Decentralized Crowdsourcing Platform for Investigations, Private Security and Humanitarian Missions
In light of the political climate and the direction the world is taking, it is imperative that there is an outlet for transparency and global welfare. This requires a decentralized platform that cannot be shut down by any authority or special interest group. gotEMs platform brings this demand to reality. With its decentralized crowdsourcing DeFi platform enabling crowdsourcing and crowdfunding for private investigations, private security, and humanitarian missions.
We are on the cusp of a global shift in how people perceive government, safety, money, resources, and the direction of our species. With a fully working prototype ready to launch this month. We anticipate that our movement will change the way people interact and go about their personal lives. Hopefully, it will change the world in a meaningful way that will impact future generations for hundreds of years.
Unable to find manual contract audit (e.g. Certik, PeckShield, Solidity...)
Contract creator or owner is blacklisted for past scams
LERC20._transfer(address,address,uint256) (#323-337) has external calls inside a loop: _botProtection.protect(sender,recipient,amount) (#328)
Favor pull over push strategy for external calls.
Additional information: link
LERC20.allowance(address,address).owner (#290) shadows:
- Ownable.owner() (#34-36) (function)
LERC20._approve(address,address,uint256).owner (#347) shadows:
- Ownable.owner() (#34-36) (function)
Rename the local variables that shadow another component.
Additional information: link
Ownable.constructor().msgSender (#26) lacks a zero-check on :
- _owner = msgSender (#27)
LERC20.constructor(uint256,string,string,address,address,uint256,address).admin_ (#145) lacks a zero-check on :
- admin = admin_ (#149)
LERC20.constructor(uint256,string,string,address,address,uint256,address).recoveryAdmin_ (#145) lacks a zero-check on :
- recoveryAdmin = recoveryAdmin_ (#150)
LERC20.setLosslessAdmin(address).newAdmin (#225) lacks a zero-check on :
- admin = newAdmin (#227)
LERC20.transferRecoveryAdminOwnership(address,bytes32).candidate (#230) lacks a zero-check on :
- recoveryAdminCanditate = candidate (#231)
Check that the address is not zero.
Additional information: link
Reentrancy in LERC20._transfer(address,address,uint256) (#323-337):
External calls:
- _botProtection.protect(sender,recipient,amount) (#328)
State variables written after the call(s):
- _balances[sender] = senderBalance - amount (#333)
- _balances[recipient] += amount (#334)
Reentrancy in LERC20.approve(address,uint256) (#294-298):
External calls:
- lssAprove(spender,amount) (#294)
- lossless.beforeApprove(_msgSender(),spender,amount) (#159)
- lossless.afterApprove(_msgSender(),spender,amount) (#161)
State variables written after the call(s):
- _approve(_msgSender(),spender,amount) (#296)
- _allowances[owner][spender] = amount (#351)
Reentrancy in LERC20.decreaseAllowance(address,uint256) (#315-321):
External calls:
- lssDecreaseAllowance(spender,subtractedValue) (#315)
- lossless.beforeDecreaseAllowance(_msgSender(),spender,subtractedValue) (#199)
- lossless.afterDecreaseAllowance(_msgSender(),spender,subtractedValue) (#201)
State variables written after the call(s):
- _approve(_msgSender(),spender,currentAllowance - subtractedValue) (#318)
- _allowances[owner][spender] = amount (#351)
Reentrancy in LERC20.increaseAllowance(address,uint256) (#310-313):
External calls:
- lssIncreaseAllowance(spender,addedValue) (#310)
- lossless.beforeIncreaseAllowance(_msgSender(),spender,addedValue) (#189)
- lossless.afterIncreaseAllowance(_msgSender(),spender,addedValue) (#191)
State variables written after the call(s):
- _approve(_msgSender(),spender,_allowances[_msgSender()][spender] + addedValue) (#311)
- _allowances[owner][spender] = amount (#351)
Reentrancy in LERC20.transferFrom(address,address,uint256) (#300-308):
External calls:
- _transfer(sender,recipient,amount) (#301)
- _botProtection.protect(sender,recipient,amount) (#328)
- lssTransferFrom(sender,recipient,amount) (#300)
- lossless.beforeTransferFrom(_msgSender(),sender,recipient,amount) (#179)
- lossless.afterTransferFrom(_msgSender(),sender,recipient,amount) (#181)
State variables written after the call(s):
- _approve(sender,_msgSender(),currentAllowance - amount) (#305)
- _allowances[owner][spender] = amount (#351)
Apply the check-effects-interactions pattern.
