BNDG [BunnyDoge] Token

Unable to find manual contract audit (e.g. Certik, PeckShield, Solidity...)

Reentrancy in BunnyDoge._transfer(address,address,uint256) (#1159-1251):
External calls:
- swapAndLiquify(contractTokenBalance) (#1199)
- uniswapV2Router.addLiquidityETH{value: ethAmount}(address(this),tokenAmount,0,0,owner(),block.timestamp) (#1298-1305)
- uniswapV2Router.swapExactTokensForETHSupportingFeeOnTransferTokens(tokenAmount,0,path,address(this),block.timestamp) (#1284-1290)
- swapAndLiquify(contractTokenBalance) (#1216)
- uniswapV2Router.addLiquidityETH{value: ethAmount}(address(this),tokenAmount,0,0,owner(),block.timestamp) (#1298-1305)
- uniswapV2Router.swapExactTokensForETHSupportingFeeOnTransferTokens(tokenAmount,0,path,address(this),block.timestamp) (#1284-1290)
External calls sending eth:
- swapAndLiquify(contractTokenBalance) (#1199)
- uniswapV2Router.addLiquidityETH{value: ethAmount}(address(this),tokenAmount,0,0,owner(),block.timestamp) (#1298-1305)
- swapAndLiquify(contractTokenBalance) (#1216)
- uniswapV2Router.addLiquidityETH{value: ethAmount}(address(this),tokenAmount,0,0,owner(),block.timestamp) (#1298-1305)
State variables written after the call(s):
- super._transfer(sender,mintContract,_fee.mul(LPSellFees).div(sellFeeRate)) (#1219)
- _balances[sender] = senderBalance - amount (#565)
- _balances[recipient] += amount (#567)
- super._transfer(sender,addressForMarketing,_fee.mul(marketSellFees).div(sellFeeRate)) (#1220)
- _balances[sender] = senderBalance - amount (#565)
- _balances[recipient] += amount (#567)
- super._transfer(sender,BurnAddr,_fee.mul(burnSellFees).div(sellFeeRate)) (#1221)
- _balances[sender] = senderBalance - amount (#565)
- _balances[recipient] += amount (#567)
- swapAndLiquify(contractTokenBalance) (#1216)
- inSwapAndLiquify = true (#1024)
- inSwapAndLiquify = false (#1026)
Reentrancy in BunnyDoge._transfer(address,address,uint256) (#1159-1251):
External calls:
- swapAndLiquify(contractTokenBalance) (#1199)
- uniswapV2Router.addLiquidityETH{value: ethAmount}(address(this),tokenAmount,0,0,owner(),block.timestamp) (#1298-1305)
- uniswapV2Router.swapExactTokensForETHSupportingFeeOnTransferTokens(tokenAmount,0,path,address(this),block.timestamp) (#1284-1290)
- swapAndLiquify(contractTokenBalance) (#1237)
- uniswapV2Router.addLiquidityETH{value: ethAmount}(address(this),tokenAmount,0,0,owner(),block.timestamp) (#1298-1305)
- uniswapV2Router.swapExactTokensForETHSupportingFeeOnTransferTokens(tokenAmount,0,path,address(this),block.timestamp) (#1284-1290)
External calls sending eth:
- swapAndLiquify(contractTokenBalance) (#1199)
- uniswapV2Router.addLiquidityETH{value: ethAmount}(address(this),tokenAmount,0,0,owner(),block.timestamp) (#1298-1305)
- swapAndLiquify(contractTokenBalance) (#1237)
- uniswapV2Router.addLiquidityETH{value: ethAmount}(address(this),tokenAmount,0,0,owner(),block.timestamp) (#1298-1305)
State variables written after the call(s):
- super._transfer(sender,mintContract,_fee_scope_0.mul(LPBuyFees).div(buyFeeRate)) (#1242)
- _balances[sender] = senderBalance - amount (#565)
- _balances[recipient] += amount (#567)
- super._transfer(sender,addressForMarketing,_fee_scope_0.mul(marketBuyFees).div(buyFeeRate)) (#1243)
- _balances[sender] = senderBalance - amount (#565)
- _balances[recipient] += amount (#567)
- super._transfer(sender,BurnAddr,_fee_scope_0.mul(burnBuyFees).div(buyFeeRate)) (#1244)
- _balances[sender] = senderBalance - amount (#565)
- _balances[recipient] += amount (#567)
- buyIndex = 0 (#1238)
- buyIndex = buyIndex + 1 (#1246)
- swapAndLiquify(contractTokenBalance) (#1237)
- inSwapAndLiquify = true (#1024)
- inSwapAndLiquify = false (#1026)
Reentrancy in BunnyDoge._transfer(address,address,uint256) (#1159-1251):
External calls:
- swapAndLiquify(contractTokenBalance) (#1199)
- uniswapV2Router.addLiquidityETH{value: ethAmount}(address(this),tokenAmount,0,0,owner(),block.timestamp) (#1298-1305)
- uniswapV2Router.swapExactTokensForETHSupportingFeeOnTransferTokens(tokenAmount,0,path,address(this),block.timestamp) (#1284-1290)
- swapAndLiquify(contractTokenBalance) (#1216)
- uniswapV2Router.addLiquidityETH{value: ethAmount}(address(this),tokenAmount,0,0,owner(),block.timestamp) (#1298-1305)
- uniswapV2Router.swapExactTokensForETHSupportingFeeOnTransferTokens(tokenAmount,0,path,address(this),block.timestamp) (#1284-1290)
- swapAndLiquify(contractTokenBalance) (#1237)
- uniswapV2Router.addLiquidityETH{value: ethAmount}(address(this),tokenAmount,0,0,owner(),block.timestamp) (#1298-1305)
- uniswapV2Router.swapExactTokensForETHSupportingFeeOnTransferTokens(tokenAmount,0,path,address(this),block.timestamp) (#1284-1290)
External calls sending eth:
- swapAndLiquify(contractTokenBalance) (#1199)
- uniswapV2Router.addLiquidityETH{value: ethAmount}(address(this),tokenAmount,0,0,owner(),block.timestamp) (#1298-1305)
- swapAndLiquify(contractTokenBalance) (#1216)
- uniswapV2Router.addLiquidityETH{value: ethAmount}(address(this),tokenAmount,0,0,owner(),block.timestamp) (#1298-1305)
- swapAndLiquify(contractTokenBalance) (#1237)
- uniswapV2Router.addLiquidityETH{value: ethAmount}(address(this),tokenAmount,0,0,owner(),block.timestamp) (#1298-1305)
State variables written after the call(s):
- super._transfer(sender,recipient,amount) (#1250)
- _balances[sender] = senderBalance - amount (#565)
- _balances[recipient] += amount (#567)
Apply the check-effects-interactions pattern.

