MSI [Metaverse Solomon lslands] Token

Reentrancy in LiquidityGeneratorToken._transfer(address,address,uint256) (#990-1034):
External calls:
- swapAndLiquify(contractTokenBalance) (#1021)
- uniswapV2Router.addLiquidityETH{value: ethAmount}(address(this),tokenAmount,0,0,dead,block.timestamp) (#1082-1089)
- uniswapV2Router.swapExactTokensForETHSupportingFeeOnTransferTokens(tokenAmount,0,path,address(this),block.timestamp) (#1068-1074)
External calls sending eth:
- swapAndLiquify(contractTokenBalance) (#1021)
- uniswapV2Router.addLiquidityETH{value: ethAmount}(address(this),tokenAmount,0,0,dead,block.timestamp) (#1082-1089)
State variables written after the call(s):
- _tokenTransfer(from,to,amount,takeFee) (#1033)
- _rOwned[address(this)] = _rOwned[address(this)].add(rLiquidity) (#946)
- _rOwned[sender] = _rOwned[sender].sub(rAmount) (#1115)
- _rOwned[sender] = _rOwned[sender].sub(rAmount) (#1124)
- _rOwned[sender] = _rOwned[sender].sub(rAmount) (#859)
- _rOwned[sender] = _rOwned[sender].sub(rAmount) (#1135)
- _rOwned[recipient] = _rOwned[recipient].add(rTransferAmount) (#1116)
- _rOwned[recipient] = _rOwned[recipient].add(rTransferAmount) (#1126)
- _rOwned[recipient] = _rOwned[recipient].add(rTransferAmount) (#1136)
- _rOwned[recipient] = _rOwned[recipient].add(rTransferAmount) (#861)
- _tokenTransfer(from,to,amount,takeFee) (#1033)
- _rTotal = _rTotal.sub(rFee) (#901)
- _tokenTransfer(from,to,amount,takeFee) (#1033)
- _tOwned[address(this)] = _tOwned[address(this)].add(tLiquidity) (#948)
- _tOwned[sender] = _tOwned[sender].sub(tAmount) (#858)
- _tOwned[sender] = _tOwned[sender].sub(tAmount) (#1134)
- _tOwned[recipient] = _tOwned[recipient].add(tTransferAmount) (#1125)
- _tOwned[recipient] = _tOwned[recipient].add(tTransferAmount) (#860)
Apply the check-effects-interactions pattern.

Additional information: link

LiquidityGeneratorToken._isExcluded (#697) is never initialized. It is used in:
- LiquidityGeneratorToken.balanceOf(address) (#786-789)
- LiquidityGeneratorToken.isExcludedFromReward(address) (#821-823)
- LiquidityGeneratorToken.deliver(uint256) (#829-836)
- LiquidityGeneratorToken._takeLiquidity(uint256) (#943-949)
- LiquidityGeneratorToken._tokenTransfer(address,address,uint256,bool) (#1093-1111)
LiquidityGeneratorToken._excluded (#698) is never initialized. It is used in:
- LiquidityGeneratorToken._getCurrentSupply() (#931-941)
Initialize all the variables. If a variable is meant to be initialized to zero, explicitly set it to zero to improve code readability.

Additional information: link

Unable to find manual contract audit (e.g. Certik, PeckShield, Solidity...)

LiquidityGeneratorToken.setTaxFeePercent(uint256) (#875-878) contains a tautology or contradiction:
- require(bool,string)(taxFee >= 0 && taxFee <= maxTaxFee,taxFee out of range) (#876)
LiquidityGeneratorToken.setLiquidityFeePercent(uint256) (#880-883) contains a tautology or contradiction:
- require(bool,string)(liquidityFee >= 0 && liquidityFee <= maxLiqFee,liquidityFee out of range) (#881)
Fix the incorrect comparison by changing the value type or the comparison.

Additional information: link

Contract ownership is not renounced (belongs to a wallet)

LiquidityGeneratorToken.addLiquidity(uint256,uint256) (#1077-1090) ignores return value by uniswapV2Router.addLiquidityETH{value: ethAmount}(address(this),tokenAmount,0,0,dead,block.timestamp) (#1082-1089)
Ensure that all the return values of the function calls are used.

