GODV [Go Driving] Token

BuybackBabyToken.swapBack() (#1265-1320) sends eth to arbitrary user
Dangerous calls:
- distributor.deposit{value: amountBNBReflection}() (#1306)
- address(marketingFeeReceiver).transfer(amountBNBMarketing) (#1307)
- router.addLiquidityETH{value: amountBNBLiquidity}(address(this),amountToLiquify,0,0,autoLiquidityReceiver,block.timestamp) (#1310-1317)
BuybackBabyToken.buyTokens(uint256,address) (#1355-1363) sends eth to arbitrary user
Dangerous calls:
- router.swapExactETHForTokensSupportingFeeOnTransferTokens{value: amount}(0,path,to,block.timestamp) (#1360-1362)
Ensure that an arbitrary user cannot withdraw unauthorized funds.

Additional information: link

Reentrancy in BuybackBabyToken._transferFrom(address,address,uint256) (#1155-1195):
External calls:
- swapBack() (#1165)
- router.swapExactTokensForETHSupportingFeeOnTransferTokens(amountToSwap,0,path,address(this),block.timestamp) (#1283-1289)
- distributor.deposit{value: amountBNBReflection}() (#1306)
- router.addLiquidityETH{value: amountBNBLiquidity}(address(this),amountToLiquify,0,0,autoLiquidityReceiver,block.timestamp) (#1310-1317)
- triggerAutoBuyback() (#1168)
- router.swapExactETHForTokensSupportingFeeOnTransferTokens{value: amount}(0,path,to,block.timestamp) (#1360-1362)
External calls sending eth:
- swapBack() (#1165)
- distributor.deposit{value: amountBNBReflection}() (#1306)
- address(marketingFeeReceiver).transfer(amountBNBMarketing) (#1307)
- router.addLiquidityETH{value: amountBNBLiquidity}(address(this),amountToLiquify,0,0,autoLiquidityReceiver,block.timestamp) (#1310-1317)
- triggerAutoBuyback() (#1168)
- router.swapExactETHForTokensSupportingFeeOnTransferTokens{value: amount}(0,path,to,block.timestamp) (#1360-1362)
State variables written after the call(s):
- _balances[sender] = _balances[sender].sub(amount,Insufficient Balance) (#1171-1174)
- _balances[recipient] = _balances[recipient].add(amountReceived) (#1180)
- amountReceived = takeFee(sender,recipient,amount) (#1176-1178)
- _balances[address(this)] = _balances[address(this)].add(feeAmount) (#1251)
- triggerAutoBuyback() (#1168)
- inSwap = true (#1006)
- inSwap = false (#1008)
Apply the check-effects-interactions pattern.

Additional information: link

DividendDistributor.distributeDividend(address) (#837-854) ignores return value by rewardToken.transfer(shareholder,amount) (#845)
Use SafeERC20, or ensure that the transfer/transferFrom return value is checked.

Additional information: link

Combination 1: Reentrancy vulnerabilities + Functions that send Ether to arbitraty destination. Usual for scams. May be justified by some complex mechanics (e.g. rebase, reflections). DYOR & manual audit are advised.

Combination 2: Unchecked transfer + Functions that send Ether to arbitraty destination. Usual for scams. May be justified by some complex mechanics (e.g. rebase, reflections). DYOR & manual audit are advised.

Combination 3: Reentrancy vulnerabilities + Unchecked transfer vulnerability. Usual for scams. May be justified by some complex mechanics (e.g. rebase, reflections). DYOR & manual audit are advised.

Unable to verify that contract auditor is trusted: Certik, Quantstamp, Hacken, Solidity, Paladinsec, Openzeppelin, Verichains

Reentrancy in DividendDistributor.distributeDividend(address) (#837-854):
External calls:
- rewardToken.transfer(shareholder,amount) (#845)
State variables written after the call(s):
- shares[shareholder].totalRealised = shares[shareholder].totalRealised.add(amount) (#847-849)
- shares[shareholder].totalExcluded = getCumulativeDividends(shares[shareholder].amount) (#850-852)
Reentrancy in DividendDistributor.process(uint256) (#799-825):
External calls:
- distributeDividend(shareholders[currentIndex]) (#817)
- rewardToken.transfer(shareholder,amount) (#845)
State variables written after the call(s):
- currentIndex ++ (#822)
Reentrancy in DividendDistributor.setShare(address,uint256) (#756-776):
External calls:
- distributeDividend(shareholder) (#762)
- rewardToken.transfer(shareholder,amount) (#845)
State variables written after the call(s):
- shares[shareholder].amount = amount (#772)
- shares[shareholder].totalExcluded = getCumulativeDividends(shares[shareholder].amount) (#773-775)
Apply the check-effects-interactions pattern.