Additional information: link

BunnyDoge._totalSupply (#989) shadows:
- ERC20._totalSupply (#371)
Remove the state variable shadowing.

Additional information: link

BunnyDoge.isBlacklisted (#1021) is never initialized. It is used in:
- BunnyDoge._transfer(address,address,uint256) (#1159-1251)
Initialize all the variables. If a variable is meant to be initialized to zero, explicitly set it to zero to improve code readability.

Additional information: link

BunnyDoge._transfer(address,address,uint256) (#1159-1251) performs a multiplication on the result of a division:
-_fee_scope_0 = amount.mul(buyFeeRate).div(100) (#1241)
-super._transfer(sender,mintContract,_fee_scope_0.mul(LPBuyFees).div(buyFeeRate)) (#1242)
BunnyDoge._transfer(address,address,uint256) (#1159-1251) performs a multiplication on the result of a division:
-_fee = amount.mul(sellFeeRate).div(100) (#1218)
-super._transfer(sender,mintContract,_fee.mul(LPSellFees).div(sellFeeRate)) (#1219)
BunnyDoge._transfer(address,address,uint256) (#1159-1251) performs a multiplication on the result of a division:
-_fee_scope_0 = amount.mul(buyFeeRate).div(100) (#1241)
-super._transfer(sender,addressForMarketing,_fee_scope_0.mul(marketBuyFees).div(buyFeeRate)) (#1243)
BunnyDoge._transfer(address,address,uint256) (#1159-1251) performs a multiplication on the result of a division:
-_fee = amount.mul(sellFeeRate).div(100) (#1218)
-super._transfer(sender,addressForMarketing,_fee.mul(marketSellFees).div(sellFeeRate)) (#1220)
BunnyDoge._transfer(address,address,uint256) (#1159-1251) performs a multiplication on the result of a division:
-_fee = amount.mul(sellFeeRate).div(100) (#1218)
-super._transfer(sender,BurnAddr,_fee.mul(burnSellFees).div(sellFeeRate)) (#1221)
BunnyDoge._transfer(address,address,uint256) (#1159-1251) performs a multiplication on the result of a division:
-_fee_scope_0 = amount.mul(buyFeeRate).div(100) (#1241)
-super._transfer(sender,BurnAddr,_fee_scope_0.mul(burnBuyFees).div(buyFeeRate)) (#1244)
Consider ordering multiplication before division.