Additional information: link

LiquidityGeneratorToken.constructor(address,string,string,uint8,uint256,uint8,uint8,uint256,uint256,uint256).name (#738) shadows:
- LiquidityGeneratorToken.name() (#770-772) (function)
LiquidityGeneratorToken.constructor(address,string,string,uint8,uint256,uint8,uint8,uint256,uint256,uint256).symbol (#738) shadows:
- LiquidityGeneratorToken.symbol() (#774-776) (function)
LiquidityGeneratorToken.allowance(address,address).owner (#796) shadows:
- Ownable.owner() (#413-415) (function)
LiquidityGeneratorToken._approve(address,address,uint256).owner (#982) shadows:
- Ownable.owner() (#413-415) (function)
Rename the local variables that shadow another component.

Additional information: link

LiquidityGeneratorToken.setTaxFeePercent(uint256) (#875-878) should emit an event for:
- _taxFee = taxFee (#877)
LiquidityGeneratorToken.setLiquidityFeePercent(uint256) (#880-883) should emit an event for:
- _liquidityFee = liquidityFee (#882)
LiquidityGeneratorToken.setMaxTxPercent(uint256) (#885-890) should emit an event for:
- _maxTxAmount = _tTotal.mul(maxTxPercent).div(10 ** 2) (#887-889)
Emit an event for critical parameter changes.

Additional information: link

Reentrancy in LiquidityGeneratorToken._transfer(address,address,uint256) (#990-1034):
External calls:
- swapAndLiquify(contractTokenBalance) (#1021)
- uniswapV2Router.addLiquidityETH{value: ethAmount}(address(this),tokenAmount,0,0,dead,block.timestamp) (#1082-1089)
- uniswapV2Router.swapExactTokensForETHSupportingFeeOnTransferTokens(tokenAmount,0,path,address(this),block.timestamp) (#1068-1074)
External calls sending eth:
- swapAndLiquify(contractTokenBalance) (#1021)
- uniswapV2Router.addLiquidityETH{value: ethAmount}(address(this),tokenAmount,0,0,dead,block.timestamp) (#1082-1089)
State variables written after the call(s):
- _tokenTransfer(from,to,amount,takeFee) (#1033)
- _liquidityFee = _previousLiquidityFee (#975)
- _liquidityFee = 0 (#970)
- _tokenTransfer(from,to,amount,takeFee) (#1033)
- _previousLiquidityFee = _liquidityFee (#967)
- _tokenTransfer(from,to,amount,takeFee) (#1033)
- _previousTaxFee = _taxFee (#966)
- _tokenTransfer(from,to,amount,takeFee) (#1033)
- _tFeeTotal = _tFeeTotal.add(tFee) (#902)
- _tokenTransfer(from,to,amount,takeFee) (#1033)
- _taxFee = _previousTaxFee (#974)
- _taxFee = 0 (#969)
Reentrancy in LiquidityGeneratorToken.constructor(address,string,string,uint8,uint256,uint8,uint8,uint256,uint256,uint256) (#738-768):
External calls:
- uniswapV2Pair = IUniswapV2Factory(_uniswapV2Router.factory()).createPair(address(this),_uniswapV2Router.WETH()) (#757-758)
State variables written after the call(s):
- _isExcludedFromFee[owner()] = true (#764)
- _isExcludedFromFee[address(this)] = true (#765)
- uniswapV2Router = _uniswapV2Router (#761)
Reentrancy in LiquidityGeneratorToken.swapAndLiquify(uint256) (#1036-1057):
External calls:
- swapTokensForEth(half) (#1048)
- uniswapV2Router.swapExactTokensForETHSupportingFeeOnTransferTokens(tokenAmount,0,path,address(this),block.timestamp) (#1068-1074)
- addLiquidity(otherHalf,newBalance) (#1054)
- uniswapV2Router.addLiquidityETH{value: ethAmount}(address(this),tokenAmount,0,0,dead,block.timestamp) (#1082-1089)
External calls sending eth:
- addLiquidity(otherHalf,newBalance) (#1054)
- uniswapV2Router.addLiquidityETH{value: ethAmount}(address(this),tokenAmount,0,0,dead,block.timestamp) (#1082-1089)
State variables written after the call(s):
- addLiquidity(otherHalf,newBalance) (#1054)
- _allowances[owner][spender] = amount (#986)
Reentrancy in LiquidityGeneratorToken.transferFrom(address,address,uint256) (#805-809):
External calls:
- _transfer(sender,recipient,amount) (#806)
- uniswapV2Router.addLiquidityETH{value: ethAmount}(address(this),tokenAmount,0,0,dead,block.timestamp) (#1082-1089)
- uniswapV2Router.swapExactTokensForETHSupportingFeeOnTransferTokens(tokenAmount,0,path,address(this),block.timestamp) (#1068-1074)
External calls sending eth:
- _transfer(sender,recipient,amount) (#806)
- uniswapV2Router.addLiquidityETH{value: ethAmount}(address(this),tokenAmount,0,0,dead,block.timestamp) (#1082-1089)
State variables written after the call(s):
- _approve(sender,_msgSender(),_allowances[sender][_msgSender()].sub(amount,ERC20: transfer amount exceeds allowance)) (#807)
- _allowances[owner][spender] = amount (#986)
Apply the check-effects-interactions pattern.