Additional information: link

BuybackBabyToken.swapBack() (#1265-1320) ignores return value by router.addLiquidityETH{value: amountBNBLiquidity}(address(this),amountToLiquify,0,0,autoLiquidityReceiver,block.timestamp) (#1310-1317)
Ensure that all the return values of the function calls are used.

Additional information: link

DividendDistributor.setDistributionCriteria(uint256,uint256) (#748-754) should emit an event for:
- minPeriod = _minPeriod (#752)
- minDistribution = _minDistribution (#753)
BuybackBabyToken.setAutoBuybackSettings(bool,uint256,uint256,uint256) (#1365-1377) should emit an event for:
- autoBuybackCap = _cap (#1372)
- autoBuybackAmount = _amount (#1374)
BuybackBabyToken.setBuybackMultiplierSettings(uint256,uint256,uint256) (#1379-1388) should emit an event for:
- buybackMultiplierNumerator = numerator (#1385)
- buybackMultiplierDenominator = denominator (#1386)
- buybackMultiplierLength = length (#1387)
BuybackBabyToken.setSwapBackSettings(bool,uint256) (#1456-1462) should emit an event for:
- swapThreshold = _amount (#1461)
BuybackBabyToken.setTargetLiquidity(uint256,uint256) (#1464-1470) should emit an event for:
- targetLiquidity = _target (#1468)
- targetLiquidityDenominator = _denominator (#1469)
Emit an event for critical parameter changes.

Additional information: link

Auth.transferOwnership(address).adr (#664) lacks a zero-check on :
- owner = adr (#665)
BuybackBabyToken.constructor(string,string,uint256,address,address,uint256[5],address,uint256).rewardToken_ (#1020) lacks a zero-check on :
- rewardToken = rewardToken_ (#1030)
BuybackBabyToken.constructor(string,string,uint256,address,address,uint256[5],address,uint256).serviceFeeReceiver_ (#1023) lacks a zero-check on :
- address(serviceFeeReceiver_).transfer(serviceFee_) (#1067)
BuybackBabyToken.setFeeReceivers(address,address)._autoLiquidityReceiver (#1449) lacks a zero-check on :
- autoLiquidityReceiver = _autoLiquidityReceiver (#1452)
BuybackBabyToken.setFeeReceivers(address,address)._marketingFeeReceiver (#1450) lacks a zero-check on :
- marketingFeeReceiver = _marketingFeeReceiver (#1453)
Check that the address is not zero.

Additional information: link

DividendDistributor.distributeDividend(address) (#837-854) has external calls inside a loop: rewardToken.transfer(shareholder,amount) (#845)
Favor pull over push strategy for external calls.