Additional information: link

BunnyDoge.addLiquidity(uint256,uint256) (#1293-1306) ignores return value by uniswapV2Router.addLiquidityETH{value: ethAmount}(address(this),tokenAmount,0,0,owner(),block.timestamp) (#1298-1305)
Ensure that all the return values of the function calls are used.

Additional information: link

BunnyDoge.SetBuyValues(uint256,uint256,uint256).burn (#1309) shadows:
- ERC20Burnable.burn(uint256) (#699-701) (function)
BunnyDoge.SetSellValues(uint256,uint256,uint256).burn (#1324) shadows:
- ERC20Burnable.burn(uint256) (#699-701) (function)
Rename the local variables that shadow another component.

Additional information: link

BunnyDoge.antiBot(uint256) (#1106-1113) should emit an event for:
- antiBotAmount = amount (#1110)
BunnyDoge.setMaxWalletPercent(uint256) (#1117-1120) should emit an event for:
- _maxWalletToken = _totalSupply.mul(maxWallPercent).div(10000) (#1118)
BunnyDoge.SetMaxTxAmount(uint256) (#1140-1142) should emit an event for:
- _maxTxAmount = newMaxAmount (#1141)
BunnyDoge.SetBuyValues(uint256,uint256,uint256) (#1309-1314) should emit an event for:
- LPBuyFees = lp (#1310)
- marketBuyFees = market (#1311)
- burnBuyFees = burn (#1312)
BunnyDoge.SetBuyIndexSellLiquify(uint256) (#1316-1318) should emit an event for:
- buyIndexSellLiquify = newBuyIndexSellLiquify (#1317)
BunnyDoge.SetLpNum(uint256) (#1320-1322) should emit an event for:
- lpNum = lp (#1321)
BunnyDoge.SetSellValues(uint256,uint256,uint256) (#1324-1328) should emit an event for:
- LPSellFees = lp (#1325)
- marketSellFees = market (#1326)
- burnSellFees = burn (#1327)
Emit an event for critical parameter changes.

Additional information: link

BunnyDoge.SetMintContract(address).contrat_addr (#1131) lacks a zero-check on :
- mintContract = contrat_addr (#1133)
BunnyDoge.SetAddressForMarketing(address).newAddress (#1136) lacks a zero-check on :
- addressForMarketing = newAddress (#1137)
BunnyDoge.swapTokensForEthForOwner(address).recipient (#1330) lacks a zero-check on :
- address(recipient).transfer(address(this).balance) (#1334)
Check that the address is not zero.

