$BURJDOGE is hyper-deflationary meme token created to combine two of the world´s greatest visions and achievements: Doge and the Burj Khalifa. 💎🚀
BurjDoge is a community project that aims to create an eco system of finance and NFTs. 💰
BurjDoge NFT collection soon!🔥 BIG Airdrop after Fair Launch🎁
Tokenomics:
🙏 6% HODLER REWARD
🌊 4% AUTO LIQUIDITY
🔥 50% BURNT
✅Ownership renounced after Fair Launch✅
🔒Liquidity locked for 10 years - IMPOSSIBLE TO RUG 🔒
Pre Sale investors will receive a free NFT!
BurjDoge.addLiquidity(uint256,uint256) (#1082-1095) sends eth to arbitrary user
Dangerous calls:
- uniswapV2Router.addLiquidityETH{value: ethAmount}(address(this),tokenAmount,0,0,owner(),block.timestamp) (#1087-1094)
Ensure that an arbitrary user cannot withdraw unauthorized funds.
Additional information: link
Reentrancy in BurjDoge._transfer(address,address,uint256) (#995-1039):
External calls:
- swapAndLiquify(contractTokenBalance) (#1026)
- uniswapV2Router.addLiquidityETH{value: ethAmount}(address(this),tokenAmount,0,0,owner(),block.timestamp) (#1087-1094)
- uniswapV2Router.swapExactTokensForETHSupportingFeeOnTransferTokens(tokenAmount,0,path,address(this),block.timestamp) (#1073-1079)
External calls sending eth:
- swapAndLiquify(contractTokenBalance) (#1026)
- uniswapV2Router.addLiquidityETH{value: ethAmount}(address(this),tokenAmount,0,0,owner(),block.timestamp) (#1087-1094)
State variables written after the call(s):
- _tokenTransfer(from,to,amount,takeFee) (#1038)
- _rOwned[address(this)] = _rOwned[address(this)].add(rLiquidity) (#951)
- _rOwned[sender] = _rOwned[sender].sub(rAmount) (#1120)
- _rOwned[sender] = _rOwned[sender].sub(rAmount) (#1129)
- _rOwned[sender] = _rOwned[sender].sub(rAmount) (#867)
- _rOwned[recipient] = _rOwned[recipient].add(rTransferAmount) (#1121)
- _rOwned[sender] = _rOwned[sender].sub(rAmount) (#1140)
- _rOwned[recipient] = _rOwned[recipient].add(rTransferAmount) (#1141)
- _rOwned[recipient] = _rOwned[recipient].add(rTransferAmount) (#1131)
- _rOwned[recipient] = _rOwned[recipient].add(rTransferAmount) (#869)
- _tokenTransfer(from,to,amount,takeFee) (#1038)
- _rTotal = _rTotal.sub(rFee) (#906)
- _tokenTransfer(from,to,amount,takeFee) (#1038)
- _tOwned[address(this)] = _tOwned[address(this)].add(tLiquidity) (#953)
- _tOwned[sender] = _tOwned[sender].sub(tAmount) (#1139)
- _tOwned[sender] = _tOwned[sender].sub(tAmount) (#866)
- _tOwned[recipient] = _tOwned[recipient].add(tTransferAmount) (#1130)
- _tOwned[recipient] = _tOwned[recipient].add(tTransferAmount) (#868)
Apply the check-effects-interactions pattern.
Additional information: link
Unable to find manual contract audit (e.g. Certik, PeckShield, Solidity...)
Combination 1: Reentrancy vulnerabilities + Functions that send Ether to arbitraty destination. Usual for scams. May be justified by some complex mechanics (e.g. rebase, reflections). DYOR & manual audit are advised.
Contract ownership is not renounced (belongs to a wallet)
BurjDoge.addLiquidity(uint256,uint256) (#1082-1095) ignores return value by uniswapV2Router.addLiquidityETH{value: ethAmount}(address(this),tokenAmount,0,0,owner(),block.timestamp) (#1087-1094)
Ensure that all the return values of the function calls are used.
