MOJOS CLUB Token Logo

MJC [MOJOS CLUB] Token

About MJC

Listings

Not Found
Token 3 months

Website

Not Found

Official TG Portal: https://t.me/mojosclubofficialportal
🌐 Website: https://mojosclub.io/ 🐦 Twitter : https://twitter.com/MojosClubToken

Social

Laser Scorebeta Last Audit: 17 February 2022

report
Code:


Unable to find manual contract audit (e.g. Certik, PeckShield, Solidity...)

Reentrancy in MJC._transfer(address,address,uint256) (#987-1035):
External calls:
- swapAndLiquify(contractTokenBalance) (#1030)
- uniswapV2Router.addLiquidityETH{value: ethAmount}(address(this),tokenAmount,0,0,owner(),block.timestamp) (#1115-1122)
- uniswapV2Router.swapExactTokensForETHSupportingFeeOnTransferTokens(tokenAmount,0,path,address(this),block.timestamp) (#1101-1107)
- uniswapV2Router.swapExactTokensForETHSupportingFeeOnTransferTokens(tokenAmount,0,path,_to,block.timestamp) (#1082-1088)
External calls sending eth:
- swapAndLiquify(contractTokenBalance) (#1030)
- uniswapV2Router.addLiquidityETH{value: ethAmount}(address(this),tokenAmount,0,0,owner(),block.timestamp) (#1115-1122)
State variables written after the call(s):
- _tokenTransfer(from,to,amount) (#1034)
- _devFee = _previousdevFee (#972)
- _devFee = 0 (#964)
- _tokenTransfer(from,to,amount) (#1034)
- _liquidityFee = _previousLiquidityFee (#970)
- _liquidityFee = 0 (#963)
- _tokenTransfer(from,to,amount) (#1034)
- _marketingFee = _previousMarketingFee (#971)
- _marketingFee = 0 (#965)
- _tokenTransfer(from,to,amount) (#1034)
- _rOwned[address(this)] = _rOwned[address(this)].add(rLiquidity) (#937)
- _rOwned[sender] = _rOwned[sender].sub(rAmount) (#1200)
- _rOwned[address(this)] = _rOwned[address(this)].add(rMarketing) (#1178)
- _rOwned[address(this)] = _rOwned[address(this)].add(rTeam) (#1192)
- _rOwned[sender] = _rOwned[sender].sub(rAmount) (#878)
- _rOwned[sender] = _rOwned[sender].sub(rAmount) (#1211)
- _rOwned[recipient] = _rOwned[recipient].add(rTransferAmount) (#1202)
- _rOwned[sender] = _rOwned[sender].sub(rAmount) (#1162)
- _rOwned[recipient] = _rOwned[recipient].add(rTransferAmount) (#1212)
- _rOwned[recipient] = _rOwned[recipient].add(rTransferAmount) (#1163)
- _rOwned[recipient] = _rOwned[recipient].add(rTransferAmount) (#880)
- _tokenTransfer(from,to,amount) (#1034)
- _rTotal = _rTotal.sub(rFee) (#892)
- _tokenTransfer(from,to,amount) (#1034)
- _tOwned[address(this)] = _tOwned[address(this)].add(tLiquidity) (#939)
- _tOwned[sender] = _tOwned[sender].sub(tAmount) (#877)
- _tOwned[sender] = _tOwned[sender].sub(tAmount) (#1210)
- _tOwned[recipient] = _tOwned[recipient].add(tTransferAmount) (#1201)
- _tOwned[recipient] = _tOwned[recipient].add(tTransferAmount) (#879)
Reentrancy in MJC.swapAndLiquify(uint256) (#1037-1067):
External calls:
- swapTokensForEth(half) (#1053)
- uniswapV2Router.swapExactTokensForETHSupportingFeeOnTransferTokens(tokenAmount,0,path,address(this),block.timestamp) (#1101-1107)
- addLiquidity(otherHalf,newBalance) (#1059)
- uniswapV2Router.addLiquidityETH{value: ethAmount}(address(this),tokenAmount,0,0,owner(),block.timestamp) (#1115-1122)
- swapTokensForWallets(marketingTokenShare,marketingWallet) (#1061)
- uniswapV2Router.swapExactTokensForETHSupportingFeeOnTransferTokens(tokenAmount,0,path,_to,block.timestamp) (#1082-1088)
- swapTokensForWallets(teamTokenShare,devWallet) (#1062)
- uniswapV2Router.swapExactTokensForETHSupportingFeeOnTransferTokens(tokenAmount,0,path,_to,block.timestamp) (#1082-1088)
External calls sending eth:
- addLiquidity(otherHalf,newBalance) (#1059)
- uniswapV2Router.addLiquidityETH{value: ethAmount}(address(this),tokenAmount,0,0,owner(),block.timestamp) (#1115-1122)
State variables written after the call(s):
- swapTokensForWallets(teamTokenShare,devWallet) (#1062)
- _allowances[owner][spender] = amount (#983)
Reentrancy in MJC.transferFrom(address,address,uint256) (#803-807):
External calls:
- _transfer(sender,recipient,amount) (#804)
- uniswapV2Router.addLiquidityETH{value: ethAmount}(address(this),tokenAmount,0,0,owner(),block.timestamp) (#1115-1122)
- uniswapV2Router.swapExactTokensForETHSupportingFeeOnTransferTokens(tokenAmount,0,path,address(this),block.timestamp) (#1101-1107)
- uniswapV2Router.swapExactTokensForETHSupportingFeeOnTransferTokens(tokenAmount,0,path,_to,block.timestamp) (#1082-1088)
External calls sending eth:
- _transfer(sender,recipient,amount) (#804)
- uniswapV2Router.addLiquidityETH{value: ethAmount}(address(this),tokenAmount,0,0,owner(),block.timestamp) (#1115-1122)
State variables written after the call(s):
- _approve(sender,_msgSender(),_allowances[sender][_msgSender()].sub(amount,ERC20: transfer amount exceeds allowance)) (#805)
- _allowances[owner][spender] = amount (#983)
Apply the check-effects-interactions pattern.