Additional information: link

Reentrancy in BunnyDoge._transfer(address,address,uint256) (#1159-1251):
External calls:
- swapAndLiquify(contractTokenBalance) (#1199)
- uniswapV2Router.addLiquidityETH{value: ethAmount}(address(this),tokenAmount,0,0,owner(),block.timestamp) (#1298-1305)
- uniswapV2Router.swapExactTokensForETHSupportingFeeOnTransferTokens(tokenAmount,0,path,address(this),block.timestamp) (#1284-1290)
- swapAndLiquify(contractTokenBalance) (#1216)
- uniswapV2Router.addLiquidityETH{value: ethAmount}(address(this),tokenAmount,0,0,owner(),block.timestamp) (#1298-1305)
- uniswapV2Router.swapExactTokensForETHSupportingFeeOnTransferTokens(tokenAmount,0,path,address(this),block.timestamp) (#1284-1290)
External calls sending eth:
- swapAndLiquify(contractTokenBalance) (#1199)
- uniswapV2Router.addLiquidityETH{value: ethAmount}(address(this),tokenAmount,0,0,owner(),block.timestamp) (#1298-1305)
- swapAndLiquify(contractTokenBalance) (#1216)
- uniswapV2Router.addLiquidityETH{value: ethAmount}(address(this),tokenAmount,0,0,owner(),block.timestamp) (#1298-1305)
State variables written after the call(s):
- swapAndLiquify(contractTokenBalance) (#1216)
- _allowances[owner][spender] = amount (#644)
Reentrancy in BunnyDoge._transfer(address,address,uint256) (#1159-1251):
External calls:
- swapAndLiquify(contractTokenBalance) (#1199)
- uniswapV2Router.addLiquidityETH{value: ethAmount}(address(this),tokenAmount,0,0,owner(),block.timestamp) (#1298-1305)
- uniswapV2Router.swapExactTokensForETHSupportingFeeOnTransferTokens(tokenAmount,0,path,address(this),block.timestamp) (#1284-1290)
- swapAndLiquify(contractTokenBalance) (#1237)
- uniswapV2Router.addLiquidityETH{value: ethAmount}(address(this),tokenAmount,0,0,owner(),block.timestamp) (#1298-1305)
- uniswapV2Router.swapExactTokensForETHSupportingFeeOnTransferTokens(tokenAmount,0,path,address(this),block.timestamp) (#1284-1290)
External calls sending eth:
- swapAndLiquify(contractTokenBalance) (#1199)
- uniswapV2Router.addLiquidityETH{value: ethAmount}(address(this),tokenAmount,0,0,owner(),block.timestamp) (#1298-1305)
- swapAndLiquify(contractTokenBalance) (#1237)
- uniswapV2Router.addLiquidityETH{value: ethAmount}(address(this),tokenAmount,0,0,owner(),block.timestamp) (#1298-1305)
State variables written after the call(s):
- swapAndLiquify(contractTokenBalance) (#1237)
- _allowances[owner][spender] = amount (#644)
Reentrancy in BunnyDoge.constructor() (#1049-1075):
External calls:
- uniswapV2Pair = _uniswapV2Factory.createPair(address(this),_uniswapV2Router.WETH()) (#1070)
State variables written after the call(s):
- uniswapV2Router = _uniswapV2Router (#1072)
Reentrancy in BunnyDoge.swapAndLiquify(uint256) (#1262-1276):
External calls:
- swapTokensForEth(half) (#1269)
- uniswapV2Router.swapExactTokensForETHSupportingFeeOnTransferTokens(tokenAmount,0,path,address(this),block.timestamp) (#1284-1290)
- addLiquidity(otherHalf,newBalance) (#1273)
- uniswapV2Router.addLiquidityETH{value: ethAmount}(address(this),tokenAmount,0,0,owner(),block.timestamp) (#1298-1305)
External calls sending eth:
- addLiquidity(otherHalf,newBalance) (#1273)
- uniswapV2Router.addLiquidityETH{value: ethAmount}(address(this),tokenAmount,0,0,owner(),block.timestamp) (#1298-1305)
State variables written after the call(s):
- addLiquidity(otherHalf,newBalance) (#1273)
- _allowances[owner][spender] = amount (#644)
Apply the check-effects-interactions pattern.