Additional information: link
BurjDoge.allowance(address,address).owner (#782) shadows:
- Ownable.owner() (#412-414) (function)
BurjDoge._approve(address,address,uint256).owner (#987) shadows:
- Ownable.owner() (#412-414) (function)
Rename the local variables that shadow another component.
Additional information: link
BurjDoge.setTaxFeePercent(uint256) (#883-885) should emit an event for:
- _taxFee = taxFee (#884)
BurjDoge.setLiquidityFeePercent(uint256) (#887-889) should emit an event for:
- _liquidityFee = liquidityFee (#888)
BurjDoge.setMaxTxPercent(uint256) (#891-895) should emit an event for:
- _maxTxAmount = _tTotal.mul(maxTxPercent).div(10 ** 2) (#892-894)
Emit an event for critical parameter changes.
Additional information: link
Reentrancy in BurjDoge._transfer(address,address,uint256) (#995-1039):
External calls:
- swapAndLiquify(contractTokenBalance) (#1026)
- uniswapV2Router.addLiquidityETH{value: ethAmount}(address(this),tokenAmount,0,0,owner(),block.timestamp) (#1087-1094)
- uniswapV2Router.swapExactTokensForETHSupportingFeeOnTransferTokens(tokenAmount,0,path,address(this),block.timestamp) (#1073-1079)
External calls sending eth:
- swapAndLiquify(contractTokenBalance) (#1026)
- uniswapV2Router.addLiquidityETH{value: ethAmount}(address(this),tokenAmount,0,0,owner(),block.timestamp) (#1087-1094)
State variables written after the call(s):
- _tokenTransfer(from,to,amount,takeFee) (#1038)
- _liquidityFee = _previousLiquidityFee (#980)
- _liquidityFee = 0 (#975)
- _tokenTransfer(from,to,amount,takeFee) (#1038)
- _previousLiquidityFee = _liquidityFee (#972)
- _tokenTransfer(from,to,amount,takeFee) (#1038)
- _previousTaxFee = _taxFee (#971)
- _tokenTransfer(from,to,amount,takeFee) (#1038)
- _tFeeTotal = _tFeeTotal.add(tFee) (#907)
- _tokenTransfer(from,to,amount,takeFee) (#1038)
- _taxFee = _previousTaxFee (#979)
- _taxFee = 0 (#974)
Reentrancy in BurjDoge.constructor() (#732-748):
External calls:
- uniswapV2Pair = IUniswapV2Factory(_uniswapV2Router.factory()).createPair(address(this),_uniswapV2Router.WETH()) (#737-738)
State variables written after the call(s):
- _isExcludedFromFee[owner()] = true (#744)
- _isExcludedFromFee[address(this)] = true (#745)
- uniswapV2Router = _uniswapV2Router (#741)
Reentrancy in BurjDoge.setRouterAddress(address) (#750-754):
External calls:
- uniswapV2Pair = IUniswapV2Factory(_uniswapV2Router.factory()).createPair(address(this),_uniswapV2Router.WETH()) (#752)
State variables written after the call(s):
- uniswapV2Router = _uniswapV2Router (#753)
Reentrancy in BurjDoge.swapAndLiquify(uint256) (#1041-1062):
External calls:
- swapTokensForEth(half) (#1053)
- uniswapV2Router.swapExactTokensForETHSupportingFeeOnTransferTokens(tokenAmount,0,path,address(this),block.timestamp) (#1073-1079)
- addLiquidity(otherHalf,newBalance) (#1059)
- uniswapV2Router.addLiquidityETH{value: ethAmount}(address(this),tokenAmount,0,0,owner(),block.timestamp) (#1087-1094)
External calls sending eth:
- addLiquidity(otherHalf,newBalance) (#1059)
- uniswapV2Router.addLiquidityETH{value: ethAmount}(address(this),tokenAmount,0,0,owner(),block.timestamp) (#1087-1094)
State variables written after the call(s):
- addLiquidity(otherHalf,newBalance) (#1059)
- _allowances[owner][spender] = amount (#991)
Reentrancy in BurjDoge.transferFrom(address,address,uint256) (#791-795):
External calls:
- _transfer(sender,recipient,amount) (#792)
- uniswapV2Router.addLiquidityETH{value: ethAmount}(address(this),tokenAmount,0,0,owner(),block.timestamp) (#1087-1094)
- uniswapV2Router.swapExactTokensForETHSupportingFeeOnTransferTokens(tokenAmount,0,path,address(this),block.timestamp) (#1073-1079)
External calls sending eth:
- _transfer(sender,recipient,amount) (#792)
- uniswapV2Router.addLiquidityETH{value: ethAmount}(address(this),tokenAmount,0,0,owner(),block.timestamp) (#1087-1094)
State variables written after the call(s):
- _approve(sender,_msgSender(),_allowances[sender][_msgSender()].sub(amount,ERC20: transfer amount exceeds allowance)) (#793)
- _allowances[owner][spender] = amount (#991)
Apply the check-effects-interactions pattern.