Additional information: link

MJC.takeMarketing(address,uint256,uint256,uint256) (#1170-1181) performs a multiplication on the result of a division:
-tMarketing = tAmount.div(100).mul(_marketingFee) (#1174)
MJC.takeTeam(address,uint256,uint256,uint256) (#1184-1195) performs a multiplication on the result of a division:
-tTeam = tAmount.div(100).mul(_devFee) (#1188)
Consider ordering multiplication before division.

Additional information: link

MJC.addLiquidity(uint256,uint256) (#1110-1123) ignores return value by uniswapV2Router.addLiquidityETH{value: ethAmount}(address(this),tokenAmount,0,0,owner(),block.timestamp) (#1115-1122)
Ensure that all the return values of the function calls are used.

Additional information: link

MJC.allowance(address,address).owner (#794) shadows:
- Ownable.owner() (#47-49) (function)
MJC._approve(address,address,uint256).owner (#979) shadows:
- Ownable.owner() (#47-49) (function)
Rename the local variables that shadow another component.

Additional information: link

MJC.setFeePercent(uint256,uint256,uint256,uint256) (#1234-1239) should emit an event for:
- _taxFee = taxFee (#1235)
- _liquidityFee = liquidityFee (#1236)
- _devFee = devFee (#1237)
- _marketingFee = marketingFee (#1238)
MJC.setSwapTokensAtAmount(uint256) (#1241-1243) should emit an event for:
- swapTokensAtAmount = newAmount * 10 ** 9 (#1242)
MJC.setMaxTxAmount(uint256) (#1245-1248) should emit an event for:
- _maxTxAmount = maxTxAmount * 10 ** 9 (#1247)
MJC.setMaxBuytx(uint256) (#1250-1252) should emit an event for:
- maxBuyTransactionAmount = _maxBuyTxAmount * 10 ** 9 (#1251)
MJC.setMaxWalletTokens(uint256) (#1254-1256) should emit an event for:
- maxWalletToken = _maxToken * (10 ** 9) (#1255)
Emit an event for critical parameter changes.

Additional information: link

MJC.setMarketingWallet(address).newWallet (#1226) lacks a zero-check on :
- marketingWallet = newWallet (#1227)
MJC.setdevWallet(address).newWallet (#1230) lacks a zero-check on :
- devWallet = newWallet (#1231)
Check that the address is not zero.

Additional information: link

Reentrancy in MJC._transfer(address,address,uint256) (#987-1035):
External calls:
- swapAndLiquify(contractTokenBalance) (#1030)
- uniswapV2Router.addLiquidityETH{value: ethAmount}(address(this),tokenAmount,0,0,owner(),block.timestamp) (#1115-1122)
- uniswapV2Router.swapExactTokensForETHSupportingFeeOnTransferTokens(tokenAmount,0,path,address(this),block.timestamp) (#1101-1107)
- uniswapV2Router.swapExactTokensForETHSupportingFeeOnTransferTokens(tokenAmount,0,path,_to,block.timestamp) (#1082-1088)
External calls sending eth:
- swapAndLiquify(contractTokenBalance) (#1030)
- uniswapV2Router.addLiquidityETH{value: ethAmount}(address(this),tokenAmount,0,0,owner(),block.timestamp) (#1115-1122)
State variables written after the call(s):
- _tokenTransfer(from,to,amount) (#1034)
- _previousLiquidityFee = _liquidityFee (#958)
- _tokenTransfer(from,to,amount) (#1034)
- _previousMarketingFee = _marketingFee (#959)
- _tokenTransfer(from,to,amount) (#1034)
- _previousTaxFee = _taxFee (#957)
- _tokenTransfer(from,to,amount) (#1034)
- _previousdevFee = _devFee (#960)
- _tokenTransfer(from,to,amount) (#1034)
- _tFeeTotal = _tFeeTotal.add(tFee) (#893)
- _tokenTransfer(from,to,amount) (#1034)
- _taxFee = _previousTaxFee (#969)
- _taxFee = 0 (#962)
Reentrancy in MJC.constructor() (#747-766):
External calls:
- uniswapV2Pair = IUniswapV2Factory(_uniswapV2Router.factory()).createPair(address(this),_uniswapV2Router.WETH()) (#753-754)
State variables written after the call(s):
- _isExcludedFromFee[owner()] = true (#760)
- _isExcludedFromFee[marketingWallet] = true (#761)
- _isExcludedFromFee[devWallet] = true (#762)
- _isExcludedFromFee[address(this)] = true (#763)
- uniswapV2Router = _uniswapV2Router (#757)
Reentrancy in MJC.swapAndLiquify(uint256) (#1037-1067):
External calls:
- swapTokensForEth(half) (#1053)
- uniswapV2Router.swapExactTokensForETHSupportingFeeOnTransferTokens(tokenAmount,0,path,address(this),block.timestamp) (#1101-1107)
- addLiquidity(otherHalf,newBalance) (#1059)
- uniswapV2Router.addLiquidityETH{value: ethAmount}(address(this),tokenAmount,0,0,owner(),block.timestamp) (#1115-1122)
External calls sending eth:
- addLiquidity(otherHalf,newBalance) (#1059)
- uniswapV2Router.addLiquidityETH{value: ethAmount}(address(this),tokenAmount,0,0,owner(),block.timestamp) (#1115-1122)
State variables written after the call(s):
- addLiquidity(otherHalf,newBalance) (#1059)
- _allowances[owner][spender] = amount (#983)
Apply the check-effects-interactions pattern.