Additional information: link

Reentrancy in BunnyDoge._transfer(address,address,uint256) (#1159-1251):
External calls:
- swapAndLiquify(contractTokenBalance) (#1199)
- uniswapV2Router.addLiquidityETH{value: ethAmount}(address(this),tokenAmount,0,0,owner(),block.timestamp) (#1298-1305)
- uniswapV2Router.swapExactTokensForETHSupportingFeeOnTransferTokens(tokenAmount,0,path,address(this),block.timestamp) (#1284-1290)
- swapAndLiquify(contractTokenBalance) (#1216)
- uniswapV2Router.addLiquidityETH{value: ethAmount}(address(this),tokenAmount,0,0,owner(),block.timestamp) (#1298-1305)
- uniswapV2Router.swapExactTokensForETHSupportingFeeOnTransferTokens(tokenAmount,0,path,address(this),block.timestamp) (#1284-1290)
External calls sending eth:
- swapAndLiquify(contractTokenBalance) (#1199)
- uniswapV2Router.addLiquidityETH{value: ethAmount}(address(this),tokenAmount,0,0,owner(),block.timestamp) (#1298-1305)
- swapAndLiquify(contractTokenBalance) (#1216)
- uniswapV2Router.addLiquidityETH{value: ethAmount}(address(this),tokenAmount,0,0,owner(),block.timestamp) (#1298-1305)
Event emitted after the call(s):
- Approval(owner,spender,amount) (#645)
- swapAndLiquify(contractTokenBalance) (#1216)
- SwapAndLiquify(half,newBalance,otherHalf) (#1275)
- swapAndLiquify(contractTokenBalance) (#1216)
- Transfer(sender,recipient,amount) (#569)
- super._transfer(sender,mintContract,_fee.mul(LPSellFees).div(sellFeeRate)) (#1219)
- Transfer(sender,recipient,amount) (#569)
- super._transfer(sender,BurnAddr,_fee.mul(burnSellFees).div(sellFeeRate)) (#1221)
- Transfer(sender,recipient,amount) (#569)
- super._transfer(sender,addressForMarketing,_fee.mul(marketSellFees).div(sellFeeRate)) (#1220)
Reentrancy in BunnyDoge._transfer(address,address,uint256) (#1159-1251):
External calls:
- swapAndLiquify(contractTokenBalance) (#1199)
- uniswapV2Router.addLiquidityETH{value: ethAmount}(address(this),tokenAmount,0,0,owner(),block.timestamp) (#1298-1305)
- uniswapV2Router.swapExactTokensForETHSupportingFeeOnTransferTokens(tokenAmount,0,path,address(this),block.timestamp) (#1284-1290)
- swapAndLiquify(contractTokenBalance) (#1237)
- uniswapV2Router.addLiquidityETH{value: ethAmount}(address(this),tokenAmount,0,0,owner(),block.timestamp) (#1298-1305)
- uniswapV2Router.swapExactTokensForETHSupportingFeeOnTransferTokens(tokenAmount,0,path,address(this),block.timestamp) (#1284-1290)
External calls sending eth:
- swapAndLiquify(contractTokenBalance) (#1199)
- uniswapV2Router.addLiquidityETH{value: ethAmount}(address(this),tokenAmount,0,0,owner(),block.timestamp) (#1298-1305)
- swapAndLiquify(contractTokenBalance) (#1237)
- uniswapV2Router.addLiquidityETH{value: ethAmount}(address(this),tokenAmount,0,0,owner(),block.timestamp) (#1298-1305)
Event emitted after the call(s):
- Approval(owner,spender,amount) (#645)
- swapAndLiquify(contractTokenBalance) (#1237)
- SwapAndLiquify(half,newBalance,otherHalf) (#1275)
- swapAndLiquify(contractTokenBalance) (#1237)
- Transfer(sender,recipient,amount) (#569)
- super._transfer(sender,mintContract,_fee_scope_0.mul(LPBuyFees).div(buyFeeRate)) (#1242)
- Transfer(sender,recipient,amount) (#569)
- super._transfer(sender,BurnAddr,_fee_scope_0.mul(burnBuyFees).div(buyFeeRate)) (#1244)
- Transfer(sender,recipient,amount) (#569)
- super._transfer(sender,addressForMarketing,_fee_scope_0.mul(marketBuyFees).div(buyFeeRate)) (#1243)
Reentrancy in BunnyDoge._transfer(address,address,uint256) (#1159-1251):
External calls:
- swapAndLiquify(contractTokenBalance) (#1199)
- uniswapV2Router.addLiquidityETH{value: ethAmount}(address(this),tokenAmount,0,0,owner(),block.timestamp) (#1298-1305)
- uniswapV2Router.swapExactTokensForETHSupportingFeeOnTransferTokens(tokenAmount,0,path,address(this),block.timestamp) (#1284-1290)
- swapAndLiquify(contractTokenBalance) (#1216)
- uniswapV2Router.addLiquidityETH{value: ethAmount}(address(this),tokenAmount,0,0,owner(),block.timestamp) (#1298-1305)
- uniswapV2Router.swapExactTokensForETHSupportingFeeOnTransferTokens(tokenAmount,0,path,address(this),block.timestamp) (#1284-1290)
- swapAndLiquify(contractTokenBalance) (#1237)
- uniswapV2Router.addLiquidityETH{value: ethAmount}(address(this),tokenAmount,0,0,owner(),block.timestamp) (#1298-1305)
- uniswapV2Router.swapExactTokensForETHSupportingFeeOnTransferTokens(tokenAmount,0,path,address(this),block.timestamp) (#1284-1290)
External calls sending eth:
- swapAndLiquify(contractTokenBalance) (#1199)
- uniswapV2Router.addLiquidityETH{value: ethAmount}(address(this),tokenAmount,0,0,owner(),block.timestamp) (#1298-1305)
- swapAndLiquify(contractTokenBalance) (#1216)
- uniswapV2Router.addLiquidityETH{value: ethAmount}(address(this),tokenAmount,0,0,owner(),block.timestamp) (#1298-1305)
- swapAndLiquify(contractTokenBalance) (#1237)
- uniswapV2Router.addLiquidityETH{value: ethAmount}(address(this),tokenAmount,0,0,owner(),block.timestamp) (#1298-1305)
Event emitted after the call(s):
- Transfer(sender,recipient,amount) (#569)
- super._transfer(sender,recipient,amount) (#1250)
Reentrancy in BunnyDoge.swapAndLiquify(uint256) (#1262-1276):
External calls:
- swapTokensForEth(half) (#1269)
- uniswapV2Router.swapExactTokensForETHSupportingFeeOnTransferTokens(tokenAmount,0,path,address(this),block.timestamp) (#1284-1290)
- addLiquidity(otherHalf,newBalance) (#1273)
- uniswapV2Router.addLiquidityETH{value: ethAmount}(address(this),tokenAmount,0,0,owner(),block.timestamp) (#1298-1305)
External calls sending eth:
- addLiquidity(otherHalf,newBalance) (#1273)
- uniswapV2Router.addLiquidityETH{value: ethAmount}(address(this),tokenAmount,0,0,owner(),block.timestamp) (#1298-1305)
Event emitted after the call(s):
- Approval(owner,spender,amount) (#645)
- addLiquidity(otherHalf,newBalance) (#1273)
- SwapAndLiquify(half,newBalance,otherHalf) (#1275)
Apply the check-effects-interactions pattern.