Additional information: link

Reentrancy in LiquidityGeneratorToken._transfer(address,address,uint256) (#990-1034):
External calls:
- swapAndLiquify(contractTokenBalance) (#1021)
- uniswapV2Router.addLiquidityETH{value: ethAmount}(address(this),tokenAmount,0,0,dead,block.timestamp) (#1082-1089)
- uniswapV2Router.swapExactTokensForETHSupportingFeeOnTransferTokens(tokenAmount,0,path,address(this),block.timestamp) (#1068-1074)
External calls sending eth:
- swapAndLiquify(contractTokenBalance) (#1021)
- uniswapV2Router.addLiquidityETH{value: ethAmount}(address(this),tokenAmount,0,0,dead,block.timestamp) (#1082-1089)
Event emitted after the call(s):
- Transfer(sender,recipient,tTransferAmount) (#1119)
- _tokenTransfer(from,to,amount,takeFee) (#1033)
- Transfer(sender,recipient,tTransferAmount) (#1139)
- _tokenTransfer(from,to,amount,takeFee) (#1033)
- Transfer(sender,recipient,tTransferAmount) (#1129)
- _tokenTransfer(from,to,amount,takeFee) (#1033)
- Transfer(sender,recipient,tTransferAmount) (#864)
- _tokenTransfer(from,to,amount,takeFee) (#1033)
Reentrancy in LiquidityGeneratorToken.constructor(address,string,string,uint8,uint256,uint8,uint8,uint256,uint256,uint256) (#738-768):
External calls:
- uniswapV2Pair = IUniswapV2Factory(_uniswapV2Router.factory()).createPair(address(this),_uniswapV2Router.WETH()) (#757-758)
Event emitted after the call(s):
- Transfer(address(0),tokenOwner,_tTotal) (#767)
Reentrancy in LiquidityGeneratorToken.swapAndLiquify(uint256) (#1036-1057):
External calls:
- swapTokensForEth(half) (#1048)
- uniswapV2Router.swapExactTokensForETHSupportingFeeOnTransferTokens(tokenAmount,0,path,address(this),block.timestamp) (#1068-1074)
- addLiquidity(otherHalf,newBalance) (#1054)
- uniswapV2Router.addLiquidityETH{value: ethAmount}(address(this),tokenAmount,0,0,dead,block.timestamp) (#1082-1089)
External calls sending eth:
- addLiquidity(otherHalf,newBalance) (#1054)
- uniswapV2Router.addLiquidityETH{value: ethAmount}(address(this),tokenAmount,0,0,dead,block.timestamp) (#1082-1089)
Event emitted after the call(s):
- Approval(owner,spender,amount) (#987)
- addLiquidity(otherHalf,newBalance) (#1054)
- SwapAndLiquify(half,newBalance,otherHalf) (#1056)
Reentrancy in LiquidityGeneratorToken.transferFrom(address,address,uint256) (#805-809):
External calls:
- _transfer(sender,recipient,amount) (#806)
- uniswapV2Router.addLiquidityETH{value: ethAmount}(address(this),tokenAmount,0,0,dead,block.timestamp) (#1082-1089)
- uniswapV2Router.swapExactTokensForETHSupportingFeeOnTransferTokens(tokenAmount,0,path,address(this),block.timestamp) (#1068-1074)
External calls sending eth:
- _transfer(sender,recipient,amount) (#806)
- uniswapV2Router.addLiquidityETH{value: ethAmount}(address(this),tokenAmount,0,0,dead,block.timestamp) (#1082-1089)
Event emitted after the call(s):
- Approval(owner,spender,amount) (#987)
- _approve(sender,_msgSender(),_allowances[sender][_msgSender()].sub(amount,ERC20: transfer amount exceeds allowance)) (#807)
Apply the check-effects-interactions pattern.

