Unable to find manual contract audit (e.g. Certik, PeckShield, Solidity...)
Reentrancy in MarshallRoganInu._transfer(address,address,uint256) (#1023-1067):
External calls:
- swapAndLiquify(contractTokenBalance) (#1054)
- uniswapV2Router.addLiquidityETH{value: ethAmount}(address(this),tokenAmount,0,0,owner(),block.timestamp) (#1115-1122)
- uniswapV2Router.swapExactTokensForETHSupportingFeeOnTransferTokens(tokenAmount,0,path,address(this),block.timestamp) (#1101-1107)
External calls sending eth:
- swapAndLiquify(contractTokenBalance) (#1054)
- uniswapV2Router.addLiquidityETH{value: ethAmount}(address(this),tokenAmount,0,0,owner(),block.timestamp) (#1115-1122)
State variables written after the call(s):
- _tokenTransfer(from,to,amount,takeFee) (#1066)
- _rOwned[address(this)] = _rOwned[address(this)].add(rLiquidity) (#979)
- _rOwned[sender] = _rOwned[sender].sub(rAmount) (#1148)
- _rOwned[sender] = _rOwned[sender].sub(rAmount) (#1157)
- _rOwned[sender] = _rOwned[sender].sub(rAmount) (#1168)
- _rOwned[sender] = _rOwned[sender].sub(rAmount) (#895)
- _rOwned[recipient] = _rOwned[recipient].add(rTransferAmount) (#1149)
- _rOwned[recipient] = _rOwned[recipient].add(rTransferAmount) (#1159)
- _rOwned[recipient] = _rOwned[recipient].add(rTransferAmount) (#1169)
- _rOwned[recipient] = _rOwned[recipient].add(rTransferAmount) (#897)
- _tokenTransfer(from,to,amount,takeFee) (#1066)
- _rTotal = _rTotal.sub(rFee) (#934)
- _tokenTransfer(from,to,amount,takeFee) (#1066)
- _tOwned[address(this)] = _tOwned[address(this)].add(tLiquidity) (#981)
- _tOwned[sender] = _tOwned[sender].sub(tAmount) (#894)
- _tOwned[sender] = _tOwned[sender].sub(tAmount) (#1167)
- _tOwned[recipient] = _tOwned[recipient].add(tTransferAmount) (#1158)
- _tOwned[recipient] = _tOwned[recipient].add(tTransferAmount) (#896)
Apply the check-effects-interactions pattern.
Additional information: link
Not a direct threat, but may indicate unreliable intentions of developer. Widespread names (e.g. Elon, King, Moon, Doge) are common among meme-tokens and scams. The allow to gain free hype and attract unexperienced investors.
MarshallRoganInu.setTaxFeePercent(uint256) (#911-913) should emit an event for:
- _taxFee = taxFee (#912)
MarshallRoganInu.setLiquidityFeePercent(uint256) (#915-917) should emit an event for:
- _liquidityFee = liquidityFee (#916)
MarshallRoganInu.setMaxTxPercent(uint256) (#919-923) should emit an event for:
- _maxTxAmount = _tTotal.mul(maxTxPercent).div(10 ** 2) (#920-922)
Emit an event for critical parameter changes.
Additional information: link
MarshallRoganInu.addLiquidity(uint256,uint256) (#1110-1123) ignores return value by uniswapV2Router.addLiquidityETH{value: ethAmount}(address(this),tokenAmount,0,0,owner(),block.timestamp) (#1115-1122)
Ensure that all the return values of the function calls are used.
Additional information: link
MarshallRoganInu.allowance(address,address).owner (#811) shadows:
- Ownable.owner() (#447-449) (function)
MarshallRoganInu._approve(address,address,uint256).owner (#1015) shadows:
- Ownable.owner() (#447-449) (function)
Rename the local variables that shadow another component.