Additional information: link

Reentrancy in MJC._transfer(address,address,uint256) (#987-1035):
External calls:
- swapAndLiquify(contractTokenBalance) (#1030)
- uniswapV2Router.addLiquidityETH{value: ethAmount}(address(this),tokenAmount,0,0,owner(),block.timestamp) (#1115-1122)
- uniswapV2Router.swapExactTokensForETHSupportingFeeOnTransferTokens(tokenAmount,0,path,address(this),block.timestamp) (#1101-1107)
- uniswapV2Router.swapExactTokensForETHSupportingFeeOnTransferTokens(tokenAmount,0,path,_to,block.timestamp) (#1082-1088)
External calls sending eth:
- swapAndLiquify(contractTokenBalance) (#1030)
- uniswapV2Router.addLiquidityETH{value: ethAmount}(address(this),tokenAmount,0,0,owner(),block.timestamp) (#1115-1122)
Event emitted after the call(s):
- Transfer(sender,address(this),tTeam) (#1193)
- _tokenTransfer(from,to,amount) (#1034)
- Transfer(sender,address(this),tMarketing) (#1179)
- _tokenTransfer(from,to,amount) (#1034)
- Transfer(sender,recipient,tTransferAmount) (#1215)
- _tokenTransfer(from,to,amount) (#1034)
- Transfer(sender,recipient,tTransferAmount) (#1205)
- _tokenTransfer(from,to,amount) (#1034)
- Transfer(sender,recipient,tTransferAmount) (#883)
- _tokenTransfer(from,to,amount) (#1034)
- Transfer(sender,recipient,tTransferAmount) (#1166)
- _tokenTransfer(from,to,amount) (#1034)
Reentrancy in MJC.constructor() (#747-766):
External calls:
- uniswapV2Pair = IUniswapV2Factory(_uniswapV2Router.factory()).createPair(address(this),_uniswapV2Router.WETH()) (#753-754)
Event emitted after the call(s):
- Transfer(address(0),owner(),_tTotal) (#765)
Reentrancy in MJC.swapAndLiquify(uint256) (#1037-1067):
External calls:
- swapTokensForEth(half) (#1053)
- uniswapV2Router.swapExactTokensForETHSupportingFeeOnTransferTokens(tokenAmount,0,path,address(this),block.timestamp) (#1101-1107)
- addLiquidity(otherHalf,newBalance) (#1059)
- uniswapV2Router.addLiquidityETH{value: ethAmount}(address(this),tokenAmount,0,0,owner(),block.timestamp) (#1115-1122)
External calls sending eth:
- addLiquidity(otherHalf,newBalance) (#1059)
- uniswapV2Router.addLiquidityETH{value: ethAmount}(address(this),tokenAmount,0,0,owner(),block.timestamp) (#1115-1122)
Event emitted after the call(s):
- Approval(owner,spender,amount) (#984)
- addLiquidity(otherHalf,newBalance) (#1059)
Reentrancy in MJC.swapAndLiquify(uint256) (#1037-1067):
External calls:
- swapTokensForEth(half) (#1053)
- uniswapV2Router.swapExactTokensForETHSupportingFeeOnTransferTokens(tokenAmount,0,path,address(this),block.timestamp) (#1101-1107)
- addLiquidity(otherHalf,newBalance) (#1059)
- uniswapV2Router.addLiquidityETH{value: ethAmount}(address(this),tokenAmount,0,0,owner(),block.timestamp) (#1115-1122)
- swapTokensForWallets(marketingTokenShare,marketingWallet) (#1061)
- uniswapV2Router.swapExactTokensForETHSupportingFeeOnTransferTokens(tokenAmount,0,path,_to,block.timestamp) (#1082-1088)
External calls sending eth:
- addLiquidity(otherHalf,newBalance) (#1059)
- uniswapV2Router.addLiquidityETH{value: ethAmount}(address(this),tokenAmount,0,0,owner(),block.timestamp) (#1115-1122)
Event emitted after the call(s):
- Approval(owner,spender,amount) (#984)
- swapTokensForWallets(marketingTokenShare,marketingWallet) (#1061)
Reentrancy in MJC.swapAndLiquify(uint256) (#1037-1067):
External calls:
- swapTokensForEth(half) (#1053)
- uniswapV2Router.swapExactTokensForETHSupportingFeeOnTransferTokens(tokenAmount,0,path,address(this),block.timestamp) (#1101-1107)
- addLiquidity(otherHalf,newBalance) (#1059)
- uniswapV2Router.addLiquidityETH{value: ethAmount}(address(this),tokenAmount,0,0,owner(),block.timestamp) (#1115-1122)
- swapTokensForWallets(marketingTokenShare,marketingWallet) (#1061)
- uniswapV2Router.swapExactTokensForETHSupportingFeeOnTransferTokens(tokenAmount,0,path,_to,block.timestamp) (#1082-1088)
- swapTokensForWallets(teamTokenShare,devWallet) (#1062)
- uniswapV2Router.swapExactTokensForETHSupportingFeeOnTransferTokens(tokenAmount,0,path,_to,block.timestamp) (#1082-1088)
External calls sending eth:
- addLiquidity(otherHalf,newBalance) (#1059)
- uniswapV2Router.addLiquidityETH{value: ethAmount}(address(this),tokenAmount,0,0,owner(),block.timestamp) (#1115-1122)
Event emitted after the call(s):
- Approval(owner,spender,amount) (#984)
- swapTokensForWallets(teamTokenShare,devWallet) (#1062)
- SwapAndLiquify(half,newBalance,otherHalf) (#1066)
Reentrancy in MJC.transferFrom(address,address,uint256) (#803-807):
External calls:
- _transfer(sender,recipient,amount) (#804)
- uniswapV2Router.addLiquidityETH{value: ethAmount}(address(this),tokenAmount,0,0,owner(),block.timestamp) (#1115-1122)
- uniswapV2Router.swapExactTokensForETHSupportingFeeOnTransferTokens(tokenAmount,0,path,address(this),block.timestamp) (#1101-1107)
- uniswapV2Router.swapExactTokensForETHSupportingFeeOnTransferTokens(tokenAmount,0,path,_to,block.timestamp) (#1082-1088)
External calls sending eth:
- _transfer(sender,recipient,amount) (#804)
- uniswapV2Router.addLiquidityETH{value: ethAmount}(address(this),tokenAmount,0,0,owner(),block.timestamp) (#1115-1122)
Event emitted after the call(s):
- Approval(owner,spender,amount) (#984)
- _approve(sender,_msgSender(),_allowances[sender][_msgSender()].sub(amount,ERC20: transfer amount exceeds allowance)) (#805)
Apply the check-effects-interactions pattern.