Additional information: link

Ownable.unlock() (#460-465) uses timestamp for comparisons
Dangerous comparisons:
- require(bool,string)(now > _lockTime,Contract is locked until 7 days) (#462)
Avoid relying on block.timestamp.

Additional information: link

Address.isContract(address) (#265-274) uses assembly
- INLINE ASM (#272)
Address._functionCallWithValue(address,bytes,uint256,string) (#358-379) uses assembly
- INLINE ASM (#371-374)
Do not use evm assembly.

Additional information: link

Address._functionCallWithValue(address,bytes,uint256,string) (#358-379) is never used and should be removed
Address.functionCall(address,bytes) (#318-320) is never used and should be removed
Address.functionCall(address,bytes,string) (#328-330) is never used and should be removed
Address.functionCallWithValue(address,bytes,uint256) (#343-345) is never used and should be removed
Address.functionCallWithValue(address,bytes,uint256,string) (#353-356) is never used and should be removed
Address.isContract(address) (#265-274) is never used and should be removed
Address.sendValue(address,uint256) (#292-298) is never used and should be removed
Context._msgData() (#237-240) is never used and should be removed
SafeMath.mod(uint256,uint256) (#210-212) is never used and should be removed
SafeMath.mod(uint256,uint256,string) (#226-229) is never used and should be removed
Remove unused functions.

Additional information: link

LiquidityGeneratorToken._previousTaxFee (#710) is set pre-construction with a non-constant function or state variable:
- _taxFee
LiquidityGeneratorToken._previousLiquidityFee (#713) is set pre-construction with a non-constant function or state variable:
- _liquidityFee
Remove any initialization of state variables via non-constant state variables or function calls. If variables must be set upon contract deployment, locate initialization in the constructor instead.

Additional information: link

Low level call in Address.sendValue(address,uint256) (#292-298):
- (success) = recipient.call{value: amount}() (#296)
Low level call in Address._functionCallWithValue(address,bytes,uint256,string) (#358-379):
- (success,returndata) = target.call{value: weiValue}(data) (#362)
Avoid low-level calls. Check the call success. If the call is meant for a contract, check for code existence

Additional information: link

Function IUniswapV2Pair.DOMAIN_SEPARATOR() (#504) is not in mixedCase
Function IUniswapV2Pair.PERMIT_TYPEHASH() (#505) is not in mixedCase
Function IUniswapV2Pair.MINIMUM_LIQUIDITY() (#522) is not in mixedCase
Function IUniswapV2Router01.WETH() (#544) is not in mixedCase
Parameter LiquidityGeneratorToken.setSwapAndLiquifyEnabled(bool)._enabled (#892) is not in mixedCase
Parameter LiquidityGeneratorToken.calculateTaxFee(uint256)._amount (#951) is not in mixedCase
Parameter LiquidityGeneratorToken.calculateLiquidityFee(uint256)._amount (#957) is not in mixedCase
Variable LiquidityGeneratorToken._tTotal (#701) is not in mixedCase
Variable LiquidityGeneratorToken._name (#705) is not in mixedCase
Variable LiquidityGeneratorToken._symbol (#706) is not in mixedCase
Variable LiquidityGeneratorToken._taxFee (#709) is not in mixedCase
Variable LiquidityGeneratorToken._liquidityFee (#712) is not in mixedCase
Variable LiquidityGeneratorToken._maxTxAmount (#721) is not in mixedCase
Follow the Solidity naming convention.

Additional information: link

Redundant expression "this (#238)" inContext (#232-241)
Remove redundant statements if they congest code but offer no value.