Additional information: link

BunnyDoge._transfer(address,address,uint256) (#1159-1251) uses timestamp for comparisons
Dangerous comparisons:
- botAddresses[sender] && amount > antiBotAmount && antiBotTime > block.timestamp (#1165-1167)
Avoid relying on block.timestamp.

Additional information: link

Context._msgData() (#236-238) is never used and should be removed
Ownable._setMasert(address) (#812-816) is never used and should be removed
SafeMath.add(uint256,uint256) (#85-87) is never used and should be removed
SafeMath.div(uint256,uint256,string) (#183-192) is never used and should be removed
SafeMath.mod(uint256,uint256) (#143-145) is never used and should be removed
SafeMath.mod(uint256,uint256,string) (#209-218) is never used and should be removed
SafeMath.sub(uint256,uint256,string) (#160-169) is never used and should be removed
SafeMath.tryAdd(uint256,uint256) (#14-20) is never used and should be removed
SafeMath.tryDiv(uint256,uint256) (#56-61) is never used and should be removed
SafeMath.tryMod(uint256,uint256) (#68-73) is never used and should be removed
SafeMath.tryMul(uint256,uint256) (#39-49) is never used and should be removed
SafeMath.trySub(uint256,uint256) (#27-32) is never used and should be removed
Remove unused functions.