Additional information: link

Ownable.unlock() (#94-99) uses timestamp for comparisons
Dangerous comparisons:
- require(bool,string)(block.timestamp > _lockTime,Contract is locked until 7 days) (#96)
Avoid relying on block.timestamp.

Additional information: link

Address.isContract(address) (#351-360) uses assembly
- INLINE ASM (#358)
Address._functionCallWithValue(address,bytes,uint256,string) (#444-465) uses assembly
- INLINE ASM (#457-460)
Do not use evm assembly.

Additional information: link

MJC.includeInReward(address) (#862-873) has costly operations inside a loop:
- _excluded.pop() (#869)
Use a local variable to hold the loop computation result.

Additional information: link

Address._functionCallWithValue(address,bytes,uint256,string) (#444-465) is never used and should be removed
Address.functionCall(address,bytes) (#404-406) is never used and should be removed
Address.functionCall(address,bytes,string) (#414-416) is never used and should be removed
Address.functionCallWithValue(address,bytes,uint256) (#429-431) is never used and should be removed
Address.functionCallWithValue(address,bytes,uint256,string) (#439-442) is never used and should be removed
Address.isContract(address) (#351-360) is never used and should be removed
Address.sendValue(address,uint256) (#378-384) is never used and should be removed
Context._msgData() (#10-13) is never used and should be removed
SafeMath.mod(uint256,uint256) (#308-310) is never used and should be removed
SafeMath.mod(uint256,uint256,string) (#324-327) is never used and should be removed
Remove unused functions.

Additional information: link

MJC._rTotal (#697) is set pre-construction with a non-constant function or state variable:
- (MAX - (MAX % _tTotal))
MJC._previousTaxFee (#705) is set pre-construction with a non-constant function or state variable:
- _taxFee
MJC._previousLiquidityFee (#708) is set pre-construction with a non-constant function or state variable:
- _liquidityFee
MJC._previousMarketingFee (#712) is set pre-construction with a non-constant function or state variable:
- _marketingFee
MJC._previousdevFee (#719) is set pre-construction with a non-constant function or state variable:
- _devFee
Remove any initialization of state variables via non-constant state variables or function calls. If variables must be set upon contract deployment, locate initialization in the constructor instead.