Additional information: link
Reentrancy in MarshallRoganInu._transfer(address,address,uint256) (#1023-1067):
External calls:
- swapAndLiquify(contractTokenBalance) (#1054)
- uniswapV2Router.addLiquidityETH{value: ethAmount}(address(this),tokenAmount,0,0,owner(),block.timestamp) (#1115-1122)
- uniswapV2Router.swapExactTokensForETHSupportingFeeOnTransferTokens(tokenAmount,0,path,address(this),block.timestamp) (#1101-1107)
External calls sending eth:
- swapAndLiquify(contractTokenBalance) (#1054)
- uniswapV2Router.addLiquidityETH{value: ethAmount}(address(this),tokenAmount,0,0,owner(),block.timestamp) (#1115-1122)
State variables written after the call(s):
- _tokenTransfer(from,to,amount,takeFee) (#1066)
- _liquidityFee = _previousLiquidityFee (#1008)
- _liquidityFee = 0 (#1003)
- _tokenTransfer(from,to,amount,takeFee) (#1066)
- _previousLiquidityFee = _liquidityFee (#1000)
- _tokenTransfer(from,to,amount,takeFee) (#1066)
- _previousTaxFee = _taxFee (#999)
- _tokenTransfer(from,to,amount,takeFee) (#1066)
- _tFeeTotal = _tFeeTotal.add(tFee) (#935)
- _tokenTransfer(from,to,amount,takeFee) (#1066)
- _taxFee = _previousTaxFee (#1007)
- _taxFee = 0 (#1002)
Reentrancy in MarshallRoganInu.constructor() (#767-783):
External calls:
- uniswapV2Pair = IUniswapV2Factory(_uniswapV2Router.factory()).createPair(address(this),_uniswapV2Router.WETH()) (#772-773)
State variables written after the call(s):
- _isExcludedFromFee[owner()] = true (#779)
- _isExcludedFromFee[address(this)] = true (#780)
- uniswapV2Router = _uniswapV2Router (#776)
Reentrancy in MarshallRoganInu.swapAndLiquify(uint256) (#1069-1090):
External calls:
- swapTokensForEth(half) (#1081)
- uniswapV2Router.swapExactTokensForETHSupportingFeeOnTransferTokens(tokenAmount,0,path,address(this),block.timestamp) (#1101-1107)
- addLiquidity(otherHalf,newBalance) (#1087)
- uniswapV2Router.addLiquidityETH{value: ethAmount}(address(this),tokenAmount,0,0,owner(),block.timestamp) (#1115-1122)
External calls sending eth:
- addLiquidity(otherHalf,newBalance) (#1087)
- uniswapV2Router.addLiquidityETH{value: ethAmount}(address(this),tokenAmount,0,0,owner(),block.timestamp) (#1115-1122)
State variables written after the call(s):
- addLiquidity(otherHalf,newBalance) (#1087)
- _allowances[owner][spender] = amount (#1019)
Reentrancy in MarshallRoganInu.transferFrom(address,address,uint256) (#820-824):
External calls:
- _transfer(sender,recipient,amount) (#821)
- uniswapV2Router.addLiquidityETH{value: ethAmount}(address(this),tokenAmount,0,0,owner(),block.timestamp) (#1115-1122)
- uniswapV2Router.swapExactTokensForETHSupportingFeeOnTransferTokens(tokenAmount,0,path,address(this),block.timestamp) (#1101-1107)
External calls sending eth:
- _transfer(sender,recipient,amount) (#821)
- uniswapV2Router.addLiquidityETH{value: ethAmount}(address(this),tokenAmount,0,0,owner(),block.timestamp) (#1115-1122)
State variables written after the call(s):
- _approve(sender,_msgSender(),_allowances[sender][_msgSender()].sub(amount,ERC20: transfer amount exceeds allowance)) (#822)
- _allowances[owner][spender] = amount (#1019)
Apply the check-effects-interactions pattern.