Additional information: link

Reentrancy in BuybackBabyToken.constructor(string,string,uint256,address,address,uint256[5],address,uint256) (#1016-1068):
External calls:
- pair = IUniswapV2Factory(router.factory()).createPair(address(this),router.WETH()) (#1032-1035)
State variables written after the call(s):
- _allowances[address(this)][address(router)] = _totalSupply (#1054)
- _allowances[address(this)][address(pair)] = _totalSupply (#1055)
- _balances[msg.sender] = _totalSupply (#1057)
- autoLiquidityReceiver = msg.sender (#1051)
- buyBacker[msg.sender] = true (#1049)
- _initializeFees(feeSettings_) (#1038)
- buybackFee = _buybackFee (#1435)
- _initializeLiquidityBuyBack() (#1039)
- buybackMultiplierDenominator = 100 (#1085)
- _initializeLiquidityBuyBack() (#1039)
- buybackMultiplierLength = 1800 (#1086)
- _initializeLiquidityBuyBack() (#1039)
- buybackMultiplierNumerator = 200 (#1084)
- distributor = new DividendDistributor(rewardToken_,router_) (#1036)
- distributorGas = 500000 (#1041)
- _initializeFees(feeSettings_) (#1038)
- feeDenominator = _feeDenominator (#1441)
- isDividendExempt[pair] = true (#1046)
- isDividendExempt[address(this)] = true (#1047)
- isDividendExempt[DEAD] = true (#1048)
- isFeeExempt[msg.sender] = true (#1045)
- _initializeFees(feeSettings_) (#1038)
- liquidityFee = _liquidityFee (#1434)
- _initializeFees(feeSettings_) (#1038)
- marketingFee = _marketingFee (#1437)
- marketingFeeReceiver = msg.sender (#1052)
- _initializeFees(feeSettings_) (#1038)
- reflectionFee = _reflectionFee (#1436)
- swapEnabled = true (#1042)
- swapThreshold = _totalSupply / 20000 (#1043)
- _initializeLiquidityBuyBack() (#1039)
- targetLiquidity = 25 (#1081)
- _initializeLiquidityBuyBack() (#1039)
- targetLiquidityDenominator = 100 (#1082)
- _initializeFees(feeSettings_) (#1038)
- totalFee = _liquidityFee.add(_buybackFee).add(_reflectionFee).add(_marketingFee) (#1438-1440)
Reentrancy in DividendDistributor.deposit() (#778-797):
External calls:
- router.swapExactETHForTokensSupportingFeeOnTransferTokens{value: msg.value}(0,path,address(this),block.timestamp) (#785-787)
State variables written after the call(s):
- dividendsPerShare = dividendsPerShare.add(dividendsPerShareAccuracyFactor.mul(amount).div(totalShares)) (#794-796)
- totalDividends = totalDividends.add(amount) (#793)
Reentrancy in DividendDistributor.distributeDividend(address) (#837-854):
External calls:
- rewardToken.transfer(shareholder,amount) (#845)
State variables written after the call(s):
- shareholderClaims[shareholder] = block.timestamp (#846)
Reentrancy in DividendDistributor.setShare(address,uint256) (#756-776):
External calls:
- distributeDividend(shareholder) (#762)
- rewardToken.transfer(shareholder,amount) (#845)
State variables written after the call(s):
- addShareholder(shareholder) (#766)
- shareholderIndexes[shareholder] = shareholders.length (#891)
- removeShareholder(shareholder) (#768)
- shareholderIndexes[shareholders[shareholders.length - 1]] = shareholderIndexes[shareholder] (#899-901)
- addShareholder(shareholder) (#766)
- shareholders.push(shareholder) (#892)
- removeShareholder(shareholder) (#768)
- shareholders[shareholderIndexes[shareholder]] = shareholders[shareholders.length - 1] (#896-898)
- shareholders.pop() (#902)
- totalShares = totalShares.sub(shares[shareholder].amount).add(amount) (#771)
Reentrancy in BuybackBabyToken.triggerAutoBuyback() (#1346-1353):
External calls:
- buyTokens(autoBuybackAmount,DEAD) (#1347)
- router.swapExactETHForTokensSupportingFeeOnTransferTokens{value: amount}(0,path,to,block.timestamp) (#1360-1362)
State variables written after the call(s):
- autoBuybackAccumulator = autoBuybackAccumulator.add(autoBuybackAmount) (#1349)
- autoBuybackBlockLast = block.number (#1348)
- autoBuybackEnabled = false (#1351)
Reentrancy in BuybackBabyToken.triggerZeusBuyback(uint256,bool) (#1331-1340):
External calls:
- buyTokens(amount,DEAD) (#1335)
- router.swapExactETHForTokensSupportingFeeOnTransferTokens{value: amount}(0,path,to,block.timestamp) (#1360-1362)
State variables written after the call(s):
- buybackMultiplierTriggeredAt = block.timestamp (#1337)
Apply the check-effects-interactions pattern.