Additional information: link

Pragma version0.8.10 (#3) necessitates a version too recent to be trusted. Consider deploying with 0.6.12/0.7.6/0.8.7
solc-0.8.10 is not recommended for deployment
Deploy with any of the following Solidity versions: 0.5.16 - 0.5.17, 0.6.11 - 0.6.12, 0.7.5 - 0.7.6 Use a simple pragma version that allows any of these versions. Consider using the latest version of Solidity for testing.

Additional information: link

Low level call in Address.sendValue(address,uint256) (#378-384):
- (success) = recipient.call{value: amount}() (#382)
Low level call in Address._functionCallWithValue(address,bytes,uint256,string) (#444-465):
- (success,returndata) = target.call{value: weiValue}(data) (#448)
Avoid low-level calls. Check the call success. If the call is meant for a contract, check for code existence

Additional information: link

Function IUniswapV2Pair.DOMAIN_SEPARATOR() (#504) is not in mixedCase
Function IUniswapV2Pair.PERMIT_TYPEHASH() (#505) is not in mixedCase
Function IUniswapV2Pair.MINIMUM_LIQUIDITY() (#521) is not in mixedCase
Function IUniswapV2Router01.WETH() (#542) is not in mixedCase
Parameter MJC.calculateTaxFee(uint256)._amount (#942) is not in mixedCase
Parameter MJC.calculateLiquidityFee(uint256)._amount (#948) is not in mixedCase
Parameter MJC.swapTokensForWallets(uint256,address)._to (#1069) is not in mixedCase
Parameter MJC.setMaxBuytx(uint256)._maxBuyTxAmount (#1250) is not in mixedCase
Parameter MJC.setMaxWalletTokens(uint256)._maxToken (#1254) is not in mixedCase
Parameter MJC.setSwapAndLiquifyEnabled(bool)._enabled (#1258) is not in mixedCase
Variable MJC._taxFee (#704) is not in mixedCase
Variable MJC._liquidityFee (#707) is not in mixedCase
Variable MJC._marketingFee (#711) is not in mixedCase
Variable MJC._devFee (#717) is not in mixedCase
Variable MJC._maxTxAmount (#728) is not in mixedCase
Follow the Solidity naming convention.

Additional information: link

Redundant expression "this (#11)" inContext (#5-14)
Remove redundant statements if they congest code but offer no value.