Additional information: link
Reentrancy in MarshallRoganInu._transfer(address,address,uint256) (#1023-1067):
External calls:
- swapAndLiquify(contractTokenBalance) (#1054)
- uniswapV2Router.addLiquidityETH{value: ethAmount}(address(this),tokenAmount,0,0,owner(),block.timestamp) (#1115-1122)
- uniswapV2Router.swapExactTokensForETHSupportingFeeOnTransferTokens(tokenAmount,0,path,address(this),block.timestamp) (#1101-1107)
External calls sending eth:
- swapAndLiquify(contractTokenBalance) (#1054)
- uniswapV2Router.addLiquidityETH{value: ethAmount}(address(this),tokenAmount,0,0,owner(),block.timestamp) (#1115-1122)
Event emitted after the call(s):
- Transfer(sender,recipient,tTransferAmount) (#1152)
- _tokenTransfer(from,to,amount,takeFee) (#1066)
- Transfer(sender,recipient,tTransferAmount) (#1172)
- _tokenTransfer(from,to,amount,takeFee) (#1066)
- Transfer(sender,recipient,tTransferAmount) (#1162)
- _tokenTransfer(from,to,amount,takeFee) (#1066)
- Transfer(sender,recipient,tTransferAmount) (#900)
- _tokenTransfer(from,to,amount,takeFee) (#1066)
Reentrancy in MarshallRoganInu.constructor() (#767-783):
External calls:
- uniswapV2Pair = IUniswapV2Factory(_uniswapV2Router.factory()).createPair(address(this),_uniswapV2Router.WETH()) (#772-773)
Event emitted after the call(s):
- Transfer(address(0),_msgSender(),_tTotal) (#782)
Reentrancy in MarshallRoganInu.swapAndLiquify(uint256) (#1069-1090):
External calls:
- swapTokensForEth(half) (#1081)
- uniswapV2Router.swapExactTokensForETHSupportingFeeOnTransferTokens(tokenAmount,0,path,address(this),block.timestamp) (#1101-1107)
- addLiquidity(otherHalf,newBalance) (#1087)
- uniswapV2Router.addLiquidityETH{value: ethAmount}(address(this),tokenAmount,0,0,owner(),block.timestamp) (#1115-1122)
External calls sending eth:
- addLiquidity(otherHalf,newBalance) (#1087)
- uniswapV2Router.addLiquidityETH{value: ethAmount}(address(this),tokenAmount,0,0,owner(),block.timestamp) (#1115-1122)
Event emitted after the call(s):
- Approval(owner,spender,amount) (#1020)
- addLiquidity(otherHalf,newBalance) (#1087)
- SwapAndLiquify(half,newBalance,otherHalf) (#1089)
Reentrancy in MarshallRoganInu.transferFrom(address,address,uint256) (#820-824):
External calls:
- _transfer(sender,recipient,amount) (#821)
- uniswapV2Router.addLiquidityETH{value: ethAmount}(address(this),tokenAmount,0,0,owner(),block.timestamp) (#1115-1122)
- uniswapV2Router.swapExactTokensForETHSupportingFeeOnTransferTokens(tokenAmount,0,path,address(this),block.timestamp) (#1101-1107)
External calls sending eth:
- _transfer(sender,recipient,amount) (#821)
- uniswapV2Router.addLiquidityETH{value: ethAmount}(address(this),tokenAmount,0,0,owner(),block.timestamp) (#1115-1122)
Event emitted after the call(s):
- Approval(owner,spender,amount) (#1020)
- _approve(sender,_msgSender(),_allowances[sender][_msgSender()].sub(amount,ERC20: transfer amount exceeds allowance)) (#822)
Apply the check-effects-interactions pattern.
Additional information: link
Ownable.unlock() (#494-499) uses timestamp for comparisons
Dangerous comparisons:
- require(bool,string)(now > _lockTime,Contract is locked until 7 days) (#496)
Avoid relying on block.timestamp.
Additional information: link
Address.isContract(address) (#299-308) uses assembly
- INLINE ASM (#306)
Address._functionCallWithValue(address,bytes,uint256,string) (#392-413) uses assembly
- INLINE ASM (#405-408)
Do not use evm assembly.