Additional information: link

Reentrancy in BuybackBabyToken._transferFrom(address,address,uint256) (#1155-1195):
External calls:
- swapBack() (#1165)
- router.swapExactTokensForETHSupportingFeeOnTransferTokens(amountToSwap,0,path,address(this),block.timestamp) (#1283-1289)
- distributor.deposit{value: amountBNBReflection}() (#1306)
- router.addLiquidityETH{value: amountBNBLiquidity}(address(this),amountToLiquify,0,0,autoLiquidityReceiver,block.timestamp) (#1310-1317)
- triggerAutoBuyback() (#1168)
- router.swapExactETHForTokensSupportingFeeOnTransferTokens{value: amount}(0,path,to,block.timestamp) (#1360-1362)
- distributor.setShare(sender,_balances[sender]) (#1183)
- distributor.setShare(recipient,_balances[recipient]) (#1186-1188)
- distributor.process(distributorGas) (#1191)
External calls sending eth:
- swapBack() (#1165)
- distributor.deposit{value: amountBNBReflection}() (#1306)
- address(marketingFeeReceiver).transfer(amountBNBMarketing) (#1307)
- router.addLiquidityETH{value: amountBNBLiquidity}(address(this),amountToLiquify,0,0,autoLiquidityReceiver,block.timestamp) (#1310-1317)
- triggerAutoBuyback() (#1168)
- router.swapExactETHForTokensSupportingFeeOnTransferTokens{value: amount}(0,path,to,block.timestamp) (#1360-1362)
Event emitted after the call(s):
- Transfer(sender,recipient,amountReceived) (#1193)
Reentrancy in BuybackBabyToken._transferFrom(address,address,uint256) (#1155-1195):
External calls:
- swapBack() (#1165)
- router.swapExactTokensForETHSupportingFeeOnTransferTokens(amountToSwap,0,path,address(this),block.timestamp) (#1283-1289)
- distributor.deposit{value: amountBNBReflection}() (#1306)
- router.addLiquidityETH{value: amountBNBLiquidity}(address(this),amountToLiquify,0,0,autoLiquidityReceiver,block.timestamp) (#1310-1317)
- triggerAutoBuyback() (#1168)
- router.swapExactETHForTokensSupportingFeeOnTransferTokens{value: amount}(0,path,to,block.timestamp) (#1360-1362)
External calls sending eth:
- swapBack() (#1165)
- distributor.deposit{value: amountBNBReflection}() (#1306)
- address(marketingFeeReceiver).transfer(amountBNBMarketing) (#1307)
- router.addLiquidityETH{value: amountBNBLiquidity}(address(this),amountToLiquify,0,0,autoLiquidityReceiver,block.timestamp) (#1310-1317)
- triggerAutoBuyback() (#1168)
- router.swapExactETHForTokensSupportingFeeOnTransferTokens{value: amount}(0,path,to,block.timestamp) (#1360-1362)
Event emitted after the call(s):
- Transfer(sender,address(this),feeAmount) (#1252)
- amountReceived = takeFee(sender,recipient,amount) (#1176-1178)
Reentrancy in BuybackBabyToken.constructor(string,string,uint256,address,address,uint256[5],address,uint256) (#1016-1068):
External calls:
- pair = IUniswapV2Factory(router.factory()).createPair(address(this),router.WETH()) (#1032-1035)
Event emitted after the call(s):
- TokenCreated(msg.sender,address(this),TokenType.buybackBaby,VERSION) (#1060-1065)
- Transfer(address(0),msg.sender,_totalSupply) (#1058)
Reentrancy in BuybackBabyToken.swapBack() (#1265-1320):
External calls:
- router.swapExactTokensForETHSupportingFeeOnTransferTokens(amountToSwap,0,path,address(this),block.timestamp) (#1283-1289)
- distributor.deposit{value: amountBNBReflection}() (#1306)
- router.addLiquidityETH{value: amountBNBLiquidity}(address(this),amountToLiquify,0,0,autoLiquidityReceiver,block.timestamp) (#1310-1317)
External calls sending eth:
- distributor.deposit{value: amountBNBReflection}() (#1306)
- address(marketingFeeReceiver).transfer(amountBNBMarketing) (#1307)
- router.addLiquidityETH{value: amountBNBLiquidity}(address(this),amountToLiquify,0,0,autoLiquidityReceiver,block.timestamp) (#1310-1317)
Event emitted after the call(s):
- AutoLiquify(amountBNBLiquidity,amountToLiquify) (#1318)
Reentrancy in BuybackBabyToken.triggerZeusBuyback(uint256,bool) (#1331-1340):
External calls:
- buyTokens(amount,DEAD) (#1335)
- router.swapExactETHForTokensSupportingFeeOnTransferTokens{value: amount}(0,path,to,block.timestamp) (#1360-1362)
Event emitted after the call(s):
- BuybackMultiplierActive(buybackMultiplierLength) (#1338)
Apply the check-effects-interactions pattern.