Additional information: link

BunnyDoge.numTokensSellToAddToLiquidity (#995) is set pre-construction with a non-constant function or state variable:
- lpNum * 10 ** 18
BunnyDoge._maxBuyTxAmount (#1013) is set pre-construction with a non-constant function or state variable:
- _totalSupply * 200 / 10000
BunnyDoge._maxSellTxAmount (#1014) is set pre-construction with a non-constant function or state variable:
- _totalSupply * 100 / 10000
BunnyDoge._maxWalletToken (#1015) is set pre-construction with a non-constant function or state variable:
- (_totalSupply * 400) / 10000
BunnyDoge.sellFeeRate (#1040) is set pre-construction with a non-constant function or state variable:
- LPSellFees.add(marketSellFees).add(burnSellFees)
BunnyDoge.buyFeeRate (#1045) is set pre-construction with a non-constant function or state variable:
- LPBuyFees.add(marketBuyFees).add(burnBuyFees)
Remove any initialization of state variables via non-constant state variables or function calls. If variables must be set upon contract deployment, locate initialization in the constructor instead.

Additional information: link

Pragma version^0.8.2 (#5) allows old versions
solc-0.8.2 is not recommended for deployment
Deploy with any of the following Solidity versions: 0.5.16 - 0.5.17, 0.6.11 - 0.6.12, 0.7.5 - 0.7.6 Use a simple pragma version that allows any of these versions. Consider using the latest version of Solidity for testing.

Additional information: link

Function IUniswapV2Router01.WETH() (#839) is not in mixedCase
Parameter BunnyDoge.setBotAddresses(address[])._addresses (#1089) is not in mixedCase
Parameter BunnyDoge.addBotAddress(address)._address (#1097) is not in mixedCase
Function BunnyDoge.SetMintContract(address) (#1131-1134) is not in mixedCase
Parameter BunnyDoge.SetMintContract(address).contrat_addr (#1131) is not in mixedCase
Function BunnyDoge.SetAddressForMarketing(address) (#1136-1138) is not in mixedCase
Function BunnyDoge.SetMaxTxAmount(uint256) (#1140-1142) is not in mixedCase
Function BunnyDoge.SetSwapAndLiquifyEnabled(bool) (#1144-1146) is not in mixedCase
Function BunnyDoge.SetSwapSellLiquifyEnabled(bool) (#1148-1150) is not in mixedCase
Function BunnyDoge.SetSwapBuyLiquifyEnabled(bool) (#1152-1154) is not in mixedCase
Function BunnyDoge.SetBuyValues(uint256,uint256,uint256) (#1309-1314) is not in mixedCase
Function BunnyDoge.SetBuyIndexSellLiquify(uint256) (#1316-1318) is not in mixedCase
Function BunnyDoge.SetLpNum(uint256) (#1320-1322) is not in mixedCase
Function BunnyDoge.SetSellValues(uint256,uint256,uint256) (#1324-1328) is not in mixedCase
Variable BunnyDoge._totalSupply (#989) is not in mixedCase
Variable BunnyDoge.BurnAddr (#981) is not in mixedCase
Variable BunnyDoge.ZERO (#982) is not in mixedCase
Variable BunnyDoge._maxTxAmount (#991) is not in mixedCase
Variable BunnyDoge._maxBuyTxAmount (#1013) is not in mixedCase
Variable BunnyDoge._maxSellTxAmount (#1014) is not in mixedCase
Variable BunnyDoge._maxWalletToken (#1015) is not in mixedCase
Variable BunnyDoge.LPSellFees (#1037) is not in mixedCase
Variable BunnyDoge.LPBuyFees (#1042) is not in mixedCase
Follow the Solidity naming convention.

Additional information: link

Variable IUniswapV2Router01.addLiquidity(address,address,uint256,uint256,uint256,uint256,address,uint256).amountADesired (#844) is too similar to IUniswapV2Router01.addLiquidity(address,address,uint256,uint256,uint256,uint256,address,uint256).amountBDesired (#845)
Prevent variables from having similar names.