Additional information: link

Variable IUniswapV2Router01.addLiquidity(address,address,uint256,uint256,uint256,uint256,address,uint256).amountADesired (#549) is too similar to IUniswapV2Router01.addLiquidity(address,address,uint256,uint256,uint256,uint256,address,uint256).amountBDesired (#550)
Variable LiquidityGeneratorToken._transferBothExcluded(address,address,uint256).rTransferAmount (#857) is too similar to LiquidityGeneratorToken._getTValues(uint256).tTransferAmount (#914)
Variable LiquidityGeneratorToken._transferBothExcluded(address,address,uint256).rTransferAmount (#857) is too similar to LiquidityGeneratorToken._transferStandard(address,address,uint256).tTransferAmount (#1114)
Variable LiquidityGeneratorToken._transferToExcluded(address,address,uint256).rTransferAmount (#1123) is too similar to LiquidityGeneratorToken._getTValues(uint256).tTransferAmount (#914)
Variable LiquidityGeneratorToken._getRValues(uint256,uint256,uint256,uint256).rTransferAmount (#922) is too similar to LiquidityGeneratorToken._transferFromExcluded(address,address,uint256).tTransferAmount (#1133)
Variable LiquidityGeneratorToken._transferToExcluded(address,address,uint256).rTransferAmount (#1123) is too similar to LiquidityGeneratorToken._transferStandard(address,address,uint256).tTransferAmount (#1114)
Variable LiquidityGeneratorToken._transferToExcluded(address,address,uint256).rTransferAmount (#1123) is too similar to LiquidityGeneratorToken._transferBothExcluded(address,address,uint256).tTransferAmount (#857)
Variable LiquidityGeneratorToken._getValues(uint256).rTransferAmount (#907) is too similar to LiquidityGeneratorToken._getTValues(uint256).tTransferAmount (#914)
Variable LiquidityGeneratorToken._getRValues(uint256,uint256,uint256,uint256).rTransferAmount (#922) is too similar to LiquidityGeneratorToken._getValues(uint256).tTransferAmount (#906)
Variable LiquidityGeneratorToken._transferBothExcluded(address,address,uint256).rTransferAmount (#857) is too similar to LiquidityGeneratorToken._transferFromExcluded(address,address,uint256).tTransferAmount (#1133)
Variable LiquidityGeneratorToken._transferToExcluded(address,address,uint256).rTransferAmount (#1123) is too similar to LiquidityGeneratorToken._transferFromExcluded(address,address,uint256).tTransferAmount (#1133)
Variable LiquidityGeneratorToken._getRValues(uint256,uint256,uint256,uint256).rTransferAmount (#922) is too similar to LiquidityGeneratorToken._getTValues(uint256).tTransferAmount (#914)
Variable LiquidityGeneratorToken._getRValues(uint256,uint256,uint256,uint256).rTransferAmount (#922) is too similar to LiquidityGeneratorToken._transferStandard(address,address,uint256).tTransferAmount (#1114)
Variable LiquidityGeneratorToken._transferToExcluded(address,address,uint256).rTransferAmount (#1123) is too similar to LiquidityGeneratorToken._transferToExcluded(address,address,uint256).tTransferAmount (#1123)
Variable LiquidityGeneratorToken._transferStandard(address,address,uint256).rTransferAmount (#1114) is too similar to LiquidityGeneratorToken._getTValues(uint256).tTransferAmount (#914)
Variable LiquidityGeneratorToken._transferBothExcluded(address,address,uint256).rTransferAmount (#857) is too similar to LiquidityGeneratorToken._getValues(uint256).tTransferAmount (#906)
Variable LiquidityGeneratorToken._transferToExcluded(address,address,uint256).rTransferAmount (#1123) is too similar to LiquidityGeneratorToken._getValues(uint256).tTransferAmount (#906)
Variable LiquidityGeneratorToken._transferStandard(address,address,uint256).rTransferAmount (#1114) is too similar to LiquidityGeneratorToken._transferStandard(address,address,uint256).tTransferAmount (#1114)
Variable LiquidityGeneratorToken._transferStandard(address,address,uint256).rTransferAmount (#1114) is too similar to LiquidityGeneratorToken._transferBothExcluded(address,address,uint256).tTransferAmount (#857)
Variable LiquidityGeneratorToken._transferFromExcluded(address,address,uint256).rTransferAmount (#1133) is too similar to LiquidityGeneratorToken._getValues(uint256).tTransferAmount (#906)
Variable LiquidityGeneratorToken._getRValues(uint256,uint256,uint256,uint256).rTransferAmount (#922) is too similar to LiquidityGeneratorToken._transferToExcluded(address,address,uint256).tTransferAmount (#1123)