Additional information: link

Variable IUniswapV2Router01.addLiquidity(address,address,uint256,uint256,uint256,uint256,address,uint256).amountADesired (#547) is too similar to IUniswapV2Router01.addLiquidity(address,address,uint256,uint256,uint256,uint256,address,uint256).amountBDesired (#548)
Variable MJC._transferToExcluded(address,address,uint256).rTransferAmount (#1199) is too similar to MJC.takeMarketing(address,uint256,uint256,uint256).tTransferAmount (#1170)
Variable MJC._transferToExcluded(address,address,uint256).rTransferAmount (#1199) is too similar to MJC._transferStandard(address,address,uint256).tTransferAmount (#1159)
Variable MJC._transferToExcluded(address,address,uint256).rTransferAmount (#1199) is too similar to MJC._getValues(uint256).tTransferAmount (#897)
Variable MJC.reflectionFromToken(uint256,bool).rTransferAmount (#842) is too similar to MJC.takeMarketing(address,uint256,uint256,uint256).tTransferAmount (#1170)
Variable MJC.reflectionFromToken(uint256,bool).rTransferAmount (#842) is too similar to MJC._getValues(uint256).tTransferAmount (#897)
Variable MJC.takeMarketing(address,uint256,uint256,uint256).rTransferAmount (#1170) is too similar to MJC._getTValues(uint256).tTransferAmount (#905)
Variable MJC._transferToExcluded(address,address,uint256).rTransferAmount (#1199) is too similar to MJC._getTValues(uint256).tTransferAmount (#905)
Variable MJC.reflectionFromToken(uint256,bool).rTransferAmount (#842) is too similar to MJC._getTValues(uint256).tTransferAmount (#905)
Variable MJC._transferToExcluded(address,address,uint256).rTransferAmount (#1199) is too similar to MJC._transferFromExcluded(address,address,uint256).tTransferAmount (#1209)
Variable MJC.reflectionFromToken(uint256,bool).rTransferAmount (#842) is too similar to MJC._transferFromExcluded(address,address,uint256).tTransferAmount (#1209)
Variable MJC.takeMarketing(address,uint256,uint256,uint256).rTransferAmount (#1170) is too similar to MJC._transferFromExcluded(address,address,uint256).tTransferAmount (#1209)
Variable MJC._transferFromExcluded(address,address,uint256).rTransferAmount (#1209) is too similar to MJC._transferStandard(address,address,uint256).tTransferAmount (#1159)
Variable MJC._transferFromExcluded(address,address,uint256).rTransferAmount (#1209) is too similar to MJC._getValues(uint256).tTransferAmount (#897)
Variable MJC.takeTeam(address,uint256,uint256,uint256).rTransferAmount (#1184) is too similar to MJC._transferStandard(address,address,uint256).tTransferAmount (#1159)
Variable MJC.takeTeam(address,uint256,uint256,uint256).rTransferAmount (#1184) is too similar to MJC._getValues(uint256).tTransferAmount (#897)
Variable MJC._transferFromExcluded(address,address,uint256).rTransferAmount (#1209) is too similar to MJC._getTValues(uint256).tTransferAmount (#905)
Variable MJC._getValues(uint256).rTransferAmount (#898) is too similar to MJC._transferBothExcluded(address,address,uint256).tTransferAmount (#876)
Variable MJC._transferBothExcluded(address,address,uint256).rTransferAmount (#876) is too similar to MJC._transferBothExcluded(address,address,uint256).tTransferAmount (#876)
Variable MJC.takeTeam(address,uint256,uint256,uint256).rTransferAmount (#1184) is too similar to MJC._getTValues(uint256).tTransferAmount (#905)
Variable MJC._transferFromExcluded(address,address,uint256).rTransferAmount (#1209) is too similar to MJC._transferFromExcluded(address,address,uint256).tTransferAmount (#1209)
Variable MJC.takeTeam(address,uint256,uint256,uint256).rTransferAmount (#1184) is too similar to MJC._transferFromExcluded(address,address,uint256).tTransferAmount (#1209)
Variable MJC.reflectionFromToken(uint256,bool).rTransferAmount (#842) is too similar to MJC.takeTeam(address,uint256,uint256,uint256).tTransferAmount (#1184)
Variable MJC.takeMarketing(address,uint256,uint256,uint256).rTransferAmount (#1170) is too similar to MJC.takeTeam(address,uint256,uint256,uint256).tTransferAmount (#1184)
Variable MJC._transferToExcluded(address,address,uint256).rTransferAmount (#1199) is too similar to MJC.takeTeam(address,uint256,uint256,uint256).tTransferAmount (#1184)
Variable MJC._transferStandard(address,address,uint256).rTransferAmount (#1159) is too similar to MJC._transferBothExcluded(address,address,uint256).tTransferAmount (#876)
Variable MJC._getValues(uint256).rTransferAmount (#898) is too similar to MJC._transferStandard(address,address,uint256).tTransferAmount (#1159)
Variable MJC._getValues(uint256).rTransferAmount (#898) is too similar to MJC._transferToExcluded(address,address,uint256).tTransferAmount (#1199)
Variable MJC._getValues(uint256).rTransferAmount (#898) is too similar to MJC._getValues(uint256).tTransferAmount (#897)
Variable MJC._transferBothExcluded(address,address,uint256).rTransferAmount (#876) is too similar to MJC._transferStandard(address,address,uint256).tTransferAmount (#1159)
Variable MJC._getValues(uint256).rTransferAmount (#898) is too similar to MJC.takeMarketing(address,uint256,uint256,uint256).tTransferAmount (#1170)
Variable MJC._transferBothExcluded(address,address,uint256).rTransferAmount (#876) is too similar to MJC._getValues(uint256).tTransferAmount (#897)
Variable MJC._getValues(uint256).rTransferAmount (#898) is too similar to MJC._getTValues(uint256).tTransferAmount (#905)
Variable MJC.takeMarketing(address,uint256,uint256,uint256).rTransferAmount (#1170) is too similar to MJC._getValues(uint256).tTransferAmount (#897)
Variable MJC._transferToExcluded(address,address,uint256).rTransferAmount (#1199) is too similar to MJC._transferBothExcluded(address,address,uint256).tTransferAmount (#876)
Variable MJC.reflectionFromToken(uint256,bool).rTransferAmount (#842) is too similar to MJC._transferBothExcluded(address,address,uint256).tTransferAmount (#876)
Variable MJC._getValues(uint256).rTransferAmount (#898) is too similar to MJC._transferFromExcluded(address,address,uint256).tTransferAmount (#1209)