Additional information: link
MarshallRoganInu.includeInReward(address) (#880-891) has costly operations inside a loop:
- _excluded.pop() (#887)
Use a local variable to hold the loop computation result.
Additional information: link
Address._functionCallWithValue(address,bytes,uint256,string) (#392-413) is never used and should be removed
Address.functionCall(address,bytes) (#352-354) is never used and should be removed
Address.functionCall(address,bytes,string) (#362-364) is never used and should be removed
Address.functionCallWithValue(address,bytes,uint256) (#377-379) is never used and should be removed
Address.functionCallWithValue(address,bytes,uint256,string) (#387-390) is never used and should be removed
Address.isContract(address) (#299-308) is never used and should be removed
Address.sendValue(address,uint256) (#326-332) is never used and should be removed
Context._msgData() (#271-274) is never used and should be removed
SafeMath.mod(uint256,uint256) (#244-246) is never used and should be removed
SafeMath.mod(uint256,uint256,string) (#260-263) is never used and should be removed
Remove unused functions.
Additional information: link
MarshallRoganInu._rTotal (#731) is set pre-construction with a non-constant function or state variable:
- (MAX - (MAX % _tTotal))
MarshallRoganInu._previousTaxFee (#739) is set pre-construction with a non-constant function or state variable:
- _taxFee
MarshallRoganInu._previousLiquidityFee (#742) is set pre-construction with a non-constant function or state variable:
- _liquidityFee
Remove any initialization of state variables via non-constant state variables or function calls. If variables must be set upon contract deployment, locate initialization in the constructor instead.
Additional information: link
Low level call in Address.sendValue(address,uint256) (#326-332):
- (success) = recipient.call{value: amount}() (#330)
Low level call in Address._functionCallWithValue(address,bytes,uint256,string) (#392-413):
- (success,returndata) = target.call{value: weiValue}(data) (#396)
Avoid low-level calls. Check the call success. If the call is meant for a contract, check for code existence
Additional information: link
Function IUniswapV2Pair.DOMAIN_SEPARATOR() (#538) is not in mixedCase
Function IUniswapV2Pair.PERMIT_TYPEHASH() (#539) is not in mixedCase
Function IUniswapV2Pair.MINIMUM_LIQUIDITY() (#556) is not in mixedCase
Function IUniswapV2Router01.WETH() (#578) is not in mixedCase
Parameter MarshallRoganInu.setSwapAndLiquifyEnabled(bool)._enabled (#925) is not in mixedCase
Parameter MarshallRoganInu.calculateTaxFee(uint256)._amount (#984) is not in mixedCase
Parameter MarshallRoganInu.calculateLiquidityFee(uint256)._amount (#990) is not in mixedCase
Variable MarshallRoganInu._taxFee (#738) is not in mixedCase
Variable MarshallRoganInu._liquidityFee (#741) is not in mixedCase
Variable MarshallRoganInu._maxTxAmount (#750) is not in mixedCase
Follow the Solidity naming convention.
Additional information: link
Redundant expression "this (#272)" inContext (#266-275)
Remove redundant statements if they congest code but offer no value.