Additional information: link
Reentrancy in BurjDoge._transfer(address,address,uint256) (#995-1039):
External calls:
- swapAndLiquify(contractTokenBalance) (#1026)
- uniswapV2Router.addLiquidityETH{value: ethAmount}(address(this),tokenAmount,0,0,owner(),block.timestamp) (#1087-1094)
- uniswapV2Router.swapExactTokensForETHSupportingFeeOnTransferTokens(tokenAmount,0,path,address(this),block.timestamp) (#1073-1079)
External calls sending eth:
- swapAndLiquify(contractTokenBalance) (#1026)
- uniswapV2Router.addLiquidityETH{value: ethAmount}(address(this),tokenAmount,0,0,owner(),block.timestamp) (#1087-1094)
Event emitted after the call(s):
- Transfer(sender,recipient,tTransferAmount) (#1124)
- _tokenTransfer(from,to,amount,takeFee) (#1038)
- Transfer(sender,recipient,tTransferAmount) (#1144)
- _tokenTransfer(from,to,amount,takeFee) (#1038)
- Transfer(sender,recipient,tTransferAmount) (#1134)
- _tokenTransfer(from,to,amount,takeFee) (#1038)
- Transfer(sender,recipient,tTransferAmount) (#872)
- _tokenTransfer(from,to,amount,takeFee) (#1038)
Reentrancy in BurjDoge.constructor() (#732-748):
External calls:
- uniswapV2Pair = IUniswapV2Factory(_uniswapV2Router.factory()).createPair(address(this),_uniswapV2Router.WETH()) (#737-738)
Event emitted after the call(s):
- Transfer(address(0),_msgSender(),_tTotal) (#747)
Reentrancy in BurjDoge.swapAndLiquify(uint256) (#1041-1062):
External calls:
- swapTokensForEth(half) (#1053)
- uniswapV2Router.swapExactTokensForETHSupportingFeeOnTransferTokens(tokenAmount,0,path,address(this),block.timestamp) (#1073-1079)
- addLiquidity(otherHalf,newBalance) (#1059)
- uniswapV2Router.addLiquidityETH{value: ethAmount}(address(this),tokenAmount,0,0,owner(),block.timestamp) (#1087-1094)
External calls sending eth:
- addLiquidity(otherHalf,newBalance) (#1059)
- uniswapV2Router.addLiquidityETH{value: ethAmount}(address(this),tokenAmount,0,0,owner(),block.timestamp) (#1087-1094)
Event emitted after the call(s):
- Approval(owner,spender,amount) (#992)
- addLiquidity(otherHalf,newBalance) (#1059)
- SwapAndLiquify(half,newBalance,otherHalf) (#1061)
Reentrancy in BurjDoge.transferFrom(address,address,uint256) (#791-795):
External calls:
- _transfer(sender,recipient,amount) (#792)
- uniswapV2Router.addLiquidityETH{value: ethAmount}(address(this),tokenAmount,0,0,owner(),block.timestamp) (#1087-1094)
- uniswapV2Router.swapExactTokensForETHSupportingFeeOnTransferTokens(tokenAmount,0,path,address(this),block.timestamp) (#1073-1079)
External calls sending eth:
- _transfer(sender,recipient,amount) (#792)
- uniswapV2Router.addLiquidityETH{value: ethAmount}(address(this),tokenAmount,0,0,owner(),block.timestamp) (#1087-1094)
Event emitted after the call(s):
- Approval(owner,spender,amount) (#992)
- _approve(sender,_msgSender(),_allowances[sender][_msgSender()].sub(amount,ERC20: transfer amount exceeds allowance)) (#793)
Apply the check-effects-interactions pattern.