Variable MJC.takeMarketing(address,uint256,uint256,uint256).rTransferAmount (#1170) is too similar to MJC._transferBothExcluded(address,address,uint256).tTransferAmount (#876)
Variable MJC._transferStandard(address,address,uint256).rTransferAmount (#1159) is too similar to MJC._transferStandard(address,address,uint256).tTransferAmount (#1159)
Variable MJC._transferStandard(address,address,uint256).rTransferAmount (#1159) is too similar to MJC._getValues(uint256).tTransferAmount (#897)
Variable MJC._transferFromExcluded(address,address,uint256).rTransferAmount (#1209) is too similar to MJC._transferBothExcluded(address,address,uint256).tTransferAmount (#876)
Variable MJC.takeTeam(address,uint256,uint256,uint256).rTransferAmount (#1184) is too similar to MJC._transferBothExcluded(address,address,uint256).tTransferAmount (#876)
Variable MJC._transferToExcluded(address,address,uint256).rTransferAmount (#1199) is too similar to MJC._transferToExcluded(address,address,uint256).tTransferAmount (#1199)
Variable MJC.reflectionFromToken(uint256,bool).rTransferAmount (#842) is too similar to MJC._transferStandard(address,address,uint256).tTransferAmount (#1159)
Variable MJC._getValues(uint256).rTransferAmount (#898) is too similar to MJC.takeTeam(address,uint256,uint256,uint256).tTransferAmount (#1184)
Variable MJC.takeMarketing(address,uint256,uint256,uint256).rTransferAmount (#1170) is too similar to MJC._transferStandard(address,address,uint256).tTransferAmount (#1159)
Variable MJC._getRValues(uint256,uint256,uint256,uint256).rTransferAmount (#913) is too similar to MJC.takeTeam(address,uint256,uint256,uint256).tTransferAmount (#1184)
Variable MJC._transferStandard(address,address,uint256).rTransferAmount (#1159) is too similar to MJC._transferToExcluded(address,address,uint256).tTransferAmount (#1199)
Variable MJC._transferStandard(address,address,uint256).rTransferAmount (#1159) is too similar to MJC.takeMarketing(address,uint256,uint256,uint256).tTransferAmount (#1170)
Variable MJC._getRValues(uint256,uint256,uint256,uint256).rTransferAmount (#913) is too similar to MJC._transferBothExcluded(address,address,uint256).tTransferAmount (#876)
Variable MJC._transferFromExcluded(address,address,uint256).rTransferAmount (#1209) is too similar to MJC._transferToExcluded(address,address,uint256).tTransferAmount (#1199)
Variable MJC._transferFromExcluded(address,address,uint256).rTransferAmount (#1209) is too similar to MJC.takeMarketing(address,uint256,uint256,uint256).tTransferAmount (#1170)
Variable MJC._transferBothExcluded(address,address,uint256).rTransferAmount (#876) is too similar to MJC._transferFromExcluded(address,address,uint256).tTransferAmount (#1209)
Variable MJC._getRValues(uint256,uint256,uint256,uint256).rTransferAmount (#913) is too similar to MJC._getTValues(uint256).tTransferAmount (#905)
Variable MJC.takeTeam(address,uint256,uint256,uint256).rTransferAmount (#1184) is too similar to MJC.takeTeam(address,uint256,uint256,uint256).tTransferAmount (#1184)
Variable MJC._transferBothExcluded(address,address,uint256).rTransferAmount (#876) is too similar to MJC.takeTeam(address,uint256,uint256,uint256).tTransferAmount (#1184)
Variable MJC._getRValues(uint256,uint256,uint256,uint256).rTransferAmount (#913) is too similar to MJC._getValues(uint256).tTransferAmount (#897)
Variable MJC.takeMarketing(address,uint256,uint256,uint256).rTransferAmount (#1170) is too similar to MJC._transferToExcluded(address,address,uint256).tTransferAmount (#1199)
Variable MJC.takeMarketing(address,uint256,uint256,uint256).rTransferAmount (#1170) is too similar to MJC.takeMarketing(address,uint256,uint256,uint256).tTransferAmount (#1170)
Variable MJC._transferStandard(address,address,uint256).rTransferAmount (#1159) is too similar to MJC._transferFromExcluded(address,address,uint256).tTransferAmount (#1209)
Variable MJC._getRValues(uint256,uint256,uint256,uint256).rTransferAmount (#913) is too similar to MJC._transferStandard(address,address,uint256).tTransferAmount (#1159)
Variable MJC._transferBothExcluded(address,address,uint256).rTransferAmount (#876) is too similar to MJC._getTValues(uint256).tTransferAmount (#905)
Variable MJC._transferStandard(address,address,uint256).rTransferAmount (#1159) is too similar to MJC.takeTeam(address,uint256,uint256,uint256).tTransferAmount (#1184)
Variable MJC._getRValues(uint256,uint256,uint256,uint256).rTransferAmount (#913) is too similar to MJC._transferToExcluded(address,address,uint256).tTransferAmount (#1199)
Variable MJC._getRValues(uint256,uint256,uint256,uint256).rTransferAmount (#913) is too similar to MJC.takeMarketing(address,uint256,uint256,uint256).tTransferAmount (#1170)
Variable MJC._transferFromExcluded(address,address,uint256).rTransferAmount (#1209) is too similar to MJC.takeTeam(address,uint256,uint256,uint256).tTransferAmount (#1184)
Variable MJC._transferStandard(address,address,uint256).rTransferAmount (#1159) is too similar to MJC._getTValues(uint256).tTransferAmount (#905)
Variable MJC.takeTeam(address,uint256,uint256,uint256).rTransferAmount (#1184) is too similar to MJC._transferToExcluded(address,address,uint256).tTransferAmount (#1199)
Variable MJC.takeTeam(address,uint256,uint256,uint256).rTransferAmount (#1184) is too similar to MJC.takeMarketing(address,uint256,uint256,uint256).tTransferAmount (#1170)
Variable MJC._transferBothExcluded(address,address,uint256).rTransferAmount (#876) is too similar to MJC._transferToExcluded(address,address,uint256).tTransferAmount (#1199)
Variable MJC._transferBothExcluded(address,address,uint256).rTransferAmount (#876) is too similar to MJC.takeMarketing(address,uint256,uint256,uint256).tTransferAmount (#1170)
Variable MJC._getRValues(uint256,uint256,uint256,uint256).rTransferAmount (#913) is too similar to MJC._transferFromExcluded(address,address,uint256).tTransferAmount (#1209)
Variable MJC.reflectionFromToken(uint256,bool).rTransferAmount (#842) is too similar to MJC._transferToExcluded(address,address,uint256).tTransferAmount (#1199)
Prevent variables from having similar names.