Additional information: link

DividendDistributor.shouldDistribute(address) (#827-835) uses timestamp for comparisons
Dangerous comparisons:
- shareholderClaims[shareholder] + minPeriod < block.timestamp && getUnpaidEarnings(shareholder) > minDistribution (#832-834)
BuybackBabyToken.getMultipliedFee() (#1222-1240) uses timestamp for comparisons
Dangerous comparisons:
- buybackMultiplierTriggeredAt.add(buybackMultiplierLength) > block.timestamp (#1224-1225)
BuybackBabyToken.shouldSwapBack() (#1257-1263) uses timestamp for comparisons
Dangerous comparisons:
- msg.sender != pair && ! inSwap && swapEnabled && _balances[address(this)] >= swapThreshold (#1258-1262)
BuybackBabyToken.isOverLiquified(uint256,uint256) (#1496-1502) uses timestamp for comparisons
Dangerous comparisons:
- getLiquidityBacking(accuracy) > target (#1501)
Avoid relying on block.timestamp.

Additional information: link

Clones.clone(address) (#255-264) uses assembly
- INLINE ASM (#256-262)
Clones.cloneDeterministic(address,bytes32) (#273-282) uses assembly
- INLINE ASM (#274-280)
Clones.predictDeterministicAddress(address,bytes32,address) (#287-302) uses assembly
- INLINE ASM (#292-301)
Do not use evm assembly.

Additional information: link

BuybackBabyToken.onlyBuybacker() (#1011-1014) compares to a boolean constant:
-require(bool,string)(buyBacker[msg.sender] == true,Not a buybacker) (#1012)
Remove the equality to the boolean constant.

Additional information: link

DividendDistributor.process(uint256) (#799-825) has costly operations inside a loop:
- currentIndex = 0 (#813)
DividendDistributor.distributeDividend(address) (#837-854) has costly operations inside a loop:
- totalDistributed = totalDistributed.add(amount) (#844)
DividendDistributor.process(uint256) (#799-825) has costly operations inside a loop:
- currentIndex ++ (#822)
Use a local variable to hold the loop computation result.

Additional information: link

Clones.clone(address) (#255-264) is never used and should be removed
Clones.cloneDeterministic(address,bytes32) (#273-282) is never used and should be removed
Clones.predictDeterministicAddress(address,bytes32) (#307-313) is never used and should be removed
Clones.predictDeterministicAddress(address,bytes32,address) (#287-302) is never used and should be removed
SafeMath.div(uint256,uint256,string) (#192-201) is never used and should be removed
SafeMath.mod(uint256,uint256) (#152-154) is never used and should be removed
SafeMath.mod(uint256,uint256,string) (#218-227) is never used and should be removed
SafeMath.tryAdd(uint256,uint256) (#23-29) is never used and should be removed
SafeMath.tryDiv(uint256,uint256) (#65-70) is never used and should be removed
SafeMath.tryMod(uint256,uint256) (#77-82) is never used and should be removed
SafeMath.tryMul(uint256,uint256) (#48-58) is never used and should be removed
SafeMath.trySub(uint256,uint256) (#36-41) is never used and should be removed
Remove unused functions.