Variable LiquidityGeneratorToken.reflectionFromToken(uint256,bool).rTransferAmount (#844) is too similar to LiquidityGeneratorToken._transferFromExcluded(address,address,uint256).tTransferAmount (#1133)
Variable LiquidityGeneratorToken._getValues(uint256).rTransferAmount (#907) is too similar to LiquidityGeneratorToken._transferFromExcluded(address,address,uint256).tTransferAmount (#1133)
Variable LiquidityGeneratorToken._transferStandard(address,address,uint256).rTransferAmount (#1114) is too similar to LiquidityGeneratorToken._transferToExcluded(address,address,uint256).tTransferAmount (#1123)
Variable LiquidityGeneratorToken.reflectionFromToken(uint256,bool).rTransferAmount (#844) is too similar to LiquidityGeneratorToken._transferBothExcluded(address,address,uint256).tTransferAmount (#857)
Variable LiquidityGeneratorToken._getValues(uint256).rTransferAmount (#907) is too similar to LiquidityGeneratorToken._transferBothExcluded(address,address,uint256).tTransferAmount (#857)
Variable LiquidityGeneratorToken.reflectionFromToken(uint256,bool).rTransferAmount (#844) is too similar to LiquidityGeneratorToken._transferStandard(address,address,uint256).tTransferAmount (#1114)
Variable LiquidityGeneratorToken._getValues(uint256).rTransferAmount (#907) is too similar to LiquidityGeneratorToken._transferStandard(address,address,uint256).tTransferAmount (#1114)
Variable LiquidityGeneratorToken._transferFromExcluded(address,address,uint256).rTransferAmount (#1133) is too similar to LiquidityGeneratorToken._transferFromExcluded(address,address,uint256).tTransferAmount (#1133)
Variable LiquidityGeneratorToken.reflectionFromToken(uint256,bool).rTransferAmount (#844) is too similar to LiquidityGeneratorToken._transferToExcluded(address,address,uint256).tTransferAmount (#1123)
Variable LiquidityGeneratorToken._transferStandard(address,address,uint256).rTransferAmount (#1114) is too similar to LiquidityGeneratorToken._getValues(uint256).tTransferAmount (#906)
Variable LiquidityGeneratorToken._getValues(uint256).rTransferAmount (#907) is too similar to LiquidityGeneratorToken._transferToExcluded(address,address,uint256).tTransferAmount (#1123)
Variable LiquidityGeneratorToken.reflectionFromToken(uint256,bool).rTransferAmount (#844) is too similar to LiquidityGeneratorToken._getTValues(uint256).tTransferAmount (#914)
Variable LiquidityGeneratorToken._transferBothExcluded(address,address,uint256).rTransferAmount (#857) is too similar to LiquidityGeneratorToken._transferBothExcluded(address,address,uint256).tTransferAmount (#857)
Variable LiquidityGeneratorToken._transferFromExcluded(address,address,uint256).rTransferAmount (#1133) is too similar to LiquidityGeneratorToken._transferBothExcluded(address,address,uint256).tTransferAmount (#857)
Variable LiquidityGeneratorToken._transferFromExcluded(address,address,uint256).rTransferAmount (#1133) is too similar to LiquidityGeneratorToken._transferStandard(address,address,uint256).tTransferAmount (#1114)
Variable LiquidityGeneratorToken._transferBothExcluded(address,address,uint256).rTransferAmount (#857) is too similar to LiquidityGeneratorToken._transferToExcluded(address,address,uint256).tTransferAmount (#1123)
Variable LiquidityGeneratorToken.reflectionFromToken(uint256,bool).rTransferAmount (#844) is too similar to LiquidityGeneratorToken._getValues(uint256).tTransferAmount (#906)
Variable LiquidityGeneratorToken._getValues(uint256).rTransferAmount (#907) is too similar to LiquidityGeneratorToken._getValues(uint256).tTransferAmount (#906)
Variable LiquidityGeneratorToken._transferFromExcluded(address,address,uint256).rTransferAmount (#1133) is too similar to LiquidityGeneratorToken._transferToExcluded(address,address,uint256).tTransferAmount (#1123)
Variable LiquidityGeneratorToken._transferFromExcluded(address,address,uint256).rTransferAmount (#1133) is too similar to LiquidityGeneratorToken._getTValues(uint256).tTransferAmount (#914)
Variable LiquidityGeneratorToken._transferStandard(address,address,uint256).rTransferAmount (#1114) is too similar to LiquidityGeneratorToken._transferFromExcluded(address,address,uint256).tTransferAmount (#1133)
Variable LiquidityGeneratorToken._getRValues(uint256,uint256,uint256,uint256).rTransferAmount (#922) is too similar to LiquidityGeneratorToken._transferBothExcluded(address,address,uint256).tTransferAmount (#857)
Prevent variables from having similar names.