Additional information: link

MJC.slitherConstructorVariables() (#680-1264) uses literals with too many digits:
- _tTotal = 1000000000 * (10 ** 9) (#696)
MJC.slitherConstructorVariables() (#680-1264) uses literals with too many digits:
- deadAddress = 0x000000000000000000000000000000000000dEaD (#715)
MJC.slitherConstructorVariables() (#680-1264) uses literals with too many digits:
- swapTokensAtAmount = 5000000 * 10 ** 9 (#727)
MJC.slitherConstructorVariables() (#680-1264) uses literals with too many digits:
- _maxTxAmount = 100000000 * 10 ** 9 (#728)
MJC.slitherConstructorVariables() (#680-1264) uses literals with too many digits:
- maxWalletToken = 10000000 * (10 ** 9) (#730)
MJC.slitherConstructorVariables() (#680-1264) uses literals with too many digits:
- maxBuyTransactionAmount = 10000000 * (10 ** 9) (#731)
Use: Ether suffix, Time suffix, or The scientific notation

Additional information: link

MJC.bots (#693) is never used in MJC (#680-1264)
Remove unused state variables.

Additional information: link

MJC._decimals (#702) should be constant
MJC._name (#700) should be constant
MJC._symbol (#701) should be constant
MJC._tTotal (#696) should be constant
MJC.deadAddress (#715) should be constant
Add the constant attributes to state variables that never change.

Additional information: link

renounceOwnership() should be declared external:
- Ownable.renounceOwnership() (#66-69)
transferOwnership(address) should be declared external:
- Ownable.transferOwnership(address) (#75-79)
geUnlockTime() should be declared external:
- Ownable.geUnlockTime() (#81-83)
lock(uint256) should be declared external:
- Ownable.lock(uint256) (#86-91)
unlock() should be declared external:
- Ownable.unlock() (#94-99)
name() should be declared external:
- MJC.name() (#768-770)
symbol() should be declared external:
- MJC.symbol() (#772-774)
decimals() should be declared external:
- MJC.decimals() (#776-778)
totalSupply() should be declared external:
- MJC.totalSupply() (#780-782)
transfer(address,uint256) should be declared external:
- MJC.transfer(address,uint256) (#789-792)
approve(address,uint256) should be declared external:
- MJC.approve(address,uint256) (#798-801)
transferFrom(address,address,uint256) should be declared external:
- MJC.transferFrom(address,address,uint256) (#803-807)
increaseAllowance(address,uint256) should be declared external:
- MJC.increaseAllowance(address,uint256) (#809-812)
decreaseAllowance(address,uint256) should be declared external:
- MJC.decreaseAllowance(address,uint256) (#814-817)
isExcludedFromReward(address) should be declared external:
- MJC.isExcludedFromReward(address) (#819-821)
totalFees() should be declared external:
- MJC.totalFees() (#823-825)
deliver(uint256) should be declared external:
- MJC.deliver(uint256) (#827-834)
reflectionFromToken(uint256,bool) should be declared external:
- MJC.reflectionFromToken(uint256,bool) (#836-845)
excludeFromReward(address) should be declared external:
- MJC.excludeFromReward(address) (#853-860)
isExcludedFromFee(address) should be declared external:
- MJC.isExcludedFromFee(address) (#975-977)
excludeFromFee(address) should be declared external:
- MJC.excludeFromFee(address) (#1218-1220)
includeInFee(address) should be declared external:
- MJC.includeInFee(address) (#1222-1224)
setMaxBuytx(uint256) should be declared external:
- MJC.setMaxBuytx(uint256) (#1250-1252)
setSwapAndLiquifyEnabled(bool) should be declared external:
- MJC.setSwapAndLiquifyEnabled(bool) (#1258-1261)
Use the external attribute for functions never called from the contract.

Additional information: link

Holders:


Token seems to be untradeable: there is no PancakeSwap trading pair and no trading volumes. Ignore for presale.


Number of Binance Smart Chain (BSC) token holders is low.


Unable to find Twitter account


Telegram account has relatively few subscribers


Unable to find Blog account (Reddit or Medium)


Unable to find Youtube account


Unable to find Discord account

Search:


Unable to find website, listings and other project-related information


Young tokens have high risks of scam / price dump / death


Token has no active CoinGecko listing / rank


Token has no active CoinMarketCap listing / rank

Anti-Scam Checks

Price for MJC