Additional information: link
Reentrancy in LERC20._transfer(address,address,uint256) (#323-337):
External calls:
- _botProtection.protect(sender,recipient,amount) (#328)
Event emitted after the call(s):
- Transfer(sender,recipient,amount) (#336)
Reentrancy in LERC20.approve(address,uint256) (#294-298):
External calls:
- lssAprove(spender,amount) (#294)
- lossless.beforeApprove(_msgSender(),spender,amount) (#159)
- lossless.afterApprove(_msgSender(),spender,amount) (#161)
Event emitted after the call(s):
- Approval(owner,spender,amount) (#352)
- _approve(_msgSender(),spender,amount) (#296)
Reentrancy in LERC20.decreaseAllowance(address,uint256) (#315-321):
External calls:
- lssDecreaseAllowance(spender,subtractedValue) (#315)
- lossless.beforeDecreaseAllowance(_msgSender(),spender,subtractedValue) (#199)
- lossless.afterDecreaseAllowance(_msgSender(),spender,subtractedValue) (#201)
Event emitted after the call(s):
- Approval(owner,spender,amount) (#352)
- _approve(_msgSender(),spender,currentAllowance - subtractedValue) (#318)
Reentrancy in LERC20.increaseAllowance(address,uint256) (#310-313):
External calls:
- lssIncreaseAllowance(spender,addedValue) (#310)
- lossless.beforeIncreaseAllowance(_msgSender(),spender,addedValue) (#189)
- lossless.afterIncreaseAllowance(_msgSender(),spender,addedValue) (#191)
Event emitted after the call(s):
- Approval(owner,spender,amount) (#352)
- _approve(_msgSender(),spender,_allowances[_msgSender()][spender] + addedValue) (#311)
Reentrancy in LERC20.transfer(address,uint256) (#285-288):
External calls:
- _transfer(_msgSender(),recipient,amount) (#286)
- _botProtection.protect(sender,recipient,amount) (#328)
- lssTransfer(recipient,amount) (#285)
- lossless.beforeTransfer(_msgSender(),recipient,amount) (#169)
- lossless.afterTransfer(_msgSender(),recipient,amount) (#171)
Event emitted after the call(s):
- Transfer(sender,recipient,amount) (#336)
- _transfer(_msgSender(),recipient,amount) (#286)
Reentrancy in LERC20.transferFrom(address,address,uint256) (#300-308):
External calls:
- _transfer(sender,recipient,amount) (#301)
- _botProtection.protect(sender,recipient,amount) (#328)
- lssTransferFrom(sender,recipient,amount) (#300)
- lossless.beforeTransferFrom(_msgSender(),sender,recipient,amount) (#179)
- lossless.afterTransferFrom(_msgSender(),sender,recipient,amount) (#181)
Event emitted after the call(s):
- Approval(owner,spender,amount) (#352)
- _approve(sender,_msgSender(),currentAllowance - amount) (#305)
- Transfer(sender,recipient,amount) (#336)
- _transfer(sender,recipient,amount) (#301)
Apply the check-effects-interactions pattern.
Additional information: link
LERC20.executeLosslessTurnOff() (#249-255) uses timestamp for comparisons
Dangerous comparisons:
- require(bool,string)(losslessTurnOffTimestamp <= block.timestamp,LERC20: Time lock in progress) (#251)
Avoid relying on block.timestamp.
Additional information: link
LERC20.setBotProtectionDisableForever() (#365-368) compares to a boolean constant:
-require(bool)(BPDisabledForever == false) (#366)
Remove the equality to the boolean constant.
Additional information: link
Context._msgData() (#9-12) is never used and should be removed
Remove unused functions.