Additional information: link

LiquidityGeneratorToken.slitherConstructorVariables() (#682-1159) uses literals with too many digits:
- dead = 0x000000000000000000000000000000000000dEaD (#685)
Use: Ether suffix, Time suffix, or The scientific notation

Additional information: link

LiquidityGeneratorToken.dead (#685) should be constant
LiquidityGeneratorToken.mintedByDxsale (#704) should be constant
LiquidityGeneratorToken.router (#699) should be constant
Add the constant attributes to state variables that never change.

Additional information: link

renounceOwnership() should be declared external:
- Ownable.renounceOwnership() (#432-435)
transferOwnership(address) should be declared external:
- Ownable.transferOwnership(address) (#441-445)
geUnlockTime() should be declared external:
- Ownable.geUnlockTime() (#447-449)
lock(uint256) should be declared external:
- Ownable.lock(uint256) (#452-457)
unlock() should be declared external:
- Ownable.unlock() (#460-465)
name() should be declared external:
- LiquidityGeneratorToken.name() (#770-772)
symbol() should be declared external:
- LiquidityGeneratorToken.symbol() (#774-776)
decimals() should be declared external:
- LiquidityGeneratorToken.decimals() (#778-780)
totalSupply() should be declared external:
- LiquidityGeneratorToken.totalSupply() (#782-784)
transfer(address,uint256) should be declared external:
- LiquidityGeneratorToken.transfer(address,uint256) (#791-794)
allowance(address,address) should be declared external:
- LiquidityGeneratorToken.allowance(address,address) (#796-798)
approve(address,uint256) should be declared external:
- LiquidityGeneratorToken.approve(address,uint256) (#800-803)
transferFrom(address,address,uint256) should be declared external:
- LiquidityGeneratorToken.transferFrom(address,address,uint256) (#805-809)
increaseAllowance(address,uint256) should be declared external:
- LiquidityGeneratorToken.increaseAllowance(address,uint256) (#811-814)
decreaseAllowance(address,uint256) should be declared external:
- LiquidityGeneratorToken.decreaseAllowance(address,uint256) (#816-819)
isExcludedFromReward(address) should be declared external:
- LiquidityGeneratorToken.isExcludedFromReward(address) (#821-823)
totalFees() should be declared external:
- LiquidityGeneratorToken.totalFees() (#825-827)
deliver(uint256) should be declared external:
- LiquidityGeneratorToken.deliver(uint256) (#829-836)
reflectionFromToken(uint256,bool) should be declared external:
- LiquidityGeneratorToken.reflectionFromToken(uint256,bool) (#838-847)
excludeFromFee(address) should be declared external:
- LiquidityGeneratorToken.excludeFromFee(address) (#867-869)
includeInFee(address) should be declared external:
- LiquidityGeneratorToken.includeInFee(address) (#871-873)
setSwapAndLiquifyEnabled(bool) should be declared external:
- LiquidityGeneratorToken.setSwapAndLiquifyEnabled(bool) (#892-895)
isExcludedFromFee(address) should be declared external:
- LiquidityGeneratorToken.isExcludedFromFee(address) (#978-980)
disableFees() should be declared external:
- LiquidityGeneratorToken.disableFees() (#1142-1150)
enableFees() should be declared external:
- LiquidityGeneratorToken.enableFees() (#1152-1157)
Use the external attribute for functions never called from the contract.

Additional information: link

Token seems to be untradeable: there is no PancakeSwap trading pair and no trading volumes. Ignore for presale.

Number of Binance Smart Chain (BSC) token holders is low.

Unable to find token contract audit

Unable to find token on CoinGecko

Additional information: link

Unable to find token on CoinMarketCap

Additional information: link

Token is not listed at Mobula.Finance

Additional information: link

Unable to find audit link on the website

Unable to find whitepaper link on the website

Token has no active CoinGecko listing / rank

Token has no active CoinMarketCap listing / rank

Young tokens have high risks of price dump / death

Young tokens have high risks of price dump / death

Young tokens have high risks of price dump / death