorToken.includeInFee(address) (#1238-1240)
setSwapAndLiquifyEnabled(bool) should be declared external:
- LiquidityGeneratorToken.setSwapAndLiquifyEnabled(bool) (#1261-1264)
isExcludedFromFee(address) should be declared external:
- LiquidityGeneratorToken.isExcludedFromFee(address) (#1435-1437)
Use the external attribute for functions never called from the contract.

Additional information: link

Holders:


Token seems to be untradeable: there is no PancakeSwap trading pair and no trading volumes. Ignore for presale.


Number of Binance Smart Chain (BSC) token holders is less than 100. Token is either dead or inactive.


Telegram account has relatively few subscribers


Twitter account has relatively few followers


Twitter account has few posts


Unable to find Blog account (Reddit or Medium)


Unable to find Youtube account


Unable to find Discord account

Search:


BscScan page for the token does not contain additional info: website, socials, description, etc.

Additional information: link


Unable to verify token contract address on the website


Unable to find audit link on the website


Unable to find whitepaper link on the website


Unable to find Twitter link on the website


Unable to find token on CoinGecko

Additional information: link


Unable to find token on CoinMarketCap

Additional information: link


Token is not listed at Mobula.Finance

Additional information: link


Young tokens have high risks of scam / price dump / death


Young tokens have high risks of scam / price dump / death


Young tokens have high risks of scam / price dump / death


Token has no active CoinGecko listing / rank


Token has no active CoinMarketCap listing / rank

Anti-Scam Checks

Price for PBW

News for PBW