Additional information: link
Pragma version^0.8.0 (#2) allows old versions
Deploy with any of the following Solidity versions: 0.5.16 - 0.5.17, 0.6.11 - 0.6.12, 0.7.5 - 0.7.6 Use a simple pragma version that allows any of these versions. Consider using the latest version of Solidity for testing.
Additional information: link
Parameter LERC20.setBPAddress(address)._bp (#356) is not in mixedCase
Parameter LERC20.setBpEnabled(bool)._enabled (#361) is not in mixedCase
Variable LERC20.BPEnabled (#133) is not in mixedCase
Variable LERC20.BPDisabledForever (#135) is not in mixedCase
Follow the Solidity naming convention.
Additional information: link
Redundant expression "this (#10)" inContext (#4-13)
Remove redundant statements if they congest code but offer no value.
Additional information: link
Variable LERC20._totalSupply (#118) is too similar to LERC20.constructor(uint256,string,string,address,address,uint256,address).totalSupply_ (#145)
Prevent variables from having similar names.
Additional information: link
Ownable._previousOwner (#17) is never used in LERC20 (#115-372)
Ownable._lockTime (#18) is never used in LERC20 (#115-372)
Remove unused state variables.
Additional information: link
Ownable._lockTime (#18) should be constant
Ownable._previousOwner (#17) should be constant
Add the constant attributes to state variables that never change.
Additional information: link
owner() should be declared external:
- Ownable.owner() (#34-36)
renounceOwnership() should be declared external:
- Ownable.renounceOwnership() (#53-56)
transferOwnership(address) should be declared external:
- Ownable.transferOwnership(address) (#62-66)
setLosslessAdmin(address) should be declared external:
- LERC20.setLosslessAdmin(address) (#225-228)
transferRecoveryAdminOwnership(address,bytes32) should be declared external:
- LERC20.transferRecoveryAdminOwnership(address,bytes32) (#230-234)
proposeLosslessTurnOff() should be declared external:
- LERC20.proposeLosslessTurnOff() (#243-247)
executeLosslessTurnOff() should be declared external:
- LERC20.executeLosslessTurnOff() (#249-255)
executeLosslessTurnOn() should be declared external:
- LERC20.executeLosslessTurnOn() (#257-261)
name() should be declared external:
- LERC20.name() (#265-267)
symbol() should be declared external:
- LERC20.symbol() (#269-271)
decimals() should be declared external:
- LERC20.decimals() (#273-275)
totalSupply() should be declared external:
- LERC20.totalSupply() (#277-279)
transfer(address,uint256) should be declared external:
- LERC20.transfer(address,uint256) (#285-288)
allowance(address,address) should be declared external:
- LERC20.allowance(address,address) (#290-292)
approve(address,uint256) should be declared external:
- LERC20.approve(address,uint256) (#294-298)
transferFrom(address,address,uint256) should be declared external:
- LERC20.transferFrom(address,address,uint256) (#300-308)
increaseAllowance(address,uint256) should be declared external:
- LERC20.increaseAllowance(address,uint256) (#310-313)
decreaseAllowance(address,uint256) should be declared external:
- LERC20.decreaseAllowance(address,uint256) (#315-321)
Use the external attribute for functions never called from the contract.
Additional information: link
Average 30d PancakeSwap volume is low.
Average PancakeSwap trading volume, liqudity, number of swaps are low. Token seems to be inactive.
Token is deployed only at one blockchain
Unable to find PancakeSwap trading pair to compute liquidity.
Unable to find PancakeSwap trading pair to compute number of swaps.
BscScan page for the token does not contain additional info: website, socials, description, etc.
Additional information: link
Unable to find token contract audit
Unable to verify token contract address on the website
Unable to find audit link on the website
Unable to find token on CoinHunt
Additional information: link
Token is marked as scam (rug pull, honeypot, phishing, etc.)
Additional information: link
Young tokens have high risks of price dump / death
Young tokens have high risks of scam / price dump / death
Young tokens have high risks of price dump / death
Token has relatively low CoinGecko rank
Token has relatively low CoinMarketCap rank
Last post in Twitter was more than 30 days ago
Unable to find Youtube account
Unable to find Discord account