Additional information: link
Ownable.unlock() (#459-464) uses timestamp for comparisons
Dangerous comparisons:
- require(bool,string)(now > _lockTime,Contract is locked until 7 days) (#461)
Avoid relying on block.timestamp.
Additional information: link
Address.isContract(address) (#264-273) uses assembly
- INLINE ASM (#271)
Address._functionCallWithValue(address,bytes,uint256,string) (#357-378) uses assembly
- INLINE ASM (#370-373)
Do not use evm assembly.
Additional information: link
BurjDoge.includeInReward(address) (#852-863) has costly operations inside a loop:
- _excluded.pop() (#859)
Use a local variable to hold the loop computation result.
Additional information: link
Address._functionCallWithValue(address,bytes,uint256,string) (#357-378) is never used and should be removed
Address.functionCall(address,bytes) (#317-319) is never used and should be removed
Address.functionCall(address,bytes,string) (#327-329) is never used and should be removed
Address.functionCallWithValue(address,bytes,uint256) (#342-344) is never used and should be removed
Address.functionCallWithValue(address,bytes,uint256,string) (#352-355) is never used and should be removed
Address.isContract(address) (#264-273) is never used and should be removed
Address.sendValue(address,uint256) (#291-297) is never used and should be removed
Context._msgData() (#236-239) is never used and should be removed
SafeMath.mod(uint256,uint256) (#209-211) is never used and should be removed
SafeMath.mod(uint256,uint256,string) (#225-228) is never used and should be removed
Remove unused functions.
Additional information: link
BurjDoge._rTotal (#696) is set pre-construction with a non-constant function or state variable:
- (MAX - (MAX % _tTotal))
BurjDoge._previousTaxFee (#704) is set pre-construction with a non-constant function or state variable:
- _taxFee
BurjDoge._previousLiquidityFee (#707) is set pre-construction with a non-constant function or state variable:
- _liquidityFee
Remove any initialization of state variables via non-constant state variables or function calls. If variables must be set upon contract deployment, locate initialization in the constructor instead.
Additional information: link
Low level call in Address.sendValue(address,uint256) (#291-297):
- (success) = recipient.call{value: amount}() (#295)
Low level call in Address._functionCallWithValue(address,bytes,uint256,string) (#357-378):
- (success,returndata) = target.call{value: weiValue}(data) (#361)
Avoid low-level calls. Check the call success. If the call is meant for a contract, check for code existence
Additional information: link
Function IUniswapV2Pair.DOMAIN_SEPARATOR() (#503) is not in mixedCase
Function IUniswapV2Pair.PERMIT_TYPEHASH() (#504) is not in mixedCase
Function IUniswapV2Pair.MINIMUM_LIQUIDITY() (#521) is not in mixedCase
Function IUniswapV2Router01.WETH() (#543) is not in mixedCase
Parameter BurjDoge.setSwapAndLiquifyEnabled(bool)._enabled (#897) is not in mixedCase
Parameter BurjDoge.calculateTaxFee(uint256)._amount (#956) is not in mixedCase
Parameter BurjDoge.calculateLiquidityFee(uint256)._amount (#962) is not in mixedCase
Variable BurjDoge._taxFee (#703) is not in mixedCase
Variable BurjDoge._liquidityFee (#706) is not in mixedCase
Variable BurjDoge._maxTxAmount (#715) is not in mixedCase
Follow the Solidity naming convention.
Additional information: link
Redundant expression "this (#237)" inContext (#231-240)
Remove redundant statements if they congest code but offer no value.