Additional information: link
Variable IUniswapV2Router01.addLiquidity(address,address,uint256,uint256,uint256,uint256,address,uint256).amountADesired (#583) is too similar to IUniswapV2Router01.addLiquidity(address,address,uint256,uint256,uint256,uint256,address,uint256).amountBDesired (#584)
Variable MarshallRoganInu._transferFromExcluded(address,address,uint256).rTransferAmount (#1166) is too similar to MarshallRoganInu._getTValues(uint256).tTransferAmount (#947)
Variable MarshallRoganInu.reflectionFromToken(uint256,bool).rTransferAmount (#859) is too similar to MarshallRoganInu._getValues(uint256).tTransferAmount (#939)
Variable MarshallRoganInu._transferStandard(address,address,uint256).rTransferAmount (#1147) is too similar to MarshallRoganInu._transferToExcluded(address,address,uint256).tTransferAmount (#1156)
Variable MarshallRoganInu._transferBothExcluded(address,address,uint256).rTransferAmount (#893) is too similar to MarshallRoganInu._getTValues(uint256).tTransferAmount (#947)
Variable MarshallRoganInu._transferToExcluded(address,address,uint256).rTransferAmount (#1156) is too similar to MarshallRoganInu._transferToExcluded(address,address,uint256).tTransferAmount (#1156)
Variable MarshallRoganInu._getRValues(uint256,uint256,uint256,uint256).rTransferAmount (#955) is too similar to MarshallRoganInu._transferBothExcluded(address,address,uint256).tTransferAmount (#893)
Variable MarshallRoganInu._getValues(uint256).rTransferAmount (#940) is too similar to MarshallRoganInu._transferToExcluded(address,address,uint256).tTransferAmount (#1156)
Variable MarshallRoganInu._getRValues(uint256,uint256,uint256,uint256).rTransferAmount (#955) is too similar to MarshallRoganInu._getValues(uint256).tTransferAmount (#939)
Variable MarshallRoganInu._transferStandard(address,address,uint256).rTransferAmount (#1147) is too similar to MarshallRoganInu._transferStandard(address,address,uint256).tTransferAmount (#1147)
Variable MarshallRoganInu._transferFromExcluded(address,address,uint256).rTransferAmount (#1166) is too similar to MarshallRoganInu._transferBothExcluded(address,address,uint256).tTransferAmount (#893)
Variable MarshallRoganInu._transferFromExcluded(address,address,uint256).rTransferAmount (#1166) is too similar to MarshallRoganInu._getValues(uint256).tTransferAmount (#939)
Variable MarshallRoganInu._transferStandard(address,address,uint256).rTransferAmount (#1147) is too similar to MarshallRoganInu._getTValues(uint256).tTransferAmount (#947)
Variable MarshallRoganInu._transferBothExcluded(address,address,uint256).rTransferAmount (#893) is too similar to MarshallRoganInu._transferBothExcluded(address,address,uint256).tTransferAmount (#893)
Variable MarshallRoganInu._getRValues(uint256,uint256,uint256,uint256).rTransferAmount (#955) is too similar to MarshallRoganInu._transferFromExcluded(address,address,uint256).tTransferAmount (#1166)
Variable MarshallRoganInu.reflectionFromToken(uint256,bool).rTransferAmount (#859) is too similar to MarshallRoganInu._transferToExcluded(address,address,uint256).tTransferAmount (#1156)
Variable MarshallRoganInu._transferBothExcluded(address,address,uint256).rTransferAmount (#893) is too similar to MarshallRoganInu._getValues(uint256).tTransferAmount (#939)
Variable MarshallRoganInu._getValues(uint256).rTransferAmount (#940) is too similar to MarshallRoganInu._getTValues(uint256).tTransferAmount (#947)
Variable MarshallRoganInu._transferFromExcluded(address,address,uint256).rTransferAmount (#1166) is too similar to MarshallRoganInu._transferFromExcluded(address,address,uint256).tTransferAmount (#1166)
Variable MarshallRoganInu._transferStandard(address,address,uint256).rTransferAmount (#1147) is too similar to MarshallRoganInu._transferBothExcluded(address,address,uint256).tTransferAmount (#893)
Variable MarshallRoganInu._getRValues(uint256,uint256,uint256,uint256).rTransferAmount (#955) is too similar to MarshallRoganInu._transferToExcluded(address,address,uint256).tTransferAmount (#1156)