Additional information: link

BunnyDoge.slitherConstructorVariables() (#976-1377) uses literals with too many digits:
- _totalSupply = 100000000000 * 10 ** 18 (#989)
BunnyDoge.slitherConstructorVariables() (#976-1377) uses literals with too many digits:
- BurnAddr = 0x000000000000000000000000000000000000dEaD (#981)
BunnyDoge.slitherConstructorVariables() (#976-1377) uses literals with too many digits:
- ZERO = 0x0000000000000000000000000000000000000000 (#982)
BunnyDoge.slitherConstructorVariables() (#976-1377) uses literals with too many digits:
- _maxTxAmount = 100000000000 * 10 ** 18 (#991)
BunnyDoge.slitherConstructorVariables() (#976-1377) uses literals with too many digits:
- lpNum = 18000000 (#993)
Use: Ether suffix, Time suffix, or The scientific notation

Additional information: link

BunnyDoge.isDividendExempt (#1020) is never used in BunnyDoge (#976-1377)
Remove unused state variables.

Additional information: link

BunnyDoge.BurnAddr (#981) should be constant
BunnyDoge.ZERO (#982) should be constant
BunnyDoge._totalSupply (#989) should be constant
BunnyDoge.antiBotDuration (#1032) should be constant
Add the constant attributes to state variables that never change.

Additional information: link

name() should be declared external:
- ERC20.name() (#393-395)
symbol() should be declared external:
- ERC20.symbol() (#401-403)
decimals() should be declared external:
- BunnyDoge.decimals() (#1083-1085)
- ERC20.decimals() (#418-420)
totalSupply() should be declared external:
- ERC20.totalSupply() (#425-427)
transfer(address,uint256) should be declared external:
- ERC20.transfer(address,uint256) (#444-447)
approve(address,uint256) should be declared external:
- ERC20.approve(address,uint256) (#463-466)
transferFrom(address,address,uint256) should be declared external:
- ERC20.transferFrom(address,address,uint256) (#481-495)
increaseAllowance(address,uint256) should be declared external:
- ERC20.increaseAllowance(address,uint256) (#509-512)
decreaseAllowance(address,uint256) should be declared external:
- ERC20.decreaseAllowance(address,uint256) (#528-536)
burn(uint256) should be declared external:
- ERC20Burnable.burn(uint256) (#699-701)
burnFrom(address,uint256) should be declared external:
- ERC20Burnable.burnFrom(address,uint256) (#714-721)
renounceOwnerMaster() should be declared external:
- Ownable.renounceOwnerMaster() (#773-776)
renounceOwnership() should be declared external:
- Ownable.renounceOwnership() (#793-795)
transferOwnership(address) should be declared external:
- Ownable.transferOwnership(address) (#801-804)
excludeFromFee(address) should be declared external:
- BunnyDoge.excludeFromFee(address) (#1123-1125)
includeInFee(address) should be declared external:
- BunnyDoge.includeInFee(address) (#1127-1129)
swapTokensForEthForOwner(address) should be declared external:
- BunnyDoge.swapTokensForEthForOwner(address) (#1330-1335)
getCirculatingSupply() should be declared external:
- BunnyDoge.getCirculatingSupply() (#1358-1360)
Use the external attribute for functions never called from the contract.

Additional information: link

Token seems to be untradeable: there is no PancakeSwap trading pair and no trading volumes. Ignore for presale.

Number of Binance Smart Chain (BSC) token holders is less than 100. Token is either dead or inactive. Ignore for presale.

BscScan page for the token does not contain additional info: website, socials, description, etc.

Additional information: link

Unable to find token/project description on the website or on BscScan, CoinMarketCap

Unable to find token contract audit

Unable to verify that token and website are owned by the same team (no listings + unable to find contract on website)

Unable to verify token contract address on the website

Unable to find audit link on the website

Unable to find whitepaper link on the website

Unable to find token on CoinGecko

Additional information: link

Unable to find token on CoinMarketCap

Additional information: link

Unable to find token on CoinHunt

Additional information: link

Unable to find code repository for the project

Young tokens have high risks of scam / price dump / death

Young tokens have high risks of scam / price dump / death

Token has no active CoinGecko listing / rank

Token has no active CoinMarketCap listing / rank