Additional information: link
Variable IUniswapV2Router01.addLiquidity(address,address,uint256,uint256,uint256,uint256,address,uint256).amountADesired (#548) is too similar to IUniswapV2Router01.addLiquidity(address,address,uint256,uint256,uint256,uint256,address,uint256).amountBDesired (#549)
Variable BurjDoge._getRValues(uint256,uint256,uint256,uint256).rTransferAmount (#927) is too similar to BurjDoge._transferToExcluded(address,address,uint256).tTransferAmount (#1128)
Variable BurjDoge._transferStandard(address,address,uint256).rTransferAmount (#1119) is too similar to BurjDoge._transferStandard(address,address,uint256).tTransferAmount (#1119)
Variable BurjDoge._transferFromExcluded(address,address,uint256).rTransferAmount (#1138) is too similar to BurjDoge._transferBothExcluded(address,address,uint256).tTransferAmount (#865)
Variable BurjDoge._getRValues(uint256,uint256,uint256,uint256).rTransferAmount (#927) is too similar to BurjDoge._getTValues(uint256).tTransferAmount (#919)
Variable BurjDoge._transferFromExcluded(address,address,uint256).rTransferAmount (#1138) is too similar to BurjDoge._transferStandard(address,address,uint256).tTransferAmount (#1119)
Variable BurjDoge._getValues(uint256).rTransferAmount (#912) is too similar to BurjDoge._transferStandard(address,address,uint256).tTransferAmount (#1119)
Variable BurjDoge.reflectionFromToken(uint256,bool).rTransferAmount (#830) is too similar to BurjDoge._getTValues(uint256).tTransferAmount (#919)
Variable BurjDoge._getRValues(uint256,uint256,uint256,uint256).rTransferAmount (#927) is too similar to BurjDoge._transferBothExcluded(address,address,uint256).tTransferAmount (#865)
Variable BurjDoge._getRValues(uint256,uint256,uint256,uint256).rTransferAmount (#927) is too similar to BurjDoge._transferStandard(address,address,uint256).tTransferAmount (#1119)
Variable BurjDoge._transferBothExcluded(address,address,uint256).rTransferAmount (#865) is too similar to BurjDoge._getValues(uint256).tTransferAmount (#911)
Variable BurjDoge._transferFromExcluded(address,address,uint256).rTransferAmount (#1138) is too similar to BurjDoge._transferFromExcluded(address,address,uint256).tTransferAmount (#1138)
Variable BurjDoge._transferToExcluded(address,address,uint256).rTransferAmount (#1128) is too similar to BurjDoge._getValues(uint256).tTransferAmount (#911)
Variable BurjDoge.reflectionFromToken(uint256,bool).rTransferAmount (#830) is too similar to BurjDoge._transferStandard(address,address,uint256).tTransferAmount (#1119)
Variable BurjDoge._transferBothExcluded(address,address,uint256).rTransferAmount (#865) is too similar to BurjDoge._transferToExcluded(address,address,uint256).tTransferAmount (#1128)
Variable BurjDoge._transferFromExcluded(address,address,uint256).rTransferAmount (#1138) is too similar to BurjDoge._getValues(uint256).tTransferAmount (#911)
Variable BurjDoge._transferBothExcluded(address,address,uint256).rTransferAmount (#865) is too similar to BurjDoge._getTValues(uint256).tTransferAmount (#919)
Variable BurjDoge._transferToExcluded(address,address,uint256).rTransferAmount (#1128) is too similar to BurjDoge._transferToExcluded(address,address,uint256).tTransferAmount (#1128)
Variable BurjDoge._transferToExcluded(address,address,uint256).rTransferAmount (#1128) is too similar to BurjDoge._getTValues(uint256).tTransferAmount (#919)
Variable BurjDoge._transferBothExcluded(address,address,uint256).rTransferAmount (#865) is too similar to BurjDoge._transferBothExcluded(address,address,uint256).tTransferAmount (#865)
Variable BurjDoge._transferFromExcluded(address,address,uint256).rTransferAmount (#1138) is too similar to BurjDoge._transferToExcluded(address,address,uint256).tTransferAmount (#1128)