Variable MarshallRoganInu._transferStandard(address,address,uint256).rTransferAmount (#1147) is too similar to MarshallRoganInu._getValues(uint256).tTransferAmount (#939)
Variable MarshallRoganInu._transferBothExcluded(address,address,uint256).rTransferAmount (#893) is too similar to MarshallRoganInu._transferFromExcluded(address,address,uint256).tTransferAmount (#1166)
Variable MarshallRoganInu._transferToExcluded(address,address,uint256).rTransferAmount (#1156) is too similar to MarshallRoganInu._getValues(uint256).tTransferAmount (#939)
Variable MarshallRoganInu._transferFromExcluded(address,address,uint256).rTransferAmount (#1166) is too similar to MarshallRoganInu._transferToExcluded(address,address,uint256).tTransferAmount (#1156)
Variable MarshallRoganInu._getValues(uint256).rTransferAmount (#940) is too similar to MarshallRoganInu._getValues(uint256).tTransferAmount (#939)
Variable MarshallRoganInu._transferStandard(address,address,uint256).rTransferAmount (#1147) is too similar to MarshallRoganInu._transferFromExcluded(address,address,uint256).tTransferAmount (#1166)
Variable MarshallRoganInu._getRValues(uint256,uint256,uint256,uint256).rTransferAmount (#955) is too similar to MarshallRoganInu._transferStandard(address,address,uint256).tTransferAmount (#1147)
Variable MarshallRoganInu._transferBothExcluded(address,address,uint256).rTransferAmount (#893) is too similar to MarshallRoganInu._transferToExcluded(address,address,uint256).tTransferAmount (#1156)
Variable MarshallRoganInu._getRValues(uint256,uint256,uint256,uint256).rTransferAmount (#955) is too similar to MarshallRoganInu._getTValues(uint256).tTransferAmount (#947)
Variable MarshallRoganInu._transferToExcluded(address,address,uint256).rTransferAmount (#1156) is too similar to MarshallRoganInu._transferFromExcluded(address,address,uint256).tTransferAmount (#1166)
Variable MarshallRoganInu._transferToExcluded(address,address,uint256).rTransferAmount (#1156) is too similar to MarshallRoganInu._transferBothExcluded(address,address,uint256).tTransferAmount (#893)
Variable MarshallRoganInu._transferToExcluded(address,address,uint256).rTransferAmount (#1156) is too similar to MarshallRoganInu._transferStandard(address,address,uint256).tTransferAmount (#1147)
Variable MarshallRoganInu._transferToExcluded(address,address,uint256).rTransferAmount (#1156) is too similar to MarshallRoganInu._getTValues(uint256).tTransferAmount (#947)
Variable MarshallRoganInu._getValues(uint256).rTransferAmount (#940) is too similar to MarshallRoganInu._transferFromExcluded(address,address,uint256).tTransferAmount (#1166)
Variable MarshallRoganInu.reflectionFromToken(uint256,bool).rTransferAmount (#859) is too similar to MarshallRoganInu._transferFromExcluded(address,address,uint256).tTransferAmount (#1166)
Variable MarshallRoganInu._getValues(uint256).rTransferAmount (#940) is too similar to MarshallRoganInu._transferBothExcluded(address,address,uint256).tTransferAmount (#893)
Variable MarshallRoganInu._transferBothExcluded(address,address,uint256).rTransferAmount (#893) is too similar to MarshallRoganInu._transferStandard(address,address,uint256).tTransferAmount (#1147)
Variable MarshallRoganInu._getValues(uint256).rTransferAmount (#940) is too similar to MarshallRoganInu._transferStandard(address,address,uint256).tTransferAmount (#1147)
Variable MarshallRoganInu.reflectionFromToken(uint256,bool).rTransferAmount (#859) is too similar to MarshallRoganInu._transferBothExcluded(address,address,uint256).tTransferAmount (#893)
Variable MarshallRoganInu.reflectionFromToken(uint256,bool).rTransferAmount (#859) is too similar to MarshallRoganInu._transferStandard(address,address,uint256).tTransferAmount (#1147)
Variable MarshallRoganInu.reflectionFromToken(uint256,bool).rTransferAmount (#859) is too similar to MarshallRoganInu._getTValues(uint256).tTransferAmount (#947)
Variable MarshallRoganInu._transferFromExcluded(address,address,uint256).rTransferAmount (#1166) is too similar to MarshallRoganInu._transferStandard(address,address,uint256).tTransferAmount (#1147)
Prevent variables from having similar names.