Additional information: link

Function IUniswapV2Router01.WETH() (#359) is not in mixedCase
Parameter DividendDistributor.setDistributionCriteria(uint256,uint256)._minPeriod (#749) is not in mixedCase
Parameter DividendDistributor.setDistributionCriteria(uint256,uint256)._minDistribution (#750) is not in mixedCase
Variable DividendDistributor._token (#698) is not in mixedCase
Parameter BuybackBabyToken.setAutoBuybackSettings(bool,uint256,uint256,uint256)._enabled (#1366) is not in mixedCase
Parameter BuybackBabyToken.setAutoBuybackSettings(bool,uint256,uint256,uint256)._cap (#1367) is not in mixedCase
Parameter BuybackBabyToken.setAutoBuybackSettings(bool,uint256,uint256,uint256)._amount (#1368) is not in mixedCase
Parameter BuybackBabyToken.setAutoBuybackSettings(bool,uint256,uint256,uint256)._period (#1369) is not in mixedCase
Parameter BuybackBabyToken.setFees(uint256,uint256,uint256,uint256,uint256)._liquidityFee (#1412) is not in mixedCase
Parameter BuybackBabyToken.setFees(uint256,uint256,uint256,uint256,uint256)._buybackFee (#1413) is not in mixedCase
Parameter BuybackBabyToken.setFees(uint256,uint256,uint256,uint256,uint256)._reflectionFee (#1414) is not in mixedCase
Parameter BuybackBabyToken.setFees(uint256,uint256,uint256,uint256,uint256)._marketingFee (#1415) is not in mixedCase
Parameter BuybackBabyToken.setFees(uint256,uint256,uint256,uint256,uint256)._feeDenominator (#1416) is not in mixedCase
Parameter BuybackBabyToken.setFeeReceivers(address,address)._autoLiquidityReceiver (#1449) is not in mixedCase
Parameter BuybackBabyToken.setFeeReceivers(address,address)._marketingFeeReceiver (#1450) is not in mixedCase
Parameter BuybackBabyToken.setSwapBackSettings(bool,uint256)._enabled (#1456) is not in mixedCase
Parameter BuybackBabyToken.setSwapBackSettings(bool,uint256)._amount (#1456) is not in mixedCase
Parameter BuybackBabyToken.setTargetLiquidity(uint256,uint256)._target (#1464) is not in mixedCase
Parameter BuybackBabyToken.setTargetLiquidity(uint256,uint256)._denominator (#1464) is not in mixedCase
Parameter BuybackBabyToken.setDistributionCriteria(uint256,uint256)._minPeriod (#1473) is not in mixedCase
Parameter BuybackBabyToken.setDistributionCriteria(uint256,uint256)._minDistribution (#1474) is not in mixedCase
Constant BuybackBabyToken._decimals (#952) is not in UPPER_CASE_WITH_UNDERSCORES
Follow the Solidity naming convention.

Additional information: link

Reentrancy in BuybackBabyToken._transferFrom(address,address,uint256) (#1155-1195):
External calls:
- swapBack() (#1165)
- address(marketingFeeReceiver).transfer(amountBNBMarketing) (#1307)
External calls sending eth:
- swapBack() (#1165)
- distributor.deposit{value: amountBNBReflection}() (#1306)
- address(marketingFeeReceiver).transfer(amountBNBMarketing) (#1307)
- router.addLiquidityETH{value: amountBNBLiquidity}(address(this),amountToLiquify,0,0,autoLiquidityReceiver,block.timestamp) (#1310-1317)
- triggerAutoBuyback() (#1168)
- router.swapExactETHForTokensSupportingFeeOnTransferTokens{value: amount}(0,path,to,block.timestamp) (#1360-1362)
State variables written after the call(s):
- _balances[sender] = _balances[sender].sub(amount,Insufficient Balance) (#1171-1174)
- _balances[recipient] = _balances[recipient].add(amountReceived) (#1180)
- amountReceived = takeFee(sender,recipient,amount) (#1176-1178)
- _balances[address(this)] = _balances[address(this)].add(feeAmount) (#1251)
- triggerAutoBuyback() (#1168)
- autoBuybackAccumulator = autoBuybackAccumulator.add(autoBuybackAmount) (#1349)
- triggerAutoBuyback() (#1168)
- autoBuybackBlockLast = block.number (#1348)
- triggerAutoBuyback() (#1168)
- autoBuybackEnabled = false (#1351)
- triggerAutoBuyback() (#1168)
- inSwap = true (#1006)
- inSwap = false (#1008)
Event emitted after the call(s):
- Transfer(sender,address(this),feeAmount) (#1252)
- amountReceived = takeFee(sender,recipient,amount) (#1176-1178)
- Transfer(sender,recipient,amountReceived) (#1193)
Reentrancy in BuybackBabyToken.swapBack() (#1265-1320):
External calls:
- address(marketingFeeReceiver).transfer(amountBNBMarketing) (#1307)
External calls sending eth:
- distributor.deposit{value: amountBNBReflection}() (#1306)
- address(marketingFeeReceiver).transfer(amountBNBMarketing) (#1307)
- router.addLiquidityETH{value: amountBNBLiquidity}(address(this),amountToLiquify,0,0,autoLiquidityReceiver,block.timestamp) (#1310-1317)
Event emitted after the call(s):
- AutoLiquify(amountBNBLiquidity,amountToLiquify) (#1318)
Apply the check-effects-interactions pattern.