Variable BurjDoge._getRValues(uint256,uint256,uint256,uint256).rTransferAmount (#927) is too similar to BurjDoge._getValues(uint256).tTransferAmount (#911)
Variable BurjDoge._transferBothExcluded(address,address,uint256).rTransferAmount (#865) is too similar to BurjDoge._transferStandard(address,address,uint256).tTransferAmount (#1119)
Variable BurjDoge._transferStandard(address,address,uint256).rTransferAmount (#1119) is too similar to BurjDoge._getTValues(uint256).tTransferAmount (#919)
Variable BurjDoge._transferToExcluded(address,address,uint256).rTransferAmount (#1128) is too similar to BurjDoge._transferStandard(address,address,uint256).tTransferAmount (#1119)
Variable BurjDoge._transferFromExcluded(address,address,uint256).rTransferAmount (#1138) is too similar to BurjDoge._getTValues(uint256).tTransferAmount (#919)
Variable BurjDoge._getValues(uint256).rTransferAmount (#912) is too similar to BurjDoge._getTValues(uint256).tTransferAmount (#919)
Variable BurjDoge._transferStandard(address,address,uint256).rTransferAmount (#1119) is too similar to BurjDoge._getValues(uint256).tTransferAmount (#911)
Variable BurjDoge.reflectionFromToken(uint256,bool).rTransferAmount (#830) is too similar to BurjDoge._getValues(uint256).tTransferAmount (#911)
Variable BurjDoge._transferStandard(address,address,uint256).rTransferAmount (#1119) is too similar to BurjDoge._transferToExcluded(address,address,uint256).tTransferAmount (#1128)
Variable BurjDoge._getValues(uint256).rTransferAmount (#912) is too similar to BurjDoge._getValues(uint256).tTransferAmount (#911)
Variable BurjDoge._transferStandard(address,address,uint256).rTransferAmount (#1119) is too similar to BurjDoge._transferFromExcluded(address,address,uint256).tTransferAmount (#1138)
Variable BurjDoge.reflectionFromToken(uint256,bool).rTransferAmount (#830) is too similar to BurjDoge._transferToExcluded(address,address,uint256).tTransferAmount (#1128)
Variable BurjDoge.reflectionFromToken(uint256,bool).rTransferAmount (#830) is too similar to BurjDoge._transferFromExcluded(address,address,uint256).tTransferAmount (#1138)
Variable BurjDoge._getValues(uint256).rTransferAmount (#912) is too similar to BurjDoge._transferToExcluded(address,address,uint256).tTransferAmount (#1128)
Variable BurjDoge._transferBothExcluded(address,address,uint256).rTransferAmount (#865) is too similar to BurjDoge._transferFromExcluded(address,address,uint256).tTransferAmount (#1138)
Variable BurjDoge._getValues(uint256).rTransferAmount (#912) is too similar to BurjDoge._transferFromExcluded(address,address,uint256).tTransferAmount (#1138)
Variable BurjDoge._getRValues(uint256,uint256,uint256,uint256).rTransferAmount (#927) is too similar to BurjDoge._transferFromExcluded(address,address,uint256).tTransferAmount (#1138)
Variable BurjDoge._transferToExcluded(address,address,uint256).rTransferAmount (#1128) is too similar to BurjDoge._transferBothExcluded(address,address,uint256).tTransferAmount (#865)
Variable BurjDoge._transferStandard(address,address,uint256).rTransferAmount (#1119) is too similar to BurjDoge._transferBothExcluded(address,address,uint256).tTransferAmount (#865)
Variable BurjDoge.reflectionFromToken(uint256,bool).rTransferAmount (#830) is too similar to BurjDoge._transferBothExcluded(address,address,uint256).tTransferAmount (#865)
Variable BurjDoge._getValues(uint256).rTransferAmount (#912) is too similar to BurjDoge._transferBothExcluded(address,address,uint256).tTransferAmount (#865)
Variable BurjDoge._transferToExcluded(address,address,uint256).rTransferAmount (#1128) is too similar to BurjDoge._transferFromExcluded(address,address,uint256).tTransferAmount (#1138)
Prevent variables from having similar names.