Additional information: link
MarshallRoganInu.slitherConstructorVariables() (#716-1179) uses literals with too many digits:
- _tTotal = 100000000000 * 10 ** 6 * 10 ** 9 (#730)
MarshallRoganInu.slitherConstructorVariables() (#716-1179) uses literals with too many digits:
- _maxTxAmount = 500000000 * 10 ** 6 * 10 ** 9 (#750)
MarshallRoganInu.slitherConstructorVariables() (#716-1179) uses literals with too many digits:
- numTokensSellToAddToLiquidity = 50000000 * 10 ** 6 * 10 ** 9 (#751)
Use: Ether suffix, Time suffix, or The scientific notation
Additional information: link
MarshallRoganInu._decimals (#736) should be constant
MarshallRoganInu._name (#734) should be constant
MarshallRoganInu._symbol (#735) should be constant
MarshallRoganInu._tTotal (#730) should be constant
MarshallRoganInu.numTokensSellToAddToLiquidity (#751) should be constant
Add the constant attributes to state variables that never change.
Additional information: link
renounceOwnership() should be declared external:
- Ownable.renounceOwnership() (#466-469)
transferOwnership(address) should be declared external:
- Ownable.transferOwnership(address) (#475-479)
geUnlockTime() should be declared external:
- Ownable.geUnlockTime() (#481-483)
lock(uint256) should be declared external:
- Ownable.lock(uint256) (#486-491)
unlock() should be declared external:
- Ownable.unlock() (#494-499)
name() should be declared external:
- MarshallRoganInu.name() (#785-787)
symbol() should be declared external:
- MarshallRoganInu.symbol() (#789-791)
decimals() should be declared external:
- MarshallRoganInu.decimals() (#793-795)
totalSupply() should be declared external:
- MarshallRoganInu.totalSupply() (#797-799)
transfer(address,uint256) should be declared external:
- MarshallRoganInu.transfer(address,uint256) (#806-809)
allowance(address,address) should be declared external:
- MarshallRoganInu.allowance(address,address) (#811-813)
approve(address,uint256) should be declared external:
- MarshallRoganInu.approve(address,uint256) (#815-818)
transferFrom(address,address,uint256) should be declared external:
- MarshallRoganInu.transferFrom(address,address,uint256) (#820-824)
increaseAllowance(address,uint256) should be declared external:
- MarshallRoganInu.increaseAllowance(address,uint256) (#826-829)
decreaseAllowance(address,uint256) should be declared external:
- MarshallRoganInu.decreaseAllowance(address,uint256) (#831-834)
isExcludedFromReward(address) should be declared external:
- MarshallRoganInu.isExcludedFromReward(address) (#836-838)
totalFees() should be declared external:
- MarshallRoganInu.totalFees() (#840-842)
deliver(uint256) should be declared external:
- MarshallRoganInu.deliver(uint256) (#844-851)
reflectionFromToken(uint256,bool) should be declared external:
- MarshallRoganInu.reflectionFromToken(uint256,bool) (#853-862)
excludeFromReward(address) should be declared external:
- MarshallRoganInu.excludeFromReward(address) (#870-878)
excludeFromFee(address) should be declared external:
- MarshallRoganInu.excludeFromFee(address) (#903-905)
includeInFee(address) should be declared external:
- MarshallRoganInu.includeInFee(address) (#907-909)
setSwapAndLiquifyEnabled(bool) should be declared external:
- MarshallRoganInu.setSwapAndLiquifyEnabled(bool) (#925-928)
isExcludedFromFee(address) should be declared external:
- MarshallRoganInu.isExcludedFromFee(address) (#1011-1013)
Use the external attribute for functions never called from the contract.
Additional information: link
Unable to find website, listings and other project-related information
Young tokens have high risks of scam / price dump / death
Token has no active CoinGecko listing / rank
Token has no active CoinMarketCap listing / rank
Unable to find Telegram and Twitter accounts