Additional information: link

Variable IUniswapV2Router01.addLiquidity(address,address,uint256,uint256,uint256,uint256,address,uint256).amountADesired (#364) is too similar to IUniswapV2Router01.addLiquidity(address,address,uint256,uint256,uint256,uint256,address,uint256).amountBDesired (#365)
Variable BuybackBabyToken._totalSupply (#956) is too similar to BuybackBabyToken.constructor(string,string,uint256,address,address,uint256[5],address,uint256).totalSupply_ (#1019)
Prevent variables from having similar names.

Additional information: link

Clones.clone(address) (#255-264) uses literals with too many digits:
- mstore(uint256,uint256)(ptr_clone_asm_0,0x3d602d80600a3d3981f3363d3d373d3d3d363d73000000000000000000000000) (#258)
Clones.clone(address) (#255-264) uses literals with too many digits:
- mstore(uint256,uint256)(ptr_clone_asm_0 + 0x28,0x5af43d82803e903d91602b57fd5bf30000000000000000000000000000000000) (#260)
Clones.cloneDeterministic(address,bytes32) (#273-282) uses literals with too many digits:
- mstore(uint256,uint256)(ptr_cloneDeterministic_asm_0,0x3d602d80600a3d3981f3363d3d373d3d3d363d73000000000000000000000000) (#276)
Clones.cloneDeterministic(address,bytes32) (#273-282) uses literals with too many digits:
- mstore(uint256,uint256)(ptr_cloneDeterministic_asm_0 + 0x28,0x5af43d82803e903d91602b57fd5bf30000000000000000000000000000000000) (#278)
Clones.predictDeterministicAddress(address,bytes32,address) (#287-302) uses literals with too many digits:
- mstore(uint256,uint256)(ptr_predictDeterministicAddress_asm_0,0x3d602d80600a3d3981f3363d3d373d3d3d363d73000000000000000000000000) (#294)
Clones.predictDeterministicAddress(address,bytes32,address) (#287-302) uses literals with too many digits:
- mstore(uint256,uint256)(ptr_predictDeterministicAddress_asm_0 + 0x28,0x5af43d82803e903d91602b57fd5bf3ff00000000000000000000000000000000) (#296)
BuybackBabyToken.constructor(string,string,uint256,address,address,uint256[5],address,uint256) (#1016-1068) uses literals with too many digits:
- distributorGas = 500000 (#1041)
Use: Ether suffix, Time suffix, or The scientific notation

Additional information: link

authorize(address) should be declared external:
- Auth.authorize(address) (#636-638)
unauthorize(address) should be declared external:
- Auth.unauthorize(address) (#643-645)
transferOwnership(address) should be declared external:
- Auth.transferOwnership(address) (#664-668)
setFees(uint256,uint256,uint256,uint256,uint256) should be declared external:
- BuybackBabyToken.setFees(uint256,uint256,uint256,uint256,uint256) (#1411-1425)
Use the external attribute for functions never called from the contract.

Additional information: link

Token seems to be untradeable: there is no PancakeSwap trading pair and no trading volumes. Ignore for presale.

Number of Binance Smart Chain (BSC) token holders is less than 100. Token is either dead or inactive. Ignore for presale.

BscScan page for the token does not contain additional info: website, socials, description, etc.

Additional information: link

Unable to verify that token and website are owned by the same team (no listings + unable to find contract on website)

Unable to verify token contract address on the website

Unable to find whitepaper link on the website

Unable to find token on CoinGecko

Additional information: link

Unable to find token on CoinMarketCap

Additional information: link

Token is not listed at Mobula.Finance

Additional information: link

Unable to find token on CoinHunt

Additional information: link

Unable to find code repository for the project

Young tokens have high risks of scam / price dump / death

Young tokens have high risks of scam / price dump / death

Young tokens have high risks of scam / price dump / death

Token has no active CoinGecko listing / rank

Token has no active CoinMarketCap listing / rank