Additional information: link
BurjDoge.slitherConstructorVariables() (#681-1151) uses literals with too many digits:
- _tTotal = 420000000 * 10 ** 6 * 10 ** 9 (#695)
BurjDoge.slitherConstructorVariables() (#681-1151) uses literals with too many digits:
- _maxTxAmount = 2100000 * 10 ** 6 * 10 ** 9 (#715)
Use: Ether suffix, Time suffix, or The scientific notation
Additional information: link
BurjDoge._decimals (#701) should be constant
BurjDoge._name (#699) should be constant
BurjDoge._symbol (#700) should be constant
BurjDoge._tTotal (#695) should be constant
BurjDoge.numTokensSellToAddToLiquidity (#716) should be constant
Add the constant attributes to state variables that never change.
Additional information: link
renounceOwnership() should be declared external:
- Ownable.renounceOwnership() (#431-434)
transferOwnership(address) should be declared external:
- Ownable.transferOwnership(address) (#440-444)
geUnlockTime() should be declared external:
- Ownable.geUnlockTime() (#446-448)
lock(uint256) should be declared external:
- Ownable.lock(uint256) (#451-456)
unlock() should be declared external:
- Ownable.unlock() (#459-464)
setRouterAddress(address) should be declared external:
- BurjDoge.setRouterAddress(address) (#750-754)
name() should be declared external:
- BurjDoge.name() (#756-758)
symbol() should be declared external:
- BurjDoge.symbol() (#760-762)
decimals() should be declared external:
- BurjDoge.decimals() (#764-766)
totalSupply() should be declared external:
- BurjDoge.totalSupply() (#768-770)
transfer(address,uint256) should be declared external:
- BurjDoge.transfer(address,uint256) (#777-780)
allowance(address,address) should be declared external:
- BurjDoge.allowance(address,address) (#782-784)
approve(address,uint256) should be declared external:
- BurjDoge.approve(address,uint256) (#786-789)
transferFrom(address,address,uint256) should be declared external:
- BurjDoge.transferFrom(address,address,uint256) (#791-795)
increaseAllowance(address,uint256) should be declared external:
- BurjDoge.increaseAllowance(address,uint256) (#797-800)
decreaseAllowance(address,uint256) should be declared external:
- BurjDoge.decreaseAllowance(address,uint256) (#802-805)
isExcludedFromReward(address) should be declared external:
- BurjDoge.isExcludedFromReward(address) (#807-809)
totalFees() should be declared external:
- BurjDoge.totalFees() (#811-813)
deliver(uint256) should be declared external:
- BurjDoge.deliver(uint256) (#815-822)
reflectionFromToken(uint256,bool) should be declared external:
- BurjDoge.reflectionFromToken(uint256,bool) (#824-833)
excludeFromReward(address) should be declared external:
- BurjDoge.excludeFromReward(address) (#841-850)
excludeFromFee(address) should be declared external:
- BurjDoge.excludeFromFee(address) (#875-877)
includeInFee(address) should be declared external:
- BurjDoge.includeInFee(address) (#879-881)
setSwapAndLiquifyEnabled(bool) should be declared external:
- BurjDoge.setSwapAndLiquifyEnabled(bool) (#897-900)
isExcludedFromFee(address) should be declared external:
- BurjDoge.isExcludedFromFee(address) (#983-985)
Use the external attribute for functions never called from the contract.
Additional information: link
Unable to find token/project description on the website or on BscScan, CoinMarketCap
Unable to find token contract audit
Unable to find KYC or doxxing proof
BscScan page for the token does not contain additional info: website, socials, description, etc.
Additional information: link
Unable to find token on CoinHunt
Additional information: link
Unable to find code repository for the project
Unable to find audit link on the website
Unable to find whitepaper link on the website
Unable to find token on CoinGecko
Additional information: link
Unable to find token on CoinMarketCap
Additional information: link
Token is not listed at Mobula.Finance
Additional information: link
Young tokens have high risks of price dump / death
Token has no active CoinGecko listing / rank
Token has no active CoinMarketCap listing / rank
Young tokens have high risks of price dump / death
Young tokens have high risks of price dump / death
Twitter account has less than 100 followers
Telegram account has less than 100 subscribers
Last post in Twitter was more than 30 days ago
Twitter account has few posts
Unable to find Youtube account
Unable to find Discord account